| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _PLATFORM_MDM9625_IOMAP_H_ |
| #define _PLATFORM_MDM9625_IOMAP_H_ |
| |
| #define MSM_IOMAP_BASE 0xF9000000 |
| #define MSM_IOMAP_END 0xFEFFFFFF |
| |
| #define MSM_SHARED_BASE 0x00000000 |
| |
| /*SDRAM start address */ |
| #define SDRAM_START_ADDR 0x00000000 |
| |
| #define MSM_SHARED_IMEM_BASE 0xFC42A800 |
| #define RESTART_REASON_ADDR (MSM_SHARED_IMEM_BASE + 0x65C) |
| |
| #define MSM_SHARED_IMEM_BASE_V2 0xFE807800 |
| #define RESTART_REASON_ADDR_V2 (MSM_SHARED_IMEM_BASE_V2 + 0x65C) |
| |
| #define ELAN_A5SS_BASE 0xF9000000 |
| |
| /* Peripheral subsystem */ |
| #define PERIPH_SS_BASE 0xF9800000 |
| #define PERIPH_SS_QPIC_BASE 0xF9AC4000 |
| |
| #define CLK_CTL_BASE 0xFC400000 /* GCC base */ |
| |
| /* MPM2_MPM */ |
| #define MPM2_MPM_SLEEP_TIMETICK_COUNT_VAL 0xFC4A3000 |
| #define MPM2_MPM_PS_HOLD 0xFC4AB000 |
| |
| #define SPMI_BASE 0xFC4C0000 |
| #define SPMI_GENI_BASE (SPMI_BASE + 0xA000) |
| #define SPMI_PIC_BASE (SPMI_BASE + 0xB000) |
| #define TLMM_BASE_ADDR 0xFD500000 |
| |
| /* QGIC2 */ |
| #define MSM_GIC_DIST_BASE (ELAN_A5SS_BASE + 0x0000) |
| #define MSM_GIC_CPU_BASE (ELAN_A5SS_BASE + 0x2000) |
| |
| /* QTMR */ |
| #define APCS_F0_QTMR_V1_BASE (ELAN_A5SS_BASE + 0x21000) |
| #define QTMR_BASE APCS_F0_QTMR_V1_BASE |
| |
| /* GPIO */ |
| #define GPIO_CONFIG_ADDR(x) (TLMM_BASE_ADDR + 0x10000 + 0x1000 + (x)*0x10) |
| #define GPIO_IN_OUT_ADDR(x) (TLMM_BASE_ADDR + 0x10000 + 0x1004 + (x)*0x10) |
| |
| /* USB */ |
| #define MSM_USB_BASE (PERIPH_SS_BASE + 0x00255000) |
| |
| /* UART */ |
| #define MSM_UART2_BASE 0xF991F000 |
| |
| /* NAND */ |
| #define MSM_NAND_BASE 0xF9AF0000 |
| /* NAND BAM */ |
| #define MSM_NAND_BAM_BASE 0xF9AC4000 |
| |
| /************ CLOCKS ***********/ |
| |
| /* GPLL */ |
| #define GPLL0_STATUS (CLK_CTL_BASE + 0x001C) |
| #define APCS_GPLL_ENA_VOTE (CLK_CTL_BASE + 0x1480) |
| |
| /* UART */ |
| |
| #define BLSP1_AHB_CBCR (CLK_CTL_BASE + 0x5C4) |
| |
| #define BLSP1_UART1_APPS_CBCR (CLK_CTL_BASE + 0x684) |
| #define BLSP1_UART1_APPS_CMD_RCGR (CLK_CTL_BASE + 0x68C) |
| #define BLSP1_UART1_APPS_CFG_RCGR (CLK_CTL_BASE + 0x690) |
| #define BLSP1_UART1_APPS_M (CLK_CTL_BASE + 0x694) |
| #define BLSP1_UART1_APPS_N (CLK_CTL_BASE + 0x698) |
| #define BLSP1_UART1_APPS_D (CLK_CTL_BASE + 0x69C) |
| |
| #define BLSP1_UART3_APPS_CBCR (CLK_CTL_BASE + 0x784) |
| #define BLSP1_UART3_APPS_CMD_RCGR (CLK_CTL_BASE + 0x78C) |
| #define BLSP1_UART3_APPS_CFG_RCGR (CLK_CTL_BASE + 0x790) |
| #define BLSP1_UART3_APPS_M (CLK_CTL_BASE + 0x794) |
| #define BLSP1_UART3_APPS_N (CLK_CTL_BASE + 0x798) |
| #define BLSP1_UART3_APPS_D (CLK_CTL_BASE + 0x79C) |
| |
| #define BLSP1_UART2_APPS_CBCR (CLK_CTL_BASE + 0x704) |
| #define BLSP1_UART2_APPS_CMD_RCGR (CLK_CTL_BASE + 0x70C) |
| #define BLSP1_UART2_APPS_CFG_RCGR (CLK_CTL_BASE + 0x710) |
| #define BLSP1_UART2_APPS_M (CLK_CTL_BASE + 0x714) |
| #define BLSP1_UART2_APPS_N (CLK_CTL_BASE + 0x718) |
| #define BLSP1_UART2_APPS_D (CLK_CTL_BASE + 0x71C) |
| |
| #define APCS_CLOCK_BRANCH_ENA_VOTE (CLK_CTL_BASE + 0x1484) |
| |
| /* USB */ |
| #define USB_HS_BCR (CLK_CTL_BASE + 0x480) |
| #define USB_HS_SYSTEM_CBCR (CLK_CTL_BASE + 0x484) |
| #define USB_HS_AHB_CBCR (CLK_CTL_BASE + 0x488) |
| #define GCC_USB_HS_INACTIVITY_TIMERS_CBCR (CLK_CTL_BASE + 0x48C) |
| #define USB_HS_SYSTEM_CMD_RCGR (CLK_CTL_BASE + 0x490) |
| #define USB_HS_SYSTEM_CFG_RCGR (CLK_CTL_BASE + 0x494) |
| |
| #endif |