| /****************************************************************************** |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/firmware.h> |
| |
| #include "iwl-ucode.h" |
| #include "iwl-wifi.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-io.h" |
| #include "iwl-agn-hw.h" |
| #include "iwl-agn.h" |
| #include "iwl-agn-calib.h" |
| #include "iwl-trans.h" |
| #include "iwl-fh.h" |
| #include "iwl-op-mode.h" |
| |
| static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = { |
| {COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP, |
| 0, COEX_UNASSOC_IDLE_FLAGS}, |
| {COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP, |
| 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS}, |
| {COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP, |
| 0, COEX_UNASSOC_AUTO_SCAN_FLAGS}, |
| {COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP, |
| 0, COEX_CALIBRATION_FLAGS}, |
| {COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP, |
| 0, COEX_PERIODIC_CALIBRATION_FLAGS}, |
| {COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP, |
| 0, COEX_CONNECTION_ESTAB_FLAGS}, |
| {COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP, |
| 0, COEX_ASSOCIATED_IDLE_FLAGS}, |
| {COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP, |
| 0, COEX_ASSOC_MANUAL_SCAN_FLAGS}, |
| {COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP, |
| 0, COEX_ASSOC_AUTO_SCAN_FLAGS}, |
| {COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP, |
| 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS}, |
| {COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS}, |
| {COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS}, |
| {COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP, |
| 0, COEX_STAND_ALONE_DEBUG_FLAGS}, |
| {COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP, |
| 0, COEX_IPAN_ASSOC_LEVEL_FLAGS}, |
| {COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS}, |
| {COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS} |
| }; |
| |
| /****************************************************************************** |
| * |
| * uCode download functions |
| * |
| ******************************************************************************/ |
| |
| static void iwl_free_fw_desc(struct iwl_nic *nic, struct fw_desc *desc) |
| { |
| if (desc->v_addr) |
| dma_free_coherent(trans(nic)->dev, desc->len, |
| desc->v_addr, desc->p_addr); |
| desc->v_addr = NULL; |
| desc->len = 0; |
| } |
| |
| static void iwl_free_fw_img(struct iwl_nic *nic, struct fw_img *img) |
| { |
| iwl_free_fw_desc(nic, &img->code); |
| iwl_free_fw_desc(nic, &img->data); |
| } |
| |
| void iwl_dealloc_ucode(struct iwl_nic *nic) |
| { |
| iwl_free_fw_img(nic, &nic->fw.ucode_rt); |
| iwl_free_fw_img(nic, &nic->fw.ucode_init); |
| iwl_free_fw_img(nic, &nic->fw.ucode_wowlan); |
| } |
| |
| static int iwl_alloc_fw_desc(struct iwl_nic *nic, struct fw_desc *desc, |
| const void *data, size_t len) |
| { |
| if (!len) { |
| desc->v_addr = NULL; |
| return -EINVAL; |
| } |
| |
| desc->v_addr = dma_alloc_coherent(trans(nic)->dev, len, |
| &desc->p_addr, GFP_KERNEL); |
| if (!desc->v_addr) |
| return -ENOMEM; |
| |
| desc->len = len; |
| memcpy(desc->v_addr, data, len); |
| return 0; |
| } |
| |
| static inline struct fw_img *iwl_get_ucode_image(struct iwl_nic *nic, |
| enum iwl_ucode_type ucode_type) |
| { |
| switch (ucode_type) { |
| case IWL_UCODE_INIT: |
| return &nic->fw.ucode_init; |
| case IWL_UCODE_WOWLAN: |
| return &nic->fw.ucode_wowlan; |
| case IWL_UCODE_REGULAR: |
| return &nic->fw.ucode_rt; |
| case IWL_UCODE_NONE: |
| break; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Calibration |
| */ |
| static int iwl_set_Xtal_calib(struct iwl_trans *trans) |
| { |
| struct iwl_calib_xtal_freq_cmd cmd; |
| __le16 *xtal_calib = |
| (__le16 *)iwl_eeprom_query_addr(trans->shrd, EEPROM_XTAL); |
| |
| iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD); |
| cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]); |
| cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]); |
| return iwl_calib_set(trans, (void *)&cmd, sizeof(cmd)); |
| } |
| |
| static int iwl_set_temperature_offset_calib(struct iwl_trans *trans) |
| { |
| struct iwl_calib_temperature_offset_cmd cmd; |
| __le16 *offset_calib = |
| (__le16 *)iwl_eeprom_query_addr(trans->shrd, |
| EEPROM_RAW_TEMPERATURE); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); |
| memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib)); |
| if (!(cmd.radio_sensor_offset)) |
| cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET; |
| |
| IWL_DEBUG_CALIB(trans, "Radio sensor offset: %d\n", |
| le16_to_cpu(cmd.radio_sensor_offset)); |
| return iwl_calib_set(trans, (void *)&cmd, sizeof(cmd)); |
| } |
| |
| static int iwl_set_temperature_offset_calib_v2(struct iwl_trans *trans) |
| { |
| struct iwl_calib_temperature_offset_v2_cmd cmd; |
| __le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(trans->shrd, |
| EEPROM_KELVIN_TEMPERATURE); |
| __le16 *offset_calib_low = |
| (__le16 *)iwl_eeprom_query_addr(trans->shrd, |
| EEPROM_RAW_TEMPERATURE); |
| struct iwl_eeprom_calib_hdr *hdr; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); |
| hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(trans->shrd, |
| EEPROM_CALIB_ALL); |
| memcpy(&cmd.radio_sensor_offset_high, offset_calib_high, |
| sizeof(*offset_calib_high)); |
| memcpy(&cmd.radio_sensor_offset_low, offset_calib_low, |
| sizeof(*offset_calib_low)); |
| if (!(cmd.radio_sensor_offset_low)) { |
| IWL_DEBUG_CALIB(trans, "no info in EEPROM, use default\n"); |
| cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET; |
| cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET; |
| } |
| memcpy(&cmd.burntVoltageRef, &hdr->voltage, |
| sizeof(hdr->voltage)); |
| |
| IWL_DEBUG_CALIB(trans, "Radio sensor offset high: %d\n", |
| le16_to_cpu(cmd.radio_sensor_offset_high)); |
| IWL_DEBUG_CALIB(trans, "Radio sensor offset low: %d\n", |
| le16_to_cpu(cmd.radio_sensor_offset_low)); |
| IWL_DEBUG_CALIB(trans, "Voltage Ref: %d\n", |
| le16_to_cpu(cmd.burntVoltageRef)); |
| |
| return iwl_calib_set(trans, (void *)&cmd, sizeof(cmd)); |
| } |
| |
| static int iwl_send_calib_cfg(struct iwl_trans *trans) |
| { |
| struct iwl_calib_cfg_cmd calib_cfg_cmd; |
| struct iwl_host_cmd cmd = { |
| .id = CALIBRATION_CFG_CMD, |
| .len = { sizeof(struct iwl_calib_cfg_cmd), }, |
| .data = { &calib_cfg_cmd, }, |
| }; |
| |
| memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); |
| calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL; |
| calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL; |
| calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL; |
| calib_cfg_cmd.ucd_calib_cfg.flags = |
| IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK; |
| |
| return iwl_trans_send_cmd(trans, &cmd); |
| } |
| |
| int iwlagn_rx_calib_result(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb, |
| struct iwl_device_cmd *cmd) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw; |
| int len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; |
| |
| /* reduce the size of the length field itself */ |
| len -= 4; |
| |
| if (iwl_calib_set(trans(priv), hdr, len)) |
| IWL_ERR(priv, "Failed to record calibration data %d\n", |
| hdr->op_code); |
| |
| return 0; |
| } |
| |
| int iwl_init_alive_start(struct iwl_trans *trans) |
| { |
| int ret; |
| |
| if (cfg(trans)->bt_params && |
| cfg(trans)->bt_params->advanced_bt_coexist) { |
| /* |
| * Tell uCode we are ready to perform calibration |
| * need to perform this before any calibration |
| * no need to close the envlope since we are going |
| * to load the runtime uCode later. |
| */ |
| ret = iwl_send_bt_env(trans, IWL_BT_COEX_ENV_OPEN, |
| BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); |
| if (ret) |
| return ret; |
| |
| } |
| |
| ret = iwl_send_calib_cfg(trans); |
| if (ret) |
| return ret; |
| |
| /** |
| * temperature offset calibration is only needed for runtime ucode, |
| * so prepare the value now. |
| */ |
| if (cfg(trans)->need_temp_offset_calib) { |
| if (cfg(trans)->temp_offset_v2) |
| return iwl_set_temperature_offset_calib_v2(trans); |
| else |
| return iwl_set_temperature_offset_calib(trans); |
| } |
| |
| return 0; |
| } |
| |
| static int iwl_send_wimax_coex(struct iwl_trans *trans) |
| { |
| struct iwl_wimax_coex_cmd coex_cmd; |
| |
| if (cfg(trans)->base_params->support_wimax_coexist) { |
| /* UnMask wake up src at associated sleep */ |
| coex_cmd.flags = COEX_FLAGS_ASSOC_WA_UNMASK_MSK; |
| |
| /* UnMask wake up src at unassociated sleep */ |
| coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK; |
| memcpy(coex_cmd.sta_prio, cu_priorities, |
| sizeof(struct iwl_wimax_coex_event_entry) * |
| COEX_NUM_OF_EVENTS); |
| |
| /* enabling the coexistence feature */ |
| coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK; |
| |
| /* enabling the priorities tables */ |
| coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK; |
| } else { |
