| /* |
| * PowerNV OPAL high level interfaces |
| * |
| * Copyright 2011 IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/types.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/interrupt.h> |
| #include <linux/notifier.h> |
| #include <linux/slab.h> |
| #include <asm/opal.h> |
| #include <asm/firmware.h> |
| |
| #include "powernv.h" |
| |
| struct opal { |
| u64 base; |
| u64 entry; |
| } opal; |
| |
| static struct device_node *opal_node; |
| static DEFINE_SPINLOCK(opal_write_lock); |
| extern u64 opal_mc_secondary_handler[]; |
| static unsigned int *opal_irqs; |
| static unsigned int opal_irq_count; |
| static ATOMIC_NOTIFIER_HEAD(opal_notifier_head); |
| static DEFINE_SPINLOCK(opal_notifier_lock); |
| static uint64_t last_notified_mask = 0x0ul; |
| static atomic_t opal_notifier_hold = ATOMIC_INIT(0); |
| |
| int __init early_init_dt_scan_opal(unsigned long node, |
| const char *uname, int depth, void *data) |
| { |
| const void *basep, *entryp; |
| unsigned long basesz, entrysz; |
| |
| if (depth != 1 || strcmp(uname, "ibm,opal") != 0) |
| return 0; |
| |
| basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz); |
| entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz); |
| |
| if (!basep || !entryp) |
| return 1; |
| |
| opal.base = of_read_number(basep, basesz/4); |
| opal.entry = of_read_number(entryp, entrysz/4); |
| |
| pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%ld)\n", |
| opal.base, basep, basesz); |
| pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%ld)\n", |
| opal.entry, entryp, entrysz); |
| |
| powerpc_firmware_features |= FW_FEATURE_OPAL; |
| if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { |
| powerpc_firmware_features |= FW_FEATURE_OPALv2; |
| powerpc_firmware_features |= FW_FEATURE_OPALv3; |
| printk("OPAL V3 detected !\n"); |
| } else if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { |
| powerpc_firmware_features |= FW_FEATURE_OPALv2; |
| printk("OPAL V2 detected !\n"); |
| } else { |
| printk("OPAL V1 detected !\n"); |
| } |
| |
| return 1; |
| } |
| |
| static int __init opal_register_exception_handlers(void) |
| { |
| u64 glue; |
| |
| if (!(powerpc_firmware_features & FW_FEATURE_OPAL)) |
| return -ENODEV; |
| |
| /* Hookup some exception handlers. We use the fwnmi area at 0x7000 |
| * to provide the glue space to OPAL |
| */ |
| glue = 0x7000; |
| opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER, |
| __pa(opal_mc_secondary_handler[0]), |
| glue); |
| glue += 128; |
| opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER, |
| 0, glue); |
| glue += 128; |
| opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue); |
| |
| return 0; |
| } |
| |
| early_initcall(opal_register_exception_handlers); |
| |
| int opal_notifier_register(struct notifier_block *nb) |
| { |
| if (!nb) { |
| pr_warning("%s: Invalid argument (%p)\n", |
| __func__, nb); |
| return -EINVAL; |
| } |
| |
| atomic_notifier_chain_register(&opal_notifier_head, nb); |
| return 0; |
| } |
| |
| static void opal_do_notifier(uint64_t events) |
| { |
| unsigned long flags; |
| uint64_t changed_mask; |
| |
| if (atomic_read(&opal_notifier_hold)) |
| return; |
| |
| spin_lock_irqsave(&opal_notifier_lock, flags); |
| changed_mask = last_notified_mask ^ events; |
| last_notified_mask = events; |
| spin_unlock_irqrestore(&opal_notifier_lock, flags); |
| |
| /* |
| * We feed with the event bits and changed bits for |
| * enough information to the callback. |
| */ |
| atomic_notifier_call_chain(&opal_notifier_head, |
| events, (void *)changed_mask); |
| } |
| |
| void opal_notifier_update_evt(uint64_t evt_mask, |
| uint64_t evt_val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&opal_notifier_lock, flags); |
| last_notified_mask &= ~evt_mask; |
| last_notified_mask |= evt_val; |
| spin_unlock_irqrestore(&opal_notifier_lock, flags); |
| } |
| |
| void opal_notifier_enable(void) |
| { |
| int64_t rc; |
| uint64_t evt = 0; |
| |
| atomic_set(&opal_notifier_hold, 0); |
| |
