| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #ifndef _I915_DRM_H_ |
| #define _I915_DRM_H_ |
| |
| #include "drm.h" |
| |
| /* Please note that modifications to all structs defined here are |
| * subject to backwards-compatibility constraints. |
| */ |
| |
| #ifdef __KERNEL__ |
| /* For use by IPS driver */ |
| extern unsigned long i915_read_mch_val(void); |
| extern bool i915_gpu_raise(void); |
| extern bool i915_gpu_lower(void); |
| extern bool i915_gpu_busy(void); |
| extern bool i915_gpu_turbo_disable(void); |
| #endif |
| |
| /* Each region is a minimum of 16k, and there are at most 255 of them. |
| */ |
| #define I915_NR_TEX_REGIONS 255 /* table size 2k - maximum due to use |
| * of chars for next/prev indices */ |
| #define I915_LOG_MIN_TEX_REGION_SIZE 14 |
| |
| typedef struct _drm_i915_init { |
| enum { |
| I915_INIT_DMA = 0x01, |
| I915_CLEANUP_DMA = 0x02, |
| I915_RESUME_DMA = 0x03 |
| } func; |
| unsigned int mmio_offset; |
| int sarea_priv_offset; |
| unsigned int ring_start; |
| unsigned int ring_end; |
| unsigned int ring_size; |
| unsigned int front_offset; |
| unsigned int back_offset; |
| unsigned int depth_offset; |
| unsigned int w; |
| unsigned int h; |
| unsigned int pitch; |
| unsigned int pitch_bits; |
| unsigned int back_pitch; |
| unsigned int depth_pitch; |
| unsigned int cpp; |
| unsigned int chipset; |
| } drm_i915_init_t; |
| |
| typedef struct _drm_i915_sarea { |
| struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1]; |
| int last_upload; /* last time texture was uploaded */ |
| int last_enqueue; /* last time a buffer was enqueued */ |
| int last_dispatch; /* age of the most recently dispatched buffer */ |
| int ctxOwner; /* last context to upload state */ |
| int texAge; |
| int pf_enabled; /* is pageflipping allowed? */ |
| int pf_active; |
| int pf_current_page; /* which buffer is being displayed? */ |
| int perf_boxes; /* performance boxes to be displayed */ |
| int width, height; /* screen size in pixels */ |
| |
| drm_handle_t front_handle; |
| int front_offset; |
| int front_size; |
| |
| drm_handle_t back_handle; |
| int back_offset; |
| int back_size; |
| |
| drm_handle_t depth_handle; |
| int depth_offset; |
| int depth_size; |
| |
| drm_handle_t tex_handle; |
| int tex_offset; |
| int tex_size; |
| int log_tex_granularity; |
| int pitch; |
| int rotation; /* 0, 90, 180 or 270 */ |
| int rotated_offset; |
| int rotated_size; |
| int rotated_pitch; |
| int virtualX, virtualY; |
| |
| unsigned int front_tiled; |
| unsigned int back_tiled; |
| unsigned int depth_tiled; |
| unsigned int rotated_tiled; |
| unsigned int rotated2_tiled; |
| |
| int pipeA_x; |
| int pipeA_y; |
| int pipeA_w; |
| int pipeA_h; |
| int pipeB_x; |
| int pipeB_y; |
| int pipeB_w; |
| int pipeB_h; |
| |
| /* fill out some space for old userspace triple buffer */ |
| drm_handle_t unused_handle; |
| __u32 unused1, unused2, unused3; |
| |
| /* buffer object handles for static buffers. May change |
| * over the lifetime of the client. |
| */ |
| __u32 front_bo_handle; |
| __u32 back_bo_handle; |
| __u32 unused_bo_handle; |
| __u32 depth_bo_handle; |
| |
| } drm_i915_sarea_t; |
| |
| /* due to userspace building against these headers we need some compat here */ |
| #define planeA_x pipeA_x |
| #define planeA_y pipeA_y |
| #define planeA_w pipeA_w |
| #define planeA_h pipeA_h |
| #define planeB_x pipeB_x |
| #define planeB_y pipeB_y |
| #define planeB_w pipeB_w |
| #define planeB_h pipeB_h |
| |
| /* Flags for perf_boxes |
| */ |
| #define I915_BOX_RING_EMPTY 0x1 |
| #define I915_BOX_FLIP 0x2 |
| #define I915_BOX_WAIT 0x4 |