| /* coexistence is disabled */ |
| memset(&coex_cmd, 0, sizeof(coex_cmd)); |
| } |
| return iwl_trans_send_cmd_pdu(trans, |
| COEX_PRIORITY_TABLE_CMD, CMD_SYNC, |
| sizeof(coex_cmd), &coex_cmd); |
| } |
| |
| static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = { |
| ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| ((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | |
| (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), |
| 0, 0, 0, 0, 0, 0, 0 |
| }; |
| |
| void iwl_send_prio_tbl(struct iwl_trans *trans) |
| { |
| struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd; |
| |
| memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl, |
| sizeof(iwl_bt_prio_tbl)); |
| if (iwl_trans_send_cmd_pdu(trans, |
| REPLY_BT_COEX_PRIO_TABLE, CMD_SYNC, |
| sizeof(prio_tbl_cmd), &prio_tbl_cmd)) |
| IWL_ERR(trans, "failed to send BT prio tbl command\n"); |
| } |
| |
| int iwl_send_bt_env(struct iwl_trans *trans, u8 action, u8 type) |
| { |
| struct iwl_bt_coex_prot_env_cmd env_cmd; |
| int ret; |
| |
| env_cmd.action = action; |
| env_cmd.type = type; |
| ret = iwl_trans_send_cmd_pdu(trans, |
| REPLY_BT_COEX_PROT_ENV, CMD_SYNC, |
| sizeof(env_cmd), &env_cmd); |
| if (ret) |
| IWL_ERR(trans, "failed to send BT env command\n"); |
| return ret; |
| } |
| |
| |
| static int iwl_alive_notify(struct iwl_trans *trans) |
| { |
| struct iwl_priv *priv = priv(trans); |
| struct iwl_rxon_context *ctx; |
| int ret; |
| |
| if (!priv->tx_cmd_pool) |
| priv->tx_cmd_pool = |
| kmem_cache_create("iwl_dev_cmd", |
| sizeof(struct iwl_device_cmd), |
| sizeof(void *), 0, NULL); |
| |
| if (!priv->tx_cmd_pool) |
| return -ENOMEM; |
| |
| iwl_trans_fw_alive(trans); |
| for_each_context(priv, ctx) |
| ctx->last_tx_rejected = false; |
| |
| ret = iwl_send_wimax_coex(trans); |
| if (ret) |
| return ret; |
| |
| if (!cfg(priv)->no_xtal_calib) { |
| ret = iwl_set_Xtal_calib(trans); |
| if (ret) |
| return ret; |
| } |
| |
| return iwl_send_calib_results(trans); |
| } |
| |
| |
| /** |
| * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, |
| * using sample data 100 bytes apart. If these sample points are good, |
| * it's a pretty good bet that everything between them is good, too. |
| */ |
| static int iwl_verify_inst_sparse(struct iwl_nic *nic, |
| struct fw_desc *fw_desc) |
| { |
| struct iwl_trans *trans = trans(nic); |
| __le32 *image = (__le32 *)fw_desc->v_addr; |
| u32 len = fw_desc->len; |
| u32 val; |
| u32 i; |
| |
| IWL_DEBUG_FW(nic, "ucode inst image size is %u\n", len); |
| |
| for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { |
| /* read data comes through single port, auto-incr addr */ |
| /* NOTE: Use the debugless read so we don't flood kernel log |
| * if IWL_DL_IO is set */ |
| iwl_write_direct32(trans, HBUS_TARG_MEM_RADDR, |
| i + IWLAGN_RTC_INST_LOWER_BOUND); |
| val = iwl_read32(trans, HBUS_TARG_MEM_RDAT); |
| if (val != le32_to_cpu(*image)) |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void iwl_print_mismatch_inst(struct iwl_nic *nic, |
| struct fw_desc *fw_desc) |
| { |
| struct iwl_trans *trans = trans(nic); |
| __le32 *image = (__le32 *)fw_desc->v_addr; |
| u32 len = fw_desc->len; |
| u32 val; |
| u32 offs; |
| int errors = 0; |
| |
| IWL_DEBUG_FW(nic, "ucode inst image size is %u\n", len); |
| |
| iwl_write_direct32(trans, HBUS_TARG_MEM_RADDR, |
| IWLAGN_RTC_INST_LOWER_BOUND); |
| |
| for (offs = 0; |
| offs < len && errors < 20; |
| offs += sizeof(u32), image++) { |
| /* read data comes through single port, auto-incr addr */ |
| val = iwl_read32(trans, HBUS_TARG_MEM_RDAT); |
| if (val != le32_to_cpu(*image)) { |
| IWL_ERR(nic, "uCode INST section at " |
| "offset 0x%x, is 0x%x, s/b 0x%x\n", |
| offs, val, le32_to_cpu(*image)); |
| errors++; |
| } |
| } |
| } |
| |
| /** |
| * iwl_verify_ucode - determine which instruction image is in SRAM, |
| * and verify its contents |
| */ |
| static int iwl_verify_ucode(struct iwl_nic *nic, |
| enum iwl_ucode_type ucode_type) |
| { |
| struct fw_img *img = iwl_get_ucode_image(nic, ucode_type); |
| |
| if (!img) { |
| IWL_ERR(nic, "Invalid ucode requested (%d)\n", ucode_type); |
| return -EINVAL; |
| } |
| |
| if (!iwl_verify_inst_sparse(nic, &img->code)) { |
| IWL_DEBUG_FW(nic, "uCode is good in inst SRAM\n"); |
| return 0; |
| } |
| |
| IWL_ERR(nic, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n"); |
| |
| iwl_print_mismatch_inst(nic, &img->code); |
| return -EIO; |
| } |
| |
| struct iwl_alive_data { |
| bool valid; |
| u8 subtype; |
| }; |
| |
