| /* |
| * Linux on zSeries Channel Measurement Facility support |
| * |
| * Copyright IBM Corp. 2000, 2006 |
| * |
| * Authors: Arnd Bergmann <arndb@de.ibm.com> |
| * Cornelia Huck <cornelia.huck@de.ibm.com> |
| * |
| * original idea from Natarajan Krishnaswami <nkrishna@us.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #define KMSG_COMPONENT "cio" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/bootmem.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/export.h> |
| #include <linux/moduleparam.h> |
| #include <linux/slab.h> |
| #include <linux/timex.h> /* get_tod_clock() */ |
| |
| #include <asm/ccwdev.h> |
| #include <asm/cio.h> |
| #include <asm/cmb.h> |
| #include <asm/div64.h> |
| |
| #include "cio.h" |
| #include "css.h" |
| #include "device.h" |
| #include "ioasm.h" |
| #include "chsc.h" |
| |
| /* |
| * parameter to enable cmf during boot, possible uses are: |
| * "s390cmf" -- enable cmf and allocate 2 MB of ram so measuring can be |
| * used on any subchannel |
| * "s390cmf=<num>" -- enable cmf and allocate enough memory to measure |
| * <num> subchannel, where <num> is an integer |
| * between 1 and 65535, default is 1024 |
| */ |
| #define ARGSTRING "s390cmf" |
| |
| /* indices for READCMB */ |
| enum cmb_index { |
| avg_utilization = -1, |
| /* basic and exended format: */ |
| cmb_ssch_rsch_count = 0, |
| cmb_sample_count, |
| cmb_device_connect_time, |
| cmb_function_pending_time, |
| cmb_device_disconnect_time, |
| cmb_control_unit_queuing_time, |
| cmb_device_active_only_time, |
| /* extended format only: */ |
| cmb_device_busy_time, |
| cmb_initial_command_response_time, |
| }; |
| |
| /** |
| * enum cmb_format - types of supported measurement block formats |
| * |
| * @CMF_BASIC: traditional channel measurement blocks supported |
| * by all machines that we run on |
| * @CMF_EXTENDED: improved format that was introduced with the z990 |
| * machine |
| * @CMF_AUTODETECT: default: use extended format when running on a machine |
| * supporting extended format, otherwise fall back to |
| * basic format |
| */ |
| enum cmb_format { |
| CMF_BASIC, |
| CMF_EXTENDED, |
| CMF_AUTODETECT = -1, |
| }; |
| |
| /* |
| * format - actual format for all measurement blocks |
| * |
| * The format module parameter can be set to a value of 0 (zero) |
| * or 1, indicating basic or extended format as described for |
| * enum cmb_format. |
| */ |
| static int format = CMF_AUTODETECT; |
| module_param(format, bint, 0444); |
| |
| /** |
| * struct cmb_operations - functions to use depending on cmb_format |
| * |
| * Most of these functions operate on a struct ccw_device. There is only |
| * one instance of struct cmb_operations because the format of the measurement |
| * data is guaranteed to be the same for every ccw_device. |
| * |
| * @alloc: allocate memory for a channel measurement block, |
| * either with the help of a special pool or with kmalloc |
| * @free: free memory allocated with @alloc |
| * @set: enable or disable measurement |
| * @read: read a measurement entry at an index |
| * @readall: read a measurement block in a common format |
| * @reset: clear the data in the associated measurement block and |
| * reset its time stamp |
| */ |
| struct cmb_operations { |
| int (*alloc) (struct ccw_device *); |
| void (*free) (struct ccw_device *); |
| int (*set) (struct ccw_device *, u32); |
| u64 (*read) (struct ccw_device *, int); |
| int (*readall)(struct ccw_device *, struct cmbdata *); |
| void (*reset) (struct ccw_device *); |
| /* private: */ |
| struct attribute_group *attr_group; |
| }; |
| static struct cmb_operations *cmbops; |
| |
| struct cmb_data { |
| void *hw_block; /* Pointer to block updated by hardware */ |
| void *last_block; /* Last changed block copied from hardware block */ |
| int size; /* Size of hw_block and last_block */ |
| unsigned long long last_update; /* when last_block was updated */ |
| }; |
| |
| /* |
| * Our user interface is designed in terms of nanoseconds, |
| * while the hardware measures total times in its own |
| * unit. |
| */ |
| static inline u64 time_to_nsec(u32 value) |
| { |
| return ((u64)value) * 128000ull; |
| } |
| |
| /* |
| * Users are usually interested in average times, |
| * not accumulated time. |
| * This also helps us with atomicity problems |
| * when reading sinlge values. |
| */ |
| static inline u64 time_to_avg_nsec(u32 value, u32 count) |
| { |
| u64 ret; |
| |
| /* no samples yet, avoid division by 0 */ |
