drivers/ata/sata_highbank.c - kernel/msm-4.19 - Gitiles

 /*
  * Calxeda Highbank AHCI SATA platform driver
  * Copyright 2012 Calxeda, Inc.
  *
  * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include "ahci.h"

 #define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
 #define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
 #define SERDES_CR_CTL			0x80a0
 #define SERDES_CR_ADDR			0x80a1
 #define SERDES_CR_DATA			0x80a2
 #define CR_BUSY				0x0001
 #define CR_START			0x0001
 #define CR_WR_RDN			0x0002
 #define CPHY_RX_INPUT_STS		0x2002
 #define CPHY_SATA_OVERRIDE	 	0x4000
 #define CPHY_OVERRIDE			0x2005
 #define SPHY_LANE			0x100
 #define SPHY_HALF_RATE			0x0001
 #define CPHY_SATA_DPLL_MODE		0x0700
 #define CPHY_SATA_DPLL_SHIFT		8
 #define CPHY_SATA_DPLL_RESET		(1 << 11)
 #define CPHY_PHY_COUNT			6
 #define CPHY_LANE_COUNT			4
 #define CPHY_PORT_COUNT			(CPHY_PHY_COUNT * CPHY_LANE_COUNT)

 static DEFINE_SPINLOCK(cphy_lock);
 /* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
  * sata ports to their phys and then to their lanes within the phys
  */
 struct phy_lane_info {
 	void __iomem *phy_base;
 	u8 lane_mapping;
 	u8 phy_devs;
 };
 static struct phy_lane_info port_data[CPHY_PORT_COUNT];

 static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
 {
 	u32 data;
 	u8 dev = port_data[sata_port].phy_devs;
 	spin_lock(&cphy_lock);
 	writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
 	data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
 	spin_unlock(&cphy_lock);
 	return data;
 }

 static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
 {
 	u8 dev = port_data[sata_port].phy_devs;
 	spin_lock(&cphy_lock);
 	writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
 	writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
 	spin_unlock(&cphy_lock);
 }

 static void combo_phy_wait_for_ready(u8 sata_port)
 {
 	while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
 		udelay(5);
 }

 static u32 combo_phy_read(u8 sata_port, u32 addr)
 {
 	combo_phy_wait_for_ready(sata_port);
 	__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
 	__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
 	combo_phy_wait_for_ready(sata_port);
 	return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
 }

 static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
 {
 	combo_phy_wait_for_ready(sata_port);
 	__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
 	__combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
 	__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START);
 }

 static void highbank_cphy_disable_overrides(u8 sata_port)
 {
 	u8 lane = port_data[sata_port].lane_mapping;
 	u32 tmp;
 	if (unlikely(port_data[sata_port].phy_base == NULL))
 		return;
 	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
 	tmp &= ~CPHY_SATA_OVERRIDE;
 	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
 }

 static void cphy_override_rx_mode(u8 sata_port, u32 val)
 {
 	u8 lane = port_data[sata_port].lane_mapping;
 	u32 tmp;
 	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
 	tmp &= ~CPHY_SATA_OVERRIDE;
 	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

 	tmp |= CPHY_SATA_OVERRIDE;
 	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

 	tmp &= ~CPHY_SATA_DPLL_MODE;
 	tmp |= val << CPHY_SATA_DPLL_SHIFT;
 	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

 	tmp |= CPHY_SATA_DPLL_RESET;
 	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

 	tmp &= ~CPHY_SATA_DPLL_RESET;
 	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

 	msleep(15);
 }

 static void highbank_cphy_override_lane(u8 sata_port)
 {
 	u8 lane = port_data[sata_port].lane_mapping;
 	u32 tmp, k = 0;

 	if (unlikely(port_data[sata_port].phy_base == NULL))
 		return;
 	do {
 		tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
 						lane * SPHY_LANE);
 	} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
 	cphy_override_rx_mode(sata_port, 3);
 }

 static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
 {
 	struct device_node *sata_node = dev->of_node;
 	int phy_count = 0, phy, port = 0;
 	void __iomem *cphy_base[CPHY_PHY_COUNT];
 	struct device_node *phy_nodes[CPHY_PHY_COUNT];
 	memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
 	memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT);