| static void iwl_alive_fn(struct iwl_trans *trans, |
| struct iwl_rx_packet *pkt, |
| void *data) |
| { |
| struct iwl_alive_data *alive_data = data; |
| struct iwl_alive_resp *palive; |
| |
| palive = &pkt->u.alive_frame; |
| |
| IWL_DEBUG_FW(trans, "Alive ucode status 0x%08X revision " |
| "0x%01X 0x%01X\n", |
| palive->is_valid, palive->ver_type, |
| palive->ver_subtype); |
| |
| trans->shrd->device_pointers.error_event_table = |
| le32_to_cpu(palive->error_event_table_ptr); |
| trans->shrd->device_pointers.log_event_table = |
| le32_to_cpu(palive->log_event_table_ptr); |
| |
| alive_data->subtype = palive->ver_subtype; |
| alive_data->valid = palive->is_valid == UCODE_VALID_OK; |
| } |
| |
| /* notification wait support */ |
| void iwl_init_notification_wait(struct iwl_shared *shrd, |
| struct iwl_notification_wait *wait_entry, |
| u8 cmd, |
| void (*fn)(struct iwl_trans *trans, |
| struct iwl_rx_packet *pkt, |
| void *data), |
| void *fn_data) |
| { |
| wait_entry->fn = fn; |
| wait_entry->fn_data = fn_data; |
| wait_entry->cmd = cmd; |
| wait_entry->triggered = false; |
| wait_entry->aborted = false; |
| |
| spin_lock_bh(&shrd->notif_wait_lock); |
| list_add(&wait_entry->list, &shrd->notif_waits); |
| spin_unlock_bh(&shrd->notif_wait_lock); |
| } |
| |
| int iwl_wait_notification(struct iwl_shared *shrd, |
| struct iwl_notification_wait *wait_entry, |
| unsigned long timeout) |
| { |
| int ret; |
| |
| ret = wait_event_timeout(shrd->notif_waitq, |
| wait_entry->triggered || wait_entry->aborted, |
| timeout); |
| |
| spin_lock_bh(&shrd->notif_wait_lock); |
| list_del(&wait_entry->list); |
| spin_unlock_bh(&shrd->notif_wait_lock); |
| |
| if (wait_entry->aborted) |
| return -EIO; |
| |
| /* return value is always >= 0 */ |
| if (ret <= 0) |
| return -ETIMEDOUT; |
| return 0; |
| } |
| |
| void iwl_remove_notification(struct iwl_shared *shrd, |
| struct iwl_notification_wait *wait_entry) |
| { |
| spin_lock_bh(&shrd->notif_wait_lock); |
| list_del(&wait_entry->list); |
| spin_unlock_bh(&shrd->notif_wait_lock); |
| } |
| |
| void iwl_abort_notification_waits(struct iwl_shared *shrd) |
| { |
| unsigned long flags; |
| struct iwl_notification_wait *wait_entry; |
| |
| spin_lock_irqsave(&shrd->notif_wait_lock, flags); |
| list_for_each_entry(wait_entry, &shrd->notif_waits, list) |
| wait_entry->aborted = true; |
| spin_unlock_irqrestore(&shrd->notif_wait_lock, flags); |
| |
| wake_up_all(&shrd->notif_waitq); |
| } |
| |
| #define UCODE_ALIVE_TIMEOUT HZ |
| #define UCODE_CALIB_TIMEOUT (2*HZ) |
| |
| int iwl_load_ucode_wait_alive(struct iwl_trans *trans, |
| enum iwl_ucode_type ucode_type) |
| { |
| struct iwl_notification_wait alive_wait; |
| struct iwl_alive_data alive_data; |
| struct fw_img *fw; |
| int ret; |
| enum iwl_ucode_type old_type; |
| |
| iwl_init_notification_wait(trans->shrd, &alive_wait, REPLY_ALIVE, |
| iwl_alive_fn, &alive_data); |
| |
| old_type = trans->shrd->ucode_type; |
| trans->shrd->ucode_type = ucode_type; |
| fw = iwl_get_ucode_image(nic(trans), ucode_type); |
| |
| if (!fw) |
| return -EINVAL; |
| |
| ret = iwl_trans_start_fw(trans, fw); |
| if (ret) { |
| trans->shrd->ucode_type = old_type; |
| iwl_remove_notification(trans->shrd, &alive_wait); |
| return ret; |
| } |
| |
| /* |
| * Some things may run in the background now, but we |
| * just wait for the ALIVE notification here. |
| */ |
| ret = iwl_wait_notification(trans->shrd, &alive_wait, |
| UCODE_ALIVE_TIMEOUT); |
| if (ret) { |
| trans->shrd->ucode_type = old_type; |
| return ret; |
| } |
| |
| if (!alive_data.valid) { |
| IWL_ERR(trans, "Loaded ucode is not valid!\n"); |
| trans->shrd->ucode_type = old_type; |
| return -EIO; |
| } |
| |
| /* |
| * This step takes a long time (60-80ms!!) and |
| * WoWLAN image should be loaded quickly, so |
| * skip it for WoWLAN. |
| */ |
| if (ucode_type != IWL_UCODE_WOWLAN) { |
| ret = iwl_verify_ucode(nic(trans), ucode_type); |
| if (ret) { |
| trans->shrd->ucode_type = old_type; |
| return ret; |
| } |
| |
| /* delay a bit to give rfkill time to run */ |
| msleep(5); |
| } |
| |
| ret = iwl_alive_notify(trans); |
| if (ret) { |
| IWL_WARN(trans, |
| "Could not complete ALIVE transition: %d\n", ret); |
| trans->shrd->ucode_type = old_type; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int iwl_run_init_ucode(struct iwl_trans *trans) |
| { |
| struct iwl_notification_wait calib_wait; |
| int ret; |
| |
| lockdep_assert_held(&trans->shrd->mutex); |
| |
| /* No init ucode required? Curious, but maybe ok */ |
