| /* |
| * Copyright (c) 2008, Google Inc. |
| * All rights reserved. |
| * |
| * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <string.h> |
| #include <stdlib.h> |
| #include <debug.h> |
| #include <platform/iomap.h> |
| #include <platform/irqs.h> |
| #include <platform/interrupts.h> |
| #include <platform/timer.h> |
| #include <kernel/thread.h> |
| #include <reg.h> |
| |
| #include <dev/udc.h> |
| |
| #include "hsusb.h" |
| |
| /* common code - factor out into a shared file */ |
| |
| struct udc_descriptor { |
| struct udc_descriptor *next; |
| unsigned short tag; /* ((TYPE << 8) | NUM) */ |
| unsigned short len; /* total length */ |
| unsigned char data[0]; |
| }; |
| |
| struct udc_descriptor *udc_descriptor_alloc(unsigned type, unsigned num, unsigned len) |
| { |
| struct udc_descriptor *desc; |
| if ((len > 255) || (len < 2) || (num > 255) || (type > 255)) |
| return 0; |
| |
| if(!(desc = malloc(sizeof(struct udc_descriptor) + len))) |
| return 0; |
| |
| desc->next = 0; |
| desc->tag = (type << 8) | num; |
| desc->len = len; |
| desc->data[0] = len; |
| desc->data[1] = type; |
| |
| return desc; |
| } |
| |
| static struct udc_descriptor *desc_list = 0; |
| static unsigned next_string_id = 1; |
| |
| void udc_descriptor_register(struct udc_descriptor *desc) |
| { |
| desc->next = desc_list; |
| desc_list = desc; |
| } |
| |
| unsigned udc_string_desc_alloc(const char *str) |
| { |
| unsigned len; |
| struct udc_descriptor *desc; |
| unsigned char *data; |
| |
| if (next_string_id > 255) |
| return 0; |
| |
| if (!str) |
| return 0; |
| |
| len = strlen(str); |
| desc = udc_descriptor_alloc(TYPE_STRING, next_string_id, len * 2 + 2); |
| if (!desc) |
| return 0; |
| next_string_id++; |
| |
| /* expand ascii string to utf16 */ |
| data = desc->data + 2; |
| while (len-- > 0) { |
| *data++ = *str++; |
| *data++ = 0; |
| } |
| |
| udc_descriptor_register(desc); |
| return desc->tag & 0xff; |
| } |
| |
| /* end of common code */ |
| |
| __WEAK void hsusb_clock_init(void) |
| { |
| return; |
| } |
| |
| #if 1 |
| #define DBG(x...) do {} while(0) |
| #else |
| #define DBG(x...) dprintf(INFO, x) |
| #endif |
| |
| #define usb_status(a,b) |
| |
| struct usb_request { |
| struct udc_request req; |
| struct ept_queue_item *item; |
| }; |
| |
| struct udc_endpoint |
| { |
| struct udc_endpoint *next; |
| unsigned bit; |
| struct ept_queue_head *head; |
| struct usb_request *req; |
| unsigned char num; |
| unsigned char in; |
| unsigned short maxpkt; |
| }; |
| |
| struct udc_endpoint *ept_list = 0; |
| struct ept_queue_head *epts = 0; |
| |
| static int usb_online = 0; |
| static int usb_highspeed = 0; |
| |
| static struct udc_device *the_device; |
| static struct udc_gadget *the_gadget; |
| |
| struct udc_endpoint *_udc_endpoint_alloc(unsigned num, unsigned in, unsigned max_pkt) |
| { |
| struct udc_endpoint *ept; |
| unsigned cfg; |
| |
| ept = malloc(sizeof(*ept)); |
| |
| ept->maxpkt = max_pkt; |
