| /* $XFree86$ */ |
| /* $XdotOrg$ */ |
| /* |
| * Mode initializing code (CRT2 section) |
| * for SiS 300/305/540/630/730 and |
| * SiS 315/550/650/M650/651/661FX/M661xX/740/741(GX)/M741/330/660/M660/760/M760 |
| * (Universal module for Linux kernel framebuffer and XFree86/X.org 4.x) |
| * |
| * Copyright (C) 2001-2004 by Thomas Winischhofer, Vienna, Austria |
| * |
| * If distributed as part of the Linux kernel, the following license terms |
| * apply: |
| * |
| * * This program is free software; you can redistribute it and/or modify |
| * * it under the terms of the GNU General Public License as published by |
| * * the Free Software Foundation; either version 2 of the named License, |
| * * or any later version. |
| * * |
| * * This program is distributed in the hope that it will be useful, |
| * * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * * GNU General Public License for more details. |
| * * |
| * * You should have received a copy of the GNU General Public License |
| * * along with this program; if not, write to the Free Software |
| * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA |
| * |
| * Otherwise, the following license terms apply: |
| * |
| * * Redistribution and use in source and binary forms, with or without |
| * * modification, are permitted provided that the following conditions |
| * * are met: |
| * * 1) Redistributions of source code must retain the above copyright |
| * * notice, this list of conditions and the following disclaimer. |
| * * 2) Redistributions in binary form must reproduce the above copyright |
| * * notice, this list of conditions and the following disclaimer in the |
| * * documentation and/or other materials provided with the distribution. |
| * * 3) The name of the author may not be used to endorse or promote products |
| * * derived from this software without specific prior written permission. |
| * * |
| * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR |
| * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Author: Thomas Winischhofer <thomas@winischhofer.net> |
| * |
| * Formerly based on non-functional code-fragements for 300 series by SiS, Inc. |
| * Used by permission. |
| * |
| * TW says: This code looks awful, I know. But please don't do anything about |
| * this otherwise debugging will be hell. |
| * The code is extremely fragile as regards the different chipsets, different |
| * video bridges and combinations thereof. If anything is changed, extreme |
| * care has to be taken that that change doesn't break it for other chipsets, |
| * bridges or combinations thereof. |
| * All comments in this file are by me, regardless if marked TW or not. |
| * |
| */ |
| |
| #if 1 |
| #define SET_EMI /* 302LV/ELV: Set EMI values */ |
| #endif |
| |
| #define COMPAL_HACK /* Needed for Compal 1400x1050 (EMI) */ |
| #define COMPAQ_HACK /* Needed for Inventec/Compaq 1280x1024 (EMI) */ |
| #define ASUS_HACK /* Needed for Asus A2H 1024x768 (EMI) */ |
| |
| #include "init301.h" |
| |
| #ifdef SIS300 |
| #include "oem300.h" |
| #endif |
| |
| #ifdef SIS315H |
| #include "oem310.h" |
| #endif |
| |
| #define SiS_I2CDELAY 1000 |
| #define SiS_I2CDELAYSHORT 150 |
| |
| static USHORT SiS_GetBIOSLCDResInfo(SiS_Private *SiS_Pr); |
| |
| /*********************************************/ |
| /* HELPER: Lock/Unlock CRT2 */ |
| /*********************************************/ |
| |
| void |
| SiS_UnLockCRT2(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if(HwInfo->jChipType >= SIS_315H) |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2f,0x01); |
| else |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24,0x01); |
| } |
| |
| void |
| SiS_LockCRT2(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if(HwInfo->jChipType >= SIS_315H) |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2F,0xFE); |
| else |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x24,0xFE); |
| } |
| |
| /*********************************************/ |
| /* HELPER: Write SR11 */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetRegSR11ANDOR(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT DataAND, USHORT DataOR) |
| { |
| if(HwInfo->jChipType >= SIS_661) { |
| DataAND &= 0x0f; |
| DataOR &= 0x0f; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x11,DataAND,DataOR); |
| } |
| |
| /*********************************************/ |
| /* HELPER: Get Pointer to LCD structure */ |
| /*********************************************/ |
| |
| #ifdef SIS315H |
| static UCHAR * |
| GetLCDStructPtr661(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| UCHAR *myptr = NULL; |
| USHORT romindex = 0, reg = 0, idx = 0; |
| |
| /* Use the BIOS tables only for LVDS panels; TMDS is unreliable |
| * due to the variaty of panels the BIOS doesn't know about. |
| * Exception: If the BIOS has better knowledge (such as in case |
| * of machines with a 301C and a panel that does not support DDC) |
| * use the BIOS data as well. |
| */ |
| |
| if((SiS_Pr->SiS_ROMNew) && |
| ((SiS_Pr->SiS_VBType & VB_SIS301LV302LV) || (!SiS_Pr->PanelSelfDetected))) { |
| |
| if(HwInfo->jChipType < SIS_661) reg = 0x3c; |
| else reg = 0x7d; |
| |
| idx = (SiS_GetReg(SiS_Pr->SiS_P3d4,reg) & 0x1f) * 26; |
| |
| if(idx < (8*26)) { |
| myptr = (UCHAR *)&SiS_LCDStruct661[idx]; |
| } |
| romindex = SISGETROMW(0x100); |
| if(romindex) { |
| romindex += idx; |
| myptr = &ROMAddr[romindex]; |
| } |
| } |
| return myptr; |
| } |
| |
| static USHORT |
| GetLCDStructPtr661_2(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT romptr = 0; |
| |
| /* Use the BIOS tables only for LVDS panels; TMDS is unreliable |
| * due to the variaty of panels the BIOS doesn't know about. |
| * Exception: If the BIOS has better knowledge (such as in case |
| * of machines with a 301C and a panel that does not support DDC) |
| * use the BIOS data as well. |
| */ |
| |
| if((SiS_Pr->SiS_ROMNew) && |
| ((SiS_Pr->SiS_VBType & VB_SIS301LV302LV) || (!SiS_Pr->PanelSelfDetected))) { |
| romptr = SISGETROMW(0x102); |
| romptr += ((SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) >> 4) * SiS_Pr->SiS661LCD2TableSize); |
| } |
| |
| return(romptr); |
| } |
| #endif |
| |
| /*********************************************/ |
| /* Adjust Rate for CRT2 */ |
| /*********************************************/ |
| |
| static BOOLEAN |
| SiS_AdjustCRT2Rate(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RRTI, USHORT *i, PSIS_HW_INFO HwInfo) |
| { |
| USHORT checkmask=0,modeid,infoflag; |
| |
| modeid = SiS_Pr->SiS_RefIndex[RRTI + (*i)].ModeID; |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC) { |
| |
| checkmask |= SupportRAMDAC2; |
| if(HwInfo->jChipType >= SIS_315H) { |
| checkmask |= SupportRAMDAC2_135; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| checkmask |= SupportRAMDAC2_162; |
| if(SiS_Pr->SiS_VBType & VB_SIS301C) { |
| checkmask |= SupportRAMDAC2_202; |
| } |
| } |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| |
| checkmask |= SupportLCD; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| if(modeid == 0x2e) checkmask |= Support64048060Hz; |
| } |
| } |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| |
| checkmask |= SupportHiVision; |
| |
| } else if(SiS_Pr->SiS_VBInfo & (SetCRT2ToYPbPr525750|SetCRT2ToAVIDEO|SetCRT2ToSVIDEO|SetCRT2ToSCART)) { |
| |
| checkmask |= SupportTV; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| checkmask |= SupportTV1024; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) { |
| checkmask |= SupportYPbPr750p; |
| } |
| } |
| } |
| |
| } |
| |
| } else { /* LVDS */ |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| checkmask |= SupportCHTV; |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| checkmask |= SupportLCD; |
| } |
| |
| } |
| |
| /* Look backwards in table for matching CRT2 mode */ |
| for(; SiS_Pr->SiS_RefIndex[RRTI + (*i)].ModeID == modeid; (*i)--) { |
| infoflag = SiS_Pr->SiS_RefIndex[RRTI + (*i)].Ext_InfoFlag; |
| if(infoflag & checkmask) return TRUE; |
| if((*i) == 0) break; |
| } |
| |
| /* Look through the whole mode-section of the table from the beginning |
| * for a matching CRT2 mode if no mode was found yet. |
| */ |
| for((*i) = 0; ; (*i)++) { |
| if(SiS_Pr->SiS_RefIndex[RRTI + (*i)].ModeID != modeid) break; |
| infoflag = SiS_Pr->SiS_RefIndex[RRTI + (*i)].Ext_InfoFlag; |
| if(infoflag & checkmask) return TRUE; |
| } |
| return FALSE; |
| } |
| |
| /*********************************************/ |
| /* Get rate index */ |
| /*********************************************/ |
| |
| USHORT |
| SiS_GetRatePtr(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| SHORT LCDRefreshIndex[] = { 0x00, 0x00, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x01, |
| 0x00, 0x00, 0x00, 0x00 }; |
| USHORT RRTI,i,backup_i; |
| USHORT modeflag,index,temp,backupindex; |
| |
| /* Do NOT check for UseCustomMode here, will skrew up FIFO */ |
| if(ModeNo == 0xfe) return 0; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(modeflag & HalfDCLK) return 0; |
| } |
| } |
| |
| if(ModeNo < 0x14) return 0xFFFF; |
| |
| index = (SiS_GetReg(SiS_Pr->SiS_P3d4,0x33) >> SiS_Pr->SiS_SelectCRT2Rate) & 0x0F; |
| backupindex = index; |
| |
| if(index > 0) index--; |
| |
| if(SiS_Pr->SiS_SetFlag & ProgrammingCRT2) { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->SiS_VBType & VB_NoLCD) index = 0; |
| else if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) index = backupindex = 0; |
| } |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_VBType & VB_NoLCD)) { |
| temp = LCDRefreshIndex[SiS_GetBIOSLCDResInfo(SiS_Pr)]; |
| if(index > temp) index = temp; |
| } |
| } |
| } else { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) index = 0; |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) index = 0; |
| } |
| } |
| } |
| |
| RRTI = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].REFindex; |
| ModeNo = SiS_Pr->SiS_RefIndex[RRTI].ModeID; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(!(SiS_Pr->SiS_VBInfo & DriverMode)) { |
| if( (SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_VESAID == 0x105) || |
| (SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_VESAID == 0x107) ) { |
| if(backupindex <= 1) RRTI++; |
| } |
| } |
| } |
| |
| i = 0; |
| do { |
| if(SiS_Pr->SiS_RefIndex[RRTI + i].ModeID != ModeNo) break; |
| temp = SiS_Pr->SiS_RefIndex[RRTI + i].Ext_InfoFlag; |
| temp &= ModeTypeMask; |
| if(temp < SiS_Pr->SiS_ModeType) break; |
| i++; |
| index--; |
| } while(index != 0xFFFF); |
| |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC)) { |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| temp = SiS_Pr->SiS_RefIndex[RRTI + i - 1].Ext_InfoFlag; |
| if(temp & InterlaceMode) i++; |
| } |
| } |
| |
| i--; |
| |
| if((SiS_Pr->SiS_SetFlag & ProgrammingCRT2) && (!(SiS_Pr->SiS_VBInfo & DisableCRT2Display))) { |
| backup_i = i; |
| if(!(SiS_AdjustCRT2Rate(SiS_Pr, ModeNo, ModeIdIndex, RRTI, &i, HwInfo))) { |
| i = backup_i; |
| } |
| } |
| |
| return(RRTI + i); |
| } |
| |
| /*********************************************/ |
| /* STORE CRT2 INFO in CR34 */ |
| /*********************************************/ |
| |
| static void |
| SiS_SaveCRT2Info(SiS_Private *SiS_Pr, USHORT ModeNo) |
| { |
| USHORT temp1,temp2; |
| |
| /* Store CRT1 ModeNo in CR34 */ |
| SiS_SetReg(SiS_Pr->SiS_P3d4,0x34,ModeNo); |
| temp1 = (SiS_Pr->SiS_VBInfo & SetInSlaveMode) >> 8; |
| temp2 = ~(SetInSlaveMode >> 8); |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x31,temp2,temp1); |
| } |
| |
| /*********************************************/ |
| /* HELPER: GET SOME DATA FROM BIOS ROM */ |
| /*********************************************/ |
| |
| #ifdef SIS300 |
| static BOOLEAN |
| SiS_CR36BIOSWord23b(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT temp,temp1; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if((ROMAddr[0x233] == 0x12) && (ROMAddr[0x234] == 0x34)) { |
| temp = 1 << ((SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) >> 4) & 0x0f); |
| temp1 = SISGETROMW(0x23b); |
| if(temp1 & temp) return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| static BOOLEAN |
| SiS_CR36BIOSWord23d(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT temp,temp1; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if((ROMAddr[0x233] == 0x12) && (ROMAddr[0x234] == 0x34)) { |
| temp = 1 << ((SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) >> 4) & 0x0f); |
| temp1 = SISGETROMW(0x23d); |
| if(temp1 & temp) return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| #endif |
| |
| /*********************************************/ |
| /* HELPER: DELAY FUNCTIONS */ |
| /*********************************************/ |
| |
| void |
| SiS_DDC2Delay(SiS_Private *SiS_Pr, USHORT delaytime) |
| { |
| USHORT i, j; |
| |
| for(i=0; i<delaytime; i++) { |
| j += SiS_GetReg(SiS_Pr->SiS_P3c4,0x05); |
| } |
| } |
| |
| #if defined(SIS300) || defined(SIS315H) |
| static void |
| SiS_GenericDelay(SiS_Private *SiS_Pr, USHORT delay) |
| { |
| USHORT temp,flag; |
| |
| flag = SiS_GetRegByte(0x61) & 0x10; |
| |
| while(delay) { |
| temp = SiS_GetRegByte(0x61) & 0x10; |
| if(temp == flag) continue; |
| flag = temp; |
| delay--; |
| } |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static void |
| SiS_LongDelay(SiS_Private *SiS_Pr, USHORT delay) |
| { |
| while(delay--) { |
| SiS_GenericDelay(SiS_Pr,0x19df); |
| } |
| } |
| #endif |
| |
| #if defined(SIS300) || defined(SIS315H) |
| static void |
| SiS_ShortDelay(SiS_Private *SiS_Pr, USHORT delay) |
| { |
| while(delay--) { |
| SiS_GenericDelay(SiS_Pr,0x42); |
| } |
| } |
| #endif |
| |
| static void |
| SiS_PanelDelay(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT DelayTime) |
| { |
| #if defined(SIS300) || defined(SIS315H) |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT PanelID, DelayIndex, Delay=0; |
| #endif |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 |
| |
| PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36); |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_VBType & VB_SIS301) PanelID &= 0xf7; |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x18) & 0x10)) PanelID = 0x12; |
| } |
| DelayIndex = PanelID >> 4; |
| if((DelayTime >= 2) && ((PanelID & 0x0f) == 1)) { |
| Delay = 3; |
| } else { |
| if(DelayTime >= 2) DelayTime -= 2; |
| if(!(DelayTime & 0x01)) { |
| Delay = SiS_Pr->SiS_PanelDelayTbl[DelayIndex].timer[0]; |
| } else { |
| Delay = SiS_Pr->SiS_PanelDelayTbl[DelayIndex].timer[1]; |
| } |
| if(SiS_Pr->SiS_UseROM) { |
| if(ROMAddr[0x220] & 0x40) { |
| if(!(DelayTime & 0x01)) Delay = (USHORT)ROMAddr[0x225]; |
| else Delay = (USHORT)ROMAddr[0x226]; |
| } |
| } |
| } |
| SiS_ShortDelay(SiS_Pr, Delay); |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H |
| |
| if((HwInfo->jChipType >= SIS_661) || |
| (HwInfo->jChipType <= SIS_315PRO) || |
| (HwInfo->jChipType == SIS_330) || |
| (SiS_Pr->SiS_ROMNew)) { |
| |
| if(!(DelayTime & 0x01)) { |
| SiS_DDC2Delay(SiS_Pr, 0x1000); |
| } else { |
| SiS_DDC2Delay(SiS_Pr, 0x4000); |
| } |
| |
| } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || |
| (SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) || |
| (SiS_Pr->SiS_CustomT == CUT_CLEVO1400) */ ) { /* 315 series, LVDS; Special */ |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36); |
| if(SiS_Pr->SiS_CustomT == CUT_CLEVO1400) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x1b) & 0x10)) PanelID = 0x12; |
| } |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) { |
| DelayIndex = PanelID & 0x0f; |
| } else { |
| DelayIndex = PanelID >> 4; |
| } |
| if((DelayTime >= 2) && ((PanelID & 0x0f) == 1)) { |
| Delay = 3; |
| } else { |
| if(DelayTime >= 2) DelayTime -= 2; |
| if(!(DelayTime & 0x01)) { |
| Delay = SiS_Pr->SiS_PanelDelayTblLVDS[DelayIndex].timer[0]; |
| } else { |
| Delay = SiS_Pr->SiS_PanelDelayTblLVDS[DelayIndex].timer[1]; |
| } |
| if((SiS_Pr->SiS_UseROM) && (!(SiS_Pr->SiS_ROMNew))) { |
| if(ROMAddr[0x13c] & 0x40) { |
| if(!(DelayTime & 0x01)) { |
| Delay = (USHORT)ROMAddr[0x17e]; |
| } else { |
| Delay = (USHORT)ROMAddr[0x17f]; |
| } |
| } |
| } |
| } |
| SiS_ShortDelay(SiS_Pr, Delay); |
| } |
| |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { /* 315 series, all bridges */ |
| |
| DelayIndex = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) >> 4; |
| if(!(DelayTime & 0x01)) { |
| Delay = SiS_Pr->SiS_PanelDelayTbl[DelayIndex].timer[0]; |
| } else { |
| Delay = SiS_Pr->SiS_PanelDelayTbl[DelayIndex].timer[1]; |
| } |
| Delay <<= 8; |
| SiS_DDC2Delay(SiS_Pr, Delay); |
| |
| } |
| |
| #endif /* SIS315H */ |
| |
| } |
| } |
| |
| #ifdef SIS315H |
| static void |
| SiS_PanelDelayLoop(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT DelayTime, USHORT DelayLoop) |
| { |
| int i; |
| for(i=0; i<DelayLoop; i++) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, DelayTime); |
| } |
| } |
| #endif |
| |
| /*********************************************/ |
| /* HELPER: WAIT-FOR-RETRACE FUNCTIONS */ |
| /*********************************************/ |
| |
| void |
| SiS_WaitRetrace1(SiS_Private *SiS_Pr) |
| { |
| USHORT watchdog; |
| |
| if(SiS_GetReg(SiS_Pr->SiS_P3c4,0x1f) & 0xc0) return; |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3d4,0x17) & 0x80)) return; |
| |
| watchdog = 65535; |
| while((SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08) && --watchdog); |
| watchdog = 65535; |
| while((!(SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08)) && --watchdog); |
| } |
| |
| #if defined(SIS300) || defined(SIS315H) |
| static void |
| SiS_WaitRetrace2(SiS_Private *SiS_Pr, USHORT reg) |
| { |
| USHORT watchdog; |
| |
| watchdog = 65535; |
| while((SiS_GetReg(SiS_Pr->SiS_Part1Port,reg) & 0x02) && --watchdog); |
| watchdog = 65535; |
| while((!(SiS_GetReg(SiS_Pr->SiS_Part1Port,reg) & 0x02)) && --watchdog); |
| } |
| #endif |
| |
| static void |
| SiS_WaitVBRetrace(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if(HwInfo->jChipType < SIS_315H) { |
| #ifdef SIS300 |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x20)) return; |
| } |
| if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x80)) { |
| SiS_WaitRetrace1(SiS_Pr); |
| } else { |
| SiS_WaitRetrace2(SiS_Pr, 0x25); |
| } |
| #endif |
| } else { |
| #ifdef SIS315H |
| if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x40)) { |
| SiS_WaitRetrace1(SiS_Pr); |
| } else { |
| SiS_WaitRetrace2(SiS_Pr, 0x30); |
| } |
| #endif |
| } |
| } |
| |
| static void |
| SiS_VBWait(SiS_Private *SiS_Pr) |
| { |
| USHORT tempal,temp,i,j; |
| |
| temp = 0; |
| for(i=0; i<3; i++) { |
| for(j=0; j<100; j++) { |
| tempal = SiS_GetRegByte(SiS_Pr->SiS_P3da); |
| if(temp & 0x01) { |
| if((tempal & 0x08)) continue; |
| else break; |
| } else { |
| if(!(tempal & 0x08)) continue; |
| else break; |
| } |
| } |
| temp ^= 0x01; |
| } |
| } |
| |
| static void |
| SiS_VBLongWait(SiS_Private *SiS_Pr) |
| { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| SiS_VBWait(SiS_Pr); |
| } else { |
| SiS_WaitRetrace1(SiS_Pr); |
| } |
| } |
| |
| /*********************************************/ |
| /* HELPER: MISC */ |
| /*********************************************/ |
| |
| #ifdef SIS300 |
| static BOOLEAN |
| SiS_Is301B(SiS_Private *SiS_Pr) |
| { |
| if(SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01) >= 0xb0) return TRUE; |
| return FALSE; |
| } |
| #endif |
| |
| static BOOLEAN |
| SiS_CRT2IsLCD(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(HwInfo->jChipType == SIS_730) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3c4,0x13); |
| if(flag & 0x20) return TRUE; |
| } |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(flag & 0x20) return TRUE; |
| return FALSE; |
| } |
| |
| BOOLEAN |
| SiS_IsDualEdge(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| #ifdef SIS315H |
| USHORT flag; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| if((HwInfo->jChipType != SIS_650) || (SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xf0)) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(flag & EnableDualEdge) return TRUE; |
| } |
| } |
| #endif |
| return FALSE; |
| } |
| |
| BOOLEAN |
| SiS_IsVAMode(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| #ifdef SIS315H |
| USHORT flag; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if((flag & EnableDualEdge) && (flag & SetToLCDA)) return TRUE; |
| } |
| #endif |
| return FALSE; |
| } |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_IsVAorLCD(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if(SiS_IsVAMode(SiS_Pr,HwInfo)) return TRUE; |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) return TRUE; |
| return FALSE; |
| } |
| #endif |
| |
| static BOOLEAN |
| SiS_IsDualLink(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| #ifdef SIS315H |
| if(HwInfo->jChipType >= SIS_315H) { |
| if((SiS_CRT2IsLCD(SiS_Pr, HwInfo)) || |
| (SiS_IsVAMode(SiS_Pr, HwInfo))) { |
| if(SiS_Pr->SiS_LCDInfo & LCDDualLink) return TRUE; |
| } |
| } |
| #endif |
| return FALSE; |
| } |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_TVEnabled(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if((SiS_GetReg(SiS_Pr->SiS_Part2Port,0x00) & 0x0f) != 0x0c) return TRUE; |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS301LV302LV)) { |
| if(SiS_GetReg(SiS_Pr->SiS_Part2Port,0x4d) & 0x10) return TRUE; |
| } |
| return FALSE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_LCDAEnabled(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x13) & 0x04) return TRUE; |
| return FALSE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_WeHaveBacklightCtrl(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| if((HwInfo->jChipType >= SIS_315H) && (HwInfo->jChipType < SIS_661)) { |
| if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x79) & 0x10) return TRUE; |
| } |
| return FALSE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_IsNotM650orLater(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(HwInfo->jChipType == SIS_650) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f); |
| flag &= 0xF0; |
| /* Check for revision != A0 only */ |
| if((flag == 0xe0) || (flag == 0xc0) || |
| (flag == 0xb0) || (flag == 0x90)) return FALSE; |
| } else if(HwInfo->jChipType >= SIS_661) return FALSE; |
| return TRUE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_IsYPbPr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(flag & EnableCHYPbPr) return TRUE; /* = YPrPb = 0x08 */ |
| } |
| return FALSE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_IsChScart(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(flag & EnableCHScart) return TRUE; /* = Scart = 0x04 */ |
| } |
| return FALSE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_IsTVOrYPbPrOrScart(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(flag & SetCRT2ToTV) return TRUE; |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(flag & EnableCHYPbPr) return TRUE; /* = YPrPb = 0x08 */ |
| if(flag & EnableCHScart) return TRUE; /* = Scart = 0x04 - TW */ |
| } else { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(flag & SetCRT2ToTV) return TRUE; |
| } |
| return FALSE; |
| } |
| #endif |
| |
| #ifdef SIS315H |
| static BOOLEAN |
| SiS_IsLCDOrLCDA(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(flag & SetCRT2ToLCD) return TRUE; |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(flag & SetToLCDA) return TRUE; |
| } else { |
| flag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(flag & SetCRT2ToLCD) return TRUE; |
| } |
| return FALSE; |
| } |
| #endif |
| |
| static BOOLEAN |
| SiS_BridgeIsOn(SiS_Private *SiS_Pr) |
| { |
| USHORT flag; |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| return TRUE; |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| flag = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x00); |
| if((flag == 1) || (flag == 2)) return TRUE; |
| } |
| return FALSE; |
| } |
| |
| static BOOLEAN |
| SiS_BridgeIsEnabled(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT flag; |
| |
| if(SiS_BridgeIsOn(SiS_Pr)) { |
| flag = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00); |
| if(HwInfo->jChipType < SIS_315H) { |
| flag &= 0xa0; |
| if((flag == 0x80) || (flag == 0x20)) return TRUE; |
| } else { |
| flag &= 0x50; |
| if((flag == 0x40) || (flag == 0x10)) return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| static BOOLEAN |
| SiS_BridgeInSlavemode(SiS_Private *SiS_Pr) |
| { |
| USHORT flag1; |
| |
| flag1 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31); |
| if(flag1 & (SetInSlaveMode >> 8)) return TRUE; |
| return FALSE; |
| } |
| |
| /*********************************************/ |
| /* GET VIDEO BRIDGE CONFIG INFO */ |
| /*********************************************/ |
| |
| /* Setup general purpose IO for Chrontel communication */ |
| void |
| SiS_SetChrontelGPIO(SiS_Private *SiS_Pr, USHORT myvbinfo) |
| { |
| unsigned long acpibase; |
| unsigned short temp; |
| |
| if(!(SiS_Pr->SiS_ChSW)) return; |
| |
| #ifdef LINUX_KERNEL |
| SiS_SetRegLong(0xcf8,0x80000874); /* get ACPI base */ |
| acpibase = SiS_GetRegLong(0xcfc); |
| #else |
| acpibase = pciReadLong(0x00000800, 0x74); |
| #endif |
| acpibase &= 0xFFFF; |
| temp = SiS_GetRegShort((USHORT)(acpibase + 0x3c)); /* ACPI register 0x3c: GP Event 1 I/O mode select */ |
| temp &= 0xFEFF; |
| SiS_SetRegShort((USHORT)(acpibase + 0x3c), temp); |
| temp = SiS_GetRegShort((USHORT)(acpibase + 0x3c)); |
| temp = SiS_GetRegShort((USHORT)(acpibase + 0x3a)); /* ACPI register 0x3a: GP Pin Level (low/high) */ |
| temp &= 0xFEFF; |
| if(!(myvbinfo & SetCRT2ToTV)) temp |= 0x0100; |
| SiS_SetRegShort((USHORT)(acpibase + 0x3a), temp); |
| temp = SiS_GetRegShort((USHORT)(acpibase + 0x3a)); |
| } |
| |
| void |
| SiS_GetVBInfo(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo, int checkcrt2mode) |
| { |
| USHORT tempax,tempbx,temp; |
| USHORT modeflag, resinfo=0; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| } |
| |
| SiS_Pr->SiS_SetFlag = 0; |
| |
| SiS_Pr->SiS_ModeType = modeflag & ModeTypeMask; |
| |
| tempbx = 0; |
| if(SiS_BridgeIsOn(SiS_Pr)) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| #if 0 |
| if(HwInfo->jChipType < SIS_661) { |
| /* NO - YPbPr not set yet ! */ |
| if(SiS_Pr->SiS_YPbPr & <all ypbpr except 525i>) { |
| temp &= (SetCRT2ToHiVision | SwitchCRT2 | SetSimuScanMode); /* 0x83 */ |
| temp |= SetCRT2ToHiVision; /* 0x80 */ |
| } |
| if(SiS_Pr->SiS_YPbPr & <ypbpr525i>) { |
| temp &= (SetCRT2ToHiVision | SwitchCRT2 | SetSimuScanMode); /* 0x83 */ |
| temp |= SetCRT2ToSVIDEO; /* 0x08 */ |
| } |
| } |
| #endif |
| tempbx |= temp; |
| tempax = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) << 8; |
| tempax &= (DriverMode | LoadDACFlag | SetNotSimuMode | SetPALTV); |
| tempbx |= tempax; |
| |
| #ifdef SIS315H |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VBType & VB_SISLCDA) { |
| if(ModeNo == 0x03) { |
| /* Mode 0x03 is never in driver mode */ |
| SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x31,0xbf); |
| } |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & (DriverMode >> 8))) { |
| /* Reset LCDA setting if not driver mode */ |
| SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc); |
| } |
| if(IS_SIS650) { |
| if(SiS_Pr->SiS_UseLCDA) { |
| if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xF0) { |
| if((ModeNo <= 0x13) || (!(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & (DriverMode >> 8)))) { |
| SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x38,(EnableDualEdge | SetToLCDA)); |
| } |
| } |
| } |
| } |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if((temp & (EnableDualEdge | SetToLCDA)) == (EnableDualEdge | SetToLCDA)) { |
| tempbx |= SetCRT2ToLCDA; |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)) { |
| tempbx &= ~(SetCRT2ToRAMDAC); |
| } |
| |
| if(HwInfo->jChipType >= SIS_661) { |
| tempbx &= ~(SetCRT2ToYPbPr525750 | SetCRT2ToHiVision); |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(SiS_Pr->SiS_VBType & VB_SISYPBPR) { |
| if(temp & 0x04) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35) & 0xe0; |
| if(temp == 0x60) tempbx |= SetCRT2ToHiVision; |
| else tempbx |= SetCRT2ToYPbPr525750; |
| } |
| } else if(SiS_Pr->SiS_VBType & VB_SISHIVISION) { |
| if(temp & 0x04) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35) & 0xe0; |
| if(temp == 0x60) tempbx |= SetCRT2ToHiVision; |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(temp & SetToLCDA) { |
| tempbx |= SetCRT2ToLCDA; |
| } |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(temp & EnableCHYPbPr) { |
| tempbx |= SetCRT2ToCHYPbPr; |
| } |
| } |
| } |
| } |
| |
| #endif /* SIS315H */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| temp = SetCRT2ToSVIDEO | |
| SetCRT2ToAVIDEO | |
| SetCRT2ToSCART | |
| SetCRT2ToLCDA | |
| SetCRT2ToLCD | |
| SetCRT2ToRAMDAC | |
| SetCRT2ToHiVision | |
| SetCRT2ToYPbPr525750; |
| } else { |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| temp = SetCRT2ToAVIDEO | |
| SetCRT2ToSVIDEO | |
| SetCRT2ToSCART | |
| SetCRT2ToLCDA | |
| SetCRT2ToLCD | |
| SetCRT2ToCHYPbPr; |
| } else { |
| temp = SetCRT2ToLCDA | |
| SetCRT2ToLCD; |
| } |
| } else { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| temp = SetCRT2ToTV | SetCRT2ToLCD; |
| } else { |
| temp = SetCRT2ToLCD; |
| } |
| } |
| } |
| |
| if(!(tempbx & temp)) { |
| tempax = DisableCRT2Display; |
| tempbx = 0; |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| USHORT clearmask = ( DriverMode | |
| DisableCRT2Display | |
| LoadDACFlag | |
| SetNotSimuMode | |
| SetInSlaveMode | |
| SetPALTV | |
| SwitchCRT2 | |
| SetSimuScanMode ); |
| if(tempbx & SetCRT2ToLCDA) tempbx &= (clearmask | SetCRT2ToLCDA); |
| if(tempbx & SetCRT2ToRAMDAC) tempbx &= (clearmask | SetCRT2ToRAMDAC); |
| if(tempbx & SetCRT2ToLCD) tempbx &= (clearmask | SetCRT2ToLCD); |
| if(tempbx & SetCRT2ToSCART) tempbx &= (clearmask | SetCRT2ToSCART); |
| if(tempbx & SetCRT2ToHiVision) tempbx &= (clearmask | SetCRT2ToHiVision); |
| if(tempbx & SetCRT2ToYPbPr525750) tempbx &= (clearmask | SetCRT2ToYPbPr525750); |
| } else { |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(tempbx & SetCRT2ToLCDA) { |
| tempbx &= (0xFF00|SwitchCRT2|SetSimuScanMode); |
| } |
| } |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(tempbx & SetCRT2ToTV) { |
| tempbx &= (0xFF00|SetCRT2ToTV|SwitchCRT2|SetSimuScanMode); |
| } |
| } |
| if(tempbx & SetCRT2ToLCD) { |
| tempbx &= (0xFF00|SetCRT2ToLCD|SwitchCRT2|SetSimuScanMode); |
| } |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(tempbx & SetCRT2ToLCDA) { |
| tempbx |= SetCRT2ToLCD; |
| } |
| } |
| } |
| |
| if(tempax & DisableCRT2Display) { |
| if(!(tempbx & (SwitchCRT2 | SetSimuScanMode))) { |
| tempbx = SetSimuScanMode | DisableCRT2Display; |
| } |
| } |
| |
| if(!(tempbx & DriverMode)) tempbx |= SetSimuScanMode; |
| |
| /* LVDS/CHRONTEL (LCD/TV) and 301BDH (LCD) can only be slave in 8bpp modes */ |
| if(SiS_Pr->SiS_ModeType <= ModeVGA) { |
| if( (SiS_Pr->SiS_IF_DEF_LVDS == 1) || |
| ((SiS_Pr->SiS_VBType & VB_NoLCD) && (tempbx & SetCRT2ToLCD)) ) { |
| modeflag &= (~CRT2Mode); |
| } |
| } |
| |
| if(!(tempbx & SetSimuScanMode)) { |
| if(tempbx & SwitchCRT2) { |
| if((!(modeflag & CRT2Mode)) && (checkcrt2mode)) { |
| if( (HwInfo->jChipType >= SIS_315H) && |
| (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) ) { |
| if(resinfo != SIS_RI_1600x1200) { |
| tempbx |= SetSimuScanMode; |
| } |
| } else { |
| tempbx |= SetSimuScanMode; |
| } |
| } |
| } else { |
| if(SiS_BridgeIsEnabled(SiS_Pr,HwInfo)) { |
| if(!(tempbx & DriverMode)) { |
| if(SiS_BridgeInSlavemode(SiS_Pr)) { |
| tempbx |= SetSimuScanMode; |
| } |
| } |
| } |
| } |
| } |
| |
| if(!(tempbx & DisableCRT2Display)) { |
| if(tempbx & DriverMode) { |
| if(tempbx & SetSimuScanMode) { |
| if((!(modeflag & CRT2Mode)) && (checkcrt2mode)) { |
| if( (HwInfo->jChipType >= SIS_315H) && |
| (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) ) { |
| if(resinfo != SIS_RI_1600x1200) { |
| tempbx |= SetInSlaveMode; |
| } |
| } else { |
| tempbx |= SetInSlaveMode; |
| } |
| } |
| } |
| } else { |
| tempbx |= SetInSlaveMode; |
| } |
| } |
| |
| } |
| |
| SiS_Pr->SiS_VBInfo = tempbx; |
| |
| if(HwInfo->jChipType == SIS_630) { |
| SiS_SetChrontelGPIO(SiS_Pr, SiS_Pr->SiS_VBInfo); |
| } |
| |
| #ifdef TWDEBUG |
| #ifdef LINUX_KERNEL |
| printk(KERN_DEBUG "sisfb: (VBInfo= 0x%04x, SetFlag=0x%04x)\n", |
| SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag); |
| #endif |
| #ifdef LINUX_XF86 |
| xf86DrvMsgVerb(0, X_PROBED, 3, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n", |
| SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag); |
| #endif |
| #endif |
| } |
| |
| /*********************************************/ |
| /* DETERMINE YPbPr MODE */ |
| /*********************************************/ |
| |
| void |
| SiS_SetYPbPr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| |
| UCHAR temp; |
| |
| /* Note: This variable is only used on 30xLV systems. |
| * CR38 has a different meaning on LVDS/CH7019 systems. |
| * On 661 and later, these bits moved to CR35. |
| * |
| * On 301, 301B, only HiVision 1080i is supported. |
| * On 30xLV, 301C, only YPbPr 1080i is supported. |
| */ |
| |
| SiS_Pr->SiS_YPbPr = 0; |
| if(HwInfo->jChipType >= SIS_661) return; |
| |
| if(SiS_Pr->SiS_VBType) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| SiS_Pr->SiS_YPbPr = YPbPrHiVision; |
| } |
| } |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VBType & (VB_SIS301LV302LV | VB_SIS301C)) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(temp & 0x08) { |
| switch((temp >> 4)) { |
| case 0x00: SiS_Pr->SiS_YPbPr = YPbPr525i; break; |
| case 0x01: SiS_Pr->SiS_YPbPr = YPbPr525p; break; |
| case 0x02: SiS_Pr->SiS_YPbPr = YPbPr750p; break; |
| case 0x03: SiS_Pr->SiS_YPbPr = YPbPrHiVision; break; |
| } |
| } |
| } |
| } |
| |
| } |
| |
| /*********************************************/ |
| /* DETERMINE TVMode flag */ |
| /*********************************************/ |
| |
| void |
| SiS_SetTVMode(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT temp, temp1, resinfo = 0, romindex = 0; |
| UCHAR OutputSelect = *SiS_Pr->pSiS_OutputSelect; |
| |
| SiS_Pr->SiS_TVMode = 0; |
| |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) return; |
| if(SiS_Pr->UseCustomMode) return; |
| |
| if(ModeNo > 0x13) { |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| } |
| |
| if(HwInfo->jChipType < SIS_661) { |
| |
| if(SiS_Pr->SiS_VBInfo & SetPALTV) SiS_Pr->SiS_TVMode |= TVSetPAL; |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| temp = 0; |
| if((HwInfo->jChipType == SIS_630) || |
| (HwInfo->jChipType == SIS_730)) { |
| temp = 0x35; |
| romindex = 0xfe; |
| } else if(HwInfo->jChipType >= SIS_315H) { |
| temp = 0x38; |
| romindex = 0xf3; |
| if(HwInfo->jChipType >= SIS_330) romindex = 0x11b; |
| } |
| if(temp) { |
| if(romindex && SiS_Pr->SiS_UseROM && (!(SiS_Pr->SiS_ROMNew))) { |
| OutputSelect = ROMAddr[romindex]; |
| if(!(OutputSelect & EnablePALMN)) { |
| SiS_SetRegAND(SiS_Pr->SiS_P3d4,temp,0x3F); |
| } |
| } |
| temp1 = SiS_GetReg(SiS_Pr->SiS_P3d4,temp); |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| if(temp1 & EnablePALM) { /* 0x40 */ |
| SiS_Pr->SiS_TVMode |= TVSetPALM; |
| SiS_Pr->SiS_TVMode &= ~TVSetPAL; |
| } else if(temp1 & EnablePALN) { /* 0x80 */ |
| SiS_Pr->SiS_TVMode |= TVSetPALN; |
| } |
| } else { |
| if(temp1 & EnableNTSCJ) { /* 0x40 */ |
| SiS_Pr->SiS_TVMode |= TVSetNTSCJ; |
| } |
| } |
| } |
| /* Translate HiVision/YPbPr to our new flags */ |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if(SiS_Pr->SiS_YPbPr == YPbPr750p) SiS_Pr->SiS_TVMode |= TVSetYPbPr750p; |
| else if(SiS_Pr->SiS_YPbPr == YPbPr525p) SiS_Pr->SiS_TVMode |= TVSetYPbPr525p; |
| else if(SiS_Pr->SiS_YPbPr == YPbPrHiVision) SiS_Pr->SiS_TVMode |= TVSetHiVision; |
| else SiS_Pr->SiS_TVMode |= TVSetYPbPr525i; |
| if(SiS_Pr->SiS_TVMode & (TVSetYPbPr750p | TVSetYPbPr525p | TVSetYPbPr525i)) { |
| SiS_Pr->SiS_VBInfo &= ~SetCRT2ToHiVision; |
| SiS_Pr->SiS_VBInfo |= SetCRT2ToYPbPr525750; |
| } else if(SiS_Pr->SiS_TVMode & TVSetHiVision) { |
| SiS_Pr->SiS_TVMode |= TVSetPAL; |
| } |
| } |
| } else if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_CHOverScan) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); |
| if((temp & TVOverScan) || (SiS_Pr->SiS_CHOverScan == 1)) { |
| SiS_Pr->SiS_TVMode |= TVSetCHOverScan; |
| } |
| } else if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x79); |
| if((temp & 0x80) || (SiS_Pr->SiS_CHOverScan == 1)) { |
| SiS_Pr->SiS_TVMode |= TVSetCHOverScan; |
| } |
| } |
| if(SiS_Pr->SiS_CHSOverScan) { |
| SiS_Pr->SiS_TVMode |= TVSetCHOverScan; |
| } |
| } |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| if(temp & EnablePALM) SiS_Pr->SiS_TVMode |= TVSetPALM; |
| else if(temp & EnablePALN) SiS_Pr->SiS_TVMode |= TVSetPALN; |
| } else { |
| if(temp & EnableNTSCJ) { |
| SiS_Pr->SiS_TVMode |= TVSetNTSCJ; |
| } |
| } |
| } |
| } |
| |
| } else { /* 661 and later */ |
| |
| temp1 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); |
| if(temp1 & 0x01) { |
| SiS_Pr->SiS_TVMode |= TVSetPAL; |
| if(temp1 & 0x08) { |
| SiS_Pr->SiS_TVMode |= TVSetPALN; |
| } else if(temp1 & 0x04) { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| SiS_Pr->SiS_TVMode &= ~TVSetPAL; |
| } |
| SiS_Pr->SiS_TVMode |= TVSetPALM; |
| } |
| } else { |
| if(temp1 & 0x02) { |
| SiS_Pr->SiS_TVMode |= TVSetNTSCJ; |
| } |
| } |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(SiS_Pr->SiS_CHOverScan) { |
| if((temp1 & 0x10) || (SiS_Pr->SiS_CHOverScan == 1)) { |
| SiS_Pr->SiS_TVMode |= TVSetCHOverScan; |
| } |
| } |
| } |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| temp1 &= 0xe0; |
| if(temp1 == 0x00) SiS_Pr->SiS_TVMode |= TVSetYPbPr525i; |
| else if(temp1 == 0x20) SiS_Pr->SiS_TVMode |= TVSetYPbPr525p; |
| else if(temp1 == 0x40) SiS_Pr->SiS_TVMode |= TVSetYPbPr750p; |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| SiS_Pr->SiS_TVMode |= (TVSetHiVision | TVSetPAL); |
| } |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToYPbPr525750 | SetCRT2ToHiVision)) { |
| if(resinfo == SIS_RI_800x480 || resinfo == SIS_RI_1024x576 || resinfo == SIS_RI_1280x720) { |
| SiS_Pr->SiS_TVMode |= TVAspect169; |
| } else { |
| temp1 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x39); |
| if(temp1 & 0x02) { |
| if(SiS_Pr->SiS_TVMode & (TVSetYPbPr750p | TVSetHiVision)) { |
| SiS_Pr->SiS_TVMode |= TVAspect169; |
| } else { |
| SiS_Pr->SiS_TVMode |= TVAspect43LB; |
| } |
| } else { |
| SiS_Pr->SiS_TVMode |= TVAspect43; |
| } |
| } |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToSCART) SiS_Pr->SiS_TVMode |= TVSetPAL; |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| SiS_Pr->SiS_TVMode |= TVSetPAL; |
| SiS_Pr->SiS_TVMode &= ~(TVSetPALM | TVSetPALN | TVSetNTSCJ); |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(SiS_Pr->SiS_TVMode & (TVSetYPbPr525i | TVSetYPbPr525p | TVSetYPbPr750p)) { |
| SiS_Pr->SiS_TVMode &= ~(TVSetPAL | TVSetNTSCJ | TVSetPALM | TVSetPALN); |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(!(SiS_Pr->SiS_VBInfo & SetNotSimuMode)) { |
| SiS_Pr->SiS_TVMode |= TVSetTVSimuMode; |
| } |
| } |
| |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { |
| /* BIOS sets TVNTSC1024 without checking 525p here. Wrong? */ |
| if(!(SiS_Pr->SiS_TVMode & (TVSetHiVision | TVSetYPbPr525p | TVSetYPbPr750p))) { |
| if(resinfo == SIS_RI_1024x768) { |
| SiS_Pr->SiS_TVMode |= TVSetNTSC1024; |
| } |
| } |
| } |
| |
| SiS_Pr->SiS_TVMode |= TVRPLLDIV2XO; |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) && |
| (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| SiS_Pr->SiS_TVMode &= ~TVRPLLDIV2XO; |
| } else if(SiS_Pr->SiS_TVMode & (TVSetYPbPr525p | TVSetYPbPr750p)) { |
| SiS_Pr->SiS_TVMode &= ~TVRPLLDIV2XO; |
| } else if(!(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV)) { |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| SiS_Pr->SiS_TVMode &= ~TVRPLLDIV2XO; |
| } |
| } |
| |
| } |
| |
| SiS_Pr->SiS_VBInfo &= ~SetPALTV; |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo); |
| #endif |
| } |
| |
| /*********************************************/ |
| /* GET LCD INFO */ |
| /*********************************************/ |
| |
| static USHORT |
| SiS_GetBIOSLCDResInfo(SiS_Private *SiS_Pr) |
| { |
| USHORT temp = SiS_Pr->SiS_LCDResInfo; |
| /* Translate my LCDResInfo to BIOS value */ |
| if(temp == Panel_1280x768_2) temp = Panel_1280x768; |
| if(temp == Panel_1280x800_2) temp = Panel_1280x800; |
| return temp; |
| } |
| |
| static void |
| SiS_GetLCDInfoBIOS(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| #ifdef SIS315H |
| UCHAR *ROMAddr; |
| USHORT temp; |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n", |
| SiS_Pr->PanelHT, SiS_Pr->PanelVT, |
| SiS_Pr->PanelHRS, SiS_Pr->PanelHRE, |
| SiS_Pr->PanelVRS, SiS_Pr->PanelVRE, |
| SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK, |
| SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A, |
| SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B); |
| #endif |
| |
| if((ROMAddr = GetLCDStructPtr661(SiS_Pr, HwInfo))) { |
| if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) { |
| SiS_Pr->SiS_NeedRomModeData = TRUE; |
| SiS_Pr->PanelHT = temp; |
| } |
| if((temp = SISGETROMW(8)) != SiS_Pr->PanelVT) { |
| SiS_Pr->SiS_NeedRomModeData = TRUE; |
| SiS_Pr->PanelVT = temp; |
| } |
| SiS_Pr->PanelHRS = SISGETROMW(10); |
| SiS_Pr->PanelHRE = SISGETROMW(12); |
| SiS_Pr->PanelVRS = SISGETROMW(14); |
| SiS_Pr->PanelVRE = SISGETROMW(16); |
| SiS_Pr->PanelVCLKIdx315 = VCLK_CUSTOM_315; |
| SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].CLOCK = |
| SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].CLOCK = (USHORT)((UCHAR)ROMAddr[18]); |
| SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2B = |
| SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_A = ROMAddr[19]; |
| SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C = |
| SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20]; |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "Paneldata BIOS: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n", |
| SiS_Pr->PanelHT, SiS_Pr->PanelVT, |
| SiS_Pr->PanelHRS, SiS_Pr->PanelHRE, |
| SiS_Pr->PanelVRS, SiS_Pr->PanelVRE, |
| SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK, |
| SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A, |
| SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B); |
| #endif |
| |
| } |
| #endif |
| } |
| |
| static void |
| SiS_CheckScaling(SiS_Private *SiS_Pr, USHORT resinfo, const UCHAR *nonscalingmodes) |
| { |
| int i = 0; |
| while(nonscalingmodes[i] != 0xff) { |
| if(nonscalingmodes[i++] == resinfo) { |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) || |
| (SiS_Pr->UsePanelScaler == -1)) { |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| } |
| break; |
| } |
| } |
| } |
| |
| void |
| SiS_GetLCDResInfo(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| #ifdef SIS300 |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| const unsigned char SiS300SeriesLCDRes[] = |
| { 0, 1, 2, 3, 7, 4, 5, 8, |
| 0, 0, 10, 0, 0, 0, 0, 15 }; |
| #endif |
| #ifdef SIS315H |
| UCHAR *myptr = NULL; |
| #endif |
| USHORT temp,modeflag,resinfo=0,modexres=0,modeyres=0; |
| BOOLEAN panelcanscale = FALSE; |
| |
| SiS_Pr->SiS_LCDResInfo = 0; |
| SiS_Pr->SiS_LCDTypeInfo = 0; |
| SiS_Pr->SiS_LCDInfo = 0; |
| SiS_Pr->PanelHRS = 999; /* HSync start */ |
| SiS_Pr->PanelHRE = 999; /* HSync end */ |
| SiS_Pr->PanelVRS = 999; /* VSync start */ |
| SiS_Pr->PanelVRE = 999; /* VSync end */ |
| SiS_Pr->SiS_NeedRomModeData = FALSE; |
| |
| if(!(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA))) return; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| modexres = SiS_Pr->SiS_ModeResInfo[resinfo].HTotal; |
| modeyres = SiS_Pr->SiS_ModeResInfo[resinfo].VTotal; |
| } |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36); |
| |
| /* For broken BIOSes: Assume 1024x768 */ |
| if(temp == 0) temp = 0x02; |
| |
| if((HwInfo->jChipType >= SIS_661) || (SiS_Pr->SiS_ROMNew)) { |
| SiS_Pr->SiS_LCDTypeInfo = (SiS_GetReg(SiS_Pr->SiS_P3d4,0x39) & 0x7c) >> 2; |
| } else if((HwInfo->jChipType < SIS_315H) || (HwInfo->jChipType >= SIS_661)) { |
| SiS_Pr->SiS_LCDTypeInfo = temp >> 4; |
| } else { |
| SiS_Pr->SiS_LCDTypeInfo = (temp & 0x0F) - 1; |
| } |
| temp &= 0x0f; |
| #ifdef SIS300 |
| if(HwInfo->jChipType < SIS_315H) { |
| /* Very old BIOSes only know 7 sizes (NetVista 2179, 1.01g) */ |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| if(temp < 0x0f) temp &= 0x07; |
| } |
| /* Translate 300 series LCDRes to 315 series for unified usage */ |
| temp = SiS300SeriesLCDRes[temp]; |
| } |
| #endif |
| |
| /* Translate to our internal types */ |
| if(HwInfo->jChipType == SIS_550) { |
| if(temp == Panel310_640x480_2) temp = Panel_640x480_2; |
| if(temp == Panel310_640x480_3) temp = Panel_640x480_3; |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISLVDS) { /* SiS LVDS */ |
| if(temp == Panel310_1280x768) { |
| temp = Panel_1280x768_2; |
| } |
| if(SiS_Pr->SiS_ROMNew) { |
| if(temp == Panel661_1280x800) { |
| temp = Panel_1280x800_2; |
| } |
| } |
| } |
| |
| SiS_Pr->SiS_LCDResInfo = temp; |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) { |
| SiS_Pr->SiS_LCDResInfo = Panel_Barco1366; |
| } else if(SiS_Pr->SiS_CustomT == CUT_PANEL848) { |
| SiS_Pr->SiS_LCDResInfo = Panel_848x480; |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_LCDResInfo < SiS_Pr->SiS_PanelMin301) |
| SiS_Pr->SiS_LCDResInfo = SiS_Pr->SiS_PanelMin301; |
| } else { |
| if(SiS_Pr->SiS_LCDResInfo < SiS_Pr->SiS_PanelMinLVDS) |
| SiS_Pr->SiS_LCDResInfo = SiS_Pr->SiS_PanelMinLVDS; |
| } |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x37); |
| SiS_Pr->SiS_LCDInfo = temp & ~0x000e; |
| /* Need temp below! */ |
| |
| /* These can't scale no matter what */ |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_1280x960: |
| SiS_Pr->SiS_LCDInfo &= ~DontExpandLCD; |
| } |
| |
| panelcanscale = (SiS_Pr->SiS_LCDInfo & DontExpandLCD) ? TRUE : FALSE; |
| |
| if(!SiS_Pr->UsePanelScaler) SiS_Pr->SiS_LCDInfo &= ~DontExpandLCD; |
| else if(SiS_Pr->UsePanelScaler == 1) SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| |
| /* Dual link, Pass 1:1 BIOS default, etc. */ |
| #ifdef SIS315H |
| if(HwInfo->jChipType >= SIS_661) { |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if(temp & 0x08) SiS_Pr->SiS_LCDInfo |= LCDPass11; |
| } |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| if(SiS_Pr->SiS_ROMNew) { |
| if(temp & 0x02) SiS_Pr->SiS_LCDInfo |= LCDDualLink; |
| } else if((myptr = GetLCDStructPtr661(SiS_Pr, HwInfo))) { |
| if(myptr[2] & 0x01) SiS_Pr->SiS_LCDInfo |= LCDDualLink; |
| } |
| } |
| } else if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x39) & 0x01) SiS_Pr->SiS_LCDInfo |= LCDPass11; |
| } |
| if((SiS_Pr->SiS_ROMNew) && (!(SiS_Pr->PanelSelfDetected))) { |
| SiS_Pr->SiS_LCDInfo &= ~(LCDRGB18Bit); |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); |
| if(temp & 0x01) SiS_Pr->SiS_LCDInfo |= LCDRGB18Bit; |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| if(temp & 0x02) SiS_Pr->SiS_LCDInfo |= LCDDualLink; |
