| /* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <arch/ops.h> |
| #include <sys/types.h> |
| #include <kernel/thread.h> |
| #include <debug.h> |
| #include <err.h> |
| #include <reg.h> |
| #include <string.h> |
| #include <malloc.h> |
| #include <stdlib.h> |
| #include <ufs_hw.h> |
| #include <utp.h> |
| #include <ufs.h> |
| #include <platform/iomap.h> |
| #include <platform/clock.h> |
| #include <platform/timer.h> |
| #include <arch/ops.h> |
| #include <endian.h> |
| #include <stdlib.h> |
| #include <sys/types.h> |
| |
| void utp_process_req_completion(struct ufs_req_irq_type *irq) |
| { |
| struct ufs_req_node *req; |
| struct list_node *prev; |
| uint32_t val; |
| |
| /* Make sure we have more nodes than just the head in the list. */ |
| if (list_next(irq->list, irq->list) == NULL) |
| { |
| dprintf(CRITICAL, "%s:%d UTRD/ UTMRD processed signalled and the wait queue is empty\n", __func__, __LINE__); |
| ASSERT(0); |
| } |
| |
| /* Read the door bell register. */ |
| val = readl(irq->door_bell_reg); |
| |
| list_for_every_entry(irq->list, req, struct ufs_req_node, list_node) |
| { |
| if (!(req->door_bell_bit & val)) |
| { |
| /* Transaction is complete: Either transaction completed in a normal way. |
| * Delete and Signal all requests that have completed. |
| */ |
| prev = req->list_node.prev; |
| /* TODO: move delete to the caller function. */ |
| list_delete(&(req->list_node)); |
| |
| if (event_signal(req->event, false)) |
| { |
| dprintf(CRITICAL, "%s:%d Event signal failed.\n",__func__, __LINE__); |
| ASSERT(0); |
| |
| } |
| req = containerof(prev, struct ufs_req_node, list_node); |
| } |
| } |
| |
| return; |
| } |
| |
| /* Always called within critical section: utrd_bitmap_mutex/ utmrd_bitmap_mutex. */ |
| static uint32_t utp_get_door_bell_bit(uint32_t reg, uint32_t *reg_bitmap, uint32_t *bit_num) |
| { |
| uint32_t val = 0; |
| uint32_t doorbell_bit_val; |
| uint32_t found = 0; |
| |
| *bit_num = 0; |
| |
| val = readl(reg) | *reg_bitmap; |
| doorbell_bit_val = 1; |
| |
| /* Find an empty slot. */ |
| do |
| { |
| (*bit_num)++; |
| |
| if (!(doorbell_bit_val & val)) |
| { |
| found = 1; |
| *reg_bitmap |= doorbell_bit_val; |
| break; |
| } |
| doorbell_bit_val <<= 1; |
| }while (doorbell_bit_val <= (uint32_t) (1 << 31)); |
| |
| if (!found) |
| { |
| doorbell_bit_val = 0; |
| dprintf(CRITICAL, "%s:%d Unable to find a free slot for transaction.\n",__func__, __LINE__); |
| } |
| |
| return doorbell_bit_val; |
| } |
| |
| static void utp_ring_door_bell(uint32_t reg, uint32_t doorbell_bit) |
| { |
| writel(doorbell_bit, reg); |
| } |
| |
| static int utp_utrd_process_timeout_req(struct ufs_dev *dev, |
| struct utp_utrd_req_build_type *utrd_req, |
| struct ufs_req_node *req) |
| { |
| switch (utrd_req->req_upiu->trans_type) |
| { |
| case UPIU_TYPE_NOP_OUT: |
| writel(~req->door_bell_bit, UFS_UTRLCLR(dev->base)); |
| return -UFS_RETRY; |
| default: |
| /* TODO : Add ufs hci sw reset.*/ |
| ASSERT(0); |
