blob: 027083e4fe02d4533d5f25aa01e5f94dc36c364b [file] [log] [blame]
/*
* Copyright (c) 2010 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/****************
* Common types *
*/
#ifndef _BRCMF_H_
#define _BRCMF_H_
#define BRCMF_VERSION_STR "4.218.248.5"
/*******************************************************************************
* IO codes that are interpreted by dongle firmware
******************************************************************************/
#define BRCMF_C_UP 2
#define BRCMF_C_SET_PROMISC 10
#define BRCMF_C_GET_RATE 12
#define BRCMF_C_GET_INFRA 19
#define BRCMF_C_SET_INFRA 20
#define BRCMF_C_GET_AUTH 21
#define BRCMF_C_SET_AUTH 22
#define BRCMF_C_GET_BSSID 23
#define BRCMF_C_GET_SSID 25
#define BRCMF_C_SET_SSID 26
#define BRCMF_C_GET_CHANNEL 29
#define BRCMF_C_GET_SRL 31
#define BRCMF_C_GET_LRL 33
#define BRCMF_C_GET_RADIO 37
#define BRCMF_C_SET_RADIO 38
#define BRCMF_C_GET_PHYTYPE 39
#define BRCMF_C_SET_KEY 45
#define BRCMF_C_SET_PASSIVE_SCAN 49
#define BRCMF_C_SCAN 50
#define BRCMF_C_SCAN_RESULTS 51
#define BRCMF_C_DISASSOC 52
#define BRCMF_C_REASSOC 53
#define BRCMF_C_SET_ROAM_TRIGGER 55
#define BRCMF_C_SET_ROAM_DELTA 57
#define BRCMF_C_GET_DTIMPRD 77
#define BRCMF_C_SET_COUNTRY 84
#define BRCMF_C_GET_PM 85
#define BRCMF_C_SET_PM 86
#define BRCMF_C_GET_AP 117
#define BRCMF_C_SET_AP 118
#define BRCMF_C_GET_RSSI 127
#define BRCMF_C_GET_WSEC 133
#define BRCMF_C_SET_WSEC 134
#define BRCMF_C_GET_PHY_NOISE 135
#define BRCMF_C_GET_BSS_INFO 136
#define BRCMF_C_SET_SCAN_CHANNEL_TIME 185
#define BRCMF_C_SET_SCAN_UNASSOC_TIME 187
#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201
#define BRCMF_C_GET_VALID_CHANNELS 217
#define BRCMF_C_GET_KEY_PRIMARY 235
#define BRCMF_C_SET_KEY_PRIMARY 236
#define BRCMF_C_SET_SCAN_PASSIVE_TIME 258
#define BRCMF_C_GET_VAR 262
#define BRCMF_C_SET_VAR 263
/* phy types (returned by WLC_GET_PHYTPE) */
#define WLC_PHY_TYPE_A 0
#define WLC_PHY_TYPE_B 1
#define WLC_PHY_TYPE_G 2
#define WLC_PHY_TYPE_N 4
#define WLC_PHY_TYPE_LP 5
#define WLC_PHY_TYPE_SSN 6
#define WLC_PHY_TYPE_HT 7
#define WLC_PHY_TYPE_LCN 8
#define WLC_PHY_TYPE_NULL 0xf
#define BRCMF_EVENTING_MASK_LEN 16
#define TOE_TX_CSUM_OL 0x00000001
#define TOE_RX_CSUM_OL 0x00000002
#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
/* size of brcmf_scan_params not including variable length array */
#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
/* masks for channel and ssid count */
#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
#define BRCMF_SCAN_ACTION_START 1
#define BRCMF_SCAN_ACTION_CONTINUE 2
#define WL_SCAN_ACTION_ABORT 3
#define BRCMF_ISCAN_REQ_VERSION 1
/* brcmf_iscan_results status values */
#define BRCMF_SCAN_RESULTS_SUCCESS 0
#define BRCMF_SCAN_RESULTS_PARTIAL 1
#define BRCMF_SCAN_RESULTS_PENDING 2
#define BRCMF_SCAN_RESULTS_ABORTED 3
#define BRCMF_SCAN_RESULTS_NO_MEM 4
/* Indicates this key is using soft encrypt */
#define WL_SOFT_KEY (1 << 0)
/* primary (ie tx) key */
#define BRCMF_PRIMARY_KEY (1 << 1)
/* Reserved for backward compat */
#define WL_KF_RES_4 (1 << 4)
/* Reserved for backward compat */
#define WL_KF_RES_5 (1 << 5)
/* Indicates a group key for a IBSS PEER */
#define WL_IBSS_PEER_GROUP_KEY (1 << 6)
