| /* |
| * Copyright (c) 2009, Google Inc. |
| * All rights reserved. |
| * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Google, Inc. nor the names of its contributors |
| * may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <reg.h> |
| #include <debug.h> |
| #include <dev/keys.h> |
| #include <dev/ssbi.h> |
| #include <lib/ptable.h> |
| #include <dev/flash.h> |
| #include <smem.h> |
| #include <mmc.h> |
| #include <platform/iomap.h> |
| #include <target/board.h> |
| #include <platform.h> |
| #include <crypto_hash.h> |
| |
| #define VARIABLE_LENGTH 0x10101010 |
| #define DIFF_START_ADDR 0xF0F0F0F0 |
| #define NUM_PAGES_PER_BLOCK 0x40 |
| #define RECOVERY_MODE 0x77665502 |
| #define FOTA_COOKIE 0x64645343 |
| |
| unsigned int fota_cookie[1]; |
| |
| static struct ptable flash_ptable; |
| unsigned hw_platform = 0; |
| unsigned target_msm_id = 0; |
| unsigned msm_version = 0; |
| |
| /* Setting this variable to different values defines the |
| * behavior of CE engine: |
| * platform_ce_type = CRYPTO_ENGINE_TYPE_NONE : No CE engine |
| * platform_ce_type = CRYPTO_ENGINE_TYPE_SW : Software CE engine |
| * platform_ce_type = CRYPTO_ENGINE_TYPE_HW : Hardware CE engine |
| * Behavior is determined in the target code. |
| */ |
| static crypto_engine_type platform_ce_type = CRYPTO_ENGINE_TYPE_SW; |
| |
| int machine_is_evb(); |
| |
| /* for these partitions, start will be offset by either what we get from |
| * smem, or from the above offset if smem is not useful. Also, we should |
| * probably have smem_ptable code populate our flash_ptable. |
| * |
| * When smem provides us with a full partition table, we can get rid of |
| * this altogether. |
| * |
| */ |
| static struct ptentry board_part_list_default[] = { |
| { |
| .start = 0, |
| .length = 10 /* In MB */ , |
| .name = "boot", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 253 /* In MB */ , |
| .name = "system", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 80 /* In MB */ , |
| .name = "cache", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 4 /* In MB */ , |
| .name = "misc", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = VARIABLE_LENGTH, |
| .name = "userdata", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 4 /* In MB */ , |
| .name = "persist", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 10 /* In MB */ , |
| .name = "recovery", |
| }, |
| }; |
| |
| /* |
| * SKU3 & SKU PVT devices use the same micron NAND device with different density, |
| * due to this SKU3 partition creation fails as the number of blocks calculated |
| * from flash density is wrong, To avoid this use a different partition table & |
| * move the variable length partition to the end, this way kernel will truncate |
| * the variable length partition & we need not add target checks in the shared |
| * nand driver code. |
| */ |
| |
| static struct ptentry board_part_list_sku3[] = { |
| { |
| .start = 0, |
| .length = 10 /* In MB */ , |
| .name = "boot", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 253 /* In MB */ , |
| .name = "system", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 80 /* In MB */ , |
| .name = "cache", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 4 /* In MB */ , |
