blob: 42283e1c0734c1bece7e36773f9d16a6847aa9b7 [file] [log] [blame]
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <bits.h>
#include <reg.h>
#include <pm8x41_hw.h>
#include <pm8x41_wled.h>
static uint8_t wled_slave_id;
static void wled_reg_write(uint32_t addr, uint8_t val)
{
uint32_t new_addr;
if (wled_slave_id) {
new_addr = addr + (wled_slave_id << 16);
REG_WRITE(new_addr, val);
} else {
new_addr = addr + (DEFAULT_SLAVE_ID << 16);
REG_WRITE(new_addr, val);
}
}
void pm8x41_wled_config_slave_id(uint8_t slave_id)
{
wled_slave_id = slave_id;
}
void pm8x41_wled_config(struct pm8x41_wled_data *wled_ctrl) {
if (!wled_ctrl) {
dprintf(CRITICAL, "Error: Invalid WLED data.\n");
return;
}
wled_reg_write(PM_WLED_MODULATION_SCHEME, wled_ctrl->mod_scheme);
wled_reg_write(PM_WLED_LED1_BRIGHTNESS_LSB, (wled_ctrl->led1_brightness & 0xFF));
wled_reg_write(PM_WLED_LED1_BRIGHTNESS_MSB, ((wled_ctrl->led1_brightness >> 8) & 0xFF));
wled_reg_write(PM_WLED_LED2_BRIGHTNESS_LSB, (wled_ctrl->led2_brightness & 0xFF));
wled_reg_write(PM_WLED_LED2_BRIGHTNESS_MSB, ((wled_ctrl->led2_brightness >> 8) & 0xFF));
wled_reg_write(PM_WLED_LED3_BRIGHTNESS_LSB, (wled_ctrl->led3_brightness & 0xFF));
wled_reg_write(PM_WLED_LED3_BRIGHTNESS_MSB, ((wled_ctrl->led3_brightness >> 8) & 0xFF));
wled_reg_write(PM_WLED_MAX_DUTY_CYCLE, wled_ctrl->max_duty_cycle);
wled_reg_write(PM_WLED_OVP, wled_ctrl->ovp);
wled_reg_write(LEDn_FULL_SCALE_CURRENT(1), wled_ctrl->full_current_scale);
wled_reg_write(LEDn_FULL_SCALE_CURRENT(2), wled_ctrl->full_current_scale);
wled_reg_write(LEDn_FULL_SCALE_CURRENT(3), wled_ctrl->full_current_scale);
wled_reg_write(PM_WLED_FDBCK_CONTROL, wled_ctrl->fdbck);
dprintf(SPEW, "WLED Configuration Success.\n");
}
void pm8x41_wled_sink_control(uint8_t enable) {
uint8_t value = 0x0;
if (enable) {
value = PM_WLED_LED1_SINK_MASK |
PM_WLED_LED2_SINK_MASK |
PM_WLED_LED3_SINK_MASK;
}
wled_reg_write(PM_WLED_CURRENT_SINK, value);
dprintf(SPEW, "WLED Sink Success\n");
}
void pm8x41_wled_iled_sync_control(uint8_t enable) {
uint8_t value = 0x0;
if (enable) {
value = PM_WLED_LED1_ILED_SYNC_MASK |
PM_WLED_LED2_ILED_SYNC_MASK |
PM_WLED_LED3_ILED_SYNC_MASK;
}
wled_reg_write(PM_WLED_ILED_SYNC_BIT, value);
dprintf(SPEW, "WLED ILED Sync Success\n");
}
void pm8x41_wled_led_mod_enable(uint8_t enable) {
uint8_t value = 0x0;
if (enable)
value = PM_WLED_LED_MODULATOR_EN;
wled_reg_write(PM_WLED_LED_CTNL_REG(1), value);
wled_reg_write(PM_WLED_LED_CTNL_REG(2), value);
wled_reg_write(PM_WLED_LED_CTNL_REG(3), value);
dprintf(SPEW, "WLED LED Module Enable Success\n");
}
void pm8x41_wled_enable(uint8_t enable) {
uint8_t value = 0x0;
if (enable)
value = PM_WLED_ENABLE_MODULE_MASK;
wled_reg_write(PM_WLED_ENABLE, value);
dprintf(SPEW, "WLED Enable Success\n");
}