| /* |
| * Synopsys G210 Test Chip driver |
| * |
| * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) |
| * |
| * Authors: Joao Pinto <jpinto@synopsys.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include "ufshcd.h" |
| #include "ufshcd-dwc.h" |
| #include "tc-dwc-g210.h" |
| |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| |
| /* Test Chip type expected values */ |
| #define TC_G210_20BIT 20 |
| #define TC_G210_40BIT 40 |
| #define TC_G210_INV 0 |
| |
| static int tc_type = TC_G210_INV; |
| module_param(tc_type, int, 0); |
| MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)"); |
| |
| static int tc_dwc_g210_pci_suspend(struct device *dev) |
| { |
| return ufshcd_system_suspend(dev_get_drvdata(dev)); |
| } |
| |
| static int tc_dwc_g210_pci_resume(struct device *dev) |
| { |
| return ufshcd_system_resume(dev_get_drvdata(dev)); |
| } |
| |
| static int tc_dwc_g210_pci_runtime_suspend(struct device *dev) |
| { |
| return ufshcd_runtime_suspend(dev_get_drvdata(dev)); |
| } |
| |
| static int tc_dwc_g210_pci_runtime_resume(struct device *dev) |
| { |
| return ufshcd_runtime_resume(dev_get_drvdata(dev)); |
| } |
| |
| static int tc_dwc_g210_pci_runtime_idle(struct device *dev) |
| { |
| return ufshcd_runtime_idle(dev_get_drvdata(dev)); |
| } |
| |
| /** |
| * struct ufs_hba_dwc_vops - UFS DWC specific variant operations |
| */ |
| static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = { |
| .name = "tc-dwc-g210-pci", |
| .link_startup_notify = ufshcd_dwc_link_startup_notify, |
| }; |
| |
| /** |
| * tc_dwc_g210_pci_shutdown - main function to put the controller in reset state |
| * @pdev: pointer to PCI device handle |
| */ |
| static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev) |
| { |
| ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev)); |
| } |
| |
| /** |
| * tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space |
| * data structure memory |
| * @pdev - pointer to PCI handle |
| */ |
| static void tc_dwc_g210_pci_remove(struct pci_dev *pdev) |
| { |
| struct ufs_hba *hba = pci_get_drvdata(pdev); |
| |
| pm_runtime_forbid(&pdev->dev); |
| pm_runtime_get_noresume(&pdev->dev); |
| ufshcd_remove(hba); |
| } |
| |
| /** |
| * tc_dwc_g210_pci_probe - probe routine of the driver |
| * @pdev: pointer to PCI device handle |
| * @id: PCI device id |
| * |
| * Returns 0 on success, non-zero value on failure |
| */ |
| static int |
| tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct ufs_hba *hba; |
| void __iomem *mmio_base; |
| int err; |
| |
| /* Check Test Chip type and set the specific setup routine */ |
| if (tc_type == TC_G210_20BIT) { |
| tc_dwc_g210_pci_hba_vops.phy_initialization = |
| tc_dwc_g210_config_20_bit; |
| } else if (tc_type == TC_G210_40BIT) { |
| tc_dwc_g210_pci_hba_vops.phy_initialization = |
| tc_dwc_g210_config_40_bit; |
| } else { |
| dev_err(&pdev->dev, "test chip version not specified\n"); |
| return -EPERM; |
| } |
| |
| err = pcim_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "pcim_enable_device failed\n"); |
| return err; |
| } |
| |
| pci_set_master(pdev); |
| |
| err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD); |
| if (err < 0) { |
| dev_err(&pdev->dev, "request and iomap failed\n"); |
| return err; |
| } |
| |
| mmio_base = pcim_iomap_table(pdev)[0]; |
| |
| err = ufshcd_alloc_host(&pdev->dev, &hba); |
| if (err) { |
| dev_err(&pdev->dev, "Allocation failed\n"); |
| return err; |
| } |
| |
| INIT_LIST_HEAD(&hba->clk_list_head); |
| |
| hba->vops = &tc_dwc_g210_pci_hba_vops; |
| |
| err = ufshcd_init(hba, mmio_base, pdev->irq); |
| if (err) { |
| dev_err(&pdev->dev, "Initialization failed\n"); |
| return err; |
| } |
| |
| pci_set_drvdata(pdev, hba); |
| pm_runtime_put_noidle(&pdev->dev); |
| pm_runtime_allow(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = { |
| .suspend = tc_dwc_g210_pci_suspend, |
| .resume = tc_dwc_g210_pci_resume, |
| .runtime_suspend = tc_dwc_g210_pci_runtime_suspend, |
| .runtime_resume = tc_dwc_g210_pci_runtime_resume, |
| .runtime_idle = tc_dwc_g210_pci_runtime_idle, |
| }; |
| |
| static const struct pci_device_id tc_dwc_g210_pci_tbl[] = { |
| { PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { } /* terminate list */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl); |
| |
| static struct pci_driver tc_dwc_g210_pci_driver = { |
| .name = "tc-dwc-g210-pci", |
| .id_table = tc_dwc_g210_pci_tbl, |
| .probe = tc_dwc_g210_pci_probe, |
| .remove = tc_dwc_g210_pci_remove, |
| .shutdown = tc_dwc_g210_pci_shutdown, |
| .driver = { |
| .pm = &tc_dwc_g210_pci_pm_ops |
| }, |
| }; |
| |
| module_pci_driver(tc_dwc_g210_pci_driver); |
| |
| MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); |
| MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |