include/linux/spi/mxs-spi.h - kernel/msm-4.19 - Gitiles

 /*
  * include/linux/spi/mxs-spi.h
  *
  * Freescale i.MX233/i.MX28 SPI controller register definition
  *
  * Copyright 2008 Embedded Alley Solutions, Inc.
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */

 #ifndef __LINUX_SPI_MXS_SPI_H__
 #define __LINUX_SPI_MXS_SPI_H__

 #define ssp_is_old(host)	((host)->devid == IMX23_SSP)

 /* SSP registers */
 #define HW_SSP_CTRL0				0x000
 #define  BM_SSP_CTRL0_RUN			(1 << 29)
 #define  BM_SSP_CTRL0_SDIO_IRQ_CHECK		(1 << 28)
 #define  BM_SSP_CTRL0_LOCK_CS			(1 << 27)
 #define  BM_SSP_CTRL0_IGNORE_CRC		(1 << 26)
 #define  BM_SSP_CTRL0_READ			(1 << 25)
 #define  BM_SSP_CTRL0_DATA_XFER			(1 << 24)
 #define  BP_SSP_CTRL0_BUS_WIDTH			22
 #define  BM_SSP_CTRL0_BUS_WIDTH			(0x3 << 22)
 #define  BM_SSP_CTRL0_WAIT_FOR_IRQ		(1 << 21)
 #define  BM_SSP_CTRL0_WAIT_FOR_CMD		(1 << 20)
 #define  BM_SSP_CTRL0_LONG_RESP			(1 << 19)
 #define  BM_SSP_CTRL0_GET_RESP			(1 << 17)
 #define  BM_SSP_CTRL0_ENABLE			(1 << 16)
 #define  BP_SSP_CTRL0_XFER_COUNT		0
 #define  BM_SSP_CTRL0_XFER_COUNT		0xffff
 #define HW_SSP_CMD0				0x010
 #define  BM_SSP_CMD0_DBL_DATA_RATE_EN		(1 << 25)
 #define  BM_SSP_CMD0_SLOW_CLKING_EN		(1 << 22)
 #define  BM_SSP_CMD0_CONT_CLKING_EN		(1 << 21)
 #define  BM_SSP_CMD0_APPEND_8CYC		(1 << 20)
 #define  BP_SSP_CMD0_BLOCK_SIZE			16
 #define  BM_SSP_CMD0_BLOCK_SIZE			(0xf << 16)
 #define  BP_SSP_CMD0_BLOCK_COUNT		8
 #define  BM_SSP_CMD0_BLOCK_COUNT		(0xff << 8)
 #define  BP_SSP_CMD0_CMD			0
 #define  BM_SSP_CMD0_CMD			0xff
 #define HW_SSP_CMD1				0x020
 #define HW_SSP_XFER_SIZE			0x030
 #define HW_SSP_BLOCK_SIZE			0x040
 #define  BP_SSP_BLOCK_SIZE_BLOCK_COUNT		4
 #define  BM_SSP_BLOCK_SIZE_BLOCK_COUNT		(0xffffff << 4)
 #define  BP_SSP_BLOCK_SIZE_BLOCK_SIZE		0
 #define  BM_SSP_BLOCK_SIZE_BLOCK_SIZE		0xf
 #define HW_SSP_TIMING(h)			(ssp_is_old(h) ? 0x050 : 0x070)
 #define  BP_SSP_TIMING_TIMEOUT			16
 #define  BM_SSP_TIMING_TIMEOUT			(0xffff << 16)
 #define  BP_SSP_TIMING_CLOCK_DIVIDE		8
 #define  BM_SSP_TIMING_CLOCK_DIVIDE		(0xff << 8)
 #define  BF_SSP_TIMING_CLOCK_DIVIDE(v)		\
 			(((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
 #define  BP_SSP_TIMING_CLOCK_RATE		0
 #define  BM_SSP_TIMING_CLOCK_RATE		0xff
 #define BF_SSP_TIMING_CLOCK_RATE(v)		\
 			(((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
 #define HW_SSP_CTRL1(h)				(ssp_is_old(h) ? 0x060 : 0x080)
 #define  BM_SSP_CTRL1_SDIO_IRQ			(1 << 31)
 #define  BM_SSP_CTRL1_SDIO_IRQ_EN		(1 << 30)
 #define  BM_SSP_CTRL1_RESP_ERR_IRQ		(1 << 29)
 #define  BM_SSP_CTRL1_RESP_ERR_IRQ_EN		(1 << 28)
 #define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ		(1 << 27)
 #define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	(1 << 26)
 #define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ		(1 << 25)
 #define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	(1 << 24)
 #define  BM_SSP_CTRL1_DATA_CRC_IRQ		(1 << 23)
 #define  BM_SSP_CTRL1_DATA_CRC_IRQ_EN		(1 << 22)
 #define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ		(1 << 21)
 #define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN	(1 << 20)
 #define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ		(1 << 17)
 #define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	(1 << 16)
 #define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ		(1 << 15)
 #define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN	(1 << 14)
 #define  BM_SSP_CTRL1_DMA_ENABLE		(1 << 13)
 #define  BM_SSP_CTRL1_PHASE			(1 << 10)
 #define  BM_SSP_CTRL1_POLARITY			(1 << 9)
 #define  BP_SSP_CTRL1_WORD_LENGTH		4
 #define  BM_SSP_CTRL1_WORD_LENGTH		(0xf << 4)
 #define  BF_SSP_CTRL1_WORD_LENGTH(v)		\
 			(((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
 #define  BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS	0x3
 #define  BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS	0x7
 #define  BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS	0xF
 #define  BP_SSP_CTRL1_SSP_MODE			0
 #define  BM_SSP_CTRL1_SSP_MODE			0xf
 #define  BF_SSP_CTRL1_SSP_MODE(v)		\
 			(((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
 #define  BV_SSP_CTRL1_SSP_MODE__SPI		0x0
 #define  BV_SSP_CTRL1_SSP_MODE__SSI		0x1
 #define  BV_SSP_CTRL1_SSP_MODE__SD_MMC		0x3
 #define  BV_SSP_CTRL1_SSP_MODE__MS		0x4