| } |
| } else if(!(SiS_Pr->SiS_ROMNew)) { |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| if((SiS_Pr->SiS_CustomT == CUT_CLEVO1024) && |
| (SiS_Pr->SiS_LCDResInfo == Panel_1024x768)) { |
| SiS_Pr->SiS_LCDInfo |= LCDDualLink; |
| } |
| if((SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1680x1050)) { |
| SiS_Pr->SiS_LCDInfo |= LCDDualLink; |
| } |
| } |
| } |
| } |
| #endif |
| |
| /* Pass 1:1 */ |
| if((SiS_Pr->SiS_IF_DEF_LVDS == 1) || (SiS_Pr->SiS_VBType & VB_NoLCD)) { |
| /* Always center screen on LVDS (if scaling is disabled) */ |
| SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_VBType & VB_SISLVDS) { |
| /* Always center screen on SiS LVDS (if scaling is disabled) */ |
| SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| } else { |
| /* By default, pass 1:1 on SiS TMDS (if scaling is supported) */ |
| if(panelcanscale) SiS_Pr->SiS_LCDInfo |= LCDPass11; |
| if(SiS_Pr->CenterScreen == 1) SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| } |
| } |
| |
| SiS_Pr->PanelVCLKIdx300 = VCLK65_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK108_2_315; |
| |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_320x480: SiS_Pr->PanelXRes = 320; SiS_Pr->PanelYRes = 480; |
| SiS_Pr->PanelHT = 400; SiS_Pr->PanelVT = 525; |
| SiS_Pr->PanelVCLKIdx300 = VCLK28; |
| SiS_Pr->PanelVCLKIdx315 = VCLK28; |
| break; |
| case Panel_640x480_2: |
| case Panel_640x480_3: SiS_Pr->PanelXRes = 640; SiS_Pr->PanelYRes = 480; |
| SiS_Pr->PanelVRS = 24; SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx300 = VCLK28; |
| SiS_Pr->PanelVCLKIdx315 = VCLK28; |
| break; |
| case Panel_640x480: SiS_Pr->PanelXRes = 640; SiS_Pr->PanelYRes = 480; |
| SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx300 = VCLK28; |
| SiS_Pr->PanelVCLKIdx315 = VCLK28; |
| break; |
| case Panel_800x600: SiS_Pr->PanelXRes = 800; SiS_Pr->PanelYRes = 600; |
| SiS_Pr->PanelHT = 1056; SiS_Pr->PanelVT = 628; |
| SiS_Pr->PanelHRS = 40; SiS_Pr->PanelHRE = 128; |
| SiS_Pr->PanelVRS = 1; SiS_Pr->PanelVRE = 4; |
| SiS_Pr->PanelVCLKIdx300 = VCLK40; |
| SiS_Pr->PanelVCLKIdx315 = VCLK40; |
| break; |
| case Panel_1024x600: SiS_Pr->PanelXRes = 1024; SiS_Pr->PanelYRes = 600; |
| SiS_Pr->PanelHT = 1344; SiS_Pr->PanelVT = 800; |
| SiS_Pr->PanelHRS = 24; SiS_Pr->PanelHRE = 136; |
| SiS_Pr->PanelVRS = 2 /* 88 */ ; SiS_Pr->PanelVRE = 6; |
| SiS_Pr->PanelVCLKIdx300 = VCLK65_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK65_315; |
| break; |
| case Panel_1024x768: SiS_Pr->PanelXRes = 1024; SiS_Pr->PanelYRes = 768; |
| SiS_Pr->PanelHT = 1344; SiS_Pr->PanelVT = 806; |
| SiS_Pr->PanelHRS = 24; SiS_Pr->PanelHRE = 136; |
| SiS_Pr->PanelVRS = 3; SiS_Pr->PanelVRE = 6; |
| if(HwInfo->jChipType < SIS_315H) { |
| SiS_Pr->PanelHRS = 23; |
| SiS_Pr->PanelVRE = 5; |
| } |
| SiS_Pr->PanelVCLKIdx300 = VCLK65_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK65_315; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1152x768: SiS_Pr->PanelXRes = 1152; SiS_Pr->PanelYRes = 768; |
| SiS_Pr->PanelHT = 1344; SiS_Pr->PanelVT = 806; |
| SiS_Pr->PanelHRS = 24; |
| SiS_Pr->PanelVRS = 3; SiS_Pr->PanelVRE = 6; |
| if(HwInfo->jChipType < SIS_315H) { |
| SiS_Pr->PanelHRS = 23; |
| SiS_Pr->PanelVRE = 5; |
| } |
| SiS_Pr->PanelVCLKIdx300 = VCLK65_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK65_315; |
| break; |
| case Panel_1152x864: SiS_Pr->PanelXRes = 1152; SiS_Pr->PanelYRes = 864; |
| break; |
| case Panel_1280x720: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 720; |
| SiS_Pr->PanelHT = 1650; SiS_Pr->PanelVT = 750; |
| SiS_Pr->PanelHRS = 110; SiS_Pr->PanelHRE = 40; |
| SiS_Pr->PanelVRS = 5; SiS_Pr->PanelVRE = 5; |
| SiS_Pr->PanelVCLKIdx315 = VCLK_1280x720; |
| /* Data above for TMDS (projector); get from BIOS for LVDS */ |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1280x768: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 768; |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| SiS_Pr->PanelHT = 1408; SiS_Pr->PanelVT = 806; |
| SiS_Pr->PanelVCLKIdx300 = VCLK81_300; /* ? */ |
| SiS_Pr->PanelVCLKIdx315 = VCLK81_315; /* ? */ |
| } else { |
| SiS_Pr->PanelHT = 1688; SiS_Pr->PanelVT = 802; |
| SiS_Pr->PanelHRS = 48; SiS_Pr->PanelHRS = 112; |
| SiS_Pr->PanelVRS = 3; SiS_Pr->PanelVRE = 6; |
| SiS_Pr->PanelVCLKIdx300 = VCLK81_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK81_315; |
| } |
| break; |
| case Panel_1280x768_2: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 768; |
| SiS_Pr->PanelHT = 1660; SiS_Pr->PanelVT = 806; |
| SiS_Pr->PanelHRS = 48; SiS_Pr->PanelHRE = 112; |
| SiS_Pr->PanelVRS = 3; SiS_Pr->PanelVRE = 6; |
| SiS_Pr->PanelVCLKIdx315 = VCLK_1280x768_2; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1280x800: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 800; |
| SiS_Pr->PanelHT = 1408; SiS_Pr->PanelVT = 816; |
| SiS_Pr->PanelHRS = 21; SiS_Pr->PanelHRE = 24; |
| SiS_Pr->PanelVRS = 4; SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx315 = VCLK_1280x800_315; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1280x800_2: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 800; |
| SiS_Pr->PanelHT = 1552; SiS_Pr->PanelVT = 812; |
| SiS_Pr->PanelHRS = 48; SiS_Pr->PanelHRE = 112; |
| SiS_Pr->PanelVRS = 4; SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx315 = VCLK_1280x800_315_2; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1280x960: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 960; |
| SiS_Pr->PanelHT = 1800; SiS_Pr->PanelVT = 1000; |
| SiS_Pr->PanelVCLKIdx300 = VCLK108_3_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK108_3_315; |
| if(resinfo == SIS_RI_1280x1024) { |
| SiS_Pr->PanelVCLKIdx300 = VCLK100_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK100_315; |
| } |
| break; |
| case Panel_1280x1024: SiS_Pr->PanelXRes = 1280; SiS_Pr->PanelYRes = 1024; |
| SiS_Pr->PanelHT = 1688; SiS_Pr->PanelVT = 1066; |
| SiS_Pr->PanelHRS = 48; SiS_Pr->PanelHRE = 112; |
| SiS_Pr->PanelVRS = 1; SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx300 = VCLK108_3_300; |
| SiS_Pr->PanelVCLKIdx315 = VCLK108_2_315; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1400x1050: SiS_Pr->PanelXRes = 1400; SiS_Pr->PanelYRes = 1050; |
| SiS_Pr->PanelHT = 1688; SiS_Pr->PanelVT = 1066; |
| SiS_Pr->PanelHRS = 48; SiS_Pr->PanelHRE = 112; /* HRE OK for LVDS, not for LCDA */ |
| SiS_Pr->PanelVRS = 1; SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx315 = VCLK108_2_315; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1600x1200: SiS_Pr->PanelXRes = 1600; SiS_Pr->PanelYRes = 1200; |
| SiS_Pr->PanelHT = 2160; SiS_Pr->PanelVT = 1250; |
| SiS_Pr->PanelHRS = 64; SiS_Pr->PanelHRE = 192; |
| SiS_Pr->PanelVRS = 1; SiS_Pr->PanelVRE = 3; |
| SiS_Pr->PanelVCLKIdx315 = VCLK162_315; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_1680x1050: SiS_Pr->PanelXRes = 1680; SiS_Pr->PanelYRes = 1050; |
| SiS_Pr->PanelHT = 1900; SiS_Pr->PanelVT = 1066; |
| SiS_Pr->PanelHRS = 26; SiS_Pr->PanelHRE = 76; |
| SiS_Pr->PanelVRS = 3; SiS_Pr->PanelVRE = 6; |
| SiS_Pr->PanelVCLKIdx315 = VCLK121_315; |
| SiS_GetLCDInfoBIOS(SiS_Pr, HwInfo); |
| break; |
| case Panel_Barco1366: SiS_Pr->PanelXRes = 1360; SiS_Pr->PanelYRes = 1024; |
| SiS_Pr->PanelHT = 1688; SiS_Pr->PanelVT = 1066; |
| break; |
| case Panel_848x480: SiS_Pr->PanelXRes = 848; SiS_Pr->PanelYRes = 480; |
| SiS_Pr->PanelHT = 1088; SiS_Pr->PanelVT = 525; |
| break; |
| case Panel_Custom: SiS_Pr->PanelXRes = SiS_Pr->CP_MaxX; |
| SiS_Pr->PanelYRes = SiS_Pr->CP_MaxY; |
| SiS_Pr->PanelHT = SiS_Pr->CHTotal; |
| SiS_Pr->PanelVT = SiS_Pr->CVTotal; |
| if(SiS_Pr->CP_PreferredIndex != -1) { |
| SiS_Pr->PanelXRes = SiS_Pr->CP_HDisplay[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelYRes = SiS_Pr->CP_VDisplay[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelHT = SiS_Pr->CP_HTotal[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelVT = SiS_Pr->CP_VTotal[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelHRS = SiS_Pr->CP_HSyncStart[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelHRE = SiS_Pr->CP_HSyncEnd[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelVRS = SiS_Pr->CP_VSyncStart[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelVRE = SiS_Pr->CP_VSyncEnd[SiS_Pr->CP_PreferredIndex]; |
| SiS_Pr->PanelHRS -= SiS_Pr->PanelXRes; |
| SiS_Pr->PanelHRE -= SiS_Pr->PanelHRS; |
| SiS_Pr->PanelVRS -= SiS_Pr->PanelYRes; |
| SiS_Pr->PanelVRE -= SiS_Pr->PanelVRS; |
| if(SiS_Pr->CP_PrefClock) { |
| int idx; |
| SiS_Pr->PanelVCLKIdx315 = VCLK_CUSTOM_315; |
| SiS_Pr->PanelVCLKIdx300 = VCLK_CUSTOM_300; |
| if(HwInfo->jChipType < SIS_315H) idx = VCLK_CUSTOM_300; |
| else idx = VCLK_CUSTOM_315; |
| SiS_Pr->SiS_VCLKData[idx].CLOCK = |
| SiS_Pr->SiS_VBVCLKData[idx].CLOCK = SiS_Pr->CP_PrefClock; |
| SiS_Pr->SiS_VCLKData[idx].SR2B = |
| SiS_Pr->SiS_VBVCLKData[idx].Part4_A = SiS_Pr->CP_PrefSR2B; |
| SiS_Pr->SiS_VCLKData[idx].SR2C = |
| SiS_Pr->SiS_VBVCLKData[idx].Part4_B = SiS_Pr->CP_PrefSR2C; |
| } |
| } |
| break; |
| default: SiS_Pr->PanelXRes = 1024; SiS_Pr->PanelYRes = 768; |
| SiS_Pr->PanelHT = 1344; SiS_Pr->PanelVT = 806; |
| break; |
| } |
| |
| /* Special cases */ |
| if( (SiS_Pr->SiS_IF_DEF_FSTN) || |
| (SiS_Pr->SiS_IF_DEF_DSTN) || |
| (SiS_Pr->SiS_CustomT == CUT_BARCO1366) || |
| (SiS_Pr->SiS_CustomT == CUT_BARCO1024) || |
| (SiS_Pr->SiS_CustomT == CUT_PANEL848) ) { |
| SiS_Pr->PanelHRS = 999; |
| SiS_Pr->PanelHRE = 999; |
| } |
| |
| if( (SiS_Pr->SiS_CustomT == CUT_BARCO1366) || |
| (SiS_Pr->SiS_CustomT == CUT_BARCO1024) || |
| (SiS_Pr->SiS_CustomT == CUT_PANEL848) ) { |
| SiS_Pr->PanelVRS = 999; |
| SiS_Pr->PanelVRE = 999; |
| } |
| |
| /* DontExpand overrule */ |
| if((SiS_Pr->SiS_VBType & VB_SISVB) && (!(SiS_Pr->SiS_VBType & VB_NoLCD))) { |
| |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && (modeflag & NoSupportLCDScale)) { |
| /* No scaling for this mode on any panel (LCD=CRT2)*/ |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| } |
| |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| |
| case Panel_Custom: |
| case Panel_1152x864: |
| case Panel_1280x768: /* TMDS only */ |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| break; |
| |
| case Panel_800x600: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, 0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| case Panel_1024x768: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| 0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| case Panel_1280x720: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| 0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| if(SiS_Pr->PanelHT == 1650) { |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| } |
| break; |
| } |
| case Panel_1280x768_2: { /* LVDS only */ |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| switch(resinfo) { |
| case SIS_RI_1280x720: if(SiS_Pr->UsePanelScaler == -1) { |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| } |
| break; |
| } |
| break; |
| } |
| case Panel_1280x800: { /* SiS TMDS special (Averatec 6200 series) */ |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,SIS_RI_1280x720,SIS_RI_1280x768,0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| case Panel_1280x800_2: { /* SiS LVDS */ |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| switch(resinfo) { |
| case SIS_RI_1280x720: |
| case SIS_RI_1280x768: if(SiS_Pr->UsePanelScaler == -1) { |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| } |
| break; |
| } |
| break; |
| } |
| case Panel_1280x960: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,SIS_RI_1152x864,SIS_RI_1280x720,SIS_RI_1280x768,SIS_RI_1280x800, |
| 0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| case Panel_1280x1024: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,SIS_RI_1152x864,SIS_RI_1280x720,SIS_RI_1280x768,SIS_RI_1280x800, |
| SIS_RI_1280x960,0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| case Panel_1400x1050: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,SIS_RI_1152x864,SIS_RI_1280x768,SIS_RI_1280x800,SIS_RI_1280x960, |
| 0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| switch(resinfo) { |
| case SIS_RI_1280x720: if(SiS_Pr->UsePanelScaler == -1) { |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| } |
| break; |
| case SIS_RI_1280x1024: SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| break; |
| } |
| break; |
| } |
| case Panel_1600x1200: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,SIS_RI_1152x864,SIS_RI_1280x720,SIS_RI_1280x768,SIS_RI_1280x800, |
| SIS_RI_1280x960,SIS_RI_1360x768,SIS_RI_1360x1024,0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| case Panel_1680x1050: { |
| static const UCHAR nonscalingmodes[] = { |
| SIS_RI_720x480, SIS_RI_720x576, SIS_RI_768x576, SIS_RI_800x480, SIS_RI_848x480, |
| SIS_RI_856x480, SIS_RI_960x540, SIS_RI_960x600, SIS_RI_1024x576,SIS_RI_1024x600, |
| SIS_RI_1152x768,SIS_RI_1152x864,SIS_RI_1280x960,SIS_RI_1360x768,SIS_RI_1360x1024, |
| 0xff |
| }; |
| SiS_CheckScaling(SiS_Pr, resinfo, nonscalingmodes); |
| break; |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| if(SiS_Pr->SiS_CustomT == CUT_PANEL848) { |
| SiS_Pr->SiS_LCDInfo = 0x80 | 0x40 | 0x20; /* neg h/v sync, RGB24(D0 = 0) */ |
| } |
| } |
| |
| #ifdef SIS300 |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| if(SiS_Pr->SiS_UseROM) { |
| if((ROMAddr[0x233] == 0x12) && (ROMAddr[0x234] == 0x34)) { |
| if(!(ROMAddr[0x235] & 0x02)) { |
| SiS_Pr->SiS_LCDInfo &= (~DontExpandLCD); |
| } |
| } |
| } |
| } else if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if((SiS_Pr->SiS_SetFlag & SetDOSMode) && ((ModeNo == 0x03) || (ModeNo == 0x10))) { |
| SiS_Pr->SiS_LCDInfo &= (~DontExpandLCD); |
| } |
| } |
| } |
| #endif |
| |
| /* Special cases */ |
| |
| if(modexres == SiS_Pr->PanelXRes && modeyres == SiS_Pr->PanelYRes) { |
| SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_TRUMPION) { |
| SiS_Pr->SiS_LCDInfo |= (DontExpandLCD | LCDPass11); |
| } |
| |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_640x480: |
| SiS_Pr->SiS_LCDInfo |= LCDPass11; |
| break; |
| case Panel_1280x800: |
| /* Don't pass 1:1 by default (TMDS special) */ |
| if(SiS_Pr->CenterScreen == -1) SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| break; |
| case Panel_1280x960: |
| SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| break; |
| case Panel_Custom: |
| if((!SiS_Pr->CP_PrefClock) || |
| (modexres > SiS_Pr->PanelXRes) || (modeyres > SiS_Pr->PanelYRes)) { |
| SiS_Pr->SiS_LCDInfo |= LCDPass11; |
| } |
| break; |
| } |
| |
| if(SiS_Pr->UseCustomMode) { |
| SiS_Pr->SiS_LCDInfo |= (DontExpandLCD | LCDPass11); |
| } |
| |
| /* (In)validate LCDPass11 flag */ |
| if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { |
| SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| } |
| |
| /* LVDS DDA */ |
| if(!((HwInfo->jChipType < SIS_315H) && (SiS_Pr->SiS_SetFlag & SetDOSMode))) { |
| |
| if((SiS_Pr->SiS_IF_DEF_LVDS == 1) || (SiS_Pr->SiS_VBType & VB_NoLCD)) { |
| if(SiS_Pr->SiS_IF_DEF_TRUMPION == 0) { |
| if(ModeNo == 0x12) { |
| if(SiS_Pr->SiS_LCDInfo & LCDPass11) { |
| SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } |
| } else if(ModeNo > 0x13) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x600) { |
| if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { |
| if((resinfo == SIS_RI_800x600) || (resinfo == SIS_RI_400x300)) { |
| SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| if(modeflag & HalfDCLK) { |
| if(SiS_Pr->SiS_IF_DEF_TRUMPION == 1) { |
| SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } else if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_640x480) { |
| SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } else if(ModeNo > 0x13) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(resinfo == SIS_RI_512x384) SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_800x600) { |
| if(resinfo == SIS_RI_400x300) SiS_Pr->SiS_SetFlag |= EnableLVDSDDA; |
| } |
| } |
| } |
| |
| } |
| |
| /* VESA timing */ |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(SiS_Pr->SiS_VBInfo & SetNotSimuMode) { |
| SiS_Pr->SiS_SetFlag |= LCDVESATiming; |
| } |
| } else { |
| SiS_Pr->SiS_SetFlag |= LCDVESATiming; |
| } |
| |
| #ifdef LINUX_KERNEL |
| #ifdef TWDEBUG |
| printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n", |
| SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo); |
| #endif |
| #endif |
| #ifdef LINUX_XF86 |
| xf86DrvMsgVerb(0, X_PROBED, 4, |
| "(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n", |
| SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag); |
| #endif |
| } |
| |
| /*********************************************/ |
| /* GET VCLK */ |
| /*********************************************/ |
| |
| USHORT |
| SiS_GetVCLK2Ptr(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT CRT2Index,VCLKIndex=0,VCLKIndexGEN=0; |
| USHORT modeflag,resinfo,tempbx; |
| const UCHAR *CHTVVCLKPtr = NULL; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| CRT2Index = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| VCLKIndexGEN = (SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02)) >> 2) & 0x03; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| CRT2Index = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| VCLKIndexGEN = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK; |
| if(HwInfo->jChipType < SIS_315H) VCLKIndexGEN &= 0x3f; |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { /* 30x/B/LV */ |
| |
| if(SiS_Pr->SiS_SetFlag & ProgrammingCRT2) { |
| |
| CRT2Index >>= 6; |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { /* LCD */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| VCLKIndex = SiS_Pr->PanelVCLKIdx300; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| VCLKIndex = VCLKIndexGEN; |
| } |
| } else { |
| VCLKIndex = SiS_Pr->PanelVCLKIdx315; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| switch(resinfo) { |
| /* Only those whose IndexGEN doesn't match VBVCLK array */ |
| case SIS_RI_1280x720: VCLKIndex = VCLK_1280x720; break; |
| case SIS_RI_720x480: VCLKIndex = VCLK_720x480; break; |
| case SIS_RI_720x576: VCLKIndex = VCLK_720x576; break; |
| case SIS_RI_768x576: VCLKIndex = VCLK_768x576; break; |
| case SIS_RI_848x480: VCLKIndex = VCLK_848x480; break; |
| case SIS_RI_856x480: VCLKIndex = VCLK_856x480; break; |
| case SIS_RI_800x480: VCLKIndex = VCLK_800x480; break; |
| case SIS_RI_1024x576: VCLKIndex = VCLK_1024x576; break; |
| case SIS_RI_1152x864: VCLKIndex = VCLK_1152x864; break; |
| case SIS_RI_1360x768: VCLKIndex = VCLK_1360x768; break; |
| default: VCLKIndex = VCLKIndexGEN; |
| } |
| |
| if(ModeNo <= 0x13) { |
| if(HwInfo->jChipType <= SIS_315PRO) { |
| if(SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC == 1) VCLKIndex = 0x42; |
| } else { |
| if(SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC == 1) VCLKIndex = 0x00; |
| } |
| } |
| if(HwInfo->jChipType <= SIS_315PRO) { |
| if(VCLKIndex == 0) VCLKIndex = 0x41; |
| if(VCLKIndex == 1) VCLKIndex = 0x43; |
| if(VCLKIndex == 4) VCLKIndex = 0x44; |
| } |
| } |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { /* TV */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if(SiS_Pr->SiS_TVMode & TVRPLLDIV2XO) VCLKIndex = HiTVVCLKDIV2; |
| else VCLKIndex = HiTVVCLK; |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| if(modeflag & Charx8Dot) VCLKIndex = HiTVSimuVCLK; |
| else VCLKIndex = HiTVTextVCLK; |
| } |
| } else if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) VCLKIndex = YPbPr750pVCLK; |
| else if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) VCLKIndex = TVVCLKDIV2; |
| else if(SiS_Pr->SiS_TVMode & TVRPLLDIV2XO) VCLKIndex = TVVCLKDIV2; |
| else VCLKIndex = TVVCLK; |
| |
| if(HwInfo->jChipType < SIS_315H) VCLKIndex += TVCLKBASE_300; |
| else VCLKIndex += TVCLKBASE_315; |
| |
| } else { /* VGA2 */ |
| |
| VCLKIndex = VCLKIndexGEN; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(ModeNo > 0x13) { |
| if( (HwInfo->jChipType == SIS_630) && |
| (HwInfo->jChipRevision >= 0x30)) { |
| if(VCLKIndex == 0x14) VCLKIndex = 0x34; |
| } |
| /* Better VGA2 clock for 1280x1024@75 */ |
| if(VCLKIndex == 0x17) VCLKIndex = 0x45; |
| } |
| } |
| } |
| |
| } else { /* If not programming CRT2 */ |
| |
| VCLKIndex = VCLKIndexGEN; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(ModeNo > 0x13) { |
| if( (HwInfo->jChipType != SIS_630) && |
| (HwInfo->jChipType != SIS_300) ) { |
| if(VCLKIndex == 0x1b) VCLKIndex = 0x48; |
| } |
| } |
| } |
| } |
| |
| } else { /* LVDS */ |
| |
| VCLKIndex = CRT2Index; |
| |
| if(SiS_Pr->SiS_SetFlag & ProgrammingCRT2) { |
| |
| if( (SiS_Pr->SiS_IF_DEF_CH70xx != 0) && (SiS_Pr->SiS_VBInfo & SetCRT2ToTV) ) { |
| |
| VCLKIndex &= 0x1f; |
| tempbx = 0; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) tempbx += 1; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| tempbx += 2; |
| if(SiS_Pr->SiS_ModeType > ModeVGA) { |
| if(SiS_Pr->SiS_CHSOverScan) tempbx = 8; |
| } |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| tempbx = 4; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) tempbx += 1; |
| } else if(SiS_Pr->SiS_TVMode & TVSetPALN) { |
| tempbx = 6; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) tempbx += 1; |
| } |
| } |
| switch(tempbx) { |
| case 0: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKUNTSC; break; |
| case 1: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKONTSC; break; |
| case 2: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKUPAL; break; |
| case 3: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKOPAL; break; |
| case 4: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKUPALM; break; |
| case 5: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKOPALM; break; |
| case 6: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKUPALN; break; |
| case 7: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKOPALN; break; |
| case 8: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKSOPAL; break; |
| default: CHTVVCLKPtr = SiS_Pr->SiS_CHTVVCLKOPAL; break; |
| } |
| VCLKIndex = CHTVVCLKPtr[VCLKIndex]; |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| VCLKIndex = SiS_Pr->PanelVCLKIdx300; |
| } else { |
| VCLKIndex = SiS_Pr->PanelVCLKIdx315; |
| } |
| |
| /* Special Timing: Barco iQ Pro R series */ |
| if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) VCLKIndex = 0x44; |
| |
| /* Special Timing: 848x480 parallel lvds */ |
| if(SiS_Pr->SiS_CustomT == CUT_PANEL848) { |
| if(HwInfo->jChipType < SIS_315H) { |
| VCLKIndex = VCLK34_300; |
| /* if(resinfo == SIS_RI_1360x768) VCLKIndex = ?; */ |
| } else { |
| VCLKIndex = VCLK34_315; |
| /* if(resinfo == SIS_RI_1360x768) VCLKIndex = ?; */ |
| } |
| } |
| |
| } else { |
| |
| VCLKIndex = VCLKIndexGEN; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(ModeNo > 0x13) { |
| if( (HwInfo->jChipType == SIS_630) && |
| (HwInfo->jChipRevision >= 0x30) ) { |
| if(VCLKIndex == 0x14) VCLKIndex = 0x2e; |
| } |
| } |
| } |
| } |
| |
| } else { /* if not programming CRT2 */ |
| |
| VCLKIndex = VCLKIndexGEN; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(ModeNo > 0x13) { |
| if( (HwInfo->jChipType != SIS_630) && |
| (HwInfo->jChipType != SIS_300) ) { |
| if(VCLKIndex == 0x1b) VCLKIndex = 0x48; |
| } |
| #if 0 |
| if(HwInfo->jChipType == SIS_730) { |
| if(VCLKIndex == 0x0b) VCLKIndex = 0x40; /* 1024x768-70 */ |
| if(VCLKIndex == 0x0d) VCLKIndex = 0x41; /* 1024x768-75 */ |
| } |
| #endif |
| } |
| } |
| |
| } |
| |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex); |
| #endif |
| |
| return(VCLKIndex); |
| } |
| |
| /*********************************************/ |
| /* SET CRT2 MODE TYPE REGISTERS */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetCRT2ModeRegs(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT i,j,modeflag; |
| USHORT tempcl,tempah=0; |
| #if defined(SIS300) || defined(SIS315H) |
| USHORT tempbl; |
| #endif |
| #ifdef SIS315H |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT tempah2, tempbl2; |
| #endif |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xAF,0x40); |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2E,0xF7); |
| |
| } else { |
| |
| for(i=0,j=4; i<3; i++,j++) SiS_SetReg(SiS_Pr->SiS_Part1Port,j,0); |
| if(HwInfo->jChipType >= SIS_315H) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x02,0x7F); |
| } |
| |
| tempcl = SiS_Pr->SiS_ModeType; |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* ---- 300 series ---- */ |
| |
| /* For 301BDH: (with LCD via LVDS) */ |
| if(SiS_Pr->SiS_VBType & VB_NoLCD) { |
| tempbl = SiS_GetReg(SiS_Pr->SiS_P3c4,0x32); |
| tempbl &= 0xef; |
| tempbl |= 0x02; |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToTV) || (SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC)) { |
| tempbl |= 0x10; |
| tempbl &= 0xfd; |
| } |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x32,tempbl); |
| } |
| |
| if(ModeNo > 0x13) { |
| tempcl -= ModeVGA; |
| if((tempcl > 0) || (tempcl == 0)) { /* tempcl is USHORT -> always true! */ |
| tempah = ((0x10 >> tempcl) | 0x80); |
| } |
| } else tempah = 0x80; |
| |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0xA0; |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* ------- 315/330 series ------ */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2e,0x08); |
| } |
| } |
| |
| if(ModeNo > 0x13) { |
| tempcl -= ModeVGA; |
| if((tempcl > 0) || (tempcl == 0)) { /* tempcl is USHORT -> always true! */ |
| tempah = (0x08 >> tempcl); |
| if (tempah == 0) tempah = 1; |
| tempah |= 0x40; |
| } |
| } else tempah = 0x40; |
| |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0x50; |
| |
| #endif /* SIS315H */ |
| |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) tempah = 0; |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah); |
| } else { |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah); |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(IS_SIS740) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah); |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| tempah = 0x01; |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| tempah |= 0x02; |
| } |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC)) { |
| tempah ^= 0x05; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) { |
| tempah ^= 0x01; |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) tempah = 0; |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| tempah = (tempah << 5) & 0xFF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x01,tempah); |
| tempah = (tempah >> 5) & 0xFF; |
| |
| } else { |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2E,0xF8,tempah); |
| |
| } |
| |
| if((SiS_Pr->SiS_ModeType == ModeVGA) && (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode))) { |
| tempah |= 0x10; |
| } |
| |
| tempah |= 0x80; |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| if(SiS_Pr->PanelXRes < 1280 && SiS_Pr->PanelYRes < 960) tempah &= ~0x80; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(!(SiS_Pr->SiS_TVMode & (TVSetYPbPr750p | TVSetYPbPr525p))) { |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| tempah |= 0x20; |
| } |
| } |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0D,0x40,tempah); |
| |
| tempah = 0x80; |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| if(SiS_Pr->PanelXRes < 1280 && SiS_Pr->PanelYRes < 960) tempah = 0; |
| } |
| |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempah |= 0x40; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(SiS_Pr->SiS_TVMode & TVRPLLDIV2XO) { |
| tempah |= 0x40; |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0C,tempah); |
| |
| } else { /* LVDS */ |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| |
| #ifdef SIS315H |
| /* LVDS can only be slave in 8bpp modes */ |
| tempah = 0x80; |
| if((modeflag & CRT2Mode) && (SiS_Pr->SiS_ModeType > ModeVGA)) { |
| if(SiS_Pr->SiS_VBInfo & DriverMode) { |
| tempah |= 0x02; |
| } |
| } |
| |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| tempah |= 0x02; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| tempah ^= 0x01; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) { |
| tempah = 1; |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2e,0xF0,tempah); |
| #endif |
| |
| } else { |
| |
| #ifdef SIS300 |
| tempah = 0; |
| if( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) && (SiS_Pr->SiS_ModeType > ModeVGA) ) { |
| tempah |= 0x02; |
| } |
| tempah <<= 5; |
| |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) tempah = 0; |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x01,tempah); |
| #endif |
| |
| } |
| |
| } |
| |
| } /* LCDA */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| |
| #ifdef SIS315H |
| unsigned char bridgerev = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01); |
| |
| /* The following is nearly unpreditable and varies from machine |
| * to machine. Especially the 301DH seems to be a real trouble |
| * maker. Some BIOSes simply set the registers (like in the |
| * NoLCD-if-statements here), some set them according to the |
| * LCDA stuff. It is very likely that some machines are not |
| * treated correctly in the following, very case-orientated |
| * code. What do I do then...? |
| */ |
| |
| /* 740 variants match for 30xB, 301B-DH, 30xLV */ |
| |
| if(!(IS_SIS740)) { |
| tempah = 0x04; /* For all bridges */ |
| tempbl = 0xfb; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| tempah = 0x00; |
| if(SiS_IsDualEdge(SiS_Pr, HwInfo)) { |
| tempbl = 0xff; |
| } |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,tempbl,tempah); |
| } |
| |
| /* The following two are responsible for eventually wrong colors |
| * in TV output. The DH (VB_NoLCD) conditions are unknown; the |
| * b0 was found in some 651 machine (Pim; P4_23=0xe5); the b1 version |
| * in a 650 box (Jake). What is the criteria? |
| */ |
| |
| if((IS_SIS740) || (HwInfo->jChipType >= SIS_661) || (SiS_Pr->SiS_ROMNew)) { |
| tempah = 0x30; |
| tempbl = 0xc0; |
| if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) || |
| ((SiS_Pr->SiS_ROMNew) && (!(ROMAddr[0x5b] & 0x04)))) { |
| tempah = 0x00; |
| tempbl = 0x00; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2c,0xcf,tempah); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x21,0x3f,tempbl); |
| } else if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| /* Fixes "TV-blue-bug" on 315+301 */ |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2c,0xcf); /* For 301 */ |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f); |
| } else if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2c,0x30); /* For 30xLV */ |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x21,0xc0); |
| } else if((SiS_Pr->SiS_VBType & VB_NoLCD) && (bridgerev == 0xb0)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2c,0x30); /* For 30xB-DH rev b0 (or "DH on 651"?) */ |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x21,0xc0); |
| } else { |
| tempah = 0x30; tempah2 = 0xc0; /* For 30xB (and 301BDH rev b1) */ |
| tempbl = 0xcf; tempbl2 = 0x3f; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| tempah = tempah2 = 0x00; |
| if(SiS_IsDualEdge(SiS_Pr, HwInfo)) { |
| tempbl = tempbl2 = 0xff; |
| } |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2c,tempbl,tempah); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x21,tempbl2,tempah2); |
| } |
| |
| if(IS_SIS740) { |
| tempah = 0x80; |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) tempah = 0x00; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,0x7f,tempah); |
| } else { |
| tempah = 0x00; |
| tempbl = 0x7f; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| tempbl = 0xff; |
| if(!(SiS_IsDualEdge(SiS_Pr, HwInfo))) tempah = 0x80; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,tempbl,tempah); |
| } |
| |
| #endif /* SIS315H */ |
| |
| } else if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| |
| #ifdef SIS300 |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f); |
| |
| if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) || |
| ((SiS_Pr->SiS_VBType & VB_NoLCD) && |
| (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD))) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x23,0x7F); |
| } else { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x23,0x80); |
| } |
| #endif |
| |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x0D,0x80); |
| if(SiS_Pr->SiS_VBType & VB_SIS301C) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x3A,0xC0); |
| } |
| } |
| |
| } else { /* LVDS */ |
| |
| #ifdef SIS315H |
| if(HwInfo->jChipType >= SIS_315H) { |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| |
| tempah = 0x04; |
| tempbl = 0xfb; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| tempah = 0x00; |
| if(SiS_IsDualEdge(SiS_Pr, HwInfo)) tempbl = 0xff; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,tempbl,tempah); |
| |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb); |
| } |
| |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2c,0x30); |
| |
| } else if(HwInfo->jChipType == SIS_550) { |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2c,0x30); |
| |
| } |
| |
| } |
| #endif |
| |
| } |
| |
| } |
| |
| /*********************************************/ |
| /* GET RESOLUTION DATA */ |
| /*********************************************/ |
| |
| USHORT |
| SiS_GetResInfo(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| if(ModeNo <= 0x13) return((USHORT)SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo); |
| else return((USHORT)SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO); |
| } |
| |
| static void |
| SiS_GetCRT2ResInfo(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT xres,yres,modeflag=0,resindex; |
| |
| if(SiS_Pr->UseCustomMode) { |
| xres = SiS_Pr->CHDisplay; |
| if(SiS_Pr->CModeFlag & HalfDCLK) xres *= 2; |
| SiS_Pr->SiS_VGAHDE = SiS_Pr->SiS_HDE = xres; |
| yres = SiS_Pr->CVDisplay; |
| if(SiS_Pr->CModeFlag & DoubleScanMode) yres *= 2; |
| SiS_Pr->SiS_VGAVDE = SiS_Pr->SiS_VDE = yres; |
| return; |
| } |
| |
| resindex = SiS_GetResInfo(SiS_Pr,ModeNo,ModeIdIndex); |
| |
| if(ModeNo <= 0x13) { |
| xres = SiS_Pr->SiS_StResInfo[resindex].HTotal; |
| yres = SiS_Pr->SiS_StResInfo[resindex].VTotal; |
| } else { |
| xres = SiS_Pr->SiS_ModeResInfo[resindex].HTotal; |
| yres = SiS_Pr->SiS_ModeResInfo[resindex].VTotal; |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| } |
| |
| if(!SiS_Pr->SiS_IF_DEF_DSTN && !SiS_Pr->SiS_IF_DEF_FSTN) { |
| |
| if((HwInfo->jChipType >= SIS_315H) && (SiS_Pr->SiS_IF_DEF_LVDS == 1)) { |
| if((ModeNo != 0x03) && (SiS_Pr->SiS_SetFlag & SetDOSMode)) { |
| if(yres == 350) yres = 400; |
| } |
| if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x3a) & 0x01) { |
| if(ModeNo == 0x12) yres = 400; |
| } |
| } |
| |
| if(modeflag & HalfDCLK) xres *= 2; |
| if(modeflag & DoubleScanMode) yres *= 2; |
| |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_SISVB) && (!(SiS_Pr->SiS_VBType & VB_NoLCD))) { |
| |
| #if 0 |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCDA | SetCRT2ToLCD | SetCRT2ToHiVision)) { |
| if(xres == 720) xres = 640; |
| } |
| #endif |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_1024x768: |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) { |
| if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { |
| if(yres == 350) yres = 357; |
| if(yres == 400) yres = 420; |
| if(yres == 480) yres = 525; |
| } |
| } |
| break; |
| case Panel_1280x1024: |
| if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { |
| /* BIOS bug - does this regardless of scaling */ |
| if(yres == 400) yres = 405; |
| } |
| if(yres == 350) yres = 360; |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) { |
| if(yres == 360) yres = 375; |
| } |
| break; |
| case Panel_1600x1200: |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) { |
| if(yres == 1024) yres = 1056; |
| } |
| break; |
| } |
| } |
| |
| } else { |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToHiVision)) { |
| if(xres == 720) xres = 640; |
| } |
| } else if(xres == 720) xres = 640; |
| |
| if(SiS_Pr->SiS_SetFlag & SetDOSMode) { |
| yres = 400; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_GetReg(SiS_Pr->SiS_P3c4,0x17) & 0x80) yres = 480; |
| } else { |
| if(SiS_GetReg(SiS_Pr->SiS_P3c4,0x13) & 0x80) yres = 480; |
| } |
| if(SiS_Pr->SiS_IF_DEF_DSTN || SiS_Pr->SiS_IF_DEF_FSTN) yres = 480; |
| } |
| |
| } |
| SiS_Pr->SiS_VGAHDE = SiS_Pr->SiS_HDE = xres; |
| SiS_Pr->SiS_VGAVDE = SiS_Pr->SiS_VDE = yres; |
| } |
| |
| /*********************************************/ |
| /* GET CRT2 TIMING DATA */ |
| /*********************************************/ |
| |
| static BOOLEAN |
| SiS_GetLVDSCRT1Ptr(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, USHORT *ResIndex, |
| USHORT *DisplayType) |
| { |
| USHORT modeflag=0; |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) return FALSE; |
| } |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) return FALSE; |
| } else |
| return FALSE; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| (*ResIndex) = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| (*ResIndex) = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| } |
| |
| (*ResIndex) &= 0x3F; |
| |
| if((SiS_Pr->SiS_IF_DEF_CH70xx) && (SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) { |
| (*DisplayType) = 18; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) (*DisplayType)++; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| (*DisplayType) += 2; |
| if(SiS_Pr->SiS_ModeType > ModeVGA) { |
| if(SiS_Pr->SiS_CHSOverScan) (*DisplayType) = 99; |
| } |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| (*DisplayType) = 18; /* PALM uses NTSC data */ |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) (*DisplayType)++; |
| } else if(SiS_Pr->SiS_TVMode & TVSetPALN) { |
| (*DisplayType) = 20; /* PALN uses PAL data */ |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) (*DisplayType)++; |
| } |
| } |
| } else { |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_640x480: (*DisplayType) = 50; break; |
| case Panel_640x480_2: (*DisplayType) = 52; break; |
| case Panel_640x480_3: (*DisplayType) = 54; break; |
| case Panel_800x600: (*DisplayType) = 0; break; |
| case Panel_1024x600: (*DisplayType) = 23; break; |
| case Panel_1024x768: (*DisplayType) = 4; break; |
| case Panel_1152x768: (*DisplayType) = 27; break; |
| case Panel_1280x768: (*DisplayType) = 40; break; |
| case Panel_1280x1024: (*DisplayType) = 8; break; |
| case Panel_1400x1050: (*DisplayType) = 14; break; |
| case Panel_1600x1200: (*DisplayType) = 36; break; |
| default: return FALSE; |
| } |
| |
| if(modeflag & HalfDCLK) (*DisplayType)++; |
| |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_640x480: |
| case Panel_640x480_2: |
| case Panel_640x480_3: |
| break; |
| default: |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) (*DisplayType) += 2; |
| } |
| |
| if(SiS_Pr->SiS_LCDInfo & LCDPass11) { |
| (*DisplayType) = 12; |
| if(modeflag & HalfDCLK) (*DisplayType)++; |
| } |
| } |
| |
| #if 0 |
| if(SiS_Pr->SiS_IF_DEF_FSTN) { |
| if(SiS_Pr->SiS_LCDResInfo == SiS_Pr->SiS_Panel320x480){ |
| (*DisplayType) = 22; |
| } |
| } |
| #endif |
| |
| return TRUE; |
| } |
| |
| static void |
| SiS_GetCRT2Ptr(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex,USHORT *CRT2Index,USHORT *ResIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT tempbx=0,tempal=0,resinfo=0; |
| |
| if(ModeNo <= 0x13) { |
| tempal = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else { |
| tempal = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_IF_DEF_LVDS == 0)) { |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { /* LCD */ |
| |
| tempbx = SiS_Pr->SiS_LCDResInfo; |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) tempbx += 32; |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1680x1050) { |
| if (resinfo == SIS_RI_1280x800) tempal = 9; |
| else if(resinfo == SIS_RI_1400x1050) tempal = 11; |
| } else if((SiS_Pr->SiS_LCDResInfo == Panel_1280x800) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1280x800_2)) { |
| if (resinfo == SIS_RI_1280x768) tempal = 9; |
| } |
| |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| /* Pass 1:1 only (center-screen handled outside) */ |
| /* This is never called for the panel's native resolution */ |
| /* since Pass1:1 will not be set in this case */ |
| tempbx = 100; |
| if(ModeNo >= 0x13) { |
| tempal = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC_NS; |
| } |
| } |
| |
| #ifdef SIS315H |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { |
| tempbx = 200; |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) tempbx++; |
| } |
| } |
| } |
| #endif |
| |
| } else { /* TV */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| /* if(SiS_Pr->SiS_VGAVDE > 480) SiS_Pr->SiS_TVMode &= (~TVSetTVSimuMode); */ |
| tempbx = 2; |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| tempbx = 13; |
| if(!(SiS_Pr->SiS_TVMode & TVSetTVSimuMode)) tempbx = 14; |
| } |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) tempbx = 7; |
| else if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) tempbx = 6; |
| else tempbx = 5; |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) tempbx += 5; |
| } else { |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) tempbx = 3; |
| else tempbx = 4; |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) tempbx += 5; |
| } |
| |
| } |
| |
| tempal &= 0x3F; |
| |
| if(ModeNo > 0x13) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoHiVision) { |
| if(tempal == 6) tempal = 7; |
| if((resinfo == SIS_RI_720x480) || |
| (resinfo == SIS_RI_720x576) || |
| (resinfo == SIS_RI_768x576)) { |
| tempal = 6; |
| if(SiS_Pr->SiS_TVMode & (TVSetPAL | TVSetPALN)) { |
| if(resinfo == SIS_RI_720x480) tempal = 9; |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) { |
| if(resinfo == SIS_RI_1024x768) tempal = 8; |
| } |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) { |
| if((resinfo == SIS_RI_720x576) || |
| (resinfo == SIS_RI_768x576)) { |
| tempal = 8; |
| } |
| if(resinfo == SIS_RI_1280x720) tempal = 9; |
| } |
| } |
| } |
| } |
| |
| *CRT2Index = tempbx; |
| *ResIndex = tempal; |
| |
| } else { /* LVDS, 301B-DH (if running on LCD) */ |
| |
| tempbx = 0; |
| if((SiS_Pr->SiS_IF_DEF_CH70xx) && (SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) { |
| |
| tempbx = 10; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) tempbx += 1; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| tempbx += 2; |
| if(SiS_Pr->SiS_ModeType > ModeVGA) { |
| if(SiS_Pr->SiS_CHSOverScan) tempbx = 99; |
| } |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| tempbx = 90; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) tempbx += 1; |
| } else if(SiS_Pr->SiS_TVMode & TVSetPALN) { |
| tempbx = 92; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) tempbx += 1; |
| } |
| } |
| |
| } else { |
| |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_640x480: tempbx = 6; break; |
| case Panel_640x480_2: |
| case Panel_640x480_3: tempbx = 30; break; |
| case Panel_800x600: tempbx = 0; break; |
| case Panel_1024x600: tempbx = 15; break; |
| case Panel_1024x768: tempbx = 2; break; |
| case Panel_1152x768: tempbx = 17; break; |
| case Panel_1280x768: tempbx = 18; break; |
| case Panel_1280x1024: tempbx = 4; break; |
| case Panel_1400x1050: tempbx = 8; break; |
| case Panel_1600x1200: tempbx = 21; break; |
| case Panel_Barco1366: tempbx = 80; break; |
| } |
| |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_640x480: |
| case Panel_640x480_2: |
| case Panel_640x480_3: |
| break; |
| default: |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++; |
| } |
| |
| if(SiS_Pr->SiS_LCDInfo & LCDPass11) tempbx = 7; |
| |
| if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) { |
| tempbx = 82; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++; |
| } else if(SiS_Pr->SiS_CustomT == CUT_PANEL848) { |
| tempbx = 84; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++; |
| } |
| |
| if((SiS_Pr->SiS_CustomT != CUT_BARCO1366) && |
| (SiS_Pr->SiS_CustomT != CUT_PANEL848)) { |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && |
| (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| tempal = 0; |
| } |
| } |
| |
| } |
| |
| (*CRT2Index) = tempbx; |
| (*ResIndex) = tempal & 0x1F; |
| } |
| } |
| |
| static void |
| SiS_GetRAMDAC2DATA(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex,PSIS_HW_INFO HwInfo) |
| { |
| USHORT tempax=0,tempbx=0; |
| USHORT temp1=0,modeflag=0,tempcx=0; |
| USHORT index; |
| |
| SiS_Pr->SiS_RVBHCMAX = 1; |
| SiS_Pr->SiS_RVBHCFACT = 1; |
| |
| if(ModeNo <= 0x13) { |
| |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| index = SiS_GetModePtr(SiS_Pr,ModeNo,ModeIdIndex); |
| |
| tempax = SiS_Pr->SiS_StandTable[index].CRTC[0]; |
| tempbx = SiS_Pr->SiS_StandTable[index].CRTC[6]; |
| temp1 = SiS_Pr->SiS_StandTable[index].CRTC[7]; |
| |
| } else { |
| |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| index = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; |
| |
| tempax = SiS_Pr->SiS_CRT1Table[index].CR[0]; |
| tempax |= (SiS_Pr->SiS_CRT1Table[index].CR[14] << 8); |
| tempax &= 0x03FF; |
| tempbx = SiS_Pr->SiS_CRT1Table[index].CR[6]; |
| tempcx = SiS_Pr->SiS_CRT1Table[index].CR[13] << 8; |
| tempcx &= 0x0100; |
| tempcx <<= 2; |
| tempbx |= tempcx; |
| temp1 = SiS_Pr->SiS_CRT1Table[index].CR[7]; |
| |
| } |
| |
| if(temp1 & 0x01) tempbx |= 0x0100; |
| if(temp1 & 0x20) tempbx |= 0x0200; |
| |
| tempax += 5; |
| |
| /* Charx8Dot is no more used (and assumed), so we set it */ |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| modeflag |= Charx8Dot; |
| } |
| |
| if(modeflag & Charx8Dot) tempax *= 8; |
| else tempax *= 9; |
| |
| if(modeflag & HalfDCLK) tempax <<= 1; |
| |
| tempbx++; |
| |
| SiS_Pr->SiS_VGAHT = SiS_Pr->SiS_HT = tempax; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->SiS_VT = tempbx; |
| } |
| |
| static void |
| SiS_GetCRT2DataLVDS(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT CRT2Index, ResIndex; |
| const SiS_LVDSDataStruct *LVDSData = NULL; |
| |
| SiS_GetCRT2ResInfo(SiS_Pr, ModeNo, ModeIdIndex, HwInfo); |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| SiS_Pr->SiS_RVBHCMAX = 1; |
| SiS_Pr->SiS_RVBHCFACT = 1; |
| SiS_Pr->SiS_NewFlickerMode = 0; |
| SiS_Pr->SiS_RVBHRS = 50; |
| SiS_Pr->SiS_RY1COE = 0; |
| SiS_Pr->SiS_RY2COE = 0; |
| SiS_Pr->SiS_RY3COE = 0; |
| SiS_Pr->SiS_RY4COE = 0; |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| |
| #ifdef SIS315H |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if(SiS_Pr->SiS_LCDInfo & LCDPass11) { |
| if(SiS_Pr->UseCustomMode) { |
| SiS_Pr->SiS_VGAHT = SiS_Pr->SiS_HT = SiS_Pr->CHTotal; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->SiS_VT = SiS_Pr->CVTotal; |
| } else { |
| if(ModeNo < 0x13) { |
| ResIndex = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else { |
| ResIndex = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC_NS; |
| } |
| SiS_Pr->SiS_VGAHT = SiS_Pr->SiS_NoScaleData[ResIndex].VGAHT; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->SiS_NoScaleData[ResIndex].VGAVT; |
| SiS_Pr->SiS_HT = SiS_Pr->SiS_NoScaleData[ResIndex].LCDHT; |
