| Marvell Armada CP110 System Controller 0 |
| ======================================== |
| |
| The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K |
| SoCs. It contains two sets of system control registers, System |
| Controller 0 and System Controller 1. This Device Tree binding allows |
| to describe the first system controller, which provides registers to |
| configure various aspects of the SoC. |
| |
| The Device Tree node representing this System Controller 0 provides a |
| number of clocks: |
| |
| - a set of core clocks |
| - a set of gatable clocks |
| |
| Those clocks can be referenced by other Device Tree nodes using two |
| cells: |
| - The first cell must be 0 or 1. 0 for the core clocks and 1 for the |
| gatable clocks. |
| - The second cell identifies the particular core clock or gatable |
| clocks. |
| |
| The following clocks are available: |
| - Core clocks |
| - 0 0 APLL |
| - 0 1 PPv2 core |
| - 0 2 EIP |
| - 0 3 Core |
| - 0 4 NAND core |
| - Gatable clocks |
| - 1 0 Audio |
| - 1 1 Comm Unit |
| - 1 2 NAND |
| - 1 3 PPv2 |
| - 1 4 SDIO |
| - 1 5 MG Domain |
| - 1 6 MG Core |
| - 1 7 XOR1 |
| - 1 8 XOR0 |
| - 1 9 GOP DP |
| - 1 11 PCIe x1 0 |
| - 1 12 PCIe x1 1 |
| - 1 13 PCIe x4 |
| - 1 14 PCIe / XOR |
| - 1 15 SATA |
| - 1 16 SATA USB |
| - 1 17 Main |
| - 1 18 SD/MMC/GOP |
| - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) |
| - 1 22 USB3H0 |
| - 1 23 USB3H1 |
| - 1 24 USB3 Device |
| - 1 25 EIP150 |
| - 1 26 EIP197 |
| |
| Required properties: |
| |
| - compatible: must be: |
| "marvell,cp110-system-controller0", "syscon"; |
| - reg: register area of the CP110 system controller 0 |
| - #clock-cells: must be set to 2 |
| - core-clock-output-names must be set to: |
| "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core" |
| - gate-clock-output-names must be set to: |
| "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", |
| "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", |
| "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", |
| "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", |
| "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; |
| |
| Example: |
| |
| cpm_syscon0: system-controller@440000 { |
| compatible = "marvell,cp110-system-controller0", "syscon"; |
| reg = <0x440000 0x1000>; |
| #clock-cells = <2>; |
| core-clock-output-names = "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core"; |
| gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", |
| "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", |
| "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", |
| "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", |
| "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; |
| }; |