| return -UFS_FAILURE; |
| } |
| } |
| |
| static int utp_remove_from_bitmap(struct utp_bitmap_access_type *req) |
| { |
| |
| if (mutex_acquire(req->mutx)) |
| { |
| return -UFS_FAILURE; |
| } |
| |
| *(req->bitmap) &= ~req->door_bell_bit; |
| |
| if (mutex_release(req->mutx)) |
| { |
| return -UFS_FAILURE; |
| } |
| |
| return UFS_SUCCESS; |
| } |
| |
| static void utp_enqueue_utrd_fill_desc(struct utp_trans_req_desc *desc, struct utp_utrd_req_build_type *utrd_req) |
| { |
| /* Fill transfer desc. */ |
| memset(desc, 0, UPIU_HDR_LEN); |
| desc->cmd_type_dd_irq = UTP_REQ_BUILD_CMD_DD_IRQ_FIELD(utrd_req->cmd_type, utrd_req->dd, utrd_req->irq); |
| desc->overall_cmd_status = utrd_req->ocs; |
| /* Bits 0 - 6 are reserved in cmd_desc_base_addr[0] field. */ |
| desc->cmd_desc_base_addr[0] = ((uint32_t) utrd_req->req_upiu) & 0xC0; |
| desc->cmd_desc_base_addr[1] = ((uint32_t) utrd_req->req_upiu >> 8) & 0xFF; |
| desc->cmd_desc_base_addr[2] = ((uint32_t) utrd_req->req_upiu >> 16) & 0xFF; |
| desc->cmd_desc_base_addr[3] = ((uint32_t) utrd_req->req_upiu >> 24) & 0xFF; |
| desc->resp_upiu_offset = ROUNDUP(utrd_req->req_upiu_len, UPIU_HDR_LEN) / 4; |
| desc->resp_upiu_len = utrd_req->resp_upiu_len; |
| |
| if (utrd_req->dd != UTRD_NO_DATA_TRANSFER) |
| { |
| /* Data transfer command. |
| * Fill in PRDT data. |
| */ |
| desc->prdt_offset = utrd_req->prdt_offset / 4; |
| desc->prdt_len = utrd_req->prdt_len; |
| } |
| |
| /* Flush UTRD to memory. */ |
| cache_clean_invalidate_unaligned_start_addr((addr_t)desc, sizeof(struct utp_trans_req_desc)); |
| } |
| |
| static struct utp_trans_req_desc* utp_get_desc_slot_addr(struct ufs_dev *dev, struct utp_utrd_req_build_type *utrd_req, uint32_t *door_bell_val) |
| { |
| struct utp_trans_req_desc *desc = NULL; |
| uint32_t door_bell_slot; |
| |
| if (mutex_acquire(&(dev->utrd_data.bitmap_mutex))) |
| { |
| goto utp_get_desc_slot_addr_err; |
| } |
| |
| *door_bell_val = utp_get_door_bell_bit(UFS_UTRLDBR(dev->base), &dev->utrd_data.bitmap, &door_bell_slot); |
| if (!(*door_bell_val)) |
| { |
| goto utp_get_desc_slot_addr_err; |
| } |
| |
| if (mutex_release(&(dev->utrd_data.bitmap_mutex))) |
| { |
| goto utp_get_desc_slot_addr_err; |
| } |
| |
| desc = (struct utp_trans_req_desc *) ((addr_t)dev->utrd_data.list_base_addr + (door_bell_slot - 1) * sizeof(struct utp_trans_req_desc)); |
| |
| utp_get_desc_slot_addr_err: |
| return desc; |
| } |
| |
| int utp_poll_utrd_complete(struct ufs_dev *dev) |
| { |
| int ret; |
| struct ufs_req_irq_type irq; |
| uint32_t val, base, retry = 0; |
| base = dev->base; |
| val = readl(UFS_IS(base)); |
| irq.irq_handled = 0; |
| /* Wait till the desc has been processed. */ |
| while(((val & UFS_IS_UTRCS) == 0) && ((val & UFS_IS_UTMRCS) == 0)) |
| { |
| val = readl(UFS_IS(base)); |
| retry++; |
| udelay(1); |
| if(retry == UTP_MAX_COMMAND_RETRY) |
| { |
| dprintf(CRITICAL, "%s:%d UTP command never completed.\n", __func__, __LINE__); |
| return ERR_TIMED_OUT; |
| } |
| #ifdef DEBUG_UFS |