| SiS_Pr->SiS_VT = SiS_Pr->SiS_NoScaleData[ResIndex].LCDVT; |
| } |
| } else { |
| SiS_Pr->SiS_VGAHT = SiS_Pr->SiS_HT = SiS_Pr->PanelHT; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->SiS_VT = SiS_Pr->PanelVT; |
| } |
| } else { |
| /* This handles custom modes and custom panels */ |
| SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes; |
| SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes; |
| SiS_Pr->SiS_HT = SiS_Pr->PanelHT; |
| SiS_Pr->SiS_VT = SiS_Pr->PanelVT; |
| SiS_Pr->SiS_VGAHT = SiS_Pr->PanelHT - (SiS_Pr->PanelXRes - SiS_Pr->SiS_VGAHDE); |
| SiS_Pr->SiS_VGAVT = SiS_Pr->PanelVT - (SiS_Pr->PanelYRes - SiS_Pr->SiS_VGAVDE); |
| } |
| |
| SiS_CalcLCDACRT1Timing(SiS_Pr,ModeNo,ModeIdIndex); |
| |
| #endif |
| |
| } else { |
| |
| /* 301BDH needs LVDS Data */ |
| if((SiS_Pr->SiS_VBType & VB_NoLCD) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) { |
| SiS_Pr->SiS_IF_DEF_LVDS = 1; |
| } |
| |
| SiS_GetCRT2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, |
| &CRT2Index, &ResIndex, HwInfo); |
| |
| /* 301BDH needs LVDS Data */ |
| if((SiS_Pr->SiS_VBType & VB_NoLCD) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) { |
| SiS_Pr->SiS_IF_DEF_LVDS = 0; |
| } |
| |
| switch (CRT2Index) { |
| case 0: LVDSData = SiS_Pr->SiS_LVDS800x600Data_1; break; |
| case 1: LVDSData = SiS_Pr->SiS_LVDS800x600Data_2; break; |
| case 2: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1; break; |
| case 3: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_2; break; |
| case 4: LVDSData = SiS_Pr->SiS_LVDS1280x1024Data_1; break; |
| case 5: LVDSData = SiS_Pr->SiS_LVDS1280x1024Data_2; break; |
| case 6: LVDSData = SiS_Pr->SiS_LVDS640x480Data_1; break; |
| case 7: LVDSData = SiS_Pr->SiS_LVDSXXXxXXXData_1; break; |
| case 8: LVDSData = SiS_Pr->SiS_LVDS1400x1050Data_1; break; |
| case 9: LVDSData = SiS_Pr->SiS_LVDS1400x1050Data_2; break; |
| case 10: LVDSData = SiS_Pr->SiS_CHTVUNTSCData; break; |
| case 11: LVDSData = SiS_Pr->SiS_CHTVONTSCData; break; |
| case 12: LVDSData = SiS_Pr->SiS_CHTVUPALData; break; |
| case 13: LVDSData = SiS_Pr->SiS_CHTVOPALData; break; |
| case 14: LVDSData = SiS_Pr->SiS_LVDS320x480Data_1; break; |
| case 15: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_1; break; |
| case 16: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_2; break; |
| case 17: LVDSData = SiS_Pr->SiS_LVDS1152x768Data_1; break; |
| case 18: LVDSData = SiS_Pr->SiS_LVDS1152x768Data_2; break; |
| case 19: LVDSData = SiS_Pr->SiS_LVDS1280x768Data_1; break; |
| case 20: LVDSData = SiS_Pr->SiS_LVDS1280x768Data_2; break; |
| case 21: LVDSData = SiS_Pr->SiS_LVDS1600x1200Data_1; break; |
| case 22: LVDSData = SiS_Pr->SiS_LVDS1600x1200Data_2; break; |
| case 30: LVDSData = SiS_Pr->SiS_LVDS640x480Data_2; break; |
| case 80: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_1; break; |
| case 81: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_2; break; |
| case 82: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_1; break; |
| case 83: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_2; break; |
| case 84: LVDSData = SiS_Pr->SiS_LVDS848x480Data_1; break; |
| case 85: LVDSData = SiS_Pr->SiS_LVDS848x480Data_2; break; |
| case 90: LVDSData = SiS_Pr->SiS_CHTVUPALMData; break; |
| case 91: LVDSData = SiS_Pr->SiS_CHTVOPALMData; break; |
| case 92: LVDSData = SiS_Pr->SiS_CHTVUPALNData; break; |
| case 93: LVDSData = SiS_Pr->SiS_CHTVOPALNData; break; |
| case 99: LVDSData = SiS_Pr->SiS_CHTVSOPALData; break; /* Super Overscan */ |
| default: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1; break; |
| } |
| |
| SiS_Pr->SiS_VGAHT = (LVDSData+ResIndex)->VGAHT; |
| SiS_Pr->SiS_VGAVT = (LVDSData+ResIndex)->VGAVT; |
| SiS_Pr->SiS_HT = (LVDSData+ResIndex)->LCDHT; |
| SiS_Pr->SiS_VT = (LVDSData+ResIndex)->LCDVT; |
| |
| if(!(SiS_Pr->SiS_VBType & VB_SISVB)) { |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| if((!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) || (SiS_Pr->SiS_SetFlag & SetDOSMode)) { |
| SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes; |
| SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes; |
| if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) { |
| if(ResIndex < 0x08) { |
| SiS_Pr->SiS_HDE = 1280; |
| SiS_Pr->SiS_VDE = 1024; |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| static void |
| SiS_GetCRT2Data301(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = NULL; |
| USHORT tempax,tempbx,modeflag,romptr=0; |
| USHORT resinfo,CRT2Index,ResIndex; |
| const SiS_LCDDataStruct *LCDPtr = NULL; |
| const SiS_TVDataStruct *TVPtr = NULL; |
| #ifdef SIS315H |
| SHORT resinfo661; |
| #endif |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| resinfo = 0; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| #ifdef SIS315H |
| resinfo661 = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].ROMMODEIDX661; |
| if( (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && |
| (SiS_Pr->SiS_SetFlag & LCDVESATiming) && |
| (resinfo661 >= 0) && |
| (SiS_Pr->SiS_NeedRomModeData) ) { |
| if((ROMAddr = GetLCDStructPtr661(SiS_Pr, HwInfo))) { |
| if((romptr = (SISGETROMW(21)))) { |
| romptr += (resinfo661 * 10); |
| ROMAddr = HwInfo->pjVirtualRomBase; |
| } |
| } |
| } |
| #endif |
| } |
| |
| SiS_Pr->SiS_NewFlickerMode = 0; |
| SiS_Pr->SiS_RVBHRS = 50; |
| SiS_Pr->SiS_RY1COE = 0; |
| SiS_Pr->SiS_RY2COE = 0; |
| SiS_Pr->SiS_RY3COE = 0; |
| SiS_Pr->SiS_RY4COE = 0; |
| |
| SiS_GetCRT2ResInfo(SiS_Pr,ModeNo,ModeIdIndex,HwInfo); |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC){ |
| |
| if(SiS_Pr->UseCustomMode) { |
| |
| SiS_Pr->SiS_RVBHCMAX = 1; |
| SiS_Pr->SiS_RVBHCFACT = 1; |
| SiS_Pr->SiS_VGAHT = SiS_Pr->CHTotal; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->CVTotal; |
| SiS_Pr->SiS_HT = SiS_Pr->CHTotal; |
| SiS_Pr->SiS_VT = SiS_Pr->CVTotal; |
| SiS_Pr->SiS_HDE = SiS_Pr->SiS_VGAHDE; |
| SiS_Pr->SiS_VDE = SiS_Pr->SiS_VGAVDE; |
| |
| } else { |
| |
| SiS_GetRAMDAC2DATA(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| |
| SiS_GetCRT2Ptr(SiS_Pr,ModeNo,ModeIdIndex,RefreshRateTableIndex, |
| &CRT2Index,&ResIndex,HwInfo); |
| |
| switch(CRT2Index) { |
| case 2: TVPtr = SiS_Pr->SiS_ExtHiTVData; break; |
| case 3: TVPtr = SiS_Pr->SiS_ExtPALData; break; |
| case 4: TVPtr = SiS_Pr->SiS_ExtNTSCData; break; |
| case 5: TVPtr = SiS_Pr->SiS_Ext525iData; break; |
| case 6: TVPtr = SiS_Pr->SiS_Ext525pData; break; |
| case 7: TVPtr = SiS_Pr->SiS_Ext750pData; break; |
| case 8: TVPtr = SiS_Pr->SiS_StPALData; break; |
| case 9: TVPtr = SiS_Pr->SiS_StNTSCData; break; |
| case 10: TVPtr = SiS_Pr->SiS_St525iData; break; |
| case 11: TVPtr = SiS_Pr->SiS_St525pData; break; |
| case 12: TVPtr = SiS_Pr->SiS_St750pData; break; |
| case 13: TVPtr = SiS_Pr->SiS_St1HiTVData; break; |
| case 14: TVPtr = SiS_Pr->SiS_St2HiTVData; break; |
| default: TVPtr = SiS_Pr->SiS_StPALData; break; |
| } |
| |
| SiS_Pr->SiS_RVBHCMAX = (TVPtr+ResIndex)->RVBHCMAX; |
| SiS_Pr->SiS_RVBHCFACT = (TVPtr+ResIndex)->RVBHCFACT; |
| SiS_Pr->SiS_VGAHT = (TVPtr+ResIndex)->VGAHT; |
| SiS_Pr->SiS_VGAVT = (TVPtr+ResIndex)->VGAVT; |
| SiS_Pr->SiS_HDE = (TVPtr+ResIndex)->TVHDE; |
| SiS_Pr->SiS_VDE = (TVPtr+ResIndex)->TVVDE; |
| SiS_Pr->SiS_RVBHRS = (TVPtr+ResIndex)->RVBHRS; |
| SiS_Pr->SiS_NewFlickerMode = (TVPtr+ResIndex)->FlickerMode; |
| if(modeflag & HalfDCLK) { |
| SiS_Pr->SiS_RVBHRS = (TVPtr+ResIndex)->HALFRVBHRS; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| |
| if((resinfo == SIS_RI_1024x768) || |
| (resinfo == SIS_RI_1280x1024) || |
| (resinfo == SIS_RI_1280x720)) { |
| SiS_Pr->SiS_NewFlickerMode = 0x40; |
| } |
| |
| if(SiS_Pr->SiS_VGAVDE == 350) SiS_Pr->SiS_TVMode |= TVSetTVSimuMode; |
| |
| SiS_Pr->SiS_HT = ExtHiTVHT; |
| SiS_Pr->SiS_VT = ExtHiTVVT; |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| SiS_Pr->SiS_HT = StHiTVHT; |
| SiS_Pr->SiS_VT = StHiTVVT; |
| #if 0 |
| if(!(modeflag & Charx8Dot)) { |
| SiS_Pr->SiS_HT = StHiTextTVHT; |
| SiS_Pr->SiS_VT = StHiTextTVVT; |
| } |
| #endif |
| } |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) { |
| SiS_Pr->SiS_HT = 1650; |
| SiS_Pr->SiS_VT = 750; |
| } else if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) { |
| SiS_Pr->SiS_HT = NTSCHT; |
| SiS_Pr->SiS_VT = NTSCVT; |
| } else { |
| SiS_Pr->SiS_HT = NTSCHT; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) SiS_Pr->SiS_HT = NTSC2HT; |
| SiS_Pr->SiS_VT = NTSCVT; |
| } |
| |
| } else { |
| |
| SiS_Pr->SiS_RY1COE = (TVPtr+ResIndex)->RY1COE; |
| SiS_Pr->SiS_RY2COE = (TVPtr+ResIndex)->RY2COE; |
| SiS_Pr->SiS_RY3COE = (TVPtr+ResIndex)->RY3COE; |
| SiS_Pr->SiS_RY4COE = (TVPtr+ResIndex)->RY4COE; |
| |
| if(modeflag & HalfDCLK) { |
| SiS_Pr->SiS_RY1COE = 0x00; |
| SiS_Pr->SiS_RY2COE = 0xf4; |
| SiS_Pr->SiS_RY3COE = 0x10; |
| SiS_Pr->SiS_RY4COE = 0x38; |
| } |
| |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { |
| SiS_Pr->SiS_HT = NTSCHT; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) SiS_Pr->SiS_HT = NTSC2HT; |
| SiS_Pr->SiS_VT = NTSCVT; |
| } else { |
| SiS_Pr->SiS_HT = PALHT; |
| SiS_Pr->SiS_VT = PALVT; |
| } |
| |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| |
| SiS_Pr->SiS_RVBHCMAX = 1; |
| SiS_Pr->SiS_RVBHCFACT = 1; |
| |
| if(SiS_Pr->UseCustomMode) { |
| |
| SiS_Pr->SiS_VGAHT = SiS_Pr->CHTotal; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->CVTotal; |
| SiS_Pr->SiS_HT = SiS_Pr->CHTotal; |
| SiS_Pr->SiS_VT = SiS_Pr->CVTotal; |
| SiS_Pr->SiS_HDE = SiS_Pr->SiS_VGAHDE; |
| SiS_Pr->SiS_VDE = SiS_Pr->SiS_VGAVDE; |
| |
| } else { |
| |
| BOOLEAN gotit = FALSE; |
| |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| |
| SiS_Pr->SiS_VGAHT = SiS_Pr->PanelHT; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->PanelVT; |
| SiS_Pr->SiS_HT = SiS_Pr->PanelHT; |
| SiS_Pr->SiS_VT = SiS_Pr->PanelVT; |
| gotit = TRUE; |
| |
| } else if( (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) && (romptr) && (ROMAddr) ) { |
| |
| #ifdef SIS315H |
| SiS_Pr->SiS_RVBHCMAX = ROMAddr[romptr]; |
| SiS_Pr->SiS_RVBHCFACT = ROMAddr[romptr+1]; |
| SiS_Pr->SiS_VGAHT = ROMAddr[romptr+2] | ((ROMAddr[romptr+3] & 0x0f) << 8); |
| SiS_Pr->SiS_VGAVT = ROMAddr[romptr+4] | ((ROMAddr[romptr+3] & 0xf0) << 4); |
| SiS_Pr->SiS_HT = ROMAddr[romptr+5] | ((ROMAddr[romptr+6] & 0x0f) << 8); |
| SiS_Pr->SiS_VT = ROMAddr[romptr+7] | ((ROMAddr[romptr+6] & 0xf0) << 4); |
| if(SiS_Pr->SiS_VGAHT) gotit = TRUE; |
| else { |
| SiS_Pr->SiS_LCDInfo |= DontExpandLCD; |
| SiS_Pr->SiS_LCDInfo &= ~LCDPass11; |
| SiS_Pr->SiS_VGAHT = SiS_Pr->PanelHT; |
| SiS_Pr->SiS_VGAVT = SiS_Pr->PanelVT; |
| SiS_Pr->SiS_HT = SiS_Pr->PanelHT; |
| SiS_Pr->SiS_VT = SiS_Pr->PanelVT; |
| gotit = TRUE; |
| } |
| #endif |
| |
| } |
| |
| if(!gotit) { |
| |
| SiS_GetCRT2Ptr(SiS_Pr,ModeNo,ModeIdIndex,RefreshRateTableIndex, |
| &CRT2Index,&ResIndex,HwInfo); |
| |
| switch(CRT2Index) { |
| case Panel_1024x768 : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data; break; |
| case Panel_1024x768 + 32: LCDPtr = SiS_Pr->SiS_St2LCD1024x768Data; break; |
| case Panel_1280x720 : |
| case Panel_1280x720 + 32: LCDPtr = SiS_Pr->SiS_LCD1280x720Data; break; |
| case Panel_1280x768_2 : LCDPtr = SiS_Pr->SiS_ExtLCD1280x768_2Data; break; |
| case Panel_1280x768_2+ 32: LCDPtr = SiS_Pr->SiS_StLCD1280x768_2Data; break; |
| case Panel_1280x800 : |
| case Panel_1280x800 + 32: LCDPtr = SiS_Pr->SiS_LCD1280x800Data; break; |
| case Panel_1280x800_2 : |
| case Panel_1280x800_2+ 32: LCDPtr = SiS_Pr->SiS_LCD1280x800_2Data; break; |
| case Panel_1280x960 : |
| case Panel_1280x960 + 32: LCDPtr = SiS_Pr->SiS_LCD1280x960Data; break; |
| case Panel_1280x1024 : LCDPtr = SiS_Pr->SiS_ExtLCD1280x1024Data; break; |
| case Panel_1280x1024 + 32: LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data; break; |
| case Panel_1400x1050 : LCDPtr = SiS_Pr->SiS_ExtLCD1400x1050Data; break; |
| case Panel_1400x1050 + 32: LCDPtr = SiS_Pr->SiS_StLCD1400x1050Data; break; |
| case Panel_1600x1200 : LCDPtr = SiS_Pr->SiS_ExtLCD1600x1200Data; break; |
| case Panel_1600x1200 + 32: LCDPtr = SiS_Pr->SiS_StLCD1600x1200Data; break; |
| case Panel_1680x1050 : |
| case Panel_1680x1050 + 32: LCDPtr = SiS_Pr->SiS_LCD1680x1050Data; break; |
| case 100 : LCDPtr = SiS_Pr->SiS_NoScaleData; break; |
| #ifdef SIS315H |
| case 200 : LCDPtr = SiS310_ExtCompaq1280x1024Data; break; |
| case 201 : LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data; break; |
| #endif |
| default : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data; break; |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex); |
| #endif |
| |
| SiS_Pr->SiS_RVBHCMAX = (LCDPtr+ResIndex)->RVBHCMAX; |
| SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT; |
| SiS_Pr->SiS_VGAHT = (LCDPtr+ResIndex)->VGAHT; |
| SiS_Pr->SiS_VGAVT = (LCDPtr+ResIndex)->VGAVT; |
| SiS_Pr->SiS_HT = (LCDPtr+ResIndex)->LCDHT; |
| SiS_Pr->SiS_VT = (LCDPtr+ResIndex)->LCDVT; |
| |
| } |
| |
| tempax = SiS_Pr->PanelXRes; |
| tempbx = SiS_Pr->PanelYRes; |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) { |
| if(HwInfo->jChipType < SIS_315H) { |
| if (SiS_Pr->SiS_VGAVDE == 350) tempbx = 560; |
| else if(SiS_Pr->SiS_VGAVDE == 400) tempbx = 640; |
| } |
| } else { |
| if (SiS_Pr->SiS_VGAVDE == 357) tempbx = 527; |
| else if(SiS_Pr->SiS_VGAVDE == 420) tempbx = 620; |
| else if(SiS_Pr->SiS_VGAVDE == 525) tempbx = 775; |
| else if(SiS_Pr->SiS_VGAVDE == 600) tempbx = 775; |
| else if(SiS_Pr->SiS_VGAVDE == 350) tempbx = 560; |
| else if(SiS_Pr->SiS_VGAVDE == 400) tempbx = 640; |
| } |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_1280x960) { |
| if (SiS_Pr->SiS_VGAVDE == 350) tempbx = 700; |
| else if(SiS_Pr->SiS_VGAVDE == 400) tempbx = 800; |
| else if(SiS_Pr->SiS_VGAVDE == 1024) tempbx = 960; |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| if (SiS_Pr->SiS_VGAVDE == 360) tempbx = 768; |
| else if(SiS_Pr->SiS_VGAVDE == 375) tempbx = 800; |
| else if(SiS_Pr->SiS_VGAVDE == 405) tempbx = 864; |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) { |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) { |
| if (SiS_Pr->SiS_VGAVDE == 350) tempbx = 875; |
| else if(SiS_Pr->SiS_VGAVDE == 400) tempbx = 1000; |
| } |
| } |
| |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| tempax = SiS_Pr->SiS_VGAHDE; |
| tempbx = SiS_Pr->SiS_VGAVDE; |
| } |
| |
| SiS_Pr->SiS_HDE = tempax; |
| SiS_Pr->SiS_VDE = tempbx; |
| } |
| } |
| } |
| |
| static void |
| SiS_GetCRT2Data(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| SiS_GetCRT2DataLVDS(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| } else { |
| if((SiS_Pr->SiS_VBType & VB_NoLCD) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) { |
| /* Need LVDS Data for LCD on 301B-DH */ |
| SiS_GetCRT2DataLVDS(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| } else { |
| SiS_GetCRT2Data301(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| } |
| } |
| |
| } else { |
| |
| SiS_GetCRT2DataLVDS(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| |
| } |
| } |
| |
| /*********************************************/ |
| /* GET LVDS DES (SKEW) DATA */ |
| /*********************************************/ |
| |
| static void |
| SiS_GetLVDSDesPtr(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, USHORT *PanelIndex, |
| USHORT *ResIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT modeflag; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| (*ResIndex) = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| (*ResIndex) = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| } |
| |
| (*ResIndex) &= 0x1F; |
| (*PanelIndex) = 0; |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| (*PanelIndex) = 50; |
| if((SiS_Pr->SiS_TVMode & TVSetPAL) && (!(SiS_Pr->SiS_TVMode & TVSetPALM))) (*PanelIndex) += 2; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) (*PanelIndex) += 1; |
| /* Nothing special needed for SOverscan */ |
| /* PALM uses NTSC data, PALN uses PAL data */ |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| *PanelIndex = SiS_Pr->SiS_LCDTypeInfo; |
| if(HwInfo->jChipType >= SIS_661) { |
| /* As long as we don's use the BIOS tables, we |
| * need to convert the TypeInfo as for 315 series |
| */ |
| (*PanelIndex) = SiS_Pr->SiS_LCDResInfo - 1; |
| } |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| (*PanelIndex) += 16; |
| if(SiS_Pr->SiS_LCDInfo & LCDPass11) { |
| (*PanelIndex) = 32; |
| if(modeflag & HalfDCLK) (*PanelIndex)++; |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_SetFlag & SetDOSMode) { |
| if(SiS_Pr->SiS_LCDResInfo != Panel_640x480) { |
| (*ResIndex) = 7; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_GetReg(SiS_Pr->SiS_P3c4,0x13) & 0x80) (*ResIndex)++; |
| } |
| } |
| } |
| } |
| |
| static void |
| SiS_GetLVDSDesData(SiS_Private *SiS_Pr, USHORT ModeNo,USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT modeflag; |
| USHORT PanelIndex,ResIndex; |
| const SiS_LVDSDesStruct *PanelDesPtr = NULL; |
| |
| SiS_Pr->SiS_LCDHDES = 0; |
| SiS_Pr->SiS_LCDVDES = 0; |
| |
| if( (SiS_Pr->UseCustomMode) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_Custom) || |
| (SiS_Pr->SiS_CustomT == CUT_PANEL848) || |
| ((SiS_Pr->SiS_VBType & VB_SISVB) && |
| (SiS_Pr->SiS_LCDInfo & DontExpandLCD) && |
| (SiS_Pr->SiS_LCDInfo & LCDPass11)) ) { |
| return; |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| |
| #ifdef SIS315H |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| /* non-pass 1:1 only, see above */ |
| if(SiS_Pr->SiS_VGAHDE != SiS_Pr->PanelXRes) { |
| SiS_Pr->SiS_LCDHDES = SiS_Pr->SiS_HT - ((SiS_Pr->PanelXRes - SiS_Pr->SiS_VGAHDE) / 2); |
| } |
| if(SiS_Pr->SiS_VGAVDE != SiS_Pr->PanelYRes) { |
| SiS_Pr->SiS_LCDVDES = SiS_Pr->SiS_VT - ((SiS_Pr->PanelYRes - SiS_Pr->SiS_VGAVDE) / 2); |
| } |
| } |
| if(SiS_Pr->SiS_VGAVDE == SiS_Pr->PanelYRes) { |
| switch(SiS_Pr->SiS_CustomT) { |
| case CUT_UNIWILL1024: |
| case CUT_UNIWILL10242: |
| case CUT_CLEVO1400: |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| SiS_Pr->SiS_LCDVDES = SiS_Pr->PanelVT - 1; |
| } |
| break; |
| } |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| if(SiS_Pr->SiS_CustomT != CUT_COMPAQ1280) { |
| SiS_Pr->SiS_LCDVDES = SiS_Pr->PanelVT - 1; |
| } |
| } |
| } |
| #endif |
| |
| } else { |
| |
| SiS_GetLVDSDesPtr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, |
| &PanelIndex, &ResIndex, HwInfo); |
| |
| switch(PanelIndex) { |
| case 0: PanelDesPtr = SiS_Pr->SiS_PanelType00_1; break; /* --- */ |
| case 1: PanelDesPtr = SiS_Pr->SiS_PanelType01_1; break; |
| case 2: PanelDesPtr = SiS_Pr->SiS_PanelType02_1; break; |
| case 3: PanelDesPtr = SiS_Pr->SiS_PanelType03_1; break; |
| case 4: PanelDesPtr = SiS_Pr->SiS_PanelType04_1; break; |
| case 5: PanelDesPtr = SiS_Pr->SiS_PanelType05_1; break; |
| case 6: PanelDesPtr = SiS_Pr->SiS_PanelType06_1; break; |
| case 7: PanelDesPtr = SiS_Pr->SiS_PanelType07_1; break; |
| case 8: PanelDesPtr = SiS_Pr->SiS_PanelType08_1; break; |
| case 9: PanelDesPtr = SiS_Pr->SiS_PanelType09_1; break; |
| case 10: PanelDesPtr = SiS_Pr->SiS_PanelType0a_1; break; |
| case 11: PanelDesPtr = SiS_Pr->SiS_PanelType0b_1; break; |
| case 12: PanelDesPtr = SiS_Pr->SiS_PanelType0c_1; break; |
| case 13: PanelDesPtr = SiS_Pr->SiS_PanelType0d_1; break; |
| case 14: PanelDesPtr = SiS_Pr->SiS_PanelType0e_1; break; |
| case 15: PanelDesPtr = SiS_Pr->SiS_PanelType0f_1; break; |
| case 16: PanelDesPtr = SiS_Pr->SiS_PanelType00_2; break; /* --- */ |
| case 17: PanelDesPtr = SiS_Pr->SiS_PanelType01_2; break; |
| case 18: PanelDesPtr = SiS_Pr->SiS_PanelType02_2; break; |
| case 19: PanelDesPtr = SiS_Pr->SiS_PanelType03_2; break; |
| case 20: PanelDesPtr = SiS_Pr->SiS_PanelType04_2; break; |
| case 21: PanelDesPtr = SiS_Pr->SiS_PanelType05_2; break; |
| case 22: PanelDesPtr = SiS_Pr->SiS_PanelType06_2; break; |
| case 23: PanelDesPtr = SiS_Pr->SiS_PanelType07_2; break; |
| case 24: PanelDesPtr = SiS_Pr->SiS_PanelType08_2; break; |
| case 25: PanelDesPtr = SiS_Pr->SiS_PanelType09_2; break; |
| case 26: PanelDesPtr = SiS_Pr->SiS_PanelType0a_2; break; |
| case 27: PanelDesPtr = SiS_Pr->SiS_PanelType0b_2; break; |
| case 28: PanelDesPtr = SiS_Pr->SiS_PanelType0c_2; break; |
| case 29: PanelDesPtr = SiS_Pr->SiS_PanelType0d_2; break; |
| case 30: PanelDesPtr = SiS_Pr->SiS_PanelType0e_2; break; |
| case 31: PanelDesPtr = SiS_Pr->SiS_PanelType0f_2; break; |
| case 32: PanelDesPtr = SiS_Pr->SiS_PanelTypeNS_1; break; /* pass 1:1 */ |
| case 33: PanelDesPtr = SiS_Pr->SiS_PanelTypeNS_2; break; |
| case 50: PanelDesPtr = SiS_Pr->SiS_CHTVUNTSCDesData; break; /* TV */ |
| case 51: PanelDesPtr = SiS_Pr->SiS_CHTVONTSCDesData; break; |
| case 52: PanelDesPtr = SiS_Pr->SiS_CHTVUPALDesData; break; |
| case 53: PanelDesPtr = SiS_Pr->SiS_CHTVOPALDesData; break; |
| default: return; |
| } |
| |
| SiS_Pr->SiS_LCDHDES = (PanelDesPtr+ResIndex)->LCDHDES; |
| SiS_Pr->SiS_LCDVDES = (PanelDesPtr+ResIndex)->LCDVDES; |
| |
| if((ModeNo <= 0x13) && (SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| if((SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 632; |
| } else if(!(SiS_Pr->SiS_SetFlag & SetDOSMode)) { |
| if(SiS_Pr->SiS_LCDResInfo != Panel_1280x1024) { |
| if(SiS_Pr->SiS_LCDResInfo >= Panel_1024x768) { |
| if(HwInfo->jChipType < SIS_315H) { |
| if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 320; |
| } else { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) SiS_Pr->SiS_LCDHDES = 480; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 804; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 704; |
| if(!(modeflag & HalfDCLK)) { |
| SiS_Pr->SiS_LCDHDES = 320; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 632; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 542; |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| /*********************************************/ |
| /* DISABLE VIDEO BRIDGE */ |
| /*********************************************/ |
| |
| /* NEVER use any variables (VBInfo), this will be called |
| * from outside the context of modeswitch! |
| * MUST call getVBType before calling this |
| */ |
| void |
| SiS_DisableBridge(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| #ifdef SIS315H |
| USHORT tempah,pushax=0,modenum; |
| #endif |
| USHORT temp=0; |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { /* ===== For 30xB/LV ===== */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* 300 series */ |
| |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFE); |
| } else { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x08); |
| } |
| SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| if(SiS_Is301B(SiS_Pr)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x1f,0x3f); |
| SiS_ShortDelay(SiS_Pr,1); |
| } |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x00,0xDF); |
| SiS_DisplayOff(SiS_Pr); |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x32,0xDF); |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); |
| SiS_UnLockCRT2(SiS_Pr,HwInfo); |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301LV302LV)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x01,0x80); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x02,0x40); |
| } |
| if( (!(SiS_CRT2IsLCD(SiS_Pr, HwInfo))) || |
| (!(SiS_CR36BIOSWord23d(SiS_Pr, HwInfo))) ) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFD); |
| } else { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x04); |
| } |
| } |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* 315 series */ |
| |
| BOOLEAN custom1 = ((SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) || |
| (SiS_Pr->SiS_CustomT == CUT_CLEVO1400)) ? TRUE : FALSE; |
| |
| modenum = SiS_GetReg(SiS_Pr->SiS_P3d4,0x34) & 0x7f; |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| |
| #ifdef SET_EMI |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| if(SiS_Pr->SiS_CustomT != CUT_CLEVO1400) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x30,0x0c); |
| } |
| } |
| #endif |
| if( (modenum <= 0x13) || |
| (SiS_IsVAMode(SiS_Pr,HwInfo)) || |
| (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) ) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFE); |
| if(custom1) SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| |
| if(!custom1) { |
| SiS_DDC2Delay(SiS_Pr,0xff00); |
| SiS_DDC2Delay(SiS_Pr,0xe000); |
| SiS_SetRegByte(SiS_Pr->SiS_P3c6,0x00); |
| pushax = SiS_GetReg(SiS_Pr->SiS_P3c4,0x06); |
| if(IS_SIS740) { |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x06,0xE3); |
| } |
| SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| |
| } |
| |
| if(!(SiS_IsNotM650orLater(SiS_Pr, HwInfo))) { |
| if(HwInfo->jChipType < SIS_340) { |
| tempah = 0xef; |
| if(SiS_IsVAMode(SiS_Pr,HwInfo)) tempah = 0xf7; |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x4c,tempah); |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x1F,~0x10); |
| } |
| |
| tempah = 0x3f; |
| if(SiS_IsDualEdge(SiS_Pr,HwInfo)) { |
| tempah = 0x7f; |
| if(!(SiS_IsVAMode(SiS_Pr,HwInfo))) tempah = 0xbf; |
| } |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x1F,tempah); |
| |
| if((SiS_IsVAMode(SiS_Pr,HwInfo)) || |
| ((SiS_Pr->SiS_VBType & VB_SIS301LV302LV) && (modenum <= 0x13))) { |
| |
| SiS_DisplayOff(SiS_Pr); |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| } |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x32,0xDF); |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x1E,0xDF); |
| |
| } |
| |
| if((!(SiS_IsVAMode(SiS_Pr,HwInfo))) || |
| ((SiS_Pr->SiS_VBType & VB_SIS301LV302LV) && (modenum <= 0x13))) { |
| |
| if(!(SiS_IsDualEdge(SiS_Pr,HwInfo))) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x00,0xdf); |
| SiS_DisplayOff(SiS_Pr); |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x00,0x80); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| } |
| |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x32,0xDF); |
| temp = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x00,0x10); |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp); |
| |
| } |
| |
| if(SiS_IsNotM650orLater(SiS_Pr,HwInfo)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2e,0x7f); |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| |
| if(!custom1) { |
| |
| if(!(SiS_IsVAMode(SiS_Pr,HwInfo))) { |
| if(!(SiS_CRT2IsLCD(SiS_Pr,HwInfo))) { |
| if(!(SiS_IsDualEdge(SiS_Pr,HwInfo))) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFD); |
| } |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x06,pushax); |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| if(SiS_IsVAorLCD(SiS_Pr, HwInfo)) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 20); |
| } |
| } |
| |
| } else { |
| |
| if((SiS_IsVAMode(SiS_Pr,HwInfo)) || |
| (!(SiS_IsDualEdge(SiS_Pr,HwInfo)))) { |
| if((!(SiS_WeHaveBacklightCtrl(SiS_Pr, HwInfo))) || |
| (!(SiS_CRT2IsLCD(SiS_Pr, HwInfo)))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFD); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 4); |
| } |
| } |
| |
| } |
| } |
| |
| #endif /* SIS315H */ |
| |
| } |
| |
| } else { /* ============ For 301 ================ */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| #ifdef SIS300 |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x08); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| #endif |
| } |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x00,0xDF); /* disable VB */ |
| SiS_DisplayOff(SiS_Pr); |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x00,0x80); |
| } |
| |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x32,0xDF); /* disable lock mode */ |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| temp = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x00,0x10); |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp); |
| } else { |
| #ifdef SIS300 |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); /* disable CRT2 */ |
| if( (!(SiS_CRT2IsLCD(SiS_Pr, HwInfo))) || |
| (!(SiS_CR36BIOSWord23d(SiS_Pr,HwInfo))) ) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x04); |
| } |
| #endif |
| } |
| |
| } |
| |
| } else { /* ============ For LVDS =============*/ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* 300 series */ |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { |
| SiS_SetCH700x(SiS_Pr,0x090E); |
| } |
| |
| if(HwInfo->jChipType == SIS_730) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x11) & 0x08)) { |
| SiS_WaitVBRetrace(SiS_Pr,HwInfo); |
| } |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x08); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| } else { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x11) & 0x08)) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x13) & 0x40)) { |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| SiS_WaitVBRetrace(SiS_Pr,HwInfo); |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x06) & 0x1c)) { |
| SiS_DisplayOff(SiS_Pr); |
| } |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x08); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| } |
| } |
| } |
| |
| SiS_DisplayOff(SiS_Pr); |
| |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x32,0xDF); |
| |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); |
| SiS_UnLockCRT2(SiS_Pr,HwInfo); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x01,0x80); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x02,0x40); |
| |
| if( (!(SiS_CRT2IsLCD(SiS_Pr, HwInfo))) || |
| (!(SiS_CR36BIOSWord23d(SiS_Pr,HwInfo))) ) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x04); |
| } |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* 315 series */ |
| |
| if(!(SiS_IsNotM650orLater(SiS_Pr,HwInfo))) { |
| if(HwInfo->jChipType < SIS_340) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x4c,~0x18); |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| |
| if(HwInfo->jChipType == SIS_740) { |
| temp = SiS_GetCH701x(SiS_Pr,0x61); |
| if(temp < 1) { |
| SiS_SetCH701x(SiS_Pr,0xac76); |
| SiS_SetCH701x(SiS_Pr,0x0066); |
| } |
| |
| if( (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (SiS_IsTVOrYPbPrOrScart(SiS_Pr,HwInfo)) ) { |
| SiS_SetCH701x(SiS_Pr,0x3e49); |
| } |
| } |
| |
| if( (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (SiS_IsVAMode(SiS_Pr,HwInfo)) ) { |
| SiS_Chrontel701xBLOff(SiS_Pr); |
| SiS_Chrontel701xOff(SiS_Pr,HwInfo); |
| } |
| |
| if(HwInfo->jChipType != SIS_740) { |
| if( (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (SiS_IsTVOrYPbPrOrScart(SiS_Pr,HwInfo)) ) { |
| SiS_SetCH701x(SiS_Pr,0x0149); |
| } |
| } |
| |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x08); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 3); |
| } |
| |
| if( (SiS_Pr->SiS_IF_DEF_CH70xx == 0) || |
| (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (!(SiS_IsTVOrYPbPrOrScart(SiS_Pr,HwInfo))) ) { |
| SiS_DisplayOff(SiS_Pr); |
| } |
| |
| if( (SiS_Pr->SiS_IF_DEF_CH70xx == 0) || |
| (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (!(SiS_IsVAMode(SiS_Pr,HwInfo))) ) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x00,0x80); |
| } |
| |
| if(HwInfo->jChipType == SIS_740) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2e,0x7f); |
| } |
| |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x32,0xDF); |
| |
| if( (SiS_Pr->SiS_IF_DEF_CH70xx == 0) || |
| (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (!(SiS_IsVAMode(SiS_Pr,HwInfo))) ) { |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x1e,0xdf); |
| if(HwInfo->jChipType == SIS_550) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x1e,0xbf); |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x1e,0xef); |
| } |
| } |
| } else { |
| if(HwInfo->jChipType == SIS_740) { |
| if(SiS_IsLCDOrLCDA(SiS_Pr,HwInfo)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x1e,0xdf); |
| } |
| } else if(SiS_IsVAMode(SiS_Pr,HwInfo)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x1e,0xdf); |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_IsDualEdge(SiS_Pr,HwInfo)) { |
| /* SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xff); */ |
| } else { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb); |
| } |
| } |
| |
| SiS_UnLockCRT2(SiS_Pr,HwInfo); |
| |
| if(HwInfo->jChipType == SIS_550) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x01,0x80); /* DirectDVD PAL?*/ |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x02,0x40); /* VB clock / 4 ? */ |
| } else if( (SiS_Pr->SiS_IF_DEF_CH70xx == 0) || |
| (!(SiS_IsDualEdge(SiS_Pr,HwInfo))) || |
| (!(SiS_IsVAMode(SiS_Pr,HwInfo))) ) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2e,0xf7); |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| if(!(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x04); |
| } |
| } |
| } |
| |
| #endif /* SIS315H */ |
| |
| } /* 315 series */ |
| |
| } /* LVDS */ |
| |
| } |
| |
| /*********************************************/ |
| /* ENABLE VIDEO BRIDGE */ |
| /*********************************************/ |
| |
| /* NEVER use any variables (VBInfo), this will be called |
| * from outside the context of a mode switch! |
| * MUST call getVBType before calling this |
| */ |
| void |
| SiS_EnableBridge(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp=0,tempah; |
| #ifdef SIS315H |
| USHORT temp1,pushax=0; |
| BOOLEAN delaylong = FALSE; |
| #endif |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { /* ====== For 301B et al ====== */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* 300 series */ |
| |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x26,0x02); |
| } else if(SiS_Pr->SiS_VBType & VB_NoLCD) { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x00); |
| } |
| if(SiS_Pr->SiS_VBType & (VB_SIS301LV302LV | VB_NoLCD)) { |
| if(!(SiS_CR36BIOSWord23d(SiS_Pr, HwInfo))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 0); |
| } |
| } |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_NoLCD) && |
| (SiS_CRT2IsLCD(SiS_Pr, HwInfo))) { |
| |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); /* Enable CRT2 */ |
| SiS_DisplayOn(SiS_Pr); |
| SiS_UnLockCRT2(SiS_Pr,HwInfo); |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x02,0xBF); |
| if(SiS_BridgeInSlavemode(SiS_Pr)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x01,0x1F); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x01,0x1F,0x40); |
| } |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x13) & 0x40)) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x16) & 0x10)) { |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| } |
| SiS_WaitVBRetrace(SiS_Pr,HwInfo); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x00); |
| } |
| } |
| |
| } else { |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x32) & 0xDF; /* lock mode */ |
| if(SiS_BridgeInSlavemode(SiS_Pr)) { |
| tempah = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(!(tempah & SetCRT2ToRAMDAC)) temp |= 0x20; |
| } |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x32,temp); |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x00,0x1F,0x20); /* enable VB processor */ |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x1F,0xC0); |
| SiS_DisplayOn(SiS_Pr); |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x16) & 0x10)) { |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x26,0x01); |
| } |
| } |
| } |
| |
| } |
| |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* 315 series */ |
| |
| #ifdef SET_EMI |
| UCHAR r30=0, r31=0, r32=0, r33=0, cr36=0; |
| /* USHORT emidelay=0; */ |
| #endif |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x1f,0xef); |
| #ifdef SET_EMI |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x30,0x0c); |
| } |
| #endif |
| } |
| |
| if(!(SiS_IsNotM650orLater(SiS_Pr, HwInfo))) { |
| if(HwInfo->jChipType < SIS_340) { |
| tempah = 0x10; |
| if(SiS_LCDAEnabled(SiS_Pr, HwInfo)) { |
| if(SiS_TVEnabled(SiS_Pr, HwInfo)) tempah = 0x18; |
| else tempah = 0x08; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x4c,tempah); |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| |
| SiS_SetRegByte(SiS_Pr->SiS_P3c6,0x00); |
| SiS_DisplayOff(SiS_Pr); |
| pushax = SiS_GetReg(SiS_Pr->SiS_P3c4,0x06); |
| if(IS_SIS740) { |
| SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x06,0xE3); |
| } |
| |
| if(SiS_IsVAorLCD(SiS_Pr, HwInfo)) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_Part4Port,0x26) & 0x02)) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 2); |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x26,0x02); |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 2); |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_GenericDelay(SiS_Pr, 0x4500); |
| } |
| } |
| } |
| |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & 0x40)) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 10); |
| delaylong = TRUE; |
| } |
| |
| } |
| |
| if(!(SiS_IsVAMode(SiS_Pr,HwInfo))) { |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x32) & 0xDF; |
| if(SiS_BridgeInSlavemode(SiS_Pr)) { |
| tempah = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(!(tempah & SetCRT2ToRAMDAC)) { |
| if(!(SiS_LCDAEnabled(SiS_Pr, HwInfo))) temp |= 0x20; |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x32,temp); |
| |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); /* enable CRT2 */ |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2e,0x7f); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2e,0x80); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| } |
| |
| } else { |
| |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1e,0x20); |
| |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x00,0x1f,0x20); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2e,0x80); |
| |
| tempah = 0xc0; |
| if(SiS_IsDualEdge(SiS_Pr, HwInfo)) { |
| tempah = 0x80; |
| if(!(SiS_IsVAMode(SiS_Pr, HwInfo))) tempah = 0x40; |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x1F,tempah); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| |
| SiS_PanelDelay(SiS_Pr, HwInfo, 2); |
| |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x1f,0x10); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2e,0x80); |
| |
| if(SiS_Pr->SiS_CustomT != CUT_CLEVO1400) { |
| #ifdef SET_EMI |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x30,0x0c); |
| SiS_GenericDelay(SiS_Pr, 0x500); |
| } |
| #endif |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x27,0x0c); |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| #ifdef SET_EMI |
| cr36 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36); |
| |
| if(SiS_Pr->SiS_ROMNew) { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT romptr = GetLCDStructPtr661_2(SiS_Pr, HwInfo); |
| if(romptr) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x30,0x20); /* Reset */ |
| SiS_Pr->EMI_30 = 0; |
| SiS_Pr->EMI_31 = ROMAddr[romptr + SiS_Pr->SiS_EMIOffset + 0]; |
| SiS_Pr->EMI_32 = ROMAddr[romptr + SiS_Pr->SiS_EMIOffset + 1]; |
| SiS_Pr->EMI_33 = ROMAddr[romptr + SiS_Pr->SiS_EMIOffset + 2]; |
| if(ROMAddr[romptr + 1] & 0x10) SiS_Pr->EMI_30 = 0x40; |
| /* emidelay = SISGETROMW((romptr + 0x22)); */ |
| SiS_Pr->HaveEMI = SiS_Pr->HaveEMILCD = SiS_Pr->OverruleEMI = TRUE; |
| } |
| } |
| |
| /* (P4_30|0x40) */ |
| /* Compal 1400x1050: 0x05, 0x60, 0x00 YES (1.10.7w; CR36=69) */ |
| /* Compal 1400x1050: 0x0d, 0x70, 0x40 YES (1.10.7x; CR36=69) */ |
| /* Acer 1280x1024: 0x12, 0xd0, 0x6b NO (1.10.9k; CR36=73) */ |
| /* Compaq 1280x1024: 0x0d, 0x70, 0x6b YES (1.12.04b; CR36=03) */ |
| /* Clevo 1024x768: 0x05, 0x60, 0x33 NO (1.10.8e; CR36=12, DL!) */ |
| /* Clevo 1024x768: 0x0d, 0x70, 0x40 (if type == 3) YES (1.10.8y; CR36=?2) */ |
| /* Clevo 1024x768: 0x05, 0x60, 0x33 (if type != 3) YES (1.10.8y; CR36=?2) */ |
| /* Asus 1024x768: ? ? (1.10.8o; CR36=?2) */ |
| /* Asus 1024x768: 0x08, 0x10, 0x3c (problematic) YES (1.10.8q; CR36=22) */ |
| |
| if(SiS_Pr->HaveEMI) { |
| r30 = SiS_Pr->EMI_30; r31 = SiS_Pr->EMI_31; |
| r32 = SiS_Pr->EMI_32; r33 = SiS_Pr->EMI_33; |
| } else { |
| r30 = 0; |
| } |
| |
| /* EMI_30 is read at driver start; however, the BIOS sets this |
| * (if it is used) only if the LCD is in use. In case we caught |
| * the machine while on TV output, this bit is not set and we |
| * don't know if it should be set - hence our detection is wrong. |
| * Work-around this here: |
| */ |
| |
| if((!SiS_Pr->HaveEMI) || (!SiS_Pr->HaveEMILCD)) { |
| switch((cr36 & 0x0f)) { |
| case 2: |
| r30 |= 0x40; |
| if(SiS_Pr->SiS_CustomT == CUT_CLEVO1024) r30 &= ~0x40; |
| if(!SiS_Pr->HaveEMI) { |
| r31 = 0x05; r32 = 0x60; r33 = 0x33; |
| if((cr36 & 0xf0) == 0x30) { |
| r31 = 0x0d; r32 = 0x70; r33 = 0x40; |
| } |
| } |
| break; |
| case 3: /* 1280x1024 */ |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) r30 |= 0x40; |
| if(!SiS_Pr->HaveEMI) { |
| r31 = 0x12; r32 = 0xd0; r33 = 0x6b; |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) { |
| r31 = 0x0d; r32 = 0x70; r33 = 0x6b; |
| } |
| } |
| break; |
| case 9: /* 1400x1050 */ |
| r30 |= 0x40; |
| if(!SiS_Pr->HaveEMI) { |
| r31 = 0x05; r32 = 0x60; r33 = 0x00; |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAL1400_2) { |
| r31 = 0x0d; r32 = 0x70; r33 = 0x40; /* BIOS values */ |
| } |
| } |
| break; |
| case 11: /* 1600x1200 - unknown */ |
| r30 |= 0x40; |
| if(!SiS_Pr->HaveEMI) { |
| r31 = 0x05; r32 = 0x60; r33 = 0x00; |
| } |
| } |
| } |
| |
| /* BIOS values don't work so well sometimes */ |
| if(!SiS_Pr->OverruleEMI) { |
| #ifdef COMPAL_HACK |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAL1400_2) { |
| if((cr36 & 0x0f) == 0x09) { |
| r30 = 0x60; r31 = 0x05; r32 = 0x60; r33 = 0x00; |
| } |
| } |
| #endif |
| #ifdef COMPAQ_HACK |
| if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) { |
| if((cr36 & 0x0f) == 0x03) { |
| r30 = 0x20; r31 = 0x12; r32 = 0xd0; r33 = 0x6b; |
| } |
| } |
| #endif |
| #ifdef ASUS_HACK |
| if(SiS_Pr->SiS_CustomT == CUT_ASUSA2H_2) { |
| if((cr36 & 0x0f) == 0x02) { |
| /* r30 = 0x60; r31 = 0x05; r32 = 0x60; r33 = 0x33; */ /* rev 2 */ |
| /* r30 = 0x20; r31 = 0x05; r32 = 0x60; r33 = 0x33; */ /* rev 3 */ |
| /* r30 = 0x60; r31 = 0x0d; r32 = 0x70; r33 = 0x40; */ /* rev 4 */ |
| /* r30 = 0x20; r31 = 0x0d; r32 = 0x70; r33 = 0x40; */ /* rev 5 */ |
| } |
| } |
| #endif |
| } |
| |
| if(!(SiS_Pr->OverruleEMI && (!r30) && (!r31) && (!r32) && (!r33))) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x30,0x20); /* Reset */ |
| SiS_GenericDelay(SiS_Pr, 0x500); |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x31,r31); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x32,r32); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x33,r33); |
| #endif /* SET_EMI */ |
| |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x34,0x10); |
| |
| #ifdef SET_EMI |
| if( (SiS_LCDAEnabled(SiS_Pr, HwInfo)) || |
| (SiS_CRT2IsLCD(SiS_Pr, HwInfo)) ) { |
| if(r30 & 0x40) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 5); |
| if(delaylong) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 5); |
| delaylong = FALSE; |
| } |
| SiS_WaitVBRetrace(SiS_Pr,HwInfo); |
| if(SiS_Pr->SiS_CustomT == CUT_ASUSA2H_2) { |
| SiS_GenericDelay(SiS_Pr, 0x500); |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x30,0x40); /* Enable */ |
| } |
| } |
| #endif |
| } |
| } |
| |
| if(!(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo))) { |
| if(SiS_IsVAorLCD(SiS_Pr, HwInfo)) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 10); |
| if(delaylong) { |
| SiS_PanelDelayLoop(SiS_Pr, HwInfo, 3, 10); |
| } |
| SiS_WaitVBRetrace(SiS_Pr,HwInfo); |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_GenericDelay(SiS_Pr, 0x500); |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x26,0x01); |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x06,pushax); |
| SiS_DisplayOn(SiS_Pr); |
| SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xff); |
| |
| } |
| |
| if(!(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo))) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f); |
| } |
| |
| #endif /* SIS315H */ |
| |
| } |
| |
| } else { /* ============ For 301 ================ */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x00); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 0); |
| } |
| } |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x32) & 0xDF; /* lock mode */ |
| if(SiS_BridgeInSlavemode(SiS_Pr)) { |
| tempah = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); |
| if(!(tempah & SetCRT2ToRAMDAC)) temp |= 0x20; |
| } |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x32,temp); |
| |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); /* enable CRT2 */ |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| temp = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x2E); |
| if(!(temp & 0x80)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2E,0x80); /* BVBDOENABLE=1 */ |
| } |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x00,0x1F,0x20); /* enable VB processor */ |
| |
| SiS_VBLongWait(SiS_Pr); |
| SiS_DisplayOn(SiS_Pr); |
| if(HwInfo->jChipType >= SIS_315H) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f); |
| } |
| SiS_VBLongWait(SiS_Pr); |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x00); |
| } |
| } |
| |
| } |
| |
| } else { /* =================== For LVDS ================== */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* 300 series */ |
| |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| if(HwInfo->jChipType == SIS_730) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| } |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x00); |
| if(!(SiS_CR36BIOSWord23d(SiS_Pr,HwInfo))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 0); |
| } |
| } |
| |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); |
| SiS_DisplayOn(SiS_Pr); |
| SiS_UnLockCRT2(SiS_Pr,HwInfo); |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x02,0xBF); |
| if(SiS_BridgeInSlavemode(SiS_Pr)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x01,0x1F); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x01,0x1F,0x40); |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { |
| if(!(SiS_CRT2IsLCD(SiS_Pr, HwInfo))) { |
| SiS_WaitVBRetrace(SiS_Pr, HwInfo); |
| SiS_SetCH700x(SiS_Pr,0x0B0E); |
| } |
| } |
| |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x13) & 0x40)) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3c4,0x16) & 0x10)) { |
| if(!(SiS_CR36BIOSWord23b(SiS_Pr,HwInfo))) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| } |
| SiS_WaitVBRetrace(SiS_Pr, HwInfo); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x00); |
| } |
| } |
| } |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* 315 series */ |
| |
| if(!(SiS_IsNotM650orLater(SiS_Pr,HwInfo))) { |
| if(HwInfo->jChipType < SIS_340) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x4c,0x18); |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFB,0x00); |
| SiS_PanelDelay(SiS_Pr, HwInfo, 0); |
| } |
| } |
| |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); |
| SiS_UnLockCRT2(SiS_Pr,HwInfo); |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2e,0xf7); |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| temp &= 0x20; |
| SiS_Chrontel701xBLOff(SiS_Pr); |
| } |
| |
| if(HwInfo->jChipType != SIS_550) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2e,0x7f); |
| } |
| |
| if(HwInfo->jChipType == SIS_740) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(SiS_IsLCDOrLCDA(SiS_Pr, HwInfo)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1E,0x20); |