| #define I915_BOX_TEXTURE_LOAD 0x8 |
| #define I915_BOX_LOST_CONTEXT 0x10 |
| |
| /* I915 specific ioctls |
| * The device specific ioctl range is 0x40 to 0x79. |
| */ |
| #define DRM_I915_INIT 0x00 |
| #define DRM_I915_FLUSH 0x01 |
| #define DRM_I915_FLIP 0x02 |
| #define DRM_I915_BATCHBUFFER 0x03 |
| #define DRM_I915_IRQ_EMIT 0x04 |
| #define DRM_I915_IRQ_WAIT 0x05 |
| #define DRM_I915_GETPARAM 0x06 |
| #define DRM_I915_SETPARAM 0x07 |
| #define DRM_I915_ALLOC 0x08 |
| #define DRM_I915_FREE 0x09 |
| #define DRM_I915_INIT_HEAP 0x0a |
| #define DRM_I915_CMDBUFFER 0x0b |
| #define DRM_I915_DESTROY_HEAP 0x0c |
| #define DRM_I915_SET_VBLANK_PIPE 0x0d |
| #define DRM_I915_GET_VBLANK_PIPE 0x0e |
| #define DRM_I915_VBLANK_SWAP 0x0f |
| #define DRM_I915_HWS_ADDR 0x11 |
| #define DRM_I915_GEM_INIT 0x13 |
| #define DRM_I915_GEM_EXECBUFFER 0x14 |
| #define DRM_I915_GEM_PIN 0x15 |
| #define DRM_I915_GEM_UNPIN 0x16 |
| #define DRM_I915_GEM_BUSY 0x17 |
| #define DRM_I915_GEM_THROTTLE 0x18 |
| #define DRM_I915_GEM_ENTERVT 0x19 |
| #define DRM_I915_GEM_LEAVEVT 0x1a |
| #define DRM_I915_GEM_CREATE 0x1b |
| #define DRM_I915_GEM_PREAD 0x1c |
| #define DRM_I915_GEM_PWRITE 0x1d |
| #define DRM_I915_GEM_MMAP 0x1e |
| #define DRM_I915_GEM_SET_DOMAIN 0x1f |
| #define DRM_I915_GEM_SW_FINISH 0x20 |
| #define DRM_I915_GEM_SET_TILING 0x21 |
| #define DRM_I915_GEM_GET_TILING 0x22 |
| #define DRM_I915_GEM_GET_APERTURE 0x23 |
| #define DRM_I915_GEM_MMAP_GTT 0x24 |
| #define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25 |
| #define DRM_I915_GEM_MADVISE 0x26 |
| #define DRM_I915_OVERLAY_PUT_IMAGE 0x27 |
| #define DRM_I915_OVERLAY_ATTRS 0x28 |
| #define DRM_I915_GEM_EXECBUFFER2 0x29 |
| #define DRM_I915_GET_SPRITE_COLORKEY 0x2a |
| #define DRM_I915_SET_SPRITE_COLORKEY 0x2b |
| |
| #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) |
| #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) |
| #define DRM_IOCTL_I915_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP) |
| #define DRM_IOCTL_I915_BATCHBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t) |
| #define DRM_IOCTL_I915_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t) |
| #define DRM_IOCTL_I915_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t) |
| #define DRM_IOCTL_I915_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t) |
| #define DRM_IOCTL_I915_SETPARAM DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t) |
| #define DRM_IOCTL_I915_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t) |
| #define DRM_IOCTL_I915_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t) |
| #define DRM_IOCTL_I915_INIT_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t) |
| #define DRM_IOCTL_I915_CMDBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t) |
| #define DRM_IOCTL_I915_DESTROY_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t) |
| #define DRM_IOCTL_I915_SET_VBLANK_PIPE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t) |
| #define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t) |
| #define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) |
| #define DRM_IOCTL_I915_HWS_ADDR DRM_IOW(DRM_COMMAND_BASE + DRM_I915_HWS_ADDR, struct drm_i915_gem_init) |
| #define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init) |
| #define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer) |
| #define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2) |
| #define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) |
| #define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) |
| #define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) |
