| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. |
| */ |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/cpu.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqchip/mips-gic.h> |
| #include <linux/notifier.h> |
| #include <linux/of_irq.h> |
| #include <linux/percpu.h> |
| #include <linux/smp.h> |
| #include <linux/time.h> |
| |
| static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device); |
| static int gic_timer_irq; |
| static unsigned int gic_frequency; |
| |
| static int gic_next_event(unsigned long delta, struct clock_event_device *evt) |
| { |
| u64 cnt; |
| int res; |
| |
| cnt = gic_read_count(); |
| cnt += (u64)delta; |
| gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask)); |
| res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0; |
| return res; |
| } |
| |
| static irqreturn_t gic_compare_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *cd = dev_id; |
| |
| gic_write_compare(gic_read_compare()); |
| cd->event_handler(cd); |
| return IRQ_HANDLED; |
| } |
| |
| struct irqaction gic_compare_irqaction = { |
| .handler = gic_compare_interrupt, |
| .percpu_dev_id = &gic_clockevent_device, |
| .flags = IRQF_PERCPU | IRQF_TIMER, |
| .name = "timer", |
| }; |
| |
| static void gic_clockevent_cpu_init(unsigned int cpu, |
| struct clock_event_device *cd) |
| { |
| cd->name = "MIPS GIC"; |
| cd->features = CLOCK_EVT_FEAT_ONESHOT | |
| CLOCK_EVT_FEAT_C3STOP; |
| |
| cd->rating = 350; |
| cd->irq = gic_timer_irq; |
| cd->cpumask = cpumask_of(cpu); |
| cd->set_next_event = gic_next_event; |
| |
| clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff); |
| |
| enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE); |
| } |
| |
| static void gic_clockevent_cpu_exit(struct clock_event_device *cd) |
| { |
| disable_percpu_irq(gic_timer_irq); |
| } |
| |
| static void gic_update_frequency(void *data) |
| { |
| unsigned long rate = (unsigned long)data; |
| |
| clockevents_update_freq(this_cpu_ptr(&gic_clockevent_device), rate); |
| } |
| |
| static int gic_starting_cpu(unsigned int cpu) |
| { |
| gic_clockevent_cpu_init(cpu, this_cpu_ptr(&gic_clockevent_device)); |
| return 0; |
| } |
| |
| static int gic_clk_notifier(struct notifier_block *nb, unsigned long action, |
| void *data) |
| { |
| struct clk_notifier_data *cnd = data; |
| |
| if (action == POST_RATE_CHANGE) |
| on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1); |
| |
| return NOTIFY_OK; |
| } |
| |
| static int gic_dying_cpu(unsigned int cpu) |
| { |
| gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device)); |
| return 0; |
| } |
| |
| static struct notifier_block gic_clk_nb = { |
| .notifier_call = gic_clk_notifier, |
| }; |
| |
| static int gic_clockevent_init(void) |
| { |
| int ret; |
| |
| if (!gic_frequency) |
| return -ENXIO; |
| |
| ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction); |
| if (ret < 0) { |
| pr_err("GIC timer IRQ %d setup failed: %d\n", |
| gic_timer_irq, ret); |
| return ret; |
| } |
| |
| cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING, |
| "clockevents/mips/gic/timer:starting", |
| gic_starting_cpu, gic_dying_cpu); |
| return 0; |
| } |
| |
| static u64 gic_hpt_read(struct clocksource *cs) |
| { |
| return gic_read_count(); |
| } |
| |
| static struct clocksource gic_clocksource = { |
| .name = "GIC", |
| .read = gic_hpt_read, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| .archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC }, |
| }; |
| |
| static int __init __gic_clocksource_init(void) |
| { |
| int ret; |
| |
| /* Set clocksource mask. */ |
| gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width()); |
| |
| /* Calculate a somewhat reasonable rating value. */ |
| gic_clocksource.rating = 200 + gic_frequency / 10000000; |
| |
| ret = clocksource_register_hz(&gic_clocksource, gic_frequency); |
| if (ret < 0) |
| pr_warn("GIC: Unable to register clocksource\n"); |
| |
| return ret; |
| } |
| |
| static int __init gic_clocksource_of_init(struct device_node *node) |
| { |
| struct clk *clk; |
| int ret; |
| |
| if (!gic_present || !node->parent || |
| !of_device_is_compatible(node->parent, "mti,gic")) { |
| pr_warn("No DT definition for the mips gic driver\n"); |
| return -ENXIO; |
| } |
| |
| clk = of_clk_get(node, 0); |
| if (!IS_ERR(clk)) { |
| if (clk_prepare_enable(clk) < 0) { |
| pr_err("GIC failed to enable clock\n"); |
| clk_put(clk); |
| return PTR_ERR(clk); |
| } |
| |
| gic_frequency = clk_get_rate(clk); |
| } else if (of_property_read_u32(node, "clock-frequency", |
| &gic_frequency)) { |
| pr_err("GIC frequency not specified.\n"); |
| return -EINVAL;; |
| } |
| gic_timer_irq = irq_of_parse_and_map(node, 0); |
| if (!gic_timer_irq) { |
| pr_err("GIC timer IRQ not specified.\n"); |
| return -EINVAL;; |
| } |
| |
| ret = __gic_clocksource_init(); |
| if (ret) |
| return ret; |
| |
| ret = gic_clockevent_init(); |
| if (!ret && !IS_ERR(clk)) { |
| if (clk_notifier_register(clk, &gic_clk_nb) < 0) |
| pr_warn("GIC: Unable to register clock notifier\n"); |
| } |
| |
| /* And finally start the counter */ |
| gic_start_count(); |
| |
| return 0; |
| } |
| TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer", |
| gic_clocksource_of_init); |