| /* |
| * drivers/cpufreq/cpufreq_ondemand.c |
| * |
| * Copyright (C) 2001 Russell King |
| * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. |
| * Jun Nakajima <jun.nakajima@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/cpu.h> |
| #include <linux/percpu-defs.h> |
| #include <linux/slab.h> |
| #include <linux/tick.h> |
| #include <linux/sched/cpufreq.h> |
| |
| #include "cpufreq_ondemand.h" |
| |
| /* On-demand governor macros */ |
| #define DEF_FREQUENCY_UP_THRESHOLD (80) |
| #define DEF_SAMPLING_DOWN_FACTOR (1) |
| #define MAX_SAMPLING_DOWN_FACTOR (100000) |
| #define MICRO_FREQUENCY_UP_THRESHOLD (95) |
| #define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) |
| #define MIN_FREQUENCY_UP_THRESHOLD (1) |
| #define MAX_FREQUENCY_UP_THRESHOLD (100) |
| |
| static struct od_ops od_ops; |
| |
| static unsigned int default_powersave_bias; |
| |
| /* |
| * Not all CPUs want IO time to be accounted as busy; this depends on how |
| * efficient idling at a higher frequency/voltage is. |
| * Pavel Machek says this is not so for various generations of AMD and old |
| * Intel systems. |
| * Mike Chan (android.com) claims this is also not true for ARM. |
| * Because of this, whitelist specific known (series) of CPUs by default, and |
| * leave all others up to the user. |
| */ |
| static int should_io_be_busy(void) |
| { |
| #if defined(CONFIG_X86) |
| /* |
| * For Intel, Core 2 (model 15) and later have an efficient idle. |
| */ |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && |
| boot_cpu_data.x86 == 6 && |
| boot_cpu_data.x86_model >= 15) |
| return 1; |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Find right freq to be set now with powersave_bias on. |
| * Returns the freq_hi to be used right now and will set freq_hi_delay_us, |
| * freq_lo, and freq_lo_delay_us in percpu area for averaging freqs. |
| */ |
| static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy, |
| unsigned int freq_next, unsigned int relation) |
| { |
| unsigned int freq_req, freq_reduc, freq_avg; |
| unsigned int freq_hi, freq_lo; |
| unsigned int index; |
| unsigned int delay_hi_us; |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; |
| struct cpufreq_frequency_table *freq_table = policy->freq_table; |
| |
| if (!freq_table) { |
| dbs_info->freq_lo = 0; |
| dbs_info->freq_lo_delay_us = 0; |
| return freq_next; |
| } |
| |
| index = cpufreq_frequency_table_target(policy, freq_next, relation); |
| freq_req = freq_table[index].frequency; |
| freq_reduc = freq_req * od_tuners->powersave_bias / 1000; |
| freq_avg = freq_req - freq_reduc; |
| |
| /* Find freq bounds for freq_avg in freq_table */ |
| index = cpufreq_table_find_index_h(policy, freq_avg); |
| freq_lo = freq_table[index].frequency; |
| index = cpufreq_table_find_index_l(policy, freq_avg); |
| freq_hi = freq_table[index].frequency; |
| |
| /* Find out how long we have to be in hi and lo freqs */ |
| if (freq_hi == freq_lo) { |
| dbs_info->freq_lo = 0; |
| dbs_info->freq_lo_delay_us = 0; |
| return freq_lo; |
| } |
| delay_hi_us = (freq_avg - freq_lo) * dbs_data->sampling_rate; |
| delay_hi_us += (freq_hi - freq_lo) / 2; |
| delay_hi_us /= freq_hi - freq_lo; |
| dbs_info->freq_hi_delay_us = delay_hi_us; |
| dbs_info->freq_lo = freq_lo; |
| dbs_info->freq_lo_delay_us = dbs_data->sampling_rate - delay_hi_us; |
| return freq_hi; |
| } |
| |
| static void ondemand_powersave_bias_init(struct cpufreq_policy *policy) |
| { |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); |
| |
| dbs_info->freq_lo = 0; |
| } |
| |
| static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq) |
| { |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; |
| |
| if (od_tuners->powersave_bias) |
| freq = od_ops.powersave_bias_target(policy, freq, |
| CPUFREQ_RELATION_H); |
| else if (policy->cur == policy->max) |
| return; |
| |
| __cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ? |
| CPUFREQ_RELATION_L : CPUFREQ_RELATION_H); |
| } |
| |
| /* |
| * Every sampling_rate, we check, if current idle time is less than 20% |
| * (default), then we try to increase frequency. Else, we adjust the frequency |
| * proportional to load. |
| */ |
| static void od_update(struct cpufreq_policy *policy) |
| { |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; |
| unsigned int load = dbs_update(policy); |
| |
| dbs_info->freq_lo = 0; |
| |
| /* Check for frequency increase */ |
| if (load > dbs_data->up_threshold) { |
| /* If switching to max speed, apply sampling_down_factor */ |
| if (policy->cur < policy->max) |
| policy_dbs->rate_mult = dbs_data->sampling_down_factor; |
| dbs_freq_increase(policy, policy->max); |
| } else { |
| /* Calculate the next frequency proportional to load */ |
| unsigned int freq_next, min_f, max_f; |
| |
| min_f = policy->cpuinfo.min_freq; |
| max_f = policy->cpuinfo.max_freq; |
| freq_next = min_f + load * (max_f - min_f) / 100; |
| |
| /* No longer fully busy, reset rate_mult */ |
| policy_dbs->rate_mult = 1; |
| |
| if (od_tuners->powersave_bias) |
| freq_next = od_ops.powersave_bias_target(policy, |
| freq_next, |
| CPUFREQ_RELATION_L); |
| |
| __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_C); |
| } |
| } |
| |
| static unsigned int od_dbs_update(struct cpufreq_policy *policy) |
| { |
| struct policy_dbs_info *policy_dbs = policy->governor_data; |
| struct dbs_data *dbs_data = policy_dbs->dbs_data; |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); |
| int sample_type = dbs_info->sample_type; |
| |
| /* Common NORMAL_SAMPLE setup */ |
| dbs_info->sample_type = OD_NORMAL_SAMPLE; |
| /* |
| * OD_SUB_SAMPLE doesn't make sense if sample_delay_ns is 0, so ignore |
| * it then. |
| */ |
| if (sample_type == OD_SUB_SAMPLE && policy_dbs->sample_delay_ns > 0) { |
| __cpufreq_driver_target(policy, dbs_info->freq_lo, |
| CPUFREQ_RELATION_H); |
| return dbs_info->freq_lo_delay_us; |
| } |
| |
| od_update(policy); |
| |
| if (dbs_info->freq_lo) { |
| /* Setup SUB_SAMPLE */ |
| dbs_info->sample_type = OD_SUB_SAMPLE; |
| return dbs_info->freq_hi_delay_us; |
| } |
| |
| return dbs_data->sampling_rate * policy_dbs->rate_mult; |
| } |
| |
| /************************** sysfs interface ************************/ |
| static struct dbs_governor od_dbs_gov; |
| |
| static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf, |
| size_t count) |
| { |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); |
| unsigned int input; |
| int ret; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| dbs_data->io_is_busy = !!input; |
| |
| /* we need to re-evaluate prev_cpu_idle */ |
| gov_update_cpu_data(dbs_data); |
| |
| return count; |
| } |
| |
| static ssize_t store_up_threshold(struct gov_attr_set *attr_set, |
| const char *buf, size_t count) |
| { |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); |
| unsigned int input; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| |
| if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || |
| input < MIN_FREQUENCY_UP_THRESHOLD) { |
| return -EINVAL; |
| } |
| |
| dbs_data->up_threshold = input; |
| return count; |
| } |
| |
| static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set, |
| const char *buf, size_t count) |
| { |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); |