| } |
| } |
| } |
| |
| temp1 = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x2E); |
| if(!(temp1 & 0x80)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2E,0x80); |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(temp) { |
| SiS_Chrontel701xBLOn(SiS_Pr, HwInfo); |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1E,0x20); |
| if(HwInfo->jChipType == SIS_550) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1E,0x40); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1E,0x10); |
| } |
| } |
| } else if(SiS_IsVAMode(SiS_Pr,HwInfo)) { |
| if(HwInfo->jChipType != SIS_740) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1E,0x20); |
| } |
| } |
| |
| if(!(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo))) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f); |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(SiS_IsTVOrYPbPrOrScart(SiS_Pr,HwInfo)) { |
| SiS_Chrontel701xOn(SiS_Pr,HwInfo); |
| } |
| if( (SiS_IsVAMode(SiS_Pr,HwInfo)) || |
| (SiS_IsLCDOrLCDA(SiS_Pr,HwInfo)) ) { |
| SiS_ChrontelDoSomething1(SiS_Pr,HwInfo); |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(!(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo))) { |
| if( (SiS_IsVAMode(SiS_Pr,HwInfo)) || |
| (SiS_IsLCDOrLCDA(SiS_Pr,HwInfo)) ) { |
| SiS_Chrontel701xBLOn(SiS_Pr, HwInfo); |
| SiS_ChrontelInitTVVSync(SiS_Pr,HwInfo); |
| } |
| } |
| } else if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) { |
| if(!(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo))) { |
| if(SiS_CRT2IsLCD(SiS_Pr, HwInfo)) { |
| SiS_PanelDelay(SiS_Pr, HwInfo, 1); |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xF7,0x00); |
| } |
| } |
| } |
| |
| #endif /* SIS315H */ |
| |
| } /* 310 series */ |
| |
| } /* LVDS */ |
| |
| } |
| |
| /*********************************************/ |
| /* SET PART 1 REGISTER GROUP */ |
| /*********************************************/ |
| |
| /* Set CRT2 OFFSET / PITCH */ |
| static void |
| SiS_SetCRT2Offset(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RRTI, PSIS_HW_INFO HwInfo) |
| { |
| USHORT offset; |
| UCHAR temp; |
| |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) return; |
| |
| offset = SiS_GetOffset(SiS_Pr,ModeNo,ModeIdIndex,RRTI,HwInfo); |
| |
| if((SiS_Pr->SiS_LCDResInfo == Panel_640x480_2) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_640x480_3)) { |
| offset >>= 1; |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(offset & 0xFF)); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x09,(offset >> 8)); |
| temp = (UCHAR)(((offset >> 3) & 0xFF) + 1); |
| if(offset % 8) temp++; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x03,temp); |
| } |
| |
| /* Set CRT2 sync and PanelLink mode */ |
| static void |
| SiS_SetCRT2Sync(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT RefreshRateTableIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT tempah=0,tempbl,infoflag; |
| |
| tempbl = 0xC0; |
| |
| if(SiS_Pr->UseCustomMode) { |
| infoflag = SiS_Pr->CInfoFlag; |
| } else { |
| infoflag = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_InfoFlag; |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { /* LVDS */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| tempah = 0; |
| } else if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && (SiS_Pr->SiS_LCDInfo & LCDSync)) { |
| tempah = SiS_Pr->SiS_LCDInfo; |
| } else tempah = infoflag >> 8; |
| tempah &= 0xC0; |
| tempah |= 0x20; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit)) tempah |= 0x10; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if((SiS_Pr->SiS_CustomT == CUT_BARCO1366) || |
| (SiS_Pr->SiS_CustomT == CUT_BARCO1024)) { |
| tempah |= 0xf0; |
| } |
| if( (SiS_Pr->SiS_IF_DEF_FSTN) || |
| (SiS_Pr->SiS_IF_DEF_DSTN) || |
| (SiS_Pr->SiS_IF_DEF_TRUMPION) || |
| (SiS_Pr->SiS_CustomT == CUT_PANEL848) ) { |
| tempah |= 0x30; |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(HwInfo->jChipType >= SIS_315H) { |
| tempah >>= 3; |
| tempah &= 0x18; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,0xE7,tempah); |
| /* Don't care about 12/18/24 bit mode - TV is via VGA, not PL */ |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0F,0xe0); |
| } |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0F,tempah); |
| } |
| |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* ---- 300 series --- */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { /* 630 - 301B(-DH) */ |
| |
| tempah = infoflag >> 8; |
| tempbl = 0; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->SiS_LCDInfo & LCDSync) { |
| tempah = SiS_Pr->SiS_LCDInfo; |
| tempbl = (tempah >> 6) & 0x03; |
| } |
| } |
| tempah &= 0xC0; |
| tempah |= 0x20; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit)) tempah |= 0x10; |
| tempah |= 0xc0; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0F,tempah); |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && (!(SiS_Pr->SiS_VBType & VB_NoLCD))) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1a,0xf0,tempbl); |
| } |
| |
| } else { /* 630 - 301 */ |
| |
| tempah = infoflag >> 8; |
| tempah &= 0xC0; |
| tempah |= 0x20; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit)) tempah |= 0x10; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0F,tempah); |
| |
| } |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* ------- 315 series ------ */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { /* 315 - LVDS */ |
| |
| tempbl = 0; |
| if((SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) && |
| (SiS_Pr->SiS_LCDResInfo == Panel_1280x1024)) { |
| tempah = infoflag >> 8; |
| if(SiS_Pr->SiS_LCDInfo & LCDSync) { |
| tempbl = ((SiS_Pr->SiS_LCDInfo & 0xc0) >> 6); |
| } |
| } else if((SiS_Pr->SiS_CustomT == CUT_CLEVO1400) && |
| (SiS_Pr->SiS_LCDResInfo == Panel_1400x1050)) { |
| tempah = infoflag >> 8; |
| tempbl = 0x03; |
| } else { |
| tempah = SiS_GetReg(SiS_Pr->SiS_P3d4,0x37); |
| tempbl = (tempah >> 6) & 0x03; |
| tempbl |= 0x08; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit)) tempbl |= 0x04; |
| } |
| tempah &= 0xC0; |
| tempah |= 0x20; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit)) tempah |= 0x10; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) tempah |= 0xc0; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0F,tempah); |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1a,0xf0,tempbl); |
| } |
| } |
| |
| } else { /* 315 - TMDS */ |
| |
| tempah = tempbl = infoflag >> 8; |
| if(!SiS_Pr->UseCustomMode) { |
| tempbl = 0; |
| if((SiS_Pr->SiS_VBType & VB_SIS301C) && (SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC)) { |
| if(ModeNo <= 0x13) { |
| tempah = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02)); |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| if(SiS_Pr->SiS_LCDInfo & LCDSync) { |
| tempah = SiS_Pr->SiS_LCDInfo; |
| tempbl = (tempah >> 6) & 0x03; |
| } |
| } |
| } |
| } |
| tempah &= 0xC0; |
| tempah |= 0x20; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit)) tempah |= 0x10; |
| if(SiS_Pr->SiS_VBType & VB_NoLCD) { |
| /* Imitate BIOS bug */ |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) tempah |= 0xc0; |
| } |
| if((SiS_Pr->SiS_VBType & VB_SIS301C) && (SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC)) { |
| tempah >>= 3; |
| tempah &= 0x18; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,0xe7,tempah); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0F,tempah); |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1a,0xf0,tempbl); |
| } |
| } |
| } |
| |
| } |
| #endif /* SIS315H */ |
| } |
| } |
| } |
| |
| /* Set CRT2 FIFO on 300/630/730 */ |
| #ifdef SIS300 |
| static void |
| SiS_SetCRT2FIFO_300(SiS_Private *SiS_Pr,USHORT ModeNo, |
| PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT temp,index; |
| USHORT modeidindex,refreshratetableindex; |
| USHORT VCLK=0,MCLK,colorth=0,data2=0; |
| USHORT tempal, tempah, tempbx, tempcl, tempax; |
| USHORT CRT1ModeNo,CRT2ModeNo; |
| USHORT SelectRate_backup; |
| ULONG data,eax; |
| const UCHAR LatencyFactor[] = { |
| 97, 88, 86, 79, 77, 00, /*; 64 bit BQ=2 */ |
| 00, 87, 85, 78, 76, 54, /*; 64 bit BQ=1 */ |
| 97, 88, 86, 79, 77, 00, /*; 128 bit BQ=2 */ |
| 00, 79, 77, 70, 68, 48, /*; 128 bit BQ=1 */ |
| 80, 72, 69, 63, 61, 00, /*; 64 bit BQ=2 */ |
| 00, 70, 68, 61, 59, 37, /*; 64 bit BQ=1 */ |
| 86, 77, 75, 68, 66, 00, /*; 128 bit BQ=2 */ |
| 00, 68, 66, 59, 57, 37 /*; 128 bit BQ=1 */ |
| }; |
| const UCHAR LatencyFactor730[] = { |
| 69, 63, 61, |
| 86, 79, 77, |
| 103, 96, 94, |
| 120,113,111, |
| 137,130,128, /* <-- last entry, data below */ |
| 137,130,128, /* to avoid using illegal values */ |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| 137,130,128, |
| }; |
| const UCHAR ThLowB[] = { |
| 81, 4, 72, 6, 88, 8,120,12, |
| 55, 4, 54, 6, 66, 8, 90,12, |
| 42, 4, 45, 6, 55, 8, 75,12 |
| }; |
| const UCHAR ThTiming[] = { |
| 1, 2, 2, 3, 0, 1, 1, 2 |
| }; |
| |
| SelectRate_backup = SiS_Pr->SiS_SelectCRT2Rate; |
| |
| if(!SiS_Pr->CRT1UsesCustomMode) { |
| |
| CRT1ModeNo = SiS_Pr->SiS_CRT1Mode; /* get CRT1 ModeNo */ |
| SiS_SearchModeID(SiS_Pr, &CRT1ModeNo, &modeidindex); |
| SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2); |
| SiS_Pr->SiS_SelectCRT2Rate = 0; |
| refreshratetableindex = SiS_GetRatePtr(SiS_Pr, CRT1ModeNo, modeidindex, HwInfo); |
| |
| if(CRT1ModeNo >= 0x13) { |
| index = SiS_Pr->SiS_RefIndex[refreshratetableindex].Ext_CRTVCLK; |
| index &= 0x3F; |
| VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK; /* Get VCLK */ |
| |
| colorth = SiS_GetColorDepth(SiS_Pr,CRT1ModeNo,modeidindex); /* Get colordepth */ |
| colorth >>= 1; |
| if(!colorth) colorth++; |
| } |
| |
| } else { |
| |
| CRT1ModeNo = 0xfe; |
| VCLK = SiS_Pr->CSRClock_CRT1; /* Get VCLK */ |
| data2 = (SiS_Pr->CModeFlag_CRT1 & ModeTypeMask) - 2; |
| switch(data2) { /* Get color depth */ |
| case 0 : colorth = 1; break; |
| case 1 : colorth = 1; break; |
| case 2 : colorth = 2; break; |
| case 3 : colorth = 2; break; |
| case 4 : colorth = 3; break; |
| case 5 : colorth = 4; break; |
| default: colorth = 2; |
| } |
| |
| } |
| |
| if(CRT1ModeNo >= 0x13) { |
| if(HwInfo->jChipType == SIS_300) { |
| index = SiS_GetReg(SiS_Pr->SiS_P3c4,0x3A); |
| } else { |
| index = SiS_GetReg(SiS_Pr->SiS_P3c4,0x1A); |
| } |
| index &= 0x07; |
| MCLK = SiS_Pr->SiS_MCLKData_0[index].CLOCK; /* Get MCLK */ |
| |
| data2 = (colorth * VCLK) / MCLK; |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x14); |
| temp = ((temp & 0x00FF) >> 6) << 1; |
| if(temp == 0) temp = 1; |
| temp <<= 2; |
| temp &= 0xff; |
| |
| data2 = temp - data2; |
| |
| if((28 * 16) % data2) { |
| data2 = (28 * 16) / data2; |
| data2++; |
| } else { |
| data2 = (28 * 16) / data2; |
| } |
| |
| if(HwInfo->jChipType == SIS_300) { |
| |
| tempah = SiS_GetReg(SiS_Pr->SiS_P3c4,0x18); |
| tempah &= 0x62; |
| tempah >>= 1; |
| tempal = tempah; |
| tempah >>= 3; |
| tempal |= tempah; |
| tempal &= 0x07; |
| tempcl = ThTiming[tempal]; |
| tempbx = SiS_GetReg(SiS_Pr->SiS_P3c4,0x16); |
| tempbx >>= 6; |
| tempah = SiS_GetReg(SiS_Pr->SiS_P3c4,0x14); |
| tempah >>= 4; |
| tempah &= 0x0c; |
| tempbx |= tempah; |
| tempbx <<= 1; |
| tempal = ThLowB[tempbx + 1]; |
| tempal *= tempcl; |
| tempal += ThLowB[tempbx]; |
| data = tempal; |
| |
| } else if(HwInfo->jChipType == SIS_730) { |
| |
| #ifdef LINUX_KERNEL |
| SiS_SetRegLong(0xcf8,0x80000050); |
| eax = SiS_GetRegLong(0xcfc); |
| #else |
| eax = pciReadLong(0x00000000, 0x50); |
| #endif |
| tempal = (USHORT)(eax >> 8); |
| tempal &= 0x06; |
| tempal <<= 5; |
| |
| #ifdef LINUX_KERNEL |
| SiS_SetRegLong(0xcf8,0x800000A0); |
| eax = SiS_GetRegLong(0xcfc); |
| #else |
| eax = pciReadLong(0x00000000, 0xA0); |
| #endif |
| temp = (USHORT)(eax >> 28); |
| temp &= 0x0F; |
| tempal |= temp; |
| |
| tempbx = tempal; /* BIOS BUG (2.04.5d, 2.04.6a use ah here, which is unset!) */ |
| tempbx = 0; /* -- do it like the BIOS anyway... */ |
| tempax = tempbx; |
| tempbx &= 0xc0; |
| tempbx >>= 6; |
| tempax &= 0x0f; |
| tempax *= 3; |
| tempbx += tempax; |
| |
| data = LatencyFactor730[tempbx]; |
| data += 15; |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x14); |
| if(!(temp & 0x80)) data += 5; |
| |
| } else { |
| |
| index = 0; |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x14); |
| if(temp & 0x0080) index += 12; |
| |
| #ifdef LINUX_KERNEL |
| SiS_SetRegLong(0xcf8,0x800000A0); |
| eax = SiS_GetRegLong(0xcfc); |
| #else |
| /* We use pci functions X offers. We use tag 0, because |
| * we want to read/write to the host bridge (which is always |
| * 00:00.0 on 630, 730 and 540), not the VGA device. |
| */ |
| eax = pciReadLong(0x00000000, 0xA0); |
| #endif |
| temp = (USHORT)(eax >> 24); |
| if(!(temp&0x01)) index += 24; |
| |
| #ifdef LINUX_KERNEL |
| SiS_SetRegLong(0xcf8,0x80000050); |
| eax = SiS_GetRegLong(0xcfc); |
| #else |
| eax = pciReadLong(0x00000000, 0x50); |
| #endif |
| temp=(USHORT)(eax >> 24); |
| if(temp & 0x01) index += 6; |
| |
| temp = (temp & 0x0F) >> 1; |
| index += temp; |
| |
| data = LatencyFactor[index]; |
| data += 15; |
| temp = SiS_GetReg(SiS_Pr->SiS_P3c4,0x14); |
| if(!(temp & 0x80)) data += 5; |
| } |
| |
| data += data2; /* CRT1 Request Period */ |
| |
| SiS_Pr->SiS_SetFlag |= ProgrammingCRT2; |
| SiS_Pr->SiS_SelectCRT2Rate = SelectRate_backup; |
| |
| if(!SiS_Pr->UseCustomMode) { |
| |
| CRT2ModeNo = ModeNo; |
| SiS_SearchModeID(SiS_Pr, &CRT2ModeNo, &modeidindex); |
| |
| refreshratetableindex = SiS_GetRatePtr(SiS_Pr, CRT2ModeNo, modeidindex, HwInfo); |
| |
| index = SiS_GetVCLK2Ptr(SiS_Pr,CRT2ModeNo,modeidindex, |
| refreshratetableindex,HwInfo); |
| VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK; /* Get VCLK */ |
| |
| if((SiS_Pr->SiS_CustomT == CUT_BARCO1366) || (SiS_Pr->SiS_CustomT == CUT_BARCO1024)) { |
| if(SiS_Pr->SiS_UseROM) { |
| if(ROMAddr[0x220] & 0x01) { |
| VCLK = ROMAddr[0x229] | (ROMAddr[0x22a] << 8); |
| } |
| } |
| } |
| |
| } else { |
| |
| CRT2ModeNo = 0xfe; |
| VCLK = SiS_Pr->CSRClock; /* Get VCLK */ |
| |
| } |
| |
| colorth = SiS_GetColorDepth(SiS_Pr,CRT2ModeNo,modeidindex); /* Get colordepth */ |
| colorth >>= 1; |
| if(!colorth) colorth++; |
| |
| data = data * VCLK * colorth; |
| if(data % (MCLK << 4)) { |
| data = data / (MCLK << 4); |
| data++; |
| } else { |
| data = data / (MCLK << 4); |
| } |
| |
| if(data <= 6) data = 6; |
| if(data > 0x14) data = 0x14; |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x01); |
| if(HwInfo->jChipType == SIS_300) { |
| if(data <= 0x0f) temp = (temp & (~0x1F)) | 0x13; |
| else temp = (temp & (~0x1F)) | 0x16; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| temp = (temp & (~0x1F)) | 0x13; |
| } |
| } else { |
| if( ( (HwInfo->jChipType == SIS_630) || |
| (HwInfo->jChipType == SIS_730) ) && |
| (HwInfo->jChipRevision >= 0x30) ) /* 630s or 730(s?) */ |
| { |
| temp = (temp & (~0x1F)) | 0x1b; |
| } else { |
| temp = (temp & (~0x1F)) | 0x16; |
| } |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x01,0xe0,temp); |
| |
| if( (HwInfo->jChipType == SIS_630) && |
| (HwInfo->jChipRevision >= 0x30) ) /* 630s, NOT 730 */ |
| { |
| if(data > 0x13) data = 0x13; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x02,0xe0,data); |
| |
| } else { /* If mode <= 0x13, we just restore everything */ |
| |
| SiS_Pr->SiS_SetFlag |= ProgrammingCRT2; |
| SiS_Pr->SiS_SelectCRT2Rate = SelectRate_backup; |
| |
| } |
| } |
| #endif |
| |
| /* Set CRT2 FIFO on 315/330 series */ |
| #ifdef SIS315H |
| static void |
| SiS_SetCRT2FIFO_310(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x01,0x3B); |
| if( (HwInfo->jChipType == SIS_760) && |
| (SiS_Pr->SiS_SysFlags & SF_760LFB) && |
| (SiS_Pr->SiS_ModeType == Mode32Bpp) && |
| (SiS_Pr->SiS_VGAHDE >= 1280) && |
| (SiS_Pr->SiS_VGAVDE >= 1024) ) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2f,0x03); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x01,0x3b); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x4d,0xc0); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2f,0x01); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x4d,0xc0); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x02,0x6e); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x02,~0x3f,0x04); |
| } |
| |
| } |
| #endif |
| |
| static USHORT |
| SiS_GetVGAHT2(SiS_Private *SiS_Pr) |
| { |
| ULONG tempax,tempbx; |
| |
| tempbx = (SiS_Pr->SiS_VGAVT - SiS_Pr->SiS_VGAVDE) * SiS_Pr->SiS_RVBHCMAX; |
| tempax = (SiS_Pr->SiS_VT - SiS_Pr->SiS_VDE) * SiS_Pr->SiS_RVBHCFACT; |
| tempax = (tempax * SiS_Pr->SiS_HT) / tempbx; |
| return((USHORT)tempax); |
| } |
| |
| /* Set Part 1 / SiS bridge slave mode */ |
| static void |
| SiS_SetGroup1_301(SiS_Private *SiS_Pr, USHORT ModeNo,USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo,USHORT RefreshRateTableIndex) |
| { |
| USHORT push1,push2; |
| USHORT tempax,tempbx,tempcx,temp; |
| USHORT resinfo,modeflag,xres=0; |
| unsigned char p1_7, p1_8; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| resinfo = 0; |
| xres = SiS_Pr->CHDisplay; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| xres = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].XRes; |
| } |
| |
| /* The following is only done if bridge is in slave mode: */ |
| |
| if((HwInfo->jChipType >= SIS_661) && (ModeNo > 0x13)) { |
| if(xres >= 1600) { |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x31,0x04); |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x03,0xff); /* set MAX HT */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) modeflag |= Charx8Dot; |
| |
| if(modeflag & Charx8Dot) tempcx = 0x08; |
| else tempcx = 0x09; |
| |
| tempax = SiS_Pr->SiS_VGAHDE; /* 0x04 Horizontal Display End */ |
| if(modeflag & HalfDCLK) tempax >>= 1; |
| tempax = ((tempax / tempcx) - 1) & 0xff; |
| tempbx = tempax; |
| |
| temp = tempax; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x04,temp); |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV)) { |
| temp += 2; |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if(resinfo == SIS_RI_800x600) temp -= 2; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x05,temp); /* 0x05 Horizontal Display Start */ |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x06,0x03); /* 0x06 Horizontal Blank end */ |
| |
| tempax = 0xFFFF; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) tempax = SiS_GetVGAHT2(SiS_Pr); |
| if(tempax >= SiS_Pr->SiS_VGAHT) tempax = SiS_Pr->SiS_VGAHT; |
| if(modeflag & HalfDCLK) tempax >>= 1; |
| tempax = (tempax / tempcx) - 5; |
| tempcx = tempax; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| temp = tempcx - 1; |
| if(!(modeflag & HalfDCLK)) { |
| temp -= 6; |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| temp -= 2; |
| if(ModeNo > 0x13) temp -= 10; |
| } |
| } |
| } else { |
| tempcx = (tempcx + tempbx) >> 1; |
| temp = (tempcx & 0x00FF) + 2; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| temp--; |
| if(!(modeflag & HalfDCLK)) { |
| if((modeflag & Charx8Dot)) { |
| temp += 4; |
| if(SiS_Pr->SiS_VGAHDE >= 800) temp -= 6; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VGAHDE == 800) temp += 2; |
| } |
| } |
| } |
| } else { |
| if(!(modeflag & HalfDCLK)) { |
| temp -= 4; |
| if((SiS_Pr->SiS_LCDResInfo != Panel_1280x960) && |
| (SiS_Pr->SiS_LCDResInfo != Panel_1600x1200)) { |
| if(SiS_Pr->SiS_VGAHDE >= 800) { |
| temp -= 7; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_ModeType == ModeEGA) { |
| if(SiS_Pr->SiS_VGAVDE == 1024) { |
| temp += 15; |
| if(SiS_Pr->SiS_LCDResInfo != Panel_1280x1024) |
| temp += 7; |
| } |
| } |
| } |
| if(SiS_Pr->SiS_LCDResInfo != Panel_1400x1050) { |
| if(SiS_Pr->SiS_VGAHDE >= 1280) { |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) temp += 28; |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| p1_7 = temp; |
| p1_8 = 0x00; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| if(ModeNo <= 0x01) { |
| p1_7 = 0x2a; |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) p1_8 = 0x61; |
| else p1_8 = 0x41; |
| } else if(SiS_Pr->SiS_ModeType == ModeText) { |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) p1_7 = 0x54; |
| else p1_7 = 0x55; |
| p1_8 = 0x00; |
| } else if(ModeNo <= 0x13) { |
| if(modeflag & HalfDCLK) { |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { |
| p1_7 = 0x30; |
| p1_8 = 0x03; |
| } else { |
| p1_7 = 0x2f; |
| p1_8 = 0x02; |
| } |
| } else { |
| p1_7 = 0x5b; |
| p1_8 = 0x03; |
| } |
| } else if( ((HwInfo->jChipType >= SIS_315H) && |
| ((ModeNo == 0x50) || (ModeNo == 0x56) || (ModeNo == 0x53))) || |
| ((HwInfo->jChipType < SIS_315H) && |
| (resinfo == SIS_RI_320x200 || resinfo == SIS_RI_320x240)) ) { |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { |
| p1_7 = 0x30, |
| p1_8 = 0x03; |
| } else { |
| p1_7 = 0x2f; |
| p1_8 = 0x03; |
| } |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(SiS_Pr->SiS_TVMode & (TVSetYPbPr525p|TVSetYPbPr750p)) { |
| p1_7 = 0x63; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) p1_7 = 0x55; |
| } |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| if(!(modeflag & HalfDCLK)) { |
| p1_7 = 0xb2; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) { |
| p1_7 = 0xab; |
| } |
| } |
| } else { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) { |
| if(modeflag & HalfDCLK) p1_7 = 0x30; |
| } |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,p1_7); /* 0x07 Horizontal Retrace Start */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,p1_8); /* 0x08 Horizontal Retrace End */ |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x03); /* 0x18 SR08 (FIFO Threshold?) */ |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x19,0xF0); |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x09,0xFF); /* 0x09 Set Max VT */ |
| |
| tempcx = 0x121; |
| tempbx = SiS_Pr->SiS_VGAVDE; /* 0x0E Vertical Display End */ |
| if (tempbx == 357) tempbx = 350; |
| else if(tempbx == 360) tempbx = 350; |
| else if(tempbx == 375) tempbx = 350; |
| else if(tempbx == 405) tempbx = 400; |
| else if(tempbx == 420) tempbx = 400; |
| else if(tempbx == 525) tempbx = 480; |
| push2 = tempbx; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) { |
| if (tempbx == 350) tempbx += 5; |
| else if(tempbx == 480) tempbx += 5; |
| } |
| } |
| } |
| tempbx -= 2; |
| temp = tempbx & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x10,temp); /* 0x10 vertical Blank Start */ |
| |
| tempbx = push2; |
| tempbx--; |
| temp = tempbx & 0x00FF; |
| #if 0 |
| /* Missing code from 630/301B 2.04.5a and 650/302LV 1.10.6s (calles int 2f) */ |
| if(xxx()) { |
| if(temp == 0xdf) temp = 0xda; |
| } |
| #endif |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0E,temp); |
| |
| temp = 0; |
| if(modeflag & DoubleScanMode) temp |= 0x80; |
| if(HwInfo->jChipType >= SIS_661) { |
| if(tempbx & 0x0200) temp |= 0x20; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x0B,0x5F,temp); |
| if(tempbx & 0x0100) tempcx |= 0x000a; |
| if(tempbx & 0x0400) tempcx |= 0x1200; |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0B,temp); |
| if(tempbx & 0x0100) tempcx |= 0x0002; |
| if(tempbx & 0x0400) tempcx |= 0x0600; |
| } |
| |
| if(tempbx & 0x0200) tempcx |= 0x0040; |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x11,0x00); /* 0x11 Vertical Blank End */ |
| |
| tempax = (SiS_Pr->SiS_VGAVT - tempbx) >> 2; |
| |
| if((ModeNo > 0x13) || (HwInfo->jChipType < SIS_315H)) { |
| if(resinfo != SIS_RI_1280x1024) { |
| tempbx += (tempax << 1); |
| } |
| } else if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_LCDResInfo != Panel_1400x1050) { |
| tempbx += (tempax << 1); |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| tempbx -= 10; |
| } else { |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| tempbx += 40; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VGAHDE == 800) tempbx += 10; |
| } |
| } |
| } |
| } |
| tempax >>= 2; |
| tempax++; |
| tempax += tempbx; |
| push1 = tempax; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| if(tempbx <= 513) { |
| if(tempax >= 513) tempbx = 513; |
| } |
| } |
| temp = tempbx & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0C,temp); /* 0x0C Vertical Retrace Start */ |
| |
| tempbx--; |
| temp = tempbx & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x10,temp); |
| |
| if(tempbx & 0x0100) tempcx |= 0x0008; |
| |
| if(tempbx & 0x0200) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x0B,0x20); |
| } |
| tempbx++; |
| |
| if(tempbx & 0x0100) tempcx |= 0x0004; |
| if(tempbx & 0x0200) tempcx |= 0x0080; |
| if(tempbx & 0x0400) { |
| if(HwInfo->jChipType >= SIS_661) tempcx |= 0x0800; |
| else if(SiS_Pr->SiS_VBType & VB_SIS301) tempcx |= 0x0800; |
| else tempcx |= 0x0C00; |
| } |
| |
| tempbx = push1; |
| temp = tempbx & 0x000F; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0D,temp); /* 0x0D vertical Retrace End */ |
| |
| if(tempbx & 0x0010) tempcx |= 0x2000; |
| |
| temp = tempcx & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0A,temp); /* 0x0A CR07 */ |
| |
| temp = (tempcx & 0xFF00) >> 8; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x17,temp); /* 0x17 SR0A */ |
| |
| tempax = modeflag; |
| temp = (tempax & 0xFF00) >> 8; |
| temp = (temp >> 1) & 0x09; |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301)) temp |= 0x01; /* Always 8 dotclock */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x16,temp); /* 0x16 SR01 */ |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0F,0x00); /* 0x0F CR14 */ |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x12,0x00); /* 0x12 CR17 */ |
| |
| temp = 0x00; |
| if(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit) { |
| if(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x01) { |
| temp = 0x80; |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1A,temp); /* 0x1A SR0E */ |
| |
| temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02)); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp); |
| } |
| |
| /* Setup panel link |
| * This is used for LVDS, LCDA and Chrontel TV output |
| * 300/LVDS+TV, 300/301B-DH, 315/LVDS+TV, 315/LCDA |
| */ |
| static void |
| SiS_SetGroup1_LVDS(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo, USHORT RefreshRateTableIndex) |
| { |
| USHORT modeflag,resinfo; |
| USHORT push2,tempax,tempbx,tempcx,temp; |
| ULONG tempeax=0,tempebx,tempecx,tempvcfact=0; |
| BOOLEAN islvds = FALSE, issis = FALSE, chkdclkfirst = FALSE; |
| #ifdef SIS300 |
| USHORT crt2crtc; |
| #endif |
| #ifdef SIS315H |
| USHORT pushcx; |
| #endif |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| #ifdef SIS300 |
| crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| #endif |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| resinfo = 0; |
| #ifdef SIS300 |
| crt2crtc = 0; |
| #endif |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| #ifdef SIS300 |
| crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| #endif |
| } |
| |
| /* is lvds if really LVDS, or 301B-DH with external LVDS transmitter */ |
| if((SiS_Pr->SiS_IF_DEF_LVDS == 1) || (SiS_Pr->SiS_VBType & VB_NoLCD)) { |
| islvds = TRUE; |
| } |
| |
| /* is really sis if sis bridge, but not 301B-DH */ |
| if((SiS_Pr->SiS_VBType & VB_SISVB) && (!(SiS_Pr->SiS_VBType & VB_NoLCD))) { |
| issis = TRUE; |
| } |
| |
| if((HwInfo->jChipType >= SIS_315H) && (islvds) && (!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA))) { |
| if((!SiS_Pr->SiS_IF_DEF_FSTN) && (!SiS_Pr->SiS_IF_DEF_DSTN)) { |
| chkdclkfirst = TRUE; |
| } |
| } |
| |
| #ifdef SIS315H |
| if((HwInfo->jChipType >= SIS_315H) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| if(IS_SIS330) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10); |
| } else if(IS_SIS740) { |
| if(islvds) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,0xfb,0x04); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x03); |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10); |
| } |
| } else { |
| if(islvds) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,0xfb,0x04); |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x00); |
| } else if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x2D,0x0f); |
| if(SiS_Pr->SiS_VBType & VB_SIS301C) { |
| if((SiS_Pr->SiS_LCDResInfo == Panel_1024x768) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1280x1024)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x20); |
| } |
| } |
| } |
| } |
| } |
| #endif |
| |
| /* Horizontal */ |
| |
| tempax = SiS_Pr->SiS_LCDHDES; |
| if(islvds) { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if((!SiS_Pr->SiS_IF_DEF_FSTN) && (!SiS_Pr->SiS_IF_DEF_DSTN)) { |
| if((SiS_Pr->SiS_LCDResInfo == Panel_640x480) && |
| (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode))) { |
| tempax -= 8; |
| } |
| } |
| } |
| } |
| |
| temp = (tempax & 0x0007); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1A,temp); /* BPLHDESKEW[2:0] */ |
| temp = (tempax >> 3) & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x16,temp); /* BPLHDESKEW[10:3] */ |
| |
| tempbx = SiS_Pr->SiS_HDE; |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if((SiS_Pr->SiS_LCDResInfo == Panel_640x480_2) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_640x480_3)) { |
| tempbx >>= 1; |
| } |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| tempbx = SiS_Pr->PanelXRes; |
| } |
| } |
| |
| tempax += tempbx; |
| if(tempax >= SiS_Pr->SiS_HT) tempax -= SiS_Pr->SiS_HT; |
| |
| temp = tempax; |
| if(temp & 0x07) temp += 8; |
| temp >>= 3; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x17,temp); /* BPLHDEE */ |
| |
| tempcx = (SiS_Pr->SiS_HT - tempbx) >> 2; |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| if(SiS_Pr->PanelHRS != 999) tempcx = SiS_Pr->PanelHRS; |
| } |
| } |
| |
| tempcx += tempax; |
| if(tempcx >= SiS_Pr->SiS_HT) tempcx -= SiS_Pr->SiS_HT; |
| |
| temp = (tempcx >> 3) & 0x00FF; |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(SiS_Pr->SiS_IF_DEF_TRUMPION) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| switch(ModeNo) { |
| case 0x04: |
| case 0x05: |
| case 0x0d: temp = 0x56; break; |
| case 0x10: temp = 0x60; break; |
| case 0x13: temp = 0x5f; break; |
| case 0x40: |
| case 0x41: |
| case 0x4f: |
| case 0x43: |
| case 0x44: |
| case 0x62: |
| case 0x56: |
| case 0x53: |
| case 0x5d: |
| case 0x5e: temp = 0x54; break; |
| } |
| } |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x14,temp); /* BPLHRS */ |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| temp += 2; |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| temp += 8; |
| if(SiS_Pr->PanelHRE != 999) { |
| temp = tempcx + SiS_Pr->PanelHRE; |
| if(temp >= SiS_Pr->SiS_HT) temp -= SiS_Pr->SiS_HT; |
| temp >>= 3; |
| } |
| } |
| } else { |
| temp += 10; |
| } |
| |
| temp &= 0x1F; |
| temp |= ((tempcx & 0x07) << 5); |
| #if 0 |
| if(SiS_Pr->SiS_IF_DEF_FSTN) temp = 0x20; /* WRONG? BIOS loads cl, not ah */ |
| #endif |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x15,temp); /* BPLHRE */ |
| |
| /* Vertical */ |
| |
| tempax = SiS_Pr->SiS_VGAVDE; |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| tempax = SiS_Pr->PanelYRes; |
| } |
| } |
| |
| tempbx = SiS_Pr->SiS_LCDVDES + tempax; |
| if(tempbx >= SiS_Pr->SiS_VT) tempbx -= SiS_Pr->SiS_VT; |
| |
| push2 = tempbx; |
| |
| tempcx = SiS_Pr->SiS_VGAVT - SiS_Pr->SiS_VGAVDE; |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| tempcx = SiS_Pr->SiS_VGAVT - SiS_Pr->PanelYRes; |
| } |
| } |
| } |
| if(islvds) tempcx >>= 1; |
| else tempcx >>= 2; |
| |
| if( (SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) && |
| (!(SiS_Pr->SiS_LCDInfo & LCDPass11)) && |
| (SiS_Pr->PanelVRS != 999) ) { |
| tempcx = SiS_Pr->PanelVRS; |
| tempbx += tempcx; |
| if(issis) tempbx++; |
| } else { |
| tempbx += tempcx; |
| if(HwInfo->jChipType < SIS_315H) tempbx++; |
| else if(issis) tempbx++; |
| } |
| |
| if(tempbx >= SiS_Pr->SiS_VT) tempbx -= SiS_Pr->SiS_VT; /* BPLVRS */ |
| |
| temp = tempbx & 0x00FF; |
| if(SiS_Pr->SiS_IF_DEF_TRUMPION) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(ModeNo == 0x10) temp = 0xa9; |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,temp); |
| |
| tempcx >>= 3; |
| tempcx++; |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| if(SiS_Pr->PanelVRE != 999) tempcx = SiS_Pr->PanelVRE; |
| } |
| } |
| |
| tempcx += tempbx; |
| temp = tempcx & 0x000F; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0xF0,temp); /* BPLVRE */ |
| |
| temp = ((tempbx >> 8) & 0x07) << 3; |
| if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) { |
| if(SiS_Pr->SiS_HDE != 640) { |
| if(SiS_Pr->SiS_VGAVDE != SiS_Pr->SiS_VDE) temp |= 0x40; |
| } |
| } else if(SiS_Pr->SiS_VGAVDE != SiS_Pr->SiS_VDE) temp |= 0x40; |
| if(SiS_Pr->SiS_SetFlag & EnableLVDSDDA) temp |= 0x40; |
| tempbx = 0x87; |
| if((HwInfo->jChipType >= SIS_315H) || |
| (HwInfo->jChipRevision >= 0x30)) { |
| tempbx = 0x07; |
| if((SiS_Pr->SiS_IF_DEF_CH70xx == 1) && (SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) { |
| if(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x03) temp |= 0x80; |
| } |
| /* Chrontel 701x operates in 24bit mode (8-8-8, 2x12bit mutliplexed) via VGA2 */ |
| if(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| if(SiS_GetReg(SiS_Pr->SiS_P3c4,0x06) & 0x10) temp |= 0x80; |
| } else { |
| if(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x01) temp |= 0x80; |
| } |
| } |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x1A,tempbx,temp); |
| |
| tempbx = push2; /* BPLVDEE */ |
| |
| tempcx = SiS_Pr->SiS_LCDVDES; /* BPLVDES */ |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_640x480: |
| tempbx = SiS_Pr->SiS_VGAVDE - 1; |
| tempcx = SiS_Pr->SiS_VGAVDE; |
| break; |
| case Panel_800x600: |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| if(resinfo == SIS_RI_800x600) tempcx++; |
| } |
| break; |
| case Panel_1024x600: |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| if(resinfo == SIS_RI_1024x600) tempcx++; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if(resinfo == SIS_RI_800x600) tempcx++; |
| } |
| } |
| break; |
| case Panel_1024x768: |
| if(HwInfo->jChipType < SIS_315H) { |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| if(resinfo == SIS_RI_1024x768) tempcx++; |
| } |
| } |
| break; |
| } |
| } |
| |
| temp = ((tempbx >> 8) & 0x07) << 3; |
| temp = temp | ((tempcx >> 8) & 0x07); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1D,temp); |
| /* if(SiS_Pr->SiS_IF_DEF_FSTN) tempbx++; */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1C,tempbx); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1B,tempcx); |
| |
| /* Vertical scaling */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* 300 series */ |
| tempeax = SiS_Pr->SiS_VGAVDE << 6; |
| temp = (tempeax % (ULONG)SiS_Pr->SiS_VDE); |
| tempeax = tempeax / (ULONG)SiS_Pr->SiS_VDE; |
| if(temp) tempeax++; |
| |
| if(SiS_Pr->SiS_SetFlag & EnableLVDSDDA) tempeax = 0x3F; |
| |
| temp = (USHORT)(tempeax & 0x00FF); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1E,temp); /* BPLVCFACT */ |
| tempvcfact = temp; |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* 315 series */ |
| tempeax = SiS_Pr->SiS_VGAVDE << 18; |
| tempebx = SiS_Pr->SiS_VDE; |
| temp = (tempeax % tempebx); |
| tempeax = tempeax / tempebx; |
| if(temp) tempeax++; |
| tempvcfact = tempeax; |
| |
| temp = (USHORT)(tempeax & 0x00FF); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x37,temp); |
| temp = (USHORT)((tempeax & 0x00FF00) >> 8); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x36,temp); |
| temp = (USHORT)((tempeax & 0x00030000) >> 16); |
| if(SiS_Pr->SiS_VDE == SiS_Pr->SiS_VGAVDE) temp |= 0x04; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x35,temp); |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302ELV)) { |
| temp = (USHORT)(tempeax & 0x00FF); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x3c,temp); |
| temp = (USHORT)((tempeax & 0x00FF00) >> 8); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x3b,temp); |
| temp = (USHORT)(((tempeax & 0x00030000) >> 16) << 6); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x3a,0x3f,temp); |
| temp = 0; |
| if(SiS_Pr->SiS_VDE != SiS_Pr->SiS_VGAVDE) temp |= 0x08; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x30,0xf3,temp); |
| } |
| #endif |
| |
| } |
| |
| /* Horizontal scaling */ |
| |
| tempeax = SiS_Pr->SiS_VGAHDE; /* 1f = ( (VGAHDE * 65536) / ( (VGAHDE * 65536) / HDE ) ) - 1*/ |
| if(chkdclkfirst) { |
| if(modeflag & HalfDCLK) tempeax >>= 1; |
| } |
| tempebx = tempeax << 16; |
| if(SiS_Pr->SiS_HDE == tempeax) { |
| tempecx = 0xFFFF; |
| } else { |
| tempecx = tempebx / SiS_Pr->SiS_HDE; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(tempebx % SiS_Pr->SiS_HDE) tempecx++; |
| } |
| } |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| tempeax = (tempebx / tempecx) - 1; |
| } else { |
| tempeax = ((SiS_Pr->SiS_VGAHT << 16) / tempecx) - 1; |
| } |
| tempecx = (tempecx << 16) | (tempeax & 0xFFFF); |
| temp = (USHORT)(tempecx & 0x00FF); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1F,temp); |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| tempeax = (SiS_Pr->SiS_VGAVDE << 18) / tempvcfact; |
| tempbx = (USHORT)(tempeax & 0xFFFF); |
| } else { |
| tempeax = SiS_Pr->SiS_VGAVDE << 6; |
| tempbx = tempvcfact & 0x3f; |
| if(tempbx == 0) tempbx = 64; |
| tempeax /= tempbx; |
| tempbx = (USHORT)(tempeax & 0xFFFF); |
| } |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) tempbx--; |
| if(SiS_Pr->SiS_SetFlag & EnableLVDSDDA) { |
| if((!SiS_Pr->SiS_IF_DEF_FSTN) && (!SiS_Pr->SiS_IF_DEF_DSTN)) tempbx = 1; |
| else if(SiS_Pr->SiS_LCDResInfo != Panel_640x480) tempbx = 1; |
| } |
| |
| temp = ((tempbx >> 8) & 0x07) << 3; |
| temp = temp | ((tempecx >> 8) & 0x07); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x20,temp); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x21,tempbx); |
| |
| tempecx >>= 16; /* BPLHCFACT */ |
| if(!chkdclkfirst) { |
| if(modeflag & HalfDCLK) tempecx >>= 1; |
| } |
| temp = (USHORT)((tempecx & 0xFF00) >> 8); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x22,temp); |
| temp = (USHORT)(tempecx & 0x00FF); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x23,temp); |
| |
| #ifdef SIS315H |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| if((islvds) || (SiS_Pr->SiS_VBInfo & VB_SIS301LV302LV)) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1e,0x20); |
| } |
| } else { |
| if(islvds) { |
| if(HwInfo->jChipType == SIS_740) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1e,0x03); |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1e,0x23); |
| } |
| } |
| } |
| } |
| #endif |
| |
| #ifdef SIS300 |
| if(SiS_Pr->SiS_IF_DEF_TRUMPION) { |
| int i; |
| UCHAR TrumpMode13[4] = { 0x01, 0x10, 0x2c, 0x00 }; |
| UCHAR TrumpMode10_1[4] = { 0x01, 0x10, 0x27, 0x00 }; |
| UCHAR TrumpMode10_2[4] = { 0x01, 0x16, 0x10, 0x00 }; |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x02,0xbf); |
| for(i=0; i<5; i++) { |
| SiS_SetTrumpionBlock(SiS_Pr, &SiS300_TrumpionData[crt2crtc][0]); |
| } |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(ModeNo == 0x13) { |
| for(i=0; i<4; i++) { |
| SiS_SetTrumpionBlock(SiS_Pr, &TrumpMode13[0]); |
| } |
| } else if(ModeNo == 0x10) { |
| for(i=0; i<4; i++) { |
| SiS_SetTrumpionBlock(SiS_Pr, &TrumpMode10_1[0]); |
| SiS_SetTrumpionBlock(SiS_Pr, &TrumpMode10_2[0]); |
| } |
| } |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x02,0x40); |
| } |
| #endif |
| |
| #ifdef SIS315H |
| if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x25,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x26,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x27,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x28,0x87); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x29,0x5A); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2A,0x4B); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x44,~0x07,0x03); |
| tempax = SiS_Pr->SiS_HDE; /* Blps = lcdhdee(lcdhdes+HDE) + 64 */ |
| if(SiS_Pr->SiS_LCDResInfo == Panel_640x480_2 || |
| SiS_Pr->SiS_LCDResInfo == Panel_640x480_3) tempax >>= 1; |
| tempax += 64; |
| temp = tempax & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x38,temp); |
| temp = ((tempax & 0xFF00) >> 8) << 3; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x35,~0x078,temp); |
| tempax += 32; /* Blpe=lBlps+32 */ |
| temp = tempax & 0x00FF; |
| if(SiS_Pr->SiS_IF_DEF_FSTN) temp = 0; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x39,temp); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3A,0x00); /* Bflml=0 */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x3C,~0x007,0x00); |
| |
| tempax = SiS_Pr->SiS_VDE; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_640x480_2 || |
| SiS_Pr->SiS_LCDResInfo == Panel_640x480_3) tempax >>= 1; |
| tempax >>= 1; |
| temp = tempax & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3B,temp); |
| temp = ((tempax & 0xFF00) >> 8) << 3; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x3C,~0x038,temp); |
| |
| tempeax = SiS_Pr->SiS_HDE; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_640x480_2 || |
| SiS_Pr->SiS_LCDResInfo == Panel_640x480_3) tempeax >>= 1; |
| tempeax <<= 2; /* BDxFIFOSTOP = (HDE*4)/128 */ |
| tempebx = 128; |
| temp = (USHORT)(tempeax % tempebx); |
| tempeax = tempeax / tempebx; |
| if(temp) tempeax++; |
| temp = (USHORT)(tempeax & 0x003F); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x45,~0x0FF,temp); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3F,0x00); /* BDxWadrst0 */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3E,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3D,0x10); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x3C,~0x040,0x00); |
| |
| tempax = SiS_Pr->SiS_HDE; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_640x480_2 || |
| SiS_Pr->SiS_LCDResInfo == Panel_640x480_3) tempax >>= 1; |
| tempax >>= 4; /* BDxWadroff = HDE*4/8/8 */ |
| pushcx = tempax; |
| temp = tempax & 0x00FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x43,temp); |
| temp = ((tempax & 0xFF00) >> 8) << 3; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x44,~0x0F8,temp); |
| |
| tempax = SiS_Pr->SiS_VDE; /* BDxWadrst1 = BDxWadrst0 + BDxWadroff * VDE */ |
| if(SiS_Pr->SiS_LCDResInfo == Panel_640x480_2 || |
| SiS_Pr->SiS_LCDResInfo == Panel_640x480_3) tempax >>= 1; |
| tempeax = (tempax * pushcx); |
| tempebx = 0x00100000 + tempeax; |
| temp = (USHORT)tempebx & 0x000000FF; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x42,temp); |
| temp = (USHORT)((tempebx & 0x0000FF00) >> 8); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x41,temp); |
| temp = (USHORT)((tempebx & 0x00FF0000) >> 16); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x40,temp); |
| temp = (USHORT)(((tempebx & 0x01000000) >> 24) << 7); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x3C,~0x080,temp); |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2F,0x03); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x03,0x50); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x04,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2F,0x01); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x19,0x38); |
| |
| if(SiS_Pr->SiS_IF_DEF_FSTN) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2b,0x02); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2c,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2d,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x35,0x0c); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x36,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x37,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x38,0x80); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x39,0xA0); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3a,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3b,0xf0); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3c,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3d,0x10); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3e,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x3f,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x40,0x10); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x41,0x25); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x42,0x80); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x43,0x14); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x44,0x03); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x45,0x0a); |
| } |
| } |
| #endif /* SIS315H */ |
| } |
| |
| /* Set Part 1 */ |
| static void |
| SiS_SetGroup1(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo, USHORT RefreshRateTableIndex) |
| { |
| #if defined(SIS300) || defined(SIS315H) |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| #endif |
| USHORT temp=0, tempax=0, tempbx=0, tempcx=0, bridgeadd=0; |
| USHORT pushbx=0, CRT1Index=0, modeflag, resinfo=0; |
| #ifdef SIS315H |
| USHORT tempbl=0; |
| #endif |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| SiS_SetGroup1_LVDS(SiS_Pr, ModeNo, ModeIdIndex, HwInfo, RefreshRateTableIndex); |
| return; |
| } |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| } else { |
| CRT1Index = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| } |
| |
| SiS_SetCRT2Offset(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| |
| if( ! ((HwInfo->jChipType >= SIS_315H) && |
| (SiS_Pr->SiS_IF_DEF_LVDS == 1) && |
| (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) ) { |
| |
| if(HwInfo->jChipType < SIS_315H ) { |
| #ifdef SIS300 |
| SiS_SetCRT2FIFO_300(SiS_Pr, ModeNo, HwInfo); |
| #endif |
| } else { |
| #ifdef SIS315H |
| SiS_SetCRT2FIFO_310(SiS_Pr, HwInfo); |
| #endif |
| } |
| |
| /* 1. Horizontal setup */ |
| |
| if(HwInfo->jChipType < SIS_315H ) { |
| |
| #ifdef SIS300 /* ------------- 300 series --------------*/ |
| |
| temp = (SiS_Pr->SiS_VGAHT - 1) & 0x0FF; /* BTVGA2HT 0x08,0x09 */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,temp); /* CRT2 Horizontal Total */ |
| |
| temp = (((SiS_Pr->SiS_VGAHT - 1) & 0xFF00) >> 8) << 4; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0x0f,temp); /* CRT2 Horizontal Total Overflow [7:4] */ |
| |
| temp = (SiS_Pr->SiS_VGAHDE + 12) & 0x0FF; /* BTVGA2HDEE 0x0A,0x0C */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0A,temp); /* CRT2 Horizontal Display Enable End */ |
| |
| pushbx = SiS_Pr->SiS_VGAHDE + 12; /* bx BTVGA2HRS 0x0B,0x0C */ |
| tempcx = (SiS_Pr->SiS_VGAHT - SiS_Pr->SiS_VGAHDE) >> 2; |
| tempbx = pushbx + tempcx; |
| tempcx <<= 1; |
| tempcx += tempbx; |
| |
| bridgeadd = 12; |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* ------------------- 315/330 series --------------- */ |
| |
| tempcx = SiS_Pr->SiS_VGAHT; /* BTVGA2HT 0x08,0x09 */ |
| if(modeflag & HalfDCLK) { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| tempcx >>= 1; |
| } else { |
| tempax = SiS_Pr->SiS_VGAHDE >> 1; |
| tempcx = SiS_Pr->SiS_HT - SiS_Pr->SiS_HDE + tempax; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| tempcx = SiS_Pr->SiS_HT - tempax; |
| } |
| } |
| } |
| tempcx--; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,tempcx); /* CRT2 Horizontal Total */ |
| temp = (tempcx >> 4) & 0xF0; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0x0F,temp); /* CRT2 Horizontal Total Overflow [7:4] */ |
