include/scsi/fc/fc_fcp.h - kernel/msm-4.19 - Gitiles

 /*
  * Copyright(c) 2007 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  *
  * Maintained at www.Open-FCoE.org
  */

 #ifndef _FC_FCP_H_
 #define	_FC_FCP_H_

 /*
  * Fibre Channel Protocol for SCSI.
  * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
  */

 /*
  * fc/fs.h defines FC_TYPE_FCP.
  */

 /*
  * Service parameter page parameters (word 3 bits) for Process Login.
  */
 #define	FCP_SPPF_TASK_RETRY_ID	0x0200	/* task retry ID requested */
 #define	FCP_SPPF_RETRY		0x0100	/* retry supported */
 #define	FCP_SPPF_CONF_COMPL	0x0080	/* confirmed completion allowed */
 #define	FCP_SPPF_OVLY_ALLOW	0x0040	/* data overlay allowed */
 #define	FCP_SPPF_INIT_FCN	0x0020	/* initiator function */
 #define	FCP_SPPF_TARG_FCN	0x0010	/* target function */
 #define	FCP_SPPF_RD_XRDY_DIS	0x0002	/* disable XFER_RDY for reads */
 #define	FCP_SPPF_WR_XRDY_DIS	0x0001	/* disable XFER_RDY for writes */

 /*
  * FCP_CMND IU Payload.
  */
 struct fcp_cmnd {
 	__u8		fc_lun[8];	/* logical unit number */
 	__u8		fc_cmdref;	/* command reference number */
 	__u8		fc_pri_ta;	/* priority and task attribute */
 	__u8		fc_tm_flags;	/* task management flags */
 	__u8		fc_flags;	/* additional len & flags */
 	__u8		fc_cdb[16];	/* base CDB */
 	__be32		fc_dl;		/* data length (must follow fc_cdb) */
 };

 #define	FCP_CMND_LEN	32	/* expected length of structure */

 struct fcp_cmnd32 {
 	__u8		fc_lun[8];	/* logical unit number */
 	__u8		fc_cmdref;	/* command reference number */
 	__u8		fc_pri_ta;	/* priority and task attribute */
 	__u8		fc_tm_flags;	/* task management flags */
 	__u8		fc_flags;	/* additional len & flags */
 	__u8		fc_cdb[32];	/* base CDB */
 	__be32		fc_dl;		/* data length (must follow fc_cdb) */
 };

 #define	FCP_CMND32_LEN	    48	/* expected length of structure */
 #define	FCP_CMND32_ADD_LEN  (16 / 4)	/* Additional cdb length */

 /*
  * fc_pri_ta.
  */
 #define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
 #define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
 #define	FCP_PTA_ORDERED     2	/* ordered task attribute */
 #define	FCP_PTA_ACA	    4	/* auto. contigent allegiance */
 #define	FCP_PTA_MASK	    7	/* mask for task attribute field */
 #define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
 #define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */

 /*
  * fc_tm_flags - task management flags field.
  */
 #define	FCP_TMF_CLR_ACA		0x40	/* clear ACA condition */
 #define	FCP_TMF_TGT_RESET	0x20	/* target reset task management,
 					   deprecated as of FCP-3 */
 #define	FCP_TMF_LUN_RESET	0x10	/* logical unit reset task management */
 #define	FCP_TMF_CLR_TASK_SET	0x04	/* clear task set */
 #define	FCP_TMF_ABT_TASK_SET	0x02	/* abort task set */

 /*
  * fc_flags.
  *  Bits 7:2 are the additional FCP_CDB length / 4.
  */
 #define	FCP_CFL_LEN_MASK	0xfc	/* mask for additional length */
 #define	FCP_CFL_LEN_SHIFT	2	/* shift bits for additional length */
 #define	FCP_CFL_RDDATA		0x02	/* read data */
 #define	FCP_CFL_WRDATA		0x01	/* write data */