| if (count == 0) |
| return 0; |
| |
| /* value comes in units of 128 µsec */ |
| ret = time_to_nsec(value); |
| do_div(ret, count); |
| |
| return ret; |
| } |
| |
| #define CMF_OFF 0 |
| #define CMF_ON 2 |
| |
| /* |
| * Activate or deactivate the channel monitor. When area is NULL, |
| * the monitor is deactivated. The channel monitor needs to |
| * be active in order to measure subchannels, which also need |
| * to be enabled. |
| */ |
| static inline void cmf_activate(void *area, unsigned int onoff) |
| { |
| register void * __gpr2 asm("2"); |
| register long __gpr1 asm("1"); |
| |
| __gpr2 = area; |
| __gpr1 = onoff; |
| /* activate channel measurement */ |
| asm("schm" : : "d" (__gpr2), "d" (__gpr1) ); |
| } |
| |
| static int set_schib(struct ccw_device *cdev, u32 mme, int mbfc, |
| unsigned long address) |
| { |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); |
| int ret; |
| |
| sch->config.mme = mme; |
| sch->config.mbfc = mbfc; |
| /* address can be either a block address or a block index */ |
| if (mbfc) |
| sch->config.mba = address; |
| else |
| sch->config.mbi = address; |
| |
| ret = cio_commit_config(sch); |
| if (!mme && ret == -ENODEV) { |
| /* |
| * The task was to disable measurement block updates but |
| * the subchannel is already gone. Report success. |
| */ |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| struct set_schib_struct { |
| u32 mme; |
| int mbfc; |
| unsigned long address; |
| wait_queue_head_t wait; |
| int ret; |
| }; |
| |
| #define CMF_PENDING 1 |
| #define SET_SCHIB_TIMEOUT (10 * HZ) |
| |
| static int set_schib_wait(struct ccw_device *cdev, u32 mme, |
| int mbfc, unsigned long address) |
| { |
| struct set_schib_struct set_data; |
| int ret = -ENODEV; |
| |
| spin_lock_irq(cdev->ccwlock); |
| if (!cdev->private->cmb) |
| goto out; |
| |
| ret = set_schib(cdev, mme, mbfc, address); |
| if (ret != -EBUSY) |
| goto out; |
| |
| /* if the device is not online, don't even try again */ |
| if (cdev->private->state != DEV_STATE_ONLINE) |
| goto out; |
| |
| init_waitqueue_head(&set_data.wait); |
| set_data.mme = mme; |
| set_data.mbfc = mbfc; |
| set_data.address = address; |
| set_data.ret = CMF_PENDING; |
| |
| cdev->private->state = DEV_STATE_CMFCHANGE; |
| cdev->private->cmb_wait = &set_data; |
| spin_unlock_irq(cdev->ccwlock); |
| |
| ret = wait_event_interruptible_timeout(set_data.wait, |
| set_data.ret != CMF_PENDING, |
| SET_SCHIB_TIMEOUT); |
| spin_lock_irq(cdev->ccwlock); |
| if (ret <= 0) { |
| if (set_data.ret == CMF_PENDING) { |
| set_data.ret = (ret == 0) ? -ETIME : ret; |
| if (cdev->private->state == DEV_STATE_CMFCHANGE) |
| cdev->private->state = DEV_STATE_ONLINE; |
| } |
| } |
| cdev->private->cmb_wait = NULL; |
| ret = set_data.ret; |
| out: |
| spin_unlock_irq(cdev->ccwlock); |
| return ret; |
| } |
| |
| void retry_set_schib(struct ccw_device *cdev) |
| { |
| struct set_schib_struct *set_data = cdev->private->cmb_wait; |
| |
| if (!set_data) |
| return; |
| |
| set_data->ret = set_schib(cdev, set_data->mme, set_data->mbfc, |
| set_data->address); |
| wake_up(&set_data->wait); |
| } |
| |
| static int cmf_copy_block(struct ccw_device *cdev) |
| { |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); |
| struct cmb_data *cmb_data; |
| void *hw_block; |
| |
| if (cio_update_schib(sch)) |
| return -ENODEV; |
| |
| if (scsw_fctl(&sch->schib.scsw) & SCSW_FCTL_START_FUNC) { |
| /* Don't copy if a start function is in progress. */ |
| if ((!(scsw_actl(&sch->schib.scsw) & SCSW_ACTL_SUSPENDED)) && |
| (scsw_actl(&sch->schib.scsw) & |
| (SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT)) && |
| (!(scsw_stctl(&sch->schib.scsw) & SCSW_STCTL_SEC_STATUS))) |
| return -EBUSY; |
| } |
| cmb_data = cdev->private->cmb; |
| hw_block = cmb_data->hw_block; |
| memcpy(cmb_data->last_block, hw_block, cmb_data->size); |
| cmb_data->last_update = get_tod_clock(); |
| return 0; |
| } |
| |
| struct copy_block_struct { |
| wait_queue_head_t wait; |
| int ret; |
| }; |
| |
| static int cmf_cmb_copy_wait(struct ccw_device *cdev) |
| { |
| struct copy_block_struct copy_block; |
| int ret = -ENODEV; |
| |
| spin_lock_irq(cdev->ccwlock); |
| if (!cdev->private->cmb) |
| goto out; |
| |
| ret = cmf_copy_block(cdev); |
| if (ret != -EBUSY) |
| goto out; |
| |
| if (cdev->private->state != DEV_STATE_ONLINE) |
| goto out; |
| |
| init_waitqueue_head(©_block.wait); |
| copy_block.ret = CMF_PENDING; |
| |
| cdev->private->state = DEV_STATE_CMFUPDATE; |