| ept->num = num; |
| ept->in = !!in; |
| ept->req = 0; |
| |
| cfg = CONFIG_MAX_PKT(max_pkt) | CONFIG_ZLT; |
| |
| if(ept->in) { |
| ept->bit = EPT_TX(ept->num); |
| } else { |
| ept->bit = EPT_RX(ept->num); |
| if(num == 0) |
| cfg |= CONFIG_IOS; |
| } |
| |
| ept->head = epts + (num * 2) + (ept->in); |
| ept->head->config = cfg; |
| |
| ept->next = ept_list; |
| ept_list = ept; |
| |
| DBG("ept%d %s @%p/%p max=%d bit=%x\n", |
| num, in ? "in":"out", ept, ept->head, max_pkt, ept->bit); |
| |
| return ept; |
| } |
| |
| static unsigned ept_alloc_table = EPT_TX(0) | EPT_RX(0); |
| |
| struct udc_endpoint *udc_endpoint_alloc(unsigned type, unsigned maxpkt) |
| { |
| struct udc_endpoint *ept; |
| unsigned n; |
| unsigned in; |
| |
| if (type == UDC_TYPE_BULK_IN) { |
| in = 1; |
| } else if (type == UDC_TYPE_BULK_OUT) { |
| in = 0; |
| } else { |
| return 0; |
| } |
| |
| for (n = 1; n < 16; n++) { |
| unsigned bit = in ? EPT_TX(n) : EPT_RX(n); |
| if (ept_alloc_table & bit) |
| continue; |
| ept = _udc_endpoint_alloc(n, in, maxpkt); |
| if (ept) |
| ept_alloc_table |= bit; |
| return ept; |
| } |
| return 0; |
| } |
| |
| void udc_endpoint_free(struct udc_endpoint *ept) |
| { |
| /* todo */ |
| } |
| |
| static void endpoint_enable(struct udc_endpoint *ept, unsigned yes) |
| { |
| unsigned n = readl(USB_ENDPTCTRL(ept->num)); |
| |
| if(yes) { |
| if(ept->in) { |
| n |= (CTRL_TXE | CTRL_TXR | CTRL_TXT_BULK); |
| } else { |
| n |= (CTRL_RXE | CTRL_RXR | CTRL_RXT_BULK); |
| } |
| |
| if(ept->num != 0) { |
| /* XXX should be more dynamic... */ |
| if(usb_highspeed) { |
| ept->head->config = CONFIG_MAX_PKT(512) | CONFIG_ZLT; |
| } else { |
| ept->head->config = CONFIG_MAX_PKT(64) | CONFIG_ZLT; |
| } |
| } |
| } |
| writel(n, USB_ENDPTCTRL(ept->num)); |
| } |
| |
| struct udc_request *udc_request_alloc(void) |
| { |
| struct usb_request *req; |
| req = malloc(sizeof(*req)); |
| req->req.buf = 0; |
| req->req.length = 0; |
| req->item = memalign(32, 32); |
| return &req->req; |
| } |
| |
| void udc_request_free(struct udc_request *req) |
| { |
| free(req); |
| } |
| |
| int udc_request_queue(struct udc_endpoint *ept, struct udc_request *_req) |
| { |
| struct usb_request *req = (struct usb_request *) _req; |
| struct ept_queue_item *item = req->item; |
| unsigned phys = (unsigned) req->req.buf; |
| |
| item->next = TERMINATE; |
| item->info = INFO_BYTES(req->req.length) | INFO_IOC | INFO_ACTIVE; |
| item->page0 = phys; |
| item->page1 = (phys & 0xfffff000) + 0x1000; |
| |
| enter_critical_section(); |
| ept->head->next = (unsigned) item; |
| ept->head->info = 0; |
| ept->req = req; |
| |
| arch_clean_invalidate_cache_range((addr_t) ept, sizeof(struct udc_endpoint)); |
| arch_clean_invalidate_cache_range((addr_t) ept->head, sizeof(struct ept_queue_head)); |
| arch_clean_invalidate_cache_range((addr_t) ept->req, sizeof(struct usb_request)); |
| arch_clean_invalidate_cache_range((addr_t) req->req.buf, req->req.length); |
