| /* |
| * Base driver for Maxim MAX8925 |
| * |
| * Copyright (C) 2009 Marvell International Ltd. |
| * Haojian Zhuang <haojian.zhuang@marvell.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/max8925.h> |
| |
| #define IRQ_MODE_STATUS 0 |
| #define IRQ_MODE_MASK 1 |
| |
| static struct resource backlight_resources[] = { |
| { |
| .name = "max8925-backlight", |
| .start = MAX8925_WLED_MODE_CNTL, |
| .end = MAX8925_WLED_CNTL, |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct mfd_cell backlight_devs[] = { |
| { |
| .name = "max8925-backlight", |
| .num_resources = 1, |
| .resources = &backlight_resources[0], |
| .id = -1, |
| }, |
| }; |
| |
| static struct resource touch_resources[] = { |
| { |
| .name = "max8925-tsc", |
| .start = MAX8925_TSC_IRQ, |
| .end = MAX8925_ADC_RES_END, |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct mfd_cell touch_devs[] = { |
| { |
| .name = "max8925-touch", |
| .num_resources = 1, |
| .resources = &touch_resources[0], |
| .id = -1, |
| }, |
| }; |
| |
| #define MAX8925_REG_RESOURCE(_start, _end) \ |
| { \ |
| .start = MAX8925_##_start, \ |
| .end = MAX8925_##_end, \ |
| .flags = IORESOURCE_IO, \ |
| } |
| |
| static struct resource regulator_resources[] = { |
| MAX8925_REG_RESOURCE(SDCTL1, SDCTL1), |
| MAX8925_REG_RESOURCE(SDCTL2, SDCTL2), |
| MAX8925_REG_RESOURCE(SDCTL3, SDCTL3), |
| MAX8925_REG_RESOURCE(LDOCTL1, LDOCTL1), |
| MAX8925_REG_RESOURCE(LDOCTL2, LDOCTL2), |
| MAX8925_REG_RESOURCE(LDOCTL3, LDOCTL3), |
| MAX8925_REG_RESOURCE(LDOCTL4, LDOCTL4), |
| MAX8925_REG_RESOURCE(LDOCTL5, LDOCTL5), |
| MAX8925_REG_RESOURCE(LDOCTL6, LDOCTL6), |
| MAX8925_REG_RESOURCE(LDOCTL7, LDOCTL7), |
| MAX8925_REG_RESOURCE(LDOCTL8, LDOCTL8), |
| MAX8925_REG_RESOURCE(LDOCTL9, LDOCTL9), |
| MAX8925_REG_RESOURCE(LDOCTL10, LDOCTL10), |
| MAX8925_REG_RESOURCE(LDOCTL11, LDOCTL11), |
| MAX8925_REG_RESOURCE(LDOCTL12, LDOCTL12), |
| MAX8925_REG_RESOURCE(LDOCTL13, LDOCTL13), |
| MAX8925_REG_RESOURCE(LDOCTL14, LDOCTL14), |
| MAX8925_REG_RESOURCE(LDOCTL15, LDOCTL15), |
| MAX8925_REG_RESOURCE(LDOCTL16, LDOCTL16), |
| MAX8925_REG_RESOURCE(LDOCTL17, LDOCTL17), |
| MAX8925_REG_RESOURCE(LDOCTL18, LDOCTL18), |
| MAX8925_REG_RESOURCE(LDOCTL19, LDOCTL19), |
| MAX8925_REG_RESOURCE(LDOCTL20, LDOCTL20), |
| }; |
| |
| #define MAX8925_REG_DEVS(_id) \ |
| { \ |
| .name = "max8925-regulator", \ |
| .num_resources = 1, \ |
| .resources = ®ulator_resources[MAX8925_ID_##_id], \ |
| .id = MAX8925_ID_##_id, \ |
| } |
| |
| static struct mfd_cell regulator_devs[] = { |
| MAX8925_REG_DEVS(SD1), |
| MAX8925_REG_DEVS(SD2), |
| MAX8925_REG_DEVS(SD3), |
| MAX8925_REG_DEVS(LDO1), |
| MAX8925_REG_DEVS(LDO2), |
| MAX8925_REG_DEVS(LDO3), |
| MAX8925_REG_DEVS(LDO4), |
| MAX8925_REG_DEVS(LDO5), |