| #define DRM_IOCTL_I915_GEM_THROTTLE DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE) |
| #define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT) |
| #define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT) |
| #define DRM_IOCTL_I915_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create) |
| #define DRM_IOCTL_I915_GEM_PREAD DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread) |
| #define DRM_IOCTL_I915_GEM_PWRITE DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite) |
| #define DRM_IOCTL_I915_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap) |
| #define DRM_IOCTL_I915_GEM_MMAP_GTT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt) |
| #define DRM_IOCTL_I915_GEM_SET_DOMAIN DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain) |
| #define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish) |
| #define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) |
| #define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling) |
| #define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture) |
| #define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id) |
| #define DRM_IOCTL_I915_GEM_MADVISE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise) |
| #define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image) |
| #define DRM_IOCTL_I915_OVERLAY_ATTRS DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs) |
| #define DRM_IOCTL_I915_SET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey) |
| #define DRM_IOCTL_I915_GET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey) |
| |
| /* Allow drivers to submit batchbuffers directly to hardware, relying |
| * on the security mechanisms provided by hardware. |
| */ |
| typedef struct drm_i915_batchbuffer { |
| int start; /* agp offset */ |
| int used; /* nr bytes in use */ |
| int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ |
| int DR4; /* window origin for GFX_OP_DRAWRECT_INFO */ |
| int num_cliprects; /* mulitpass with multiple cliprects? */ |
| struct drm_clip_rect __user *cliprects; /* pointer to userspace cliprects */ |
| } drm_i915_batchbuffer_t; |
| |
| /* As above, but pass a pointer to userspace buffer which can be |
| * validated by the kernel prior to sending to hardware. |
| */ |
| typedef struct _drm_i915_cmdbuffer { |
| char __user *buf; /* pointer to userspace command buffer */ |
| int sz; /* nr bytes in buf */ |
| int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ |
| int DR4; /* window origin for GFX_OP_DRAWRECT_INFO */ |
| int num_cliprects; /* mulitpass with multiple cliprects? */ |
| struct drm_clip_rect __user *cliprects; /* pointer to userspace cliprects */ |
| } drm_i915_cmdbuffer_t; |
| |
| /* Userspace can request & wait on irq's: |
| */ |
| typedef struct drm_i915_irq_emit { |
| int __user *irq_seq; |
| } drm_i915_irq_emit_t; |
| |
| typedef struct drm_i915_irq_wait { |
| int irq_seq; |
| } drm_i915_irq_wait_t; |
| |
| /* Ioctl to query kernel params: |
| */ |
| #define I915_PARAM_IRQ_ACTIVE 1 |
| #define I915_PARAM_ALLOW_BATCHBUFFER 2 |
| #define I915_PARAM_LAST_DISPATCH 3 |
| #define I915_PARAM_CHIPSET_ID 4 |
| #define I915_PARAM_HAS_GEM 5 |
| #define I915_PARAM_NUM_FENCES_AVAIL 6 |
| #define I915_PARAM_HAS_OVERLAY 7 |
| #define I915_PARAM_HAS_PAGEFLIPPING 8 |
| #define I915_PARAM_HAS_EXECBUF2 9 |
| #define I915_PARAM_HAS_BSD 10 |
| #define I915_PARAM_HAS_BLT 11 |
| #define I915_PARAM_HAS_RELAXED_FENCING 12 |
| #define I915_PARAM_HAS_COHERENT_RINGS 13 |
| #define I915_PARAM_HAS_EXEC_CONSTANTS 14 |
| #define I915_PARAM_HAS_RELAXED_DELTA 15 |
| #define I915_PARAM_HAS_GEN7_SOL_RESET 16 |