 	do {
 		u32 tmp;
 		struct of_phandle_args phy_data;
 		if (of_parse_phandle_with_args(sata_node,
 				"calxeda,port-phys", "#phy-cells",
 				port, &phy_data))
 			break;
 		for (phy = 0; phy < phy_count; phy++) {
 			if (phy_nodes[phy] == phy_data.np)
 				break;
 		}
 		if (phy_nodes[phy] == NULL) {
 			phy_nodes[phy] = phy_data.np;
 			cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
 			if (cphy_base[phy] == NULL) {
 				return 0;
 			}
 			phy_count += 1;
 		}
 		port_data[port].lane_mapping = phy_data.args[0];
 		of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
 		port_data[port].phy_devs = tmp;
 		port_data[port].phy_base = cphy_base[phy];
 		of_node_put(phy_data.np);
 		port += 1;
 	} while (port < CPHY_PORT_COUNT);
 	return 0;
 }

 static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
 				unsigned long deadline)
 {
 	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
 	struct ata_port *ap = link->ap;
 	struct ahci_port_priv *pp = ap->private_data;
 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
 	struct ata_taskfile tf;
 	bool online;
 	u32 sstatus;
 	int rc;
 	int retry = 10;

 	ahci_stop_engine(ap);

 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(link->device, &tf);
 	tf.command = ATA_BUSY;
 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);

 	do {
 		highbank_cphy_disable_overrides(link->ap->port_no);
 		rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
 		highbank_cphy_override_lane(link->ap->port_no);

 		/* If the status is 1, we are connected, but the link did not
 		 * come up. So retry resetting the link again.
 		 */
 		if (sata_scr_read(link, SCR_STATUS, &sstatus))
 			break;
 		if (!(sstatus & 0x3))
 			break;
 	} while (!online && retry--);

 	ahci_start_engine(ap);

 	if (online)
 		*class = ahci_dev_classify(ap);

 	return rc;
 }

 static struct ata_port_operations ahci_highbank_ops = {
 	.inherits		= &ahci_ops,
 	.hardreset		= ahci_highbank_hardreset,
 };

 static const struct ata_port_info ahci_highbank_port_info = {
 	.flags          = AHCI_FLAG_COMMON,
 	.pio_mask       = ATA_PIO4,
 	.udma_mask      = ATA_UDMA6,
 	.port_ops       = &ahci_highbank_ops,
 };

 static struct scsi_host_template ahci_highbank_platform_sht = {
 	AHCI_SHT("highbank-ahci"),
 };

 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "calxeda,hb-ahci" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);

 static int __devinit ahci_highbank_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;
 	struct resource *mem;
 	int irq;
 	int n_ports;
 	int i;
 	int rc;
 	struct ata_port_info pi = ahci_highbank_port_info;
 	const struct ata_port_info *ppi[] = { &pi, NULL };

 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
 		dev_err(dev, "no mmio space\n");
 		return -EINVAL;
 	}

 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
 		dev_err(dev, "no irq\n");
 		return -EINVAL;
 	}

 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv) {
 		dev_err(dev, "can't alloc ahci_host_priv\n");
 		return -ENOMEM;
 	}

 	hpriv->flags |= (unsigned long)pi.private_data;

 	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
 	if (!hpriv->mmio) {
 		dev_err(dev, "can't map %pR\n", mem);
 		return -ENOMEM;
 	}

 	rc = highbank_initialize_phys(dev, hpriv->mmio);
 	if (rc)
 		return rc;


 	ahci_save_initial_config(dev, hpriv, 0, 0);

 	/* prepare host */
 	if (hpriv->cap & HOST_CAP_NCQ)
 		pi.flags |= ATA_FLAG_NCQ;

 	if (hpriv->cap & HOST_CAP_PMP)
 		pi.flags |= ATA_FLAG_PMP;

 	ahci_set_em_messages(hpriv, &pi);

 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
 	 * both CAP.NP and port_map.
 	 */
 	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));

 	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
 	if (!host) {
 		rc = -ENOMEM;
 		goto err0;
 	}

 	host->private_data = hpriv;

 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;

 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);

 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];

 		ata_port_desc(ap, "mmio %pR", mem);
 		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);

 		/* set enclosure management message type */
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;

 		/* disabled/not-implemented port */
 		if (!(hpriv->port_map & (1 << i)))
 			ap->ops = &ata_dummy_port_ops;
 	}

 	rc = ahci_reset_controller(host);
 	if (rc)
 		goto err0;

 	ahci_init_controller(host);
 	ahci_print_info(host, "platform");

 	rc = ata_host_activate(host, irq, ahci_interrupt, 0,
 					&ahci_highbank_platform_sht);
 	if (rc)
 		goto err0;

 	return 0;
 err0:
 	return rc;
 }

 #ifdef CONFIG_PM_SLEEP
 static int ahci_highbank_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	void __iomem *mmio = hpriv->mmio;
 	u32 ctl;
 	int rc;