| MAX8925_REG_DEVS(LDO6), |
| MAX8925_REG_DEVS(LDO7), |
| MAX8925_REG_DEVS(LDO8), |
| MAX8925_REG_DEVS(LDO9), |
| MAX8925_REG_DEVS(LDO10), |
| MAX8925_REG_DEVS(LDO11), |
| MAX8925_REG_DEVS(LDO12), |
| MAX8925_REG_DEVS(LDO13), |
| MAX8925_REG_DEVS(LDO14), |
| MAX8925_REG_DEVS(LDO15), |
| MAX8925_REG_DEVS(LDO16), |
| MAX8925_REG_DEVS(LDO17), |
| MAX8925_REG_DEVS(LDO18), |
| MAX8925_REG_DEVS(LDO19), |
| MAX8925_REG_DEVS(LDO20), |
| }; |
| |
| static int __get_irq_offset(struct max8925_chip *chip, int irq, int mode, |
| int *offset, int *bit) |
| { |
| if (!offset || !bit) |
| return -EINVAL; |
| |
| switch (chip->chip_id) { |
| case MAX8925_GPM: |
| *bit = irq % BITS_PER_BYTE; |
| if (irq < (BITS_PER_BYTE << 1)) { /* irq = [0,15] */ |
| *offset = (mode) ? MAX8925_CHG_IRQ1_MASK |
| : MAX8925_CHG_IRQ1; |
| if (irq >= BITS_PER_BYTE) |
| (*offset)++; |
| } else { /* irq = [16,31] */ |
| *offset = (mode) ? MAX8925_ON_OFF_IRQ1_MASK |
| : MAX8925_ON_OFF_IRQ1; |
| if (irq >= (BITS_PER_BYTE * 3)) |
| (*offset)++; |
| } |
| break; |
| case MAX8925_ADC: |
| *bit = irq % BITS_PER_BYTE; |
| *offset = (mode) ? MAX8925_TSC_IRQ_MASK : MAX8925_TSC_IRQ; |
| break; |
| default: |
| goto out; |
| } |
| return 0; |
| out: |
| dev_err(chip->dev, "Wrong irq #%d is assigned\n", irq); |
| return -EINVAL; |
| } |
| |
| static int __check_irq(int irq) |
| { |
| if ((irq < 0) || (irq >= MAX8925_NUM_IRQ)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| int max8925_mask_irq(struct max8925_chip *chip, int irq) |
| { |
| int offset, bit, ret; |
| |
| ret = __get_irq_offset(chip, irq, IRQ_MODE_MASK, &offset, &bit); |
| if (ret < 0) |
| return ret; |
| ret = max8925_set_bits(chip->i2c, offset, 1 << bit, 1 << bit); |
| return ret; |
| } |
| |
| int max8925_unmask_irq(struct max8925_chip *chip, int irq) |
| { |
| int offset, bit, ret; |
| |
| ret = __get_irq_offset(chip, irq, IRQ_MODE_MASK, &offset, &bit); |
| if (ret < 0) |
| return ret; |
| ret = max8925_set_bits(chip->i2c, offset, 1 << bit, 0); |
| return ret; |
| } |
| |
| #define INT_STATUS_NUM (MAX8925_NUM_IRQ / BITS_PER_BYTE) |
| |
| static irqreturn_t max8925_irq_thread(int irq, void *data) |
| { |
| struct max8925_chip *chip = data; |
| unsigned long irq_status[INT_STATUS_NUM]; |
| unsigned char status_buf[INT_STATUS_NUM << 1]; |
| int i, ret; |
| |
| memset(irq_status, 0, sizeof(unsigned long) * INT_STATUS_NUM); |
| |
| /* all these interrupt status registers are read-only */ |
| switch (chip->chip_id) { |
| case MAX8925_GPM: |
| ret = max8925_bulk_read(chip->i2c, MAX8925_CHG_IRQ1, |
| 4, status_buf); |
| if (ret < 0) |
| goto out; |
| ret = max8925_bulk_read(chip->i2c, MAX8925_ON_OFF_IRQ1, |
| 2, &status_buf[4]); |
| if (ret < 0) |
| goto out; |
