| /* |
| * Copyright 2013 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <3>; |
| }; |
| }; |
| |
| memory { |
| reg = <0x40000000 0x80000000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: osc24M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| |
| osc32k: osc32k { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| pll1: pll1@01c20000 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun6i-a31-pll1-clk"; |
| reg = <0x01c20000 0x4>; |
| clocks = <&osc24M>; |
| }; |
| |
| /* |
| * This is a dummy clock, to be used as placeholder on |
| * other mux clocks when a specific parent clock is not |
| * yet implemented. It should be dropped when the driver |
| * is complete. |
| */ |
| pll6: pll6 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| cpu: cpu@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-cpu-clk"; |
| reg = <0x01c20050 0x4>; |
| |
| /* |
| * PLL1 is listed twice here. |
| * While it looks suspicious, it's actually documented |
| * that way both in the datasheet and in the code from |
| * Allwinner. |
| */ |
| clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; |
| }; |
| |
| axi: axi@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-axi-clk"; |
| reg = <0x01c20050 0x4>; |
| clocks = <&cpu>; |
| }; |
| |
| ahb1_mux: ahb1_mux@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; |
| }; |
| |
| ahb1: ahb1@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-ahb-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&ahb1_mux>; |
| }; |
| |
| ahb1_gates: ahb1_gates@01c20060 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; |
| reg = <0x01c20060 0x8>; |
| clocks = <&ahb1>; |
| clock-output-names = "ahb1_mipidsi", "ahb1_ss", |
| "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", |
| "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", |
| "ahb1_nand0", "ahb1_sdram", |
| "ahb1_gmac", "ahb1_ts", "ahb1_hstimer", |
| "ahb1_spi0", "ahb1_spi1", "ahb1_spi2", |
| "ahb1_spi3", "ahb1_otg", "ahb1_ehci0", |
| "ahb1_ehci1", "ahb1_ohci0", |
| "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve", |
| "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi", |
| "ahb1_hdmi", "ahb1_de0", "ahb1_de1", |
| "ahb1_fe0", "ahb1_fe1", "ahb1_mp", |
| "ahb1_gpu", "ahb1_deu0", "ahb1_deu1", |
| "ahb1_drc0", "ahb1_drc1"; |
| }; |
| |
| apb1: apb1@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-apb0-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&ahb1>; |
| }; |
| |
| apb1_gates: apb1_gates@01c20060 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-apb1-gates-clk"; |
| reg = <0x01c20068 0x4>; |
| clocks = <&apb1>; |
| clock-output-names = "apb1_codec", "apb1_digital_mic", |
| "apb1_pio", "apb1_daudio0", |
| "apb1_daudio1"; |
| }; |
| |
| apb2_mux: apb2_mux@01c20058 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-apb1-mux-clk"; |
| reg = <0x01c20058 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; |
| }; |
| |
| apb2: apb2@01c20058 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun6i-a31-apb2-div-clk"; |
| reg = <0x01c20058 0x4>; |
| clocks = <&apb2_mux>; |
| }; |
| |
| apb2_gates: apb2_gates@01c2006c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-apb2-gates-clk"; |
| reg = <0x01c2006c 0x4>; |
| clocks = <&apb2>; |
| clock-output-names = "apb2_i2c0", "apb2_i2c1", |
| "apb2_i2c2", "apb2_i2c3", "apb2_uart0", |
| "apb2_uart1", "apb2_uart2", "apb2_uart3", |
| "apb2_uart4", "apb2_uart5"; |
| }; |
| }; |
| |
| soc@01c00000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pio: pinctrl@01c20800 { |
| compatible = "allwinner,sun6i-a31-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <0 11 4>, |
| <0 15 4>, |
| <0 16 4>, |
| <0 17 4>; |
| clocks = <&apb1_gates 5>; |
| gpio-controller; |
| interrupt-controller; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #gpio-cells = <3>; |
| |
| uart0_pins_a: uart0@0 { |
| allwinner,pins = "PH20", "PH21"; |
| allwinner,function = "uart0"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| }; |
| |
| timer@01c20c00 { |
| compatible = "allwinner,sun4i-timer"; |
| reg = <0x01c20c00 0xa0>; |
| interrupts = <0 18 4>, |
| <0 19 4>, |
| <0 20 4>, |
| <0 21 4>, |
| <0 22 4>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt1: watchdog@01c20ca0 { |
| compatible = "allwinner,sun6i-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| }; |
| |
| uart0: serial@01c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <0 0 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 16>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@01c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <0 1 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 17>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@01c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <0 2 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 18>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@01c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <0 3 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 19>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@01c29000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29000 0x400>; |
| interrupts = <0 4 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 20>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@01c29400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29400 0x400>; |
| interrupts = <0 5 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 21>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@01c81000 { |
| compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x1000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <1 9 0xf04>; |
| }; |
| }; |
| }; |