 	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
 		dev_err(dev, "firmware update required for suspend/resume\n");
 		return -EIO;
 	}

 	/*
 	 * AHCI spec rev1.1 section 8.3.3:
 	 * Software must disable interrupts prior to requesting a
 	 * transition of the HBA to D3 state.
 	 */
 	ctl = readl(mmio + HOST_CTL);
 	ctl &= ~HOST_IRQ_EN;
 	writel(ctl, mmio + HOST_CTL);
 	readl(mmio + HOST_CTL); /* flush */

 	rc = ata_host_suspend(host, PMSG_SUSPEND);
 	if (rc)
 		return rc;

 	return 0;
 }

 static int ahci_highbank_resume(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	int rc;

 	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
 		rc = ahci_reset_controller(host);
 		if (rc)
 			return rc;

 		ahci_init_controller(host);
 	}

 	ata_host_resume(host);

 	return 0;
 }
 #endif

 SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
 		  ahci_highbank_suspend, ahci_highbank_resume);

 static struct platform_driver ahci_highbank_driver = {
 	.remove = ata_platform_remove_one,
         .driver = {
                 .name = "highbank-ahci",
                 .owner = THIS_MODULE,
                 .of_match_table = ahci_of_match,
                 .pm = &ahci_highbank_pm_ops,
         },
 	.probe = ahci_highbank_probe,
 };

 module_platform_driver(ahci_highbank_driver);

 MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
 MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("sata:highbank");
	/*
	* Calxeda Highbank AHCI SATA platform driver
	* Copyright 2012 Calxeda, Inc.
	*
	* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program. If not, see <http://www.gnu.org/licenses/>.
	*/
	#include <linux/kernel.h>
	#include <linux/gfp.h>
	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/types.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/spinlock.h>
	#include <linux/device.h>
	#include <linux/of_device.h>
	#include <linux/of_address.h>
	#include <linux/platform_device.h>
	#include <linux/libata.h>
	#include <linux/ahci_platform.h>
	#include <linux/interrupt.h>
	#include <linux/delay.h>
	#include <linux/export.h>
	#include "ahci.h"

	#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) \| (((addr) >> 9) & 0x7f))
	#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
	#define SERDES_CR_CTL 0x80a0
	#define SERDES_CR_ADDR 0x80a1
	#define SERDES_CR_DATA 0x80a2
	#define CR_BUSY 0x0001
	#define CR_START 0x0001
	#define CR_WR_RDN 0x0002
	#define CPHY_RX_INPUT_STS 0x2002
	#define CPHY_SATA_OVERRIDE 0x4000
	#define CPHY_OVERRIDE 0x2005
	#define SPHY_LANE 0x100
	#define SPHY_HALF_RATE 0x0001
	#define CPHY_SATA_DPLL_MODE 0x0700
	#define CPHY_SATA_DPLL_SHIFT 8
	#define CPHY_SATA_DPLL_RESET (1 << 11)
	#define CPHY_PHY_COUNT 6
	#define CPHY_LANE_COUNT 4
	#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT)

	static DEFINE_SPINLOCK(cphy_lock);
	/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
	* sata ports to their phys and then to their lanes within the phys
	*/
	struct phy_lane_info {
	void __iomem *phy_base;
	u8 lane_mapping;
	u8 phy_devs;
	};
	static struct phy_lane_info port_data[CPHY_PORT_COUNT];

	static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
	{
	u32 data;
	u8 dev = port_data[sata_port].phy_devs;
	spin_lock(&cphy_lock);
	writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
	data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
	spin_unlock(&cphy_lock);
	return data;
	}

	static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
	{
	u8 dev = port_data[sata_port].phy_devs;
	spin_lock(&cphy_lock);
	writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
	writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
	spin_unlock(&cphy_lock);
	}

	static void combo_phy_wait_for_ready(u8 sata_port)
	{
	while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
	udelay(5);
	}

	static u32 combo_phy_read(u8 sata_port, u32 addr)
	{
	combo_phy_wait_for_ready(sata_port);
	__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
	__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
	combo_phy_wait_for_ready(sata_port);
	return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
	}

	static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
	{
	combo_phy_wait_for_ready(sata_port);
	__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
	__combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
	__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN \| CR_START);
	}