| .name = "misc", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 4 /* In MB */ , |
| .name = "persist", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = 10 /* In MB */ , |
| .name = "recovery", |
| }, |
| { |
| .start = DIFF_START_ADDR, |
| .length = VARIABLE_LENGTH, |
| .name = "userdata", |
| }, |
| }; |
| |
| static int num_parts = sizeof(board_part_list_default) / sizeof(struct ptentry); |
| |
| void smem_ptable_init(void); |
| unsigned smem_get_apps_flash_start(void); |
| |
| void keypad_init(void); |
| |
| int target_is_emmc_boot(void); |
| |
| void target_init(void) |
| { |
| unsigned offset; |
| struct flash_info *flash_info; |
| struct ptentry *board_part_list; |
| unsigned total_num_of_blocks; |
| unsigned next_ptr_start_adr = 0; |
| unsigned blocks_per_1MB = 8; /* Default value of 2k page size on 256MB flash drive */ |
| int i; |
| |
| dprintf(INFO, "target_init()\n"); |
| |
| #if (!ENABLE_NANDWRITE) |
| keys_init(); |
| keypad_init(); |
| #endif |
| |
| /* Display splash screen if enabled */ |
| #if DISPLAY_SPLASH_SCREEN |
| display_init(); |
| dprintf(SPEW, "Diplay initialized\n"); |
| #endif |
| |
| if (target_is_emmc_boot()) { |
| /* Must wait for modem-up before we can intialize MMC. |
| */ |
| while (readl(MSM_SHARED_BASE + 0x14) != 1) ; |
| |
| if (mmc_boot_main(MMC_SLOT, MSM_SDC3_BASE)) { |
| dprintf(CRITICAL, "mmc init failed!"); |
| ASSERT(0); |
| } |
| return; |
| } |
| |
| ptable_init(&flash_ptable); |
| smem_ptable_init(); |
| |
| flash_init(); |
| flash_info = flash_get_info(); |
| ASSERT(flash_info); |
| |
| offset = smem_get_apps_flash_start(); |
| if (offset == 0xffffffff) |
| while (1) ; |
| |
| total_num_of_blocks = flash_info->num_blocks; |
| blocks_per_1MB = (1 << 20) / (flash_info->block_size); |
| |
| if (target_is_sku3()) |
| board_part_list = board_part_list_sku3; |
| else |
| board_part_list = board_part_list_default; |
| |
| for (i = 0; i < num_parts; i++) { |
| struct ptentry *ptn = &board_part_list[i]; |
| unsigned len = ((ptn->length) * blocks_per_1MB); |
| |
| if (ptn->start != 0) |
| ASSERT(ptn->start == DIFF_START_ADDR); |
| |
| ptn->start = next_ptr_start_adr; |
| |
| if (ptn->length == VARIABLE_LENGTH) { |
| unsigned length_for_prt = 0; |
| unsigned j; |
| for (j = i + 1; j < num_parts; j++) { |
| struct ptentry *temp_ptn = &board_part_list[j]; |
| ASSERT(temp_ptn->length != VARIABLE_LENGTH); |
| length_for_prt += |
| ((temp_ptn->length) * blocks_per_1MB); |
| } |
| len = |
| (total_num_of_blocks - 1) - (offset + ptn->start + |
| length_for_prt); |
| ASSERT(len >= 0); |
| } |
| next_ptr_start_adr = ptn->start + len; |
| ptable_add(&flash_ptable, ptn->name, offset + ptn->start, |
| len, ptn->flags, TYPE_APPS_PARTITION, |
| PERM_WRITEABLE); |
| } |
| |
| smem_add_modem_partitions(&flash_ptable); |
| |
| ptable_dump(&flash_ptable); |
| flash_set_ptable(&flash_ptable); |
| } |
| void board_info(void) |
| { |
| struct smem_board_info_v4 board_info_v4; |
| unsigned int board_info_len = 0; |
| unsigned smem_status; |
| unsigned format = 0; |
| unsigned id = 0; |
| |
| if (hw_platform && target_msm_id) |
| return; |
| |
| hw_platform = MSM7X27A_SURF; |
| target_msm_id = MSM7225A; |
| |
| smem_status = smem_read_alloc_entry_offset(SMEM_BOARD_INFO_LOCATION, |
