| /* |
| * clk-flexgen.c |
| * |
| * Copyright (C) ST-Microelectronics SA 2013 |
| * Author: Maxime Coquelin <maxime.coquelin@st.com> for ST-Microelectronics. |
| * License terms: GNU General Public License (GPL), version 2 */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/string.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| struct flexgen { |
| struct clk_hw hw; |
| |
| /* Crossbar */ |
| struct clk_mux mux; |
| /* Pre-divisor's gate */ |
| struct clk_gate pgate; |
| /* Pre-divisor */ |
| struct clk_divider pdiv; |
| /* Final divisor's gate */ |
| struct clk_gate fgate; |
| /* Final divisor */ |
| struct clk_divider fdiv; |
| }; |
| |
| #define to_flexgen(_hw) container_of(_hw, struct flexgen, hw) |
| |
| static int flexgen_enable(struct clk_hw *hw) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *pgate_hw = &flexgen->pgate.hw; |
| struct clk_hw *fgate_hw = &flexgen->fgate.hw; |
| |
| __clk_hw_set_clk(pgate_hw, hw); |
| __clk_hw_set_clk(fgate_hw, hw); |
| |
| clk_gate_ops.enable(pgate_hw); |
| |
| clk_gate_ops.enable(fgate_hw); |
| |
| pr_debug("%s: flexgen output enabled\n", __clk_get_name(hw->clk)); |
| return 0; |
| } |
| |
| static void flexgen_disable(struct clk_hw *hw) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *fgate_hw = &flexgen->fgate.hw; |
| |
| /* disable only the final gate */ |
| __clk_hw_set_clk(fgate_hw, hw); |
| |
| clk_gate_ops.disable(fgate_hw); |
| |
| pr_debug("%s: flexgen output disabled\n", __clk_get_name(hw->clk)); |
| } |
| |
| static int flexgen_is_enabled(struct clk_hw *hw) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *fgate_hw = &flexgen->fgate.hw; |
| |
| __clk_hw_set_clk(fgate_hw, hw); |
| |
| if (!clk_gate_ops.is_enabled(fgate_hw)) |
| return 0; |
| |
| return 1; |
| } |
| |
| static u8 flexgen_get_parent(struct clk_hw *hw) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *mux_hw = &flexgen->mux.hw; |
| |
| __clk_hw_set_clk(mux_hw, hw); |
| |
| return clk_mux_ops.get_parent(mux_hw); |
| } |
| |
| static int flexgen_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *mux_hw = &flexgen->mux.hw; |
| |
| __clk_hw_set_clk(mux_hw, hw); |
| |
| return clk_mux_ops.set_parent(mux_hw, index); |
| } |
| |
| static inline unsigned long |
| clk_best_div(unsigned long parent_rate, unsigned long rate) |
| { |
| return parent_rate / rate + ((rate > (2*(parent_rate % rate))) ? 0 : 1); |
| } |
| |
| static long flexgen_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| unsigned long div; |
| |
| /* Round div according to exact prate and wished rate */ |
| div = clk_best_div(*prate, rate); |
| |
| if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) { |
| *prate = rate * div; |
| return rate; |
| } |
| |
| return *prate / div; |
| } |
| |
| static unsigned long flexgen_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *pdiv_hw = &flexgen->pdiv.hw; |
| struct clk_hw *fdiv_hw = &flexgen->fdiv.hw; |
| unsigned long mid_rate; |
| |
| __clk_hw_set_clk(pdiv_hw, hw); |
| __clk_hw_set_clk(fdiv_hw, hw); |
| |
| mid_rate = clk_divider_ops.recalc_rate(pdiv_hw, parent_rate); |
| |
| return clk_divider_ops.recalc_rate(fdiv_hw, mid_rate); |
| } |
| |
| static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct flexgen *flexgen = to_flexgen(hw); |
| struct clk_hw *pdiv_hw = &flexgen->pdiv.hw; |
| struct clk_hw *fdiv_hw = &flexgen->fdiv.hw; |
| unsigned long div = 0; |
| int ret = 0; |
| |
| __clk_hw_set_clk(pdiv_hw, hw); |
| __clk_hw_set_clk(fdiv_hw, hw); |
| |
| div = clk_best_div(parent_rate, rate); |
| |
| /* |
| * pdiv is mainly targeted for low freq results, while fdiv |
| * should be used for div <= 64. The other way round can |
| * lead to 'duty cycle' issues. |
| */ |
| |
| if (div <= 64) { |
| clk_divider_ops.set_rate(pdiv_hw, parent_rate, parent_rate); |
| ret = clk_divider_ops.set_rate(fdiv_hw, rate, rate * div); |
| } else { |
| clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate); |
| ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * div); |
| } |
| |
| return ret; |
| } |
| |
| static const struct clk_ops flexgen_ops = { |
| .enable = flexgen_enable, |
| .disable = flexgen_disable, |
| .is_enabled = flexgen_is_enabled, |
| .get_parent = flexgen_get_parent, |
| .set_parent = flexgen_set_parent, |