| dprintf(INFO, "Waiting for UTRCS/URMRCS Completion...\n"); |
| #endif |
| } |
| if (readl(UFS_IS(base)) & UFS_IS_UTRCS) |
| { |
| val = readl(UFS_IS(base)) & UFS_IS_UTRCS; |
| writel(UFS_IS_UTRCS, UFS_IS(base)); |
| irq.irq_handled = UFS_IS_UTRCS; |
| irq.list = &(dev->utrd_data.list_head.list_node); |
| irq.door_bell_reg = UFS_UTRLDBR(base); |
| utp_process_req_completion(&irq); |
| ret = INT_NO_RESCHEDULE; |
| } |
| else if (readl(UFS_IS(base)) & (UFS_IS_UTMRCS)) |
| { |
| val = readl(UFS_IS(base)) & UFS_IS_UTMRCS; |
| writel(UFS_IS_UTMRCS, UFS_IS(base)); |
| irq.irq_handled = UFS_IS_UTMRCS; |
| irq.list = &(dev->utmrd_data.list_head.list_node); |
| utp_process_req_completion(&irq); |
| ret = INT_NO_RESCHEDULE; |
| } |
| return ret; |
| } |
| |
| static int utp_enqueue_utrd(struct ufs_dev *dev, struct utp_utrd_req_build_type *utrd_req) |
| { |
| int ret; |
| struct utp_trans_req_desc *desc; |
| event_t utrd_evt; |
| struct ufs_req_node req; |
| uint32_t door_bell_bit_val; |
| struct utp_bitmap_access_type bitmap_req; |
| |
| ret = UFS_SUCCESS; |
| |
| event_init(&utrd_evt, false, EVENT_FLAG_AUTOUNSIGNAL); |
| |
| desc = utp_get_desc_slot_addr(dev, utrd_req, &door_bell_bit_val); |
| if (!desc) |
| { |
| ret = UFS_FAILURE; |
| goto utp_enqueue_utrd_err; |
| } |
| |
| /* Check register UTRLRSR and make sure it is read ‘1’ before continuing. */ |
| if (!readl(UFS_UTRLRSR(dev->base))) |
| { |
| ret = -UFS_FAILURE; |
| goto utp_enqueue_utrd_err; |
| } |
| |
| utp_enqueue_utrd_fill_desc(desc, utrd_req); |
| |
| req.door_bell_bit = door_bell_bit_val; |
| req.event = &utrd_evt; |
| |
| /* Enqueue the req in the device utrd list. */ |
| list_add_head(&(dev->utrd_data.list_head.list_node), &(req.list_node)); |
| |
| dsb(); |
| |
| #ifdef DEBUG_UFS |
| // print IS before write |
| ufs_dump_is_register(dev); |
| #endif |
| |
| utp_ring_door_bell(UFS_UTRLDBR(dev->base), door_bell_bit_val); |
| |
| dsb(); |
| |
| #ifdef DEBUG_UFS |
| // print IS after write |
| ufs_dump_is_register(dev); |
| #endif |
| ret = utp_poll_utrd_complete(dev); |
| |
| if (ret == ERR_TIMED_OUT) |
| { |
| /* Transaction not completed even after timeout ms. */ |
| dprintf(CRITICAL, "%s:%d Transaction timeout after polling %d times\n",__func__, __LINE__, UTP_MAX_COMMAND_RETRY); |
| ret = utp_utrd_process_timeout_req(dev, utrd_req, &req); |
| goto utp_enqueue_utrd_err; |
| } |
| else |
| { |
| /* Reset ret before returning. */ |
| ret = UFS_SUCCESS; |
| |
| /* Force read UTRD from memory. */ |
| dsb(); |
| cache_clean_invalidate_unaligned_start_addr((addr_t) desc, sizeof(struct ufs_req_node)); |
| |
| /* Check the response. */ |
| if (desc->overall_cmd_status != UTRD_OCS_SUCCESS) |
| { |
| dprintf(CRITICAL, "%s:%d Command failed. command type = %x\n", __func__, __LINE__, utrd_req->cmd_type); |
| ret = -UFS_FAILURE; |
| goto utp_enqueue_utrd_err; |
| } |
| } |
| |
| /* Signal slot as free. */ |
| bitmap_req.bitmap = &dev->utrd_data.bitmap; |