/* For supporting multiple interfaces */
#define BRCMF_MAX_IFS 16
#define DOT11_BSSTYPE_ANY 2
#define DOT11_MAX_DEFAULT_KEYS 4
#define BRCMF_EVENT_MSG_LINK 0x01
#define BRCMF_EVENT_MSG_FLUSHTXQ 0x02
#define BRCMF_EVENT_MSG_GROUP 0x04
struct brcmf_event_msg {
__be16 version;
__be16 flags;
__be32 event_type;
__be32 status;
__be32 reason;
__be32 auth_type;
__be32 datalen;
u8 addr[ETH_ALEN];
char ifname[IFNAMSIZ];
} __packed;
struct brcm_ethhdr {
u16 subtype;
u16 length;
u8 version;
u8 oui[3];
u16 usr_subtype;
} __packed;
struct brcmf_event {
struct ethhdr eth;
struct brcm_ethhdr hdr;
struct brcmf_event_msg msg;
} __packed;
struct dngl_stats {
unsigned long rx_packets; /* total packets received */
unsigned long tx_packets; /* total packets transmitted */
unsigned long rx_bytes; /* total bytes received */
unsigned long tx_bytes; /* total bytes transmitted */
unsigned long rx_errors; /* bad packets received */
unsigned long tx_errors; /* packet transmit problems */
unsigned long rx_dropped; /* packets dropped by dongle */
unsigned long tx_dropped; /* packets dropped by dongle */
unsigned long multicast; /* multicast packets received */
};
/* event codes sent by the dongle to this driver */
#define BRCMF_E_SET_SSID 0
#define BRCMF_E_JOIN 1
#define BRCMF_E_START 2
#define BRCMF_E_AUTH 3
#define BRCMF_E_AUTH_IND 4
#define BRCMF_E_DEAUTH 5
#define BRCMF_E_DEAUTH_IND 6
#define BRCMF_E_ASSOC 7
#define BRCMF_E_ASSOC_IND 8
#define BRCMF_E_REASSOC 9
#define BRCMF_E_REASSOC_IND 10
#define BRCMF_E_DISASSOC 11
#define BRCMF_E_DISASSOC_IND 12
#define BRCMF_E_QUIET_START 13
#define BRCMF_E_QUIET_END 14
#define BRCMF_E_BEACON_RX 15
#define BRCMF_E_LINK 16
#define BRCMF_E_MIC_ERROR 17
#define BRCMF_E_NDIS_LINK 18
#define BRCMF_E_ROAM 19
#define BRCMF_E_TXFAIL 20
#define BRCMF_E_PMKID_CACHE 21
#define BRCMF_E_RETROGRADE_TSF 22
#define BRCMF_E_PRUNE 23
#define BRCMF_E_AUTOAUTH 24
#define BRCMF_E_EAPOL_MSG 25
#define BRCMF_E_SCAN_COMPLETE 26
#define BRCMF_E_ADDTS_IND 27
#define BRCMF_E_DELTS_IND 28
#define BRCMF_E_BCNSENT_IND 29
#define BRCMF_E_BCNRX_MSG 30
#define BRCMF_E_BCNLOST_MSG 31
#define BRCMF_E_ROAM_PREP 32
#define BRCMF_E_PFN_NET_FOUND 33
#define BRCMF_E_PFN_NET_LOST 34
#define BRCMF_E_RESET_COMPLETE 35
#define BRCMF_E_JOIN_START 36
#define BRCMF_E_ROAM_START 37
#define BRCMF_E_ASSOC_START 38
#define BRCMF_E_IBSS_ASSOC 39
#define BRCMF_E_RADIO 40
#define BRCMF_E_PSM_WATCHDOG 41
#define BRCMF_E_PROBREQ_MSG 44
#define BRCMF_E_SCAN_CONFIRM_IND 45
#define BRCMF_E_PSK_SUP 46
#define BRCMF_E_COUNTRY_CODE_CHANGED 47
#define BRCMF_E_EXCEEDED_MEDIUM_TIME 48
#define BRCMF_E_ICV_ERROR 49
#define BRCMF_E_UNICAST_DECODE_ERROR 50
#define BRCMF_E_MULTICAST_DECODE_ERROR 51
#define BRCMF_E_TRACE 52
#define BRCMF_E_IF 54
#define BRCMF_E_RSSI 56
#define BRCMF_E_PFN_SCAN_COMPLETE 57
#define BRCMF_E_EXTLOG_MSG 58
#define BRCMF_E_ACTION_FRAME 59
#define BRCMF_E_ACTION_FRAME_COMPLETE 60
#define BRCMF_E_PRE_ASSOC_IND 61
#define BRCMF_E_PRE_REASSOC_IND 62
#define BRCMF_E_CHANNEL_ADOPTED 63
#define BRCMF_E_AP_STARTED 64
#define BRCMF_E_DFS_AP_STOP 65
#define BRCMF_E_DFS_AP_RESUME 66
#define BRCMF_E_RESERVED1 67
#define BRCMF_E_RESERVED2 68
#define BRCMF_E_ESCAN_RESULT 69
#define BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE 70