| &format, sizeof(format), 0); |
| if (!smem_status) { |
| if (format == 4) { |
| board_info_len = sizeof(board_info_v4); |
| smem_status = |
| smem_read_alloc_entry(SMEM_BOARD_INFO_LOCATION, |
| &board_info_v4, |
| board_info_len); |
| if (!smem_status) { |
| id = board_info_v4.board_info_v3.hw_platform; |
| target_msm_id = |
| board_info_v4.board_info_v3.msm_id; |
| msm_version = |
| board_info_v4.board_info_v3.msm_version; |
| } |
| } |
| |
| /* Detect SURF v/s FFA v/s QRD */ |
| if (target_msm_id >= MSM8225 && target_msm_id <= MSM8625 |
| || (target_msm_id == MSM8125A) |
| || (target_msm_id == MSM8125)) { |
| switch (id) { |
| case 0x1: |
| hw_platform = MSM8X25_SURF; |
| break; |
| case 0x2: |
| hw_platform = MSM8X25_FFA; |
| break; |
| case 0x10: |
| hw_platform = MSM8X25_EVT; |
| break; |
| case 0x11: |
| hw_platform = MSM8X25Q_SKUD; |
| break; |
| case 0xC: |
| hw_platform = MSM8X25_EVB; |
| break; |
| case 0xF: |
| hw_platform = MSM8X25_QRD7; |
| break; |
| default: |
| hw_platform = MSM8X25_SURF; |
| } |
| } else { |
| switch (id) { |
| case 0x1: |
| /* Set the machine type based on msm ID */ |
| if (msm_is_7x25a(target_msm_id)) |
| hw_platform = MSM7X25A_SURF; |
| else |
| hw_platform = MSM7X27A_SURF; |
| break; |
| case 0x2: |
| if (msm_is_7x25a(target_msm_id)) |
| hw_platform = MSM7X25A_FFA; |
| else |
| hw_platform = MSM7X27A_FFA; |
| break; |
| case 0xB: |
| if(target_is_emmc_boot()) |
| hw_platform = MSM7X27A_QRD1; |
| else |
| hw_platform = MSM7X27A_QRD3; |
| break; |
| case 0xC: |
| hw_platform = MSM7X27A_EVB; |
| break; |
| case 0xF: |
| hw_platform = MSM7X27A_QRD3; |
| break; |
| default: |
| if (msm_is_7x25a(target_msm_id)) |
| hw_platform = MSM7X25A_SURF; |
| else |
| hw_platform = MSM7X27A_SURF; |
| }; |
| } |
| /* Set msm ID for target variants based on values read from smem */ |
| switch (target_msm_id) { |
| case MSM7225A: |
| case MSM7625A: |
| case ESM7225A: |
| case MSM7225AA: |
| case MSM7625AA: |
| case ESM7225AA: |
| case MSM7225AB: |
| case MSM7625AB: |
| case ESM7225AB: |
| case MSM7125A: |
| target_msm_id = MSM7625A; |
| break; |
| case MSM8225: |
| case MSM8625: |
| case MSM8125A: |
| case MSM8125: |
| target_msm_id = MSM8625; |
| break; |
| default: |
| target_msm_id = MSM7627A; |
| } |
| } |
| return; |
| } |
| |
| unsigned board_machtype(void) |
| { |
| board_info(); |
| return hw_platform; |
| } |
| |
| unsigned board_msm_id(void) |
| { |
| board_info(); |
| return target_msm_id; |
| } |
| |
| unsigned board_msm_version(void) |
| { |
| board_info(); |
| msm_version = (msm_version & 0xffff0000) >> 16; |
| return msm_version; |
| } |
| |
| crypto_engine_type board_ce_type(void) |
| { |
| return platform_ce_type; |
| } |
| |
| void reboot_device(unsigned reboot_reason) |
| { |
| reboot(reboot_reason); |
| } |
| |
| static int read_from_flash(struct ptentry* ptn, int offset, int size, void *dest) |
| { |
| void *buffer = NULL; |
| unsigned page_size = flash_page_size(); |
| unsigned page_mask = page_size - 1; |
| int read_size = (size + page_mask) & (~page_mask); |
| |
| buffer = malloc(read_size); |
| if(!buffer){ |
| dprintf(CRITICAL, "ERROR : Malloc failed for read_from_flash \n"); |
| return -1; |
| } |
| |
| if(flash_read(ptn, offset, buffer, read_size)){ |