| |
| tempcx = SiS_Pr->SiS_VGAHT; /* BTVGA2HDEE 0x0A,0x0C */ |
| tempbx = SiS_Pr->SiS_VGAHDE; |
| tempcx -= tempbx; |
| tempcx >>= 2; |
| if(modeflag & HalfDCLK) { |
| tempbx >>= 1; |
| tempcx >>= 1; |
| } |
| tempbx += 16; |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0A,tempbx); /* CRT2 Horizontal Display Enable End */ |
| |
| pushbx = tempbx; |
| tempcx >>= 1; |
| tempbx += tempcx; |
| tempcx += tempbx; |
| |
| bridgeadd = 16; |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(HwInfo->jChipType >= SIS_661) { |
| if((SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1280x1024)) { |
| if(resinfo == SIS_RI_1280x1024) { |
| tempcx = (tempcx & 0xff00) | 0x30; |
| } else if(resinfo == SIS_RI_1600x1200) { |
| tempcx = (tempcx & 0xff00) | 0xff; |
| } |
| } |
| } |
| } |
| |
| #endif /* SIS315H */ |
| |
| } /* 315/330 series */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->UseCustomMode) { |
| tempbx = SiS_Pr->CHSyncStart + bridgeadd; |
| tempcx = SiS_Pr->CHSyncEnd + bridgeadd; |
| tempax = SiS_Pr->SiS_VGAHT; |
| if(modeflag & HalfDCLK) tempax >>= 1; |
| tempax--; |
| if(tempcx > tempax) tempcx = tempax; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC) { |
| unsigned char cr4, cr14, cr5, cr15; |
| if(SiS_Pr->UseCustomMode) { |
| cr4 = SiS_Pr->CCRT1CRTC[4]; |
| cr14 = SiS_Pr->CCRT1CRTC[14]; |
| cr5 = SiS_Pr->CCRT1CRTC[5]; |
| cr15 = SiS_Pr->CCRT1CRTC[15]; |
| } else { |
| cr4 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[4]; |
| cr14 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[14]; |
| cr5 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[5]; |
| cr15 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[15]; |
| } |
| tempbx = ((cr4 | ((cr14 & 0xC0) << 2)) - 3) << 3; /* (VGAHRS-3)*8 */ |
| tempcx = (((cr5 & 0x1f) | ((cr15 & 0x04) << (5-2))) - 3) << 3; /* (VGAHRE-3)*8 */ |
| tempcx &= 0x00FF; |
| tempcx |= (tempbx & 0xFF00); |
| tempbx += bridgeadd; |
| tempcx += bridgeadd; |
| tempax = SiS_Pr->SiS_VGAHT; |
| if(modeflag & HalfDCLK) tempax >>= 1; |
| tempax--; |
| if(tempcx > tempax) tempcx = tempax; |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) { |
| tempbx = 1040; |
| tempcx = 1044; /* HWCursor bug! */ |
| } |
| |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0B,tempbx); /* CRT2 Horizontal Retrace Start */ |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0D,tempcx); /* CRT2 Horizontal Retrace End */ |
| |
| temp = ((tempbx >> 8) & 0x0F) | ((pushbx >> 4) & 0xF0); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0C,temp); /* Overflow */ |
| |
| /* 2. Vertical setup */ |
| |
| tempcx = SiS_Pr->SiS_VGAVT - 1; |
| temp = tempcx & 0x00FF; |
| |
| if(HwInfo->jChipType < SIS_661) { |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)) { |
| temp--; |
| } |
| } |
| } else { |
| temp--; |
| } |
| } else if(HwInfo->jChipType >= SIS_315H) { |
| temp--; |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0E,temp); /* CRT2 Vertical Total */ |
| |
| tempbx = SiS_Pr->SiS_VGAVDE - 1; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x0F,tempbx); /* CRT2 Vertical Display Enable End */ |
| |
| temp = ((tempbx >> 5) & 0x38) | ((tempcx >> 8) & 0x07); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x12,temp); /* Overflow */ |
| |
| if((HwInfo->jChipType >= SIS_315H) && (HwInfo->jChipType < SIS_661)) { |
| tempbx++; |
| tempax = tempbx; |
| tempcx++; |
| tempcx -= tempax; |
| tempcx >>= 2; |
| tempbx += tempcx; |
| if(tempcx < 4) tempcx = 4; |
| tempcx >>= 2; |
| tempcx += tempbx; |
| tempcx++; |
| } else { |
| tempbx = (SiS_Pr->SiS_VGAVT + SiS_Pr->SiS_VGAVDE) >> 1; /* BTVGA2VRS 0x10,0x11 */ |
| tempcx = ((SiS_Pr->SiS_VGAVT - SiS_Pr->SiS_VGAVDE) >> 4) + tempbx + 1; /* BTVGA2VRE 0x11 */ |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->UseCustomMode) { |
| tempbx = SiS_Pr->CVSyncStart; |
| tempcx = SiS_Pr->CVSyncEnd; |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC) { |
| unsigned char cr8, cr7, cr13; |
| if(SiS_Pr->UseCustomMode) { |
| cr8 = SiS_Pr->CCRT1CRTC[8]; |
| cr7 = SiS_Pr->CCRT1CRTC[7]; |
| cr13 = SiS_Pr->CCRT1CRTC[13]; |
| tempcx = SiS_Pr->CCRT1CRTC[9]; |
| } else { |
| cr8 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[8]; |
| cr7 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[7]; |
| cr13 = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[13]; |
| tempcx = SiS_Pr->SiS_CRT1Table[CRT1Index].CR[9]; |
| } |
| tempbx = cr8; |
| if(cr7 & 0x04) tempbx |= 0x0100; |
| if(cr7 & 0x80) tempbx |= 0x0200; |
| if(cr13 & 0x08) tempbx |= 0x0400; |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x10,tempbx); /* CRT2 Vertical Retrace Start */ |
| |
| temp = ((tempbx >> 4) & 0x70) | (tempcx & 0x0F); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x11,temp); /* CRT2 Vert. Retrace End; Overflow */ |
| |
| /* 3. Panel delay compensation */ |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| |
| #ifdef SIS300 /* ---------- 300 series -------------- */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| temp = 0x20; |
| if(HwInfo->jChipType == SIS_300) { |
| temp = 0x10; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) temp = 0x2c; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) temp = 0x20; |
| } |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) temp = 0x20; |
| } |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x960) temp = 0x24; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_Custom) temp = 0x2c; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) temp = 0x08; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) temp = 0x2c; |
| else temp = 0x20; |
| } |
| if(SiS_Pr->SiS_UseROM) { |
| if(ROMAddr[0x220] & 0x80) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoYPbPrHiVision) |
| temp = ROMAddr[0x221]; |
| else if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) |
| temp = ROMAddr[0x222]; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) |
| temp = ROMAddr[0x223]; |
| else |
| temp = ROMAddr[0x224]; |
| temp &= 0x3c; |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->PDC != -1) temp = SiS_Pr->PDC & 0x3c; |
| } |
| |
| } else { |
| temp = 0x20; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_640x480) temp = 0x04; |
| } |
| if(SiS_Pr->SiS_UseROM) { |
| if(ROMAddr[0x220] & 0x80) { |
| temp = ROMAddr[0x220] & 0x3c; |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->PDC != -1) temp = SiS_Pr->PDC & 0x3c; |
| } |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp); /* Panel Link Delay Compensation; (Software Command Reset; Power Saving) */ |
| |
| #endif /* SIS300 */ |
| |
| } else { |
| |
| #ifdef SIS315H /* --------------- 315/330 series ---------------*/ |
| |
| if(HwInfo->jChipType < SIS_661) { |
| |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| |
| if(HwInfo->jChipType == SIS_740) temp = 0x03; |
| else temp = 0x00; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) temp = 0x0a; |
| tempbl = 0xF0; |
| if(HwInfo->jChipType == SIS_650) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) tempbl = 0x0F; |
| } |
| } |
| |
| if(SiS_Pr->SiS_IF_DEF_DSTN || SiS_Pr->SiS_IF_DEF_FSTN) { |
| temp = 0x08; |
| tempbl = 0; |
| if((SiS_Pr->SiS_UseROM) && (!(SiS_Pr->SiS_ROMNew))) { |
| if(ROMAddr[0x13c] & 0x80) tempbl = 0xf0; |
| } |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2D,tempbl,temp); /* Panel Link Delay Compensation */ |
| } |
| |
| } /* < 661 */ |
| |
| tempax = 0; |
| if(modeflag & DoubleScanMode) tempax |= 0x80; |
| if(modeflag & HalfDCLK) tempax |= 0x40; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2C,0x3f,tempax); |
| |
| #endif /* SIS315H */ |
| |
| } |
| |
| } /* Slavemode */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if((SiS_Pr->SiS_VBType & VB_NoLCD) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) { |
| /* For 301BDH with LCD, we set up the Panel Link */ |
| SiS_SetGroup1_LVDS(SiS_Pr, ModeNo, ModeIdIndex, HwInfo, RefreshRateTableIndex); |
| } else if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| SiS_SetGroup1_301(SiS_Pr, ModeNo, ModeIdIndex, HwInfo, RefreshRateTableIndex); |
| } |
| } else { |
| if(HwInfo->jChipType < SIS_315H) { |
| SiS_SetGroup1_LVDS(SiS_Pr, ModeNo, ModeIdIndex, HwInfo, RefreshRateTableIndex); |
| } else { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if((!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) || (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| SiS_SetGroup1_LVDS(SiS_Pr, ModeNo,ModeIdIndex, HwInfo,RefreshRateTableIndex); |
| } |
| } else { |
| SiS_SetGroup1_LVDS(SiS_Pr, ModeNo,ModeIdIndex, HwInfo,RefreshRateTableIndex); |
| } |
| } |
| } |
| } |
| |
| /*********************************************/ |
| /* SET PART 2 REGISTER GROUP */ |
| /*********************************************/ |
| |
| #ifdef SIS315H |
| static UCHAR * |
| SiS_GetGroup2CLVXPtr(SiS_Private *SiS_Pr, int tabletype, PSIS_HW_INFO HwInfo) |
| { |
| const UCHAR *tableptr = NULL; |
| USHORT a, b, p = 0; |
| |
| a = SiS_Pr->SiS_VGAHDE; |
| b = SiS_Pr->SiS_HDE; |
| if(tabletype) { |
| a = SiS_Pr->SiS_VGAVDE; |
| b = SiS_Pr->SiS_VDE; |
| } |
| |
| if(a < b) { |
| tableptr = SiS_Part2CLVX_1; |
| } else if(a == b) { |
| tableptr = SiS_Part2CLVX_2; |
| } else { |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| tableptr = SiS_Part2CLVX_4; |
| } else { |
| tableptr = SiS_Part2CLVX_3; |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525i) tableptr = SiS_Part2CLVX_3; |
| else if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) tableptr = SiS_Part2CLVX_3; |
| else tableptr = SiS_Part2CLVX_5; |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| tableptr = SiS_Part2CLVX_6; |
| } |
| do { |
| if((tableptr[p] | tableptr[p+1] << 8) == a) break; |
| p += 0x42; |
| } while((tableptr[p] | tableptr[p+1] << 8) != 0xffff); |
| if((tableptr[p] | tableptr[p+1] << 8) == 0xffff) p -= 0x42; |
| } |
| p += 2; |
| return((UCHAR *)&tableptr[p]); |
| } |
| |
| static void |
| SiS_SetGroup2_C_ELV(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *tableptr; |
| int i, j; |
| UCHAR temp; |
| |
| if(!(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302ELV))) return; |
| |
| tableptr = SiS_GetGroup2CLVXPtr(SiS_Pr, 0, HwInfo); |
| for(i = 0x80, j = 0; i <= 0xbf; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port, i, tableptr[j]); |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| tableptr = SiS_GetGroup2CLVXPtr(SiS_Pr, 1, HwInfo); |
| for(i = 0xc0, j = 0; i <= 0xff; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port, i, tableptr[j]); |
| } |
| } |
| temp = 0x10; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) temp |= 0x04; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x4e,0xeb,temp); |
| } |
| |
| static BOOLEAN |
| SiS_GetCRT2Part2Ptr(SiS_Private *SiS_Pr,USHORT ModeNo,USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex,USHORT *CRT2Index, |
| USHORT *ResIndex,PSIS_HW_INFO HwInfo) |
| { |
| |
| if(HwInfo->jChipType < SIS_315H) return FALSE; |
| |
| if(ModeNo <= 0x13) |
| (*ResIndex) = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| else |
| (*ResIndex) = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| |
| (*ResIndex) &= 0x3f; |
| (*CRT2Index) = 0; |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) { |
| (*CRT2Index) = 200; |
| } |
| } |
| |
| if(SiS_Pr->SiS_CustomT == CUT_ASUSA2H_2) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) (*CRT2Index) = 206; |
| } |
| } |
| return(((*CRT2Index) != 0)); |
| } |
| #endif |
| |
| #ifdef SIS300 |
| static void |
| SiS_Group2LCDSpecial(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT ModeNo, USHORT crt2crtc) |
| { |
| USHORT tempcx; |
| const UCHAR atable[] = { |
| 0xc3,0x9e,0xc3,0x9e,0x02,0x02,0x02, |
| 0xab,0x87,0xab,0x9e,0xe7,0x02,0x02 |
| }; |
| |
| if(!SiS_Pr->UseCustomMode) { |
| if( ( ( (HwInfo->jChipType == SIS_630) || |
| (HwInfo->jChipType == SIS_730) ) && |
| (HwInfo->jChipRevision > 2) ) && |
| (SiS_Pr->SiS_LCDResInfo == Panel_1024x768) && |
| (!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) && |
| (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) ) { |
| if(ModeNo == 0x13) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,0xB9); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,0xCC); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,0xA6); |
| } else { |
| if((crt2crtc & 0x3F) == 4) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x2B); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x13); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,0xE5); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,0x08); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,0xE2); |
| } |
| } |
| } |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_LCDTypeInfo == 0x0c) { |
| crt2crtc &= 0x1f; |
| tempcx = 0; |
| if(!(SiS_Pr->SiS_VBInfo & SetNotSimuMode)) { |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| tempcx += 7; |
| } |
| } |
| tempcx += crt2crtc; |
| if(crt2crtc >= 4) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,0xff); |
| } |
| |
| if(!(SiS_Pr->SiS_VBInfo & SetNotSimuMode)) { |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(crt2crtc == 4) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x28); |
| } |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x18); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,atable[tempcx]); |
| } |
| } |
| } |
| } |
| |
| /* For ECS A907. Highly preliminary. */ |
| static void |
| SiS_Set300Part2Regs(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeIdIndex, USHORT RefreshRateTableIndex, |
| USHORT ModeNo) |
| { |
| USHORT crt2crtc, resindex; |
| int i,j; |
| const SiS_Part2PortTblStruct *CRT2Part2Ptr = NULL; |
| |
| if(HwInfo->jChipType != SIS_300) return; |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV)) return; |
| if(SiS_Pr->UseCustomMode) return; |
| |
| if(ModeNo <= 0x13) { |
| crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else { |
| crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| } |
| |
| resindex = crt2crtc & 0x3F; |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) CRT2Part2Ptr = SiS_Pr->SiS_CRT2Part2_1024x768_1; |
| else CRT2Part2Ptr = SiS_Pr->SiS_CRT2Part2_1024x768_2; |
| |
| /* The BIOS code (1.16.51,56) is obviously a fragment! */ |
| if(ModeNo > 0x13) { |
| CRT2Part2Ptr = SiS_Pr->SiS_CRT2Part2_1024x768_1; |
| resindex = 4; |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x01,0x80,(CRT2Part2Ptr+resindex)->CR[0]); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x02,0x80,(CRT2Part2Ptr+resindex)->CR[1]); |
| for(i = 2, j = 0x04; j <= 0x06; i++, j++ ) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,j,(CRT2Part2Ptr+resindex)->CR[i]); |
| } |
| for(j = 0x1c; j <= 0x1d; i++, j++ ) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,j,(CRT2Part2Ptr+resindex)->CR[i]); |
| } |
| for(j = 0x1f; j <= 0x21; i++, j++ ) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,j,(CRT2Part2Ptr+resindex)->CR[i]); |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,(CRT2Part2Ptr+resindex)->CR[10]); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x25,0x0f,(CRT2Part2Ptr+resindex)->CR[11]); |
| } |
| #endif |
| |
| static void |
| SiS_SetTVSpecial(SiS_Private *SiS_Pr, USHORT ModeNo) |
| { |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV)) return; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoHiVision)) return; |
| if(SiS_Pr->SiS_TVMode & (TVSetYPbPr525p | TVSetYPbPr750p)) return; |
| |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) { |
| const UCHAR specialtv[] = { |
| 0xa7,0x07,0xf2,0x6e,0x17,0x8b,0x73,0x53, |
| 0x13,0x40,0x34,0xf4,0x63,0xbb,0xcc,0x7a, |
| 0x58,0xe4,0x73,0xda,0x13 |
| }; |
| int i, j; |
| for(i = 0x1c, j = 0; i <= 0x30; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,specialtv[j]); |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x43,0x72); |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750)) { |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x14); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x1b); |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x14); /* 15 */ |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x1a); /* 1b */ |
| } |
| } |
| } |
| } else { |
| if((ModeNo == 0x38) || (ModeNo == 0x4a) || (ModeNo == 0x64) || |
| (ModeNo == 0x52) || (ModeNo == 0x58) || (ModeNo == 0x5c)) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x1b); /* 21 */ |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x54); /* 5a */ |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x1a); /* 21 */ |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x53); /* 5a */ |
| } |
| } |
| } |
| |
| static void |
| SiS_SetGroup2_Tail(SiS_Private *SiS_Pr, USHORT ModeNo) |
| { |
| USHORT temp; |
| |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) { |
| if(SiS_Pr->SiS_VGAVDE == 525) { |
| temp = 0xc3; |
| if(SiS_Pr->SiS_ModeType <= ModeVGA) { |
| temp++; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) temp += 2; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x2f,temp); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x30,0xb3); |
| } else if(SiS_Pr->SiS_VGAVDE == 420) { |
| temp = 0x4d; |
| if(SiS_Pr->SiS_ModeType <= ModeVGA) { |
| temp++; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) temp++; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x2f,temp); |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) { |
| if(SiS_Pr->SiS_VBType & VB_SIS301B302B) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x1a,0x03); |
| /* Not always for LV, see SetGrp2 */ |
| } |
| temp = 1; |
| if(ModeNo <= 0x13) temp = 3; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x0b,temp); |
| } |
| #if 0 |
| /* 651+301C, for 1280x768 - do I really need that? */ |
| if((SiS_Pr->SiS_PanelXRes == 1280) && (SiS_Pr->SiS_PanelYRes == 768)) { |
| if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) { |
| if(((SiS_Pr->SiS_HDE == 640) && (SiS_Pr->SiS_VDE == 480)) || |
| ((SiS_Pr->SiS_HDE == 320) && (SiS_Pr->SiS_VDE == 240))) { |
| SiS_SetReg(SiS_Part2Port,0x01,0x2b); |
| SiS_SetReg(SiS_Part2Port,0x02,0x13); |
| SiS_SetReg(SiS_Part2Port,0x04,0xe5); |
| SiS_SetReg(SiS_Part2Port,0x05,0x08); |
| SiS_SetReg(SiS_Part2Port,0x06,0xe2); |
| SiS_SetReg(SiS_Part2Port,0x1c,0x21); |
| SiS_SetReg(SiS_Part2Port,0x1d,0x45); |
| SiS_SetReg(SiS_Part2Port,0x1f,0x0b); |
| SiS_SetReg(SiS_Part2Port,0x20,0x00); |
| SiS_SetReg(SiS_Part2Port,0x21,0xa9); |
| SiS_SetReg(SiS_Part2Port,0x23,0x0b); |
| SiS_SetReg(SiS_Part2Port,0x25,0x04); |
| } |
| } |
| } |
| #endif |
| } |
| } |
| |
| static void |
| SiS_SetGroup2(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex,USHORT RefreshRateTableIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT i, j, tempax, tempbx, tempcx, tempch, tempcl, temp; |
| USHORT push2, modeflag, crt2crtc, bridgeoffset; |
| ULONG longtemp; |
| const UCHAR *PhasePoint; |
| const UCHAR *TimingPoint; |
| #ifdef SIS315H |
| USHORT resindex, CRT2Index; |
| const SiS_Part2PortTblStruct *CRT2Part2Ptr = NULL; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) return; |
| #endif |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| crt2crtc = 0; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| } |
| |
| temp = 0; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToAVIDEO)) temp |= 0x08; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToSVIDEO)) temp |= 0x04; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToSCART) temp |= 0x02; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) temp |= 0x01; |
| |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) temp |= 0x10; |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x00,temp); |
| |
| PhasePoint = SiS_Pr->SiS_PALPhase; |
| TimingPoint = SiS_Pr->SiS_PALTiming; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| |
| TimingPoint = SiS_Pr->SiS_HiTVExtTiming; |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| TimingPoint = SiS_Pr->SiS_HiTVSt2Timing; |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| TimingPoint = SiS_Pr->SiS_HiTVSt1Timing; |
| #if 0 |
| if(!(modeflag & Charx8Dot)) TimingPoint = SiS_Pr->SiS_HiTVTextTiming; |
| #endif |
| } |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) TimingPoint = &SiS_YPbPrTable[2][0]; |
| else if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) TimingPoint = &SiS_YPbPrTable[1][0]; |
| else TimingPoint = &SiS_YPbPrTable[0][0]; |
| |
| PhasePoint = SiS_Pr->SiS_NTSCPhase; |
| |
| } else if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| |
| if( (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && |
| ( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) || |
| (SiS_Pr->SiS_TVMode & TVSetTVSimuMode) ) ) { |
| PhasePoint = SiS_Pr->SiS_PALPhase2; |
| } |
| |
| } else { |
| |
| TimingPoint = SiS_Pr->SiS_NTSCTiming; |
| PhasePoint = SiS_Pr->SiS_NTSCPhase; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) { |
| PhasePoint = SiS_Pr->SiS_PALPhase; |
| } |
| |
| if( (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && |
| ( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) || |
| (SiS_Pr->SiS_TVMode & TVSetTVSimuMode) ) ) { |
| PhasePoint = SiS_Pr->SiS_NTSCPhase2; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) { |
| PhasePoint = SiS_Pr->SiS_PALPhase2; |
| } |
| } |
| |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| PhasePoint = SiS_Pr->SiS_PALMPhase; |
| if( (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && |
| ( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) || |
| (SiS_Pr->SiS_TVMode & TVSetTVSimuMode) ) ) { |
| PhasePoint = SiS_Pr->SiS_PALMPhase2; |
| } |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPALN) { |
| PhasePoint = SiS_Pr->SiS_PALNPhase; |
| if( (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && |
| ( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) || |
| (SiS_Pr->SiS_TVMode & TVSetTVSimuMode) ) ) { |
| PhasePoint = SiS_Pr->SiS_PALNPhase2; |
| } |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) { |
| PhasePoint = SiS_Pr->SiS_SpecialPhase; |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| PhasePoint = SiS_Pr->SiS_SpecialPhaseM; |
| } else if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) { |
| PhasePoint = SiS_Pr->SiS_SpecialPhaseJ; |
| } |
| } |
| |
| for(i=0x31, j=0; i<=0x34; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,PhasePoint[j]); |
| } |
| |
| for(i=0x01, j=0; i<=0x2D; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,TimingPoint[j]); |
| } |
| for(i=0x39; i<=0x45; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,TimingPoint[j]); |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(SiS_Pr->SiS_ModeType != ModeText) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x3A,0x1F); |
| } |
| } |
| |
| SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x0A,SiS_Pr->SiS_NewFlickerMode); |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x35,SiS_Pr->SiS_RY1COE); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x36,SiS_Pr->SiS_RY2COE); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x37,SiS_Pr->SiS_RY3COE); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x38,SiS_Pr->SiS_RY4COE); |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) tempax = 950; |
| else if(SiS_Pr->SiS_TVMode & TVSetPAL) tempax = 520; |
| else tempax = 440; /* NTSC, YPbPr 525, 750 */ |
| |
| if( ( (!(SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoHiVision)) && (SiS_Pr->SiS_VDE <= tempax) ) || |
| ( (SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoHiVision) && |
| ((SiS_Pr->SiS_VGAHDE == 1024) || (SiS_Pr->SiS_VDE <= tempax)) ) ) { |
| |
| tempax -= SiS_Pr->SiS_VDE; |
| tempax >>= 2; |
| tempax &= 0x00ff; |
| |
| temp = tempax + (USHORT)TimingPoint[0]; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp); |
| |
| temp = tempax + (USHORT)TimingPoint[1]; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,temp); |
| |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoYPbPrHiVision) && (SiS_Pr->SiS_VGAHDE >= 1024)) { |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x1b); /* 19 */ |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x54); /* 52 */ |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,0x17); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,0x1d); |
| } |
| } |
| |
| } |
| |
| tempcx = SiS_Pr->SiS_HT; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempcx >>= 1; |
| tempcx--; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) tempcx--; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1B,tempcx); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0xF0,((tempcx >> 8) & 0x0f)); |
| |
| tempcx = SiS_Pr->SiS_HT >> 1; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempcx >>= 1; |
| tempcx += 7; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) tempcx -= 4; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x22,0x0F,((tempcx << 4) & 0xf0)); |
| |
| tempbx = TimingPoint[j] | (TimingPoint[j+1] << 8); |
| tempbx += tempcx; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x24,tempbx); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x25,0x0F,((tempbx >> 4) & 0xf0)); |
| |
| tempbx += 8; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| tempbx -= 4; |
| tempcx = tempbx; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x29,0x0F,((tempbx << 4) & 0xf0)); |
| |
| j += 2; |
| tempcx += (TimingPoint[j] | (TimingPoint[j+1] << 8)); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x27,tempcx); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x28,0x0F,((tempcx >> 4) & 0xf0)); |
| |
| tempcx += 8; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) tempcx -= 4; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x2A,0x0F,((tempcx << 4) & 0xf0)); |
| |
| tempcx = SiS_Pr->SiS_HT >> 1; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempcx >>= 1; |
| j += 2; |
| tempcx -= (TimingPoint[j] | ((TimingPoint[j+1]) << 8)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x2D,0x0F,((tempcx << 4) & 0xf0)); |
| |
| tempcx -= 11; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) { |
| tempcx = SiS_GetVGAHT2(SiS_Pr) - 1; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x2E,tempcx); |
| |
| tempbx = SiS_Pr->SiS_VDE; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->SiS_VGAVDE == 360) tempbx = 746; |
| if(SiS_Pr->SiS_VGAVDE == 375) tempbx = 746; |
| if(SiS_Pr->SiS_VGAVDE == 405) tempbx = 853; |
| } else if( (SiS_Pr->SiS_VBInfo & SetCRT2ToTV) && |
| (!(SiS_Pr->SiS_TVMode & (TVSetYPbPr525p|TVSetYPbPr750p))) ) { |
| tempbx >>= 1; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| if((ModeNo <= 0x13) && (crt2crtc == 1)) tempbx++; |
| } else if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(SiS_Pr->SiS_ModeType <= ModeVGA) { |
| if(crt2crtc == 4) tempbx++; |
| } |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if((ModeNo == 0x2f) || (ModeNo == 0x5d) || (ModeNo == 0x5e)) tempbx++; |
| } |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { |
| if(ModeNo == 0x03) tempbx++; /* From 1.10.7w - doesn't make sense */ |
| } |
| } |
| } |
| tempbx -= 2; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x2F,tempbx); |
| |
| temp = (tempcx >> 8) & 0x0F; |
| temp |= ((tempbx >> 2) & 0xC0); |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)) { |
| temp |= 0x10; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToAVIDEO) temp |= 0x20; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x30,temp); |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x10,0xdf,((tempbx & 0x0400) >> 5)); |
| } |
| |
| #if 0 |
| /* TEST qqqq */ |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| for(i=0x01, j=0; i<=0x2D; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,TimingPoint[j]); |
| } |
| for(i=0x39; i<=0x45; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,TimingPoint[j]); |
| } |
| } |
| #endif |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| tempbx = SiS_Pr->SiS_VDE; |
| if( (SiS_Pr->SiS_VBInfo & SetCRT2ToTV) && |
| (!(SiS_Pr->SiS_TVMode & (TVSetYPbPr525p | TVSetYPbPr750p))) ) { |
| tempbx >>= 1; |
| } |
| tempbx -= 3; |
| temp = ((tempbx >> 3) & 0x60) | 0x18; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x46,temp); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x47,tempbx); |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x10,0xbf,((tempbx & 0x0400) >> 4)); |
| } |
| } |
| |
| tempbx = 0; |
| if(!(modeflag & HalfDCLK)) { |
| if(SiS_Pr->SiS_VGAHDE >= SiS_Pr->SiS_HDE) { |
| tempax = 0; |
| tempbx |= 0x20; |
| } |
| } |
| |
| tempch = tempcl = 0x01; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(SiS_Pr->SiS_VGAHDE >= 1024) { |
| if((!(modeflag & HalfDCLK)) || (HwInfo->jChipType < SIS_315H)) { |
| tempch = 0x19; |
| tempcl = 0x20; |
| if(SiS_Pr->SiS_VGAHDE >= 1280) { |
| tempch = 0x14; |
| tempbx &= ~0x20; |
| } |
| } |
| } |
| } |
| |
| if(!(tempbx & 0x20)) { |
| if(modeflag & HalfDCLK) tempcl <<= 1; |
| longtemp = ((SiS_Pr->SiS_VGAHDE * tempch) / tempcl) << 13; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) longtemp <<= 3; |
| tempax = longtemp / SiS_Pr->SiS_HDE; |
| if(longtemp % SiS_Pr->SiS_HDE) tempax++; |
| tempbx |= ((tempax >> 8) & 0x1F); |
| tempcx = tempax >> 13; |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x44,tempax); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x45,0xC0,tempbx); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| |
| tempcx &= 0x07; |
| if(tempbx & 0x20) tempcx = 0; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x46,0xF8,tempcx); |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| tempbx = 0x0382; |
| tempcx = 0x007e; |
| } else { |
| tempbx = 0x0369; |
| tempcx = 0x0061; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x4B,tempbx); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x4C,tempcx); |
| temp = (tempcx & 0x0300) >> 6; |
| temp |= ((tempbx >> 8) & 0x03); |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| temp |= 0x10; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) temp |= 0x20; |
| else if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) temp |= 0x40; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x4D,temp); |
| |
| temp = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x43); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x43,(temp - 3)); |
| |
| SiS_SetTVSpecial(SiS_Pr, ModeNo); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301C) { |
| temp = 0; |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) temp = 8; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x4e,0xf7,temp); |
| } |
| |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| if(!(SiS_Pr->SiS_TVMode & TVSetNTSC1024)) { |
| temp = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x01); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,(temp - 1)); |
| } |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x00,0xEF); |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x0B,0x00); |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) return; |
| |
| /* From here: Part2 LCD setup */ |
| |
| tempbx = SiS_Pr->SiS_HDE; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempbx >>= 1; |
| tempbx--; /* RHACTE = HDE - 1 */ |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x2C,tempbx); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x2B,0x0F,((tempbx >> 4) & 0xf0)); |
| |
| temp = 0x01; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| if(SiS_Pr->SiS_ModeType == ModeEGA) { |
| if(SiS_Pr->SiS_VGAHDE >= 1024) { |
| temp = 0x02; |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) { |
| temp = 0x01; |
| } |
| } |
| } |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x0B,temp); |
| |
| tempbx = SiS_Pr->SiS_VDE - 1; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x03,tempbx); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x0C,0xF8,((tempbx >> 8) & 0x07)); |
| |
| tempcx = SiS_Pr->SiS_VT - 1; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x19,tempcx); |
| temp = (tempcx >> 3) & 0xE0; |
| if(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit) { |
| /* Enable dithering; only do this for 32bpp mode */ |
| if(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x01) { |
| temp |= 0x10; |
| } |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1A,0x0f,temp); |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x09,0xF0); |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x0A,0xF0); |
| |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x17,0xFB); |
| SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x18,0xDF); |
| |
| #ifdef SIS315H |
| if(SiS_GetCRT2Part2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, |
| &CRT2Index, &resindex, HwInfo)) { |
| switch(CRT2Index) { |
| case 200: CRT2Part2Ptr = SiS_Pr->SiS_CRT2Part2_1024x768_1; break; |
| case 206: CRT2Part2Ptr = SiS310_CRT2Part2_Asus1024x768_3; break; |
| default: CRT2Part2Ptr = SiS_Pr->SiS_CRT2Part2_1024x768_3; break; |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x01,0x80,(CRT2Part2Ptr+resindex)->CR[0]); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x02,0x80,(CRT2Part2Ptr+resindex)->CR[1]); |
| for(i = 2, j = 0x04; j <= 0x06; i++, j++ ) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,j,(CRT2Part2Ptr+resindex)->CR[i]); |
| } |
| for(j = 0x1c; j <= 0x1d; i++, j++ ) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,j,(CRT2Part2Ptr+resindex)->CR[i]); |
| } |
| for(j = 0x1f; j <= 0x21; i++, j++ ) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,j,(CRT2Part2Ptr+resindex)->CR[i]); |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,(CRT2Part2Ptr+resindex)->CR[10]); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x25,0x0f,(CRT2Part2Ptr+resindex)->CR[11]); |
| |
| SiS_SetGroup2_Tail(SiS_Pr, ModeNo); |
| |
| |
| } else { |
| #endif |
| |
| /* Checked for 1024x768, 1280x1024, 1400x1050, 1600x1200 */ |
| /* Clevo dual-link 1024x768 */ |
| /* Compaq 1280x1024 has HT 1696 sometimes (calculation OK, if given HT is correct) */ |
| /* Acer: OK, but uses different setting for VESA timing at 640/800/1024 and 640x400 */ |
| |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if((SiS_Pr->SiS_LCDInfo & LCDPass11) || (SiS_Pr->PanelYRes == SiS_Pr->SiS_VDE)) { |
| tempbx = SiS_Pr->SiS_VDE - 1; |
| tempcx = SiS_Pr->SiS_VT - 1; |
| } else { |
| tempbx = SiS_Pr->SiS_VDE + ((SiS_Pr->PanelYRes - SiS_Pr->SiS_VDE) / 2); |
| tempcx = SiS_Pr->SiS_VT - ((SiS_Pr->PanelYRes - SiS_Pr->SiS_VDE) / 2); |
| } |
| } else { |
| tempbx = SiS_Pr->PanelYRes; |
| tempcx = SiS_Pr->SiS_VT; |
| tempax = 1; |
| if(SiS_Pr->PanelYRes != SiS_Pr->SiS_VDE) { |
| tempax = SiS_Pr->PanelYRes; |
| /* if(SiS_Pr->SiS_VGAVDE == 525) tempax += 0x3c; */ /* 651+301C */ |
| if(SiS_Pr->PanelYRes < SiS_Pr->SiS_VDE) { |
| tempax = tempcx = 0; |
| } else { |
| tempax -= SiS_Pr->SiS_VDE; |
| } |
| tempax >>= 1; |
| } |
| tempcx -= tempax; /* lcdvdes */ |
| tempbx -= tempax; /* lcdvdee */ |
| } |
| |
| /* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */ |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx); |
| #endif |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx); /* lcdvdes */ |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx); /* lcdvdee */ |
| |
| temp = (tempbx >> 5) & 0x38; |
| temp |= ((tempcx >> 8) & 0x07); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x02,temp); |
| |
| tempax = SiS_Pr->SiS_VDE; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| tempax = SiS_Pr->PanelYRes; |
| } |
| tempcx = (SiS_Pr->SiS_VT - tempax) >> 4; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| if(SiS_Pr->PanelYRes != SiS_Pr->SiS_VDE) { |
| tempcx = (SiS_Pr->SiS_VT - tempax) / 10; |
| } |
| } |
| |
| tempbx = ((SiS_Pr->SiS_VT + SiS_Pr->SiS_VDE) >> 1) - 1; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if(SiS_Pr->PanelYRes != SiS_Pr->SiS_VDE) { |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { /* ? */ |
| tempax = SiS_Pr->SiS_VT - SiS_Pr->PanelYRes; |
| if(tempax % 4) { tempax >>= 2; tempax++; } |
| else { tempax >>= 2; } |
| tempbx -= (tempax - 1); |
| } else { |
| tempbx -= 10; |
| if(tempbx <= SiS_Pr->SiS_VDE) tempbx = SiS_Pr->SiS_VDE + 1; |
| } |
| } |
| } |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| tempbx++; |
| if((!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) || (crt2crtc == 6)) { |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) { |
| tempbx = 770; |
| tempcx = 3; |
| } |
| } |
| } |
| |
| /* non-expanding: lcdvrs = ((VT + VDE) / 2) - 10 */ |
| |
| if(SiS_Pr->UseCustomMode) { |
| tempbx = SiS_Pr->CVSyncStart; |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx); |
| #endif |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx); /* lcdvrs */ |
| |
| temp = (tempbx >> 4) & 0xF0; |
| tempbx += (tempcx + 1); |
| temp |= (tempbx & 0x0F); |
| |
| if(SiS_Pr->UseCustomMode) { |
| temp &= 0xf0; |
| temp |= (SiS_Pr->CVSyncEnd & 0x0f); |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f)); |
| #endif |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp); |
| |
| #ifdef SIS300 |
| SiS_Group2LCDSpecial(SiS_Pr, HwInfo, ModeNo, crt2crtc); |
| #endif |
| |
| bridgeoffset = 7; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) bridgeoffset += 2; |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302ELV)) bridgeoffset++; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) bridgeoffset++; |
| |
| temp = 0; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| if(SiS_Pr->PanelXRes != SiS_Pr->SiS_HDE) { |
| temp = SiS_Pr->SiS_HT - ((SiS_Pr->PanelXRes - SiS_Pr->SiS_HDE) / 2); |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) temp >>= 1; |
| } |
| } |
| temp += bridgeoffset; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1F,temp); /* lcdhdes */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x20,0x0F,((temp >> 4) & 0xf0)); |
| |
| tempcx = SiS_Pr->SiS_HT; |
| tempax = tempbx = SiS_Pr->SiS_HDE; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| if(SiS_Pr->PanelXRes != SiS_Pr->SiS_HDE) { |
| tempax = SiS_Pr->PanelXRes; |
| tempbx = SiS_Pr->PanelXRes - ((SiS_Pr->PanelXRes - SiS_Pr->SiS_HDE) / 2); |
| } |
| } |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) { |
| tempcx >>= 1; |
| tempbx >>= 1; |
| tempax >>= 1; |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx); |
| #endif |
| |
| tempbx += bridgeoffset; |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx); /* lcdhdee */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x25,0xF0,((tempbx >> 8) & 0x0f)); |
| |
| tempcx = (tempcx - tempax) >> 2; |
| |
| tempbx += tempcx; |
| push2 = tempbx; |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { |
| if(SiS_Pr->SiS_LCDInfo & LCDPass11) { |
| if(SiS_Pr->SiS_HDE == 1280) tempbx = (tempbx & 0xff00) | 0x47; |
| } |
| } |
| } |
| |
| if(SiS_Pr->UseCustomMode) { |
| tempbx = SiS_Pr->CHSyncStart; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempbx >>= 1; |
| tempbx += bridgeoffset; |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx); |
| #endif |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx); /* lcdhrs */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0)); |
| |
| tempbx = push2; |
| |
| tempcx <<= 1; |
| if((SiS_Pr->SiS_LCDInfo & DontExpandLCD) && (!(SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| if(SiS_Pr->PanelXRes != SiS_Pr->SiS_HDE) tempcx >>= 2; |
| } |
| tempbx += tempcx; |
| |
| if(SiS_Pr->UseCustomMode) { |
| tempbx = SiS_Pr->CHSyncEnd; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempbx >>= 1; |
| tempbx += bridgeoffset; |
| } |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx); |
| #endif |
| |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx); /* lcdhre */ |
| |
| SiS_SetGroup2_Tail(SiS_Pr, ModeNo); |
| |
| #ifdef SIS300 |
| SiS_Set300Part2Regs(SiS_Pr, HwInfo, ModeIdIndex, RefreshRateTableIndex, ModeNo); |
| #endif |
| #ifdef SIS315H |
| } /* CRT2-LCD from table */ |
| #endif |
| } |
| |
| /*********************************************/ |
| /* SET PART 3 REGISTER GROUP */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetGroup3(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT i; |
| const UCHAR *tempdi; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) return; |
| |
| #ifndef SIS_CP |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x00,0x00); |
| #else |
| SIS_CP_INIT301_CP |
| #endif |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x13,0xFA); |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x14,0xC8); |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x13,0xF5); |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x14,0xB7); |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x13,0xFA); |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x14,0xC8); |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x3D,0xA8); |
| } |
| |
| tempdi = NULL; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| tempdi = SiS_Pr->SiS_HiTVGroup3Data; |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) { |
| tempdi = SiS_Pr->SiS_HiTVGroup3Simu; |
| } |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) { |
| if(!(SiS_Pr->SiS_TVMode & TVSetYPbPr525i)) { |
| tempdi = SiS_HiTVGroup3_1; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) tempdi = SiS_HiTVGroup3_2; |
| } |
| } |
| if(tempdi) { |
| for(i=0; i<=0x3E; i++) { |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,i,tempdi[i]); |
| } |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302ELV)) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) { |
| SiS_SetReg(SiS_Pr->SiS_Part3Port,0x28,0x3f); |
| } |
| } |
| } |
| |
| #ifdef SIS_CP |
| SIS_CP_INIT301_CP2 |
| #endif |
| } |
| |
| /*********************************************/ |
| /* SET PART 4 REGISTER GROUP */ |
| /*********************************************/ |
| |
| #ifdef SIS315H |
| static void |
| SiS_ShiftXPos(SiS_Private *SiS_Pr, int shift) |
| { |
| USHORT temp, temp1, temp2; |
| |
| temp1 = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x1f); |
| temp2 = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x20); |
| temp = (USHORT)((int)((temp1 | ((temp2 & 0xf0) << 4))) + shift); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1f,temp); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x20,0x0f,((temp >> 4) & 0xf0)); |
| temp = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x2b) & 0x0f; |
| temp = (USHORT)((int)(temp) + shift); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x2b,0xf0,(temp & 0x0f)); |
| temp1 = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x43); |
| temp2 = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x42); |
| temp = (USHORT)((int)((temp1 | ((temp2 & 0xf0) << 4))) + shift); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x43,temp); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x42,0x0f,((temp >> 4) & 0xf0)); |
| } |
| |
| static void |
| SiS_SetGroup4_C_ELV(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo, USHORT ModeIdIndex) |
| { |
| USHORT temp, temp1, resinfo = 0; |
| |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301C)) return; |
| if(!(SiS_Pr->SiS_VBInfo & (SetCRT2ToHiVision | SetCRT2ToYPbPr525750))) return; |
| |
| if(ModeNo > 0x13) { |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| } |
| |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x3a,0x08); |
| temp = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x3a); |
| if(!(temp & 0x01)) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x3a,0xdf); |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x25,0xfc); |
| if((HwInfo->jChipType < SIS_661) && (!(SiS_Pr->SiS_ROMNew))) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x25,0xf8); |
| } |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x0f,0xfb); |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) temp = 0x0000; |
| else if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) temp = 0x0002; |
| else if(SiS_Pr->SiS_TVMode & TVSetHiVision) temp = 0x0400; |
| else temp = 0x0402; |
| if((HwInfo->jChipType >= SIS_661) || (SiS_Pr->SiS_ROMNew)) { |
| temp1 = 0; |
| if(SiS_Pr->SiS_TVMode & TVAspect43) temp1 = 4; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0f,0xfb,temp1); |
| if(SiS_Pr->SiS_TVMode & TVAspect43LB) temp |= 0x01; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x26,0x7c,(temp & 0xff)); |
| } else { |
| temp1 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x3b) & 0x03; |
| if(temp1 == 0x01) temp |= 0x01; |
| if(temp1 == 0x03) temp |= 0x04; /* ? why not 0x10? */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x26,0xf8,(temp & 0xff)); |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x3a,0xfb,(temp >> 8)); |
| if(ModeNo > 0x13) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x3b,0xfd); |
| } |
| |
| if(HwInfo->jChipType >= SIS_661) { /* ? */ |
| if(SiS_Pr->SiS_TVMode & TVAspect43) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) { |
| if(resinfo == SIS_RI_1024x768) { |
| SiS_ShiftXPos(SiS_Pr, 97); |
| } else { |
| SiS_ShiftXPos(SiS_Pr, 111); |
| } |
| } else if(SiS_Pr->SiS_TVMode & TVSetHiVision) { |
| SiS_ShiftXPos(SiS_Pr, 136); |
| } |
| } |
| } |
| } |
| } |
| #endif |
| |
| static void |
| SiS_SetCRT2VCLK(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT vclkindex; |
| USHORT temp, reg1, reg2; |
| |
| if(SiS_Pr->UseCustomMode) { |
| reg1 = SiS_Pr->CSR2B; |
| reg2 = SiS_Pr->CSR2C; |
| } else { |
| vclkindex = SiS_GetVCLK2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, |
| HwInfo); |
| reg1 = SiS_Pr->SiS_VBVCLKData[vclkindex].Part4_A; |
| reg2 = SiS_Pr->SiS_VBVCLKData[vclkindex].Part4_B; |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0a,0x57); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0b,0x46); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x1f,0xf6); |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0a,reg1); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0b,reg2); |
| } |
| } else { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0a,0x01); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0b,reg2); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x0a,reg1); |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x12,0x00); |
| temp = 0x08; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC) temp |= 0x20; |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x12,temp); |
| } |
| |
| static void |
| SiS_SetGroup4(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT tempax,tempcx,tempbx,modeflag,temp,resinfo; |
| ULONG tempebx,tempeax,templong; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| } else if(SiS_Pr->UseCustomMode) { |
| modeflag = SiS_Pr->CModeFlag; |
| resinfo = 0; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| } |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x24,0x0e); |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS301C | VB_SIS302LV)) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x10,0x9f); |
| } |
| } |
| |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x27,0x2c); |
| } else { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x27,~0x20); |
| } |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x2a,0x00); |
| #ifdef SET_EMI |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x30,0x0c); |
| #endif |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x34,0x10); |
| } |
| } |
| return; |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x13,SiS_Pr->SiS_RVBHCFACT); |