| if (!nic(trans)->fw.ucode_init.code.len) |
| return 0; |
| |
| if (trans->shrd->ucode_type != IWL_UCODE_NONE) |
| return 0; |
| |
| iwl_init_notification_wait(trans->shrd, &calib_wait, |
| CALIBRATION_COMPLETE_NOTIFICATION, |
| NULL, NULL); |
| |
| /* Will also start the device */ |
| ret = iwl_load_ucode_wait_alive(trans, IWL_UCODE_INIT); |
| if (ret) |
| goto error; |
| |
| ret = iwl_init_alive_start(trans); |
| if (ret) |
| goto error; |
| |
| /* |
| * Some things may run in the background now, but we |
| * just wait for the calibration complete notification. |
| */ |
| ret = iwl_wait_notification(trans->shrd, &calib_wait, |
| UCODE_CALIB_TIMEOUT); |
| |
| goto out; |
| |
| error: |
| iwl_remove_notification(trans->shrd, &calib_wait); |
| out: |
| /* Whatever happened, stop the device */ |
| iwl_trans_stop_device(trans); |
| return ret; |
| } |
| |
| static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context); |
| |
| #define UCODE_EXPERIMENTAL_TAG "exp" |
| |
| int __must_check iwl_request_firmware(struct iwl_nic *nic, bool first) |
| { |
| struct iwl_cfg *cfg = cfg(nic); |
| const char *name_pre = cfg->fw_name_pre; |
| char tag[8]; |
| |
| if (first) { |
| #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE |
| nic->fw_index = UCODE_EXPERIMENTAL_INDEX; |
| strcpy(tag, UCODE_EXPERIMENTAL_TAG); |
| } else if (nic->fw_index == UCODE_EXPERIMENTAL_INDEX) { |
| #endif |
| nic->fw_index = cfg->ucode_api_max; |
| sprintf(tag, "%d", nic->fw_index); |
| } else { |
| nic->fw_index--; |
| sprintf(tag, "%d", nic->fw_index); |
| } |
| |
| if (nic->fw_index < cfg->ucode_api_min) { |
| IWL_ERR(nic, "no suitable firmware found!\n"); |
| return -ENOENT; |
| } |
| |
| sprintf(nic->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); |
| |
| IWL_DEBUG_INFO(nic, "attempting to load firmware %s'%s'\n", |
| (nic->fw_index == UCODE_EXPERIMENTAL_INDEX) |
| ? "EXPERIMENTAL " : "", |
| nic->firmware_name); |
| |
| return request_firmware_nowait(THIS_MODULE, 1, nic->firmware_name, |
| trans(nic)->dev, |
| GFP_KERNEL, nic, iwl_ucode_callback); |
| } |
| |
| struct iwlagn_firmware_pieces { |
| const void *inst, *data, *init, *init_data, *wowlan_inst, *wowlan_data; |
| size_t inst_size, data_size, init_size, init_data_size, |
| wowlan_inst_size, wowlan_data_size; |
| |
| u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; |
| u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; |
| }; |
| |
| static int iwl_parse_v1_v2_firmware(struct iwl_nic *nic, |
| const struct firmware *ucode_raw, |
| struct iwlagn_firmware_pieces *pieces) |
| { |
| struct iwl_ucode_header *ucode = (void *)ucode_raw->data; |
| u32 api_ver, hdr_size, build; |
| char buildstr[25]; |
| const u8 *src; |
| |
| nic->fw.ucode_ver = le32_to_cpu(ucode->ver); |
| api_ver = IWL_UCODE_API(nic->fw.ucode_ver); |
| |
| switch (api_ver) { |
| default: |
| hdr_size = 28; |
| if (ucode_raw->size < hdr_size) { |
| IWL_ERR(nic, "File size too small!\n"); |
| return -EINVAL; |
| } |
| build = le32_to_cpu(ucode->u.v2.build); |
| pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size); |
| pieces->data_size = le32_to_cpu(ucode->u.v2.data_size); |
| pieces->init_size = le32_to_cpu(ucode->u.v2.init_size); |
| pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size); |
| src = ucode->u.v2.data; |
| break; |
| case 0: |
| case 1: |
| case 2: |
| hdr_size = 24; |
| if (ucode_raw->size < hdr_size) { |
| IWL_ERR(nic, "File size too small!\n"); |
| return -EINVAL; |
| } |
| build = 0; |
| pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size); |
| pieces->data_size = le32_to_cpu(ucode->u.v1.data_size); |
| pieces->init_size = le32_to_cpu(ucode->u.v1.init_size); |
| pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size); |
| src = ucode->u.v1.data; |
| break; |
| } |
| |
| if (build) |
| sprintf(buildstr, " build %u%s", build, |
| (nic->fw_index == UCODE_EXPERIMENTAL_INDEX) |
| ? " (EXP)" : ""); |
| else |
| buildstr[0] = '\0'; |
| |
| snprintf(nic->fw.fw_version, |
| sizeof(nic->fw.fw_version), |
| "%u.%u.%u.%u%s", |
| IWL_UCODE_MAJOR(nic->fw.ucode_ver), |
| IWL_UCODE_MINOR(nic->fw.ucode_ver), |
| IWL_UCODE_API(nic->fw.ucode_ver), |
| IWL_UCODE_SERIAL(nic->fw.ucode_ver), |
| buildstr); |
| |
| /* Verify size of file vs. image size info in file's header */ |
| if (ucode_raw->size != hdr_size + pieces->inst_size + |
| pieces->data_size + pieces->init_size + |
| pieces->init_data_size) { |
| |
| IWL_ERR(nic, |
| "uCode file size %d does not match expected size\n", |
