arch/arm/boot/dts/omap3-devkit8000-common.dtsi - kernel/msm-4.19 - Gitiles

 /*
  * Author: Anil Kumar <anilk4.v@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <dt-bindings/input/input.h>

 #include "omap34xx.dtsi"
 / {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};

 	leds {
 		compatible = "gpio-leds";

 		heartbeat {
 			label = "devkit8000::led1";
 			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};

 		mmc {
 			label = "devkit8000::led2";
 			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
 			default-state = "on";
 			linux,default-trigger = "none";
 		};

 		usr {
 			label = "devkit8000::led3";
 			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
 			default-state = "on";
 			linux,default-trigger = "usr";
 		};

 		pmu_stat {
 			label = "devkit8000::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
 	};

 	sound {
 		compatible = "ti,omap-twl4030";
 		ti,model = "devkit8000";

 		ti,mcbsp = <&mcbsp2>;
 		ti,audio-routing =
 			"Ext Spk", "PREDRIVEL",
 			"Ext Spk", "PREDRIVER",
 			"MAINMIC", "Main Mic",
 			"Main Mic", "Mic Bias 1";
 	};

 	gpio_keys {
 		compatible = "gpio-keys";

 		user {
 			label = "user";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			linux,code = <BTN_EXTRA>;
 			wakeup-source;
 		};
 	};

 	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;

 				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_dvi_out>;
 				};
 			};

 			port@1 {
 				reg = <1>;

 				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};

 	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";

 		digital;

 		ddc-i2c-bus = <&i2c2>;

 		port {
 			dvi_connector_in: endpoint {
 				remote-endpoint = <&tfp410_out>;
 			};
 		};
 	};

 	tv0: connector1 {
 		compatible = "svideo-connector";
 		label = "tv";

 		port {
 			tv_connector_in: endpoint {
 				remote-endpoint = <&venc_out>;
 			};
 		};
 	};
 };

 &i2c1 {
 	clock-frequency = <2600000>;

 	twl: twl@48 {
 		reg = <0x48>;
 		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */

 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
 			};
 		};
 	};
 };

 &i2c2 {
 	clock-frequency = <400000>;
 };

 &i2c3 {
 	status = "disabled";
 };

 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"

 &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 };

 &mmc2 {
 	status = "disabled";
 };

 &mmc3 {
 	status = "disabled";
 };

 &twl_gpio {
 	ti,use-leds;
 	/*
 	 * pulldowns:
 	 * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
 	 * BIT(15), BIT(16), BIT(17)
 	 */
 	ti,pulldowns = <0x03a1c6>;
 };

 &twl_keypad {
 	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
 			MATRIX_KEY(1, 0, KEY_2)
 			MATRIX_KEY(2, 0, KEY_3)
 			MATRIX_KEY(0, 1, KEY_4)
 			MATRIX_KEY(1, 1, KEY_5)
 			MATRIX_KEY(2, 1, KEY_6)
 			MATRIX_KEY(3, 1, KEY_F5)
 			MATRIX_KEY(0, 2, KEY_7)
 			MATRIX_KEY(1, 2, KEY_8)
 			MATRIX_KEY(2, 2, KEY_9)
 			MATRIX_KEY(3, 2, KEY_F6)
 			MATRIX_KEY(0, 3, KEY_F7)
 			MATRIX_KEY(1, 3, KEY_0)
 			MATRIX_KEY(2, 3, KEY_F8)
 			MATRIX_KEY(4, 5, KEY_RESERVED)
 			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
 			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
 			>;
 };

 &wdt2 {
 	status = "disabled";
 };

 &mcbsp2 {
 	status = "okay";
 };

 &gpmc {
 	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */

 	nand@0,0 {
 		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "sw";

 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
 		gpmc,adv-on-ns = <6>;
 		gpmc,adv-rd-off-ns = <34>;
 		gpmc,adv-wr-off-ns = <44>;
 		gpmc,we-off-ns = <40>;
 		gpmc,oe-off-ns = <54>;
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;

 		#address-cells = <1>;
 		#size-cells = <1>;

 		x-loader@0 {
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};

 		bootloaders@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1e0000>;
 		};

 		bootloaders_env@260000 {
 			label = "U-Boot Env";
 			reg = <0x260000 0x20000>;
 		};

 		kernel@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x400000>;
 		};

 		filesystem@680000 {
 			label = "File System";
 			reg = <0x680000 0xf980000>;
 		};
 	};
 };