| /* Process pending events */ |
| rc = opal_poll_events(&evt); |
| if (rc == OPAL_SUCCESS && evt) |
| opal_do_notifier(evt); |
| } |
| |
| void opal_notifier_disable(void) |
| { |
| atomic_set(&opal_notifier_hold, 1); |
| } |
| |
| int opal_get_chars(uint32_t vtermno, char *buf, int count) |
| { |
| s64 len, rc; |
| u64 evt; |
| |
| if (!opal.entry) |
| return -ENODEV; |
| opal_poll_events(&evt); |
| if ((evt & OPAL_EVENT_CONSOLE_INPUT) == 0) |
| return 0; |
| len = count; |
| rc = opal_console_read(vtermno, &len, buf); |
| if (rc == OPAL_SUCCESS) |
| return len; |
| return 0; |
| } |
| |
| int opal_put_chars(uint32_t vtermno, const char *data, int total_len) |
| { |
| int written = 0; |
| s64 len, rc; |
| unsigned long flags; |
| u64 evt; |
| |
| if (!opal.entry) |
| return -ENODEV; |
| |
| /* We want put_chars to be atomic to avoid mangling of hvsi |
| * packets. To do that, we first test for room and return |
| * -EAGAIN if there isn't enough. |
| * |
| * Unfortunately, opal_console_write_buffer_space() doesn't |
| * appear to work on opal v1, so we just assume there is |
| * enough room and be done with it |
| */ |
| spin_lock_irqsave(&opal_write_lock, flags); |
| if (firmware_has_feature(FW_FEATURE_OPALv2)) { |
| rc = opal_console_write_buffer_space(vtermno, &len); |
| if (rc || len < total_len) { |
| spin_unlock_irqrestore(&opal_write_lock, flags); |
| /* Closed -> drop characters */ |
| if (rc) |
| return total_len; |
| opal_poll_events(&evt); |
| return -EAGAIN; |
| } |
| } |
| |
| /* We still try to handle partial completions, though they |
| * should no longer happen. |
| */ |
| rc = OPAL_BUSY; |
| while(total_len > 0 && (rc == OPAL_BUSY || |
| rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { |
| len = total_len; |
| rc = opal_console_write(vtermno, &len, data); |
| |
| /* Closed or other error drop */ |
| if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && |
| rc != OPAL_BUSY_EVENT) { |
| written = total_len; |
| break; |
| } |
| if (rc == OPAL_SUCCESS) { |
| total_len -= len; |
| data += len; |
| written += len; |
| } |
| /* This is a bit nasty but we need that for the console to |
| * flush when there aren't any interrupts. We will clean |
| * things a bit later to limit that to synchronous path |
| * such as the kernel console and xmon/udbg |
| */ |
| do |
| opal_poll_events(&evt); |
| while(rc == OPAL_SUCCESS && (evt & OPAL_EVENT_CONSOLE_OUTPUT)); |
| } |
| spin_unlock_irqrestore(&opal_write_lock, flags); |
| return written; |
| } |
| |
| int opal_machine_check(struct pt_regs *regs) |
| { |
| struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt; |
| struct opal_machine_check_event evt; |
| const char *level, *sevstr, *subtype; |
| static const char *opal_mc_ue_types[] = { |
| "Indeterminate", |
| "Instruction fetch", |
| "Page table walk ifetch", |
| "Load/Store", |
| "Page table walk Load/Store", |
| }; |
| static const char *opal_mc_slb_types[] = { |
| "Indeterminate", |
| "Parity", |
| "Multihit", |
| }; |
| static const char *opal_mc_erat_types[] = { |
| "Indeterminate", |
| "Parity", |
| "Multihit", |
| }; |
| static const char *opal_mc_tlb_types[] = { |
| "Indeterminate", |
| "Parity", |
| "Multihit", |
| }; |
| |
| /* Copy the event structure and release the original */ |
| evt = *opal_evt; |
| opal_evt->in_use = 0; |
| |
| /* Print things out */ |
| if (evt.version != OpalMCE_V1) { |
| pr_err("Machine Check Exception, Unknown event version %d !\n", |
| evt.version); |
| return 0; |
| } |
| switch(evt.severity) { |
| case OpalMCE_SEV_NO_ERROR: |
| level = KERN_INFO; |
| sevstr = "Harmless"; |
| break; |
| case OpalMCE_SEV_WARNING: |
| level = KERN_WARNING; |
| sevstr = ""; |
| break; |
| case OpalMCE_SEV_ERROR_SYNC: |
| level = KERN_ERR; |
| sevstr = "Severe"; |
| break; |
| case OpalMCE_SEV_FATAL: |
| default: |
| level = KERN_ERR; |
| sevstr = "Fatal"; |
| break; |
| } |
| |
| printk("%s%s Machine check interrupt [%s]\n", level, sevstr, |
| evt.disposition == OpalMCE_DISPOSITION_RECOVERED ? |