| cdev->private->cmb_wait = ©_block; |
| spin_unlock_irq(cdev->ccwlock); |
| |
| ret = wait_event_interruptible(copy_block.wait, |
| copy_block.ret != CMF_PENDING); |
| spin_lock_irq(cdev->ccwlock); |
| if (ret) { |
| if (copy_block.ret == CMF_PENDING) { |
| copy_block.ret = -ERESTARTSYS; |
| if (cdev->private->state == DEV_STATE_CMFUPDATE) |
| cdev->private->state = DEV_STATE_ONLINE; |
| } |
| } |
| cdev->private->cmb_wait = NULL; |
| ret = copy_block.ret; |
| out: |
| spin_unlock_irq(cdev->ccwlock); |
| return ret; |
| } |
| |
| void cmf_retry_copy_block(struct ccw_device *cdev) |
| { |
| struct copy_block_struct *copy_block = cdev->private->cmb_wait; |
| |
| if (!copy_block) |
| return; |
| |
| copy_block->ret = cmf_copy_block(cdev); |
| wake_up(©_block->wait); |
| } |
| |
| static void cmf_generic_reset(struct ccw_device *cdev) |
| { |
| struct cmb_data *cmb_data; |
| |
| spin_lock_irq(cdev->ccwlock); |
| cmb_data = cdev->private->cmb; |
| if (cmb_data) { |
| memset(cmb_data->last_block, 0, cmb_data->size); |
| /* |
| * Need to reset hw block as well to make the hardware start |
| * from 0 again. |
| */ |
| memset(cmb_data->hw_block, 0, cmb_data->size); |
| cmb_data->last_update = 0; |
| } |
| cdev->private->cmb_start_time = get_tod_clock(); |
| spin_unlock_irq(cdev->ccwlock); |
| } |
| |
| /** |
| * struct cmb_area - container for global cmb data |
| * |
| * @mem: pointer to CMBs (only in basic measurement mode) |
| * @list: contains a linked list of all subchannels |
| * @num_channels: number of channels to be measured |
| * @lock: protect concurrent access to @mem and @list |
| */ |
| struct cmb_area { |
| struct cmb *mem; |
| struct list_head list; |
| int num_channels; |
| spinlock_t lock; |
| }; |
| |
| static struct cmb_area cmb_area = { |
| .lock = __SPIN_LOCK_UNLOCKED(cmb_area.lock), |
| .list = LIST_HEAD_INIT(cmb_area.list), |
| .num_channels = 1024, |
| }; |
| |
| /* ****** old style CMB handling ********/ |
| |
| /* |
| * Basic channel measurement blocks are allocated in one contiguous |
| * block of memory, which can not be moved as long as any channel |
| * is active. Therefore, a maximum number of subchannels needs to |
| * be defined somewhere. This is a module parameter, defaulting to |
| * a reasonable value of 1024, or 32 kb of memory. |
| * Current kernels don't allow kmalloc with more than 128kb, so the |
| * maximum is 4096. |
| */ |
| |
| module_param_named(maxchannels, cmb_area.num_channels, uint, 0444); |
| |
| /** |
| * struct cmb - basic channel measurement block |
| * @ssch_rsch_count: number of ssch and rsch |
| * @sample_count: number of samples |
| * @device_connect_time: time of device connect |
| * @function_pending_time: time of function pending |
| * @device_disconnect_time: time of device disconnect |
| * @control_unit_queuing_time: time of control unit queuing |
| * @device_active_only_time: time of device active only |
| * @reserved: unused in basic measurement mode |
| * |
| * The measurement block as used by the hardware. The fields are described |
| * further in z/Architecture Principles of Operation, chapter 17. |
| * |
| * The cmb area made up from these blocks must be a contiguous array and may |
| * not be reallocated or freed. |
| * Only one cmb area can be present in the system. |
| */ |
| struct cmb { |
| u16 ssch_rsch_count; |
| u16 sample_count; |
| u32 device_connect_time; |
| u32 function_pending_time; |
| u32 device_disconnect_time; |
| u32 control_unit_queuing_time; |
| u32 device_active_only_time; |
| u32 reserved[2]; |
| }; |
| |
| /* |
| * Insert a single device into the cmb_area list. |
| * Called with cmb_area.lock held from alloc_cmb. |
| */ |
| static int alloc_cmb_single(struct ccw_device *cdev, |
| struct cmb_data *cmb_data) |
| { |
| struct cmb *cmb; |
| struct ccw_device_private *node; |
| int ret; |
| |
| spin_lock_irq(cdev->ccwlock); |
| if (!list_empty(&cdev->private->cmb_list)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* |
| * Find first unused cmb in cmb_area.mem. |
| * This is a little tricky: cmb_area.list |
| * remains sorted by ->cmb->hw_data pointers. |
| */ |
| cmb = cmb_area.mem; |
| list_for_each_entry(node, &cmb_area.list, cmb_list) { |
| struct cmb_data *data; |
| data = node->cmb; |
| if ((struct cmb*)data->hw_block > cmb) |
| break; |
| cmb++; |
| } |
| if (cmb - cmb_area.mem >= cmb_area.num_channels) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* insert new cmb */ |
| list_add_tail(&cdev->private->cmb_list, &node->cmb_list); |
