| /* |
| * PCI Backend - Handles the virtual fields in the configuration space headers. |
| * |
| * Author: Ryan Wilson <hap9@epoch.ncsc.mil> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include "pciback.h" |
| #include "conf_space.h" |
| |
| struct pci_bar_info { |
| u32 val; |
| u32 len_val; |
| int which; |
| }; |
| |
| #define DRV_NAME "xen-pciback" |
| #define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO)) |
| #define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER) |
| |
| static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data) |
| { |
| int i; |
| int ret; |
| |
| ret = xen_pcibk_read_config_word(dev, offset, value, data); |
| if (!atomic_read(&dev->enable_cnt)) |
| return ret; |
| |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) { |
| if (dev->resource[i].flags & IORESOURCE_IO) |
| *value |= PCI_COMMAND_IO; |
| if (dev->resource[i].flags & IORESOURCE_MEM) |
| *value |= PCI_COMMAND_MEMORY; |
| } |
| |
| return ret; |
| } |
| |
| static int command_write(struct pci_dev *dev, int offset, u16 value, void *data) |
| { |
| struct xen_pcibk_dev_data *dev_data; |
| int err; |
| |
| dev_data = pci_get_drvdata(dev); |
| if (!pci_is_enabled(dev) && is_enable_cmd(value)) { |
| if (unlikely(verbose_request)) |
| printk(KERN_DEBUG DRV_NAME ": %s: enable\n", |
| pci_name(dev)); |
| err = pci_enable_device(dev); |
| if (err) |
| return err; |
| if (dev_data) |
| dev_data->enable_intx = 1; |
| } else if (pci_is_enabled(dev) && !is_enable_cmd(value)) { |
| if (unlikely(verbose_request)) |
| printk(KERN_DEBUG DRV_NAME ": %s: disable\n", |
| pci_name(dev)); |
| pci_disable_device(dev); |
| if (dev_data) |
| dev_data->enable_intx = 0; |
| } |
| |
| if (!dev->is_busmaster && is_master_cmd(value)) { |
| if (unlikely(verbose_request)) |
| printk(KERN_DEBUG DRV_NAME ": %s: set bus master\n", |
| pci_name(dev)); |
| pci_set_master(dev); |
| } |
| |
| if (value & PCI_COMMAND_INVALIDATE) { |
| if (unlikely(verbose_request)) |
| printk(KERN_DEBUG |
| DRV_NAME ": %s: enable memory-write-invalidate\n", |
| pci_name(dev)); |
| err = pci_set_mwi(dev); |
| if (err) { |
| printk(KERN_WARNING |
| DRV_NAME ": %s: cannot enable " |
| "memory-write-invalidate (%d)\n", |
| pci_name(dev), err); |
| value &= ~PCI_COMMAND_INVALIDATE; |
| } |
| } |
| |
| return pci_write_config_word(dev, offset, value); |
| } |
| |
| static int rom_write(struct pci_dev *dev, int offset, u32 value, void *data) |
| { |
| struct pci_bar_info *bar = data; |
| |
| if (unlikely(!bar)) { |
| printk(KERN_WARNING DRV_NAME ": driver data not found for %s\n", |
| pci_name(dev)); |
| return XEN_PCI_ERR_op_failed; |
| } |
| |
| /* A write to obtain the length must happen as a 32-bit write. |
| * This does not (yet) support writing individual bytes |
| */ |
| if (value == ~PCI_ROM_ADDRESS_ENABLE) |
| bar->which = 1; |
| else { |
| u32 tmpval; |
| pci_read_config_dword(dev, offset, &tmpval); |
| if (tmpval != bar->val && value == bar->val) { |
| /* Allow restoration of bar value. */ |
| pci_write_config_dword(dev, offset, bar->val); |
| } |
| bar->which = 0; |
| } |
| |
| /* Do we need to support enabling/disabling the rom address here? */ |
| |
| return 0; |
| } |
| |
| /* For the BARs, only allow writes which write ~0 or |