| .round_rate = flexgen_round_rate, |
| .recalc_rate = flexgen_recalc_rate, |
| .set_rate = flexgen_set_rate, |
| }; |
| |
| static struct clk *clk_register_flexgen(const char *name, |
| const char **parent_names, u8 num_parents, |
| void __iomem *reg, spinlock_t *lock, u32 idx, |
| unsigned long flexgen_flags) { |
| struct flexgen *fgxbar; |
| struct clk *clk; |
| struct clk_init_data init; |
| u32 xbar_shift; |
| void __iomem *xbar_reg, *fdiv_reg; |
| |
| fgxbar = kzalloc(sizeof(struct flexgen), GFP_KERNEL); |
| if (!fgxbar) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &flexgen_ops; |
| init.flags = CLK_IS_BASIC | flexgen_flags; |
| init.parent_names = parent_names; |
| init.num_parents = num_parents; |
| |
| xbar_reg = reg + 0x18 + (idx & ~0x3); |
| xbar_shift = (idx % 4) * 0x8; |
| fdiv_reg = reg + 0x164 + idx * 4; |
| |
| /* Crossbar element config */ |
| fgxbar->mux.lock = lock; |
| fgxbar->mux.mask = BIT(6) - 1; |
| fgxbar->mux.reg = xbar_reg; |
| fgxbar->mux.shift = xbar_shift; |
| fgxbar->mux.table = NULL; |
| |
| |
| /* Pre-divider's gate config (in xbar register)*/ |
| fgxbar->pgate.lock = lock; |
| fgxbar->pgate.reg = xbar_reg; |
| fgxbar->pgate.bit_idx = xbar_shift + 6; |
| |
| /* Pre-divider config */ |
| fgxbar->pdiv.lock = lock; |
| fgxbar->pdiv.reg = reg + 0x58 + idx * 4; |
| fgxbar->pdiv.width = 10; |
| |
| /* Final divider's gate config */ |
| fgxbar->fgate.lock = lock; |
| fgxbar->fgate.reg = fdiv_reg; |
| fgxbar->fgate.bit_idx = 6; |
| |
| /* Final divider config */ |
| fgxbar->fdiv.lock = lock; |
| fgxbar->fdiv.reg = fdiv_reg; |
| fgxbar->fdiv.width = 6; |
| |
| fgxbar->hw.init = &init; |
| |
| clk = clk_register(NULL, &fgxbar->hw); |
| if (IS_ERR(clk)) |
| kfree(fgxbar); |
| else |
| pr_debug("%s: parent %s rate %u\n", |
| __clk_get_name(clk), |
| __clk_get_name(clk_get_parent(clk)), |
| (unsigned int)clk_get_rate(clk)); |
| return clk; |
| } |
| |
| static const char ** __init flexgen_get_parents(struct device_node *np, |
| int *num_parents) |
| { |
| const char **parents; |
| int nparents, i; |
| |
| nparents = of_clk_get_parent_count(np); |
| if (WARN_ON(nparents <= 0)) |
| return NULL; |
| |
| parents = kcalloc(nparents, sizeof(const char *), GFP_KERNEL); |
| if (!parents) |
| return NULL; |
| |
| for (i = 0; i < nparents; i++) |
| parents[i] = of_clk_get_parent_name(np, i); |
| |
| *num_parents = nparents; |
| return parents; |
| } |
| |
| static void __init st_of_flexgen_setup(struct device_node *np) |
| { |
| struct device_node *pnode; |
| void __iomem *reg; |
| struct clk_onecell_data *clk_data; |
| const char **parents; |
| int num_parents, i; |
| spinlock_t *rlock = NULL; |
| unsigned long flex_flags = 0; |
| |
| pnode = of_get_parent(np); |
| if (!pnode) |
| return; |
| |
| reg = of_iomap(pnode, 0); |
| if (!reg) |
| return; |
| |
| parents = flexgen_get_parents(np, &num_parents); |
| if (!parents) |
| return; |
| |
| clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); |
| if (!clk_data) |
| goto err; |
| |
| clk_data->clk_num = of_property_count_strings(np , |
| "clock-output-names"); |
| if (clk_data->clk_num <= 0) { |
| pr_err("%s: Failed to get number of output clocks (%d)", |
| __func__, clk_data->clk_num); |
| goto err; |
| } |
| |
| clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *), |
| GFP_KERNEL); |
| if (!clk_data->clks) |
| goto err; |
| |
| rlock = kzalloc(sizeof(spinlock_t), GFP_KERNEL); |
| if (!rlock) |
| goto err; |
| |
| for (i = 0; i < clk_data->clk_num; i++) { |
| struct clk *clk; |
| const char *clk_name; |
| |
| if (of_property_read_string_index(np, "clock-output-names", |
| i, &clk_name)) { |
| break; |
| } |
| |
| /* |
| * If we read an empty clock name then the output is unused |
| */ |
| if (*clk_name == '\0') |
| continue; |
| |
| clk = clk_register_flexgen(clk_name, parents, num_parents, |
| reg, rlock, i, flex_flags); |
| |
| if (IS_ERR(clk)) |
| goto err; |
| |
| clk_data->clks[i] = clk; |
| } |
| |
| kfree(parents); |
| of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); |
| |
| return; |
| |
| err: |
| if (clk_data) |
| kfree(clk_data->clks); |
| kfree(clk_data); |
| kfree(parents); |
| kfree(rlock); |
| } |
| CLK_OF_DECLARE(flexgen, "st,flexgen", st_of_flexgen_setup); |