#define BRCMF_E_DCS_REQUEST 73
#define BRCMF_E_FIFO_CREDIT_MAP 74
#define BRCMF_E_LAST 75
#define BRCMF_E_STATUS_SUCCESS 0
#define BRCMF_E_STATUS_FAIL 1
#define BRCMF_E_STATUS_TIMEOUT 2
#define BRCMF_E_STATUS_NO_NETWORKS 3
#define BRCMF_E_STATUS_ABORT 4
#define BRCMF_E_STATUS_NO_ACK 5
#define BRCMF_E_STATUS_UNSOLICITED 6
#define BRCMF_E_STATUS_ATTEMPT 7
#define BRCMF_E_STATUS_PARTIAL 8
#define BRCMF_E_STATUS_NEWSCAN 9
#define BRCMF_E_STATUS_NEWASSOC 10
#define BRCMF_E_STATUS_11HQUIET 11
#define BRCMF_E_STATUS_SUPPRESS 12
#define BRCMF_E_STATUS_NOCHANS 13
#define BRCMF_E_STATUS_CS_ABORT 15
#define BRCMF_E_STATUS_ERROR 16
#define BRCMF_E_REASON_INITIAL_ASSOC 0
#define BRCMF_E_REASON_LOW_RSSI 1
#define BRCMF_E_REASON_DEAUTH 2
#define BRCMF_E_REASON_DISASSOC 3
#define BRCMF_E_REASON_BCNS_LOST 4
#define BRCMF_E_REASON_MINTXRATE 9
#define BRCMF_E_REASON_TXFAIL 10
#define BRCMF_E_REASON_FAST_ROAM_FAILED 5
#define BRCMF_E_REASON_DIRECTED_ROAM 6
#define BRCMF_E_REASON_TSPEC_REJECTED 7
#define BRCMF_E_REASON_BETTER_AP 8
#define BRCMF_E_PRUNE_ENCR_MISMATCH 1
#define BRCMF_E_PRUNE_BCAST_BSSID 2
#define BRCMF_E_PRUNE_MAC_DENY 3
#define BRCMF_E_PRUNE_MAC_NA 4
#define BRCMF_E_PRUNE_REG_PASSV 5
#define BRCMF_E_PRUNE_SPCT_MGMT 6
#define BRCMF_E_PRUNE_RADAR 7
#define BRCMF_E_RSN_MISMATCH 8
#define BRCMF_E_PRUNE_NO_COMMON_RATES 9
#define BRCMF_E_PRUNE_BASIC_RATES 10
#define BRCMF_E_PRUNE_CIPHER_NA 12
#define BRCMF_E_PRUNE_KNOWN_STA 13
#define BRCMF_E_PRUNE_WDS_PEER 15
#define BRCMF_E_PRUNE_QBSS_LOAD 16
#define BRCMF_E_PRUNE_HOME_AP 17
#define BRCMF_E_SUP_OTHER 0
#define BRCMF_E_SUP_DECRYPT_KEY_DATA 1
#define BRCMF_E_SUP_BAD_UCAST_WEP128 2
#define BRCMF_E_SUP_BAD_UCAST_WEP40 3
#define BRCMF_E_SUP_UNSUP_KEY_LEN 4
#define BRCMF_E_SUP_PW_KEY_CIPHER 5
#define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6
#define BRCMF_E_SUP_MSG3_IE_MISMATCH 7
#define BRCMF_E_SUP_NO_INSTALL_FLAG 8
#define BRCMF_E_SUP_MSG3_NO_GTK 9
#define BRCMF_E_SUP_GRP_KEY_CIPHER 10
#define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11
#define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12
#define BRCMF_E_SUP_SEND_FAIL 13
#define BRCMF_E_SUP_DEAUTH 14
#define BRCMF_E_IF_ADD 1
#define BRCMF_E_IF_DEL 2
#define BRCMF_E_IF_CHANGE 3
#define BRCMF_E_IF_ROLE_STA 0
#define BRCMF_E_IF_ROLE_AP 1
#define BRCMF_E_IF_ROLE_WDS 2
#define BRCMF_E_LINK_BCN_LOSS 1
#define BRCMF_E_LINK_DISASSOC 2
#define BRCMF_E_LINK_ASSOC_REC 3
#define BRCMF_E_LINK_BSSCFG_DIS 4
/* The level of bus communication with the dongle */
enum brcmf_bus_state {
BRCMF_BUS_DOWN, /* Not ready for frame transfers */
BRCMF_BUS_LOAD, /* Download access only (CPU reset) */
BRCMF_BUS_DATA /* Ready for frame transfers */
};
/* Pattern matching filter. Specifies an offset within received packets to
* start matching, the pattern to match, the size of the pattern, and a bitmask
* that indicates which bits within the pattern should be matched.
*/
struct brcmf_pkt_filter_pattern_le {
/*
* Offset within received packet to start pattern matching.
* Offset '0' is the first byte of the ethernet header.
*/
__le32 offset;
/* Size of the pattern. Bitmask must be the same size.*/
__le32 size_bytes;
/*
* Variable length mask and pattern data. mask starts at offset 0.
