| /* |
| * support for the imx6 based aristainetos2 board |
| * |
| * Copyright (C) 2015 Heiko Schocher <hs@denx.de> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/imx6qdl-clock.h> |
| |
| / { |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <7>; |
| enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| |
| reg_2p5v: 2p5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "2P5V"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: 3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_usbh1_vbus: usb-h1-vbus { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; |
| regulator-name = "usb_h1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_usbotg_vbus: usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH |
| &gpio4 10 GPIO_ACTIVE_HIGH |
| &gpio4 11 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "okay"; |
| }; |
| |
| &ecspi2 { |
| cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| status = "okay"; |
| }; |
| |
| &ecspi4 { |
| cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi4>; |
| status = "okay"; |
| |
| flash: m25p80@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| spi-max-frequency = <20000000>; |
| reg = <1>; |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic@58 { |
| compatible = "dlg,da9063"; |
| reg = <0x58>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <04 0x8>; |
| |
| regulators { |
| bcore1 { |
| regulator-name = "bcore1"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| bcore2 { |
| regulator-name = "bcore2"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| bpro { |
| regulator-name = "bpro"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| bperi { |
| regulator-name = "bperi"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| bmem { |
| regulator-name = "bmem"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo2 { |
| regulator-name = "ldo2"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| ldo3 { |
| regulator-name = "ldo3"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo4 { |
| regulator-name = "ldo4"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo5 { |
| regulator-name = "ldo5"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo6 { |
| regulator-name = "ldo6"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo7 { |
| regulator-name = "ldo7"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo8 { |
| regulator-name = "ldo8"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo9 { |
| regulator-name = "ldo9"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo10 { |
| regulator-name = "ldo10"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| ldo11 { |
| regulator-name = "ldo11"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| bio { |
| regulator-name = "bio"; |
| regulator-always-on = <1>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| }; |
| }; |
| |
| tmp103: tmp103@71 { |
| compatible = "ti,tmp103"; |
| reg = <0x71>; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| expander: tca6416@20 { |
| compatible = "ti,tca6416"; |
| reg = <0x20>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,m41t00"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| eeprom@50{ |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@57{ |
| compatible = "atmel,24c64"; |
| reg = <0x57>; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii"; |
| phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>; |
| txd0-skew-ps = <0>; |
| txd1-skew-ps = <0>; |
| txd2-skew-ps = <0>; |
| txd3-skew-ps = <0>; |
| status = "okay"; |
| }; |
| |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand>; |
| status = "okay"; |
| }; |
| |
| &pcie { |
| reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usbh1_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usbotg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| disable-over-current; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio>; |
| |
| pinctrl_audmux: audmux { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */ |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */ |
| MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */ |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 |
| MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 |
| MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */ |
| MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */ |
| >; |
| }; |
| |
| pinctrl_ecspi4: ecspi4grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 |
| MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ |
| MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ |
| MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 |
| MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio: gpiogrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */ |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */ |
| MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */ |
| MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */ |
| MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */ |
| MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */ |
| MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */ |
| MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */ |
| MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */ |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/ |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/ |
| MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */ |
| MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */ |
| >; |
| }; |
| |
| pinctrl_gpmi_nand: gpmi-nand { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 |
| MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 |
| MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 |
| MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 |
| MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 |
| MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 |
| MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 |
| MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 |
| MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 |
| MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 |
| MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 |
| MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 |
| MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 |
| MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 |
| MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 |
| MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */ |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus { |
| fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>; |
| }; |
| |
| pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus { |
| fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 |
| MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */ |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */ |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 |
| MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */ |
| MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */ |
| MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */ |
| >; |
| }; |
| }; |