	static void highbank_cphy_disable_overrides(u8 sata_port)
	{
	u8 lane = port_data[sata_port].lane_mapping;
	u32 tmp;
	if (unlikely(port_data[sata_port].phy_base == NULL))
	return;
	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
	tmp &= ~CPHY_SATA_OVERRIDE;
	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
	}

	static void cphy_override_rx_mode(u8 sata_port, u32 val)
	{
	u8 lane = port_data[sata_port].lane_mapping;
	u32 tmp;
	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
	tmp &= ~CPHY_SATA_OVERRIDE;
	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

	tmp \|= CPHY_SATA_OVERRIDE;
	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

	tmp &= ~CPHY_SATA_DPLL_MODE;
	tmp \|= val << CPHY_SATA_DPLL_SHIFT;
	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

	tmp \|= CPHY_SATA_DPLL_RESET;
	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

	tmp &= ~CPHY_SATA_DPLL_RESET;
	combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);

	msleep(15);
	}

	static void highbank_cphy_override_lane(u8 sata_port)
	{
	u8 lane = port_data[sata_port].lane_mapping;
	u32 tmp, k = 0;

	if (unlikely(port_data[sata_port].phy_base == NULL))
	return;
	do {
	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
	lane * SPHY_LANE);
	} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
	cphy_override_rx_mode(sata_port, 3);
	}

	static int highbank_initialize_phys(struct device dev, void __iomem addr)
	{
	struct device_node *sata_node = dev->of_node;
	int phy_count = 0, phy, port = 0;
	void __iomem *cphy_base[CPHY_PHY_COUNT];
	struct device_node *phy_nodes[CPHY_PHY_COUNT];
	memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
	memset(phy_nodes, 0, sizeof(struct device_node) CPHY_PHY_COUNT);

	do {
	u32 tmp;
	struct of_phandle_args phy_data;
	if (of_parse_phandle_with_args(sata_node,
	"calxeda,port-phys", "#phy-cells",
	port, &phy_data))
	break;
	for (phy = 0; phy < phy_count; phy++) {
	if (phy_nodes[phy] == phy_data.np)
	break;
	}
	if (phy_nodes[phy] == NULL) {
	phy_nodes[phy] = phy_data.np;
	cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
	if (cphy_base[phy] == NULL) {
	return 0;
	}
	phy_count += 1;
	}
	port_data[port].lane_mapping = phy_data.args[0];
	of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
	port_data[port].phy_devs = tmp;
	port_data[port].phy_base = cphy_base[phy];
	of_node_put(phy_data.np);
	port += 1;
	} while (port < CPHY_PORT_COUNT);
	return 0;
	}

	static int ahci_highbank_hardreset(struct ata_link link, unsigned int class,
	unsigned long deadline)
	{
	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
	struct ata_port *ap = link->ap;
	struct ahci_port_priv *pp = ap->private_data;
	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
	struct ata_taskfile tf;
	bool online;
	u32 sstatus;
	int rc;
	int retry = 10;

	ahci_stop_engine(ap);

	/* clear D2H reception area to properly wait for D2H FIS */
	ata_tf_init(link->device, &tf);
	tf.command = ATA_BUSY;
	ata_tf_to_fis(&tf, 0, 0, d2h_fis);

	do {
	highbank_cphy_disable_overrides(link->ap->port_no);
	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
	highbank_cphy_override_lane(link->ap->port_no);

	/* If the status is 1, we are connected, but the link did not
	* come up. So retry resetting the link again.
	*/
	if (sata_scr_read(link, SCR_STATUS, &sstatus))
	break;
	if (!(sstatus & 0x3))
	break;
	} while (!online && retry--);

	ahci_start_engine(ap);

	if (online)
	*class = ahci_dev_classify(ap);

	return rc;
	}

	static struct ata_port_operations ahci_highbank_ops = {
	.inherits = &ahci_ops,
	.hardreset = ahci_highbank_hardreset,
	};

	static const struct ata_port_info ahci_highbank_port_info = {
	.flags = AHCI_FLAG_COMMON,
	.pio_mask = ATA_PIO4,
	.udma_mask = ATA_UDMA6,
	.port_ops = &ahci_highbank_ops,
	};

	static struct scsi_host_template ahci_highbank_platform_sht = {
	AHCI_SHT("highbank-ahci"),
	};

	static const struct of_device_id ahci_of_match[] = {
	{ .compatible = "calxeda,hb-ahci" },
	{},
	};
	MODULE_DEVICE_TABLE(of, ahci_of_match);

	static int __devinit ahci_highbank_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct ahci_host_priv *hpriv;
	struct ata_host *host;
	struct resource *mem;
	int irq;
	int n_ports;
	int i;
	int rc;
	struct ata_port_info pi = ahci_highbank_port_info;
	const struct ata_port_info *ppi[] = { &pi, NULL };

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!mem) {
	dev_err(dev, "no mmio space\n");
	return -EINVAL;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq <= 0) {
	dev_err(dev, "no irq\n");
	return -EINVAL;
	}

	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
	if (!hpriv) {
	dev_err(dev, "can't alloc ahci_host_priv\n");
	return -ENOMEM;
	}

	hpriv->flags \|= (unsigned long)pi.private_data;

	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
	if (!hpriv->mmio) {
	dev_err(dev, "can't map %pR\n", mem);
	return -ENOMEM;
	}

	rc = highbank_initialize_phys(dev, hpriv->mmio);
	if (rc)
	return rc;


	ahci_save_initial_config(dev, hpriv, 0, 0);

	/* prepare host */
	if (hpriv->cap & HOST_CAP_NCQ)
	pi.flags \|= ATA_FLAG_NCQ;

	if (hpriv->cap & HOST_CAP_PMP)
	pi.flags \|= ATA_FLAG_PMP;

	ahci_set_em_messages(hpriv, &pi);

	/* CAP.NP sometimes indicate the index of the last enabled
	* port, at other times, that of the last possible port, so
	* determining the maximum port number requires looking at
	* both CAP.NP and port_map.
	*/
	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));

	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
	if (!host) {
	rc = -ENOMEM;
	goto err0;
	}

	host->private_data = hpriv;

	if (!(hpriv->cap & HOST_CAP_SSS) \|\| ahci_ignore_sss)
	host->flags \|= ATA_HOST_PARALLEL_SCAN;

	if (pi.flags & ATA_FLAG_EM)
	ahci_reset_em(host);

	for (i = 0; i < host->n_ports; i++) {
	struct ata_port *ap = host->ports[i];

	ata_port_desc(ap, "mmio %pR", mem);
	ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);

	/* set enclosure management message type */
	if (ap->flags & ATA_FLAG_EM)
	ap->em_message_type = hpriv->em_msg_type;

	/* disabled/not-implemented port */
	if (!(hpriv->port_map & (1 << i)))
	ap->ops = &ata_dummy_port_ops;
	}

	rc = ahci_reset_controller(host);
	if (rc)
	goto err0;

	ahci_init_controller(host);
	ahci_print_info(host, "platform");

	rc = ata_host_activate(host, irq, ahci_interrupt, 0,
	&ahci_highbank_platform_sht);
	if (rc)
	goto err0;

	return 0;
	err0:
	return rc;
	}

	#ifdef CONFIG_PM_SLEEP
	static int ahci_highbank_suspend(struct device *dev)
	{
	struct ata_host *host = dev_get_drvdata(dev);
	struct ahci_host_priv *hpriv = host->private_data;
	void __iomem *mmio = hpriv->mmio;
	u32 ctl;
	int rc;

	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
	dev_err(dev, "firmware update required for suspend/resume\n");
	return -EIO;
	}

	/*
	* AHCI spec rev1.1 section 8.3.3:
	* Software must disable interrupts prior to requesting a
	* transition of the HBA to D3 state.
	*/
	ctl = readl(mmio + HOST_CTL);
	ctl &= ~HOST_IRQ_EN;
	writel(ctl, mmio + HOST_CTL);
	readl(mmio + HOST_CTL); /* flush */

	rc = ata_host_suspend(host, PMSG_SUSPEND);
	if (rc)
	return rc;

	return 0;
	}

	static int ahci_highbank_resume(struct device *dev)
	{
	struct ata_host *host = dev_get_drvdata(dev);
	int rc;

	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
	rc = ahci_reset_controller(host);
	if (rc)
	return rc;

	ahci_init_controller(host);
	}

	ata_host_resume(host);

	return 0;
	}
	#endif

	SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
	ahci_highbank_suspend, ahci_highbank_resume);

	static struct platform_driver ahci_highbank_driver = {
	.remove = ata_platform_remove_one,
	.driver = {
	.name = "highbank-ahci",
	.owner = THIS_MODULE,
	.of_match_table = ahci_of_match,
	.pm = &ahci_highbank_pm_ops,
	},
	.probe = ahci_highbank_probe,
	};

	module_platform_driver(ahci_highbank_driver);

	MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
	MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("sata:highbank");