| dprintf(CRITICAL, "ERROR : Flash read failed \n"); |
| return -1; |
| } |
| memcpy(dest, buffer, size); |
| free(buffer); |
| return 0; |
| } |
| |
| static unsigned int get_fota_cookie_mtd(void) |
| { |
| struct ptentry *ptn; |
| struct ptable *ptable; |
| unsigned int cookie = 0; |
| |
| ptable = flash_get_ptable(); |
| if (ptable == NULL) { |
| dprintf(CRITICAL, "ERROR: Partition table not found\n"); |
| return 0; |
| } |
| |
| ptn = ptable_find(ptable, "FOTA"); |
| if (ptn == NULL) { |
| dprintf(CRITICAL, "ERROR: No FOTA partition found\n"); |
| return 0; |
| } |
| |
| if (read_from_flash(ptn, 0, sizeof(unsigned int), &cookie) == -1) { |
| dprintf(CRITICAL, "ERROR: failed to read fota cookie from flash\n"); |
| return 0; |
| } |
| return cookie; |
| } |
| |
| static int read_from_mmc(struct ptentry* ptn, int size, void *dest) |
| { |
| void *buffer = NULL; |
| unsigned sector_mask = 511; |
| int read_size = (size + sector_mask) & (~sector_mask); |
| |
| buffer = malloc(read_size); |
| if(!buffer){ |
| dprintf(CRITICAL, "ERROR : Malloc failed for read_from_flash \n"); |
| return -1; |
| } |
| |
| if(mmc_read(ptn, buffer, read_size)) { |
| dprintf(CRITICAL, "ERROR : Flash read failed \n"); |
| return -1; |
| } |
| memcpy(dest, buffer, size); |
| free(buffer); |
| return 0; |
| } |
| |
| static int get_fota_cookie_mmc(void) |
| { |
| unsigned long long ptn = 0; |
| int index = -1; |
| unsigned int cookie = 0; |
| |
| index = partition_get_index("FOTA"); |
| ptn = partition_get_offset(index); |
| |
| if(ptn == 0) { |
| dprintf(CRITICAL,"ERROR: FOTA partition not found\n"); |
| return 0; |
| } |
| if(read_from_mmc(ptn, sizeof(unsigned int), &cookie)) { |
| dprintf(CRITICAL, "ERROR: Cannot read cookie info\n"); |
| return 0; |
| } |
| return cookie; |
| } |
| |
| unsigned check_reboot_mode(void) |
| { |
| unsigned mode[2] = { 0, 0 }; |
| unsigned int mode_len = sizeof(mode); |
| unsigned smem_status; |
| unsigned int cookie = 0; |
| |
| smem_status = smem_read_alloc_entry(SMEM_APPS_BOOT_MODE, |
| &mode, mode_len); |
| |
| /* |
| * SMEM value is relied upon on power shutdown. Check either of SMEM |
| * or FOTA update cookie is set |
| */ |
| if (target_is_emmc_boot()) |
| cookie = get_fota_cookie_mmc(); |
| else |
| cookie = get_fota_cookie_mtd(); |
| |
| if ((mode[0] == RECOVERY_MODE) || (cookie == FOTA_COOKIE)) |
| return RECOVERY_MODE; |
| |
| if (smem_status) { |
| dprintf(CRITICAL, |
| "ERROR: unable to read shared memory for reboot mode\n"); |
| return 0; |
| } |
| return mode[0]; |
| } |
| |
| static unsigned target_check_power_on_reason(void) |
| { |
| unsigned power_on_status = 0; |
| unsigned int status_len = sizeof(power_on_status); |
| unsigned smem_status; |
| |
| smem_status = smem_read_alloc_entry(SMEM_POWER_ON_STATUS_INFO, |
| &power_on_status, status_len); |
| if (smem_status) { |
| dprintf(CRITICAL, |
| "ERROR: unable to read shared memory for power on reason\n"); |
| } |
| |
| return power_on_status; |
| } |
| |
| unsigned target_pause_for_battery_charge(void) |
| { |
| if (target_check_power_on_reason() == PWR_ON_EVENT_WALL_CHG) |
| return 1; |
| return 0; |
| } |
| |
| void target_battery_charging_enable(unsigned enable, unsigned disconnect) |
| { |