| #define I915_PARAM_HAS_LLC 17 |
| #define I915_PARAM_HAS_ALIASING_PPGTT 18 |
| |
| typedef struct drm_i915_getparam { |
| int param; |
| int __user *value; |
| } drm_i915_getparam_t; |
| |
| /* Ioctl to set kernel params: |
| */ |
| #define I915_SETPARAM_USE_MI_BATCHBUFFER_START 1 |
| #define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY 2 |
| #define I915_SETPARAM_ALLOW_BATCHBUFFER 3 |
| #define I915_SETPARAM_NUM_USED_FENCES 4 |
| |
| typedef struct drm_i915_setparam { |
| int param; |
| int value; |
| } drm_i915_setparam_t; |
| |
| /* A memory manager for regions of shared memory: |
| */ |
| #define I915_MEM_REGION_AGP 1 |
| |
| typedef struct drm_i915_mem_alloc { |
| int region; |
| int alignment; |
| int size; |
| int __user *region_offset; /* offset from start of fb or agp */ |
| } drm_i915_mem_alloc_t; |
| |
| typedef struct drm_i915_mem_free { |
| int region; |
| int region_offset; |
| } drm_i915_mem_free_t; |
| |
| typedef struct drm_i915_mem_init_heap { |
| int region; |
| int size; |
| int start; |
| } drm_i915_mem_init_heap_t; |
| |
| /* Allow memory manager to be torn down and re-initialized (eg on |
| * rotate): |
| */ |
| typedef struct drm_i915_mem_destroy_heap { |
| int region; |
| } drm_i915_mem_destroy_heap_t; |
| |
| /* Allow X server to configure which pipes to monitor for vblank signals |
| */ |
| #define DRM_I915_VBLANK_PIPE_A 1 |
| #define DRM_I915_VBLANK_PIPE_B 2 |
| |
| typedef struct drm_i915_vblank_pipe { |
| int pipe; |
| } drm_i915_vblank_pipe_t; |
| |
| /* Schedule buffer swap at given vertical blank: |
| */ |
| typedef struct drm_i915_vblank_swap { |
| drm_drawable_t drawable; |
| enum drm_vblank_seq_type seqtype; |
| unsigned int sequence; |
| } drm_i915_vblank_swap_t; |
| |
| typedef struct drm_i915_hws_addr { |
| __u64 addr; |
| } drm_i915_hws_addr_t; |
| |
| struct drm_i915_gem_init { |
| /** |
| * Beginning offset in the GTT to be managed by the DRM memory |
| * manager. |
| */ |
| __u64 gtt_start; |
| /** |
| * Ending offset in the GTT to be managed by the DRM memory |
| * manager. |
| */ |
| __u64 gtt_end; |
| }; |
| |
| struct drm_i915_gem_create { |
| /** |
| * Requested size for the object. |
| * |
| * The (page-aligned) allocated size for the object will be returned. |
| */ |
| __u64 size; |
| /** |
| * Returned handle for the object. |
| * |
| * Object handles are nonzero. |
| */ |
| __u32 handle; |
| __u32 pad; |
| }; |
| |
| struct drm_i915_gem_pread { |
| /** Handle for the object being read. */ |
| __u32 handle; |
| __u32 pad; |
| /** Offset into the object to read from */ |
| __u64 offset; |
| /** Length of data to read */ |
| __u64 size; |
| /** |
| * Pointer to write the data into. |
| * |
| * This is a fixed-size type for 32/64 compatibility. |
| */ |
| __u64 data_ptr; |
| }; |
| |
| struct drm_i915_gem_pwrite { |
| /** Handle for the object being written to. */ |
| __u32 handle; |
| __u32 pad; |
| /** Offset into the object to write to */ |
| __u64 offset; |
| /** Length of data to write */ |
| __u64 size; |
| /** |
| * Pointer to read the data from. |
| * |
| * This is a fixed-size type for 32/64 compatibility. |
| */ |
| __u64 data_ptr; |
| }; |
| |
| struct drm_i915_gem_mmap { |
| /** Handle for the object being mapped. */ |
| __u32 handle; |
| __u32 pad; |
| /** Offset in the object to map. */ |
| __u64 offset; |
| /** |
| * Length of data to map. |
| * |
| * The value will be page-aligned. |
| */ |
| __u64 size; |
| /** |
| * Returned pointer the data was mapped at. |
| * |
| * This is a fixed-size type for 32/64 compatibility. |
| */ |
| __u64 addr_ptr; |