| (int)ucode_raw->size); |
| return -EINVAL; |
| } |
| |
| pieces->inst = src; |
| src += pieces->inst_size; |
| pieces->data = src; |
| src += pieces->data_size; |
| pieces->init = src; |
| src += pieces->init_size; |
| pieces->init_data = src; |
| src += pieces->init_data_size; |
| |
| return 0; |
| } |
| |
| static int iwl_parse_tlv_firmware(struct iwl_nic *nic, |
| const struct firmware *ucode_raw, |
| struct iwlagn_firmware_pieces *pieces, |
| struct iwl_ucode_capabilities *capa) |
| { |
| struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data; |
| struct iwl_ucode_tlv *tlv; |
| size_t len = ucode_raw->size; |
| const u8 *data; |
| int wanted_alternative = iwlagn_mod_params.wanted_ucode_alternative; |
| int tmp; |
| u64 alternatives; |
| u32 tlv_len; |
| enum iwl_ucode_tlv_type tlv_type; |
| const u8 *tlv_data; |
| char buildstr[25]; |
| u32 build; |
| |
| if (len < sizeof(*ucode)) { |
| IWL_ERR(nic, "uCode has invalid length: %zd\n", len); |
| return -EINVAL; |
| } |
| |
| if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) { |
| IWL_ERR(nic, "invalid uCode magic: 0X%x\n", |
| le32_to_cpu(ucode->magic)); |
| return -EINVAL; |
| } |
| |
| /* |
| * Check which alternatives are present, and "downgrade" |
| * when the chosen alternative is not present, warning |
| * the user when that happens. Some files may not have |
| * any alternatives, so don't warn in that case. |
| */ |
| alternatives = le64_to_cpu(ucode->alternatives); |
| tmp = wanted_alternative; |
| if (wanted_alternative > 63) |
| wanted_alternative = 63; |
| while (wanted_alternative && !(alternatives & BIT(wanted_alternative))) |
| wanted_alternative--; |
| if (wanted_alternative && wanted_alternative != tmp) |
| IWL_WARN(nic, |
| "uCode alternative %d not available, choosing %d\n", |
| tmp, wanted_alternative); |
| |
| nic->fw.ucode_ver = le32_to_cpu(ucode->ver); |
| build = le32_to_cpu(ucode->build); |
| |
| if (build) |
| sprintf(buildstr, " build %u%s", build, |
| (nic->fw_index == UCODE_EXPERIMENTAL_INDEX) |
| ? " (EXP)" : ""); |
| else |
| buildstr[0] = '\0'; |
| |
| snprintf(nic->fw.fw_version, |
| sizeof(nic->fw.fw_version), |
| "%u.%u.%u.%u%s", |
| IWL_UCODE_MAJOR(nic->fw.ucode_ver), |
| IWL_UCODE_MINOR(nic->fw.ucode_ver), |
| IWL_UCODE_API(nic->fw.ucode_ver), |
| IWL_UCODE_SERIAL(nic->fw.ucode_ver), |
| buildstr); |
| |
| data = ucode->data; |
| |
| len -= sizeof(*ucode); |
| |
| while (len >= sizeof(*tlv)) { |
| u16 tlv_alt; |
| |
| len -= sizeof(*tlv); |
| tlv = (void *)data; |
| |
| tlv_len = le32_to_cpu(tlv->length); |
| tlv_type = le16_to_cpu(tlv->type); |
| tlv_alt = le16_to_cpu(tlv->alternative); |
| tlv_data = tlv->data; |
| |
| if (len < tlv_len) { |
| IWL_ERR(nic, "invalid TLV len: %zd/%u\n", |
| len, tlv_len); |
| return -EINVAL; |
| } |
| len -= ALIGN(tlv_len, 4); |
| data += sizeof(*tlv) + ALIGN(tlv_len, 4); |
| |
| /* |
| * Alternative 0 is always valid. |
| * |
| * Skip alternative TLVs that are not selected. |
| */ |
| if (tlv_alt != 0 && tlv_alt != wanted_alternative) |
| continue; |
| |
| switch (tlv_type) { |
| case IWL_UCODE_TLV_INST: |
| pieces->inst = tlv_data; |
| pieces->inst_size = tlv_len; |
| break; |
| case IWL_UCODE_TLV_DATA: |
| pieces->data = tlv_data; |
| pieces->data_size = tlv_len; |
| break; |
| case IWL_UCODE_TLV_INIT: |
| pieces->init = tlv_data; |
| pieces->init_size = tlv_len; |
| break; |
| case IWL_UCODE_TLV_INIT_DATA: |
| pieces->init_data = tlv_data; |
| pieces->init_data_size = tlv_len; |
| break; |
| case IWL_UCODE_TLV_BOOT: |
| IWL_ERR(nic, "Found unexpected BOOT ucode\n"); |
| break; |
| case IWL_UCODE_TLV_PROBE_MAX_LEN: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| capa->max_probe_length = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_PAN: |
| if (tlv_len) |
| goto invalid_tlv_len; |
| capa->flags |= IWL_UCODE_TLV_FLAGS_PAN; |
| break; |
| case IWL_UCODE_TLV_FLAGS: |
| /* must be at least one u32 */ |
| if (tlv_len < sizeof(u32)) |
| goto invalid_tlv_len; |
| /* and a proper number of u32s */ |
| if (tlv_len % sizeof(u32)) |
| goto invalid_tlv_len; |
| /* |
| * This driver only reads the first u32 as |
| * right now no more features are defined, |
| * if that changes then either the driver |
| * will not work with the new firmware, or |
| * it'll not take advantage of new features. |
| */ |