 /*
  * FCP_TXRDY IU - transfer ready payload.
  */
 struct fcp_txrdy {
 	__be32		ft_data_ro;	/* data relative offset */
 	__be32		ft_burst_len;	/* burst length */
 	__u8		_ft_resvd[4];	/* reserved */
 };

 #define	FCP_TXRDY_LEN	12	/* expected length of structure */

 /*
  * FCP_RESP IU - response payload.
  *
  * The response payload comes in three parts: the flags/status, the
  * sense/response lengths and the sense data/response info section.
  *
  * From FCP3r04, note 6 of section 9.5.13:
  *
  * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
  * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
  * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
  * non-standard behavior should be tolerated.
  *
  * All response frames will always contain the fcp_resp template.  Some
  * will also include the fcp_resp_len template.
  */
 struct fcp_resp {
 	__u8		_fr_resvd[8];	/* reserved */
 	__be16		fr_retry_delay;	/* retry delay timer */
 	__u8		fr_flags;	/* flags */
 	__u8		fr_status;	/* SCSI status code */
 };

 #define	FCP_RESP_LEN	12	/* expected length of structure */

 struct fcp_resp_ext {
 	__be32		fr_resid;	/* Residual value */
 	__be32		fr_sns_len;	/* SCSI Sense length */
 	__be32		fr_rsp_len;	/* Response Info length */

 	/*
 	 * Optionally followed by RSP info and/or SNS info and/or
 	 * bidirectional read residual length, if any.
 	 */
 };

 #define FCP_RESP_EXT_LEN    12  /* expected length of the structure */

 struct fcp_resp_rsp_info {
     __u8      _fr_resvd[3];       /* reserved */
     __u8      rsp_code;           /* Response Info Code */
     __u8      _fr_resvd2[4];      /* reserved */
 };

 struct fcp_resp_with_ext {
 	struct fcp_resp resp;
 	struct fcp_resp_ext ext;
 };

 #define	FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)

 /*
  * fr_flags.
  */
 #define	FCP_BIDI_RSP	    0x80	/* bidirectional read response */
 #define	FCP_BIDI_READ_UNDER 0x40	/* bidir. read less than requested */
 #define	FCP_BIDI_READ_OVER  0x20	/* DL insufficient for full transfer */
 #define	FCP_CONF_REQ	    0x10	/* confirmation requested */
 #define	FCP_RESID_UNDER     0x08	/* transfer shorter than expected */
 #define	FCP_RESID_OVER	    0x04	/* DL insufficient for full transfer */
 #define	FCP_SNS_LEN_VAL     0x02	/* SNS_LEN field is valid */
 #define	FCP_RSP_LEN_VAL     0x01	/* RSP_LEN field is valid */

 /*
  * rsp_codes
  */
 enum fcp_resp_rsp_codes {
 	FCP_TMF_CMPL = 0,
 	FCP_DATA_LEN_INVALID = 1,
 	FCP_CMND_FIELDS_INVALID = 2,
 	FCP_DATA_PARAM_MISMATCH = 3,
 	FCP_TMF_REJECTED = 4,
 	FCP_TMF_FAILED = 5,
 	FCP_TMF_INVALID_LUN = 9,
 };

 /*
  * FCP SRR Link Service request - Sequence Retransmission Request.
  */
 struct fcp_srr {
 	__u8		srr_op;		/* opcode ELS_SRR */
 	__u8		srr_resvd[3];	/* opcode / reserved - must be zero */
 	__be16		srr_ox_id;	/* OX_ID of failed command */
 	__be16		srr_rx_id;	/* RX_ID of failed command */
 	__be32		srr_rel_off;	/* relative offset */
 	__u8		srr_r_ctl;	/* r_ctl for the information unit */
 	__u8		srr_resvd2[3];	/* reserved */
 };

 /*
  * Feature bits in name server FC-4 Features object.
  */
 #define	FCP_FEAT_TARG	(1 << 0)	/* target function supported */
 #define	FCP_FEAT_INIT	(1 << 1)	/* initiator function supported */