| cmb_data->hw_block = cmb; |
| cdev->private->cmb = cmb_data; |
| ret = 0; |
| out: |
| spin_unlock_irq(cdev->ccwlock); |
| return ret; |
| } |
| |
| static int alloc_cmb(struct ccw_device *cdev) |
| { |
| int ret; |
| struct cmb *mem; |
| ssize_t size; |
| struct cmb_data *cmb_data; |
| |
| /* Allocate private cmb_data. */ |
| cmb_data = kzalloc(sizeof(struct cmb_data), GFP_KERNEL); |
| if (!cmb_data) |
| return -ENOMEM; |
| |
| cmb_data->last_block = kzalloc(sizeof(struct cmb), GFP_KERNEL); |
| if (!cmb_data->last_block) { |
| kfree(cmb_data); |
| return -ENOMEM; |
| } |
| cmb_data->size = sizeof(struct cmb); |
| spin_lock(&cmb_area.lock); |
| |
| if (!cmb_area.mem) { |
| /* there is no user yet, so we need a new area */ |
| size = sizeof(struct cmb) * cmb_area.num_channels; |
| WARN_ON(!list_empty(&cmb_area.list)); |
| |
| spin_unlock(&cmb_area.lock); |
| mem = (void*)__get_free_pages(GFP_KERNEL | GFP_DMA, |
| get_order(size)); |
| spin_lock(&cmb_area.lock); |
| |
| if (cmb_area.mem) { |
| /* ok, another thread was faster */ |
| free_pages((unsigned long)mem, get_order(size)); |
| } else if (!mem) { |
| /* no luck */ |
| ret = -ENOMEM; |
| goto out; |
| } else { |
| /* everything ok */ |
| memset(mem, 0, size); |
| cmb_area.mem = mem; |
| cmf_activate(cmb_area.mem, CMF_ON); |
| } |
| } |
| |
| /* do the actual allocation */ |
| ret = alloc_cmb_single(cdev, cmb_data); |
| out: |
| spin_unlock(&cmb_area.lock); |
| if (ret) { |
| kfree(cmb_data->last_block); |
| kfree(cmb_data); |
| } |
| return ret; |
| } |
| |
| static void free_cmb(struct ccw_device *cdev) |
| { |
| struct ccw_device_private *priv; |
| struct cmb_data *cmb_data; |
| |
| spin_lock(&cmb_area.lock); |
| spin_lock_irq(cdev->ccwlock); |
| |
| priv = cdev->private; |
| cmb_data = priv->cmb; |
| priv->cmb = NULL; |
| if (cmb_data) |
| kfree(cmb_data->last_block); |
| kfree(cmb_data); |
| list_del_init(&priv->cmb_list); |
| |
| if (list_empty(&cmb_area.list)) { |
| ssize_t size; |
| size = sizeof(struct cmb) * cmb_area.num_channels; |
| cmf_activate(NULL, CMF_OFF); |
| free_pages((unsigned long)cmb_area.mem, get_order(size)); |
| cmb_area.mem = NULL; |
| } |
| spin_unlock_irq(cdev->ccwlock); |
| spin_unlock(&cmb_area.lock); |
| } |
| |
| static int set_cmb(struct ccw_device *cdev, u32 mme) |
| { |
| u16 offset; |
| struct cmb_data *cmb_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| if (!cdev->private->cmb) { |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return -EINVAL; |
| } |
| cmb_data = cdev->private->cmb; |
| offset = mme ? (struct cmb *)cmb_data->hw_block - cmb_area.mem : 0; |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| |
| return set_schib_wait(cdev, mme, 0, offset); |
| } |
| |
| /* calculate utilization in 0.1 percent units */ |
| static u64 __cmb_utilization(u64 device_connect_time, u64 function_pending_time, |
| u64 device_disconnect_time, u64 start_time) |
| { |
| u64 utilization, elapsed_time; |
| |
| utilization = time_to_nsec(device_connect_time + |
| function_pending_time + |
| device_disconnect_time); |
| |
| elapsed_time = get_tod_clock() - start_time; |
| elapsed_time = tod_to_ns(elapsed_time); |
| elapsed_time /= 1000; |
| |
| return elapsed_time ? (utilization / elapsed_time) : 0; |
| } |
| |
| static u64 read_cmb(struct ccw_device *cdev, int index) |
| { |
| struct cmb_data *cmb_data; |
| unsigned long flags; |
| struct cmb *cmb; |
| u64 ret = 0; |
| u32 val; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| cmb_data = cdev->private->cmb; |
| if (!cmb_data) |
| goto out; |
| |
| cmb = cmb_data->hw_block; |
| switch (index) { |
| case avg_utilization: |
| ret = __cmb_utilization(cmb->device_connect_time, |
| cmb->function_pending_time, |
| cmb->device_disconnect_time, |
| cdev->private->cmb_start_time); |
| goto out; |
| case cmb_ssch_rsch_count: |
| ret = cmb->ssch_rsch_count; |
| goto out; |
| case cmb_sample_count: |
| ret = cmb->sample_count; |
| goto out; |
| case cmb_device_connect_time: |
| val = cmb->device_connect_time; |
| break; |
| case cmb_function_pending_time: |
| val = cmb->function_pending_time; |
| break; |
| case cmb_device_disconnect_time: |
| val = cmb->device_disconnect_time; |
| break; |
| case cmb_control_unit_queuing_time: |
| val = cmb->control_unit_queuing_time; |
| break; |
| case cmb_device_active_only_time: |
| val = cmb->device_active_only_time; |
| break; |
| default: |
| goto out; |
| } |
| ret = time_to_avg_nsec(val, cmb->sample_count); |