| capa->flags = le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_INIT_EVTLOG_PTR: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| pieces->init_evtlog_ptr = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_INIT_EVTLOG_SIZE: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| pieces->init_evtlog_size = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_INIT_ERRLOG_PTR: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| pieces->init_errlog_ptr = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_RUNT_EVTLOG_PTR: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| pieces->inst_evtlog_ptr = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| pieces->inst_evtlog_size = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_RUNT_ERRLOG_PTR: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| pieces->inst_errlog_ptr = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| case IWL_UCODE_TLV_ENHANCE_SENS_TBL: |
| if (tlv_len) |
| goto invalid_tlv_len; |
| nic->fw.enhance_sensitivity_table = true; |
| break; |
| case IWL_UCODE_TLV_WOWLAN_INST: |
| pieces->wowlan_inst = tlv_data; |
| pieces->wowlan_inst_size = tlv_len; |
| break; |
| case IWL_UCODE_TLV_WOWLAN_DATA: |
| pieces->wowlan_data = tlv_data; |
| pieces->wowlan_data_size = tlv_len; |
| break; |
| case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: |
| if (tlv_len != sizeof(u32)) |
| goto invalid_tlv_len; |
| capa->standard_phy_calibration_size = |
| le32_to_cpup((__le32 *)tlv_data); |
| break; |
| default: |
| IWL_DEBUG_INFO(nic, "unknown TLV: %d\n", tlv_type); |
| break; |
| } |
| } |
| |
| if (len) { |
| IWL_ERR(nic, "invalid TLV after parsing: %zd\n", len); |
| iwl_print_hex_dump(nic, IWL_DL_FW, (u8 *)data, len); |
| return -EINVAL; |
| } |
| |
| return 0; |
| |
| invalid_tlv_len: |
| IWL_ERR(nic, "TLV %d has invalid size: %u\n", tlv_type, tlv_len); |
| iwl_print_hex_dump(nic, IWL_DL_FW, tlv_data, tlv_len); |
| |
| return -EINVAL; |
| } |
| |
| /** |
| * iwl_ucode_callback - callback when firmware was loaded |
| * |
| * If loaded successfully, copies the firmware into buffers |
| * for the card to fetch (via DMA). |
| */ |
| static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) |
| { |
| struct iwl_nic *nic = context; |
| struct iwl_cfg *cfg = cfg(nic); |
| struct iwl_fw *fw = &nic->fw; |
| struct iwl_ucode_header *ucode; |
| int err; |
| struct iwlagn_firmware_pieces pieces; |
| const unsigned int api_max = cfg->ucode_api_max; |
| unsigned int api_ok = cfg->ucode_api_ok; |
| const unsigned int api_min = cfg->ucode_api_min; |
| u32 api_ver; |
| |
| fw->ucode_capa.max_probe_length = 200; |
| fw->ucode_capa.standard_phy_calibration_size = |
| IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; |
| |
| if (!api_ok) |
| api_ok = api_max; |
| |
| memset(&pieces, 0, sizeof(pieces)); |
| |
| if (!ucode_raw) { |
| if (nic->fw_index <= api_ok) |
| IWL_ERR(nic, |
| "request for firmware file '%s' failed.\n", |
| nic->firmware_name); |
| goto try_again; |
| } |
| |
| IWL_DEBUG_INFO(nic, "Loaded firmware file '%s' (%zd bytes).\n", |
| nic->firmware_name, ucode_raw->size); |
| |
| /* Make sure that we got at least the API version number */ |
| if (ucode_raw->size < 4) { |
| IWL_ERR(nic, "File size way too small!\n"); |
| goto try_again; |
| } |
| |
| /* Data from ucode file: header followed by uCode images */ |
| ucode = (struct iwl_ucode_header *)ucode_raw->data; |
| |
| if (ucode->ver) |
| err = iwl_parse_v1_v2_firmware(nic, ucode_raw, &pieces); |
| else |
| err = iwl_parse_tlv_firmware(nic, ucode_raw, &pieces, |
| &fw->ucode_capa); |
| |
| if (err) |
| goto try_again; |
| |
| api_ver = IWL_UCODE_API(nic->fw.ucode_ver); |
| |
| /* |
| * api_ver should match the api version forming part of the |
| * firmware filename ... but we don't check for that and only rely |
| * on the API version read from firmware header from here on forward |
| */ |
| /* no api version check required for experimental uCode */ |
| if (nic->fw_index != UCODE_EXPERIMENTAL_INDEX) { |
| if (api_ver < api_min || api_ver > api_max) { |
| IWL_ERR(nic, |
| "Driver unable to support your firmware API. " |
| "Driver supports v%u, firmware is v%u.\n", |
| api_max, api_ver); |
| goto try_again; |
| } |
| |
| if (api_ver < api_ok) { |
| if (api_ok != api_max) |
| IWL_ERR(nic, "Firmware has old API version, " |
| "expected v%u through v%u, got v%u.\n", |
| api_ok, api_max, api_ver); |
| else |
| IWL_ERR(nic, "Firmware has old API version, " |
| "expected v%u, got v%u.\n", |
| api_max, api_ver); |
| IWL_ERR(nic, "New firmware can be obtained from " |
| "http://www.intellinuxwireless.org/.\n"); |
| } |
| } |
| |
| IWL_INFO(nic, "loaded firmware version %s", nic->fw.fw_version); |