| struct policy_dbs_info *policy_dbs; |
| unsigned int input; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| |
| if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) |
| return -EINVAL; |
| |
| dbs_data->sampling_down_factor = input; |
| |
| /* Reset down sampling multiplier in case it was active */ |
| list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { |
| /* |
| * Doing this without locking might lead to using different |
| * rate_mult values in od_update() and od_dbs_update(). |
| */ |
| mutex_lock(&policy_dbs->update_mutex); |
| policy_dbs->rate_mult = 1; |
| mutex_unlock(&policy_dbs->update_mutex); |
| } |
| |
| return count; |
| } |
| |
| static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set, |
| const char *buf, size_t count) |
| { |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); |
| unsigned int input; |
| int ret; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| |
| if (input > 1) |
| input = 1; |
| |
| if (input == dbs_data->ignore_nice_load) { /* nothing to do */ |
| return count; |
| } |
| dbs_data->ignore_nice_load = input; |
| |
| /* we need to re-evaluate prev_cpu_idle */ |
| gov_update_cpu_data(dbs_data); |
| |
| return count; |
| } |
| |
| static ssize_t store_powersave_bias(struct gov_attr_set *attr_set, |
| const char *buf, size_t count) |
| { |
| struct dbs_data *dbs_data = to_dbs_data(attr_set); |
| struct od_dbs_tuners *od_tuners = dbs_data->tuners; |
| struct policy_dbs_info *policy_dbs; |
| unsigned int input; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| |
| if (ret != 1) |
| return -EINVAL; |
| |
| if (input > 1000) |
| input = 1000; |
| |
| od_tuners->powersave_bias = input; |
| |
| list_for_each_entry(policy_dbs, &attr_set->policy_list, list) |
| ondemand_powersave_bias_init(policy_dbs->policy); |
| |
| return count; |
| } |
| |
| gov_show_one_common(sampling_rate); |
| gov_show_one_common(up_threshold); |
| gov_show_one_common(sampling_down_factor); |
| gov_show_one_common(ignore_nice_load); |
| gov_show_one_common(min_sampling_rate); |
| gov_show_one_common(io_is_busy); |
| gov_show_one(od, powersave_bias); |
| |
| gov_attr_rw(sampling_rate); |
| gov_attr_rw(io_is_busy); |
| gov_attr_rw(up_threshold); |
| gov_attr_rw(sampling_down_factor); |
| gov_attr_rw(ignore_nice_load); |
| gov_attr_rw(powersave_bias); |
| gov_attr_ro(min_sampling_rate); |
| |
| static struct attribute *od_attributes[] = { |
| &min_sampling_rate.attr, |
| &sampling_rate.attr, |
| &up_threshold.attr, |
| &sampling_down_factor.attr, |
| &ignore_nice_load.attr, |
| &powersave_bias.attr, |
| &io_is_busy.attr, |
| NULL |
| }; |
| |
| /************************** sysfs end ************************/ |
| |
| static struct policy_dbs_info *od_alloc(void) |
| { |
| struct od_policy_dbs_info *dbs_info; |
| |
| dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL); |
| return dbs_info ? &dbs_info->policy_dbs : NULL; |
| } |
| |
| static void od_free(struct policy_dbs_info *policy_dbs) |
| { |
| kfree(to_dbs_info(policy_dbs)); |
| } |
| |
| static int od_init(struct dbs_data *dbs_data) |
| { |
| struct od_dbs_tuners *tuners; |
| u64 idle_time; |
| int cpu; |
| |
| tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); |
| if (!tuners) |
| return -ENOMEM; |
| |
| cpu = get_cpu(); |
| idle_time = get_cpu_idle_time_us(cpu, NULL); |
| put_cpu(); |
| if (idle_time != -1ULL) { |
| /* Idle micro accounting is supported. Use finer thresholds */ |
| dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; |
| /* |
| * In nohz/micro accounting case we set the minimum frequency |
| * not depending on HZ, but fixed (very low). |