* Pattern immediately follows mask.
*/
u8 mask_and_pattern[1];
};
/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
struct brcmf_pkt_filter_le {
__le32 id; /* Unique filter id, specified by app. */
__le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
__le32 negate_match; /* Negate the result of filter matches */
union { /* Filter definitions */
struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
} u;
};
/* IOVAR "pkt_filter_enable" parameter. */
struct brcmf_pkt_filter_enable_le {
__le32 id; /* Unique filter id */
__le32 enable; /* Enable/disable bool */
};
/* BSS info structure
* Applications MUST CHECK ie_offset field and length field to access IEs and
* next bss_info structure in a vector (in struct brcmf_scan_results)
*/
struct brcmf_bss_info_le {
__le32 version; /* version field */
__le32 length; /* byte length of data in this record,
* starting at version and including IEs
*/
u8 BSSID[ETH_ALEN];
__le16 beacon_period; /* units are Kusec */
__le16 capability; /* Capability information */
u8 SSID_len;
u8 SSID[32];
struct {
__le32 count; /* # rates in this set */
u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
} rateset; /* supported rates */
__le16 chanspec; /* chanspec for bss */
__le16 atim_window; /* units are Kusec */
u8 dtim_period; /* DTIM period */
__le16 RSSI; /* receive signal strength (in dBm) */
s8 phy_noise; /* noise (in dBm) */
u8 n_cap; /* BSS is 802.11N Capable */
/* 802.11N BSS Capabilities (based on HT_CAP_*): */
__le32 nbss_cap;
u8 ctl_ch; /* 802.11N BSS control channel number */
__le32 reserved32[1]; /* Reserved for expansion of BSS properties */
u8 flags; /* flags */
u8 reserved[3]; /* Reserved for expansion of BSS properties */
u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
__le16 ie_offset; /* offset at which IEs start, from beginning */
__le32 ie_length; /* byte length of Information Elements */
__le16 SNR; /* average SNR of during frame reception */
/* Add new fields here */
/* variable length Information Elements */
};
struct brcm_rateset_le {
/* # rates in this set */
__le32 count;
/* rates in 500kbps units w/hi bit set if basic */
u8 rates[WL_NUMRATES];
};
struct brcmf_ssid {
u32 SSID_len;
unsigned char SSID[32];
};
struct brcmf_ssid_le {
__le32 SSID_len;
unsigned char SSID[32];
};
struct brcmf_scan_params_le {
struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
u8 bssid[ETH_ALEN]; /* default: bcast */
s8 bss_type; /* default: any,
* DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
*/
u8 scan_type; /* flags, 0 use default */
__le32 nprobes; /* -1 use default, number of probes per channel */
__le32 active_time; /* -1 use default, dwell time per channel for
* active scanning
*/
__le32 passive_time; /* -1 use default, dwell time per channel
* for passive scanning
*/
__le32 home_time; /* -1 use default, dwell time for the
* home channel between channel scans
*/
__le32 channel_num; /* count of channels and ssids that follow
*
* low half is count of channels in
* channel_list, 0 means default (use all
* available channels)
*
* high half is entries in struct brcmf_ssid
* array that follows channel_list, aligned for
* s32 (4 bytes) meaning an odd channel count
* implies a 2-byte pad between end of
