blob: 289e360f38eda63d376bc15eb77eadadaf5f783a [file] [log] [blame]
/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <err.h>
#include <assert.h>
#include <debug.h>
#include <reg.h>
#include <platform/timer.h>
#include <platform/iomap.h>
#include <mmc.h>
#include <clock.h>
#include <platform/clock.h>
#include <blsp_qup.h>
void hsusb_clock_init(void)
{
int ret;
struct clk *iclk, *cclk;
ret = clk_get_set_enable("usb_iface_clk", 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb_iface_clk ret = %d\n", ret);
ASSERT(0);
}
ret = clk_get_set_enable("usb_core_clk", 75000000, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb_core_clk ret = %d\n", ret);
ASSERT(0);
}
mdelay(20);
iclk = clk_get("usb_iface_clk");
cclk = clk_get("usb_core_clk");
clk_disable(iclk);
clk_disable(cclk);
mdelay(20);
/* Start the block reset for usb */
writel(1, USB_HS_BCR);
mdelay(20);
/* Take usb block out of reset */
writel(0, USB_HS_BCR);
mdelay(20);
ret = clk_enable(iclk);
if(ret)
{
dprintf(CRITICAL, "failed to set usb_iface_clk after async ret = %d\n", ret);
ASSERT(0);
}
ret = clk_enable(cclk);
if(ret)
{
dprintf(CRITICAL, "failed to set usb_iface_clk after async ret = %d\n", ret);
ASSERT(0);
}
}
void clock_init_mmc(uint32_t interface)
{
char clk_name[64];
int ret;
snprintf(clk_name, sizeof(clk_name), "sdc%u_iface_clk", interface);
/* enable interface clock */
ret = clk_get_set_enable(clk_name, 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set sdc1_iface_clk ret = %d\n", ret);
ASSERT(0);
}
}
/* Configure MMC clock */
void clock_config_mmc(uint32_t interface, uint32_t freq)
{
int ret;
char clk_name[64];
snprintf(clk_name, sizeof(clk_name), "sdc%u_core_clk", interface);
/* Disalbe MCI_CLK before changing the sdcc clock */
#ifndef MMC_SDHCI_SUPPORT
mmc_boot_mci_clk_disable();
#endif
if(freq == MMC_CLK_400KHZ)
{
ret = clk_get_set_enable(clk_name, 400000, 1);
}
else if(freq == MMC_CLK_20MHZ)
{
ret = clk_get_set_enable(clk_name, 20000000, 1);
}
else if(freq == MMC_CLK_25MHZ)
{
ret = clk_get_set_enable(clk_name, 25000000, 1);
}
else if(freq == MMC_CLK_50MHZ)
{
ret = clk_get_set_enable(clk_name, 50000000, 1);
}
else if(freq == MMC_CLK_96MHZ)
{
ret = clk_get_set_enable(clk_name, 100000000, 1);
}
else if(freq == MMC_CLK_200MHZ)
{
ret = clk_get_set_enable(clk_name, 200000000, 1);
}
else
{
dprintf(CRITICAL, "sdc frequency (%u) is not supported\n", freq);
ret = 0;
ASSERT(0);
}
if(ret)
{
dprintf(CRITICAL, "failed to set sdc%u_core_clk ret = %d\n", interface, ret);
ASSERT(0);
}
/* Enalbe MCI clock */
#ifndef MMC_SDHCI_SUPPORT
mmc_boot_mci_clk_enable();
#endif
}
/* Configure UART clock based on the UART block id*/
void clock_config_uart_dm(uint8_t id)
{
int ret;
char iclk[64];
char cclk[64];
snprintf(iclk, sizeof(iclk), "uart%u_iface_clk", id);
snprintf(cclk, sizeof(cclk), "uart%u_core_clk", id);
ret = clk_get_set_enable(iclk, 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set uart%u_iface_clk ret = %d\n", id, ret);
ASSERT(0);
}
ret = clk_get_set_enable(cclk, 7372800, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set uart%u_core_clk ret = %d\n", id, ret);
ASSERT(0);
}
}
/* Function to asynchronously reset CE.
* Function assumes that all the CE clocks are off.
*/
static void ce_async_reset(uint8_t instance)
{
if (instance == 1)
{
/* TODO: Add support for instance 1. */
dprintf(CRITICAL, "CE instance not supported instance = %d", instance);
ASSERT(0);
}
else if (instance == 2)
{
/* Start the block reset for CE */
writel(1, GCC_CE2_BCR);
udelay(2);
/* Take CE block out of reset */
writel(0, GCC_CE2_BCR);
udelay(2);
}
else
{
dprintf(CRITICAL, "CE instance not supported instance = %d", instance);
ASSERT(0);
}
}
void clock_ce_enable(uint8_t instance)
{
int ret;
char clk_name[64];
snprintf(clk_name, sizeof(clk_name), "ce%u_src_clk", instance);
ret = clk_get_set_enable(clk_name, 100000000, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set ce_src_clk ret = %d\n", ret);
ASSERT(0);
}
snprintf(clk_name, sizeof(clk_name), "ce%u_core_clk", instance);
ret = clk_get_set_enable(clk_name, 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set ce_core_clk ret = %d\n", ret);
ASSERT(0);
}
snprintf(clk_name, sizeof(clk_name), "ce%u_ahb_clk", instance);
ret = clk_get_set_enable(clk_name, 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set ce_ahb_clk ret = %d\n", ret);
ASSERT(0);
}
snprintf(clk_name, sizeof(clk_name), "ce%u_axi_clk", instance);
ret = clk_get_set_enable(clk_name, 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set ce_axi_clk ret = %d\n", ret);
ASSERT(0);
}
/* Wait for 48 * #pipes cycles.
* This is necessary as immediately after an access control reset (boot up)
* or a debug re-enable, the Crypto core sequentially clears its internal
* pipe key storage memory. If pipe key initialization writes are attempted
* during this time, they may be overwritten by the internal clearing logic.
*/
udelay(1);
}
void clock_ce_disable(uint8_t instance)
{
struct clk *ahb_clk;
struct clk *cclk;
struct clk *axi_clk;
struct clk *src_clk;
char clk_name[64];
snprintf(clk_name, sizeof(clk_name), "ce%u_src_clk", instance);
src_clk = clk_get(clk_name);
snprintf(clk_name, sizeof(clk_name), "ce%u_ahb_clk", instance);
ahb_clk = clk_get(clk_name);
snprintf(clk_name, sizeof(clk_name), "ce%u_axi_clk", instance);
axi_clk = clk_get(clk_name);
snprintf(clk_name, sizeof(clk_name), "ce%u_core_clk", instance);
cclk = clk_get(clk_name);
clk_disable(ahb_clk);
clk_disable(axi_clk);
clk_disable(cclk);
clk_disable(src_clk);
/* Some delay for the clocks to stabalize. */
udelay(1);
}
void clock_config_ce(uint8_t instance)
{
/* Need to enable the clock before disabling since the clk_disable()
* has a check to default to nop when the clk_enable() is not called
* on that particular clock.
*/
clock_ce_enable(instance);
clock_ce_disable(instance);
ce_async_reset(instance);
clock_ce_enable(instance);
}
void clock_config_blsp_i2c(uint8_t blsp_id, uint8_t qup_id)
{
uint8_t ret = 0;
char clk_name[64];
struct clk *qup_clk;
snprintf(clk_name, sizeof(clk_name), "blsp%u_ahb_clk", blsp_id);
ret = clk_get_set_enable(clk_name, 0 , 1);
if (ret) {
dprintf(CRITICAL, "Failed to enable %s clock\n", clk_name);
return;
}
snprintf(clk_name, sizeof(clk_name), "blsp%u_qup%u_i2c_apps_clk",
blsp_id, (qup_id + 1));
qup_clk = clk_get(clk_name);
if (!qup_clk) {
dprintf(CRITICAL, "Failed to get %s\n", clk_name);
return;
}
ret = clk_enable(qup_clk);
if (ret) {
dprintf(CRITICAL, "Failed to enable %s\n", clk_name);
return;
}
}
/* enables usb30 clocks */
void clock_usb30_init(void)
{
int ret;
ret = clk_get_set_enable("usb30_iface_clk", 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb30_iface_clk. ret = %d\n", ret);
ASSERT(0);
}
ret = clk_get_set_enable("usb30_master_clk", 125000000, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb30_master_clk. ret = %d\n", ret);
ASSERT(0);
}
ret = clk_get_set_enable("usb30_phy_aux_clk", 1200000, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb30_phy_aux_clk. ret = %d\n", ret);
ASSERT(0);
}
ret = clk_get_set_enable("usb30_mock_utmi_clk", 60000000, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb30_mock_utmi_clk ret = %d\n", ret);
ASSERT(0);
}
ret = clk_get_set_enable("usb30_sleep_clk", 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb30_sleep_clk ret = %d\n", ret);
ASSERT(0);
}
ret = clk_get_set_enable("usb_phy_cfg_ahb2phy_clk", 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to enable usb_phy_cfg_ahb2phy_clk = %d\n", ret);
ASSERT(0);
}
}
void clock_bumpup_pipe3_clk()
{
int ret = 0;
ret = clk_get_set_enable("usb30_pipe_clk", 0, 1);
if(ret)
{
dprintf(CRITICAL, "failed to set usb30_pipe_clk. ret = %d\n", ret);
ASSERT(0);
}
return;
}