| |
| tempbx = SiS_Pr->SiS_RVBHCMAX; |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x14,tempbx); |
| |
| temp = (tempbx >> 1) & 0x80; |
| |
| tempcx = SiS_Pr->SiS_VGAHT - 1; |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x16,tempcx); |
| |
| temp |= ((tempcx >> 5) & 0x78); |
| |
| tempcx = SiS_Pr->SiS_VGAVT - 1; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) tempcx -= 5; |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x17,tempcx); |
| |
| temp |= ((tempcx >> 8) & 0x07); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x15,temp); |
| |
| tempbx = SiS_Pr->SiS_VGAHDE; |
| if(modeflag & HalfDCLK) tempbx >>= 1; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempbx >>= 1; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| temp = 0; |
| if(tempbx > 800) temp = 0x60; |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| temp = 0; |
| if(tempbx == 1024) temp = 0xA0; |
| else if(tempbx > 1024) temp = 0xC0; |
| } else if(SiS_Pr->SiS_TVMode & (TVSetYPbPr525p | TVSetYPbPr750p)) { |
| temp = 0; |
| if(tempbx >= 1280) temp = 0x40; |
| else if(tempbx >= 1024) temp = 0x20; |
| } else { |
| temp = 0x80; |
| if(tempbx >= 1024) temp = 0xA0; |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| if(SiS_Pr->SiS_LCDResInfo != Panel_1280x1024) temp |= 0x0A; |
| } |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0E,0x10,temp); |
| |
| tempeax = SiS_Pr->SiS_VGAVDE; |
| tempebx = SiS_Pr->SiS_VDE; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) { |
| if(!(temp & 0xE0)) tempebx >>=1; |
| } |
| |
| tempcx = SiS_Pr->SiS_RVBHRS; |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x18,tempcx); |
| tempcx >>= 8; |
| tempcx |= 0x40; |
| |
| if(tempeax <= tempebx) { |
| tempcx ^= 0x40; |
| } else { |
| tempeax -= tempebx; |
| } |
| |
| tempeax *= (256 * 1024); |
| templong = tempeax % tempebx; |
| tempeax /= tempebx; |
| if(templong) tempeax++; |
| |
| temp = (USHORT)(tempeax & 0x000000FF); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x1B,temp); |
| temp = (USHORT)((tempeax & 0x0000FF00) >> 8); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x1A,temp); |
| temp = (USHORT)((tempeax >> 12) & 0x70); /* sic! */ |
| temp |= (tempcx & 0x4F); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x19,temp); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x1C,0x28); |
| |
| /* Calc Linebuffer max address and set/clear decimode */ |
| tempbx = 0; |
| if(SiS_Pr->SiS_TVMode & (TVSetHiVision | TVSetYPbPr750p)) tempbx = 0x08; |
| tempax = SiS_Pr->SiS_VGAHDE; |
| if(modeflag & HalfDCLK) tempax >>= 1; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempax >>= 1; |
| if(tempax > 800) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| tempax -= 800; |
| } else { /* 651+301C: Only if TVNoHiviNoYPbPr */ |
| tempbx = 0x08; |
| if(tempax == 1024) tempax *= 25; |
| else tempax *= 20; |
| temp = tempax % 32; |
| tempax /= 32; |
| if(temp) tempax++; |
| tempax++; |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToTVNoYPbPrHiVision) || |
| (SiS_Pr->SiS_TVMode & TVSetYPbPr525i)) { |
| if(resinfo == SIS_RI_1024x768) { |
| /* Otherwise white line at right edge */ |
| tempax = (tempax & 0xff00) | 0x20; |
| } |
| } |
| } |
| } |
| tempax--; |
| temp = ((tempax >> 4) & 0x30) | tempbx; |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x1D,tempax); |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x1E,temp); |
| |
| temp = 0x0036; tempbx = 0xD0; |
| if((HwInfo->jChipType >= SIS_315H) && (SiS_Pr->SiS_VBType & VB_SIS301LV302LV)) { |
| temp = 0x0026; tempbx = 0xC0; /* See En/DisableBridge() */ |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| if(!(SiS_Pr->SiS_TVMode & (TVSetNTSC1024 | TVSetHiVision | TVSetYPbPr750p | TVSetYPbPr525p))) { |
| temp |= 0x01; |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| if(!(SiS_Pr->SiS_TVMode & TVSetTVSimuMode)) { |
| temp &= ~0x01; |
| } |
| } |
| } |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x1F,tempbx,temp); |
| |
| tempbx = SiS_Pr->SiS_HT >> 1; |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) tempbx >>= 1; |
| tempbx -= 2; |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x22,tempbx); |
| temp = (tempbx >> 5) & 0x38; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x21,0xC0,temp); |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x24,0x0e); |
| /* LCD-too-dark-error-source, see FinalizeLCD() */ |
| } |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_IsDualLink(SiS_Pr, HwInfo)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x27,0x2c); |
| } else { |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x27,~0x20); |
| } |
| } |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x2a,0x00); |
| #ifdef SET_EMI |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x30,0x0c); |
| #endif |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x34,0x10); |
| } |
| } |
| |
| } /* 301B */ |
| |
| SiS_SetCRT2VCLK(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| } |
| |
| /*********************************************/ |
| /* SET PART 5 REGISTER GROUP */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetGroup5(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) return; |
| |
| if(SiS_Pr->SiS_ModeType == ModeVGA) { |
| if(!(SiS_Pr->SiS_VBInfo & (SetInSlaveMode | LoadDACFlag))) { |
| SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); |
| SiS_LoadDAC(SiS_Pr, HwInfo, ModeNo, ModeIdIndex); |
| } |
| } |
| } |
| |
| /*********************************************/ |
| /* MODIFY CRT1 GROUP FOR SLAVE MODE */ |
| /*********************************************/ |
| |
| static void |
| SiS_ModCRT1CRTC(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| USHORT tempah,i,modeflag,j; |
| USHORT ResIndex,DisplayType; |
| const SiS_LVDSCRT1DataStruct *LVDSCRT1Ptr=NULL; |
| |
| if(ModeNo <= 0x13) modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| else modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| |
| if((SiS_Pr->SiS_CustomT == CUT_BARCO1366) || |
| (SiS_Pr->SiS_CustomT == CUT_BARCO1024) || |
| (SiS_Pr->SiS_CustomT == CUT_PANEL848)) |
| return; |
| |
| if(!(SiS_GetLVDSCRT1Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, |
| &ResIndex, &DisplayType))) { |
| return; |
| } |
| |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_SetFlag & SetDOSMode) return; |
| } |
| |
| switch(DisplayType) { |
| case 0 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1800x600_1; break; |
| case 1 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1800x600_1_H; break; |
| case 2 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1800x600_2; break; |
| case 3 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1800x600_2_H; break; |
| case 4 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x768_1; break; |
| case 5 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x768_1_H; break; |
| case 6 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x768_2; break; |
| case 7 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x768_2_H; break; |
| case 8 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x1024_1; break; |
| case 9 : LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x1024_1_H; break; |
| case 10: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x1024_2; break; |
| case 11: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x1024_2_H; break; |
| case 12: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1XXXxXXX_1; break; |
| case 13: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1XXXxXXX_1_H; break; |
| case 14: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11400x1050_1; break; |
| case 15: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11400x1050_1_H; break; |
| case 16: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11400x1050_2; break; |
| case 17: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11400x1050_2_H; break; |
| case 18: LVDSCRT1Ptr = SiS_Pr->SiS_CHTVCRT1UNTSC; break; |
| case 19: LVDSCRT1Ptr = SiS_Pr->SiS_CHTVCRT1ONTSC; break; |
| case 20: LVDSCRT1Ptr = SiS_Pr->SiS_CHTVCRT1UPAL; break; |
| case 21: LVDSCRT1Ptr = SiS_Pr->SiS_CHTVCRT1OPAL; break; |
| case 22: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1320x480_1; break; /* FSTN */ |
| case 23: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x600_1; break; |
| case 24: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x600_1_H; break; |
| case 25: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x600_2; break; |
| case 26: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x600_2_H; break; |
| case 27: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11152x768_1; break; |
| case 28: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11152x768_1_H; break; |
| case 29: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11152x768_2; break; |
| case 30: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11152x768_2_H; break; |
| case 36: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11600x1200_1; break; |
| case 37: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11600x1200_1_H; break; |
| case 38: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11600x1200_2; break; |
| case 39: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11600x1200_2_H; break; |
| case 40: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x768_1; break; |
| case 41: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x768_1_H; break; |
| case 42: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x768_2; break; |
| case 43: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11280x768_2_H; break; |
| case 50: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1640x480_1; break; |
| case 51: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1640x480_1_H; break; |
| case 52: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1640x480_2; break; |
| case 53: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1640x480_2_H; break; |
| case 54: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1640x480_3; break; |
| case 55: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT1640x480_3_H; break; |
| case 99: LVDSCRT1Ptr = SiS_Pr->SiS_CHTVCRT1SOPAL; break; |
| default: LVDSCRT1Ptr = SiS_Pr->SiS_LVDSCRT11024x768_1; break; |
| } |
| |
| SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x11,0x7f); |
| |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[0]; |
| SiS_SetReg(SiS_Pr->SiS_P3d4,0x00,tempah); |
| |
| for(i=0x02,j=1;i<=0x05;i++,j++){ |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[j]; |
| SiS_SetReg(SiS_Pr->SiS_P3d4,i,tempah); |
| } |
| for(i=0x06,j=5;i<=0x07;i++,j++){ |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[j]; |
| SiS_SetReg(SiS_Pr->SiS_P3d4,i,tempah); |
| } |
| for(i=0x10,j=7;i<=0x11;i++,j++){ |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[j]; |
| SiS_SetReg(SiS_Pr->SiS_P3d4,i,tempah); |
| } |
| for(i=0x15,j=9;i<=0x16;i++,j++){ |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[j]; |
| SiS_SetReg(SiS_Pr->SiS_P3d4,i,tempah); |
| } |
| for(i=0x0A,j=11;i<=0x0C;i++,j++){ |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[j]; |
| SiS_SetReg(SiS_Pr->SiS_P3c4,i,tempah); |
| } |
| |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[14]; |
| tempah &= 0xE0; |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0x1f,tempah); |
| |
| tempah = (LVDSCRT1Ptr + ResIndex)->CR[14]; |
| tempah &= 0x01; |
| tempah <<= 5; |
| if(modeflag & DoubleScanMode) tempah |= 0x080; |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,~0x020,tempah); |
| } |
| |
| /*********************************************/ |
| /* SET CRT2 ECLK */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetCRT2ECLK(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT clkbase, vclkindex=0; |
| UCHAR sr2b, sr2c; |
| |
| if((SiS_Pr->SiS_LCDResInfo == Panel_640x480) || (SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2); |
| if((SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRTVCLK & 0x3f) == 2) { |
| RefreshRateTableIndex--; |
| } |
| vclkindex = SiS_GetVCLK2Ptr(SiS_Pr, ModeNo, ModeIdIndex, |
| RefreshRateTableIndex, HwInfo); |
| SiS_Pr->SiS_SetFlag |= ProgrammingCRT2; |
| } else { |
| vclkindex = SiS_GetVCLK2Ptr(SiS_Pr, ModeNo, ModeIdIndex, |
| RefreshRateTableIndex, HwInfo); |
| } |
| |
| sr2b = SiS_Pr->SiS_VCLKData[vclkindex].SR2B; |
| sr2c = SiS_Pr->SiS_VCLKData[vclkindex].SR2C; |
| |
| if((SiS_Pr->SiS_CustomT == CUT_BARCO1366) || (SiS_Pr->SiS_CustomT == CUT_BARCO1024)) { |
| if(SiS_Pr->SiS_UseROM) { |
| if(ROMAddr[0x220] & 0x01) { |
| sr2b = ROMAddr[0x227]; |
| sr2c = ROMAddr[0x228]; |
| } |
| } |
| } |
| |
| clkbase = 0x02B; |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) { |
| clkbase += 3; |
| } |
| } |
| |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x31,0x20); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,clkbase,sr2b); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,clkbase+1,sr2c); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x31,0x10); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,clkbase,sr2b); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,clkbase+1,sr2c); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x31,0x00); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,clkbase,sr2b); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,clkbase+1,sr2c); |
| } |
| |
| /*********************************************/ |
| /* SET UP CHRONTEL CHIPS */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetCHTVReg(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| USHORT RefreshRateTableIndex) |
| { |
| #if defined(SIS300) || defined(SIS315H) |
| USHORT temp, tempbx; |
| #endif |
| USHORT tempcl; |
| USHORT TVType, resindex; |
| const SiS_CHTVRegDataStruct *CHTVRegData = NULL; |
| |
| if(ModeNo <= 0x13) |
| tempcl = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| else |
| tempcl = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; |
| |
| TVType = 0; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) TVType += 1; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| TVType += 2; |
| if(SiS_Pr->SiS_ModeType > ModeVGA) { |
| if(SiS_Pr->SiS_CHSOverScan) TVType = 8; |
| } |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) { |
| TVType = 4; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) TVType += 1; |
| } else if(SiS_Pr->SiS_TVMode & TVSetPALN) { |
| TVType = 6; |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) TVType += 1; |
| } |
| } |
| switch(TVType) { |
| case 0: CHTVRegData = SiS_Pr->SiS_CHTVReg_UNTSC; break; |
| case 1: CHTVRegData = SiS_Pr->SiS_CHTVReg_ONTSC; break; |
| case 2: CHTVRegData = SiS_Pr->SiS_CHTVReg_UPAL; break; |
| case 3: CHTVRegData = SiS_Pr->SiS_CHTVReg_OPAL; break; |
| case 4: CHTVRegData = SiS_Pr->SiS_CHTVReg_UPALM; break; |
| case 5: CHTVRegData = SiS_Pr->SiS_CHTVReg_OPALM; break; |
| case 6: CHTVRegData = SiS_Pr->SiS_CHTVReg_UPALN; break; |
| case 7: CHTVRegData = SiS_Pr->SiS_CHTVReg_OPALN; break; |
| case 8: CHTVRegData = SiS_Pr->SiS_CHTVReg_SOPAL; break; |
| default: CHTVRegData = SiS_Pr->SiS_CHTVReg_OPAL; break; |
| } |
| resindex = tempcl & 0x3F; |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { |
| |
| #ifdef SIS300 |
| |
| /* Chrontel 7005 - I assume that it does not come with a 315 series chip */ |
| |
| /* We don't support modes >800x600 */ |
| if (resindex > 5) return; |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) { |
| SiS_SetCH700x(SiS_Pr,0x4304); /* 0x40=76uA (PAL); 0x03=15bit non-multi RGB*/ |
| SiS_SetCH700x(SiS_Pr,0x6909); /* Black level for PAL (105)*/ |
| } else { |
| SiS_SetCH700x(SiS_Pr,0x0304); /* upper nibble=71uA (NTSC), 0x03=15bit non-multi RGB*/ |
| SiS_SetCH700x(SiS_Pr,0x7109); /* Black level for NTSC (113)*/ |
| } |
| |
| temp = CHTVRegData[resindex].Reg[0]; |
| tempbx=((temp&0x00FF)<<8)|0x00; /* Mode register */ |
| SiS_SetCH700x(SiS_Pr,tempbx); |
| temp = CHTVRegData[resindex].Reg[1]; |
| tempbx=((temp&0x00FF)<<8)|0x07; /* Start active video register */ |
| SiS_SetCH700x(SiS_Pr,tempbx); |
| temp = CHTVRegData[resindex].Reg[2]; |
| tempbx=((temp&0x00FF)<<8)|0x08; /* Position overflow register */ |
| SiS_SetCH700x(SiS_Pr,tempbx); |
| temp = CHTVRegData[resindex].Reg[3]; |
| tempbx=((temp&0x00FF)<<8)|0x0A; /* Horiz Position register */ |
| SiS_SetCH700x(SiS_Pr,tempbx); |
| temp = CHTVRegData[resindex].Reg[4]; |
| tempbx=((temp&0x00FF)<<8)|0x0B; /* Vertical Position register */ |
| SiS_SetCH700x(SiS_Pr,tempbx); |
| |
| /* Set minimum flicker filter for Luma channel (SR1-0=00), |
| minimum text enhancement (S3-2=10), |
| maximum flicker filter for Chroma channel (S5-4=10) |
| =00101000=0x28 (When reading, S1-0->S3-2, and S3-2->S1-0!) |
| */ |
| SiS_SetCH700x(SiS_Pr,0x2801); |
| |
| /* Set video bandwidth |
| High bandwith Luma composite video filter(S0=1) |
| low bandwith Luma S-video filter (S2-1=00) |
| disable peak filter in S-video channel (S3=0) |
| high bandwidth Chroma Filter (S5-4=11) |
| =00110001=0x31 |
| */ |
| SiS_SetCH700x(SiS_Pr,0xb103); /* old: 3103 */ |
| |
| /* Register 0x3D does not exist in non-macrovision register map |
| (Maybe this is a macrovision register?) |
| */ |
| #ifndef SIS_CP |
| SiS_SetCH70xx(SiS_Pr,0x003D); |
| #endif |
| |
| /* Register 0x10 only contains 1 writable bit (S0) for sensing, |
| all other bits a read-only. Macrovision? |
| */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0010,0x1F); |
| |
| /* Register 0x11 only contains 3 writable bits (S0-S2) for |
| contrast enhancement (set to 010 -> gain 1 Yout = 17/16*(Yin-30) ) |
| */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0211,0xF8); |
| |
| /* Clear DSEN |
| */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001C,0xEF); |
| |
| if(!(SiS_Pr->SiS_TVMode & TVSetPAL)) { /* ---- NTSC ---- */ |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) { |
| if(resindex == 0x04) { /* 640x480 overscan: Mode 16 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0020,0xEF); /* loop filter off */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0121,0xFE); /* ACIV on, no need to set FSCI */ |
| } else if(resindex == 0x05) { /* 800x600 overscan: Mode 23 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0118,0xF0); /* 0x18-0x1f: FSCI 469,762,048 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0C19,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001A,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001B,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001C,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001D,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001E,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x001F,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0120,0xEF); /* Loop filter on for mode 23 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0021,0xFE); /* ACIV off, need to set FSCI */ |
| } |
| } else { |
| if(resindex == 0x04) { /* ----- 640x480 underscan; Mode 17 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0020,0xEF); /* loop filter off */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0121,0xFE); |
| } else if(resindex == 0x05) { /* ----- 800x600 underscan: Mode 24 */ |
| #if 0 |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0118,0xF0); /* (FSCI was 0x1f1c71c7 - this is for mode 22) */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0919,0xF0); /* FSCI for mode 24 is 428,554,851 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x081A,0xF0); /* 198b3a63 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0b1B,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x041C,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x011D,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x061E,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x051F,0xF0); |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0020,0xEF); /* loop filter off for mode 24 */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0021,0xFE); /* ACIV off, need to set FSCI */ |
| #endif /* All alternatives wrong (datasheet wrong?), don't use FSCI */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0020,0xEF); /* loop filter off */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0121,0xFE); |
| } |
| } |
| } else { /* ---- PAL ---- */ |
| /* We don't play around with FSCI in PAL mode */ |
| if(resindex == 0x04) { |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0020,0xEF); /* loop filter off */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0121,0xFE); /* ACIV on */ |
| } else { |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0020,0xEF); /* loop filter off */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x0121,0xFE); /* ACIV on */ |
| } |
| } |
| |
| #endif /* 300 */ |
| |
| } else { |
| |
| /* Chrontel 7019 - assumed that it does not come with a 300 series chip */ |
| |
| #ifdef SIS315H |
| |
| /* We don't support modes >1024x768 */ |
| if (resindex > 6) return; |
| |
| temp = CHTVRegData[resindex].Reg[0]; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) { |
| temp |= 0x10; |
| } |
| tempbx=((temp & 0x00FF) << 8) | 0x00; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[1]; |
| tempbx=((temp & 0x00FF) << 8) | 0x01; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[2]; |
| tempbx=((temp & 0x00FF) << 8) | 0x02; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[3]; |
| tempbx=((temp & 0x00FF) << 8) | 0x04; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[4]; |
| tempbx=((temp & 0x00FF) << 8) | 0x03; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[5]; |
| tempbx=((temp & 0x00FF) << 8) | 0x05; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[6]; |
| tempbx=((temp & 0x00FF) << 8) | 0x06; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[7]; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) { |
| temp = 0x66; |
| } |
| tempbx=((temp & 0x00FF) << 8) | 0x07; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[8]; |
| tempbx=((temp & 0x00FF) << 8) | 0x08; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[9]; |
| tempbx=((temp & 0x00FF) << 8) | 0x15; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[10]; |
| tempbx=((temp & 0x00FF) << 8) | 0x1f; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[11]; |
| tempbx=((temp & 0x00FF) << 8) | 0x0c; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[12]; |
| tempbx=((temp & 0x00FF) << 8) | 0x0d; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[13]; |
| tempbx=((temp & 0x00FF) << 8) | 0x0e; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[14]; |
| tempbx=((temp & 0x00FF) << 8) | 0x0f; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = CHTVRegData[resindex].Reg[15]; |
| tempbx=((temp & 0x00FF) << 8) | 0x10; |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x21) & ~0x02; |
| /* D1 should be set for PAL, PAL-N and NTSC-J, |
| but I won't do that for PAL unless somebody |
| tells me to do so. Since the BIOS uses |
| non-default CIV values and blacklevels, |
| this might be compensated anyway. |
| */ |
| if(SiS_Pr->SiS_TVMode & (TVSetPALN | TVSetNTSCJ)) temp |= 0x02; |
| SiS_SetCH701x(SiS_Pr,((temp << 8) | 0x21)); |
| |
| #endif /* 315 */ |
| |
| } |
| |
| #ifdef SIS_CP |
| SIS_CP_INIT301_CP3 |
| #endif |
| |
| } |
| |
| void |
| SiS_Chrontel701xBLOn(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp; |
| |
| /* Enable Chrontel 7019 LCD panel backlight */ |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(HwInfo->jChipType == SIS_740) { |
| SiS_SetCH701x(SiS_Pr,0x6566); |
| } else { |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| temp |= 0x20; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x66); |
| } |
| } |
| } |
| |
| void |
| SiS_Chrontel701xBLOff(SiS_Private *SiS_Pr) |
| { |
| USHORT temp; |
| |
| /* Disable Chrontel 7019 LCD panel backlight */ |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| temp &= 0xDF; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x66); |
| } |
| } |
| |
| #ifdef SIS315H /* ----------- 315 series only ---------- */ |
| |
| static void |
| SiS_ChrontelPowerSequencing(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR regtable[] = { 0x67, 0x68, 0x69, 0x6a, 0x6b }; |
| UCHAR table1024_740[] = { 0x01, 0x02, 0x01, 0x01, 0x01 }; |
| UCHAR table1400_740[] = { 0x01, 0x6e, 0x01, 0x01, 0x01 }; |
| UCHAR asus1024_740[] = { 0x19, 0x6e, 0x01, 0x19, 0x09 }; |
| UCHAR asus1400_740[] = { 0x19, 0x6e, 0x01, 0x19, 0x09 }; |
| UCHAR table1024_650[] = { 0x01, 0x02, 0x01, 0x01, 0x02 }; |
| UCHAR table1400_650[] = { 0x01, 0x02, 0x01, 0x01, 0x02 }; |
| UCHAR *tableptr = NULL; |
| int i; |
| |
| /* Set up Power up/down timing */ |
| |
| if(HwInfo->jChipType == SIS_740) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(SiS_Pr->SiS_CustomT == CUT_ASUSL3000D) tableptr = asus1024_740; |
| else tableptr = table1024_740; |
| } else if((SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1600x1200)) { |
| if(SiS_Pr->SiS_CustomT == CUT_ASUSL3000D) tableptr = asus1400_740; |
| else tableptr = table1400_740; |
| } else return; |
| } else { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| tableptr = table1024_650; |
| } else if((SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) || |
| (SiS_Pr->SiS_LCDResInfo == Panel_1600x1200)) { |
| tableptr = table1400_650; |
| } else return; |
| } |
| |
| for(i=0; i<5; i++) { |
| SiS_SetCH701x(SiS_Pr,(tableptr[i] << 8) | regtable[i]); |
| } |
| } |
| |
| static void |
| SiS_SetCH701xForLCD(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR regtable[] = { 0x1c, 0x5f, 0x64, 0x6f, 0x70, 0x71, |
| 0x72, 0x73, 0x74, 0x76, 0x78, 0x7d, 0x66 }; |
| UCHAR table1024_740[] = { 0x60, 0x02, 0x00, 0x07, 0x40, 0xed, |
| 0xa3, 0xc8, 0xc7, 0xac, 0xe0, 0x02, 0x44 }; |
| UCHAR table1280_740[] = { 0x60, 0x03, 0x11, 0x00, 0x40, 0xe3, |
| 0xad, 0xdb, 0xf6, 0xac, 0xe0, 0x02, 0x44 }; |
| UCHAR table1400_740[] = { 0x60, 0x03, 0x11, 0x00, 0x40, 0xe3, |
| 0xad, 0xdb, 0xf6, 0xac, 0xe0, 0x02, 0x44 }; |
| UCHAR table1600_740[] = { 0x60, 0x04, 0x11, 0x00, 0x40, 0xe3, |
| 0xad, 0xde, 0xf6, 0xac, 0x60, 0x1a, 0x44 }; |
| UCHAR table1024_650[] = { 0x60, 0x02, 0x00, 0x07, 0x40, 0xed, |
| 0xa3, 0xc8, 0xc7, 0xac, 0x60, 0x02 }; |
| UCHAR table1280_650[] = { 0x60, 0x03, 0x11, 0x00, 0x40, 0xe3, |
| 0xad, 0xdb, 0xf6, 0xac, 0xe0, 0x02 }; |
| UCHAR table1400_650[] = { 0x60, 0x03, 0x11, 0x00, 0x40, 0xef, |
| 0xad, 0xdb, 0xf6, 0xac, 0x60, 0x02 }; |
| UCHAR table1600_650[] = { 0x60, 0x04, 0x11, 0x00, 0x40, 0xe3, |
| 0xad, 0xde, 0xf6, 0xac, 0x60, 0x1a }; |
| UCHAR *tableptr = NULL; |
| USHORT tempbh; |
| int i; |
| |
| if(HwInfo->jChipType == SIS_740) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) tableptr = table1024_740; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) tableptr = table1280_740; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) tableptr = table1400_740; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) tableptr = table1600_740; |
| else return; |
| } else { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) tableptr = table1024_650; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) tableptr = table1280_650; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) tableptr = table1400_650; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) tableptr = table1600_650; |
| else return; |
| } |
| |
| tempbh = SiS_GetCH701x(SiS_Pr,0x74); |
| if((tempbh == 0xf6) || (tempbh == 0xc7)) { |
| tempbh = SiS_GetCH701x(SiS_Pr,0x73); |
| if(tempbh == 0xc8) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) return; |
| } else if(tempbh == 0xdb) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) return; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) return; |
| } else if(tempbh == 0xde) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) return; |
| } |
| } |
| |
| if(HwInfo->jChipType == SIS_740) tempbh = 0x0d; |
| else tempbh = 0x0c; |
| |
| for(i = 0; i < tempbh; i++) { |
| SiS_SetCH701x(SiS_Pr,(tableptr[i] << 8) | regtable[i]); |
| } |
| SiS_ChrontelPowerSequencing(SiS_Pr,HwInfo); |
| tempbh = SiS_GetCH701x(SiS_Pr,0x1e); |
| tempbh |= 0xc0; |
| SiS_SetCH701x(SiS_Pr,(tempbh << 8) | 0x1e); |
| |
| if(HwInfo->jChipType == SIS_740) { |
| tempbh = SiS_GetCH701x(SiS_Pr,0x1c); |
| tempbh &= 0xfb; |
| SiS_SetCH701x(SiS_Pr,(tempbh << 8) | 0x1c); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2d,0x03); |
| tempbh = SiS_GetCH701x(SiS_Pr,0x64); |
| tempbh |= 0x40; |
| SiS_SetCH701x(SiS_Pr,(tempbh << 8) | 0x64); |
| tempbh = SiS_GetCH701x(SiS_Pr,0x03); |
| tempbh &= 0x3f; |
| SiS_SetCH701x(SiS_Pr,(tempbh << 8) | 0x03); |
| } |
| } |
| |
| static void |
| SiS_ChrontelResetVSync(SiS_Private *SiS_Pr) |
| { |
| unsigned char temp, temp1; |
| |
| temp1 = SiS_GetCH701x(SiS_Pr,0x49); |
| SiS_SetCH701x(SiS_Pr,0x3e49); |
| temp = SiS_GetCH701x(SiS_Pr,0x47); |
| temp &= 0x7f; /* Use external VSYNC */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x47); |
| SiS_LongDelay(SiS_Pr,3); |
| temp = SiS_GetCH701x(SiS_Pr,0x47); |
| temp |= 0x80; /* Use internal VSYNC */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x47); |
| SiS_SetCH701x(SiS_Pr,(temp1 << 8) | 0x49); |
| } |
| |
| static void |
| SiS_Chrontel701xOn(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp; |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(HwInfo->jChipType == SIS_740) { |
| temp = SiS_GetCH701x(SiS_Pr,0x1c); |
| temp |= 0x04; /* Invert XCLK phase */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x1c); |
| } |
| if(SiS_IsYPbPr(SiS_Pr, HwInfo)) { |
| temp = SiS_GetCH701x(SiS_Pr,0x01); |
| temp &= 0x3f; |
| temp |= 0x80; /* Enable YPrPb (HDTV) */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x01); |
| } |
| if(SiS_IsChScart(SiS_Pr, HwInfo)) { |
| temp = SiS_GetCH701x(SiS_Pr,0x01); |
| temp &= 0x3f; |
| temp |= 0xc0; /* Enable SCART + CVBS */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x01); |
| } |
| if(HwInfo->jChipType == SIS_740) { |
| SiS_ChrontelResetVSync(SiS_Pr); |
| SiS_SetCH701x(SiS_Pr,0x2049); /* Enable TV path */ |
| } else { |
| SiS_SetCH701x(SiS_Pr,0x2049); /* Enable TV path */ |
| temp = SiS_GetCH701x(SiS_Pr,0x49); |
| if(SiS_IsYPbPr(SiS_Pr,HwInfo)) { |
| temp = SiS_GetCH701x(SiS_Pr,0x73); |
| temp |= 0x60; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x73); |
| } |
| temp = SiS_GetCH701x(SiS_Pr,0x47); |
| temp &= 0x7f; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x47); |
| SiS_LongDelay(SiS_Pr,2); |
| temp = SiS_GetCH701x(SiS_Pr,0x47); |
| temp |= 0x80; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x47); |
| } |
| } |
| } |
| |
| static void |
| SiS_Chrontel701xOff(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp; |
| |
| /* Complete power down of LVDS */ |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| if(HwInfo->jChipType == SIS_740) { |
| SiS_LongDelay(SiS_Pr,1); |
| SiS_GenericDelay(SiS_Pr,0x16ff); |
| SiS_SetCH701x(SiS_Pr,0xac76); |
| SiS_SetCH701x(SiS_Pr,0x0066); |
| } else { |
| SiS_LongDelay(SiS_Pr,2); |
| temp = SiS_GetCH701x(SiS_Pr,0x76); |
| temp &= 0xfc; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x76); |
| SiS_SetCH701x(SiS_Pr,0x0066); |
| } |
| } |
| } |
| |
| static void |
| SiS_ChrontelResetDB(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp; |
| |
| if(HwInfo->jChipType == SIS_740) { |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x4a); /* Version ID */ |
| temp &= 0x01; |
| if(!temp) { |
| |
| if(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo)) { |
| temp = SiS_GetCH701x(SiS_Pr,0x49); |
| SiS_SetCH701x(SiS_Pr,0x3e49); |
| } |
| /* Reset Chrontel 7019 datapath */ |
| SiS_SetCH701x(SiS_Pr,0x1048); |
| SiS_LongDelay(SiS_Pr,1); |
| SiS_SetCH701x(SiS_Pr,0x1848); |
| |
| if(SiS_WeHaveBacklightCtrl(SiS_Pr, HwInfo)) { |
| SiS_ChrontelResetVSync(SiS_Pr); |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x49); |
| } |
| |
| } else { |
| |
| /* Clear/set/clear GPIO */ |
| temp = SiS_GetCH701x(SiS_Pr,0x5c); |
| temp &= 0xef; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x5c); |
| temp = SiS_GetCH701x(SiS_Pr,0x5c); |
| temp |= 0x10; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x5c); |
| temp = SiS_GetCH701x(SiS_Pr,0x5c); |
| temp &= 0xef; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x5c); |
| temp = SiS_GetCH701x(SiS_Pr,0x61); |
| if(!temp) { |
| SiS_SetCH701xForLCD(SiS_Pr, HwInfo); |
| } |
| } |
| |
| } else { /* 650 */ |
| /* Reset Chrontel 7019 datapath */ |
| SiS_SetCH701x(SiS_Pr,0x1048); |
| SiS_LongDelay(SiS_Pr,1); |
| SiS_SetCH701x(SiS_Pr,0x1848); |
| } |
| } |
| |
| static void |
| SiS_ChrontelInitTVVSync(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp; |
| |
| if(HwInfo->jChipType == SIS_740) { |
| |
| if(SiS_WeHaveBacklightCtrl(SiS_Pr,HwInfo)) { |
| SiS_ChrontelResetVSync(SiS_Pr); |
| } |
| |
| } else { |
| |
| SiS_SetCH701x(SiS_Pr,0xaf76); /* Power up LVDS block */ |
| temp = SiS_GetCH701x(SiS_Pr,0x49); |
| temp &= 1; |
| if(temp != 1) { /* TV block powered? (0 = yes, 1 = no) */ |
| temp = SiS_GetCH701x(SiS_Pr,0x47); |
| temp &= 0x70; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x47); /* enable VSYNC */ |
| SiS_LongDelay(SiS_Pr,3); |
| temp = SiS_GetCH701x(SiS_Pr,0x47); |
| temp |= 0x80; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x47); /* disable VSYNC */ |
| } |
| |
| } |
| } |
| |
| static void |
| SiS_ChrontelDoSomething3(SiS_Private *SiS_Pr, USHORT ModeNo, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp,temp1; |
| |
| if(HwInfo->jChipType == SIS_740) { |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x61); |
| if(temp < 1) { |
| temp++; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x61); |
| } |
| SiS_SetCH701x(SiS_Pr,0x4566); /* Panel power on */ |
| SiS_SetCH701x(SiS_Pr,0xaf76); /* All power on */ |
| SiS_LongDelay(SiS_Pr,1); |
| SiS_GenericDelay(SiS_Pr,0x16ff); |
| |
| } else { /* 650 */ |
| |
| temp1 = 0; |
| temp = SiS_GetCH701x(SiS_Pr,0x61); |
| if(temp < 2) { |
| temp++; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x61); |
| temp1 = 1; |
| } |
| SiS_SetCH701x(SiS_Pr,0xac76); |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| temp |= 0x5f; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x66); |
| if(ModeNo > 0x13) { |
| if(SiS_WeHaveBacklightCtrl(SiS_Pr, HwInfo)) { |
| SiS_GenericDelay(SiS_Pr,0x3ff); |
| } else { |
| SiS_GenericDelay(SiS_Pr,0x2ff); |
| } |
| } else { |
| if(!temp1) |
| SiS_GenericDelay(SiS_Pr,0x2ff); |
| } |
| temp = SiS_GetCH701x(SiS_Pr,0x76); |
| temp |= 0x03; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x76); |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| temp &= 0x7f; |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x66); |
| SiS_LongDelay(SiS_Pr,1); |
| |
| } |
| } |
| |
| static void |
| SiS_ChrontelDoSomething2(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp,tempcl,tempch; |
| |
| SiS_LongDelay(SiS_Pr, 1); |
| tempcl = 3; |
| tempch = 0; |
| |
| do { |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| temp &= 0x04; /* PLL stable? -> bail out */ |
| if(temp == 0x04) break; |
| |
| if(HwInfo->jChipType == SIS_740) { |
| /* Power down LVDS output, PLL normal operation */ |
| SiS_SetCH701x(SiS_Pr,0xac76); |
| } |
| |
| SiS_SetCH701xForLCD(SiS_Pr,HwInfo); |
| |
| if(tempcl == 0) { |
| if(tempch == 3) break; |
| SiS_ChrontelResetDB(SiS_Pr,HwInfo); |
| tempcl = 3; |
| tempch++; |
| } |
| tempcl--; |
| temp = SiS_GetCH701x(SiS_Pr,0x76); |
| temp &= 0xfb; /* Reset PLL */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x76); |
| SiS_LongDelay(SiS_Pr,2); |
| temp = SiS_GetCH701x(SiS_Pr,0x76); |
| temp |= 0x04; /* PLL normal operation */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x76); |
| if(HwInfo->jChipType == SIS_740) { |
| SiS_SetCH701x(SiS_Pr,0xe078); /* PLL loop filter */ |
| } else { |
| SiS_SetCH701x(SiS_Pr,0x6078); |
| } |
| SiS_LongDelay(SiS_Pr,2); |
| } while(0); |
| |
| SiS_SetCH701x(SiS_Pr,0x0077); /* MV? */ |
| } |
| |
| static void |
| SiS_ChrontelDoSomething1(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT temp; |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x03); |
| temp |= 0x80; /* Set datapath 1 to TV */ |
| temp &= 0xbf; /* Set datapath 2 to LVDS */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x03); |
| |
| if(HwInfo->jChipType == SIS_740) { |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x1c); |
| temp &= 0xfb; /* Normal XCLK phase */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x1c); |
| |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2d,0x03); |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x64); |
| temp |= 0x40; /* ? Bit not defined */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x64); |
| |
| temp = SiS_GetCH701x(SiS_Pr,0x03); |
| temp &= 0x3f; /* D1 input to both LVDS and TV */ |
| SiS_SetCH701x(SiS_Pr,(temp << 8) | 0x03); |
| |
| if(SiS_Pr->SiS_CustomT == CUT_ASUSL3000D) { |
| SiS_SetCH701x(SiS_Pr,0x4063); /* LVDS off */ |
| SiS_LongDelay(SiS_Pr, 1); |
| SiS_SetCH701x(SiS_Pr,0x0063); /* LVDS on */ |
| SiS_ChrontelResetDB(SiS_Pr, HwInfo); |
| SiS_ChrontelDoSomething2(SiS_Pr, HwInfo); |
| SiS_ChrontelDoSomething3(SiS_Pr, 0, HwInfo); |
| } else { |
| temp = SiS_GetCH701x(SiS_Pr,0x66); |
| if(temp != 0x45) { |
| SiS_ChrontelResetDB(SiS_Pr, HwInfo); |
| SiS_ChrontelDoSomething2(SiS_Pr, HwInfo); |
| SiS_ChrontelDoSomething3(SiS_Pr, 0, HwInfo); |
| } |
| } |
| |
| } else { /* 650 */ |
| |
| SiS_ChrontelResetDB(SiS_Pr,HwInfo); |
| SiS_ChrontelDoSomething2(SiS_Pr,HwInfo); |
| temp = SiS_GetReg(SiS_Pr->SiS_P3d4,0x34); |
| SiS_ChrontelDoSomething3(SiS_Pr,temp,HwInfo); |
| SiS_SetCH701x(SiS_Pr,0xaf76); /* All power on, LVDS normal operation */ |
| |
| } |
| |
| } |
| #endif /* 315 series */ |
| |
| /*********************************************/ |
| /* MAIN: SET CRT2 REGISTER GROUP */ |
| /*********************************************/ |
| |
| BOOLEAN |
| SiS_SetCRT2Group(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT ModeNo) |
| { |
| #ifdef SIS300 |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| #endif |
| USHORT ModeIdIndex, RefreshRateTableIndex; |
| #if 0 |
| USHORT temp; |
| #endif |
| |
| SiS_Pr->SiS_SetFlag |= ProgrammingCRT2; |
| |
| if(!SiS_Pr->UseCustomMode) { |
| SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex); |
| } else { |
| ModeIdIndex = 0; |
| } |
| |
| /* Used for shifting CR33 */ |
| SiS_Pr->SiS_SelectCRT2Rate = 4; |
| |
| SiS_UnLockCRT2(SiS_Pr, HwInfo); |
| |
| RefreshRateTableIndex = SiS_GetRatePtr(SiS_Pr, ModeNo, ModeIdIndex, HwInfo); |
| |
| SiS_SaveCRT2Info(SiS_Pr,ModeNo); |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| SiS_DisableBridge(SiS_Pr,HwInfo); |
| if((SiS_Pr->SiS_IF_DEF_LVDS == 1) && (HwInfo->jChipType == SIS_730)) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,0x80); |
| } |
| SiS_SetCRT2ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, HwInfo); |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & DisableCRT2Display) { |
| SiS_LockCRT2(SiS_Pr, HwInfo); |
| SiS_DisplayOn(SiS_Pr); |
| return TRUE; |
| } |
| |
| SiS_GetCRT2Data(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| |
| /* Set up Panel Link for LVDS and LCDA */ |
| SiS_Pr->SiS_LCDHDES = SiS_Pr->SiS_LCDVDES = 0; |
| if( (SiS_Pr->SiS_IF_DEF_LVDS == 1) || |
| ((SiS_Pr->SiS_VBType & VB_NoLCD) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) || |
| ((HwInfo->jChipType >= SIS_315H) && (SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV)) ) { |
| SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| } |
| |
| #ifdef LINUX_XF86 |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES); |
| xf86DrvMsg(0, X_INFO, "(init301: HDE 0x%03x VDE 0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE); |
| xf86DrvMsg(0, X_INFO, "(init301: VGAHDE 0x%03x VGAVDE 0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE); |
| xf86DrvMsg(0, X_INFO, "(init301: HT 0x%03x VT 0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT); |
| xf86DrvMsg(0, X_INFO, "(init301: VGAHT 0x%03x VGAVT 0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT); |
| #endif |
| #endif |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, HwInfo, RefreshRateTableIndex); |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| |
| SiS_SetGroup2(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| #ifdef SIS315H |
| SiS_SetGroup2_C_ELV(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| #endif |
| SiS_SetGroup3(SiS_Pr, ModeNo, ModeIdIndex, HwInfo); |
| SiS_SetGroup4(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, HwInfo); |
| #ifdef SIS315H |
| SiS_SetGroup4_C_ELV(SiS_Pr, HwInfo, ModeNo, ModeIdIndex); |
| #endif |
| SiS_SetGroup5(SiS_Pr, ModeNo, ModeIdIndex, HwInfo); |
| |
| SiS_SetCRT2Sync(SiS_Pr, ModeNo, RefreshRateTableIndex, HwInfo); |
| |
| /* For 301BDH (Panel link initialization): */ |
| if((SiS_Pr->SiS_VBType & VB_NoLCD) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)) { |
| if(SiS_Pr->SiS_LCDResInfo != Panel_640x480) { |
| if(!((SiS_Pr->SiS_SetFlag & SetDOSMode) && ((ModeNo == 0x03) || (ModeNo == 0x10)))) { |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { |
| SiS_ModCRT1CRTC(SiS_Pr,ModeNo,ModeIdIndex, |
| RefreshRateTableIndex,HwInfo); |
| } |
| } |
| } |
| SiS_SetCRT2ECLK(SiS_Pr,ModeNo,ModeIdIndex, |
| RefreshRateTableIndex,HwInfo); |
| } |
| } |
| |
| } else { |
| |
| SiS_SetCRT2Sync(SiS_Pr, ModeNo, RefreshRateTableIndex, HwInfo); |
| |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| SiS_ModCRT1CRTC(SiS_Pr,ModeNo,ModeIdIndex,RefreshRateTableIndex,HwInfo); |
| } |
| |
| SiS_SetCRT2ECLK(SiS_Pr,ModeNo,ModeIdIndex,RefreshRateTableIndex,HwInfo); |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { |
| #ifdef SIS315H |
| SiS_SetCH701xForLCD(SiS_Pr,HwInfo); |
| #endif |
| } |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| SiS_SetCHTVReg(SiS_Pr,ModeNo,ModeIdIndex,RefreshRateTableIndex); |
| } |
| } |
| } |
| |
| } |
| |
| #ifdef SIS300 |
| if(HwInfo->jChipType < SIS_315H) { |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| if(SiS_Pr->SiS_UseOEM) { |
| if((SiS_Pr->SiS_UseROM) && (SiS_Pr->SiS_UseOEM == -1)) { |
| if((ROMAddr[0x233] == 0x12) && (ROMAddr[0x234] == 0x34)) { |
| SiS_OEM300Setting(SiS_Pr,HwInfo,ModeNo,ModeIdIndex, |
| RefreshRateTableIndex); |
| } |
| } else { |
| SiS_OEM300Setting(SiS_Pr,HwInfo,ModeNo,ModeIdIndex, |
| RefreshRateTableIndex); |
| } |
| } |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| if((SiS_Pr->SiS_CustomT == CUT_BARCO1366) || |
| (SiS_Pr->SiS_CustomT == CUT_BARCO1024)) { |
| SetOEMLCDData2(SiS_Pr, HwInfo, ModeNo, ModeIdIndex,RefreshRateTableIndex); |
| } |
| SiS_DisplayOn(SiS_Pr); |
| } |
| } |
| } |
| #endif |
| |
| #ifdef SIS315H |
| if(HwInfo->jChipType >= SIS_315H) { |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| if(HwInfo->jChipType < SIS_661) { |
| SiS_FinalizeLCD(SiS_Pr, ModeNo, ModeIdIndex, HwInfo); |
| SiS_OEM310Setting(SiS_Pr, HwInfo, ModeNo, ModeIdIndex, RefreshRateTableIndex); |
| } else { |
| SiS_OEM661Setting(SiS_Pr, HwInfo, ModeNo, ModeIdIndex, RefreshRateTableIndex); |
| } |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x01,0x40); |
| } |
| } |
| #endif |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| SiS_EnableBridge(SiS_Pr, HwInfo); |
| } |
| |
| SiS_DisplayOn(SiS_Pr); |
| |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| /* Disable LCD panel when using TV */ |
| SiS_SetRegSR11ANDOR(SiS_Pr,HwInfo,0xFF,0x0C); |
| } else { |
| /* Disable TV when using LCD */ |
| SiS_SetCH70xxANDOR(SiS_Pr,0x010E,0xF8); |
| } |
| } |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| SiS_LockCRT2(SiS_Pr,HwInfo); |
| } |
| |
| return TRUE; |
| } |
| |
| |
| /*********************************************/ |
| /* ENABLE/DISABLE LCD BACKLIGHT (SIS) */ |
| /*********************************************/ |
| |
| void |
| SiS_SiS30xBLOn(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| /* Switch on LCD backlight on SiS30xLV */ |
| SiS_DDC2Delay(SiS_Pr,0xff00); |
| if(!(SiS_GetReg(SiS_Pr->SiS_Part4Port,0x26) & 0x02)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x26,0x02); |
| SiS_WaitVBRetrace(SiS_Pr,HwInfo); |
| } |
| if(!(SiS_GetReg(SiS_Pr->SiS_Part4Port,0x26) & 0x01)) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part4Port,0x26,0x01); |
| } |
| } |
| |
| void |
| SiS_SiS30xBLOff(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| /* Switch off LCD backlight on SiS30xLV */ |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFE); |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x26,0xFD); |
| SiS_DDC2Delay(SiS_Pr,0xe000); |
| } |
| |
| /*********************************************/ |
| /* DDC RELATED FUNCTIONS */ |
| /*********************************************/ |
| |
| static void |
| SiS_SetupDDCN(SiS_Private *SiS_Pr) |
| { |
| SiS_Pr->SiS_DDC_NData = ~SiS_Pr->SiS_DDC_Data; |
| SiS_Pr->SiS_DDC_NClk = ~SiS_Pr->SiS_DDC_Clk; |
| if((SiS_Pr->SiS_DDC_Index == 0x11) && (SiS_Pr->SiS_SensibleSR11)) { |
| SiS_Pr->SiS_DDC_NData &= 0x0f; |
| SiS_Pr->SiS_DDC_NClk &= 0x0f; |
| } |
| } |
| |
| #ifdef SIS300 |
| static UCHAR * |
| SiS_SetTrumpBlockLoop(SiS_Private *SiS_Pr, UCHAR *dataptr) |
| { |
| int i, j, num; |
| USHORT tempah,temp; |
| UCHAR *mydataptr; |
| |
| for(i=0; i<20; i++) { /* Do 20 attempts to write */ |
| mydataptr = dataptr; |
| num = *mydataptr++; |
| if(!num) return mydataptr; |
| if(i) { |
| SiS_SetStop(SiS_Pr); |
| SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT*2); |
| } |
| if(SiS_SetStart(SiS_Pr)) continue; /* Set start condition */ |
| tempah = SiS_Pr->SiS_DDC_DeviceAddr; |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); /* Write DAB (S0=0=write) */ |
| if(temp) continue; /* (ERROR: no ack) */ |
| tempah = *mydataptr++; |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); /* Write register number */ |
| if(temp) continue; /* (ERROR: no ack) */ |
| for(j=0; j<num; j++) { |
| tempah = *mydataptr++; |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah);/* Write DAB (S0=0=write) */ |
| if(temp) break; |
| } |
| if(temp) continue; |
| if(SiS_SetStop(SiS_Pr)) continue; |
| return mydataptr; |
| } |
| return NULL; |
| } |
| |
| static BOOLEAN |
| SiS_SetTrumpionBlock(SiS_Private *SiS_Pr, UCHAR *dataptr) |
| { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xF0; /* DAB (Device Address Byte) */ |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x02; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x01; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| |
| SiS_SetSwitchDDC2(SiS_Pr); |
| |
| while(*dataptr) { |
| dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr); |
| if(!dataptr) return FALSE; |
| } |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "Trumpion block success\n"); |
| #endif |
| return TRUE; |
| } |
| #endif |
| |
| /* The Chrontel 700x is connected to the 630/730 via |
| * the 630/730's DDC/I2C port. |
| * |
| * On 630(S)T chipset, the index changed from 0x11 to |
| * 0x0a, possibly for working around the DDC problems |
| */ |
| |
| static BOOLEAN |
| SiS_SetChReg(SiS_Private *SiS_Pr, USHORT tempbx, USHORT myor) |
| { |
| USHORT tempah,temp,i; |
| |
| for(i=0; i<20; i++) { /* Do 20 attempts to write */ |
| if(i) { |
| SiS_SetStop(SiS_Pr); |
| SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT); |
| } |
| if(SiS_SetStart(SiS_Pr)) continue; /* Set start condition */ |
