| /* |
| * NFC hardware simulation driver |
| * Copyright (c) 2013, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/nfc.h> |
| #include <net/nfc/nfc.h> |
| |
| #define DEV_ERR(_dev, fmt, args...) nfc_err(&_dev->nfc_dev->dev, \ |
| "%s: " fmt, __func__, ## args) |
| |
| #define DEV_DBG(_dev, fmt, args...) dev_dbg(&_dev->nfc_dev->dev, \ |
| "%s: " fmt, __func__, ## args) |
| |
| #define NFCSIM_VERSION "0.1" |
| |
| #define NFCSIM_POLL_NONE 0 |
| #define NFCSIM_POLL_INITIATOR 1 |
| #define NFCSIM_POLL_TARGET 2 |
| #define NFCSIM_POLL_DUAL (NFCSIM_POLL_INITIATOR | NFCSIM_POLL_TARGET) |
| |
| struct nfcsim { |
| struct nfc_dev *nfc_dev; |
| |
| struct mutex lock; |
| |
| struct delayed_work recv_work; |
| |
| struct sk_buff *clone_skb; |
| |
| struct delayed_work poll_work; |
| u8 polling_mode; |
| u8 curr_polling_mode; |
| |
| u8 shutting_down; |
| |
| u8 up; |
| |
| u8 initiator; |
| |
| data_exchange_cb_t cb; |
| void *cb_context; |
| |
| struct nfcsim *peer_dev; |
| }; |
| |
| static struct nfcsim *dev0; |
| static struct nfcsim *dev1; |
| |
| static struct workqueue_struct *wq; |
| |
| static void nfcsim_cleanup_dev(struct nfcsim *dev, u8 shutdown) |
| { |
| DEV_DBG(dev, "shutdown=%d\n", shutdown); |
| |
| mutex_lock(&dev->lock); |
| |
| dev->polling_mode = NFCSIM_POLL_NONE; |
| dev->shutting_down = shutdown; |
| dev->cb = NULL; |
| dev_kfree_skb(dev->clone_skb); |
| dev->clone_skb = NULL; |
| |
| mutex_unlock(&dev->lock); |
| |
| cancel_delayed_work_sync(&dev->poll_work); |
| cancel_delayed_work_sync(&dev->recv_work); |
| } |
| |
| static int nfcsim_target_found(struct nfcsim *dev) |
| { |
| struct nfc_target nfc_tgt; |
| |
| DEV_DBG(dev, "\n"); |
| |
| memset(&nfc_tgt, 0, sizeof(struct nfc_target)); |
| |
| nfc_tgt.supported_protocols = NFC_PROTO_NFC_DEP_MASK; |
| nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1); |
| |
| return 0; |
| } |
| |
| static int nfcsim_dev_up(struct nfc_dev *nfc_dev) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| |
| DEV_DBG(dev, "\n"); |
| |
| mutex_lock(&dev->lock); |
| |
| dev->up = 1; |
| |
| mutex_unlock(&dev->lock); |
| |
| return 0; |
| } |
| |
| static int nfcsim_dev_down(struct nfc_dev *nfc_dev) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| |
| DEV_DBG(dev, "\n"); |
| |
| mutex_lock(&dev->lock); |
| |
| dev->up = 0; |
| |
| mutex_unlock(&dev->lock); |
| |
| return 0; |
| } |
| |
| static int nfcsim_dep_link_up(struct nfc_dev *nfc_dev, |
| struct nfc_target *target, |
| u8 comm_mode, u8 *gb, size_t gb_len) |
| { |
| int rc; |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| struct nfcsim *peer = dev->peer_dev; |
| u8 *remote_gb; |
| size_t remote_gb_len; |
| |
| DEV_DBG(dev, "target_idx: %d, comm_mode: %d\n", target->idx, comm_mode); |
| |
| mutex_lock(&peer->lock); |
| |
| nfc_tm_activated(peer->nfc_dev, NFC_PROTO_NFC_DEP_MASK, |
| NFC_COMM_ACTIVE, gb, gb_len); |
| |
| remote_gb = nfc_get_local_general_bytes(peer->nfc_dev, &remote_gb_len); |
| if (!remote_gb) { |
| DEV_ERR(peer, "Can't get remote general bytes\n"); |
| |
| mutex_unlock(&peer->lock); |
| return -EINVAL; |
| } |
| |
| mutex_unlock(&peer->lock); |