| arch_clean_invalidate_cache_range((addr_t) ept->req->item, sizeof(struct ept_queue_item)); |
| |
| DBG("ept%d %s queue req=%p\n", |
| ept->num, ept->in ? "in" : "out", req); |
| |
| writel(ept->bit, USB_ENDPTPRIME); |
| exit_critical_section(); |
| return 0; |
| } |
| |
| static void handle_ept_complete(struct udc_endpoint *ept) |
| { |
| struct ept_queue_item *item; |
| unsigned actual; |
| int status; |
| struct usb_request *req; |
| |
| DBG("ept%d %s complete req=%p\n", |
| ept->num, ept->in ? "in" : "out", ept->req); |
| |
| arch_clean_invalidate_cache_range((addr_t) ept, sizeof(struct udc_endpoint)); |
| arch_clean_invalidate_cache_range((addr_t) ept->req, sizeof(struct usb_request)); |
| |
| req = ept->req; |
| if(req) { |
| ept->req = 0; |
| |
| item = req->item; |
| |
| /* For some reason we are getting the notification for |
| * transfer completion before the active bit has cleared. |
| * HACK: wait for the ACTIVE bit to clear: |
| */ |
| do |
| { |
| /* Must clean/invalidate cached item data before checking |
| * the status every time. |
| */ |
| arch_clean_invalidate_cache_range((addr_t) item, sizeof(struct ept_queue_item)); |
| } while (readl(&(item->info)) & INFO_ACTIVE); |
| |
| arch_clean_invalidate_cache_range((addr_t) req->req.buf, req->req.length); |
| |
| if(item->info & 0xff) { |
| actual = 0; |
| status = -1; |
| dprintf(INFO, "EP%d/%s FAIL nfo=%x pg0=%x\n", |
| ept->num, ept->in ? "in" : "out", item->info, item->page0); |
| } else { |
| actual = req->req.length - ((item->info >> 16) & 0x7fff); |
| status = 0; |
| } |
| if(req->req.complete) |
| req->req.complete(&req->req, actual, status); |
| } |
| } |
| |
| static const char *reqname(unsigned r) |
| { |
| switch(r) { |
| case GET_STATUS: return "GET_STATUS"; |
| case CLEAR_FEATURE: return "CLEAR_FEATURE"; |
| case SET_FEATURE: return "SET_FEATURE"; |
| case SET_ADDRESS: return "SET_ADDRESS"; |
| case GET_DESCRIPTOR: return "GET_DESCRIPTOR"; |
| case SET_DESCRIPTOR: return "SET_DESCRIPTOR"; |
| case GET_CONFIGURATION: return "GET_CONFIGURATION"; |
| case SET_CONFIGURATION: return "SET_CONFIGURATION"; |
| case GET_INTERFACE: return "GET_INTERFACE"; |
| case SET_INTERFACE: return "SET_INTERFACE"; |
| default: return "*UNKNOWN*"; |
| } |
| } |
| |
| static struct udc_endpoint *ep0in, *ep0out; |
| static struct udc_request *ep0req; |
| |
| static void setup_ack(void) |
| { |
| ep0req->complete = 0; |
| ep0req->length = 0; |
| udc_request_queue(ep0in, ep0req); |
| } |
| |
| static void ep0in_complete(struct udc_request *req, unsigned actual, int status) |
| { |
| DBG("ep0in_complete %p %d %d\n", req, actual, status); |
| if(status == 0) { |
| req->length = 0; |
| req->complete = 0; |
| udc_request_queue(ep0out, req); |
| } |
| } |
| |
| static void setup_tx(void *buf, unsigned len) |
| { |
| DBG("setup_tx %p %d\n", buf, len); |
| memcpy(ep0req->buf, buf, len); |
| ep0req->complete = ep0in_complete; |