 #endif /* _FC_FCP_H_ */
	/*
	* Copyright(c) 2007 Intel Corporation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
	*
	* Maintained at www.Open-FCoE.org
	*/

	#ifndef _FC_FCP_H_
	#define _FC_FCP_H_

	/*
	* Fibre Channel Protocol for SCSI.
	* From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
	*/

	/*
	* fc/fs.h defines FC_TYPE_FCP.
	*/

	/*
	* Service parameter page parameters (word 3 bits) for Process Login.
	*/
	#define FCP_SPPF_TASK_RETRY_ID 0x0200 /* task retry ID requested */
	#define FCP_SPPF_RETRY 0x0100 /* retry supported */
	#define FCP_SPPF_CONF_COMPL 0x0080 /* confirmed completion allowed */
	#define FCP_SPPF_OVLY_ALLOW 0x0040 /* data overlay allowed */
	#define FCP_SPPF_INIT_FCN 0x0020 /* initiator function */
	#define FCP_SPPF_TARG_FCN 0x0010 /* target function */
	#define FCP_SPPF_RD_XRDY_DIS 0x0002 /* disable XFER_RDY for reads */
	#define FCP_SPPF_WR_XRDY_DIS 0x0001 /* disable XFER_RDY for writes */

	/*
	* FCP_CMND IU Payload.
	*/
	struct fcp_cmnd {
	__u8 fc_lun[8]; /* logical unit number */
	__u8 fc_cmdref; /* command reference number */
	__u8 fc_pri_ta; /* priority and task attribute */
	__u8 fc_tm_flags; /* task management flags */
	__u8 fc_flags; /* additional len & flags */
	__u8 fc_cdb[16]; /* base CDB */
	__be32 fc_dl; /* data length (must follow fc_cdb) */
	};

	#define FCP_CMND_LEN 32 /* expected length of structure */

	struct fcp_cmnd32 {
	__u8 fc_lun[8]; /* logical unit number */
	__u8 fc_cmdref; /* command reference number */
	__u8 fc_pri_ta; /* priority and task attribute */
	__u8 fc_tm_flags; /* task management flags */
	__u8 fc_flags; /* additional len & flags */
	__u8 fc_cdb[32]; /* base CDB */
	__be32 fc_dl; /* data length (must follow fc_cdb) */
	};

	#define FCP_CMND32_LEN 48 /* expected length of structure */
	#define FCP_CMND32_ADD_LEN (16 / 4) /* Additional cdb length */

	/*
	* fc_pri_ta.
	*/
	#define FCP_PTA_SIMPLE 0 /* simple task attribute */
	#define FCP_PTA_HEADQ 1 /* head of queue task attribute */
	#define FCP_PTA_ORDERED 2 /* ordered task attribute */
	#define FCP_PTA_ACA 4 /* auto. contigent allegiance */
	#define FCP_PTA_MASK 7 /* mask for task attribute field */
	#define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */
	#define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */

	/*
	* fc_tm_flags - task management flags field.
	*/
	#define FCP_TMF_CLR_ACA 0x40 /* clear ACA condition */
	#define FCP_TMF_TGT_RESET 0x20 /* target reset task management,
	deprecated as of FCP-3 */
	#define FCP_TMF_LUN_RESET 0x10 /* logical unit reset task management */
	#define FCP_TMF_CLR_TASK_SET 0x04 /* clear task set */
	#define FCP_TMF_ABT_TASK_SET 0x02 /* abort task set */

	/*
	* fc_flags.
	* Bits 7:2 are the additional FCP_CDB length / 4.
	*/
	#define FCP_CFL_LEN_MASK 0xfc /* mask for additional length */
	#define FCP_CFL_LEN_SHIFT 2 /* shift bits for additional length */
	#define FCP_CFL_RDDATA 0x02 /* read data */
	#define FCP_CFL_WRDATA 0x01 /* write data */