| |
| mutex_lock(&dev->lock); |
| |
| rc = nfc_set_remote_general_bytes(nfc_dev, remote_gb, remote_gb_len); |
| if (rc) { |
| DEV_ERR(dev, "Can't set remote general bytes\n"); |
| mutex_unlock(&dev->lock); |
| return rc; |
| } |
| |
| rc = nfc_dep_link_is_up(nfc_dev, target->idx, NFC_COMM_ACTIVE, |
| NFC_RF_INITIATOR); |
| |
| mutex_unlock(&dev->lock); |
| |
| return rc; |
| } |
| |
| static int nfcsim_dep_link_down(struct nfc_dev *nfc_dev) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| |
| DEV_DBG(dev, "\n"); |
| |
| nfcsim_cleanup_dev(dev, 0); |
| |
| return 0; |
| } |
| |
| static int nfcsim_start_poll(struct nfc_dev *nfc_dev, |
| u32 im_protocols, u32 tm_protocols) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| int rc; |
| |
| mutex_lock(&dev->lock); |
| |
| if (dev->polling_mode != NFCSIM_POLL_NONE) { |
| DEV_ERR(dev, "Already in polling mode\n"); |
| rc = -EBUSY; |
| goto exit; |
| } |
| |
| if (im_protocols & NFC_PROTO_NFC_DEP_MASK) |
| dev->polling_mode |= NFCSIM_POLL_INITIATOR; |
| |
| if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) |
| dev->polling_mode |= NFCSIM_POLL_TARGET; |
| |
| if (dev->polling_mode == NFCSIM_POLL_NONE) { |
| DEV_ERR(dev, "Unsupported polling mode\n"); |
| rc = -EINVAL; |
| goto exit; |
| } |
| |
| dev->initiator = 0; |
| dev->curr_polling_mode = NFCSIM_POLL_NONE; |
| |
| queue_delayed_work(wq, &dev->poll_work, 0); |
| |
| DEV_DBG(dev, "Start polling: im: 0x%X, tm: 0x%X\n", im_protocols, |
| tm_protocols); |
| |
| rc = 0; |
| exit: |
| mutex_unlock(&dev->lock); |
| |
| return rc; |
| } |
| |
| static void nfcsim_stop_poll(struct nfc_dev *nfc_dev) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| |
| DEV_DBG(dev, "Stop poll\n"); |
| |
| mutex_lock(&dev->lock); |
| |
| dev->polling_mode = NFCSIM_POLL_NONE; |
| |
| mutex_unlock(&dev->lock); |
| |
| cancel_delayed_work_sync(&dev->poll_work); |
| } |
| |
| static int nfcsim_activate_target(struct nfc_dev *nfc_dev, |
| struct nfc_target *target, u32 protocol) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| |
| DEV_DBG(dev, "\n"); |
| |
| return -ENOTSUPP; |
| } |
| |
| static void nfcsim_deactivate_target(struct nfc_dev *nfc_dev, |
| struct nfc_target *target) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| |
| DEV_DBG(dev, "\n"); |
| } |
| |
| static void nfcsim_wq_recv(struct work_struct *work) |
| { |
| struct nfcsim *dev = container_of(work, struct nfcsim, |
| recv_work.work); |
| |
| mutex_lock(&dev->lock); |
| |
| if (dev->shutting_down || !dev->up || !dev->clone_skb) { |
| dev_kfree_skb(dev->clone_skb); |
| goto exit; |
| } |
| |
| if (dev->initiator) { |
| if (!dev->cb) { |
| DEV_ERR(dev, "Null recv callback\n"); |
| dev_kfree_skb(dev->clone_skb); |
| goto exit; |
| } |
| |
| dev->cb(dev->cb_context, dev->clone_skb, 0); |
| dev->cb = NULL; |
| } else { |
| nfc_tm_data_received(dev->nfc_dev, dev->clone_skb); |
| } |
| |
| exit: |
| dev->clone_skb = NULL; |
| |
| mutex_unlock(&dev->lock); |
| } |
| |
| static int nfcsim_tx(struct nfc_dev *nfc_dev, struct nfc_target *target, |
| struct sk_buff *skb, data_exchange_cb_t cb, |
| void *cb_context) |
| { |