| ep0req->length = len; |
| udc_request_queue(ep0in, ep0req); |
| } |
| |
| static unsigned char usb_config_value = 0; |
| |
| #define SETUP(type,request) (((type) << 8) | (request)) |
| |
| static void set_test_mode(uint16_t value) |
| { |
| uint32_t mode; |
| if(value == TEST_PACKET) |
| { |
| dprintf(ALWAYS,"Entering test mode for TST_PKT\n"); |
| mode = readl(USB_PORTSC) & (~PORTSC_PTC); |
| writel(mode | PORTSC_PTC_TST_PKT, USB_PORTSC); |
| } |
| } |
| |
| static void handle_setup(struct udc_endpoint *ept) |
| { |
| struct setup_packet s; |
| |
| arch_clean_invalidate_cache_range((addr_t) ept->head->setup_data, sizeof(struct ept_queue_head)); |
| memcpy(&s, ept->head->setup_data, sizeof(s)); |
| writel(ept->bit, USB_ENDPTSETUPSTAT); |
| |
| DBG("handle_setup type=0x%02x req=0x%02x val=%d idx=%d len=%d (%s)\n", |
| s.type, s.request, s.value, s.index, s.length, |
| reqname(s.request)); |
| |
| switch (SETUP(s.type,s.request)) { |
| case SETUP(DEVICE_READ, GET_STATUS): { |
| unsigned zero = 0; |
| if (s.length == 2) { |
| setup_tx(&zero, 2); |
| return; |
| } |
| break; |
| } |
| case SETUP(DEVICE_READ, GET_DESCRIPTOR): { |
| struct udc_descriptor *desc; |
| /* usb_highspeed? */ |
| for (desc = desc_list; desc; desc = desc->next) { |
| if (desc->tag == s.value) { |
| unsigned len = desc->len; |
| if (len > s.length) len = s.length; |
| setup_tx(desc->data, len); |
| return; |
| } |
| } |
| break; |
| } |
| case SETUP(DEVICE_READ, GET_CONFIGURATION): |
| /* disabling this causes data transaction failures on OSX. Why? */ |
| if ((s.value == 0) && (s.index == 0) && (s.length == 1)) { |
| setup_tx(&usb_config_value, 1); |
| return; |
| } |
| break; |
| case SETUP(DEVICE_WRITE, SET_CONFIGURATION): |
| if (s.value == 1) { |
| struct udc_endpoint *ept; |
| /* enable endpoints */ |
| for (ept = ept_list; ept; ept = ept->next){ |
| if (ept->num == 0) |
| continue; |
| endpoint_enable(ept, s.value); |
| } |
| usb_config_value = 1; |
| the_gadget->notify(the_gadget, UDC_EVENT_ONLINE); |
| } else { |
| writel(0, USB_ENDPTCTRL(1)); |
| usb_config_value = 0; |
| the_gadget->notify(the_gadget, UDC_EVENT_OFFLINE); |
| } |
| setup_ack(); |
| usb_online = s.value ? 1 : 0; |
| usb_status(s.value ? 1 : 0, usb_highspeed); |
| return; |
| case SETUP(DEVICE_WRITE, SET_ADDRESS): |
| /* write address delayed (will take effect |
| ** after the next IN txn) |
| */ |
| writel((s.value << 25) | (1 << 24), USB_DEVICEADDR); |
| setup_ack(); |
| return; |
| case SETUP(INTERFACE_WRITE, SET_INTERFACE): |
| /* if we ack this everything hangs */ |
| /* per spec, STALL is valid if there is not alt func */ |
| goto stall; |
| case SETUP(DEVICE_WRITE, SET_FEATURE): |
| setup_ack(); |
| /* TODO: Use s.value and fix byte ordering */ |
| set_test_mode(s.index); |
| return; |
| case SETUP(ENDPOINT_WRITE, CLEAR_FEATURE): { |
| struct udc_endpoint *ept; |
| unsigned num = s.index & 15; |
| unsigned in = !!(s.index & 0x80); |
| |