| out: |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return ret; |
| } |
| |
| static int readall_cmb(struct ccw_device *cdev, struct cmbdata *data) |
| { |
| struct cmb *cmb; |
| struct cmb_data *cmb_data; |
| u64 time; |
| unsigned long flags; |
| int ret; |
| |
| ret = cmf_cmb_copy_wait(cdev); |
| if (ret < 0) |
| return ret; |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| cmb_data = cdev->private->cmb; |
| if (!cmb_data) { |
| ret = -ENODEV; |
| goto out; |
| } |
| if (cmb_data->last_update == 0) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| cmb = cmb_data->last_block; |
| time = cmb_data->last_update - cdev->private->cmb_start_time; |
| |
| memset(data, 0, sizeof(struct cmbdata)); |
| |
| /* we only know values before device_busy_time */ |
| data->size = offsetof(struct cmbdata, device_busy_time); |
| |
| data->elapsed_time = tod_to_ns(time); |
| |
| /* copy data to new structure */ |
| data->ssch_rsch_count = cmb->ssch_rsch_count; |
| data->sample_count = cmb->sample_count; |
| |
| /* time fields are converted to nanoseconds while copying */ |
| data->device_connect_time = time_to_nsec(cmb->device_connect_time); |
| data->function_pending_time = time_to_nsec(cmb->function_pending_time); |
| data->device_disconnect_time = |
| time_to_nsec(cmb->device_disconnect_time); |
| data->control_unit_queuing_time |
| = time_to_nsec(cmb->control_unit_queuing_time); |
| data->device_active_only_time |
| = time_to_nsec(cmb->device_active_only_time); |
| ret = 0; |
| out: |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return ret; |
| } |
| |
| static void reset_cmb(struct ccw_device *cdev) |
| { |
| cmf_generic_reset(cdev); |
| } |
| |
| static int cmf_enabled(struct ccw_device *cdev) |
| { |
| int enabled; |
| |
| spin_lock_irq(cdev->ccwlock); |
| enabled = !!cdev->private->cmb; |
| spin_unlock_irq(cdev->ccwlock); |
| |
| return enabled; |
| } |
| |
| static struct attribute_group cmf_attr_group; |
| |
| static struct cmb_operations cmbops_basic = { |
| .alloc = alloc_cmb, |
| .free = free_cmb, |
| .set = set_cmb, |
| .read = read_cmb, |
| .readall = readall_cmb, |
| .reset = reset_cmb, |
| .attr_group = &cmf_attr_group, |
| }; |
| |
| /* ******** extended cmb handling ********/ |
| |
| /** |
| * struct cmbe - extended channel measurement block |
| * @ssch_rsch_count: number of ssch and rsch |
| * @sample_count: number of samples |
| * @device_connect_time: time of device connect |
| * @function_pending_time: time of function pending |
| * @device_disconnect_time: time of device disconnect |
| * @control_unit_queuing_time: time of control unit queuing |
| * @device_active_only_time: time of device active only |
| * @device_busy_time: time of device busy |
| * @initial_command_response_time: initial command response time |
| * @reserved: unused |
| * |
| * The measurement block as used by the hardware. May be in any 64 bit physical |
| * location. |
| * The fields are described further in z/Architecture Principles of Operation, |
| * third edition, chapter 17. |
| */ |
| struct cmbe { |
| u32 ssch_rsch_count; |
| u32 sample_count; |
| u32 device_connect_time; |
| u32 function_pending_time; |
| u32 device_disconnect_time; |
| u32 control_unit_queuing_time; |
| u32 device_active_only_time; |
| u32 device_busy_time; |
| u32 initial_command_response_time; |
| u32 reserved[7]; |
| } __packed __aligned(64); |
| |
| static struct kmem_cache *cmbe_cache; |
| |
| static int alloc_cmbe(struct ccw_device *cdev) |
| { |
| struct cmb_data *cmb_data; |
| struct cmbe *cmbe; |
| int ret = -ENOMEM; |
| |
| cmbe = kmem_cache_zalloc(cmbe_cache, GFP_KERNEL); |
| if (!cmbe) |
| return ret; |
| |
| cmb_data = kzalloc(sizeof(*cmb_data), GFP_KERNEL); |
| if (!cmb_data) |
| goto out_free; |
| |
| cmb_data->last_block = kzalloc(sizeof(struct cmbe), GFP_KERNEL); |
| if (!cmb_data->last_block) |
| goto out_free; |
| |
| cmb_data->size = sizeof(*cmbe); |
| cmb_data->hw_block = cmbe; |
| |
| spin_lock(&cmb_area.lock); |
| spin_lock_irq(cdev->ccwlock); |
| if (cdev->private->cmb) |
| goto out_unlock; |
| |
| cdev->private->cmb = cmb_data; |
| |
| /* activate global measurement if this is the first channel */ |
| if (list_empty(&cmb_area.list)) |
| cmf_activate(NULL, CMF_ON); |
| list_add_tail(&cdev->private->cmb_list, &cmb_area.list); |
| |
| spin_unlock_irq(cdev->ccwlock); |
| spin_unlock(&cmb_area.lock); |
| return 0; |
| |
| out_unlock: |
| spin_unlock_irq(cdev->ccwlock); |