| tempah = SiS_Pr->SiS_DDC_DeviceAddr; |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); /* Write DAB (S0=0=write) */ |
| if(temp) continue; /* (ERROR: no ack) */ |
| tempah = tempbx & 0x00FF; /* Write RAB */ |
| tempah |= myor; /* (700x: set bit 7, see datasheet) */ |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); |
| if(temp) continue; /* (ERROR: no ack) */ |
| tempah = (tempbx & 0xFF00) >> 8; |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); /* Write data */ |
| if(temp) continue; /* (ERROR: no ack) */ |
| if(SiS_SetStop(SiS_Pr)) continue; /* Set stop condition */ |
| SiS_Pr->SiS_ChrontelInit = 1; |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| #if 0 |
| #ifdef SIS300 |
| /* Write Trumpion register */ |
| static void |
| SiS_SetTrumpReg(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xF0; /* DAB (Device Address Byte) */ |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x02; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x01; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| SiS_SetChReg(SiS_Pr, tempbx, 0); |
| } |
| #endif |
| #endif |
| |
| /* Write to Chrontel 700x */ |
| /* Parameter is [Data (S15-S8) | Register no (S7-S0)] */ |
| void |
| SiS_SetCH700x(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xEA; /* DAB (Device Address Byte) */ |
| |
| if(!(SiS_Pr->SiS_ChrontelInit)) { |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x02; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x01; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| } |
| |
| if( (!(SiS_SetChReg(SiS_Pr, tempbx, 0x80))) && |
| (!(SiS_Pr->SiS_ChrontelInit)) ) { |
| SiS_Pr->SiS_DDC_Index = 0x0a; /* Bit 7 = SC; Bit 6 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x80; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x40; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| |
| SiS_SetChReg(SiS_Pr, tempbx, 0x80); |
| } |
| } |
| |
| /* Write to Chrontel 701x */ |
| /* Parameter is [Data (S15-S8) | Register no (S7-S0)] */ |
| void |
| SiS_SetCH701x(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x08; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x04; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xEA; /* DAB (Device Address Byte) */ |
| SiS_SetChReg(SiS_Pr, tempbx, 0); |
| } |
| |
| void |
| SiS_SetCH70xx(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) |
| SiS_SetCH700x(SiS_Pr,tempbx); |
| else |
| SiS_SetCH701x(SiS_Pr,tempbx); |
| } |
| |
| static USHORT |
| SiS_GetChReg(SiS_Private *SiS_Pr, USHORT myor) |
| { |
| USHORT tempah,temp,i; |
| |
| for(i=0; i<20; i++) { /* Do 20 attempts to read */ |
| if(i) { |
| SiS_SetStop(SiS_Pr); |
| SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT); |
| } |
| if(SiS_SetStart(SiS_Pr)) continue; /* Set start condition */ |
| tempah = SiS_Pr->SiS_DDC_DeviceAddr; |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); /* Write DAB (S0=0=write) */ |
| if(temp) continue; /* (ERROR: no ack) */ |
| tempah = SiS_Pr->SiS_DDC_ReadAddr | myor; /* Write RAB (700x: | 0x80) */ |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); |
| if(temp) continue; /* (ERROR: no ack) */ |
| if (SiS_SetStart(SiS_Pr)) continue; /* Re-start */ |
| tempah = SiS_Pr->SiS_DDC_DeviceAddr | 0x01;/* DAB | 0x01 = Read */ |
| temp = SiS_WriteDDC2Data(SiS_Pr,tempah); /* DAB (S0=1=read) */ |
| if(temp) continue; /* (ERROR: no ack) */ |
| tempah = SiS_ReadDDC2Data(SiS_Pr,tempah); /* Read byte */ |
| if(SiS_SetStop(SiS_Pr)) continue; /* Stop condition */ |
| SiS_Pr->SiS_ChrontelInit = 1; |
| return(tempah); |
| } |
| return 0xFFFF; |
| } |
| |
| #if 0 |
| #ifdef SIS300 |
| /* Read from Trumpion */ |
| static USHORT |
| SiS_GetTrumpReg(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xF0; /* DAB */ |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x02; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x01; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| SiS_Pr->SiS_DDC_ReadAddr = tempbx; |
| return(SiS_GetChReg(SiS_Pr,0)); |
| } |
| #endif |
| #endif |
| |
| /* Read from Chrontel 700x */ |
| /* Parameter is [Register no (S7-S0)] */ |
| USHORT |
| SiS_GetCH700x(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| USHORT result; |
| |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xEA; /* DAB */ |
| |
| if(!(SiS_Pr->SiS_ChrontelInit)) { |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x02; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x01; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| } |
| |
| SiS_Pr->SiS_DDC_ReadAddr = tempbx; |
| |
| if( ((result = SiS_GetChReg(SiS_Pr,0x80)) == 0xFFFF) && |
| (!SiS_Pr->SiS_ChrontelInit) ) { |
| |
| SiS_Pr->SiS_DDC_Index = 0x0a; |
| SiS_Pr->SiS_DDC_Data = 0x80; |
| SiS_Pr->SiS_DDC_Clk = 0x40; |
| SiS_SetupDDCN(SiS_Pr); |
| |
| result = SiS_GetChReg(SiS_Pr,0x80); |
| } |
| return(result); |
| } |
| |
| /* Read from Chrontel 701x */ |
| /* Parameter is [Register no (S7-S0)] */ |
| USHORT |
| SiS_GetCH701x(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| SiS_Pr->SiS_DDC_Index = 0x11; /* Bit 0 = SC; Bit 1 = SD */ |
| SiS_Pr->SiS_DDC_Data = 0x08; /* Bitmask in IndexReg for Data */ |
| SiS_Pr->SiS_DDC_Clk = 0x04; /* Bitmask in IndexReg for Clk */ |
| SiS_SetupDDCN(SiS_Pr); |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xEA; /* DAB */ |
| |
| SiS_Pr->SiS_DDC_ReadAddr = tempbx; |
| |
| return(SiS_GetChReg(SiS_Pr,0)); |
| } |
| |
| /* Read from Chrontel 70xx */ |
| /* Parameter is [Register no (S7-S0)] */ |
| USHORT |
| SiS_GetCH70xx(SiS_Private *SiS_Pr, USHORT tempbx) |
| { |
| if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) |
| return(SiS_GetCH700x(SiS_Pr, tempbx)); |
| else |
| return(SiS_GetCH701x(SiS_Pr, tempbx)); |
| } |
| |
| /* Our own DDC functions */ |
| static USHORT |
| SiS_InitDDCRegs(SiS_Private *SiS_Pr, unsigned long VBFlags, int VGAEngine, |
| USHORT adaptnum, USHORT DDCdatatype, BOOLEAN checkcr32) |
| { |
| unsigned char ddcdtype[] = { 0xa0, 0xa0, 0xa0, 0xa2, 0xa6 }; |
| unsigned char flag, cr32; |
| USHORT temp = 0, myadaptnum = adaptnum; |
| |
| if(adaptnum != 0) { |
| if(!(VBFlags & (VB_301|VB_301B|VB_301C|VB_302B))) return 0xFFFF; |
| if((VBFlags & VB_30xBDH) && (adaptnum == 1)) return 0xFFFF; |
| } |
| |
| /* adapternum for SiS bridges: 0 = CRT1, 1 = LCD, 2 = VGA2 */ |
| |
| SiS_Pr->SiS_ChrontelInit = 0; /* force re-detection! */ |
| |
| SiS_Pr->SiS_DDC_SecAddr = 0; |
| SiS_Pr->SiS_DDC_DeviceAddr = ddcdtype[DDCdatatype]; |
| SiS_Pr->SiS_DDC_Port = SiS_Pr->SiS_P3c4; |
| SiS_Pr->SiS_DDC_Index = 0x11; |
| flag = 0xff; |
| |
| cr32 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x32); |
| |
| #if 0 |
| if(VBFlags & VB_SISBRIDGE) { |
| if(myadaptnum == 0) { |
| if(!(cr32 & 0x20)) { |
| myadaptnum = 2; |
| if(!(cr32 & 0x10)) { |
| myadaptnum = 1; |
| if(!(cr32 & 0x08)) { |
| myadaptnum = 0; |
| } |
| } |
| } |
| } |
| } |
| #endif |
| |
| if(VGAEngine == SIS_300_VGA) { /* 300 series */ |
| |
| if(myadaptnum != 0) { |
| flag = 0; |
| if(VBFlags & VB_SISBRIDGE) { |
| SiS_Pr->SiS_DDC_Port = SiS_Pr->SiS_Part4Port; |
| SiS_Pr->SiS_DDC_Index = 0x0f; |
| } |
| } |
| |
| if(!(VBFlags & VB_301)) { |
| if((cr32 & 0x80) && (checkcr32)) { |
| if(myadaptnum >= 1) { |
| if(!(cr32 & 0x08)) { |
| myadaptnum = 1; |
| if(!(cr32 & 0x10)) return 0xFFFF; |
| } |
| } |
| } |
| } |
| |
| temp = 4 - (myadaptnum * 2); |
| if(flag) temp = 0; |
| |
| } else { /* 315/330 series */ |
| |
| /* here we simplify: 0 = CRT1, 1 = CRT2 (VGA, LCD) */ |
| |
| if(VBFlags & VB_SISBRIDGE) { |
| if(myadaptnum == 2) { |
| myadaptnum = 1; |
| } |
| } |
| |
| if(myadaptnum == 1) { |
| flag = 0; |
| if(VBFlags & VB_SISBRIDGE) { |
| SiS_Pr->SiS_DDC_Port = SiS_Pr->SiS_Part4Port; |
| SiS_Pr->SiS_DDC_Index = 0x0f; |
| } |
| } |
| |
| if((cr32 & 0x80) && (checkcr32)) { |
| if(myadaptnum >= 1) { |
| if(!(cr32 & 0x08)) { |
| myadaptnum = 1; |
| if(!(cr32 & 0x10)) return 0xFFFF; |
| } |
| } |
| } |
| |
| temp = myadaptnum; |
| if(myadaptnum == 1) { |
| temp = 0; |
| if(VBFlags & VB_LVDS) flag = 0xff; |
| } |
| |
| if(flag) temp = 0; |
| } |
| |
| SiS_Pr->SiS_DDC_Data = 0x02 << temp; |
| SiS_Pr->SiS_DDC_Clk = 0x01 << temp; |
| |
| SiS_SetupDDCN(SiS_Pr); |
| |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n", |
| SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp); |
| #endif |
| |
| return 0; |
| } |
| |
| static USHORT |
| SiS_WriteDABDDC(SiS_Private *SiS_Pr) |
| { |
| if(SiS_SetStart(SiS_Pr)) return 0xFFFF; |
| if(SiS_WriteDDC2Data(SiS_Pr, SiS_Pr->SiS_DDC_DeviceAddr)) { |
| return 0xFFFF; |
| } |
| if(SiS_WriteDDC2Data(SiS_Pr, SiS_Pr->SiS_DDC_SecAddr)) { |
| return 0xFFFF; |
| } |
| return(0); |
| } |
| |
| static USHORT |
| SiS_PrepareReadDDC(SiS_Private *SiS_Pr) |
| { |
| if(SiS_SetStart(SiS_Pr)) return 0xFFFF; |
| if(SiS_WriteDDC2Data(SiS_Pr, (SiS_Pr->SiS_DDC_DeviceAddr | 0x01))) { |
| return 0xFFFF; |
| } |
| return(0); |
| } |
| |
| static USHORT |
| SiS_PrepareDDC(SiS_Private *SiS_Pr) |
| { |
| if(SiS_WriteDABDDC(SiS_Pr)) SiS_WriteDABDDC(SiS_Pr); |
| if(SiS_PrepareReadDDC(SiS_Pr)) return(SiS_PrepareReadDDC(SiS_Pr)); |
| return(0); |
| } |
| |
| static void |
| SiS_SendACK(SiS_Private *SiS_Pr, USHORT yesno) |
| { |
| SiS_SetSCLKLow(SiS_Pr); |
| if(yesno) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| SiS_Pr->SiS_DDC_Data); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| 0); |
| } |
| SiS_SetSCLKHigh(SiS_Pr); |
| } |
| |
| static USHORT |
| SiS_DoProbeDDC(SiS_Private *SiS_Pr) |
| { |
| unsigned char mask, value; |
| USHORT temp, ret=0; |
| BOOLEAN failed = FALSE; |
| |
| SiS_SetSwitchDDC2(SiS_Pr); |
| if(SiS_PrepareDDC(SiS_Pr)) { |
| SiS_SetStop(SiS_Pr); |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n"); |
| #endif |
| return(0xFFFF); |
| } |
| mask = 0xf0; |
| value = 0x20; |
| if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) { |
| temp = (unsigned char)SiS_ReadDDC2Data(SiS_Pr, 0); |
| SiS_SendACK(SiS_Pr, 0); |
| if(temp == 0) { |
| mask = 0xff; |
| value = 0xff; |
| } else { |
| failed = TRUE; |
| ret = 0xFFFF; |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n"); |
| #endif |
| } |
| } |
| if(failed == FALSE) { |
| temp = (unsigned char)SiS_ReadDDC2Data(SiS_Pr, 0); |
| SiS_SendACK(SiS_Pr, 1); |
| temp &= mask; |
| if(temp == value) ret = 0; |
| else { |
| ret = 0xFFFF; |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n"); |
| #endif |
| if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) { |
| if(temp == 0x30) ret = 0; |
| } |
| } |
| } |
| SiS_SetStop(SiS_Pr); |
| return(ret); |
| } |
| |
| static USHORT |
| SiS_ProbeDDC(SiS_Private *SiS_Pr) |
| { |
| USHORT flag; |
| |
| flag = 0x180; |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa0; |
| if(!(SiS_DoProbeDDC(SiS_Pr))) flag |= 0x02; |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa2; |
| if(!(SiS_DoProbeDDC(SiS_Pr))) flag |= 0x08; |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa6; |
| if(!(SiS_DoProbeDDC(SiS_Pr))) flag |= 0x10; |
| if(!(flag & 0x1a)) flag = 0; |
| return(flag); |
| } |
| |
| static USHORT |
| SiS_ReadDDC(SiS_Private *SiS_Pr, USHORT DDCdatatype, unsigned char *buffer) |
| { |
| USHORT flag, length, i; |
| unsigned char chksum,gotcha; |
| |
| if(DDCdatatype > 4) return 0xFFFF; |
| |
| flag = 0; |
| SiS_SetSwitchDDC2(SiS_Pr); |
| if(!(SiS_PrepareDDC(SiS_Pr))) { |
| length = 127; |
| if(DDCdatatype != 1) length = 255; |
| chksum = 0; |
| gotcha = 0; |
| for(i=0; i<length; i++) { |
| buffer[i] = (unsigned char)SiS_ReadDDC2Data(SiS_Pr, 0); |
| chksum += buffer[i]; |
| gotcha |= buffer[i]; |
| SiS_SendACK(SiS_Pr, 0); |
| } |
| buffer[i] = (unsigned char)SiS_ReadDDC2Data(SiS_Pr, 0); |
| chksum += buffer[i]; |
| SiS_SendACK(SiS_Pr, 1); |
| if(gotcha) flag = (USHORT)chksum; |
| else flag = 0xFFFF; |
| } else { |
| flag = 0xFFFF; |
| } |
| SiS_SetStop(SiS_Pr); |
| return(flag); |
| } |
| |
| /* Our private DDC functions |
| |
| It complies somewhat with the corresponding VESA function |
| in arguments and return values. |
| |
| Since this is probably called before the mode is changed, |
| we use our pre-detected pSiS-values instead of SiS_Pr as |
| regards chipset and video bridge type. |
| |
| Arguments: |
| adaptnum: 0=CRT1(analog), 1=CRT2/LCD(digital), 2=CRT2/VGA2(analog) |
| CRT2 DDC is only supported on SiS301, 301B, 301C, 302B. |
| LCDA is CRT1, but DDC is read from CRT2 port. |
| DDCdatatype: 0=Probe, 1=EDID, 2=EDID+VDIF, 3=EDID V2 (P&D), 4=EDID V2 (FPDI-2) |
| buffer: ptr to 256 data bytes which will be filled with read data. |
| |
| Returns 0xFFFF if error, otherwise |
| if DDCdatatype > 0: Returns 0 if reading OK (included a correct checksum) |
| if DDCdatatype = 0: Returns supported DDC modes |
| |
| */ |
| USHORT |
| SiS_HandleDDC(SiS_Private *SiS_Pr, unsigned long VBFlags, int VGAEngine, |
| USHORT adaptnum, USHORT DDCdatatype, unsigned char *buffer) |
| { |
| unsigned char sr1f,cr17=1; |
| USHORT result; |
| |
| if(adaptnum > 2) return 0xFFFF; |
| if(DDCdatatype > 4) return 0xFFFF; |
| if((!(VBFlags & VB_VIDEOBRIDGE)) && (adaptnum > 0)) return 0xFFFF; |
| if(SiS_InitDDCRegs(SiS_Pr, VBFlags, VGAEngine, adaptnum, DDCdatatype, FALSE) == 0xFFFF) return 0xFFFF; |
| |
| sr1f = SiS_GetReg(SiS_Pr->SiS_P3c4,0x1f); |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x1f,0x3f,0x04); |
| if(VGAEngine == SIS_300_VGA) { |
| cr17 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x17) & 0x80; |
| if(!cr17) { |
| SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x17,0x80); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x00,0x01); |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x00,0x03); |
| } |
| } |
| if((sr1f) || (!cr17)) { |
| SiS_WaitRetrace1(SiS_Pr); |
| SiS_WaitRetrace1(SiS_Pr); |
| SiS_WaitRetrace1(SiS_Pr); |
| SiS_WaitRetrace1(SiS_Pr); |
| } |
| |
| if(DDCdatatype == 0) { |
| result = SiS_ProbeDDC(SiS_Pr); |
| } else { |
| result = SiS_ReadDDC(SiS_Pr, DDCdatatype, buffer); |
| if((!result) && (DDCdatatype == 1)) { |
| if((buffer[0] == 0x00) && (buffer[1] == 0xff) && |
| (buffer[2] == 0xff) && (buffer[3] == 0xff) && |
| (buffer[4] == 0xff) && (buffer[5] == 0xff) && |
| (buffer[6] == 0xff) && (buffer[7] == 0x00) && |
| (buffer[0x12] == 1)) { |
| if(adaptnum == 1) { |
| if(!(buffer[0x14] & 0x80)) result = 0xFFFE; |
| } else { |
| if(buffer[0x14] & 0x80) result = 0xFFFE; |
| } |
| } |
| } |
| } |
| SiS_SetReg(SiS_Pr->SiS_P3c4,0x1f,sr1f); |
| if(VGAEngine == SIS_300_VGA) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x17,0x7f,cr17); |
| } |
| return result; |
| } |
| |
| #ifdef LINUX_XF86 |
| |
| static BOOLEAN |
| checkedid1(unsigned char *buffer) |
| { |
| /* Check header */ |
| if((buffer[0] != 0x00) || |
| (buffer[1] != 0xff) || |
| (buffer[2] != 0xff) || |
| (buffer[3] != 0xff) || |
| (buffer[4] != 0xff) || |
| (buffer[5] != 0xff) || |
| (buffer[6] != 0xff) || |
| (buffer[7] != 0x00)) |
| return FALSE; |
| |
| /* Check EDID version and revision */ |
| if((buffer[0x12] != 1) || (buffer[0x13] > 4)) return FALSE; |
| |
| /* Check week of manufacture for sanity */ |
| if(buffer[0x10] > 53) return FALSE; |
| |
| /* Check year of manufacture for sanity */ |
| if(buffer[0x11] > 40) return FALSE; |
| |
| return TRUE; |
| } |
| |
| static BOOLEAN |
| checkedid2(unsigned char *buffer) |
| { |
| USHORT year = buffer[6] | (buffer[7] << 8); |
| |
| /* Check EDID version */ |
| if((buffer[0] & 0xf0) != 0x20) return FALSE; |
| |
| /* Check week of manufacture for sanity */ |
| if(buffer[5] > 53) return FALSE; |
| |
| /* Check year of manufacture for sanity */ |
| if((year != 0) && ((year < 1990) || (year > 2030))) return FALSE; |
| |
| return TRUE; |
| } |
| |
| /* Sense the LCD parameters (CR36, CR37) via DDC */ |
| /* SiS30x(B) only */ |
| USHORT |
| SiS_SenseLCDDDC(SiS_Private *SiS_Pr, SISPtr pSiS) |
| { |
| USHORT DDCdatatype, paneltype, flag, xres=0, yres=0; |
| USHORT index, myindex, lumsize, numcodes, panelvendor, panelproduct; |
| int maxx=0, maxy=0, prefx=0, prefy=0; |
| unsigned char cr37=0, seekcode; |
| BOOLEAN checkexpand = FALSE; |
| BOOLEAN havesync = FALSE; |
| BOOLEAN indb = FALSE; |
| int retry, i; |
| unsigned char buffer[256]; |
| |
| for(i=0; i<7; i++) SiS_Pr->CP_DataValid[i] = FALSE; |
| SiS_Pr->CP_HaveCustomData = FALSE; |
| SiS_Pr->CP_MaxX = SiS_Pr->CP_MaxY = SiS_Pr->CP_MaxClock = 0; |
| SiS_Pr->CP_PreferredX = SiS_Pr->CP_PreferredY = 0; |
| SiS_Pr->CP_PreferredIndex = -1; |
| SiS_Pr->CP_PrefClock = 0; |
| SiS_Pr->PanelSelfDetected = FALSE; |
| |
| if(!(pSiS->VBFlags & (VB_301|VB_301B|VB_301C|VB_302B))) return 0; |
| if(pSiS->VBFlags & VB_30xBDH) return 0; |
| |
| if(SiS_InitDDCRegs(SiS_Pr, pSiS->VBFlags, pSiS->VGAEngine, 1, 0, FALSE) == 0xFFFF) return 0; |
| |
| SiS_Pr->SiS_DDC_SecAddr = 0x00; |
| |
| /* Probe supported DA's */ |
| flag = SiS_ProbeDDC(SiS_Pr); |
| #ifdef TWDEBUG |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_INFO, |
| "CRT2 DDC capabilities 0x%x\n", flag); |
| #endif |
| if(flag & 0x10) { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa6; /* EDID V2 (FP) */ |
| DDCdatatype = 4; |
| } else if(flag & 0x08) { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa2; /* EDID V2 (P&D-D Monitor) */ |
| DDCdatatype = 3; |
| } else if(flag & 0x02) { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa0; /* EDID V1 */ |
| DDCdatatype = 1; |
| } else return 0; /* no DDC support (or no device attached) */ |
| |
| /* Read the entire EDID */ |
| retry = 2; |
| do { |
| if(SiS_ReadDDC(SiS_Pr, DDCdatatype, buffer)) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "CRT2: DDC read failed (attempt %d), %s\n", |
| (3-retry), (retry == 1) ? "giving up" : "retrying"); |
| retry--; |
| if(retry == 0) return 0xFFFF; |
| } else break; |
| } while(1); |
| |
| #ifdef TWDEBUG |
| for(i=0; i<256; i+=16) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| buffer[i], buffer[i+1], buffer[i+2], buffer[i+3], |
| buffer[i+4], buffer[i+5], buffer[i+6], buffer[i+7], |
| buffer[i+8], buffer[i+9], buffer[i+10], buffer[i+11], |
| buffer[i+12], buffer[i+13], buffer[i+14], buffer[i+15]); |
| } |
| #endif |
| |
| /* Analyze EDID and retrieve LCD panel information */ |
| paneltype = 0; |
| switch(DDCdatatype) { |
| case 1: /* Analyze EDID V1 */ |
| /* Catch a few clear cases: */ |
| if(!(checkedid1(buffer))) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: EDID corrupt\n"); |
| return 0; |
| } |
| |
| if(!(buffer[0x14] & 0x80)) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: Attached display expects analog input (0x%02x)\n", |
| buffer[0x14]); |
| return 0; |
| } |
| |
| if((buffer[0x18] & 0x18) != 0x08) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: Warning: Attached display is not of RGB but of %s type (0x%02x)\n", |
| ((buffer[0x18] & 0x18) == 0x00) ? "monochrome/greyscale" : |
| ( ((buffer[0x18] & 0x18) == 0x10) ? "non-RGB multicolor" : |
| "undefined"), |
| buffer[0x18]); |
| } |
| |
| /* Now analyze the first Detailed Timing Block and see |
| * if the preferred timing mode is stored there. If so, |
| * check if this is a standard panel for which we already |
| * know the timing. |
| */ |
| |
| paneltype = Panel_Custom; |
| checkexpand = FALSE; |
| |
| panelvendor = buffer[9] | (buffer[8] << 8); |
| panelproduct = buffer[10] | (buffer[11] << 8); |
| |
| /* Overrule bogus preferred modes from database */ |
| if((indb = SiS_FindPanelFromDB(pSiS, panelvendor, panelproduct, &maxx, &maxy, &prefx, &prefy))) { |
| if(prefx) SiS_Pr->CP_PreferredX = xres = prefx; |
| if(prefy) SiS_Pr->CP_PreferredY = yres = prefy; |
| } |
| |
| if(buffer[0x18] & 0x02) { |
| |
| USHORT pclk = (buffer[0x36] | (buffer[0x37] << 8)); |
| USHORT phb = (buffer[0x39] | ((buffer[0x3a] & 0x0f) << 8)); |
| USHORT pvb = (buffer[0x3c] | ((buffer[0x3d] & 0x0f) << 8)); |
| |
| if(!xres) SiS_Pr->CP_PreferredX = xres = buffer[0x38] | ((buffer[0x3a] & 0xf0) << 4); |
| if(!yres) SiS_Pr->CP_PreferredY = yres = buffer[0x3b] | ((buffer[0x3d] & 0xf0) << 4); |
| |
| switch(xres) { |
| #if 0 /* Treat as custom */ |
| case 800: |
| if(yres == 600) { |
| paneltype = Panel_800x600; |
| checkexpand = TRUE; |
| } |
| break; |
| #endif |
| case 1024: |
| if(yres == 768) { |
| paneltype = Panel_1024x768; |
| checkexpand = TRUE; |
| } |
| break; |
| case 1280: |
| if(yres == 1024) { |
| paneltype = Panel_1280x1024; |
| checkexpand = TRUE; |
| } else if(yres == 960) { |
| if(pSiS->VGAEngine == SIS_300_VGA) { |
| paneltype = Panel300_1280x960; |
| } else { |
| paneltype = Panel310_1280x960; |
| } |
| } else if(yres == 768) { |
| if( (pclk == 8100) && |
| (phb == (1688 - 1280)) && |
| (pvb == (802 - 768)) ) { |
| paneltype = Panel_1280x768; |
| checkexpand = FALSE; |
| cr37 |= 0x10; |
| } |
| } else if(yres == 800) { |
| if( (pclk == 6900) && |
| (phb == (1408 - 1280)) && |
| (pvb == (816 - 800)) ) { |
| paneltype = Panel_1280x800; |
| } |
| } |
| break; |
| case 1400: |
| if(pSiS->VGAEngine == SIS_315_VGA) { |
| if(yres == 1050) { |
| paneltype = Panel310_1400x1050; |
| checkexpand = TRUE; |
| } |
| } |
| break; |
| case 1600: |
| if(pSiS->VGAEngine == SIS_315_VGA) { |
| if(pSiS->VBFlags & VB_301C) { |
| if(yres == 1200) { |
| paneltype = Panel310_1600x1200; |
| checkexpand = TRUE; |
| } |
| } |
| } |
| break; |
| } |
| |
| /* Save sync: This is used if "Pass 1:1" is off; in this case |
| * we always use the panel's native mode = this "preferred mode" |
| * we just have been analysing. Hence, we also need its sync. |
| */ |
| if((buffer[0x47] & 0x18) == 0x18) { |
| cr37 |= ((((buffer[0x47] & 0x06) ^ 0x06) << 5) | 0x20); |
| havesync = TRUE; |
| } else { |
| /* What now? There is no digital separate output timing... */ |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_WARNING, |
| "LCD sense: Unable to retrieve Sync polarity information\n"); |
| cr37 |= 0xc0; /* Default */ |
| } |
| |
| } |
| |
| /* Check against our database; eg. Sanyo Z2 projector reports |
| * 1024x768 as preferred mode, although it supports 1280x720 |
| * natively in non-HDCP mode. Treat such wrongly reporting |
| * panels as custom and fixup actual maximum resolutions. |
| */ |
| if(paneltype != Panel_Custom) { |
| if(indb) { |
| paneltype = Panel_Custom; |
| SiS_Pr->CP_MaxX = maxx; |
| SiS_Pr->CP_MaxY = maxy; |
| /* Leave preferred unchanged (MUST contain a valid mode!) */ |
| } |
| } |
| |
| /* If we still don't know what panel this is, we take it |
| * as a custom panel and derive the timing data from the |
| * detailed timing blocks |
| */ |
| if(paneltype == Panel_Custom) { |
| |
| int i, temp, base = 0x36; |
| unsigned long estpack; |
| const unsigned short estx[] = { |
| 720, 720, 640, 640, 640, 640, 800, 800, |
| 800, 800, 832,1024,1024,1024,1024,1280, |
| 1152 |
| }; |
| const unsigned short esty[] = { |
| 400, 400, 480, 480, 480, 480, 600, 600, |
| 600, 600, 624, 768, 768, 768, 768,1024, |
| 870 |
| }; |
| const int estclk[] = { |
| 0, 0, 25100, 0, 31500, 31500, 36100, 40000, |
| 50100, 49500, 0, 0, 65100, 75200, 78700,135200, |
| 0 |
| }; |
| |
| paneltype = 0; |
| SiS_Pr->CP_Supports64048075 = TRUE; |
| |
| /* Find the maximum resolution */ |
| |
| /* 1. From Established timings */ |
| estpack = (buffer[0x23] << 9) | (buffer[0x24] << 1) | ((buffer[0x25] >> 7) & 0x01); |
| for(i=16; i>=0; i--) { |
| if(estpack & (1 << i)) { |
| if(estx[16 - i] > SiS_Pr->CP_MaxX) SiS_Pr->CP_MaxX = estx[16 - i]; |
| if(esty[16 - i] > SiS_Pr->CP_MaxY) SiS_Pr->CP_MaxY = esty[16 - i]; |
| if(estclk[16 - i] > SiS_Pr->CP_MaxClock) SiS_Pr->CP_MaxClock = estclk[16 - i]; |
| } |
| } |
| |
| /* By default we drive the LCD at 75Hz in 640x480 mode; if |
| * the panel does not provide this mode, use 60hz |
| */ |
| if(!(buffer[0x23] & 0x04)) SiS_Pr->CP_Supports64048075 = FALSE; |
| |
| /* 2. From Standard Timings */ |
| for(i=0x26; i < 0x36; i+=2) { |
| if((buffer[i] != 0x01) && (buffer[i+1] != 0x01)) { |
| temp = (buffer[i] + 31) * 8; |
| if(temp > SiS_Pr->CP_MaxX) SiS_Pr->CP_MaxX = temp; |
| switch((buffer[i+1] & 0xc0) >> 6) { |
| case 0x03: temp = temp * 9 / 16; break; |
| case 0x02: temp = temp * 4 / 5; break; |
| case 0x01: temp = temp * 3 / 4; break; |
| } |
| if(temp > SiS_Pr->CP_MaxY) SiS_Pr->CP_MaxY = temp; |
| } |
| } |
| |
| /* Now extract the Detailed Timings and convert them into modes */ |
| |
| for(i = 0; i < 4; i++, base += 18) { |
| |
| /* Is this a detailed timing block or a monitor descriptor? */ |
| if(buffer[base] || buffer[base+1] || buffer[base+2]) { |
| |
| xres = buffer[base+2] | ((buffer[base+4] & 0xf0) << 4); |
| yres = buffer[base+5] | ((buffer[base+7] & 0xf0) << 4); |
| |
| SiS_Pr->CP_HDisplay[i] = xres; |
| SiS_Pr->CP_HSyncStart[i] = xres + (buffer[base+8] | ((buffer[base+11] & 0xc0) << 2)); |
| SiS_Pr->CP_HSyncEnd[i] = SiS_Pr->CP_HSyncStart[i] + (buffer[base+9] | ((buffer[base+11] & 0x30) << 4)); |
| SiS_Pr->CP_HTotal[i] = xres + (buffer[base+3] | ((buffer[base+4] & 0x0f) << 8)); |
| SiS_Pr->CP_HBlankStart[i] = xres + 1; |
| SiS_Pr->CP_HBlankEnd[i] = SiS_Pr->CP_HTotal[i]; |
| |
| SiS_Pr->CP_VDisplay[i] = yres; |
| SiS_Pr->CP_VSyncStart[i] = yres + (((buffer[base+10] & 0xf0) >> 4) | ((buffer[base+11] & 0x0c) << 2)); |
| SiS_Pr->CP_VSyncEnd[i] = SiS_Pr->CP_VSyncStart[i] + ((buffer[base+10] & 0x0f) | ((buffer[base+11] & 0x03) << 4)); |
| SiS_Pr->CP_VTotal[i] = yres + (buffer[base+6] | ((buffer[base+7] & 0x0f) << 8)); |
| SiS_Pr->CP_VBlankStart[i] = yres + 1; |
| SiS_Pr->CP_VBlankEnd[i] = SiS_Pr->CP_VTotal[i]; |
| |
| SiS_Pr->CP_Clock[i] = (buffer[base] | (buffer[base+1] << 8)) * 10; |
| |
| SiS_Pr->CP_DataValid[i] = TRUE; |
| |
| /* Sort out invalid timings, interlace and too high clocks */ |
| if((SiS_Pr->CP_HDisplay[i] & 7) || |
| (SiS_Pr->CP_HDisplay[i] > SiS_Pr->CP_HSyncStart[i]) || |
| (SiS_Pr->CP_HDisplay[i] >= SiS_Pr->CP_HSyncEnd[i]) || |
| (SiS_Pr->CP_HDisplay[i] >= SiS_Pr->CP_HTotal[i]) || |
| (SiS_Pr->CP_HSyncStart[i] >= SiS_Pr->CP_HSyncEnd[i]) || |
| (SiS_Pr->CP_HSyncStart[i] > SiS_Pr->CP_HTotal[i]) || |
| (SiS_Pr->CP_HSyncEnd[i] > SiS_Pr->CP_HTotal[i]) || |
| (SiS_Pr->CP_VDisplay[i] > SiS_Pr->CP_VSyncStart[i]) || |
| (SiS_Pr->CP_VDisplay[i] >= SiS_Pr->CP_VSyncEnd[i]) || |
| (SiS_Pr->CP_VDisplay[i] >= SiS_Pr->CP_VTotal[i]) || |
| (SiS_Pr->CP_VSyncStart[i] > SiS_Pr->CP_VSyncEnd[i]) || |
| (SiS_Pr->CP_VSyncStart[i] > SiS_Pr->CP_VTotal[i]) || |
| (SiS_Pr->CP_VSyncEnd[i] > SiS_Pr->CP_VTotal[i]) || |
| (((pSiS->VBFlags & VB_301C) && (SiS_Pr->CP_Clock[i] > 162500)) || |
| ((!(pSiS->VBFlags & VB_301C)) && |
| ((SiS_Pr->CP_Clock[i] > 108200) || (SiS_Pr->CP_VDisplay[i] > 1024) || |
| (SiS_Pr->CP_HDisplay[i] > 1600)))) || |
| (buffer[base+17] & 0x80)) { |
| |
| SiS_Pr->CP_DataValid[i] = FALSE; |
| |
| } else { |
| |
| SiS_Pr->CP_HaveCustomData = TRUE; |
| |
| if(xres > SiS_Pr->CP_MaxX) SiS_Pr->CP_MaxX = xres; |
| if(yres > SiS_Pr->CP_MaxY) SiS_Pr->CP_MaxY = yres; |
| if(SiS_Pr->CP_Clock[i] > SiS_Pr->CP_MaxClock) SiS_Pr->CP_MaxClock = SiS_Pr->CP_Clock[i]; |
| |
| if((SiS_Pr->CP_PreferredX == xres) && (SiS_Pr->CP_PreferredY == yres)) { |
| SiS_Pr->CP_PreferredIndex = i; |
| SiS_MakeClockRegs(pSiS->pScrn, SiS_Pr->CP_Clock[i], &SiS_Pr->CP_PrefSR2B, &SiS_Pr->CP_PrefSR2C); |
| SiS_Pr->CP_PrefClock = (SiS_Pr->CP_Clock[i] / 1000) + 1; |
| } |
| |
| /* Extract the sync polarisation information. This only works |
| * if the Flags indicate a digital separate output. |
| */ |
| if((buffer[base+17] & 0x18) == 0x18) { |
| SiS_Pr->CP_HSync_P[i] = (buffer[base+17] & 0x02) ? TRUE : FALSE; |
| SiS_Pr->CP_VSync_P[i] = (buffer[base+17] & 0x04) ? TRUE : FALSE; |
| SiS_Pr->CP_SyncValid[i] = TRUE; |
| if((i == SiS_Pr->CP_PreferredIndex) && (!havesync)) { |
| cr37 |= ((((buffer[base+17] & 0x06) ^ 0x06) << 5) | 0x20); |
| havesync = TRUE; |
| } |
| } else { |
| SiS_Pr->CP_SyncValid[i] = FALSE; |
| } |
| |
| } |
| |
| } else if((!buffer[base]) && (!buffer[base+1]) && (!buffer[base+2]) && (!buffer[base+4])) { |
| |
| /* Maximum pixclock from Monitor Range Limits */ |
| if((buffer[base+3] == 0xfd) && (buffer[base+9] != 0xff)) { |
| int maxclk = buffer[base+9] * 10; |
| /* More than 170 is not supported anyway */ |
| if(maxclk <= 170) SiS_Pr->CP_MaxClock = maxclk * 1000; |
| } |
| |
| } |
| |
| } |
| |
| if(SiS_Pr->CP_MaxX && SiS_Pr->CP_MaxY) { |
| paneltype = Panel_Custom; |
| checkexpand = FALSE; |
| cr37 |= 0x10; |
| SiS_Pr->CP_Vendor = panelvendor; |
| SiS_Pr->CP_Product = panelproduct; |
| } |
| |
| } |
| |
| if(paneltype && checkexpand) { |
| /* If any of the Established low-res modes is supported, the |
| * panel can scale automatically. For 800x600 panels, we only |
| * check the even lower ones. |
| */ |
| if(paneltype == Panel_800x600) { |
| if(buffer[0x23] & 0xfc) cr37 |= 0x10; |
| } else { |
| if(buffer[0x23]) cr37 |= 0x10; |
| } |
| } |
| |
| break; |
| |
| case 3: /* Analyze EDID V2 */ |
| case 4: |
| index = 0; |
| |
| if(!(checkedid2(buffer))) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: EDID corrupt\n"); |
| return 0; |
| } |
| |
| if((buffer[0x41] & 0x0f) == 0x03) { |
| index = 0x42 + 3; |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: Display supports TMDS input on primary interface\n"); |
| } else if((buffer[0x41] & 0xf0) == 0x30) { |
| index = 0x46 + 3; |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: Display supports TMDS input on secondary interface\n"); |
| } else { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "LCD sense: Display does not support TMDS video interface (0x%02x)\n", |
| buffer[0x41]); |
| return 0; |
| } |
| |
| SiS_Pr->CP_Vendor = panelvendor = buffer[2] | (buffer[1] << 8); |
| SiS_Pr->CP_Product = panelproduct = buffer[3] | (buffer[4] << 8); |
| |
| paneltype = Panel_Custom; |
| SiS_Pr->CP_MaxX = SiS_Pr->CP_PreferredX = xres = buffer[0x76] | (buffer[0x77] << 8); |
| SiS_Pr->CP_MaxY = SiS_Pr->CP_PreferredY = yres = buffer[0x78] | (buffer[0x79] << 8); |
| |
| switch(xres) { |
| #if 0 |
| case 800: |
| if(yres == 600) { |
| paneltype = Panel_800x600; |
| checkexpand = TRUE; |
| } |
| break; |
| #endif |
| case 1024: |
| if(yres == 768) { |
| paneltype = Panel_1024x768; |
| checkexpand = TRUE; |
| } |
| break; |
| case 1280: |
| if(yres == 960) { |
| if(pSiS->VGAEngine == SIS_315_VGA) { |
| paneltype = Panel310_1280x960; |
| } else { |
| paneltype = Panel300_1280x960; |
| } |
| } else if(yres == 1024) { |
| paneltype = Panel_1280x1024; |
| checkexpand = TRUE; |
| } |
| /* 1280x768 treated as custom here */ |
| break; |
| case 1400: |
| if(pSiS->VGAEngine == SIS_315_VGA) { |
| if(yres == 1050) { |
| paneltype = Panel310_1400x1050; |
| checkexpand = TRUE; |
| } |
| } |
| break; |
| case 1600: |
| if(pSiS->VGAEngine == SIS_315_VGA) { |
| if(pSiS->VBFlags & VB_301C) { |
| if(yres == 1200) { |
| paneltype = Panel310_1600x1200; |
| checkexpand = TRUE; |
| } |
| } |
| } |
| break; |
| } |
| |
| /* Determine if RGB18 or RGB24 */ |
| if(index) { |
| if((buffer[index] == 0x20) || (buffer[index] == 0x34)) { |
| cr37 |= 0x01; |
| } |
| } |
| |
| if(checkexpand) { |
| /* TODO - for now, we let the panel scale */ |
| cr37 |= 0x10; |
| } |
| |
| /* Now seek 4-Byte Timing codes and extract sync pol info */ |
| index = 0x80; |
| if(buffer[0x7e] & 0x20) { /* skip Luminance Table (if provided) */ |
| lumsize = buffer[0x80] & 0x1f; |
| if(buffer[0x80] & 0x80) lumsize *= 3; |
| lumsize++; /* luminance header byte */ |
| index += lumsize; |
| } |
| #if 0 /* "pixel rate" = pixel clock? */ |
| if(buffer[0x7e] & 0x1c) { |
| for(i=0; i<((buffer[0x7e] & 0x1c) >> 2); i++) { |
| if(buffer[index + (i*8) + 6] && (buffer[index + (i*8) + 7] & 0x0f)) { |
| int clk = (buffer[index + (i*8) + 6] | ((buffer[index + (i*8) + 7] & 0x0f) << 4)) * 1000; |
| if(clk > SiS_Pr->CP_MaxClock) SiS_Pr->CP_MaxClock = clk; |
| } |
| } |
| } |
| #endif |
| index += (((buffer[0x7e] & 0x1c) >> 2) * 8); /* skip Frequency Ranges */ |
| if(buffer[0x7e] & 0x03) { |
| for(i=0; i<(buffer[0x7e] & 0x03); i++) { |
| if((buffer[index + (i*27) + 9]) || (buffer[index + (i*27) + 10])) { |
| int clk = ((buffer[index + (i*27) + 9]) | ((buffer[index + (i*27) + 9]) << 8)) * 10; |
| if(clk > SiS_Pr->CP_MaxClock) SiS_Pr->CP_MaxClock = clk; |
| } |
| } |
| } |
| index += ((buffer[0x7e] & 0x03) * 27); /* skip Detailed Range Limits */ |
| numcodes = (buffer[0x7f] & 0xf8) >> 3; |
| if(numcodes) { |
| myindex = index; |
| seekcode = (xres - 256) / 16; |
| for(i=0; i<numcodes; i++) { |
| if(buffer[myindex] == seekcode) break; |
| myindex += 4; |
| } |
| if(buffer[myindex] == seekcode) { |
| cr37 |= ((((buffer[myindex + 1] & 0x0c) ^ 0x0c) << 4) | 0x20); |
| havesync = TRUE; |
| } else { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_WARNING, |
| "LCD sense: Unable to retrieve Sync polarity information\n"); |
| } |
| } else { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_WARNING, |
| "LCD sense: Unable to retrieve Sync polarity information\n"); |
| } |
| |
| /* Check against our database; Eg. Sanyo projector reports |
| * 1024x768 in non-HDPC mode, although it supports 1280x720. |
| * Treat such wrongly reporting panels as custom. |
| */ |
| if(paneltype != Panel_Custom) { |
| int maxx, maxy, prefx, prefy; |
| if((SiS_FindPanelFromDB(pSiS, panelvendor, panelproduct, &maxx, &maxy, &prefx, &prefy))) { |
| paneltype = Panel_Custom; |
| SiS_Pr->CP_MaxX = maxx; |
| SiS_Pr->CP_MaxY = maxy; |
| cr37 |= 0x10; |
| /* Leave preferred unchanged (MUST be a valid mode!) */ |
| } |
| } |
| |
| /* Now seek the detailed timing descriptions for custom panels */ |
| if(paneltype == Panel_Custom) { |
| |
| SiS_Pr->CP_Supports64048075 = TRUE; |
| |
| index += (numcodes * 4); |
| numcodes = buffer[0x7f] & 0x07; |
| for(i=0; i<numcodes; i++, index += 18) { |
| xres = buffer[index+2] | ((buffer[index+4] & 0xf0) << 4); |
| yres = buffer[index+5] | ((buffer[index+7] & 0xf0) << 4); |
| |
| SiS_Pr->CP_HDisplay[i] = xres; |
| SiS_Pr->CP_HSyncStart[i] = xres + (buffer[index+8] | ((buffer[index+11] & 0xc0) << 2)); |
| SiS_Pr->CP_HSyncEnd[i] = SiS_Pr->CP_HSyncStart[i] + (buffer[index+9] | ((buffer[index+11] & 0x30) << 4)); |
| SiS_Pr->CP_HTotal[i] = xres + (buffer[index+3] | ((buffer[index+4] & 0x0f) << 8)); |
| SiS_Pr->CP_HBlankStart[i] = xres + 1; |
| SiS_Pr->CP_HBlankEnd[i] = SiS_Pr->CP_HTotal[i]; |
| |
| SiS_Pr->CP_VDisplay[i] = yres; |
| SiS_Pr->CP_VSyncStart[i] = yres + (((buffer[index+10] & 0xf0) >> 4) | ((buffer[index+11] & 0x0c) << 2)); |
| SiS_Pr->CP_VSyncEnd[i] = SiS_Pr->CP_VSyncStart[i] + ((buffer[index+10] & 0x0f) | ((buffer[index+11] & 0x03) << 4)); |
| SiS_Pr->CP_VTotal[i] = yres + (buffer[index+6] | ((buffer[index+7] & 0x0f) << 8)); |
| SiS_Pr->CP_VBlankStart[i] = yres + 1; |
| SiS_Pr->CP_VBlankEnd[i] = SiS_Pr->CP_VTotal[i]; |
| |
| SiS_Pr->CP_Clock[i] = (buffer[index] | (buffer[index+1] << 8)) * 10; |
| |
| SiS_Pr->CP_DataValid[i] = TRUE; |
| |
| if((SiS_Pr->CP_HDisplay[i] & 7) || |
| (SiS_Pr->CP_HDisplay[i] > SiS_Pr->CP_HSyncStart[i]) || |
| (SiS_Pr->CP_HDisplay[i] >= SiS_Pr->CP_HSyncEnd[i]) || |
| (SiS_Pr->CP_HDisplay[i] >= SiS_Pr->CP_HTotal[i]) || |
| (SiS_Pr->CP_HSyncStart[i] >= SiS_Pr->CP_HSyncEnd[i]) || |
| (SiS_Pr->CP_HSyncStart[i] > SiS_Pr->CP_HTotal[i]) || |
| (SiS_Pr->CP_HSyncEnd[i] > SiS_Pr->CP_HTotal[i]) || |
| (SiS_Pr->CP_VDisplay[i] > SiS_Pr->CP_VSyncStart[i]) || |
| (SiS_Pr->CP_VDisplay[i] >= SiS_Pr->CP_VSyncEnd[i]) || |
| (SiS_Pr->CP_VDisplay[i] >= SiS_Pr->CP_VTotal[i]) || |
| (SiS_Pr->CP_VSyncStart[i] > SiS_Pr->CP_VSyncEnd[i]) || |
| (SiS_Pr->CP_VSyncStart[i] > SiS_Pr->CP_VTotal[i]) || |
| (SiS_Pr->CP_VSyncEnd[i] > SiS_Pr->CP_VTotal[i]) || |
| (((pSiS->VBFlags & VB_301C) && (SiS_Pr->CP_Clock[i] > 162500)) || |
| ((!(pSiS->VBFlags & VB_301C)) && |
| ((SiS_Pr->CP_Clock[i] > 108200) || (SiS_Pr->CP_VDisplay[i] > 1024)))) || |
| (buffer[index + 17] & 0x80)) { |
| |
| SiS_Pr->CP_DataValid[i] = FALSE; |
| |
| } else { |
| |
| SiS_Pr->CP_HaveCustomData = TRUE; |
| |
| if(SiS_Pr->CP_Clock[i] > SiS_Pr->CP_MaxClock) SiS_Pr->CP_MaxClock = SiS_Pr->CP_Clock[i]; |
| |
| if((SiS_Pr->CP_PreferredX == xres) && (SiS_Pr->CP_PreferredY == yres)) { |
| SiS_Pr->CP_PreferredIndex = i; |
| SiS_MakeClockRegs(pSiS->pScrn, SiS_Pr->CP_Clock[i], &SiS_Pr->CP_PrefSR2B, &SiS_Pr->CP_PrefSR2C); |
| SiS_Pr->CP_PrefClock = (SiS_Pr->CP_Clock[i] / 1000) + 1; |
| if(!havesync) { |
| cr37 |= ((((buffer[index + 17] & 0x06) ^ 0x06) << 5) | 0x20); |
| havesync = TRUE; |
| } |
| } |
| |
| SiS_Pr->CP_HSync_P[i] = (buffer[index + 17] & 0x02) ? TRUE : FALSE; |
| SiS_Pr->CP_VSync_P[i] = (buffer[index + 17] & 0x04) ? TRUE : FALSE; |
| SiS_Pr->CP_SyncValid[i] = TRUE; |
| |
| } |
| } |
| |
| cr37 |= 0x10; |
| |
| } |
| |
| break; |
| |
| } |
| |
| /* 1280x960 panels are always RGB24, unable to scale and use |
| * high active sync polarity |
| */ |
| if(pSiS->VGAEngine == SIS_315_VGA) { |
| if(paneltype == Panel310_1280x960) cr37 &= 0x0e; |
| } else { |
| if(paneltype == Panel300_1280x960) cr37 &= 0x0e; |
| } |
| |
| for(i = 0; i < 7; i++) { |
| if(SiS_Pr->CP_DataValid[i]) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "Non-standard LCD/DVI-D timing data no. %d:\n", i); |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| " HDisplay %d HSync %d HSyncEnd %d HTotal %d\n", |
| SiS_Pr->CP_HDisplay[i], SiS_Pr->CP_HSyncStart[i], |
| SiS_Pr->CP_HSyncEnd[i], SiS_Pr->CP_HTotal[i]); |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| " VDisplay %d VSync %d VSyncEnd %d VTotal %d\n", |
| SiS_Pr->CP_VDisplay[i], SiS_Pr->CP_VSyncStart[i], |
| SiS_Pr->CP_VSyncEnd[i], SiS_Pr->CP_VTotal[i]); |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| " Pixel clock: %3.3fMhz\n", (float)SiS_Pr->CP_Clock[i] / 1000); |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_INFO, |
| " To use this, add \"%dx%d\" to the list of Modes in the Screen section\n", |
| SiS_Pr->CP_HDisplay[i], |
| SiS_Pr->CP_VDisplay[i]); |
| } |
| } |
| |
| if(paneltype) { |
| if(!SiS_Pr->CP_PreferredX) SiS_Pr->CP_PreferredX = SiS_Pr->CP_MaxX; |
| if(!SiS_Pr->CP_PreferredY) SiS_Pr->CP_PreferredY = SiS_Pr->CP_MaxY; |
| SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x32,0x08); |
| SiS_SetReg(SiS_Pr->SiS_P3d4,0x36,paneltype); |
| cr37 &= 0xf1; |
| SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x37,0x0c,cr37); |
| SiS_Pr->PanelSelfDetected = TRUE; |
| #ifdef TWDEBUG |
| xf86DrvMsgVerb(pSiS->pScrn->scrnIndex, X_PROBED, 3, |
| "LCD sense: [DDC LCD results: 0x%02x, 0x%02x]\n", paneltype, cr37); |
| #endif |
| } else { |
| SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x32,~0x08); |
| SiS_SetReg(SiS_Pr->SiS_P3d4,0x36,0x00); |
| } |
| return 0; |
| } |
| |
| USHORT |
| SiS_SenseVGA2DDC(SiS_Private *SiS_Pr, SISPtr pSiS) |
| { |
| USHORT DDCdatatype,flag; |
| BOOLEAN foundcrt = FALSE; |
| int retry; |
| unsigned char buffer[256]; |
| |
| if(!(pSiS->VBFlags & (VB_301|VB_301B|VB_301C|VB_302B))) return 0; |
| |
| if(SiS_InitDDCRegs(SiS_Pr, pSiS->VBFlags, pSiS->VGAEngine, 2, 0, FALSE) == 0xFFFF) return 0; |
| |
| SiS_Pr->SiS_DDC_SecAddr = 0x00; |
| |
| /* Probe supported DA's */ |
| flag = SiS_ProbeDDC(SiS_Pr); |
| if(flag & 0x10) { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa6; /* EDID V2 (FP) */ |
| DDCdatatype = 4; |
| } else if(flag & 0x08) { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa2; /* EDID V2 (P&D-D Monitor) */ |
| DDCdatatype = 3; |
| } else if(flag & 0x02) { |
| SiS_Pr->SiS_DDC_DeviceAddr = 0xa0; /* EDID V1 */ |
| DDCdatatype = 1; |
| } else { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "VGA2 sense: Do DDC answer\n"); |
| return 0; /* no DDC support (or no device attached) */ |
| } |
| |
| /* Read the entire EDID */ |
| retry = 2; |
| do { |
| if(SiS_ReadDDC(SiS_Pr, DDCdatatype, buffer)) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_PROBED, |
| "VGA2 sense: DDC read failed (attempt %d), %s\n", |
| (3-retry), (retry == 1) ? "giving up" : "retrying"); |
| retry--; |
| if(retry == 0) return 0xFFFF; |
| } else break; |
| } while(1); |
| |
| /* Analyze EDID. We don't have many chances to |
| * distinguish a flat panel from a CRT... |
| */ |
| switch(DDCdatatype) { |
| case 1: |
| if(!(checkedid1(buffer))) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_ERROR, |
| "VGA2 sense: EDID corrupt\n"); |
| return 0; |
| } |
| if(buffer[0x14] & 0x80) { /* Display uses digital input */ |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_ERROR, |
| "VGA2 sense: Attached display expects digital input\n"); |
| return 0; |
| } |
| SiS_Pr->CP_Vendor = buffer[9] | (buffer[8] << 8); |
| SiS_Pr->CP_Product = buffer[10] | (buffer[11] << 8); |
| foundcrt = TRUE; |
| break; |
| case 3: |
| case 4: |
| if(!(checkedid2(buffer))) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_ERROR, |
| "VGA2 sense: EDID corrupt\n"); |
| return 0; |
| } |
| if( ((buffer[0x41] & 0x0f) != 0x01) && /* Display does not support analog input */ |
| ((buffer[0x41] & 0x0f) != 0x02) && |
| ((buffer[0x41] & 0xf0) != 0x10) && |
| ((buffer[0x41] & 0xf0) != 0x20) ) { |
| xf86DrvMsg(pSiS->pScrn->scrnIndex, X_ERROR, |
| "VGA2 sense: Attached display does not support analog input (0x%02x)\n", |
| buffer[0x41]); |
| return 0; |
| } |
| SiS_Pr->CP_Vendor = buffer[2] | (buffer[1] << 8); |
| SiS_Pr->CP_Product = buffer[3] | (buffer[4] << 8); |
| foundcrt = TRUE; |
| break; |
| } |
| |
| if(foundcrt) { |
| SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x32,0x10); |
| } |
| return(0); |
| } |
| |
| #endif |
| |
| void |
| SiS_SetCH70xxANDOR(SiS_Private *SiS_Pr, USHORT tempax,USHORT tempbh) |
| { |
| USHORT tempbl; |
| |
| tempbl = SiS_GetCH70xx(SiS_Pr,(tempax & 0x00FF)); |
| tempbl = (((tempbl & tempbh) << 8) | tempax); |
| SiS_SetCH70xx(SiS_Pr,tempbl); |
| } |
| |
| /* Generic I2C functions for Chrontel & DDC --------- */ |
| |
| static void |
| SiS_SetSwitchDDC2(SiS_Private *SiS_Pr) |
| { |
| SiS_SetSCLKHigh(SiS_Pr); |
| SiS_WaitRetrace1(SiS_Pr); |
| |
| SiS_SetSCLKLow(SiS_Pr); |
| SiS_WaitRetrace1(SiS_Pr); |
| } |
| |
| USHORT |
| SiS_ReadDDC1Bit(SiS_Private *SiS_Pr) |
| { |
| SiS_WaitRetrace1(SiS_Pr); |
| return((SiS_GetReg(SiS_Pr->SiS_P3c4,0x11) & 0x02) >> 1); |
| } |
| |
| /* Set I2C start condition */ |
| /* This is done by a SD high-to-low transition while SC is high */ |
| static USHORT |
| SiS_SetStart(SiS_Private *SiS_Pr) |
| { |
| if(SiS_SetSCLKLow(SiS_Pr)) return 0xFFFF; /* (SC->low) */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| SiS_Pr->SiS_DDC_Data); /* SD->high */ |
| if(SiS_SetSCLKHigh(SiS_Pr)) return 0xFFFF; /* SC->high */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| 0x00); /* SD->low = start condition */ |
| if(SiS_SetSCLKHigh(SiS_Pr)) return 0xFFFF; /* (SC->low) */ |
| return 0; |
| } |
| |
| /* Set I2C stop condition */ |
| /* This is done by a SD low-to-high transition while SC is high */ |
| static USHORT |
| SiS_SetStop(SiS_Private *SiS_Pr) |
| { |
| if(SiS_SetSCLKLow(SiS_Pr)) return 0xFFFF; /* (SC->low) */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| 0x00); /* SD->low */ |
| if(SiS_SetSCLKHigh(SiS_Pr)) return 0xFFFF; /* SC->high */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| SiS_Pr->SiS_DDC_Data); /* SD->high = stop condition */ |
| if(SiS_SetSCLKHigh(SiS_Pr)) return 0xFFFF; /* (SC->high) */ |
| return 0; |
| } |
| |
| /* Write 8 bits of data */ |
| static USHORT |
| SiS_WriteDDC2Data(SiS_Private *SiS_Pr, USHORT tempax) |
| { |
| USHORT i,flag,temp; |
| |
| flag = 0x80; |
| for(i=0; i<8; i++) { |
| SiS_SetSCLKLow(SiS_Pr); /* SC->low */ |
| if(tempax & flag) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| SiS_Pr->SiS_DDC_Data); /* Write bit (1) to SD */ |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| 0x00); /* Write bit (0) to SD */ |
| } |
| SiS_SetSCLKHigh(SiS_Pr); /* SC->high */ |
| flag >>= 1; |
| } |
| temp = SiS_CheckACK(SiS_Pr); /* Check acknowledge */ |
| return(temp); |
| } |
| |
| static USHORT |
| SiS_ReadDDC2Data(SiS_Private *SiS_Pr, USHORT tempax) |
| { |
| USHORT i,temp,getdata; |
| |
| getdata=0; |
| for(i=0; i<8; i++) { |
| getdata <<= 1; |
| SiS_SetSCLKLow(SiS_Pr); |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| SiS_Pr->SiS_DDC_Data); |
| SiS_SetSCLKHigh(SiS_Pr); |
| temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index); |
| if(temp & SiS_Pr->SiS_DDC_Data) getdata |= 0x01; |
| } |
| return(getdata); |
| } |
| |
| static USHORT |
| SiS_SetSCLKLow(SiS_Private *SiS_Pr) |
| { |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NClk, |
| 0x00); /* SetSCLKLow() */ |
| SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT); |
| return 0; |
| } |
| |
| static USHORT |
| SiS_SetSCLKHigh(SiS_Private *SiS_Pr) |
| { |
| USHORT temp, watchdog=1000; |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NClk, |
| SiS_Pr->SiS_DDC_Clk); /* SetSCLKHigh() */ |
| do { |
| temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index); |
| } while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog); |
| if (!watchdog) { |
| #ifdef TWDEBUG |
| xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n"); |
| #endif |
| return 0xFFFF; |
| } |
| SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT); |
| return 0; |
| } |
| |
| /* Check I2C acknowledge */ |
| /* Returns 0 if ack ok, non-0 if ack not ok */ |
| static USHORT |
| SiS_CheckACK(SiS_Private *SiS_Pr) |
| { |
| USHORT tempah; |
| |
| SiS_SetSCLKLow(SiS_Pr); /* (SC->low) */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_DDC_Port, |
| SiS_Pr->SiS_DDC_Index, |
| SiS_Pr->SiS_DDC_NData, |
| SiS_Pr->SiS_DDC_Data); /* (SD->high) */ |
| SiS_SetSCLKHigh(SiS_Pr); /* SC->high = clock impulse for ack */ |
| tempah = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index); /* Read SD */ |
| SiS_SetSCLKLow(SiS_Pr); /* SC->low = end of clock impulse */ |
| if(tempah & SiS_Pr->SiS_DDC_Data) return(1); /* Ack OK if bit = 0 */ |
| else return(0); |
| } |
| |
| /* End of I2C functions ----------------------- */ |
| |
| |
| /* =============== SiS 315/330 O.E.M. ================= */ |
| |
| #ifdef SIS315H |
| |
| static USHORT |
| GetRAMDACromptr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT romptr; |
| |
| if(HwInfo->jChipType < SIS_330) { |
| romptr = SISGETROMW(0x128); |
| if(SiS_Pr->SiS_VBType & VB_SIS301B302B) |
| romptr = SISGETROMW(0x12a); |
| } else { |
| romptr = SISGETROMW(0x1a8); |
| if(SiS_Pr->SiS_VBType & VB_SIS301B302B) |
| romptr = SISGETROMW(0x1aa); |
| } |
| return(romptr); |
| } |
| |
| static USHORT |
| GetLCDromptr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT romptr; |
| |
| if(HwInfo->jChipType < SIS_330) { |
| romptr = SISGETROMW(0x120); |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) |
| romptr = SISGETROMW(0x122); |
| } else { |
| romptr = SISGETROMW(0x1a0); |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) |
| romptr = SISGETROMW(0x1a2); |
| } |
| return(romptr); |
| } |
| |
| static USHORT |
| GetTVromptr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT romptr; |
| |
| if(HwInfo->jChipType < SIS_330) { |
| romptr = SISGETROMW(0x114); |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) |
| romptr = SISGETROMW(0x11a); |
| } else { |
| romptr = SISGETROMW(0x194); |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) |
| romptr = SISGETROMW(0x19a); |
| } |
| return(romptr); |
| } |
| |
| static USHORT |
| GetLCDPtrIndexBIOS(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| USHORT index; |