| if ((s.value == 0) && (s.length == 0)) { |
| DBG("clr feat %d %d\n", num, in); |
| for (ept = ept_list; ept; ept = ept->next) { |
| if ((ept->num == num) && (ept->in == in)) { |
| endpoint_enable(ept, 1); |
| setup_ack(); |
| return; |
| } |
| } |
| } |
| break; |
| } |
| } |
| |
| dprintf(INFO, "STALL %s %d %d %d %d %d\n", |
| reqname(s.request), |
| s.type, s.request, s.value, s.index, s.length); |
| |
| stall: |
| writel((1<<16) | (1 << 0), USB_ENDPTCTRL(ept->num)); |
| } |
| |
| unsigned ulpi_read(unsigned reg) |
| { |
| /* initiate read operation */ |
| writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), |
| USB_ULPI_VIEWPORT); |
| |
| /* wait for completion */ |
| while(readl(USB_ULPI_VIEWPORT) & ULPI_RUN) ; |
| |
| return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT)); |
| } |
| |
| void ulpi_write(unsigned val, unsigned reg) |
| { |
| /* initiate write operation */ |
| writel(ULPI_RUN | ULPI_WRITE | |
| ULPI_ADDR(reg) | ULPI_DATA(val), |
| USB_ULPI_VIEWPORT); |
| |
| /* wait for completion */ |
| while(readl(USB_ULPI_VIEWPORT) & ULPI_RUN) ; |
| } |
| |
| #define USB_CLK 0x00902910 |
| #define USB_PHY_CLK 0x00902E20 |
| #define CLK_RESET_ASSERT 0x1 |
| #define CLK_RESET_DEASSERT 0x0 |
| #define CLK_RESET(x,y) writel((y), (x)); |
| |
| static int msm_otg_xceiv_reset() |
| { |
| CLK_RESET(USB_CLK, CLK_RESET_ASSERT); |
| CLK_RESET(USB_PHY_CLK, CLK_RESET_ASSERT); |
| mdelay(20); |
| CLK_RESET(USB_PHY_CLK, CLK_RESET_DEASSERT); |
| CLK_RESET(USB_CLK, CLK_RESET_DEASSERT); |
| mdelay(20); |
| |
| /* select ULPI phy */ |
| writel(0x81000000, USB_PORTSC); |
| return 0; |
| } |
| |
| void board_usb_init(void); |
| void board_ulpi_init(void); |
| |
| int udc_init(struct udc_device *dev) |
| { |
| DBG("udc_init():\n"); |
| |
| hsusb_clock_init(); |
| |
| #ifdef PLATFORM_MSM8X60 |
| /* Configure GPIOs for HS_USB */ |
| hsusb_gpio_init(); |
| #endif |
| |
| epts = memalign(4096, 4096); |
| |
| dprintf(INFO, "USB init ept @ %p\n", epts); |
| memset(epts, 0, 32 * sizeof(struct ept_queue_head)); |
| arch_clean_invalidate_cache_range((addr_t) epts, 32 * sizeof(struct ept_queue_head)); |
| |
| //dprintf(INFO, "USB ID %08x\n", readl(USB_ID)); |
| // board_usb_init(); |
| |
| /* select ULPI phy */ |
| #ifdef PLATFORM_MSM8X60 |
| msm_otg_xceiv_reset(); |
| #else |
| writel(0x81000000, USB_PORTSC); |
| #endif |
| /* RESET */ |
| writel(0x00080002, USB_USBCMD); |
| |
| thread_sleep(20); |
| |
| // board_ulpi_init(); |
| |
| writel((unsigned) epts, USB_ENDPOINTLISTADDR); |
| |
| /* select DEVICE mode */ |
| writel(0x02, USB_USBMODE); |
| |
| writel(0xffffffff, USB_ENDPTFLUSH); |
| thread_sleep(20); |
| |
| ep0out = _udc_endpoint_alloc(0, 0, 64); |
| ep0in = _udc_endpoint_alloc(0, 1, 64); |
| ep0req = udc_request_alloc(); |
| ep0req->buf = malloc(4096); |
| |
| { |
| /* create and register a language table descriptor */ |
| /* language 0x0409 is US English */ |
| struct udc_descriptor *desc = udc_descriptor_alloc(TYPE_STRING, 0, 4); |