| */ |
| dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE; |
| } else { |
| dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; |
| |
| /* For correct statistics, we need 10 ticks for each measure */ |
| dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO * |
| jiffies_to_usecs(10); |
| } |
| |
| dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; |
| dbs_data->ignore_nice_load = 0; |
| tuners->powersave_bias = default_powersave_bias; |
| dbs_data->io_is_busy = should_io_be_busy(); |
| |
| dbs_data->tuners = tuners; |
| return 0; |
| } |
| |
| static void od_exit(struct dbs_data *dbs_data) |
| { |
| kfree(dbs_data->tuners); |
| } |
| |
| static void od_start(struct cpufreq_policy *policy) |
| { |
| struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); |
| |
| dbs_info->sample_type = OD_NORMAL_SAMPLE; |
| ondemand_powersave_bias_init(policy); |
| } |
| |
| static struct od_ops od_ops = { |
| .powersave_bias_target = generic_powersave_bias_target, |
| }; |
| |
| static struct dbs_governor od_dbs_gov = { |
| .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"), |
| .kobj_type = { .default_attrs = od_attributes }, |
| .gov_dbs_update = od_dbs_update, |
| .alloc = od_alloc, |
| .free = od_free, |
| .init = od_init, |
| .exit = od_exit, |
| .start = od_start, |
| }; |
| |
| #define CPU_FREQ_GOV_ONDEMAND (&od_dbs_gov.gov) |
| |
| static void od_set_powersave_bias(unsigned int powersave_bias) |
| { |
| unsigned int cpu; |
| cpumask_t done; |
| |
| default_powersave_bias = powersave_bias; |
| cpumask_clear(&done); |
| |
| get_online_cpus(); |
| for_each_online_cpu(cpu) { |
| struct cpufreq_policy *policy; |
| struct policy_dbs_info *policy_dbs; |
| struct dbs_data *dbs_data; |
| struct od_dbs_tuners *od_tuners; |
| |
| if (cpumask_test_cpu(cpu, &done)) |
| continue; |
| |
| policy = cpufreq_cpu_get_raw(cpu); |
| if (!policy || policy->governor != CPU_FREQ_GOV_ONDEMAND) |
| continue; |
| |
| policy_dbs = policy->governor_data; |
| if (!policy_dbs) |
| continue; |
| |
| cpumask_or(&done, &done, policy->cpus); |
| |
| dbs_data = policy_dbs->dbs_data; |
| od_tuners = dbs_data->tuners; |
| od_tuners->powersave_bias = default_powersave_bias; |
| } |
| put_online_cpus(); |
| } |
| |
| void od_register_powersave_bias_handler(unsigned int (*f) |
| (struct cpufreq_policy *, unsigned int, unsigned int), |
| unsigned int powersave_bias) |
| { |
| od_ops.powersave_bias_target = f; |
| od_set_powersave_bias(powersave_bias); |
| } |
| EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler); |
| |
| void od_unregister_powersave_bias_handler(void) |
| { |
| od_ops.powersave_bias_target = generic_powersave_bias_target; |
| od_set_powersave_bias(0); |
| } |
| EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler); |
| |
| static int __init cpufreq_gov_dbs_init(void) |
| { |
| return cpufreq_register_governor(CPU_FREQ_GOV_ONDEMAND); |
| } |
| |
| static void __exit cpufreq_gov_dbs_exit(void) |
| { |
| cpufreq_unregister_governor(CPU_FREQ_GOV_ONDEMAND); |
| } |
| |
| MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); |
| MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); |
| MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " |
| "Low Latency Frequency Transition capable processors"); |
| MODULE_LICENSE("GPL"); |
| |
| #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND |
| struct cpufreq_governor *cpufreq_default_governor(void) |
| { |
| return CPU_FREQ_GOV_ONDEMAND; |
| } |
| |
| fs_initcall(cpufreq_gov_dbs_init); |
| #else |
| module_init(cpufreq_gov_dbs_init); |
| #endif |
| module_exit(cpufreq_gov_dbs_exit); |