| struct nfcsim *dev = nfc_get_drvdata(nfc_dev); |
| struct nfcsim *peer = dev->peer_dev; |
| int err; |
| |
| mutex_lock(&dev->lock); |
| |
| if (dev->shutting_down || !dev->up) { |
| mutex_unlock(&dev->lock); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| dev->cb = cb; |
| dev->cb_context = cb_context; |
| |
| mutex_unlock(&dev->lock); |
| |
| mutex_lock(&peer->lock); |
| |
| peer->clone_skb = skb_clone(skb, GFP_KERNEL); |
| |
| if (!peer->clone_skb) { |
| DEV_ERR(dev, "skb_clone failed\n"); |
| mutex_unlock(&peer->lock); |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| /* This simulates an arbitrary transmission delay between the 2 devices. |
| * If packet transmission occurs immediately between them, we have a |
| * non-stop flow of several tens of thousands SYMM packets per second |
| * and a burning cpu. |
| * |
| * TODO: Add support for a sysfs entry to control this delay. |
| */ |
| queue_delayed_work(wq, &peer->recv_work, msecs_to_jiffies(5)); |
| |
| mutex_unlock(&peer->lock); |
| |
| err = 0; |
| exit: |
| dev_kfree_skb(skb); |
| |
| return err; |
| } |
| |
| static int nfcsim_im_transceive(struct nfc_dev *nfc_dev, |
| struct nfc_target *target, struct sk_buff *skb, |
| data_exchange_cb_t cb, void *cb_context) |
| { |
| return nfcsim_tx(nfc_dev, target, skb, cb, cb_context); |
| } |
| |
| static int nfcsim_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) |
| { |
| return nfcsim_tx(nfc_dev, NULL, skb, NULL, NULL); |
| } |
| |
| static struct nfc_ops nfcsim_nfc_ops = { |
| .dev_up = nfcsim_dev_up, |
| .dev_down = nfcsim_dev_down, |
| .dep_link_up = nfcsim_dep_link_up, |
| .dep_link_down = nfcsim_dep_link_down, |
| .start_poll = nfcsim_start_poll, |
| .stop_poll = nfcsim_stop_poll, |
| .activate_target = nfcsim_activate_target, |
| .deactivate_target = nfcsim_deactivate_target, |
| .im_transceive = nfcsim_im_transceive, |
| .tm_send = nfcsim_tm_send, |
| }; |
| |
| static void nfcsim_set_polling_mode(struct nfcsim *dev) |
| { |
| if (dev->polling_mode == NFCSIM_POLL_NONE) { |
| dev->curr_polling_mode = NFCSIM_POLL_NONE; |
| return; |
| } |
| |
| if (dev->curr_polling_mode == NFCSIM_POLL_NONE) { |
| if (dev->polling_mode & NFCSIM_POLL_INITIATOR) |
| dev->curr_polling_mode = NFCSIM_POLL_INITIATOR; |
| else |
| dev->curr_polling_mode = NFCSIM_POLL_TARGET; |
| |
| return; |
| } |
| |
| if (dev->polling_mode == NFCSIM_POLL_DUAL) { |
| if (dev->curr_polling_mode == NFCSIM_POLL_TARGET) |
| dev->curr_polling_mode = NFCSIM_POLL_INITIATOR; |
| else |
| dev->curr_polling_mode = NFCSIM_POLL_TARGET; |
| } |
| } |
| |
| static void nfcsim_wq_poll(struct work_struct *work) |
| { |
| struct nfcsim *dev = container_of(work, struct nfcsim, poll_work.work); |
| struct nfcsim *peer = dev->peer_dev; |
| |
| /* These work items run on an ordered workqueue and are therefore |
| * serialized. So we can take both mutexes without being dead locked. |
| */ |
| mutex_lock(&dev->lock); |
| mutex_lock(&peer->lock); |
| |
| nfcsim_set_polling_mode(dev); |
| |
| if (dev->curr_polling_mode == NFCSIM_POLL_NONE) { |
| DEV_DBG(dev, "Not polling\n"); |
| goto unlock; |
| } |
| |