| |
| /* |
| * For any of the failures below (before allocating pci memory) |
| * we will try to load a version with a smaller API -- maybe the |
| * user just got a corrupted version of the latest API. |
| */ |
| |
| IWL_DEBUG_INFO(nic, "f/w package hdr ucode version raw = 0x%x\n", |
| nic->fw.ucode_ver); |
| IWL_DEBUG_INFO(nic, "f/w package hdr runtime inst size = %Zd\n", |
| pieces.inst_size); |
| IWL_DEBUG_INFO(nic, "f/w package hdr runtime data size = %Zd\n", |
| pieces.data_size); |
| IWL_DEBUG_INFO(nic, "f/w package hdr init inst size = %Zd\n", |
| pieces.init_size); |
| IWL_DEBUG_INFO(nic, "f/w package hdr init data size = %Zd\n", |
| pieces.init_data_size); |
| |
| /* Verify that uCode images will fit in card's SRAM */ |
| if (pieces.inst_size > cfg->max_inst_size) { |
| IWL_ERR(nic, "uCode instr len %Zd too large to fit in\n", |
| pieces.inst_size); |
| goto try_again; |
| } |
| |
| if (pieces.data_size > cfg->max_data_size) { |
| IWL_ERR(nic, "uCode data len %Zd too large to fit in\n", |
| pieces.data_size); |
| goto try_again; |
| } |
| |
| if (pieces.init_size > cfg->max_inst_size) { |
| IWL_ERR(nic, "uCode init instr len %Zd too large to fit in\n", |
| pieces.init_size); |
| goto try_again; |
| } |
| |
| if (pieces.init_data_size > cfg->max_data_size) { |
| IWL_ERR(nic, "uCode init data len %Zd too large to fit in\n", |
| pieces.init_data_size); |
| goto try_again; |
| } |
| |
| /* Allocate ucode buffers for card's bus-master loading ... */ |
| |
| /* Runtime instructions and 2 copies of data: |
| * 1) unmodified from disk |
| * 2) backup cache for save/restore during power-downs */ |
| if (iwl_alloc_fw_desc(nic, &nic->fw.ucode_rt.code, |
| pieces.inst, pieces.inst_size)) |
| goto err_pci_alloc; |
| if (iwl_alloc_fw_desc(nic, &nic->fw.ucode_rt.data, |
| pieces.data, pieces.data_size)) |
| goto err_pci_alloc; |
| |
| /* Initialization instructions and data */ |
| if (pieces.init_size && pieces.init_data_size) { |
| if (iwl_alloc_fw_desc(nic, |
| &nic->fw.ucode_init.code, |
| pieces.init, pieces.init_size)) |
| goto err_pci_alloc; |
| if (iwl_alloc_fw_desc(nic, |
| &nic->fw.ucode_init.data, |
| pieces.init_data, pieces.init_data_size)) |
| goto err_pci_alloc; |
| } |
| |
| /* WoWLAN instructions and data */ |
| if (pieces.wowlan_inst_size && pieces.wowlan_data_size) { |
| if (iwl_alloc_fw_desc(nic, |
| &nic->fw.ucode_wowlan.code, |
| pieces.wowlan_inst, |
| pieces.wowlan_inst_size)) |
| goto err_pci_alloc; |
| if (iwl_alloc_fw_desc(nic, |
| &nic->fw.ucode_wowlan.data, |
| pieces.wowlan_data, |
| pieces.wowlan_data_size)) |
| goto err_pci_alloc; |
| } |
| |
| /* Now that we can no longer fail, copy information */ |
| |
| /* |
| * The (size - 16) / 12 formula is based on the information recorded |
| * for each event, which is of mode 1 (including timestamp) for all |
| * new microcodes that include this information. |
| */ |
| nic->init_evtlog_ptr = pieces.init_evtlog_ptr; |
| if (pieces.init_evtlog_size) |
| nic->init_evtlog_size = (pieces.init_evtlog_size - 16)/12; |
| else |
| nic->init_evtlog_size = |
| cfg->base_params->max_event_log_size; |
| nic->init_errlog_ptr = pieces.init_errlog_ptr; |
| nic->inst_evtlog_ptr = pieces.inst_evtlog_ptr; |
| if (pieces.inst_evtlog_size) |
| nic->inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12; |
| else |
| nic->inst_evtlog_size = |
| cfg->base_params->max_event_log_size; |
| nic->inst_errlog_ptr = pieces.inst_errlog_ptr; |
| |
| /* |
| * figure out the offset of chain noise reset and gain commands |
| * base on the size of standard phy calibration commands table size |
| */ |
| if (fw->ucode_capa.standard_phy_calibration_size > |
| IWL_MAX_PHY_CALIBRATE_TBL_SIZE) |
| fw->ucode_capa.standard_phy_calibration_size = |
| IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; |
| |
| /* We have our copies now, allow OS release its copies */ |
| release_firmware(ucode_raw); |
| complete(&nic->request_firmware_complete); |
| |
| nic->op_mode = iwl_dvm_ops.start(nic->shrd->trans); |
| |
| if (!nic->op_mode) |
| goto out_unbind; |
| |
| return; |
| |
| try_again: |
| /* try next, if any */ |
| release_firmware(ucode_raw); |
| if (iwl_request_firmware(nic, false)) |
| goto out_unbind; |
| return; |
| |
| err_pci_alloc: |
| IWL_ERR(nic, "failed to allocate pci memory\n"); |
| iwl_dealloc_ucode(nic); |
| release_firmware(ucode_raw); |
| out_unbind: |
| complete(&nic->request_firmware_complete); |
| device_release_driver(trans(nic)->dev); |
| } |
| |