| spin_unlock(&cmb_area.lock); |
| ret = -EBUSY; |
| out_free: |
| if (cmb_data) |
| kfree(cmb_data->last_block); |
| kfree(cmb_data); |
| kmem_cache_free(cmbe_cache, cmbe); |
| |
| return ret; |
| } |
| |
| static void free_cmbe(struct ccw_device *cdev) |
| { |
| struct cmb_data *cmb_data; |
| |
| spin_lock(&cmb_area.lock); |
| spin_lock_irq(cdev->ccwlock); |
| cmb_data = cdev->private->cmb; |
| cdev->private->cmb = NULL; |
| if (cmb_data) { |
| kfree(cmb_data->last_block); |
| kmem_cache_free(cmbe_cache, cmb_data->hw_block); |
| } |
| kfree(cmb_data); |
| |
| /* deactivate global measurement if this is the last channel */ |
| list_del_init(&cdev->private->cmb_list); |
| if (list_empty(&cmb_area.list)) |
| cmf_activate(NULL, CMF_OFF); |
| spin_unlock_irq(cdev->ccwlock); |
| spin_unlock(&cmb_area.lock); |
| } |
| |
| static int set_cmbe(struct ccw_device *cdev, u32 mme) |
| { |
| unsigned long mba; |
| struct cmb_data *cmb_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| if (!cdev->private->cmb) { |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return -EINVAL; |
| } |
| cmb_data = cdev->private->cmb; |
| mba = mme ? (unsigned long) cmb_data->hw_block : 0; |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| |
| return set_schib_wait(cdev, mme, 1, mba); |
| } |
| |
| static u64 read_cmbe(struct ccw_device *cdev, int index) |
| { |
| struct cmb_data *cmb_data; |
| unsigned long flags; |
| struct cmbe *cmb; |
| u64 ret = 0; |
| u32 val; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| cmb_data = cdev->private->cmb; |
| if (!cmb_data) |
| goto out; |
| |
| cmb = cmb_data->hw_block; |
| switch (index) { |
| case avg_utilization: |
| ret = __cmb_utilization(cmb->device_connect_time, |
| cmb->function_pending_time, |
| cmb->device_disconnect_time, |
| cdev->private->cmb_start_time); |
| goto out; |
| case cmb_ssch_rsch_count: |
| ret = cmb->ssch_rsch_count; |
| goto out; |
| case cmb_sample_count: |
| ret = cmb->sample_count; |
| goto out; |
| case cmb_device_connect_time: |
| val = cmb->device_connect_time; |
| break; |
| case cmb_function_pending_time: |
| val = cmb->function_pending_time; |
| break; |
| case cmb_device_disconnect_time: |
| val = cmb->device_disconnect_time; |
| break; |
| case cmb_control_unit_queuing_time: |
| val = cmb->control_unit_queuing_time; |
| break; |
| case cmb_device_active_only_time: |
| val = cmb->device_active_only_time; |
| break; |
| case cmb_device_busy_time: |
| val = cmb->device_busy_time; |
| break; |
| case cmb_initial_command_response_time: |
| val = cmb->initial_command_response_time; |
| break; |
| default: |
| goto out; |
| } |
| ret = time_to_avg_nsec(val, cmb->sample_count); |
| out: |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return ret; |
| } |
| |
| static int readall_cmbe(struct ccw_device *cdev, struct cmbdata *data) |
| { |
| struct cmbe *cmb; |
| struct cmb_data *cmb_data; |
| u64 time; |
| unsigned long flags; |
| int ret; |
| |
| ret = cmf_cmb_copy_wait(cdev); |
| if (ret < 0) |
| return ret; |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| cmb_data = cdev->private->cmb; |
| if (!cmb_data) { |
| ret = -ENODEV; |
| goto out; |
| } |
| if (cmb_data->last_update == 0) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| time = cmb_data->last_update - cdev->private->cmb_start_time; |
| |
| memset (data, 0, sizeof(struct cmbdata)); |
| |
| /* we only know values before device_busy_time */ |
| data->size = offsetof(struct cmbdata, device_busy_time); |
| |
| data->elapsed_time = tod_to_ns(time); |
| |
| cmb = cmb_data->last_block; |
| /* copy data to new structure */ |
| data->ssch_rsch_count = cmb->ssch_rsch_count; |
| data->sample_count = cmb->sample_count; |
| |
| /* time fields are converted to nanoseconds while copying */ |
| data->device_connect_time = time_to_nsec(cmb->device_connect_time); |
| data->function_pending_time = time_to_nsec(cmb->function_pending_time); |
| data->device_disconnect_time = |
| time_to_nsec(cmb->device_disconnect_time); |
| data->control_unit_queuing_time |
| = time_to_nsec(cmb->control_unit_queuing_time); |
| data->device_active_only_time |
| = time_to_nsec(cmb->device_active_only_time); |
| data->device_busy_time = time_to_nsec(cmb->device_busy_time); |
| data->initial_command_response_time |
| = time_to_nsec(cmb->initial_command_response_time); |
| |
| ret = 0; |
| out: |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return ret; |
| } |
| |
| static void reset_cmbe(struct ccw_device *cdev) |