| DEV_DBG(dev, "Polling as %s", |
| dev->curr_polling_mode == NFCSIM_POLL_INITIATOR ? |
| "initiator\n" : "target\n"); |
| |
| if (dev->curr_polling_mode == NFCSIM_POLL_TARGET) |
| goto sched_work; |
| |
| if (peer->curr_polling_mode == NFCSIM_POLL_TARGET) { |
| peer->polling_mode = NFCSIM_POLL_NONE; |
| dev->polling_mode = NFCSIM_POLL_NONE; |
| |
| dev->initiator = 1; |
| |
| nfcsim_target_found(dev); |
| |
| goto unlock; |
| } |
| |
| sched_work: |
| /* This defines the delay for an initiator to check if the other device |
| * is polling in target mode. |
| * If the device starts in dual mode polling, it switches between |
| * initiator and target at every round. |
| * Because the wq is ordered and only 1 work item is executed at a time, |
| * we'll always have one device polling as initiator and the other as |
| * target at some point, even if both are started in dual mode. |
| */ |
| queue_delayed_work(wq, &dev->poll_work, msecs_to_jiffies(200)); |
| |
| unlock: |
| mutex_unlock(&peer->lock); |
| mutex_unlock(&dev->lock); |
| } |
| |
| static struct nfcsim *nfcsim_init_dev(void) |
| { |
| struct nfcsim *dev; |
| int rc = -ENOMEM; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (dev == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| mutex_init(&dev->lock); |
| |
| INIT_DELAYED_WORK(&dev->recv_work, nfcsim_wq_recv); |
| INIT_DELAYED_WORK(&dev->poll_work, nfcsim_wq_poll); |
| |
| dev->nfc_dev = nfc_allocate_device(&nfcsim_nfc_ops, |
| NFC_PROTO_NFC_DEP_MASK, |
| 0, 0); |
| if (!dev->nfc_dev) |
| goto error; |
| |
| nfc_set_drvdata(dev->nfc_dev, dev); |
| |
| rc = nfc_register_device(dev->nfc_dev); |
| if (rc) |
| goto free_nfc_dev; |
| |
| return dev; |
| |
| free_nfc_dev: |
| nfc_free_device(dev->nfc_dev); |
| |
| error: |
| kfree(dev); |
| |
| return ERR_PTR(rc); |
| } |
| |
| static void nfcsim_free_device(struct nfcsim *dev) |
| { |
| nfc_unregister_device(dev->nfc_dev); |
| |
| nfc_free_device(dev->nfc_dev); |
| |
| kfree(dev); |
| } |
| |
| static int __init nfcsim_init(void) |
| { |
| int rc; |
| |
| /* We need an ordered wq to ensure that poll_work items are executed |
| * one at a time. |
| */ |
| wq = alloc_ordered_workqueue("nfcsim", 0); |
| if (!wq) { |
| rc = -ENOMEM; |
| goto exit; |
| } |
| |
| dev0 = nfcsim_init_dev(); |
| if (IS_ERR(dev0)) { |
| rc = PTR_ERR(dev0); |
| goto exit; |
| } |
| |
| dev1 = nfcsim_init_dev(); |
| if (IS_ERR(dev1)) { |
| kfree(dev0); |
| |
| rc = PTR_ERR(dev1); |
| goto exit; |
| } |
| |
| dev0->peer_dev = dev1; |
| dev1->peer_dev = dev0; |
| |
| pr_debug("NFCsim " NFCSIM_VERSION " initialized\n"); |
| |
| rc = 0; |
| exit: |
| if (rc) |
| pr_err("Failed to initialize nfcsim driver (%d)\n", |
| rc); |
| |
| return rc; |
| } |
| |
| static void __exit nfcsim_exit(void) |
| { |
| nfcsim_cleanup_dev(dev0, 1); |
| nfcsim_cleanup_dev(dev1, 1); |
| |
| nfcsim_free_device(dev0); |
| nfcsim_free_device(dev1); |
| |
| destroy_workqueue(wq); |
| } |
| |
| module_init(nfcsim_init); |
| module_exit(nfcsim_exit); |
| |
| MODULE_DESCRIPTION("NFCSim driver ver " NFCSIM_VERSION); |
| MODULE_VERSION(NFCSIM_VERSION); |
| MODULE_LICENSE("GPL"); |