| ret = max8925_bulk_read(chip->i2c, MAX8925_ON_OFF_IRQ2, |
| 2, &status_buf[6]); |
| if (ret < 0) |
| goto out; |
| /* clear masked interrupt status */ |
| status_buf[0] &= (~status_buf[2] & CHG_IRQ1_MASK); |
| irq_status[0] |= status_buf[0]; |
| status_buf[1] &= (~status_buf[3] & CHG_IRQ2_MASK); |
| irq_status[0] |= (status_buf[1] << BITS_PER_BYTE); |
| status_buf[4] &= (~status_buf[5] & ON_OFF_IRQ1_MASK); |
| irq_status[0] |= (status_buf[4] << (BITS_PER_BYTE * 2)); |
| status_buf[6] &= (~status_buf[7] & ON_OFF_IRQ2_MASK); |
| irq_status[0] |= (status_buf[6] << (BITS_PER_BYTE * 3)); |
| break; |
| case MAX8925_ADC: |
| ret = max8925_bulk_read(chip->i2c, MAX8925_TSC_IRQ, |
| 2, status_buf); |
| if (ret < 0) |
| goto out; |
| /* clear masked interrupt status */ |
| status_buf[0] &= (~status_buf[1] & TSC_IRQ_MASK); |
| irq_status[0] |= status_buf[0]; |
| break; |
| default: |
| goto out; |
| } |
| |
| for_each_bit(i, &irq_status[0], MAX8925_NUM_IRQ) { |
| clear_bit(i, irq_status); |
| dev_dbg(chip->dev, "Servicing IRQ #%d in %s\n", i, chip->name); |
| |
| mutex_lock(&chip->irq_lock); |
| if (chip->irq[i].handler) |
| chip->irq[i].handler(i, chip->irq[i].data); |
| else { |
| max8925_mask_irq(chip, i); |
| dev_err(chip->dev, "Noboday cares IRQ #%d in %s. " |
| "Now mask it.\n", i, chip->name); |
| } |
| mutex_unlock(&chip->irq_lock); |
| } |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| int max8925_request_irq(struct max8925_chip *chip, int irq, |
| irq_handler_t handler, void *data) |
| { |
| if ((__check_irq(irq) < 0) || !handler) |
| return -EINVAL; |
| |
| mutex_lock(&chip->irq_lock); |
| chip->irq[irq].handler = handler; |
| chip->irq[irq].data = data; |
| mutex_unlock(&chip->irq_lock); |
| return 0; |
| } |
| EXPORT_SYMBOL(max8925_request_irq); |
| |
| int max8925_free_irq(struct max8925_chip *chip, int irq) |
| { |
| if (__check_irq(irq) < 0) |
| return -EINVAL; |
| |
| mutex_lock(&chip->irq_lock); |
| chip->irq[irq].handler = NULL; |
| chip->irq[irq].data = NULL; |
| mutex_unlock(&chip->irq_lock); |
| return 0; |
| } |
| EXPORT_SYMBOL(max8925_free_irq); |
| |
| static int __devinit device_gpm_init(struct max8925_chip *chip, |
| struct i2c_client *i2c, |
| struct max8925_platform_data *pdata) |
| { |
| int ret; |
| |
| /* mask all IRQs */ |
| ret = max8925_set_bits(i2c, MAX8925_CHG_IRQ1_MASK, 0x7, 0x7); |
| if (ret < 0) |
| goto out; |
| ret = max8925_set_bits(i2c, MAX8925_CHG_IRQ2_MASK, 0xff, 0xff); |
| if (ret < 0) |
| goto out; |
| ret = max8925_set_bits(i2c, MAX8925_ON_OFF_IRQ1_MASK, 0xff, 0xff); |
| if (ret < 0) |
| goto out; |
| ret = max8925_set_bits(i2c, MAX8925_ON_OFF_IRQ2_MASK, 0x3, 0x3); |
| if (ret < 0) |
| goto out; |
| |
| chip->name = "GPM"; |