| { |
| cmf_generic_reset(cdev); |
| } |
| |
| static struct attribute_group cmf_attr_group_ext; |
| |
| static struct cmb_operations cmbops_extended = { |
| .alloc = alloc_cmbe, |
| .free = free_cmbe, |
| .set = set_cmbe, |
| .read = read_cmbe, |
| .readall = readall_cmbe, |
| .reset = reset_cmbe, |
| .attr_group = &cmf_attr_group_ext, |
| }; |
| |
| static ssize_t cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx) |
| { |
| return sprintf(buf, "%lld\n", |
| (unsigned long long) cmf_read(to_ccwdev(dev), idx)); |
| } |
| |
| static ssize_t cmb_show_avg_sample_interval(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ccw_device *cdev = to_ccwdev(dev); |
| unsigned long count; |
| long interval; |
| |
| count = cmf_read(cdev, cmb_sample_count); |
| spin_lock_irq(cdev->ccwlock); |
| if (count) { |
| interval = get_tod_clock() - cdev->private->cmb_start_time; |
| interval = tod_to_ns(interval); |
| interval /= count; |
| } else |
| interval = -1; |
| spin_unlock_irq(cdev->ccwlock); |
| return sprintf(buf, "%ld\n", interval); |
| } |
| |
| static ssize_t cmb_show_avg_utilization(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned long u = cmf_read(to_ccwdev(dev), avg_utilization); |
| |
| return sprintf(buf, "%02lu.%01lu%%\n", u / 10, u % 10); |
| } |
| |
| #define cmf_attr(name) \ |
| static ssize_t show_##name(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { return cmb_show_attr((dev), buf, cmb_##name); } \ |
| static DEVICE_ATTR(name, 0444, show_##name, NULL); |
| |
| #define cmf_attr_avg(name) \ |
| static ssize_t show_avg_##name(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { return cmb_show_attr((dev), buf, cmb_##name); } \ |
| static DEVICE_ATTR(avg_##name, 0444, show_avg_##name, NULL); |
| |
| cmf_attr(ssch_rsch_count); |
| cmf_attr(sample_count); |
| cmf_attr_avg(device_connect_time); |
| cmf_attr_avg(function_pending_time); |
| cmf_attr_avg(device_disconnect_time); |
| cmf_attr_avg(control_unit_queuing_time); |
| cmf_attr_avg(device_active_only_time); |
| cmf_attr_avg(device_busy_time); |
| cmf_attr_avg(initial_command_response_time); |
| |
| static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval, |
| NULL); |
| static DEVICE_ATTR(avg_utilization, 0444, cmb_show_avg_utilization, NULL); |
| |
| static struct attribute *cmf_attributes[] = { |
| &dev_attr_avg_sample_interval.attr, |
| &dev_attr_avg_utilization.attr, |
| &dev_attr_ssch_rsch_count.attr, |
| &dev_attr_sample_count.attr, |
| &dev_attr_avg_device_connect_time.attr, |
| &dev_attr_avg_function_pending_time.attr, |
| &dev_attr_avg_device_disconnect_time.attr, |
| &dev_attr_avg_control_unit_queuing_time.attr, |
| &dev_attr_avg_device_active_only_time.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group cmf_attr_group = { |
| .name = "cmf", |
| .attrs = cmf_attributes, |
| }; |
| |
| static struct attribute *cmf_attributes_ext[] = { |
| &dev_attr_avg_sample_interval.attr, |
| &dev_attr_avg_utilization.attr, |
| &dev_attr_ssch_rsch_count.attr, |
| &dev_attr_sample_count.attr, |
| &dev_attr_avg_device_connect_time.attr, |
| &dev_attr_avg_function_pending_time.attr, |
| &dev_attr_avg_device_disconnect_time.attr, |
| &dev_attr_avg_control_unit_queuing_time.attr, |
| &dev_attr_avg_device_active_only_time.attr, |
| &dev_attr_avg_device_busy_time.attr, |
| &dev_attr_avg_initial_command_response_time.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group cmf_attr_group_ext = { |
| .name = "cmf", |
| .attrs = cmf_attributes_ext, |
| }; |
| |
| static ssize_t cmb_enable_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ccw_device *cdev = to_ccwdev(dev); |
| |
| return sprintf(buf, "%d\n", cmf_enabled(cdev)); |
| } |
| |
| static ssize_t cmb_enable_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t c) |
| { |
| struct ccw_device *cdev = to_ccwdev(dev); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 16, &val); |
| if (ret) |
| return ret; |
| |
| switch (val) { |
| case 0: |
| ret = disable_cmf(cdev); |
| break; |
| case 1: |
| ret = enable_cmf(cdev); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret ? ret : c; |
| } |
| DEVICE_ATTR_RW(cmb_enable); |
| |
| int ccw_set_cmf(struct ccw_device *cdev, int enable) |
| { |
| return cmbops->set(cdev, enable ? 2 : 0); |
| } |
| |
| /** |
| * enable_cmf() - switch on the channel measurement for a specific device |
| * @cdev: The ccw device to be enabled |
| * |
| * Returns %0 for success or a negative error value. |