| } |
| |
| #if _EMMC_BOOT |
| void target_serialno(unsigned char *buf) |
| { |
| unsigned int serialno; |
| serialno = mmc_get_psn(); |
| sprintf(buf, "%x", serialno); |
| } |
| |
| int emmc_recovery_init(void) |
| { |
| int rc; |
| rc = _emmc_recovery_init(); |
| return rc; |
| } |
| #endif |
| |
| int machine_is_evb() |
| { |
| int ret = 0; |
| unsigned mach_type = board_machtype(); |
| |
| switch(mach_type) { |
| case MSM7X27A_EVB: |
| case MSM8X25_EVB: |
| case MSM8X25_EVT: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| } |
| return ret; |
| } |
| int machine_is_qrd() |
| { |
| int ret = 0; |
| unsigned mach_type = board_machtype(); |
| |
| switch(mach_type) { |
| case MSM7X27A_QRD1: |
| case MSM7X27A_QRD3: |
| case MSM8X25_QRD7: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| } |
| return ret; |
| } |
| int machine_is_skud() |
| { |
| int ret = 0; |
| unsigned mach_type = board_machtype(); |
| |
| switch(mach_type) { |
| case MSM8X25Q_SKUD: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| } |
| return ret; |
| } |
| int machine_is_8x25() |
| { |
| int ret = 0; |
| unsigned mach_type = board_machtype(); |
| |
| switch(mach_type) { |
| case MSM8X25_SURF: |
| case MSM8X25_FFA: |
| case MSM8X25_EVB: |
| case MSM8X25_EVT: |
| case MSM8X25_QRD7: |
| case MSM8X25Q_SKUD: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| int msm_is_7x25a(int msm_id) |
| { |
| int ret = 0; |
| |
| switch (msm_id) { |
| case MSM7225A: |
| case MSM7625A: |
| case ESM7225A: |
| case MSM7225AA: |
| case MSM7625AA: |
| case ESM7225AA: |
| case MSM7225AB: |
| case MSM7625AB: |
| case ESM7225AB: |
| case MSM7125A: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| }; |
| return ret; |
| } |
| |
| static void target_ulpi_init(void) |
| { |
| unsigned int reg; |
| |
| ulpi_read(0x31); |
| dprintf(INFO, " Value of ulpi read 0x31 is %08x\n", reg); |
| /* todo : the write back value should be calculated according to |
| * reg &= 0xF3 but sometimes the value that is read initially |
| * doesnt look right |
| */ |
| ulpi_write(0x4A, 0x31); |
| reg = ulpi_read(0x31); |
| dprintf(INFO, " Value of ulpi read 0x31 after write is %08x\n", reg); |
| |
| reg = ulpi_read(0x32); |
| dprintf(INFO, " Value of ulpi read 0x32 is %08x\n", reg); |
| ulpi_write(0x30, 0x32); |
| reg = ulpi_read(0x32); |
| dprintf(INFO, " Value of ulpi read 0x32 after write is %08x\n", reg); |
| |
| reg = ulpi_read(0x36); |
| dprintf(INFO, " Value of ulpi read 0x36 is %08x\n", reg); |
| ulpi_write(reg | 0x2, 0x36); |
| reg = ulpi_read(0x36); |
| dprintf(INFO, " Value of ulpi read 0x36 after write is %08x\n", reg); |
| } |
| |
| void target_usb_init(void) |
| { |
| target_ulpi_init(); |
| } |
| |
| int target_cont_splash_screen() |
| { |
| int ret = 0; |
| unsigned mach_type = 0; |
| |
| mach_type = board_machtype(); |
| |
| switch(mach_type) { |
| case MSM8X25_EVB: |
| case MSM8X25_EVT: |
| case MSM8X25_QRD7: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| }; |
| return ret; |
| } |
| |
| int target_is_sku3() |
| { |
| int ret = 0; |
| unsigned mach_type = 0; |
| |
| mach_type = board_machtype(); |
| |
| switch(mach_type) { |
| case MSM7X27A_QRD3: |
| ret = 1; |
| break; |
| default: |
| ret = 0; |
| }; |
| return ret; |
| } |