| "Recovered" : "[Not recovered"); |
| printk("%s Initiator: %s\n", level, |
| evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown"); |
| switch(evt.error_type) { |
| case OpalMCE_ERROR_TYPE_UE: |
| subtype = evt.u.ue_error.ue_error_type < |
| ARRAY_SIZE(opal_mc_ue_types) ? |
| opal_mc_ue_types[evt.u.ue_error.ue_error_type] |
| : "Unknown"; |
| printk("%s Error type: UE [%s]\n", level, subtype); |
| if (evt.u.ue_error.effective_address_provided) |
| printk("%s Effective address: %016llx\n", |
| level, evt.u.ue_error.effective_address); |
| if (evt.u.ue_error.physical_address_provided) |
| printk("%s Physial address: %016llx\n", |
| level, evt.u.ue_error.physical_address); |
| break; |
| case OpalMCE_ERROR_TYPE_SLB: |
| subtype = evt.u.slb_error.slb_error_type < |
| ARRAY_SIZE(opal_mc_slb_types) ? |
| opal_mc_slb_types[evt.u.slb_error.slb_error_type] |
| : "Unknown"; |
| printk("%s Error type: SLB [%s]\n", level, subtype); |
| if (evt.u.slb_error.effective_address_provided) |
| printk("%s Effective address: %016llx\n", |
| level, evt.u.slb_error.effective_address); |
| break; |
| case OpalMCE_ERROR_TYPE_ERAT: |
| subtype = evt.u.erat_error.erat_error_type < |
| ARRAY_SIZE(opal_mc_erat_types) ? |
| opal_mc_erat_types[evt.u.erat_error.erat_error_type] |
| : "Unknown"; |
| printk("%s Error type: ERAT [%s]\n", level, subtype); |
| if (evt.u.erat_error.effective_address_provided) |
| printk("%s Effective address: %016llx\n", |
| level, evt.u.erat_error.effective_address); |
| break; |
| case OpalMCE_ERROR_TYPE_TLB: |
| subtype = evt.u.tlb_error.tlb_error_type < |
| ARRAY_SIZE(opal_mc_tlb_types) ? |
| opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type] |
| : "Unknown"; |
| printk("%s Error type: TLB [%s]\n", level, subtype); |
| if (evt.u.tlb_error.effective_address_provided) |
| printk("%s Effective address: %016llx\n", |
| level, evt.u.tlb_error.effective_address); |
| break; |
| default: |
| case OpalMCE_ERROR_TYPE_UNKNOWN: |
| printk("%s Error type: Unknown\n", level); |
| break; |
| } |
| return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1; |
| } |
| |
| static irqreturn_t opal_interrupt(int irq, void *data) |
| { |
| uint64_t events; |
| |
| opal_handle_interrupt(virq_to_hw(irq), &events); |
| |
| opal_do_notifier(events); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __init opal_init(void) |
| { |
| struct device_node *np, *consoles; |
| const __be32 *irqs; |
| int rc, i, irqlen; |
| |
| opal_node = of_find_node_by_path("/ibm,opal"); |
| if (!opal_node) { |
| pr_warn("opal: Node not found\n"); |
| return -ENODEV; |
| } |
| |
| /* Register OPAL consoles if any ports */ |
| if (firmware_has_feature(FW_FEATURE_OPALv2)) |
| consoles = of_find_node_by_path("/ibm,opal/consoles"); |
| else |
| consoles = of_node_get(opal_node); |
| if (consoles) { |
| for_each_child_of_node(consoles, np) { |
| if (strcmp(np->name, "serial")) |
| continue; |
| of_platform_device_create(np, NULL, NULL); |
| } |
| of_node_put(consoles); |
| } |
| |
| /* Find all OPAL interrupts and request them */ |
| irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); |
| pr_debug("opal: Found %d interrupts reserved for OPAL\n", |
| irqs ? (irqlen / 4) : 0); |
| opal_irq_count = irqlen / 4; |
| opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL); |
| for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) { |
| unsigned int hwirq = be32_to_cpup(irqs); |
| unsigned int irq = irq_create_mapping(NULL, hwirq); |
| if (irq == NO_IRQ) { |
| pr_warning("opal: Failed to map irq 0x%x\n", hwirq); |
| continue; |
| } |
| rc = request_irq(irq, opal_interrupt, 0, "opal", NULL); |
| if (rc) |
| pr_warning("opal: Error %d requesting irq %d" |
| " (0x%x)\n", rc, irq, hwirq); |
| opal_irqs[i] = irq; |
| } |
| return 0; |
| } |
| subsys_initcall(opal_init); |
| |
| void opal_shutdown(void) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < opal_irq_count; i++) { |
| if (opal_irqs[i]) |
| free_irq(opal_irqs[i], NULL); |
| opal_irqs[i] = 0; |
| } |
| } |