| * Note: If this is called on a device for which channel measurement is already |
| * enabled a reset of the measurement data is triggered. |
| * Context: |
| * non-atomic |
| */ |
| int enable_cmf(struct ccw_device *cdev) |
| { |
| int ret = 0; |
| |
| device_lock(&cdev->dev); |
| if (cmf_enabled(cdev)) { |
| cmbops->reset(cdev); |
| goto out_unlock; |
| } |
| get_device(&cdev->dev); |
| ret = cmbops->alloc(cdev); |
| if (ret) |
| goto out; |
| cmbops->reset(cdev); |
| ret = sysfs_create_group(&cdev->dev.kobj, cmbops->attr_group); |
| if (ret) { |
| cmbops->free(cdev); |
| goto out; |
| } |
| ret = cmbops->set(cdev, 2); |
| if (ret) { |
| sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group); |
| cmbops->free(cdev); |
| } |
| out: |
| if (ret) |
| put_device(&cdev->dev); |
| out_unlock: |
| device_unlock(&cdev->dev); |
| return ret; |
| } |
| |
| /** |
| * __disable_cmf() - switch off the channel measurement for a specific device |
| * @cdev: The ccw device to be disabled |
| * |
| * Returns %0 for success or a negative error value. |
| * |
| * Context: |
| * non-atomic, device_lock() held. |
| */ |
| int __disable_cmf(struct ccw_device *cdev) |
| { |
| int ret; |
| |
| ret = cmbops->set(cdev, 0); |
| if (ret) |
| return ret; |
| |
| sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group); |
| cmbops->free(cdev); |
| put_device(&cdev->dev); |
| |
| return ret; |
| } |
| |
| /** |
| * disable_cmf() - switch off the channel measurement for a specific device |
| * @cdev: The ccw device to be disabled |
| * |
| * Returns %0 for success or a negative error value. |
| * |
| * Context: |
| * non-atomic |
| */ |
| int disable_cmf(struct ccw_device *cdev) |
| { |
| int ret; |
| |
| device_lock(&cdev->dev); |
| ret = __disable_cmf(cdev); |
| device_unlock(&cdev->dev); |
| |
| return ret; |
| } |
| |
| /** |
| * cmf_read() - read one value from the current channel measurement block |
| * @cdev: the channel to be read |
| * @index: the index of the value to be read |
| * |
| * Returns the value read or %0 if the value cannot be read. |
| * |
| * Context: |
| * any |
| */ |
| u64 cmf_read(struct ccw_device *cdev, int index) |
| { |
| return cmbops->read(cdev, index); |
| } |
| |
| /** |
| * cmf_readall() - read the current channel measurement block |
| * @cdev: the channel to be read |
| * @data: a pointer to a data block that will be filled |
| * |
| * Returns %0 on success, a negative error value otherwise. |
| * |
| * Context: |
| * any |
| */ |
| int cmf_readall(struct ccw_device *cdev, struct cmbdata *data) |
| { |
| return cmbops->readall(cdev, data); |
| } |
| |
| /* Reenable cmf when a disconnected device becomes available again. */ |
| int cmf_reenable(struct ccw_device *cdev) |
| { |
| cmbops->reset(cdev); |
| return cmbops->set(cdev, 2); |
| } |
| |
| /** |
| * cmf_reactivate() - reactivate measurement block updates |
| * |
| * Use this during resume from hibernate. |
| */ |
| void cmf_reactivate(void) |
| { |
| spin_lock(&cmb_area.lock); |
| if (!list_empty(&cmb_area.list)) |
| cmf_activate(cmb_area.mem, CMF_ON); |
| spin_unlock(&cmb_area.lock); |
| } |
| |
| static int __init init_cmbe(void) |
| { |
| cmbe_cache = kmem_cache_create("cmbe_cache", sizeof(struct cmbe), |
| __alignof__(struct cmbe), 0, NULL); |
| |
| return cmbe_cache ? 0 : -ENOMEM; |
| } |
| |
| static int __init init_cmf(void) |
| { |
| char *format_string; |
| char *detect_string; |
| int ret; |
| |
| /* |
| * If the user did not give a parameter, see if we are running on a |
| * machine supporting extended measurement blocks, otherwise fall back |
| * to basic mode. |
| */ |
| if (format == CMF_AUTODETECT) { |
| if (!css_general_characteristics.ext_mb) { |
| format = CMF_BASIC; |
| } else { |
| format = CMF_EXTENDED; |
| } |
| detect_string = "autodetected"; |
| } else { |
| detect_string = "parameter"; |
| } |
| |
| switch (format) { |
| case CMF_BASIC: |
| format_string = "basic"; |
| cmbops = &cmbops_basic; |
| break; |
| case CMF_EXTENDED: |
| format_string = "extended"; |
| cmbops = &cmbops_extended; |
| |
| ret = init_cmbe(); |
| if (ret) |
| return ret; |
| break; |
| default: |
| return -EINVAL; |
| } |
| pr_info("Channel measurement facility initialized using format " |
| "%s (mode %s)\n", format_string, detect_string); |
| return 0; |
| } |
| device_initcall(init_cmf); |
| |
| EXPORT_SYMBOL_GPL(enable_cmf); |
| EXPORT_SYMBOL_GPL(disable_cmf); |
| EXPORT_SYMBOL_GPL(cmf_read); |
| EXPORT_SYMBOL_GPL(cmf_readall); |