| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of Code Aurora Forum, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _PLATFORM_MSMCOPPER_IOMAP_H_ |
| #define _PLATFORM_MSMCOPPER_IOMAP_H_ |
| |
| #define MSM_IOMAP_BASE 0xF9000000 |
| #define MSM_IOMAP_END 0xFEFFFFFF |
| |
| #define SDRAM_START_ADDR 0x00000000 |
| #define SDRAM_SEC_BANK_START_ADDR 0x10000000 |
| |
| #define MSM_SHARED_BASE 0x0FA00000 |
| |
| #define RPM_MSG_RAM_BASE 0xFC42B000 |
| #define RESTART_REASON_ADDR (RPM_MSG_RAM_BASE + 0x65C) |
| |
| #define KPSS_BASE 0xF9000000 |
| |
| #define MSM_GIC_DIST_BASE KPSS_BASE |
| #define MSM_GIC_CPU_BASE (KPSS_BASE + 0x2000) |
| #define APCS_KPSS_ACS_BASE (KPSS_BASE + 0x00008000) |
| #define APCS_APC_KPSS_PLL_BASE (KPSS_BASE + 0x0000A000) |
| #define APCS_KPSS_CFG_BASE (KPSS_BASE + 0x00010000) |
| #define APCS_KPSS_WDT_BASE (KPSS_BASE + 0x00017000) |
| #define KPSS_APCS_QTMR_AC_BASE (KPSS_BASE + 0x00020000) |
| #define KPSS_APCS_F0_QTMR_V1_BASE (KPSS_BASE + 0x00021000) |
| #define QTMR_BASE KPSS_APCS_F0_QTMR_V1_BASE |
| |
| #define PERIPH_SS_BASE 0xF9800000 |
| |
| #define MSM_SDC1_BAM_BASE (PERIPH_SS_BASE + 0x00004000) |
| #define MSM_SDC1_BASE (PERIPH_SS_BASE + 0x00024000) |
| #define MSM_SDC1_DML_BASE (PERIPH_SS_BASE + 0x00024800) |
| #define MSM_SDC3_BAM_BASE (PERIPH_SS_BASE + 0x00044000) |
| #define MSM_SDC3_BASE (PERIPH_SS_BASE + 0x00064000) |
| #define MSM_SDC3_DML_BASE (PERIPH_SS_BASE + 0x00064800) |
| #define MSM_SDC2_BAM_BASE (PERIPH_SS_BASE + 0x00084000) |
| #define MSM_SDC2_BASE (PERIPH_SS_BASE + 0x000A4000) |
| #define MSM_SDC2_DML_BASE (PERIPH_SS_BASE + 0x000A4800) |
| #define MSM_SDC4_BAM_BASE (PERIPH_SS_BASE + 0x000C4000) |
| #define MSM_SDC4_BASE (PERIPH_SS_BASE + 0x000E4000) |
| #define MSM_SDC4_DML_BASE (PERIPH_SS_BASE + 0x000E4800) |
| |
| #define BLSP1_UART0_BASE (PERIPH_SS_BASE + 0x0011D000) |
| #define BLSP1_UART1_BASE (PERIPH_SS_BASE + 0x0011E000) |
| #define BLSP1_UART2_BASE (PERIPH_SS_BASE + 0x0011F000) |
| #define BLSP1_UART3_BASE (PERIPH_SS_BASE + 0x00120000) |
| #define BLSP1_UART4_BASE (PERIPH_SS_BASE + 0x00121000) |
| #define BLSP1_UART5_BASE (PERIPH_SS_BASE + 0x00122000) |
| #define MSM_USB_BASE (PERIPH_SS_BASE + 0x00255000) |
| |
| #define CLK_CTL_BASE 0xFC400000 |
| #define USB_HS_BCR (CLK_CTL_BASE + 0x480) |
| #define USB_BOOT_CLOCK_CTL (CLK_CTL_BASE + 0x1A00) |
| |
| #define SPMI_BASE 0xFC4C0000 |
| #define SPMI_GENI_BASE (SPMI_BASE + 0xA000) |
| #define SPMI_PIC_BASE (SPMI_BASE + 0xB000) |
| |
| #define TLMM_BASE_ADDR 0xFD510000 |
| #define GPIO_CONFIG_ADDR(x) (TLMM_BASE_ADDR + 0x1000 + (x)*0x10) |
| #define GPIO_IN_OUT_ADDR(x) (TLMM_BASE_ADDR + 0x1004 + (x)*0x10) |
| |
| #define MPM2_MPM_CTRL_BASE 0xFC4A1000 |
| #define MPM2_MPM_PS_HOLD 0xFC4AB000 |
| |
| /* GPLL */ |
| #define GPLL0_STATUS (CLK_CTL_BASE + 0x001C) |
| #define APCS_GPLL_ENA_VOTE (CLK_CTL_BASE + 0x1480) |
| #define APCS_CLOCK_BRANCH_ENA_VOTE (CLK_CTL_BASE + 0x1484) |
| |
| /* SDCC */ |
| #define SDCC1_BCR (CLK_CTL_BASE + 0x4C0) /* block reset */ |
| #define SDCC1_APPS_CBCR (CLK_CTL_BASE + 0x4C4) /* branch control */ |
| #define SDCC1_AHB_CBCR (CLK_CTL_BASE + 0x4C8) |
| #define SDCC1_INACTIVITY_TIMER_CBCR (CLK_CTL_BASE + 0x4CC) |
| #define SDCC1_CMD_RCGR (CLK_CTL_BASE + 0x4D0) /* cmd */ |
| #define SDCC1_CFG_RCGR (CLK_CTL_BASE + 0x4D4) /* cfg */ |
| #define SDCC1_M (CLK_CTL_BASE + 0x4D8) /* m */ |
| #define SDCC1_N (CLK_CTL_BASE + 0x4DC) /* n */ |
| #define SDCC1_D (CLK_CTL_BASE + 0x4E0) /* d */ |
| |
| /* UART */ |
| #define BLSP1_AHB_CBCR (CLK_CTL_BASE + 0x5C4) |
| #define BLSP1_UART2_APPS_CBCR (CLK_CTL_BASE + 0x704) |
| #define BLSP1_UART2_APPS_CMD_RCGR (CLK_CTL_BASE + 0x70C) |
| #define BLSP1_UART2_APPS_CFG_RCGR (CLK_CTL_BASE + 0x710) |
| #define BLSP1_UART2_APPS_M (CLK_CTL_BASE + 0x714) |
| #define BLSP1_UART2_APPS_N (CLK_CTL_BASE + 0x718) |
| #define BLSP1_UART2_APPS_D (CLK_CTL_BASE + 0x71C) |
| |
| /* USB */ |
| #define USB_HS_SYSTEM_CBCR (CLK_CTL_BASE + 0x484) |
| #define USB_HS_AHB_CBCR (CLK_CTL_BASE + 0x488) |
| #define USB_HS_SYSTEM_CMD_RCGR (CLK_CTL_BASE + 0x490) |
| #define USB_HS_SYSTEM_CFG_RCGR (CLK_CTL_BASE + 0x494) |
| |
| #endif |