| desc->data[2] = 0x09; |
| desc->data[3] = 0x04; |
| udc_descriptor_register(desc); |
| } |
| |
| the_device = dev; |
| return 0; |
| } |
| |
| enum handler_return udc_interrupt(void *arg) |
| { |
| struct udc_endpoint *ept; |
| unsigned ret = INT_NO_RESCHEDULE; |
| unsigned n = readl(USB_USBSTS); |
| writel(n, USB_USBSTS); |
| |
| n &= (STS_SLI | STS_URI | STS_PCI | STS_UI | STS_UEI); |
| |
| DBG("\nudc_interrupt():\n"); |
| |
| if (n == 0) { |
| DBG("n = 0\n"); |
| return ret; |
| } |
| |
| if (n & STS_URI) { |
| DBG("STS_URI\n"); |
| |
| writel(readl(USB_ENDPTCOMPLETE), USB_ENDPTCOMPLETE); |
| writel(readl(USB_ENDPTSETUPSTAT), USB_ENDPTSETUPSTAT); |
| writel(0xffffffff, USB_ENDPTFLUSH); |
| writel(0, USB_ENDPTCTRL(1)); |
| dprintf(INFO, "-- reset --\n"); |
| usb_online = 0; |
| usb_config_value = 0; |
| the_gadget->notify(the_gadget, UDC_EVENT_OFFLINE); |
| |
| /* error out any pending reqs */ |
| for (ept = ept_list; ept; ept = ept->next) { |
| /* ensure that ept_complete considers |
| * this to be an error state |
| */ |
| if (ept->req) { |
| ept->req->item->info = INFO_HALTED; |
| handle_ept_complete(ept); |
| } |
| } |
| usb_status(0, usb_highspeed); |
| } |
| if (n & STS_SLI) { |
| DBG("-- suspend --\n"); |
| } |
| if (n & STS_PCI) { |
| dprintf(INFO, "-- portchange --\n"); |
| unsigned spd = (readl(USB_PORTSC) >> 26) & 3; |
| if(spd == 2) { |
| usb_highspeed = 1; |
| } else { |
| usb_highspeed = 0; |
| } |
| } |
| if (n & STS_UEI) { |
| DBG("STS_UEI\n"); |
| dprintf(INFO, "<UEI %x>\n", readl(USB_ENDPTCOMPLETE)); |
| } |
| #if 0 |
| DBG("STS: "); |
| if (n & STS_UEI) DBG("ERROR "); |
| if (n & STS_SLI) DBG("SUSPEND "); |
| if (n & STS_URI) DBG("RESET "); |
| if (n & STS_PCI) DBG("PORTCHANGE "); |
| if (n & STS_UI) DBG("USB "); |
| DBG("\n"); |
| #endif |
| if ((n & STS_UI) || (n & STS_UEI)) { |
| DBG("STS_UI and UEI \n"); |
| n = readl(USB_ENDPTSETUPSTAT); |
| if (n & EPT_RX(0)) { |
| handle_setup(ep0out); |
| ret = INT_RESCHEDULE; |
| } |
| |
| n = readl(USB_ENDPTCOMPLETE); |
| if (n != 0) { |
| writel(n, USB_ENDPTCOMPLETE); |
| } |
| |
| for (ept = ept_list; ept; ept = ept->next){ |
| if (n & ept->bit) { |
| handle_ept_complete(ept); |
| ret = INT_RESCHEDULE; |
| } |
| } |
| } |
| return ret; |
| } |
| |
| int udc_register_gadget(struct udc_gadget *gadget) |
| { |
| if (the_gadget) { |
| dprintf(CRITICAL, "only one gadget supported\n"); |
| return -1; |
| } |
| the_gadget = gadget; |
| return 0; |
| } |
| |
| static void udc_ept_desc_fill(struct udc_endpoint *ept, unsigned char *data) |
| { |
| data[0] = 7; |
| data[1] = TYPE_ENDPOINT; |
| data[2] = ept->num | (ept->in ? 0x80 : 0x00); |
| data[3] = 0x02; /* bulk -- the only kind we support */ |
| data[4] = ept->maxpkt; |
| data[5] = ept->maxpkt >> 8; |
| data[6] = ept->in ? 0x00 : 0x01; |
| } |
| |
| static unsigned udc_ifc_desc_size(struct udc_gadget *g) |
| { |
| return 9 + g->ifc_endpoints * 7; |
| } |
| |