| }; |
| |
| struct drm_i915_gem_mmap_gtt { |
| /** Handle for the object being mapped. */ |
| __u32 handle; |
| __u32 pad; |
| /** |
| * Fake offset to use for subsequent mmap call |
| * |
| * This is a fixed-size type for 32/64 compatibility. |
| */ |
| __u64 offset; |
| }; |
| |
| struct drm_i915_gem_set_domain { |
| /** Handle for the object */ |
| __u32 handle; |
| |
| /** New read domains */ |
| __u32 read_domains; |
| |
| /** New write domain */ |
| __u32 write_domain; |
| }; |
| |
| struct drm_i915_gem_sw_finish { |
| /** Handle for the object */ |
| __u32 handle; |
| }; |
| |
| struct drm_i915_gem_relocation_entry { |
| /** |
| * Handle of the buffer being pointed to by this relocation entry. |
| * |
| * It's appealing to make this be an index into the mm_validate_entry |
| * list to refer to the buffer, but this allows the driver to create |
| * a relocation list for state buffers and not re-write it per |
| * exec using the buffer. |
| */ |
| __u32 target_handle; |
| |
| /** |
| * Value to be added to the offset of the target buffer to make up |
| * the relocation entry. |
| */ |
| __u32 delta; |
| |
| /** Offset in the buffer the relocation entry will be written into */ |
| __u64 offset; |
| |
| /** |
| * Offset value of the target buffer that the relocation entry was last |
| * written as. |
| * |
| * If the buffer has the same offset as last time, we can skip syncing |
| * and writing the relocation. This value is written back out by |
| * the execbuffer ioctl when the relocation is written. |
| */ |
| __u64 presumed_offset; |
| |
| /** |
| * Target memory domains read by this operation. |
| */ |
| __u32 read_domains; |
| |
| /** |
| * Target memory domains written by this operation. |
| * |
| * Note that only one domain may be written by the whole |
| * execbuffer operation, so that where there are conflicts, |
| * the application will get -EINVAL back. |
| */ |
| __u32 write_domain; |
| }; |
| |
| /** @{ |
| * Intel memory domains |
| * |
| * Most of these just align with the various caches in |
| * the system and are used to flush and invalidate as |
| * objects end up cached in different domains. |
| */ |
| /** CPU cache */ |
| #define I915_GEM_DOMAIN_CPU 0x00000001 |
| /** Render cache, used by 2D and 3D drawing */ |
| #define I915_GEM_DOMAIN_RENDER 0x00000002 |
| /** Sampler cache, used by texture engine */ |
| #define I915_GEM_DOMAIN_SAMPLER 0x00000004 |
| /** Command queue, used to load batch buffers */ |
| #define I915_GEM_DOMAIN_COMMAND 0x00000008 |
| /** Instruction cache, used by shader programs */ |
| #define I915_GEM_DOMAIN_INSTRUCTION 0x00000010 |
| /** Vertex address cache */ |
| #define I915_GEM_DOMAIN_VERTEX 0x00000020 |
| /** GTT domain - aperture and scanout */ |
| #define I915_GEM_DOMAIN_GTT 0x00000040 |
| /** @} */ |
| |
| struct drm_i915_gem_exec_object { |
| /** |
| * User's handle for a buffer to be bound into the GTT for this |
| * operation. |
| */ |
| __u32 handle; |
| |
| /** Number of relocations to be performed on this buffer */ |
| __u32 relocation_count; |
| /** |
| * Pointer to array of struct drm_i915_gem_relocation_entry containing |
| * the relocations to be performed in this buffer. |
| */ |
| __u64 relocs_ptr; |
| |
| /** Required alignment in graphics aperture */ |
| __u64 alignment; |
| |
| /** |
| * Returned value of the updated offset of the object, for future |
| * presumed_offset writes. |
| */ |
| __u64 offset; |
| }; |
| |
| struct drm_i915_gem_execbuffer { |
| /** |
| * List of buffers to be validated with their relocations to be |
| * performend on them. |
| * |