* channel_list and first ssid
*
* if ssid count is zero, single ssid in the
* fixed parameter portion is assumed, otherwise
* ssid in the fixed portion is ignored
*/
__le16 channel_list[1]; /* list of chanspecs */
};
/* incremental scan struct */
struct brcmf_iscan_params_le {
__le32 version;
__le16 action;
__le16 scan_duration;
struct brcmf_scan_params_le params_le;
};
struct brcmf_scan_results {
u32 buflen;
u32 version;
u32 count;
struct brcmf_bss_info_le bss_info_le[];
};
struct brcmf_scan_results_le {
__le32 buflen;
__le32 version;
__le32 count;
};
/* used for association with a specific BSSID and chanspec list */
struct brcmf_assoc_params_le {
/* 00:00:00:00:00:00: broadcast scan */
u8 bssid[ETH_ALEN];
/* 0: all available channels, otherwise count of chanspecs in
* chanspec_list */
__le32 chanspec_num;
/* list of chanspecs */
__le16 chanspec_list[1];
};
/* used for join with or without a specific bssid and channel list */
struct brcmf_join_params {
struct brcmf_ssid_le ssid_le;
struct brcmf_assoc_params_le params_le;
};
/* incremental scan results struct */
struct brcmf_iscan_results {
union {
u32 status;
__le32 status_le;
};
union {
struct brcmf_scan_results results;
struct brcmf_scan_results_le results_le;
};
};
/* size of brcmf_iscan_results not including variable length array */
#define BRCMF_ISCAN_RESULTS_FIXED_SIZE \
(sizeof(struct brcmf_scan_results) + \
offsetof(struct brcmf_iscan_results, results))
struct brcmf_wsec_key {
u32 index; /* key index */
u32 len; /* key length */
u8 data[WLAN_MAX_KEY_LEN]; /* key data */
u32 pad_1[18];
u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
u32 flags; /* misc flags */
u32 pad_2[3];
u32 iv_initialized; /* has IV been initialized already? */
u32 pad_3;
/* Rx IV */
struct {
u32 hi; /* upper 32 bits of IV */
u16 lo; /* lower 16 bits of IV */
} rxiv;
u32 pad_4[2];
u8 ea[ETH_ALEN]; /* per station */
};
/*
* dongle requires same struct as above but with fields in little endian order
*/
struct brcmf_wsec_key_le {
__le32 index; /* key index */
__le32 len; /* key length */
u8 data[WLAN_MAX_KEY_LEN]; /* key data */
__le32 pad_1[18];
__le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
__le32 flags; /* misc flags */
__le32 pad_2[3];
__le32 iv_initialized; /* has IV been initialized already? */
__le32 pad_3;
/* Rx IV */
struct {
__le32 hi; /* upper 32 bits of IV */
__le16 lo; /* lower 16 bits of IV */
} rxiv;
__le32 pad_4[2];
u8 ea[ETH_ALEN]; /* per station */
};
/* Used to get specific STA parameters */
struct brcmf_scb_val_le {
__le32 val;
u8 ea[ETH_ALEN];
};
/* channel encoding */
struct brcmf_channel_info_le {
__le32 hw_channel;
__le32 target_channel;
__le32 scan_channel;
};
/* Bus independent dongle command */
struct brcmf_dcmd {
uint cmd; /* common dongle cmd definition */
void *buf; /* pointer to user buffer */
uint len; /* length of user buffer */
u8 set; /* get or set request (optional) */
uint used; /* bytes read or written (optional) */
uint needed; /* bytes needed (optional) */
};
struct brcmf_bus {
u8 type; /* bus type */
void *bus_priv; /* pointer to bus private structure */
void *drvr; /* pointer to driver pub structure brcmf_pub */
enum brcmf_bus_state state;
};
/* Forward decls for struct brcmf_pub (see below) */