 &gpmc {
 	ranges = <6 0 0x2c000000 0x1000000>;       /* CS6: 16MB for DM9000 */

 	ethernet@0,0 {
 		compatible = "davicom,dm9000";
 		reg =  <6 0x000 2
 			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
 		bank-width = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
 		davicom,no-eeprom;

 		gpmc,mux-add-data = <0>;
 		gpmc,device-width = <1>;
 		gpmc,wait-pin = <0>;
 		gpmc,cycle2cycle-samecsen = <1>;
 		gpmc,cycle2cycle-diffcsen = <1>;

 		gpmc,cs-on-ns = <6>;
 		gpmc,cs-rd-off-ns = <180>;
 		gpmc,cs-wr-off-ns = <180>;
 		gpmc,adv-on-ns = <0>;
 		gpmc,adv-rd-off-ns = <18>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
 		gpmc,we-on-ns = <54>;
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
 		gpmc,access-ns = <144>;
 		gpmc,page-burst-access-ns = <24>;
 		gpmc,bus-turnaround-ns = <90>;
 		gpmc,cycle2cycle-delay-ns = <90>;
 		gpmc,wait-monitoring-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,wr-access-ns = <0>;
 	};
 };

 &omap3_pmx_core {
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
 			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
 			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
 			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
 			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
 			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
 			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
 			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
 			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
 			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
 			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
 			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
 			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
 			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
 			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
 			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
 			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
 			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
 			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
 			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
 			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
 			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
 			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
 			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
 			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
 		>;
 	};
 };

 &vpll1 {
 	/* Needed for DSS */
 	regulator-name = "vdds_dsi";

 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 };

 &dss {
 	status = "ok";

 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_dpi_pins>;

 	vdds_dsi-supply = <&vpll1>;
 	vdda_dac-supply = <&vdac>;

 	port {
 		dpi_dvi_out: endpoint {
 			remote-endpoint = <&tfp410_in>;
 			data-lines = <24>;
 		};
 	};
 };

 &venc {
 	status = "ok";

 	vdda-supply = <&vdac>;

 	port {
 		venc_out: endpoint {
 			remote-endpoint = <&tv_connector_in>;
 			ti,channels = <2>;
 		};
 	};
 };
	/*
	* Author: Anil Kumar <anilk4.v@gmail.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <dt-bindings/input/input.h>

	#include "omap34xx.dtsi"
	/ {
	memory@80000000 {
	device_type = "memory";
	reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	leds {
	compatible = "gpio-leds";

	heartbeat {
	label = "devkit8000::led1";
	gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
	default-state = "on";
	linux,default-trigger = "heartbeat";
	};

	mmc {
	label = "devkit8000::led2";
	gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
	default-state = "on";
	linux,default-trigger = "none";
	};

	usr {
	label = "devkit8000::led3";
	gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
	default-state = "on";
	linux,default-trigger = "usr";
	};

	pmu_stat {
	label = "devkit8000::pmu_stat";
	gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
	};
	};

	sound {
	compatible = "ti,omap-twl4030";
	ti,model = "devkit8000";

	ti,mcbsp = <&mcbsp2>;
	ti,audio-routing =
	"Ext Spk", "PREDRIVEL",
	"Ext Spk", "PREDRIVER",
	"MAINMIC", "Main Mic",
	"Main Mic", "Mic Bias 1";
	};

	gpio_keys {
	compatible = "gpio-keys";

	user {
	label = "user";
	gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
	linux,code = <BTN_EXTRA>;
	wakeup-source;
	};
	};

	tfp410: encoder0 {
	compatible = "ti,tfp410";
	powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;

	tfp410_in: endpoint {
	remote-endpoint = <&dpi_dvi_out>;
	};
	};

	port@1 {
	reg = <1>;

	tfp410_out: endpoint {
	remote-endpoint = <&dvi_connector_in>;
	};
	};
	};
	};

	dvi0: connector0 {
	compatible = "dvi-connector";
	label = "dvi";

	digital;

	ddc-i2c-bus = <&i2c2>;

	port {
	dvi_connector_in: endpoint {
	remote-endpoint = <&tfp410_out>;
	};
	};
	};

	tv0: connector1 {
	compatible = "svideo-connector";
	label = "tv";

	port {
	tv_connector_in: endpoint {
	remote-endpoint = <&venc_out>;
	};
	};
	};
	};