| bitmap_req.door_bell_bit = req.door_bell_bit; |
| bitmap_req.mutx = &(dev->utrd_data.bitmap_mutex); |
| |
| ret = utp_remove_from_bitmap(&bitmap_req); |
| if (ret) |
| goto utp_enqueue_utrd_err; |
| |
| utp_enqueue_utrd_err: |
| return ret; |
| } |
| |
| static int utp_get_prdt_len(uint32_t data_len, uint32_t *num_prdt) |
| { |
| /* Calculate the prdt entries required. */ |
| *num_prdt = ROUNDUP(data_len, UTP_MAX_PRD_DATA_BYTE_CNT); |
| *num_prdt >>= UTP_MAX_PRD_DATA_BYTE_CNT_BYTE_SHIFT; |
| |
| if (*num_prdt > UTP_MAX_PRD_TABLE_ENTRIES) |
| { |
| dprintf(CRITICAL, "%s:%d Data length exceeds for a single upiu transfer.\n", __func__,__LINE__); |
| return -UFS_FAILURE; |
| } |
| |
| return UFS_SUCCESS; |
| } |
| |
| static int utp_fill_req_upiu(struct ufs_dev *dev, struct upiu_req_build_type *upiu_data, struct upiu_gen_hdr *req_upiu) |
| { |
| memset(req_upiu, 0, UPIU_HDR_LEN); |
| |
| if (upiu_data->trans_type == UPIU_TYPE_QUERY_REQ) |
| { |
| /* Fill in query specific fields. */ |
| if (utp_build_query_req_upiu((struct upiu_trans_mgmt_query_hdr *) req_upiu, upiu_data)) |
| { |
| return -UFS_FAILURE; |
| } |
| } |
| |
| /* If a data transfer cmd, check the alignment and length of the buffer. */ |
| if (upiu_data->expected_data_len) |
| { |
| if (upiu_data->data_buffer_addr & 0x3) |
| { |
| dprintf(CRITICAL, "%s:%d Alignment and length check failed for data tranfer command.\n", __func__, __LINE__); |
| return -UFS_FAILURE; |
| } |
| } |
| |
| req_upiu->basic_hdr.trans_type = upiu_data->trans_type; |
| req_upiu->basic_hdr.flags = upiu_data->flags; |
| req_upiu->basic_hdr.cmd_set_type = upiu_data->cmd_set_type; |
| req_upiu->basic_hdr.data_seg_len = upiu_data->data_seg_len; |
| req_upiu->basic_hdr.lun = upiu_data->lun; |
| req_upiu->basic_hdr.total_ehs_len = upiu_data->ehs_len; |
| req_upiu->basic_hdr.task_tag = atomic_add((int *) &(dev->utrd_data.task_id), 1); |
| if (upiu_data->cdb) |
| memcpy(&(req_upiu->trans_specific_fields[4]), (void *) upiu_data->cdb, 16); |
| /* If command upiu, fill in data length. */ |
| if (req_upiu->basic_hdr.trans_type == UPIU_TYPE_COMMAND) |
| ((struct upiu_cmd_hdr *)req_upiu)->data_expected_len = BE32(upiu_data->expected_data_len); |
| |
| return UFS_SUCCESS; |
| |
| } |
| |
| static void utp_fill_utrd_properties(struct upiu_req_build_type *upiu_data, |
| struct utp_utrd_req_build_type *utrd, |
| struct utrd_cmd_desc *cmd_desc) |
| { |
| utrd->cmd_type = upiu_data->cmd_type; |
| utrd->dd = upiu_data->dd; |
| utrd->irq = UTRD_IRQ_CMD; |
| utrd->prdt_offset = UPIU_HDR_LEN + cmd_desc->resp_upiu_len; |
| utrd->prdt_len = cmd_desc->num_prdt; |
| utrd->req_upiu = (struct upiu_basic_hdr *) cmd_desc->req_upiu; |
| utrd->req_upiu_len = UPIU_HDR_LEN; |
| utrd->resp_upiu_len = cmd_desc->resp_upiu_len; |
| utrd->ocs = 0xF; |
| utrd->timeout = upiu_data->timeout_msecs; |
| } |
| |
| static void utp_fill_prdt_entries(struct upiu_req_build_type *upiu_data, struct utp_prdt_entry *prdt_entry) |
| { |
| uint64_t buf; |
| uint64_t bytes_remaining; |