struct brcmf_sdio; /* device bus info */
struct brcmf_proto; /* device communication protocol info */
struct brcmf_cfg80211_dev; /* cfg80211 device info */
/* Common structure for module and instance linkage */
struct brcmf_pub {
/* Linkage ponters */
struct brcmf_sdio *bus;
struct brcmf_bus *bus_if;
struct brcmf_proto *prot;
struct brcmf_cfg80211_dev *config;
struct device *dev; /* fullmac dongle device pointer */
/* Internal brcmf items */
bool up; /* Driver up/down (to OS) */
bool txoff; /* Transmit flow-controlled */
uint hdrlen; /* Total BRCMF header length (proto + bus) */
uint maxctl; /* Max size rxctl request from proto to bus */
uint rxsz; /* Rx buffer size bus module should use */
u8 wme_dp; /* wme discard priority */
/* Dongle media info */
bool iswl; /* Dongle-resident driver is wl */
unsigned long drv_version; /* Version of dongle-resident driver */
u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */
struct dngl_stats dstats; /* Stats for dongle-based data */
/* Additional stats for the bus level */
/* Data packets sent to dongle */
unsigned long tx_packets;
/* Multicast data packets sent to dongle */
unsigned long tx_multicast;
/* Errors in sending data to dongle */
unsigned long tx_errors;
/* Control packets sent to dongle */
unsigned long tx_ctlpkts;
/* Errors sending control frames to dongle */
unsigned long tx_ctlerrs;
/* Packets sent up the network interface */
unsigned long rx_packets;
/* Multicast packets sent up the network interface */
unsigned long rx_multicast;
/* Errors processing rx data packets */
unsigned long rx_errors;
/* Control frames processed from dongle */
unsigned long rx_ctlpkts;
/* Errors in processing rx control frames */
unsigned long rx_ctlerrs;
/* Packets dropped locally (no memory) */
unsigned long rx_dropped;
/* Packets flushed due to unscheduled sendup thread */
unsigned long rx_flushed;
/* Number of times dpc scheduled by watchdog timer */
unsigned long wd_dpc_sched;
/* Number of packets where header read-ahead was used. */
unsigned long rx_readahead_cnt;
/* Number of tx packets we had to realloc for headroom */
unsigned long tx_realloc;
/* Number of flow control pkts recvd */
unsigned long fc_packets;
/* Last error return */
int bcmerror;
uint tickcnt;
/* Last error from dongle */
int dongle_error;
/* Suspend disable flag flag */
int suspend_disable_flag; /* "1" to disable all extra powersaving
during suspend */
int in_suspend; /* flag set to 1 when early suspend called */
int dtim_skip; /* dtim skip , default 0 means wake each dtim */
/* Pkt filter defination */
char *pktfilter[100];
int pktfilter_count;
u8 country_code[BRCM_CNTRY_BUF_SZ];
char eventmask[BRCMF_EVENTING_MASK_LEN];
struct brcmf_if *iflist[BRCMF_MAX_IFS];
struct mutex proto_block;
struct work_struct setmacaddr_work;
struct work_struct multicast_work;
u8 macvalue[ETH_ALEN];
atomic_t pend_8021x_cnt;
};
struct brcmf_if_event {
u8 ifidx;
u8 action;
u8 flags;
u8 bssidx;
};
struct bcmevent_name {
uint event;
const char *name;
};
extern const struct bcmevent_name bcmevent_names[];
extern uint brcmf_c_mkiovar(char *name, char *data, uint datalen,
char *buf, uint len);
/* Indication from bus module regarding presence/insertion of dongle.
