| /* |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _SCIC_SDS_USER_PARAMETERS_H_ |
| #define _SCIC_SDS_USER_PARAMETERS_H_ |
| |
| /** |
| * This file contains all of the structure definitions and interface methods |
| * that can be called by a SCIC user on the SCU Driver Standard |
| * (struct scic_sds_user_parameters) user parameter block. |
| * |
| * |
| */ |
| |
| |
| #include "sci_status.h" |
| #include "intel_sas.h" |
| #include "sci_controller_constants.h" |
| #include "probe_roms.h" |
| |
| struct scic_sds_controller; |
| |
| /** |
| * |
| * |
| * SCIC_SDS_PARM_PHY_SPEED These constants define the speeds utilized for a |
| * phy/port. |
| */ |
| #define SCIC_SDS_PARM_NO_SPEED 0 |
| |
| /** |
| * |
| * |
| * This value of 1 indicates generation 1 (i.e. 1.5 Gb/s). |
| */ |
| #define SCIC_SDS_PARM_GEN1_SPEED 1 |
| |
| /** |
| * |
| * |
| * This value of 2 indicates generation 2 (i.e. 3.0 Gb/s). |
| */ |
| #define SCIC_SDS_PARM_GEN2_SPEED 2 |
| |
| /** |
| * |
| * |
| * This value of 3 indicates generation 3 (i.e. 6.0 Gb/s). |
| */ |
| #define SCIC_SDS_PARM_GEN3_SPEED 3 |
| |
| /** |
| * |
| * |
| * For range checks, the max speed generation |
| */ |
| #define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED |
| |
| /** |
| * struct scic_sds_user_parameters - This structure delineates the various user |
| * parameters that can be changed by the core user. |
| * |
| * |
| */ |
| struct scic_sds_user_parameters { |
| struct sci_phy_user_params { |
| /** |
| * This field specifies the NOTIFY (ENABLE SPIN UP) primitive |
| * insertion frequency for this phy index. |
| */ |
| u32 notify_enable_spin_up_insertion_frequency; |
| |
| /** |
| * This method specifies the number of transmitted DWORDs within which |
| * to transmit a single ALIGN primitive. This value applies regardless |
| * of what type of device is attached or connection state. A value of |
| * 0 indicates that no ALIGN primitives will be inserted. |
| */ |
| u16 align_insertion_frequency; |
| |
| /** |
| * This method specifies the number of transmitted DWORDs within which |
| * to transmit 2 ALIGN primitives. This applies for SAS connections |
| * only. A minimum value of 3 is required for this field. |
| */ |
| u16 in_connection_align_insertion_frequency; |
| |
| /** |
| * This field indicates the maximum speed generation to be utilized |
| * by phys in the supplied port. |
| * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). |
| * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). |
| * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). |
| */ |
| u8 max_speed_generation; |
| |
| } phys[SCI_MAX_PHYS]; |
| |
| /** |
| * This field specifies the maximum number of direct attached devices |
| * that can have power supplied to them simultaneously. |
| */ |
| u8 max_number_concurrent_device_spin_up; |
| |
| /** |
| * This field specifies the number of seconds to allow a phy to consume |
| * power before yielding to another phy. |
| * |
| */ |
| u8 phy_spin_up_delay_interval; |
| |
| /** |
| * These timer values specifies how long a link will remain open with no |
| * activity in increments of a microsecond, it can be in increments of |
| * 100 microseconds if the upper most bit is set. |
| * |
| */ |
| u16 stp_inactivity_timeout; |
| u16 ssp_inactivity_timeout; |
| |
| /** |
| * These timer values specifies how long a link will remain open in increments |
| * of 100 microseconds. |
| * |
| */ |
| u16 stp_max_occupancy_timeout; |
| u16 ssp_max_occupancy_timeout; |
| |
| /** |
| * This timer value specifies how long a link will remain open with no |
| * outbound traffic in increments of a microsecond. |
| * |
| */ |
| u8 no_outbound_task_timeout; |
| |
| }; |
| |
| /** |
| * This structure/union specifies the various different user parameter sets |
| * available. Each type is specific to a hardware controller version. |
| * |
| * union scic_user_parameters |
| */ |
| union scic_user_parameters { |
| /** |
| * This field specifies the user parameters specific to the |