| * the correct resource information |
| * (Needed for when the driver probes the resource usage) |
| */ |
| static int bar_write(struct pci_dev *dev, int offset, u32 value, void *data) |
| { |
| struct pci_bar_info *bar = data; |
| |
| if (unlikely(!bar)) { |
| printk(KERN_WARNING DRV_NAME ": driver data not found for %s\n", |
| pci_name(dev)); |
| return XEN_PCI_ERR_op_failed; |
| } |
| |
| /* A write to obtain the length must happen as a 32-bit write. |
| * This does not (yet) support writing individual bytes |
| */ |
| if (value == ~0) |
| bar->which = 1; |
| else { |
| u32 tmpval; |
| pci_read_config_dword(dev, offset, &tmpval); |
| if (tmpval != bar->val && value == bar->val) { |
| /* Allow restoration of bar value. */ |
| pci_write_config_dword(dev, offset, bar->val); |
| } |
| bar->which = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int bar_read(struct pci_dev *dev, int offset, u32 * value, void *data) |
| { |
| struct pci_bar_info *bar = data; |
| |
| if (unlikely(!bar)) { |
| printk(KERN_WARNING DRV_NAME ": driver data not found for %s\n", |
| pci_name(dev)); |
| return XEN_PCI_ERR_op_failed; |
| } |
| |
| *value = bar->which ? bar->len_val : bar->val; |
| |
| return 0; |
| } |
| |
| static inline void read_dev_bar(struct pci_dev *dev, |
| struct pci_bar_info *bar_info, int offset, |
| u32 len_mask) |
| { |
| int pos; |
| struct resource *res = dev->resource; |
| |
| if (offset == PCI_ROM_ADDRESS || offset == PCI_ROM_ADDRESS1) |
| pos = PCI_ROM_RESOURCE; |
| else { |
| pos = (offset - PCI_BASE_ADDRESS_0) / 4; |
| if (pos && ((res[pos - 1].flags & (PCI_BASE_ADDRESS_SPACE | |
| PCI_BASE_ADDRESS_MEM_TYPE_MASK)) == |
| (PCI_BASE_ADDRESS_SPACE_MEMORY | |
| PCI_BASE_ADDRESS_MEM_TYPE_64))) { |
| bar_info->val = res[pos - 1].start >> 32; |
| bar_info->len_val = res[pos - 1].end >> 32; |
| return; |
| } |
| } |
| |
| bar_info->val = res[pos].start | |
| (res[pos].flags & PCI_REGION_FLAG_MASK); |
| bar_info->len_val = res[pos].end - res[pos].start + 1; |
| } |
| |
| static void *bar_init(struct pci_dev *dev, int offset) |
| { |
| struct pci_bar_info *bar = kmalloc(sizeof(*bar), GFP_KERNEL); |
| |
| if (!bar) |
| return ERR_PTR(-ENOMEM); |
| |
| read_dev_bar(dev, bar, offset, ~0); |
| bar->which = 0; |
| |
| return bar; |
| } |
| |
| static void *rom_init(struct pci_dev *dev, int offset) |
| { |
| struct pci_bar_info *bar = kmalloc(sizeof(*bar), GFP_KERNEL); |
| |
| if (!bar) |
| return ERR_PTR(-ENOMEM); |
| |
| read_dev_bar(dev, bar, offset, ~PCI_ROM_ADDRESS_ENABLE); |
| bar->which = 0; |
| |
| return bar; |
| } |
| |
| static void bar_reset(struct pci_dev *dev, int offset, void *data) |
| { |
| struct pci_bar_info *bar = data; |
| |
| bar->which = 0; |
| } |
| |
| static void bar_release(struct pci_dev *dev, int offset, void *data) |
| { |
| kfree(data); |
| } |
| |
| static int xen_pcibk_read_vendor(struct pci_dev *dev, int offset, |
| u16 *value, void *data) |
| { |
| *value = dev->vendor; |
| |
| return 0; |
| } |
| |
| static int xen_pcibk_read_device(struct pci_dev *dev, int offset, |
| u16 *value, void *data) |
| { |
| *value = dev->device; |
| |
| return 0; |
| } |
| |
| static int interrupt_read(struct pci_dev *dev, int offset, u8 * value, |
| void *data) |