* Return struct brcmf_pub pointer, used as handle to OS module in later calls.
* Returned structure should have bus and prot pointers filled in.
* bus_hdrlen specifies required headroom for bus module header.
*/
extern struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus,
uint bus_hdrlen, struct device *dev);
extern int brcmf_net_attach(struct brcmf_pub *drvr, int idx);
extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev);
extern s32 brcmf_exec_dcmd(struct net_device *dev, u32 cmd, void *arg, u32 len);
/* Indication from bus module regarding removal/absence of dongle */
extern void brcmf_detach(struct device *dev);
/* Indication from bus module to change flow-control state */
extern void brcmf_txflowcontrol(struct device *dev, int ifidx, bool on);
extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q,
struct sk_buff *pkt, int prec);
/* Receive frame for delivery to OS. Callee disposes of rxp. */
extern void brcmf_rx_frame(struct device *dev, int ifidx,
struct sk_buff_head *rxlist);
static inline void brcmf_rx_packet(struct device *dev, int ifidx,
struct sk_buff *pkt)
{
struct sk_buff_head q;
skb_queue_head_init(&q);
skb_queue_tail(&q, pkt);
brcmf_rx_frame(dev, ifidx, &q);
}
/* Return pointer to interface name */
extern char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
/* Notify tx completion */
extern void brcmf_txcomplete(struct device *dev, struct sk_buff *txp,
bool success);
/* Query dongle */
extern int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx,
uint cmd, void *buf, uint len);
#ifdef BCMDBG
extern int brcmf_write_to_file(struct brcmf_pub *drvr, const u8 *buf, int size);
#endif /* BCMDBG */
extern int brcmf_ifname2idx(struct brcmf_pub *drvr, char *name);
extern int brcmf_c_host_event(struct brcmf_pub *drvr, int *idx,
void *pktdata, struct brcmf_event_msg *,
void **data_ptr);
extern int brcmf_add_if(struct device *dev, int ifidx,
char *name, u8 *mac_addr);
extern void brcmf_del_if(struct brcmf_pub *drvr, int ifidx);
/* Send packet to dongle via data channel */
extern int brcmf_sendpkt(struct brcmf_pub *drvr, int ifidx,\
struct sk_buff *pkt);
extern int brcmf_bus_start(struct device *dev);
extern void brcmf_c_pktfilter_offload_set(struct brcmf_pub *drvr, char *arg);
extern void brcmf_c_pktfilter_offload_enable(struct brcmf_pub *drvr, char *arg,
int enable, int master_mode);
#define BRCMF_DCMD_SMLEN 256 /* "small" cmd buffer required */
#define BRCMF_DCMD_MEDLEN 1536 /* "med" cmd buffer required */
#define BRCMF_DCMD_MAXLEN 8192 /* max length cmd buffer required */
/* message levels */
#define BRCMF_ERROR_VAL 0x0001
#define BRCMF_TRACE_VAL 0x0002
#define BRCMF_INFO_VAL 0x0004
#define BRCMF_DATA_VAL 0x0008
#define BRCMF_CTL_VAL 0x0010
#define BRCMF_TIMER_VAL 0x0020
#define BRCMF_HDRS_VAL 0x0040
#define BRCMF_BYTES_VAL 0x0080
#define BRCMF_INTR_VAL 0x0100
#define BRCMF_GLOM_VAL 0x0400
#define BRCMF_EVENT_VAL 0x0800
#define BRCMF_BTA_VAL 0x1000
#define BRCMF_ISCAN_VAL 0x2000
/* Enter idle immediately (no timeout) */
#define BRCMF_IDLE_IMMEDIATE (-1)
#define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change
when idle */
#define BRCMF_IDLE_INTERVAL 1
#endif /* _BRCMF_H_ */