	/*
	* FCP_TXRDY IU - transfer ready payload.
	*/
	struct fcp_txrdy {
	__be32 ft_data_ro; /* data relative offset */
	__be32 ft_burst_len; /* burst length */
	__u8 _ft_resvd[4]; /* reserved */
	};

	#define FCP_TXRDY_LEN 12 /* expected length of structure */

	/*
	* FCP_RESP IU - response payload.
	*
	* The response payload comes in three parts: the flags/status, the
	* sense/response lengths and the sense data/response info section.
	*
	* From FCP3r04, note 6 of section 9.5.13:
	*
	* Some early implementations presented the FCP_RSP IU without the FCP_RESID,
	* FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
	* FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
	* non-standard behavior should be tolerated.
	*
	* All response frames will always contain the fcp_resp template. Some
	* will also include the fcp_resp_len template.
	*/
	struct fcp_resp {
	__u8 _fr_resvd[8]; /* reserved */
	__be16 fr_retry_delay; /* retry delay timer */
	__u8 fr_flags; /* flags */
	__u8 fr_status; /* SCSI status code */
	};

	#define FCP_RESP_LEN 12 /* expected length of structure */

	struct fcp_resp_ext {
	__be32 fr_resid; /* Residual value */
	__be32 fr_sns_len; /* SCSI Sense length */
	__be32 fr_rsp_len; /* Response Info length */

	/*
	* Optionally followed by RSP info and/or SNS info and/or
	* bidirectional read residual length, if any.
	*/
	};

	#define FCP_RESP_EXT_LEN 12 /* expected length of the structure */

	struct fcp_resp_rsp_info {
	__u8 _fr_resvd[3]; /* reserved */
	__u8 rsp_code; /* Response Info Code */
	__u8 _fr_resvd2[4]; /* reserved */
	};

	struct fcp_resp_with_ext {
	struct fcp_resp resp;
	struct fcp_resp_ext ext;
	};

	#define FCP_RESP_WITH_EXT (FCP_RESP_LEN + FCP_RESP_EXT_LEN)

	/*
	* fr_flags.
	*/
	#define FCP_BIDI_RSP 0x80 /* bidirectional read response */
	#define FCP_BIDI_READ_UNDER 0x40 /* bidir. read less than requested */
	#define FCP_BIDI_READ_OVER 0x20 /* DL insufficient for full transfer */
	#define FCP_CONF_REQ 0x10 /* confirmation requested */
	#define FCP_RESID_UNDER 0x08 /* transfer shorter than expected */
	#define FCP_RESID_OVER 0x04 /* DL insufficient for full transfer */
	#define FCP_SNS_LEN_VAL 0x02 /* SNS_LEN field is valid */
	#define FCP_RSP_LEN_VAL 0x01 /* RSP_LEN field is valid */

	/*
	* rsp_codes
	*/
	enum fcp_resp_rsp_codes {
	FCP_TMF_CMPL = 0,
	FCP_DATA_LEN_INVALID = 1,
	FCP_CMND_FIELDS_INVALID = 2,
	FCP_DATA_PARAM_MISMATCH = 3,
	FCP_TMF_REJECTED = 4,
	FCP_TMF_FAILED = 5,
	FCP_TMF_INVALID_LUN = 9,
	};

	/*
	* FCP SRR Link Service request - Sequence Retransmission Request.
	*/
	struct fcp_srr {
	__u8 srr_op; /* opcode ELS_SRR */
	__u8 srr_resvd[3]; /* opcode / reserved - must be zero */
	__be16 srr_ox_id; /* OX_ID of failed command */
	__be16 srr_rx_id; /* RX_ID of failed command */
	__be32 srr_rel_off; /* relative offset */
	__u8 srr_r_ctl; /* r_ctl for the information unit */
	__u8 srr_resvd2[3]; /* reserved */
	};

	/*
	* Feature bits in name server FC-4 Features object.
	*/
	#define FCP_FEAT_TARG (1 << 0) /* target function supported */
	#define FCP_FEAT_INIT (1 << 1) /* initiator function supported */

	#endif /* _FC_FCP_H_ */