	&i2c1 {
	clock-frequency = <2600000>;

	twl: twl@48 {
	reg = <0x48>;
	interrupts = <7>; /* SYS_NIRQ cascaded to intc */

	twl_audio: audio {
	compatible = "ti,twl4030-audio";
	codec {
	};
	};
	};
	};

	&i2c2 {
	clock-frequency = <400000>;
	};

	&i2c3 {
	status = "disabled";
	};

	#include "twl4030.dtsi"
	#include "twl4030_omap3.dtsi"

	&mmc1 {
	vmmc-supply = <&vmmc1>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	};

	&mmc2 {
	status = "disabled";
	};

	&mmc3 {
	status = "disabled";
	};

	&twl_gpio {
	ti,use-leds;
	/*
	* pulldowns:
	* BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
	* BIT(15), BIT(16), BIT(17)
	*/
	ti,pulldowns = <0x03a1c6>;
	};

	&twl_keypad {
	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
	MATRIX_KEY(1, 0, KEY_2)
	MATRIX_KEY(2, 0, KEY_3)
	MATRIX_KEY(0, 1, KEY_4)
	MATRIX_KEY(1, 1, KEY_5)
	MATRIX_KEY(2, 1, KEY_6)
	MATRIX_KEY(3, 1, KEY_F5)
	MATRIX_KEY(0, 2, KEY_7)
	MATRIX_KEY(1, 2, KEY_8)
	MATRIX_KEY(2, 2, KEY_9)
	MATRIX_KEY(3, 2, KEY_F6)
	MATRIX_KEY(0, 3, KEY_F7)
	MATRIX_KEY(1, 3, KEY_0)
	MATRIX_KEY(2, 3, KEY_F8)
	MATRIX_KEY(4, 5, KEY_RESERVED)
	MATRIX_KEY(4, 4, KEY_VOLUMEUP)
	MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
	>;
	};

	&wdt2 {
	status = "disabled";
	};

	&mcbsp2 {
	status = "okay";
	};

	&gpmc {
	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */

	nand@0,0 {
	compatible = "ti,omap2-nand";
	reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
	interrupt-parent = <&gpmc>;
	interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
	<1 IRQ_TYPE_NONE>; /* termcount */
	nand-bus-width = <16>;
	gpmc,device-width = <2>;
	ti,nand-ecc-opt = "sw";

	gpmc,sync-clk-ps = <0>;
	gpmc,cs-on-ns = <0>;
	gpmc,cs-rd-off-ns = <44>;
	gpmc,cs-wr-off-ns = <44>;
	gpmc,adv-on-ns = <6>;
	gpmc,adv-rd-off-ns = <34>;
	gpmc,adv-wr-off-ns = <44>;
	gpmc,we-off-ns = <40>;
	gpmc,oe-off-ns = <54>;
	gpmc,access-ns = <64>;
	gpmc,rd-cycle-ns = <82>;
	gpmc,wr-cycle-ns = <82>;
	gpmc,wr-access-ns = <40>;
	gpmc,wr-data-mux-bus-ns = <0>;

	#address-cells = <1>;
	#size-cells = <1>;

	x-loader@0 {
	label = "X-Loader";
	reg = <0 0x80000>;
	};

	bootloaders@80000 {
	label = "U-Boot";
	reg = <0x80000 0x1e0000>;
	};

	bootloaders_env@260000 {
	label = "U-Boot Env";
	reg = <0x260000 0x20000>;
	};

	kernel@280000 {
	label = "Kernel";
	reg = <0x280000 0x400000>;
	};

	filesystem@680000 {
	label = "File System";
	reg = <0x680000 0xf980000>;
	};
	};
	};

