| /* |
| * drivers/extcon/extcon-adc-jack.c |
| * |
| * Analog Jack extcon driver with ADC-based detection capability. |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * MyungJoo Ham <myungjoo.ham@samsung.com> |
| * |
| * Modified for calling to IIO to get adc by <anish.singh@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| #include <linux/iio/consumer.h> |
| #include <linux/extcon/extcon-adc-jack.h> |
| #include <linux/extcon.h> |
| |
| /** |
| * struct adc_jack_data - internal data for adc_jack device driver |
| * @edev - extcon device. |
| * @cable_names - list of supported cables. |
| * @num_cables - size of cable_names. |
| * @adc_conditions - list of adc value conditions. |
| * @num_conditions - size of adc_conditions. |
| * @irq - irq number of attach/detach event (0 if not exist). |
| * @handling_delay - interrupt handler will schedule extcon event |
| * handling at handling_delay jiffies. |
| * @handler - extcon event handler called by interrupt handler. |
| * @chan - iio channel being queried. |
| */ |
| struct adc_jack_data { |
| struct extcon_dev edev; |
| |
| const char **cable_names; |
| int num_cables; |
| struct adc_jack_cond *adc_conditions; |
| int num_conditions; |
| |
| int irq; |
| unsigned long handling_delay; /* in jiffies */ |
| struct delayed_work handler; |
| |
| struct iio_channel *chan; |
| }; |
| |
| static void adc_jack_handler(struct work_struct *work) |
| { |
| struct adc_jack_data *data = container_of(to_delayed_work(work), |
| struct adc_jack_data, |
| handler); |
| u32 state = 0; |
| int ret, adc_val; |
| int i; |
| |
| ret = iio_read_channel_raw(data->chan, &adc_val); |
| if (ret < 0) { |
| dev_err(data->edev.dev, "read channel() error: %d\n", ret); |
| return; |
| } |
| |
| /* Get state from adc value with adc_conditions */ |
| for (i = 0; i < data->num_conditions; i++) { |
| struct adc_jack_cond *def = &data->adc_conditions[i]; |
| if (!def->state) |
| break; |
| if (def->min_adc <= adc_val && def->max_adc >= adc_val) { |
| state = def->state; |
| break; |
| } |
| } |
| /* if no def has met, it means state = 0 (no cables attached) */ |
| |
| extcon_set_state(&data->edev, state); |
| } |
| |
| static irqreturn_t adc_jack_irq_thread(int irq, void *_data) |
| { |
| struct adc_jack_data *data = _data; |
| |
| schedule_delayed_work(&data->handler, data->handling_delay); |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit adc_jack_probe(struct platform_device *pdev) |
| { |
| struct adc_jack_data *data; |
| struct adc_jack_pdata *pdata = pdev->dev.platform_data; |
| int i, err = 0; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->edev.name = pdata->name; |
| |
| if (!pdata->cable_names) { |
| err = -EINVAL; |
| dev_err(&pdev->dev, "error: cable_names not defined.\n"); |
| goto out; |
| } |
| |
| data->edev.supported_cable = pdata->cable_names; |
| |
| /* Check the length of array and set num_cables */ |
| for (i = 0; data->edev.supported_cable[i]; i++) |
| ; |
| if (i == 0 || i > SUPPORTED_CABLE_MAX) { |
| err = -EINVAL; |
| dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n", |
| i - 1); |
| goto out; |
| } |
| data->num_cables = i; |
| |
| if (!pdata->adc_conditions || |
| !pdata->adc_conditions[0].state) { |
| err = -EINVAL; |
| dev_err(&pdev->dev, "error: adc_conditions not defined.\n"); |
| goto out; |
| } |
| data->adc_conditions = pdata->adc_conditions; |
| |
| /* Check the length of array and set num_conditions */ |
| for (i = 0; data->adc_conditions[i].state; i++) |
| ; |
| data->num_conditions = i; |
| |
| data->chan = iio_channel_get(dev_name(&pdev->dev), |
| pdata->consumer_channel); |
| if (IS_ERR(data->chan)) { |
| err = PTR_ERR(data->chan); |
| goto out; |
| } |
| |
| data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms); |
| |
| INIT_DEFERRABLE_WORK(&data->handler, adc_jack_handler); |
| |
| platform_set_drvdata(pdev, data); |
| |
| err = extcon_dev_register(&data->edev, &pdev->dev); |
| if (err) |
| goto out; |
| |
| data->irq = platform_get_irq(pdev, 0); |
| if (!data->irq) { |
| dev_err(&pdev->dev, "platform_get_irq failed\n"); |
| err = -ENODEV; |
| goto err_irq; |
| } |
| |
| err = request_any_context_irq(data->irq, adc_jack_irq_thread, |
| pdata->irq_flags, pdata->name, data); |
| |
| if (err) { |
| dev_err(&pdev->dev, "error: irq %d\n", data->irq); |
| err = -EINVAL; |
| goto err_irq; |
| } |
| |
| goto out; |
| |
| err_irq: |
| extcon_dev_unregister(&data->edev); |
| out: |
| return err; |
| } |
| |
| static int __devexit adc_jack_remove(struct platform_device *pdev) |
| { |
| struct adc_jack_data *data = platform_get_drvdata(pdev); |
| |
| free_irq(data->irq, data); |
| cancel_work_sync(&data->handler.work); |
| extcon_dev_unregister(&data->edev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver adc_jack_driver = { |
| .probe = adc_jack_probe, |
| .remove = __devexit_p(adc_jack_remove), |
| .driver = { |
| .name = "adc-jack", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(adc_jack_driver); |