| static void udc_ifc_desc_fill(struct udc_gadget *g, unsigned char *data) |
| { |
| unsigned n; |
| |
| data[0] = 0x09; |
| data[1] = TYPE_INTERFACE; |
| data[2] = 0x00; /* ifc number */ |
| data[3] = 0x00; /* alt number */ |
| data[4] = g->ifc_endpoints; |
| data[5] = g->ifc_class; |
| data[6] = g->ifc_subclass; |
| data[7] = g->ifc_protocol; |
| data[8] = udc_string_desc_alloc(g->ifc_string); |
| |
| data += 9; |
| for (n = 0; n < g->ifc_endpoints; n++) { |
| udc_ept_desc_fill(g->ept[n], data); |
| data += 7; |
| } |
| } |
| |
| int udc_start(void) |
| { |
| struct udc_descriptor *desc; |
| unsigned char *data; |
| unsigned size; |
| |
| dprintf(ALWAYS, "udc_start()\n"); |
| |
| if (!the_device) { |
| dprintf(CRITICAL, "udc cannot start before init\n"); |
| return -1; |
| } |
| if (!the_gadget) { |
| dprintf(CRITICAL, "udc has no gadget registered\n"); |
| return -1; |
| } |
| |
| /* create our device descriptor */ |
| desc = udc_descriptor_alloc(TYPE_DEVICE, 0, 18); |
| data = desc->data; |
| data[2] = 0x00; /* usb spec minor rev */ |
| data[3] = 0x02; /* usb spec major rev */ |
| data[4] = 0x00; /* class */ |
| data[5] = 0x00; /* subclass */ |
| data[6] = 0x00; /* protocol */ |
| data[7] = 0x40; /* max packet size on ept 0 */ |
| memcpy(data + 8, &the_device->vendor_id, sizeof(short)); |
| memcpy(data + 10, &the_device->product_id, sizeof(short)); |
| memcpy(data + 12, &the_device->version_id, sizeof(short)); |
| data[14] = udc_string_desc_alloc(the_device->manufacturer); |
| data[15] = udc_string_desc_alloc(the_device->product); |
| data[16] = udc_string_desc_alloc(the_device->serialno); |
| data[17] = 1; /* number of configurations */ |
| udc_descriptor_register(desc); |
| |
| /* create our configuration descriptor */ |
| size = 9 + udc_ifc_desc_size(the_gadget); |
| desc = udc_descriptor_alloc(TYPE_CONFIGURATION, 0, size); |
| data = desc->data; |
| data[0] = 0x09; |
| data[2] = size; |
| data[3] = size >> 8; |
| data[4] = 0x01; /* number of interfaces */ |
| data[5] = 0x01; /* configuration value */ |
| data[6] = 0x00; /* configuration string */ |
| data[7] = 0x80; /* attributes */ |
| data[8] = 0x80; /* max power (250ma) -- todo fix this */ |
| udc_ifc_desc_fill(the_gadget, data + 9); |
| udc_descriptor_register(desc); |
| |
| register_int_handler(INT_USB_HS, udc_interrupt, (void*) 0); |
| writel(STS_URI | STS_SLI | STS_UI | STS_PCI, USB_USBINTR); |
| unmask_interrupt(INT_USB_HS); |
| |
| /* go to RUN mode (D+ pullup enable) */ |
| writel(0x00080001, USB_USBCMD); |
| |
| return 0; |
| } |
| |
| int udc_stop(void) |
| { |
| #ifdef PLATFORM_MSM8X60 |
| int val; |
| #endif |
| writel(0, USB_USBINTR); |
| mask_interrupt(INT_USB_HS); |
| |
| /* disable pullup */ |
| writel(0x00080000, USB_USBCMD); |
| #ifdef PLATFORM_MSM8X60 |
| /* Voting down PLL8 */ |
| val = readl(0x009034C0); |
| val &= ~(1<<8); |
| writel(val, 0x009034C0); |
| #endif |
| thread_sleep(10); |
| |
| return 0; |
| } |
| |