| { |
| *value = (u8) dev->irq; |
| |
| return 0; |
| } |
| |
| static int bist_write(struct pci_dev *dev, int offset, u8 value, void *data) |
| { |
| u8 cur_value; |
| int err; |
| |
| err = pci_read_config_byte(dev, offset, &cur_value); |
| if (err) |
| goto out; |
| |
| if ((cur_value & ~PCI_BIST_START) == (value & ~PCI_BIST_START) |
| || value == PCI_BIST_START) |
| err = pci_write_config_byte(dev, offset, value); |
| |
| out: |
| return err; |
| } |
| |
| static const struct config_field header_common[] = { |
| { |
| .offset = PCI_VENDOR_ID, |
| .size = 2, |
| .u.w.read = xen_pcibk_read_vendor, |
| }, |
| { |
| .offset = PCI_DEVICE_ID, |
| .size = 2, |
| .u.w.read = xen_pcibk_read_device, |
| }, |
| { |
| .offset = PCI_COMMAND, |
| .size = 2, |
| .u.w.read = command_read, |
| .u.w.write = command_write, |
| }, |
| { |
| .offset = PCI_INTERRUPT_LINE, |
| .size = 1, |
| .u.b.read = interrupt_read, |
| }, |
| { |
| .offset = PCI_INTERRUPT_PIN, |
| .size = 1, |
| .u.b.read = xen_pcibk_read_config_byte, |
| }, |
| { |
| /* Any side effects of letting driver domain control cache line? */ |
| .offset = PCI_CACHE_LINE_SIZE, |
| .size = 1, |
| .u.b.read = xen_pcibk_read_config_byte, |
| .u.b.write = xen_pcibk_write_config_byte, |
| }, |
| { |
| .offset = PCI_LATENCY_TIMER, |
| .size = 1, |
| .u.b.read = xen_pcibk_read_config_byte, |
| }, |
| { |
| .offset = PCI_BIST, |
| .size = 1, |
| .u.b.read = xen_pcibk_read_config_byte, |
| .u.b.write = bist_write, |
| }, |
| {} |
| }; |
| |
| #define CFG_FIELD_BAR(reg_offset) \ |
| { \ |
| .offset = reg_offset, \ |
| .size = 4, \ |
| .init = bar_init, \ |
| .reset = bar_reset, \ |
| .release = bar_release, \ |
| .u.dw.read = bar_read, \ |
| .u.dw.write = bar_write, \ |
| } |
| |
| #define CFG_FIELD_ROM(reg_offset) \ |
| { \ |
| .offset = reg_offset, \ |
| .size = 4, \ |
| .init = rom_init, \ |
| .reset = bar_reset, \ |
| .release = bar_release, \ |
| .u.dw.read = bar_read, \ |
| .u.dw.write = rom_write, \ |
| } |
| |
| static const struct config_field header_0[] = { |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_0), |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_1), |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_2), |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_3), |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_4), |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_5), |
| CFG_FIELD_ROM(PCI_ROM_ADDRESS), |
| {} |
| }; |
| |
| static const struct config_field header_1[] = { |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_0), |
| CFG_FIELD_BAR(PCI_BASE_ADDRESS_1), |
| CFG_FIELD_ROM(PCI_ROM_ADDRESS1), |
| {} |
| }; |
| |
| int xen_pcibk_config_header_add_fields(struct pci_dev *dev) |
| { |
| int err; |
| |
| err = xen_pcibk_config_add_fields(dev, header_common); |
| if (err) |
| goto out; |
| |
| switch (dev->hdr_type) { |
| case PCI_HEADER_TYPE_NORMAL: |
| err = xen_pcibk_config_add_fields(dev, header_0); |
| break; |
| |
| case PCI_HEADER_TYPE_BRIDGE: |
| err = xen_pcibk_config_add_fields(dev, header_1); |
| break; |
| |
| default: |
| err = -EINVAL; |
| printk(KERN_ERR DRV_NAME ": %s: Unsupported header type %d!\n", |
| pci_name(dev), dev->hdr_type); |
| break; |
| } |
| |
| out: |
| return err; |
| } |