| |
| if((IS_SIS650) && (SiS_Pr->SiS_VBType & VB_SIS301LV302LV)) { |
| if(!(SiS_IsNotM650orLater(SiS_Pr, HwInfo))) { |
| if((index = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) & 0xf0)) { |
| index >>= 4; |
| index *= 3; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) index += 2; |
| else if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) index++; |
| return index; |
| } |
| } |
| } |
| |
| index = SiS_GetBIOSLCDResInfo(SiS_Pr) & 0x0F; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) index -= 5; |
| else if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) index -= 6; |
| index--; |
| index *= 3; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) index += 2; |
| else if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) index++; |
| return index; |
| } |
| |
| static USHORT |
| GetLCDPtrIndex(SiS_Private *SiS_Pr) |
| { |
| USHORT index; |
| |
| index = ((SiS_GetBIOSLCDResInfo(SiS_Pr) & 0x0F) - 1) * 3; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) index += 2; |
| else if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) index++; |
| return index; |
| } |
| |
| static USHORT |
| GetTVPtrIndex(SiS_Private *SiS_Pr) |
| { |
| USHORT index; |
| |
| index = 0; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) index = 1; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) index = 2; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToYPbPr525750) index = 0; |
| |
| index <<= 1; |
| |
| if((SiS_Pr->SiS_VBInfo & SetInSlaveMode) && |
| (SiS_Pr->SiS_TVMode & TVSetTVSimuMode)) { |
| index++; |
| } |
| |
| return index; |
| } |
| |
| static ULONG |
| GetOEMTVPtr661_2_GEN(SiS_Private *SiS_Pr, int addme) |
| { |
| USHORT index = 0, temp = 0; |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) index = 1; |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) index = 2; |
| if(SiS_Pr->SiS_TVMode & TVSetPALN) index = 3; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) index = 6; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSC1024) { |
| index = 4; |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) index++; |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) index = 7; |
| } |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if((!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) || |
| (SiS_Pr->SiS_TVMode & TVSetTVSimuMode)) { |
| index += addme; |
| temp++; |
| } |
| temp += 0x0100; |
| } |
| return(ULONG)(index | (temp << 16)); |
| } |
| |
| static ULONG |
| GetOEMTVPtr661_2_OLD(SiS_Private *SiS_Pr) |
| { |
| return(GetOEMTVPtr661_2_GEN(SiS_Pr, 8)); |
| } |
| |
| #if 0 |
| static ULONG |
| GetOEMTVPtr661_2_NEW(SiS_Private *SiS_Pr) |
| { |
| return(GetOEMTVPtr661_2_GEN(SiS_Pr, 6)); |
| } |
| #endif |
| |
| static int |
| GetOEMTVPtr661(SiS_Private *SiS_Pr) |
| { |
| int index = 0; |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) index = 2; |
| if(SiS_Pr->SiS_ROMNew) { |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525i) index = 4; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) index = 6; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) index = 8; |
| if(SiS_Pr->SiS_TVMode & TVSetHiVision) index = 10; |
| } else { |
| if(SiS_Pr->SiS_TVMode & TVSetHiVision) index = 4; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525i) index = 6; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr525p) index = 8; |
| if(SiS_Pr->SiS_TVMode & TVSetYPbPr750p) index = 10; |
| } |
| |
| if(SiS_Pr->SiS_TVMode & TVSetTVSimuMode) index++; |
| |
| return index; |
| } |
| |
| static void |
| SetDelayComp(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT ModeNo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT delay=0,index,myindex,temp,romptr=0; |
| BOOLEAN dochiptest = TRUE; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x20,0xbf); |
| } else { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x35,0x7f); |
| } |
| |
| /* Find delay (from ROM, internal tables, PCI subsystem) */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC) { /* ------------ VGA */ |
| |
| if((SiS_Pr->SiS_UseROM) && (!(SiS_Pr->SiS_ROMNew))) { |
| romptr = GetRAMDACromptr(SiS_Pr, HwInfo); |
| } |
| if(romptr) delay = ROMAddr[romptr]; |
| else { |
| delay = 0x04; |
| if(SiS_Pr->SiS_VBType & VB_SIS301B302B) { |
| if(IS_SIS650) { |
| delay = 0x0a; |
| } else if(IS_SIS740) { |
| delay = 0x00; |
| } else if(HwInfo->jChipType < SIS_330) { |
| delay = 0x0c; |
| } else { |
| delay = 0x0c; |
| } |
| } else if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| delay = 0x00; |
| } |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD|SetCRT2ToLCDA)) { /* ---------- LCD/LCDA */ |
| |
| BOOLEAN gotitfrompci = FALSE; |
| |
| /* Could we detect a PDC for LCD or did we get a user-defined? If yes, use it */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| if(SiS_Pr->PDC != -1) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0xf0,((SiS_Pr->PDC >> 1) & 0x0f)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x35,0x7f,((SiS_Pr->PDC & 0x01) << 7)); |
| return; |
| } |
| } else { |
| if(SiS_Pr->PDCA != -1) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0x0f,((SiS_Pr->PDCA << 3) & 0xf0)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x20,0xbf,((SiS_Pr->PDCA & 0x01) << 6)); |
| return; |
| } |
| } |
| |
| /* Custom Panel? */ |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_Custom) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| delay = 0x00; |
| if((SiS_Pr->PanelXRes <= 1280) && (SiS_Pr->PanelYRes <= 1024)) { |
| delay = 0x20; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0x0f,delay); |
| } else { |
| delay = 0x0c; |
| if(SiS_Pr->SiS_VBType & VB_SIS301C) delay = 0x03; |
| else if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| if(IS_SIS740) delay = 0x01; |
| else delay = 0x03; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0xf0,delay); |
| } |
| return; |
| } |
| |
| /* This is a piece of typical SiS crap: They code the OEM LCD |
| * delay into the code, at no defined place in the BIOS. |
| * We now have to start doing a PCI subsystem check here. |
| */ |
| |
| switch(SiS_Pr->SiS_CustomT) { |
| case CUT_COMPAQ1280: |
| case CUT_COMPAQ12802: |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| gotitfrompci = TRUE; |
| dochiptest = FALSE; |
| delay = 0x03; |
| } |
| break; |
| case CUT_CLEVO1400: |
| case CUT_CLEVO14002: |
| gotitfrompci = TRUE; |
| dochiptest = FALSE; |
| delay = 0x02; |
| break; |
| case CUT_CLEVO1024: |
| case CUT_CLEVO10242: |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| gotitfrompci = TRUE; |
| dochiptest = FALSE; |
| delay = 0x33; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2D,delay); |
| delay &= 0x0f; |
| } |
| break; |
| } |
| |
| /* Could we find it through the PCI ID? If no, use ROM or table */ |
| |
| if(!gotitfrompci) { |
| |
| index = GetLCDPtrIndexBIOS(SiS_Pr, HwInfo); |
| myindex = GetLCDPtrIndex(SiS_Pr); |
| |
| if(IS_SIS650 && (SiS_Pr->SiS_VBType & VB_SIS301LV302LV)) { |
| |
| if(SiS_IsNotM650orLater(SiS_Pr, HwInfo)) { |
| |
| if((SiS_Pr->SiS_UseROM) && (!(SiS_Pr->SiS_ROMNew))) { |
| /* Always use the second pointer on 650; some BIOSes */ |
| /* still carry old 301 data at the first location */ |
| /* romptr = SISGETROMW(0x120); */ |
| /* if(SiS_Pr->SiS_VBType & VB_SIS302LV) */ |
| romptr = SISGETROMW(0x122); |
| if(!romptr) return; |
| delay = ROMAddr[(romptr + index)]; |
| } else { |
| delay = SiS310_LCDDelayCompensation_650301LV[myindex]; |
| } |
| |
| } else { |
| |
| delay = SiS310_LCDDelayCompensation_651301LV[myindex]; |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) |
| delay = SiS310_LCDDelayCompensation_651302LV[myindex]; |
| |
| } |
| |
| } else if(SiS_Pr->SiS_UseROM && |
| (!(SiS_Pr->SiS_ROMNew)) && |
| (SiS_Pr->SiS_LCDResInfo != Panel_1280x1024) && |
| (SiS_Pr->SiS_LCDResInfo != Panel_1280x768) && |
| (SiS_Pr->SiS_LCDResInfo != Panel_1280x960)) { |
| |
| /* Data for 1280x1024 wrong in 301B BIOS */ |
| romptr = GetLCDromptr(SiS_Pr, HwInfo); |
| if(!romptr) return; |
| delay = ROMAddr[(romptr + index)]; |
| |
| } else if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| |
| if(IS_SIS740) delay = 0x03; |
| else delay = 0x00; |
| |
| } else { |
| |
| delay = SiS310_LCDDelayCompensation_301[myindex]; |
| if(SiS_Pr->SiS_VBType & VB_SIS301LV302LV) { |
| if(IS_SIS740) delay = 0x01; |
| else if(HwInfo->jChipType <= SIS_315PRO) delay = SiS310_LCDDelayCompensation_3xx301LV[myindex]; |
| else delay = SiS310_LCDDelayCompensation_650301LV[myindex]; |
| } else if(SiS_Pr->SiS_VBType & VB_SIS301C) { |
| if(IS_SIS740) delay = 0x01; /* ? */ |
| else delay = 0x03; |
| } else if(SiS_Pr->SiS_VBType & VB_SIS301B302B) { |
| if(IS_SIS740) delay = 0x01; |
| else delay = SiS310_LCDDelayCompensation_3xx301B[myindex]; |
| } |
| |
| } |
| |
| } /* got it from PCI */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2D,0x0F,((delay << 4) & 0xf0)); |
| dochiptest = FALSE; |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { /* ------------ TV */ |
| |
| index = GetTVPtrIndex(SiS_Pr); |
| |
| if(IS_SIS650 && (SiS_Pr->SiS_VBType & VB_SIS301LV302LV)) { |
| |
| if(SiS_IsNotM650orLater(SiS_Pr,HwInfo)) { |
| |
| if((SiS_Pr->SiS_UseROM) && (!(SiS_Pr->SiS_ROMNew))) { |
| /* Always use the second pointer on 650; some BIOSes */ |
| /* still carry old 301 data at the first location */ |
| /* romptr = SISGETROMW(0x114); */ |
| /* if(SiS_Pr->SiS_VBType & VB_SIS302LV) */ |
| romptr = SISGETROMW(0x11a); |
| if(!romptr) return; |
| delay = ROMAddr[romptr + index]; |
| |
| } else { |
| |
| delay = SiS310_TVDelayCompensation_301B[index]; |
| |
| } |
| |
| } else { |
| |
| switch(SiS_Pr->SiS_CustomT) { |
| case CUT_COMPAQ1280: |
| case CUT_COMPAQ12802: |
| case CUT_CLEVO1400: |
| case CUT_CLEVO14002: |
| delay = 0x02; |
| dochiptest = FALSE; |
| break; |
| case CUT_CLEVO1024: |
| case CUT_CLEVO10242: |
| delay = 0x03; |
| dochiptest = FALSE; |
| break; |
| default: |
| delay = SiS310_TVDelayCompensation_651301LV[index]; |
| if(SiS_Pr->SiS_VBType & VB_SIS302LV) { |
| delay = SiS310_TVDelayCompensation_651302LV[index]; |
| } |
| } |
| } |
| |
| } else if((SiS_Pr->SiS_UseROM) && (!(SiS_Pr->SiS_ROMNew))) { |
| |
| romptr = GetTVromptr(SiS_Pr, HwInfo); |
| if(!romptr) return; |
| delay = ROMAddr[romptr + index]; |
| |
| } else if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| |
| delay = SiS310_TVDelayCompensation_LVDS[index]; |
| |
| } else { |
| |
| delay = SiS310_TVDelayCompensation_301[index]; |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| if(IS_SIS740) { |
| delay = SiS310_TVDelayCompensation_740301B[index]; |
| /* LV: use 301 data? BIOS bug? */ |
| } else { |
| delay = SiS310_TVDelayCompensation_301B[index]; |
| if(SiS_Pr->SiS_VBType & VB_SIS301C) delay = 0x02; |
| } |
| } |
| |
| } |
| |
| if(SiS_LCDAEnabled(SiS_Pr, HwInfo)) { |
| delay &= 0x0f; |
| dochiptest = FALSE; |
| } |
| |
| } else return; |
| |
| /* Write delay */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| if(IS_SIS650 && (SiS_Pr->SiS_VBType & VB_SIS301LV302LV) && dochiptest) { |
| |
| temp = (SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) & 0xf0) >> 4; |
| if(temp == 8) { /* 1400x1050 BIOS (COMPAL) */ |
| delay &= 0x0f; |
| delay |= 0xb0; |
| } else if(temp == 6) { |
| delay &= 0x0f; |
| delay |= 0xc0; |
| } else if(temp > 7) { /* 1280x1024 BIOS (which one?) */ |
| delay = 0x35; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2D,delay); |
| |
| } else { |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2D,0xF0,delay); |
| |
| } |
| |
| } else { /* LVDS */ |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2D,0xF0,delay); |
| } else { |
| if(IS_SIS650 && (SiS_Pr->SiS_IF_DEF_CH70xx != 0)) { |
| delay <<= 4; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2D,0x0F,delay); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2D,0xF0,delay); |
| } |
| } |
| |
| } |
| |
| } |
| |
| static void |
| SetAntiFlicker(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,temp1,romptr=0; |
| |
| if(SiS_Pr->SiS_TVMode & (TVSetYPbPr750p|TVSetYPbPr525p)) return; |
| |
| if(ModeNo<=0x13) |
| index = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].VB_StTVFlickerIndex; |
| else |
| index = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].VB_ExtTVFlickerIndex; |
| |
| temp = GetTVPtrIndex(SiS_Pr); |
| temp >>= 1; /* 0: NTSC/YPbPr, 1: PAL, 2: HiTV */ |
| temp1 = temp; |
| |
| if(SiS_Pr->SiS_UseROM && (!(SiS_Pr->SiS_ROMNew))) { |
| if(HwInfo->jChipType >= SIS_661) { |
| temp1 = GetOEMTVPtr661(SiS_Pr); |
| temp1 >>= 1; |
| romptr = SISGETROMW(0x260); |
| if(HwInfo->jChipType >= SIS_760) { |
| romptr = SISGETROMW(0x360); |
| } |
| } else if(HwInfo->jChipType >= SIS_330) { |
| romptr = SISGETROMW(0x192); |
| } else { |
| romptr = SISGETROMW(0x112); |
| } |
| } |
| |
| if(romptr) { |
| temp1 <<= 1; |
| temp = ROMAddr[romptr + temp1 + index]; |
| } else { |
| temp = SiS310_TVAntiFlick1[temp][index]; |
| } |
| temp <<= 4; |
| |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x0A,0x8f,temp); /* index 0A D[6:4] */ |
| } |
| |
| static void |
| SetEdgeEnhance(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,temp1,romptr=0; |
| |
| temp = temp1 = GetTVPtrIndex(SiS_Pr) >> 1; /* 0: NTSC/YPbPr, 1: PAL, 2: HiTV */ |
| |
| if(ModeNo <= 0x13) |
| index = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].VB_StTVEdgeIndex; |
| else |
| index = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].VB_ExtTVEdgeIndex; |
| |
| if(SiS_Pr->SiS_UseROM && (!(SiS_Pr->SiS_ROMNew))) { |
| if(HwInfo->jChipType >= SIS_661) { |
| romptr = SISGETROMW(0x26c); |
| if(HwInfo->jChipType >= SIS_760) { |
| romptr = SISGETROMW(0x36c); |
| } |
| temp1 = GetOEMTVPtr661(SiS_Pr); |
| temp1 >>= 1; |
| } else if(HwInfo->jChipType >= SIS_330) { |
| romptr = SISGETROMW(0x1a4); |
| } else { |
| romptr = SISGETROMW(0x124); |
| } |
| } |
| |
| if(romptr) { |
| temp1 <<= 1; |
| temp = ROMAddr[romptr + temp1 + index]; |
| } else { |
| temp = SiS310_TVEdge1[temp][index]; |
| } |
| temp <<= 5; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x3A,0x1F,temp); /* index 0A D[7:5] */ |
| } |
| |
| static void |
| SetYFilter(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| USHORT index, temp, i, j; |
| |
| if(ModeNo <= 0x13) { |
| index = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].VB_StTVYFilterIndex; |
| } else { |
| index = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].VB_ExtTVYFilterIndex; |
| } |
| |
| temp = GetTVPtrIndex(SiS_Pr) >> 1; /* 0: NTSC/YPbPr, 1: PAL, 2: HiTV */ |
| |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) temp = 1; /* NTSC-J uses PAL */ |
| else if(SiS_Pr->SiS_TVMode & TVSetPALM) temp = 3; /* PAL-M */ |
| else if(SiS_Pr->SiS_TVMode & TVSetPALN) temp = 4; /* PAL-N */ |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) temp = 1; /* HiVision uses PAL */ |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| for(i=0x35, j=0; i<=0x38; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS310_TVYFilter2[temp][index][j]); |
| } |
| for(i=0x48; i<=0x4A; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS310_TVYFilter2[temp][index][j]); |
| } |
| } else { |
| for(i=0x35, j=0; i<=0x38; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS310_TVYFilter1[temp][index][j]); |
| } |
| } |
| } |
| |
| static void |
| SetPhaseIncr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,i,j,resinfo,romptr=0; |
| ULONG lindex; |
| |
| if(!(SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) return; |
| |
| /* NTSC-J data not in BIOS, and already set in SetGroup2 */ |
| if(SiS_Pr->SiS_TVMode & TVSetNTSCJ) return; |
| |
| if((HwInfo->jChipType >= SIS_661) || SiS_Pr->SiS_ROMNew) { |
| lindex = GetOEMTVPtr661_2_OLD(SiS_Pr) & 0xffff; |
| lindex <<= 2; |
| for(j=0, i=0x31; i<=0x34; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS661_TVPhase[lindex + j]); |
| } |
| return; |
| } |
| |
| /* PAL-M, PAL-N not in BIOS, and already set in SetGroup2 */ |
| if(SiS_Pr->SiS_TVMode & (TVSetPALM | TVSetPALN)) return; |
| |
| if(ModeNo<=0x13) { |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| } else { |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| } |
| |
| temp = GetTVPtrIndex(SiS_Pr); |
| /* 0: NTSC Graphics, 1: NTSC Text, 2: PAL Graphics, |
| * 3: PAL Text, 4: HiTV Graphics 5: HiTV Text |
| */ |
| if(SiS_Pr->SiS_UseROM) { |
| romptr = SISGETROMW(0x116); |
| if(HwInfo->jChipType >= SIS_330) { |
| romptr = SISGETROMW(0x196); |
| } |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| romptr = SISGETROMW(0x11c); |
| if(HwInfo->jChipType >= SIS_330) { |
| romptr = SISGETROMW(0x19c); |
| } |
| if((SiS_Pr->SiS_VBInfo & SetInSlaveMode) && (!(SiS_Pr->SiS_TVMode & TVSetTVSimuMode))) { |
| romptr = SISGETROMW(0x116); |
| if(HwInfo->jChipType >= SIS_330) { |
| romptr = SISGETROMW(0x196); |
| } |
| } |
| } |
| } |
| if(romptr) { |
| romptr += (temp << 2); |
| for(j=0, i=0x31; i<=0x34; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,ROMAddr[romptr + j]); |
| } |
| } else { |
| index = temp % 2; |
| temp >>= 1; /* 0:NTSC, 1:PAL, 2:HiTV */ |
| for(j=0, i=0x31; i<=0x34; i++, j++) { |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV)) |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS310_TVPhaseIncr1[temp][index][j]); |
| else if((!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) || (SiS_Pr->SiS_TVMode & TVSetTVSimuMode)) |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS310_TVPhaseIncr2[temp][index][j]); |
| else |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS310_TVPhaseIncr1[temp][index][j]); |
| } |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) && (!(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision))) { |
| if((!(SiS_Pr->SiS_TVMode & (TVSetPAL | TVSetYPbPr525p | TVSetYPbPr750p))) && (ModeNo > 0x13)) { |
| if((resinfo == SIS_RI_640x480) || |
| (resinfo == SIS_RI_800x600)) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x31,0x21); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x32,0xf0); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x33,0xf5); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x34,0x7f); |
| } else if(resinfo == SIS_RI_1024x768) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x31,0x1e); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x32,0x8b); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x33,0xfb); |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x34,0x7b); |
| } |
| } |
| } |
| } |
| |
| static void |
| SetDelayComp661(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT ModeNo, |
| USHORT ModeIdIndex, USHORT RTI) |
| { |
| USHORT delay = 0, romptr = 0, index, lcdpdcindex; |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| |
| if(!(SiS_Pr->SiS_VBInfo & (SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToRAMDAC))) |
| return; |
| |
| /* 1. New ROM: VGA2 and LCD/LCDA-Pass1:1 */ |
| /* (If a custom mode is used, Pass1:1 is always set; hence we do this:) */ |
| |
| if(SiS_Pr->SiS_ROMNew) { |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToRAMDAC) || |
| ((SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) && |
| (SiS_Pr->SiS_LCDInfo & LCDPass11))) { |
| index = 25; |
| if(SiS_Pr->UseCustomMode) { |
| index = SiS_Pr->CSRClock; |
| } else if(ModeNo > 0x13) { |
| index = SiS_GetVCLK2Ptr(SiS_Pr,ModeNo,ModeIdIndex,RTI,HwInfo); |
| index = SiS_Pr->SiS_VCLKData[index].CLOCK; |
| } |
| if(index < 25) index = 25; |
| index = ((index / 25) - 1) << 1; |
| if((ROMAddr[0x5b] & 0x80) || (SiS_Pr->SiS_VBInfo & (SetCRT2ToRAMDAC | SetCRT2ToLCD))) { |
| index++; |
| } |
| romptr = SISGETROMW(0x104); |
| delay = ROMAddr[romptr + index]; |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToRAMDAC | SetCRT2ToLCD)) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0xf0,((delay >> 1) & 0x0f)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x35,0x7f,((delay & 0x01) << 7)); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0x0f,((delay << 3) & 0xf0)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x20,0xbf,((delay & 0x01) << 6)); |
| } |
| return; |
| } |
| } |
| |
| /* 2. Old ROM: VGA2 and LCD/LCDA-Pass 1:1 */ |
| |
| if(SiS_Pr->UseCustomMode) delay = 0x04; |
| else if(ModeNo <= 0x13) delay = 0x04; |
| else delay = (SiS_Pr->SiS_RefIndex[RTI].Ext_PDC >> 4); |
| delay |= (delay << 8); |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| |
| /* 3. TV */ |
| |
| index = GetOEMTVPtr661(SiS_Pr); |
| if(SiS_Pr->SiS_ROMNew) { |
| romptr = SISGETROMW(0x106); |
| if(SiS_Pr->SiS_VBType & VB_UMC) romptr += 12; |
| delay = ROMAddr[romptr + index]; |
| } else { |
| delay = 0x04; |
| if(index > 3) delay = 0; |
| } |
| |
| } else if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| |
| /* 4. LCD, LCDA (for new ROM only LV and non-Pass 1:1) */ |
| |
| if( (SiS_Pr->SiS_LCDResInfo != Panel_Custom) && |
| ((romptr = GetLCDStructPtr661_2(SiS_Pr, HwInfo))) ) { |
| |
| lcdpdcindex = (SiS_Pr->SiS_VBType & VB_UMC) ? 14 : 12; |
| |
| /* For LVDS (and sometimes TMDS), the BIOS must know about the correct value */ |
| delay = ROMAddr[romptr + lcdpdcindex + 1]; /* LCD */ |
| delay |= (ROMAddr[romptr + lcdpdcindex] << 8); /* LCDA */ |
| |
| } else { |
| |
| /* TMDS: Set our own, since BIOS has no idea */ |
| /* (This is done on >=661 only, since <661 is calling this only for LVDS) */ |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| switch(SiS_Pr->SiS_LCDResInfo) { |
| case Panel_1024x768: delay = 0x0008; break; |
| case Panel_1280x720: delay = 0x0004; break; |
| case Panel_1280x768: |
| case Panel_1280x768_2:delay = 0x0004; break; |
| case Panel_1280x800: |
| case Panel_1280x800_2:delay = 0x0004; break; /* Verified for 1280x800 */ |
| case Panel_1280x1024: delay = 0x1e04; break; |
| case Panel_1400x1050: delay = 0x0004; break; |
| case Panel_1600x1200: delay = 0x0400; break; |
| case Panel_1680x1050: delay = 0x0e04; break; |
| default: |
| if((SiS_Pr->PanelXRes <= 1024) && (SiS_Pr->PanelYRes <= 768)) { |
| delay = 0x0008; |
| } else if((SiS_Pr->PanelXRes == 1280) && (SiS_Pr->PanelYRes == 1024)) { |
| delay = 0x1e04; |
| } else if((SiS_Pr->PanelXRes <= 1400) && (SiS_Pr->PanelYRes <= 1050)) { |
| delay = 0x0004; |
| } else if((SiS_Pr->PanelXRes <= 1600) && (SiS_Pr->PanelYRes <= 1200)) { |
| delay = 0x0400; |
| } else |
| delay = 0x0e04; |
| break; |
| } |
| } |
| |
| /* Override by detected or user-set values */ |
| /* (but only if, for some reason, we can't read value from BIOS) */ |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && (SiS_Pr->PDC != -1)) { |
| delay = SiS_Pr->PDC & 0x1f; |
| } |
| if((SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) && (SiS_Pr->PDCA != -1)) { |
| delay = (SiS_Pr->PDCA & 0x1f) << 8; |
| } |
| |
| } |
| |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| delay >>= 8; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0x0f,((delay << 3) & 0xf0)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x20,0xbf,((delay & 0x01) << 6)); |
| } else { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2d,0xf0,((delay >> 1) & 0x0f)); |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x35,0x7f,((delay & 0x01) << 7)); |
| } |
| } |
| |
| static void |
| SetCRT2SyncDither661(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, USHORT ModeNo, USHORT RTI) |
| { |
| USHORT infoflag; |
| UCHAR temp; |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| |
| if(ModeNo <= 0x13) { |
| infoflag = SiS_GetRegByte(SiS_Pr->SiS_P3ca+2); |
| } else if(SiS_Pr->UseCustomMode) { |
| infoflag = SiS_Pr->CInfoFlag; |
| } else { |
| infoflag = SiS_Pr->SiS_RefIndex[RTI].Ext_InfoFlag; |
| } |
| |
| if(!(SiS_Pr->SiS_LCDInfo & LCDPass11)) { |
| infoflag = SiS_GetReg(SiS_Pr->SiS_P3d4,0x37); /* No longer check D5 */ |
| } |
| |
| infoflag &= 0xc0; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| temp = (infoflag >> 6) | 0x0c; |
| if(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit) { |
| temp ^= 0x04; |
| if(SiS_Pr->SiS_ModeType >= Mode24Bpp) temp |= 0x10; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1a,0xe0,temp); |
| } else { |
| temp = 0x30; |
| if(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit) temp = 0x20; |
| temp |= infoflag; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x19,0x0f,temp); |
| temp = 0; |
| if(SiS_Pr->SiS_LCDInfo & LCDRGB18Bit) { |
| if(SiS_Pr->SiS_ModeType >= Mode24Bpp) temp |= 0x80; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x1a,0x7f,temp); |
| } |
| |
| } |
| } |
| |
| static void |
| SetPanelParms661(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT romptr, temp1, temp2; |
| |
| if(SiS_Pr->SiS_VBType & (VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV)) { |
| if(SiS_Pr->LVDSHL != -1) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x24,0xfc,SiS_Pr->LVDSHL); |
| } |
| } |
| |
| if(SiS_Pr->SiS_ROMNew) { |
| |
| if((romptr = GetLCDStructPtr661_2(SiS_Pr, HwInfo))) { |
| if(SiS_Pr->SiS_VBType & (VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV)) { |
| temp1 = (ROMAddr[romptr] & 0x03) | 0x0c; |
| temp2 = 0xfc; |
| if(SiS_Pr->LVDSHL != -1) { |
| temp1 &= 0xfc; |
| temp2 = 0xf3; |
| } |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x24,temp2,temp1); |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| temp1 = (ROMAddr[romptr + 1] & 0x80) >> 1; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d,0xbf,temp1); |
| } |
| } |
| |
| } |
| } |
| |
| static void |
| SiS_OEM310Setting(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex,USHORT RRTI) |
| { |
| if((SiS_Pr->SiS_ROMNew) && (SiS_Pr->SiS_VBType & VB_SISLVDS)) { |
| SetDelayComp661(SiS_Pr,HwInfo,ModeNo,ModeIdIndex,RRTI); |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| SetCRT2SyncDither661(SiS_Pr,HwInfo,ModeNo,RRTI); |
| SetPanelParms661(SiS_Pr,HwInfo); |
| } |
| } else { |
| SetDelayComp(SiS_Pr,HwInfo,ModeNo); |
| } |
| |
| if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToTV)) { |
| SetAntiFlicker(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| SetPhaseIncr(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| SetYFilter(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| SetEdgeEnhance(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| } |
| } |
| } |
| |
| static void |
| SiS_OEM661Setting(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex, USHORT RRTI) |
| { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| |
| SetDelayComp661(SiS_Pr,HwInfo,ModeNo,ModeIdIndex,RRTI); |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| SetCRT2SyncDither661(SiS_Pr,HwInfo,ModeNo,RRTI); |
| SetPanelParms661(SiS_Pr,HwInfo); |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| SetPhaseIncr(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| SetYFilter(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| SetAntiFlicker(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| if(SiS_Pr->SiS_VBType & VB_SIS301) { |
| SetEdgeEnhance(SiS_Pr,HwInfo,ModeNo,ModeIdIndex); |
| } |
| } |
| } |
| } |
| |
| /* FinalizeLCD |
| * This finalizes some CRT2 registers for the very panel used. |
| * If we have a backup if these registers, we use it; otherwise |
| * we set the register according to most BIOSes. However, this |
| * function looks quite different in every BIOS, so you better |
| * pray that we have a backup... |
| */ |
| static void |
| SiS_FinalizeLCD(SiS_Private *SiS_Pr, USHORT ModeNo, USHORT ModeIdIndex, |
| PSIS_HW_INFO HwInfo) |
| { |
| USHORT tempcl,tempch,tempbl,tempbh,tempbx,tempax,temp; |
| USHORT resinfo,modeflag; |
| |
| if(!(SiS_Pr->SiS_VBType & VB_SIS301LV302LV)) return; |
| if(SiS_Pr->SiS_ROMNew) return; |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(SiS_Pr->LVDSHL != -1) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x24,0xfc,SiS_Pr->LVDSHL); |
| } |
| } |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_Custom) return; |
| if(SiS_Pr->UseCustomMode) return; |
| |
| switch(SiS_Pr->SiS_CustomT) { |
| case CUT_COMPAQ1280: |
| case CUT_COMPAQ12802: |
| case CUT_CLEVO1400: |
| case CUT_CLEVO14002: |
| return; |
| } |
| |
| if(ModeNo <= 0x13) { |
| resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| } else { |
| resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| } |
| |
| if(IS_SIS650) { |
| if(!(SiS_GetReg(SiS_Pr->SiS_P3d4, 0x5f) & 0xf0)) { |
| if(SiS_Pr->SiS_CustomT == CUT_CLEVO1024) { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1e,0x02); |
| } else { |
| SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x1e,0x03); |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_CustomT == CUT_CLEVO1024) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| /* Maybe all panels? */ |
| if(SiS_Pr->LVDSHL == -1) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x24,0xfc,0x01); |
| } |
| return; |
| } |
| } |
| |
| if(SiS_Pr->SiS_CustomT == CUT_CLEVO10242) { |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(SiS_Pr->LVDSHL == -1) { |
| /* Maybe all panels? */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x24,0xfc,0x01); |
| } |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| tempch = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) >> 4; |
| if(tempch == 3) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x02); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,0x25); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1c,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1d,0x1b); |
| } |
| } |
| return; |
| } |
| } |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(SiS_Pr->SiS_VBType & (VB_SIS302LV | VB_SIS302ELV)) { |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x2a,0x00); |
| #ifdef SET_EMI |
| SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x30,0x0c); |
| #endif |
| SiS_SetReg(SiS_Pr->SiS_Part4Port,0x34,0x10); |
| } |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { |
| if(SiS_Pr->LVDSHL == -1) { |
| /* Maybe ACER only? */ |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x24,0xfc,0x01); |
| } |
| } |
| tempch = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) >> 4; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1f,0x76); |
| } else if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(tempch == 0x03) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x02); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,0x25); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1c,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1d,0x1b); |
| } |
| if((SiS_Pr->Backup == TRUE) && (SiS_Pr->Backup_Mode == ModeNo)) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x14,SiS_Pr->Backup_14); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x15,SiS_Pr->Backup_15); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x16,SiS_Pr->Backup_16); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x17,SiS_Pr->Backup_17); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,SiS_Pr->Backup_18); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x19,SiS_Pr->Backup_19); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1a,SiS_Pr->Backup_1a); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,SiS_Pr->Backup_1b); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1c,SiS_Pr->Backup_1c); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1d,SiS_Pr->Backup_1d); |
| } else if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { /* 1.10.8w */ |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x14,0x90); |
| if(ModeNo <= 0x13) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x11); |
| if((resinfo == 0) || (resinfo == 2)) return; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x18); |
| if((resinfo == 1) || (resinfo == 3)) return; |
| } |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x02); |
| if((ModeNo > 0x13) && (resinfo == SIS_RI_1024x768)) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x02); /* 1.10.7u */ |
| #if 0 |
| tempbx = 806; /* 0x326 */ /* other older BIOSes */ |
| tempbx--; |
| temp = tempbx & 0xff; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp); |
| temp = (tempbx >> 8) & 0x03; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x1d,0xf8,temp); |
| #endif |
| } |
| } else if(ModeNo <= 0x13) { |
| if(ModeNo <= 1) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x70); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x19,0xff); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,0x48); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1d,0x12); |
| } |
| if(!(modeflag & HalfDCLK)) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x14,0x20); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x15,0x1a); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x16,0x28); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x17,0x00); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x4c); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x19,0xdc); |
| if(ModeNo == 0x12) { |
| switch(tempch) { |
| case 0: |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x95); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x19,0xdc); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1a,0x10); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,0x95); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1c,0x48); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1d,0x12); |
| break; |
| case 2: |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,0x95); |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,0x48); |
| break; |
| case 3: |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,0x95); |
| break; |
| } |
| } |
| } |
| } |
| } |
| } else { |
| tempcl = tempbh = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x01); |
| tempcl &= 0x0f; |
| tempbh &= 0x70; |
| tempbh >>= 4; |
| tempbl = SiS_GetReg(SiS_Pr->SiS_Part2Port,0x04); |
| tempbx = (tempbh << 8) | tempbl; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if((resinfo == SIS_RI_1024x768) || (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD))) { |
| if(SiS_Pr->SiS_SetFlag & LCDVESATiming) { |
| tempbx = 770; |
| } else { |
| if(tempbx > 770) tempbx = 770; |
| if(SiS_Pr->SiS_VGAVDE < 600) { |
| tempax = 768 - SiS_Pr->SiS_VGAVDE; |
| tempax >>= 4; /* 1.10.7w; 1.10.6s: 3; */ |
| if(SiS_Pr->SiS_VGAVDE <= 480) tempax >>= 4; /* 1.10.7w; 1.10.6s: < 480; >>=1; */ |
| tempbx -= tempax; |
| } |
| } |
| } else return; |
| } |
| temp = tempbx & 0xff; |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,temp); |
| temp = ((tempbx & 0xff00) >> 4) | tempcl; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x01,0x80,temp); |
| } |
| } |
| } |
| |
| #endif |
| |
| /* ================= SiS 300 O.E.M. ================== */ |
| |
| #ifdef SIS300 |
| |
| static void |
| SetOEMLCDData2(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex, USHORT RefTabIndex) |
| { |
| USHORT crt2crtc=0, modeflag, myindex=0; |
| UCHAR temp; |
| int i; |
| |
| if(ModeNo <= 0x13) { |
| modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; |
| crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; |
| } else { |
| modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; |
| crt2crtc = SiS_Pr->SiS_RefIndex[RefTabIndex].Ext_CRT2CRTC; |
| } |
| |
| crt2crtc &= 0x3f; |
| |
| if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) { |
| SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xdf); |
| } |
| |
| if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) { |
| if(modeflag & HalfDCLK) myindex = 1; |
| |
| if(SiS_Pr->SiS_SetFlag & LowModeTests) { |
| for(i=0; i<7; i++) { |
| if(barco_p1[myindex][crt2crtc][i][0]) { |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port, |
| barco_p1[myindex][crt2crtc][i][0], |
| barco_p1[myindex][crt2crtc][i][2], |
| barco_p1[myindex][crt2crtc][i][1]); |
| } |
| } |
| } |
| temp = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00); |
| if(temp & 0x80) { |
| temp = SiS_GetReg(SiS_Pr->SiS_Part1Port,0x18); |
| temp++; |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,0x18,temp); |
| } |
| } |
| } |
| |
| static USHORT |
| GetOEMLCDPtr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, int Flag) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT tempbx=0,romptr=0; |
| UCHAR customtable300[] = { |
| 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, |
| 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff |
| }; |
| UCHAR customtable630[] = { |
| 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, |
| 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff |
| }; |
| |
| if(HwInfo->jChipType == SIS_300) { |
| |
| tempbx = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36) & 0x0f; |
| if(SiS_Pr->SiS_VBType & VB_SIS301) tempbx &= 0x07; |
| tempbx -= 2; |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) tempbx += 4; |
| if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx += 3; |
| } |
| if(SiS_Pr->SiS_UseROM) { |
| if(ROMAddr[0x235] & 0x80) { |
| tempbx = SiS_Pr->SiS_LCDTypeInfo; |
| if(Flag) { |
| romptr = SISGETROMW(0x255); |
| if(romptr) tempbx = ROMAddr[romptr + SiS_Pr->SiS_LCDTypeInfo]; |
| else tempbx = customtable300[SiS_Pr->SiS_LCDTypeInfo]; |
| if(tempbx == 0xFF) return 0xFFFF; |
| } |
| tempbx <<= 1; |
| if(!(SiS_Pr->SiS_SetFlag & LCDVESATiming)) tempbx++; |
| } |
| } |
| |
| } else { |
| |
| if(Flag) { |
| if(SiS_Pr->SiS_UseROM) { |
| romptr = SISGETROMW(0x255); |
| if(romptr) tempbx = ROMAddr[romptr + SiS_Pr->SiS_LCDTypeInfo]; |
| else tempbx = 0xff; |
| } else { |
| tempbx = customtable630[SiS_Pr->SiS_LCDTypeInfo]; |
| } |
| if(tempbx == 0xFF) return 0xFFFF; |
| tempbx <<= 2; |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempbx += 2; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++; |
| return tempbx; |
| } |
| tempbx = SiS_Pr->SiS_LCDTypeInfo << 2; |
| if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempbx += 2; |
| if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++; |
| |
| } |
| |
| return tempbx; |
| } |
| |
| static void |
| SetOEMLCDDelay(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,romptr=0; |
| |
| if(SiS_Pr->SiS_LCDResInfo == Panel_Custom) return; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if(!(ROMAddr[0x237] & 0x01)) return; |
| if(!(ROMAddr[0x237] & 0x02)) return; |
| romptr = SISGETROMW(0x24b); |
| } |
| |
| /* The Panel Compensation Delay should be set according to tables |
| * here. Unfortunately, various BIOS versions don't case about |
| * a uniform way using eg. ROM byte 0x220, but use different |
| * hard coded delays (0x04, 0x20, 0x18) in SetGroup1(). |
| * Thus we don't set this if the user select a custom pdc or if |
| * we otherwise detected a valid pdc. |
| */ |
| if(SiS_Pr->PDC != -1) return; |
| |
| temp = GetOEMLCDPtr(SiS_Pr,HwInfo, 0); |
| |
| if(SiS_Pr->UseCustomMode) |
| index = 0; |
| else |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].VB_LCDDelayIndex; |
| |
| if(HwInfo->jChipType != SIS_300) { |
| if(romptr) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += index; |
| temp = ROMAddr[romptr]; |
| } else { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| temp = SiS300_OEMLCDDelay2[temp][index]; |
| } else { |
| temp = SiS300_OEMLCDDelay3[temp][index]; |
| } |
| } |
| } else { |
| if(SiS_Pr->SiS_UseROM && (ROMAddr[0x235] & 0x80)) { |
| if(romptr) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += index; |
| temp = ROMAddr[romptr]; |
| } else { |
| temp = SiS300_OEMLCDDelay5[temp][index]; |
| } |
| } else { |
| if(SiS_Pr->SiS_UseROM) { |
| romptr = ROMAddr[0x249] | (ROMAddr[0x24a] << 8); |
| if(romptr) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += index; |
| temp = ROMAddr[romptr]; |
| } else { |
| temp = SiS300_OEMLCDDelay4[temp][index]; |
| } |
| } else { |
| temp = SiS300_OEMLCDDelay4[temp][index]; |
| } |
| } |
| } |
| temp &= 0x3c; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp); /* index 0A D[6:4] */ |
| } |
| |
| static void |
| SetOEMLCDData(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| #if 0 /* Unfinished; Data table missing */ |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp; |
| |
| if((SiS_Pr->SiS_UseROM) { |
| if(!(ROMAddr[0x237] & 0x01)) return; |
| if(!(ROMAddr[0x237] & 0x04)) return; |
| /* No rom pointer in BIOS header! */ |
| } |
| |
| temp = GetOEMLCDPtr(SiS_Pr,HwInfo, 1); |
| if(temp = 0xFFFF) return; |
| |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex]._VB_LCDHIndex; |
| for(i=0x14, j=0; i<=0x17; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,i,SiS300_LCDHData[temp][index][j]); |
| } |
| SiS_SetRegANDOR(SiS_SiS_Part1Port,0x1a, 0xf8, (SiS300_LCDHData[temp][index][j] & 0x07)); |
| |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex]._VB_LCDVIndex; |
| SiS_SetReg(SiS_SiS_Part1Port,0x18, SiS300_LCDVData[temp][index][0]); |
| SiS_SetRegANDOR(SiS_SiS_Part1Port,0x19, 0xF0, SiS300_LCDVData[temp][index][1]); |
| SiS_SetRegANDOR(SiS_SiS_Part1Port,0x1A, 0xC7, (SiS300_LCDVData[temp][index][2] & 0x38)); |
| for(i=0x1b, j=3; i<=0x1d; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part1Port,i,SiS300_LCDVData[temp][index][j]); |
| } |
| #endif |
| } |
| |
| static USHORT |
| GetOEMTVPtr(SiS_Private *SiS_Pr) |
| { |
| USHORT index; |
| |
| index = 0; |
| if(!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) index += 4; |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToSCART) index += 2; |
| else if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) index += 3; |
| else if(SiS_Pr->SiS_TVMode & TVSetPAL) index += 1; |
| } else { |
| if(SiS_Pr->SiS_TVMode & TVSetCHOverScan) index += 2; |
| if(SiS_Pr->SiS_TVMode & TVSetPAL) index += 1; |
| } |
| return index; |
| } |
| |
| static void |
| SetOEMTVDelay(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,romptr=0; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if(!(ROMAddr[0x238] & 0x01)) return; |
| if(!(ROMAddr[0x238] & 0x02)) return; |
| romptr = SISGETROMW(0x241); |
| } |
| |
| temp = GetOEMTVPtr(SiS_Pr); |
| |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].VB_TVDelayIndex; |
| |
| if(romptr) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += index; |
| temp = ROMAddr[romptr]; |
| } else { |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| temp = SiS300_OEMTVDelay301[temp][index]; |
| } else { |
| temp = SiS300_OEMTVDelayLVDS[temp][index]; |
| } |
| } |
| temp &= 0x3c; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp); |
| } |
| |
| static void |
| SetOEMAntiFlicker(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo, USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,romptr=0; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if(!(ROMAddr[0x238] & 0x01)) return; |
| if(!(ROMAddr[0x238] & 0x04)) return; |
| romptr = SISGETROMW(0x243); |
| } |
| |
| temp = GetOEMTVPtr(SiS_Pr); |
| |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].VB_TVFlickerIndex; |
| |
| if(romptr) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += index; |
| temp = ROMAddr[romptr]; |
| } else { |
| temp = SiS300_OEMTVFlicker[temp][index]; |
| } |
| temp &= 0x70; |
| SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x0A,0x8F,temp); |
| } |
| |
| static void |
| SetOEMPhaseIncr(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,i,j,temp,romptr=0; |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToHiVision) return; |
| |
| if(SiS_Pr->SiS_TVMode & (TVSetNTSC1024 | TVSetNTSCJ | TVSetPALM | TVSetPALN)) return; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if(!(ROMAddr[0x238] & 0x01)) return; |
| if(!(ROMAddr[0x238] & 0x08)) return; |
| romptr = SISGETROMW(0x245); |
| } |
| |
| temp = GetOEMTVPtr(SiS_Pr); |
| |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].VB_TVPhaseIndex; |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| for(i=0x31, j=0; i<=0x34; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS300_Phase2[temp][index][j]); |
| } |
| } else { |
| if(romptr) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += (index * 4); |
| for(i=0x31, j=0; i<=0x34; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,ROMAddr[romptr + j]); |
| } |
| } else { |
| for(i=0x31, j=0; i<=0x34; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS300_Phase1[temp][index][j]); |
| } |
| } |
| } |
| } |
| |
| static void |
| SetOEMYFilter(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo,USHORT ModeIdIndex) |
| { |
| UCHAR *ROMAddr = HwInfo->pjVirtualRomBase; |
| USHORT index,temp,i,j,romptr=0; |
| |
| if(SiS_Pr->SiS_VBInfo & (SetCRT2ToSCART | SetCRT2ToHiVision | SetCRT2ToYPbPr525750)) return; |
| |
| if(SiS_Pr->SiS_UseROM) { |
| if(!(ROMAddr[0x238] & 0x01)) return; |
| if(!(ROMAddr[0x238] & 0x10)) return; |
| romptr = SISGETROMW(0x247); |
| } |
| |
| temp = GetOEMTVPtr(SiS_Pr); |
| |
| if(SiS_Pr->SiS_TVMode & TVSetPALM) temp = 8; |
| else if(SiS_Pr->SiS_TVMode & TVSetPALN) temp = 9; |
| /* NTSCJ uses NTSC filters */ |
| |
| index = SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].VB_TVYFilterIndex; |
| |
| if(SiS_Pr->SiS_VBType & VB_SIS301BLV302BLV) { |
| for(i=0x35, j=0; i<=0x38; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS300_Filter2[temp][index][j]); |
| } |
| for(i=0x48; i<=0x4A; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS300_Filter2[temp][index][j]); |
| } |
| } else { |
| if((romptr) && (!(SiS_Pr->SiS_TVMode & (TVSetPALM|TVSetPALN)))) { |
| romptr += (temp * 2); |
| romptr = SISGETROMW(romptr); |
| romptr += (index * 4); |
| for(i=0x35, j=0; i<=0x38; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,ROMAddr[romptr + j]); |
| } |
| } else { |
| for(i=0x35, j=0; i<=0x38; i++, j++) { |
| SiS_SetReg(SiS_Pr->SiS_Part2Port,i,SiS300_Filter1[temp][index][j]); |
| } |
| } |
| } |
| } |
| |
| static USHORT |
| SiS_SearchVBModeID(SiS_Private *SiS_Pr, USHORT *ModeNo) |
| { |
| USHORT ModeIdIndex; |
| UCHAR VGAINFO = SiS_Pr->SiS_VGAINFO; |
| |
| if(*ModeNo <= 5) *ModeNo |= 1; |
| |
| for(ModeIdIndex=0; ; ModeIdIndex++) { |
| if(SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].ModeID == *ModeNo) break; |
| if(SiS_Pr->SiS_VBModeIDTable[ModeIdIndex].ModeID == 0xFF) return 0; |
| } |
| |
| if(*ModeNo != 0x07) { |
| if(*ModeNo > 0x03) return ModeIdIndex; |
| if(VGAINFO & 0x80) return ModeIdIndex; |
| ModeIdIndex++; |
| } |
| |
| if(VGAINFO & 0x10) ModeIdIndex++; /* 400 lines */ |
| /* else 350 lines */ |
| return ModeIdIndex; |
| } |
| |
| static void |
| SiS_OEM300Setting(SiS_Private *SiS_Pr, PSIS_HW_INFO HwInfo, |
| USHORT ModeNo, USHORT ModeIdIndex, USHORT RefTableIndex) |
| { |
| USHORT OEMModeIdIndex=0; |
| |
| if(!SiS_Pr->UseCustomMode) { |
| OEMModeIdIndex = SiS_SearchVBModeID(SiS_Pr,&ModeNo); |
| if(!(OEMModeIdIndex)) return; |
| } |
| |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { |
| SetOEMLCDDelay(SiS_Pr, HwInfo, ModeNo, OEMModeIdIndex); |
| if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { |
| SetOEMLCDData(SiS_Pr, HwInfo, ModeNo, OEMModeIdIndex); |
| } |
| } |
| if(SiS_Pr->UseCustomMode) return; |
| if(SiS_Pr->SiS_VBInfo & SetCRT2ToTV) { |
| SetOEMTVDelay(SiS_Pr, HwInfo, ModeNo,OEMModeIdIndex); |
| if(SiS_Pr->SiS_VBType & VB_SISVB) { |
| SetOEMAntiFlicker(SiS_Pr, HwInfo, ModeNo, OEMModeIdIndex); |
| SetOEMPhaseIncr(SiS_Pr, HwInfo, ModeNo, OEMModeIdIndex); |
| SetOEMYFilter(SiS_Pr, HwInfo, ModeNo, OEMModeIdIndex); |
| } |
| } |
| } |
| #endif |
| |