| * Storage Controller Unit (SCU) Driver Standard (SDS) version |
| * 1. |
| */ |
| struct scic_sds_user_parameters sds1; |
| |
| }; |
| |
| |
| /** |
| * |
| * |
| * SCIC_SDS_OEM_PHY_MASK These constants define the valid values for phy_mask |
| */ |
| |
| /** |
| * |
| * |
| * This is the min value assignable to a port's phy mask |
| */ |
| #define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 |
| |
| /** |
| * |
| * |
| * This is the max value assignable to a port's phy mask |
| */ |
| #define SCIC_SDS_PARM_PHY_MASK_MAX 0xF |
| |
| #define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 |
| |
| /** |
| * This structure/union specifies the various different OEM parameter sets |
| * available. Each type is specific to a hardware controller version. |
| * |
| * union scic_oem_parameters |
| */ |
| union scic_oem_parameters { |
| /** |
| * This field specifies the OEM parameters specific to the |
| * Storage Controller Unit (SCU) Driver Standard (SDS) version |
| * 1. |
| */ |
| struct scic_sds_oem_params sds1; |
| }; |
| |
| /** |
| * scic_user_parameters_set() - This method allows the user to attempt to |
| * change the user parameters utilized by the controller. |
| * @controller: This parameter specifies the controller on which to set the |
| * user parameters. |
| * @user_parameters: This parameter specifies the USER_PARAMETERS object |
| * containing the potential new values. |
| * |
| * Indicate if the update of the user parameters was successful. SCI_SUCCESS |
| * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE |
| * This value is returned if the attempt to change the user parameter failed, |
| * because changing one of the parameters is not currently allowed. |
| * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user |
| * supplied an invalid interrupt coalescence time, spin up delay interval, etc. |
| */ |
| enum sci_status scic_user_parameters_set( |
| struct scic_sds_controller *controller, |
| union scic_user_parameters *user_parameters); |
| |
| /** |
| * scic_user_parameters_get() - This method allows the user to retrieve the |
| * user parameters utilized by the controller. |
| * @controller: This parameter specifies the controller on which to set the |
| * user parameters. |
| * @user_parameters: This parameter specifies the USER_PARAMETERS object into |
| * which the framework shall save it's parameters. |
| * |
| */ |
| void scic_user_parameters_get( |
| struct scic_sds_controller *controller, |
| union scic_user_parameters *user_parameters); |
| |
| /** |
| * scic_oem_parameters_set() - This method allows the user to attempt to change |
| * the OEM parameters utilized by the controller. |
| * @controller: This parameter specifies the controller on which to set the |
| * user parameters. |
| * @oem_parameters: This parameter specifies the OEM parameters object |
| * containing the potential new values. |
| * |
| * Indicate if the update of the user parameters was successful. SCI_SUCCESS |
| * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE |
| * This value is returned if the attempt to change the user parameter failed, |
| * because changing one of the parameters is not currently allowed. |
| * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user |
| * supplied an unsupported value for one of the OEM parameters. |
| */ |
| enum sci_status scic_oem_parameters_set( |
| struct scic_sds_controller *controller, |
| union scic_oem_parameters *oem_parameters); |
| |
| /** |
| * scic_oem_parameters_get() - This method allows the user to retreive the OEM |
| * parameters utilized by the controller. |
| * @controller: This parameter specifies the controller on which to set the |
| * user parameters. |
| * @oem_parameters: This parameter specifies the OEM parameters object in which |
| * to write the core's OEM parameters. |
| * |
| */ |
| void scic_oem_parameters_get( |
| struct scic_sds_controller *controller, |
| union scic_oem_parameters *oem_parameters); |
| |
| |
| #endif /* _SCIC_SDS_USER_PARAMETERS_H_ */ |
| |