 #define HW_SSP_DATA(h)				(ssp_is_old(h) ? 0x070 : 0x090)

 #define HW_SSP_SDRESP0(h)			(ssp_is_old(h) ? 0x080 : 0x0a0)
 #define HW_SSP_SDRESP1(h)			(ssp_is_old(h) ? 0x090 : 0x0b0)
 #define HW_SSP_SDRESP2(h)			(ssp_is_old(h) ? 0x0a0 : 0x0c0)
 #define HW_SSP_SDRESP3(h)			(ssp_is_old(h) ? 0x0b0 : 0x0d0)
 #define HW_SSP_STATUS(h)			(ssp_is_old(h) ? 0x0c0 : 0x100)
 #define  BM_SSP_STATUS_CARD_DETECT		(1 << 28)
 #define  BM_SSP_STATUS_SDIO_IRQ			(1 << 17)
 #define  BM_SSP_STATUS_FIFO_EMPTY		(1 << 5)

 #define BF_SSP(value, field)	(((value) << BP_SSP_##field) & BM_SSP_##field)

 #define SSP_PIO_NUM	3

 enum mxs_ssp_id {
 	IMX23_SSP,
 	IMX28_SSP,
 };

 struct mxs_ssp {
 	struct device			*dev;
 	void __iomem			*base;
 	struct clk			*clk;
 	unsigned int			clk_rate;
 	enum mxs_ssp_id			devid;
 };

 void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);

 #endif	/* __LINUX_SPI_MXS_SPI_H__ */
	/*
	* include/linux/spi/mxs-spi.h
	*
	* Freescale i.MX233/i.MX28 SPI controller register definition
	*
	* Copyright 2008 Embedded Alley Solutions, Inc.
	* Copyright 2009-2011 Freescale Semiconductor, Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
	*/

	#ifndef __LINUX_SPI_MXS_SPI_H__
	#define __LINUX_SPI_MXS_SPI_H__

	#define ssp_is_old(host) ((host)->devid == IMX23_SSP)

	/* SSP registers */
	#define HW_SSP_CTRL0 0x000
	#define BM_SSP_CTRL0_RUN (1 << 29)
	#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
	#define BM_SSP_CTRL0_LOCK_CS (1 << 27)
	#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
	#define BM_SSP_CTRL0_READ (1 << 25)
	#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
	#define BP_SSP_CTRL0_BUS_WIDTH 22
	#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
	#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
	#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
	#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
	#define BM_SSP_CTRL0_GET_RESP (1 << 17)
	#define BM_SSP_CTRL0_ENABLE (1 << 16)
	#define BP_SSP_CTRL0_XFER_COUNT 0
	#define BM_SSP_CTRL0_XFER_COUNT 0xffff
	#define HW_SSP_CMD0 0x010
	#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
	#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
	#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
	#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
	#define BP_SSP_CMD0_BLOCK_SIZE 16
	#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
	#define BP_SSP_CMD0_BLOCK_COUNT 8
	#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
	#define BP_SSP_CMD0_CMD 0
	#define BM_SSP_CMD0_CMD 0xff
	#define HW_SSP_CMD1 0x020
	#define HW_SSP_XFER_SIZE 0x030
	#define HW_SSP_BLOCK_SIZE 0x040
	#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
	#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
	#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
	#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
	#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
	#define BP_SSP_TIMING_TIMEOUT 16
	#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
	#define BP_SSP_TIMING_CLOCK_DIVIDE 8
	#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
	#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \
	(((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
	#define BP_SSP_TIMING_CLOCK_RATE 0
	#define BM_SSP_TIMING_CLOCK_RATE 0xff
	#define BF_SSP_TIMING_CLOCK_RATE(v) \
	(((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
	#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
	#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
	#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
	#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
	#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
	#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
	#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
	#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
	#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
	#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
	#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
	#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
	#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
	#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
	#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
	#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
	#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
	#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
	#define BM_SSP_CTRL1_PHASE (1 << 10)
	#define BM_SSP_CTRL1_POLARITY (1 << 9)
	#define BP_SSP_CTRL1_WORD_LENGTH 4
	#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
	#define BF_SSP_CTRL1_WORD_LENGTH(v) \
	(((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
	#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3
	#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7
	#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF
	#define BP_SSP_CTRL1_SSP_MODE 0
	#define BM_SSP_CTRL1_SSP_MODE 0xf
	#define BF_SSP_CTRL1_SSP_MODE(v) \
	(((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
	#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0
	#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1
	#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3
	#define BV_SSP_CTRL1_SSP_MODE__MS 0x4

	#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090)

	#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
	#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
	#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
	#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
	#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
	#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
	#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
	#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5)

	#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)

	#define SSP_PIO_NUM 3

	enum mxs_ssp_id {
	IMX23_SSP,
	IMX28_SSP,
	};

	struct mxs_ssp {
	struct device *dev;
	void __iomem *base;
	struct clk *clk;
	unsigned int clk_rate;
	enum mxs_ssp_id devid;
	};

	void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);

	#endif /* __LINUX_SPI_MXS_SPI_H__ */