| uint32_t prd_dbc; |
| |
| buf = upiu_data->data_buffer_addr; |
| bytes_remaining = upiu_data->expected_data_len; |
| |
| while (bytes_remaining) |
| { |
| prdt_entry->data_base_addr = buf; |
| prdt_entry->data_upper_addr = buf >> 32; |
| prd_dbc = MIN(UTP_MAX_PRD_DATA_BYTE_CNT, bytes_remaining) - 1; |
| prdt_entry->data_byte_cnt = prd_dbc; |
| if (bytes_remaining <= UTP_MAX_PRD_DATA_BYTE_CNT) |
| break; |
| buf += UTP_MAX_PRD_DATA_BYTE_CNT; |
| bytes_remaining -= UTP_MAX_PRD_DATA_BYTE_CNT; |
| prdt_entry++; |
| } |
| |
| } |
| |
| int utp_enqueue_upiu(struct ufs_dev *dev, struct upiu_req_build_type *upiu_data) |
| { |
| struct upiu_gen_hdr *req_upiu; |
| struct utp_utrd_req_build_type utrd; |
| uint32_t num_prdt; |
| struct utp_prdt_entry *prdt_entry; |
| int ret = UFS_SUCCESS; |
| uint32_t resp_len; |
| uint32_t cmd_desc_len; |
| struct utrd_cmd_desc cmd_desc; |
| |
| /* Round up resp_upiu_len to a DWORD boundary. |
| * Also, make sure it is of min required length. |
| */ |
| resp_len = ROUNDUP(upiu_data->resp_data_len, 4) + UPIU_HDR_LEN; |
| |
| if (utp_get_prdt_len(upiu_data->expected_data_len, &num_prdt)) |
| return -UFS_FAILURE; |
| |
| /* Calculate the length. */ |
| cmd_desc_len = UPIU_HDR_LEN + resp_len + num_prdt * sizeof(struct utp_prdt_entry); |
| |
| /* Allocate memory for UTP Command Descriptor. */ |
| req_upiu = (struct upiu_gen_hdr*) memalign((size_t ) lcm(CACHE_LINE, UTP_CMD_DESC_BASE_ALIGNMENT_SIZE), ROUNDUP(cmd_desc_len, CACHE_LINE)); |
| if (!req_upiu) |
| { |
| dprintf(CRITICAL, "%s:%d Unable to allocate request upiu\n",__func__, __LINE__); |
| return -UFS_FAILURE; |
| } |
| |
| /* Fill req upiu. */ |
| ret = utp_fill_req_upiu(dev, upiu_data, req_upiu); |
| if (ret) |
| { |
| goto utp_enqueue_upiu_err; |
| } |
| |
| /* Fill UTRD properties. */ |
| cmd_desc.num_prdt = num_prdt; |
| cmd_desc.req_upiu = req_upiu; |
| cmd_desc.resp_upiu_len = resp_len; |
| utp_fill_utrd_properties(upiu_data, &utrd, &cmd_desc); |
| |
| prdt_entry = (struct utp_prdt_entry *) ((uint32_t) req_upiu + UPIU_HDR_LEN + resp_len); |
| |
| /* Fill PRDT entries. */ |
| if (num_prdt) |
| utp_fill_prdt_entries(upiu_data, prdt_entry); |
| |
| /* Flush req_upiu */ |
| dsb(); |
| arch_clean_invalidate_cache_range((addr_t) req_upiu, cmd_desc_len); |
| |
| /* Check the response. */ |
| ret = utp_enqueue_utrd(dev, &utrd); |
| if (ret) |
| { |
| dprintf(CRITICAL, "%s:%d Command failed. command = %x\n", __func__, __LINE__, req_upiu->basic_hdr.trans_type); |
| goto utp_enqueue_upiu_err; |
| } |
| |
| /* UPIU processed. Invalidate cache to update resp. */ |
| arch_invalidate_cache_range((addr_t) req_upiu, cmd_desc_len); |
| |
| /* Save the response. */ |
| memcpy(upiu_data->resp_ptr, (void *) ((uint32_t)req_upiu + UPIU_HDR_LEN), upiu_data->resp_len); |
| memcpy((void *) upiu_data->resp_data_ptr, (void *) ((uint32_t)req_upiu + 2 * UPIU_HDR_LEN), upiu_data->resp_data_len); |
| |
| utp_enqueue_upiu_err: |
| free(req_upiu); |
| return ret; |
| } |