| memset(chip->irq, 0, sizeof(struct max8925_irq) * MAX8925_NUM_IRQ); |
| ret = request_threaded_irq(i2c->irq, NULL, max8925_irq_thread, |
| IRQF_ONESHOT | IRQF_TRIGGER_LOW, |
| "max8925-gpm", chip); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to request IRQ #%d.\n", i2c->irq); |
| goto out; |
| } |
| chip->chip_irq = i2c->irq; |
| |
| /* enable hard-reset for ONKEY power-off */ |
| max8925_set_bits(i2c, MAX8925_SYSENSEL, 0x80, 0x80); |
| |
| ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0], |
| ARRAY_SIZE(regulator_devs), |
| ®ulator_resources[0], 0); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to add regulator subdev\n"); |
| goto out_irq; |
| } |
| |
| if (pdata && pdata->backlight) { |
| ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0], |
| ARRAY_SIZE(backlight_devs), |
| &backlight_resources[0], 0); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to add backlight subdev\n"); |
| goto out_dev; |
| } |
| } |
| return 0; |
| out_dev: |
| mfd_remove_devices(chip->dev); |
| out_irq: |
| if (chip->chip_irq) |
| free_irq(chip->chip_irq, chip); |
| out: |
| return ret; |
| } |
| |
| static int __devinit device_adc_init(struct max8925_chip *chip, |
| struct i2c_client *i2c, |
| struct max8925_platform_data *pdata) |
| { |
| int ret; |
| |
| /* mask all IRQs */ |
| ret = max8925_set_bits(i2c, MAX8925_TSC_IRQ_MASK, 3, 3); |
| |
| chip->name = "ADC"; |
| memset(chip->irq, 0, sizeof(struct max8925_irq) * MAX8925_NUM_IRQ); |
| ret = request_threaded_irq(i2c->irq, NULL, max8925_irq_thread, |
| IRQF_ONESHOT | IRQF_TRIGGER_LOW, |
| "max8925-adc", chip); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to request IRQ #%d.\n", i2c->irq); |
| goto out; |
| } |
| chip->chip_irq = i2c->irq; |
| |
| if (pdata && pdata->touch) { |
| ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], |
| ARRAY_SIZE(touch_devs), |
| &touch_resources[0], 0); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to add touch subdev\n"); |
| goto out_irq; |
| } |
| } |
| return 0; |
| out_irq: |
| if (chip->chip_irq) |
| free_irq(chip->chip_irq, chip); |
| out: |
| return ret; |
| } |
| |
| int __devinit max8925_device_init(struct max8925_chip *chip, |
| struct max8925_platform_data *pdata) |
| { |
| switch (chip->chip_id) { |
| case MAX8925_GPM: |
| device_gpm_init(chip, chip->i2c, pdata); |
| break; |
| case MAX8925_ADC: |
| device_adc_init(chip, chip->i2c, pdata); |
| break; |
| } |
| return 0; |
| } |
| |
| void max8925_device_exit(struct max8925_chip *chip) |
| { |
| if (chip->chip_irq >= 0) |
| free_irq(chip->chip_irq, chip); |
| mfd_remove_devices(chip->dev); |
| } |
| |
| MODULE_DESCRIPTION("PMIC Driver for Maxim MAX8925"); |
| MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com"); |
| MODULE_LICENSE("GPL"); |