	&gpmc {
	ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */

	ethernet@0,0 {
	compatible = "davicom,dm9000";
	reg = <6 0x000 2
	6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
	bank-width = <2>;
	interrupt-parent = <&gpio1>;
	interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
	davicom,no-eeprom;

	gpmc,mux-add-data = <0>;
	gpmc,device-width = <1>;
	gpmc,wait-pin = <0>;
	gpmc,cycle2cycle-samecsen = <1>;
	gpmc,cycle2cycle-diffcsen = <1>;

	gpmc,cs-on-ns = <6>;
	gpmc,cs-rd-off-ns = <180>;
	gpmc,cs-wr-off-ns = <180>;
	gpmc,adv-on-ns = <0>;
	gpmc,adv-rd-off-ns = <18>;
	gpmc,adv-wr-off-ns = <48>;
	gpmc,oe-on-ns = <54>;
	gpmc,oe-off-ns = <168>;
	gpmc,we-on-ns = <54>;
	gpmc,we-off-ns = <168>;
	gpmc,rd-cycle-ns = <186>;
	gpmc,wr-cycle-ns = <186>;
	gpmc,access-ns = <144>;
	gpmc,page-burst-access-ns = <24>;
	gpmc,bus-turnaround-ns = <90>;
	gpmc,cycle2cycle-delay-ns = <90>;
	gpmc,wait-monitoring-ns = <0>;
	gpmc,clk-activation-ns = <0>;
	gpmc,wr-data-mux-bus-ns = <0>;
	gpmc,wr-access-ns = <0>;
	};
	};

	&omap3_pmx_core {
	dss_dpi_pins: pinmux_dss_dpi_pins {
	pinctrl-single,pins = <
	OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT \| MUX_MODE0) /* dss_pclk.dss_pclk */
	OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT \| MUX_MODE0) /* dss_hsync.dss_hsync */
	OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT \| MUX_MODE0) /* dss_vsync.dss_vsync */
	OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT \| MUX_MODE0) /* dss_acbias.dss_acbias */
	OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT \| MUX_MODE0) /* dss_data0.dss_data0 */
	OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT \| MUX_MODE0) /* dss_data1.dss_data1 */
	OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT \| MUX_MODE0) /* dss_data2.dss_data2 */
	OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT \| MUX_MODE0) /* dss_data3.dss_data3 */
	OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT \| MUX_MODE0) /* dss_data4.dss_data4 */
	OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT \| MUX_MODE0) /* dss_data5.dss_data5 */
	OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT \| MUX_MODE0) /* dss_data6.dss_data6 */
	OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT \| MUX_MODE0) /* dss_data7.dss_data7 */
	OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT \| MUX_MODE0) /* dss_data8.dss_data8 */
	OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT \| MUX_MODE0) /* dss_data9.dss_data9 */
	OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT \| MUX_MODE0) /* dss_data10.dss_data10 */
	OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT \| MUX_MODE0) /* dss_data11.dss_data11 */
	OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT \| MUX_MODE0) /* dss_data12.dss_data12 */
	OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT \| MUX_MODE0) /* dss_data13.dss_data13 */
	OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT \| MUX_MODE0) /* dss_data14.dss_data14 */
	OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT \| MUX_MODE0) /* dss_data15.dss_data15 */
	OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT \| MUX_MODE0) /* dss_data16.dss_data16 */
	OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT \| MUX_MODE0) /* dss_data17.dss_data17 */
	OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT \| MUX_MODE0) /* dss_data18.dss_data18 */
	OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT \| MUX_MODE0) /* dss_data19.dss_data19 */
	OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT \| MUX_MODE0) /* dss_data20.dss_data20 */
	OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT \| MUX_MODE0) /* dss_data21.dss_data21 */
	OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT \| MUX_MODE0) /* dss_data22.dss_data22 */
	OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT \| MUX_MODE0) /* dss_data23.dss_data23 */
	>;
	};
	};

	&vpll1 {
	/* Needed for DSS */
	regulator-name = "vdds_dsi";

	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	&dss {
	status = "ok";

	pinctrl-names = "default";
	pinctrl-0 = <&dss_dpi_pins>;

	vdds_dsi-supply = <&vpll1>;
	vdda_dac-supply = <&vdac>;

	port {
	dpi_dvi_out: endpoint {
	remote-endpoint = <&tfp410_in>;
	data-lines = <24>;
	};
	};
	};

	&venc {
	status = "ok";

	vdda-supply = <&vdac>;

	port {
	venc_out: endpoint {
	remote-endpoint = <&tv_connector_in>;
	ti,channels = <2>;
	};
	};
	};