| * This is a pointer to an array of struct drm_i915_gem_validate_entry. |
| * |
| * These buffers must be listed in an order such that all relocations |
| * a buffer is performing refer to buffers that have already appeared |
| * in the validate list. |
| */ |
| __u64 buffers_ptr; |
| __u32 buffer_count; |
| |
| /** Offset in the batchbuffer to start execution from. */ |
| __u32 batch_start_offset; |
| /** Bytes used in batchbuffer from batch_start_offset */ |
| __u32 batch_len; |
| __u32 DR1; |
| __u32 DR4; |
| __u32 num_cliprects; |
| /** This is a struct drm_clip_rect *cliprects */ |
| __u64 cliprects_ptr; |
| }; |
| |
| struct drm_i915_gem_exec_object2 { |
| /** |
| * User's handle for a buffer to be bound into the GTT for this |
| * operation. |
| */ |
| __u32 handle; |
| |
| /** Number of relocations to be performed on this buffer */ |
| __u32 relocation_count; |
| /** |
| * Pointer to array of struct drm_i915_gem_relocation_entry containing |
| * the relocations to be performed in this buffer. |
| */ |
| __u64 relocs_ptr; |
| |
| /** Required alignment in graphics aperture */ |
| __u64 alignment; |
| |
| /** |
| * Returned value of the updated offset of the object, for future |
| * presumed_offset writes. |
| */ |
| __u64 offset; |
| |
| #define EXEC_OBJECT_NEEDS_FENCE (1<<0) |
| __u64 flags; |
| __u64 rsvd1; |
| __u64 rsvd2; |
| }; |
| |
| struct drm_i915_gem_execbuffer2 { |
| /** |
| * List of gem_exec_object2 structs |
| */ |
| __u64 buffers_ptr; |
| __u32 buffer_count; |
| |
| /** Offset in the batchbuffer to start execution from. */ |
| __u32 batch_start_offset; |
| /** Bytes used in batchbuffer from batch_start_offset */ |
| __u32 batch_len; |
| __u32 DR1; |
| __u32 DR4; |
| __u32 num_cliprects; |
| /** This is a struct drm_clip_rect *cliprects */ |
| __u64 cliprects_ptr; |
| #define I915_EXEC_RING_MASK (7<<0) |
| #define I915_EXEC_DEFAULT (0<<0) |
| #define I915_EXEC_RENDER (1<<0) |
| #define I915_EXEC_BSD (2<<0) |
| #define I915_EXEC_BLT (3<<0) |
| |
| /* Used for switching the constants addressing mode on gen4+ RENDER ring. |
| * Gen6+ only supports relative addressing to dynamic state (default) and |
| * absolute addressing. |
| * |
| * These flags are ignored for the BSD and BLT rings. |
| */ |
| #define I915_EXEC_CONSTANTS_MASK (3<<6) |
| #define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */ |
| #define I915_EXEC_CONSTANTS_ABSOLUTE (1<<6) |
| #define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */ |
| __u64 flags; |
| __u64 rsvd1; |
| __u64 rsvd2; |
| }; |
| |
| /** Resets the SO write offset registers for transform feedback on gen7. */ |
| #define I915_EXEC_GEN7_SOL_RESET (1<<8) |
| |
| struct drm_i915_gem_pin { |
| /** Handle of the buffer to be pinned. */ |
| __u32 handle; |
| __u32 pad; |
| |
| /** alignment required within the aperture */ |
| __u64 alignment; |
| |
| /** Returned GTT offset of the buffer. */ |
| __u64 offset; |
| }; |
| |
| struct drm_i915_gem_unpin { |
| /** Handle of the buffer to be unpinned. */ |
| __u32 handle; |
| __u32 pad; |
| }; |
| |
| struct drm_i915_gem_busy { |
| /** Handle of the buffer to check for busy */ |
| __u32 handle; |
| |
| /** Return busy status (1 if busy, 0 if idle) */ |
| __u32 busy; |
| }; |
| |
| #define I915_TILING_NONE 0 |
| #define I915_TILING_X 1 |
| #define I915_TILING_Y 2 |
| |
| #define I915_BIT_6_SWIZZLE_NONE 0 |
| #define I915_BIT_6_SWIZZLE_9 1 |
| #define I915_BIT_6_SWIZZLE_9_10 2 |
| #define I915_BIT_6_SWIZZLE_9_11 3 |
| #define I915_BIT_6_SWIZZLE_9_10_11 4 |
| /* Not seen by userland */ |
| #define I915_BIT_6_SWIZZLE_UNKNOWN 5 |
| /* Seen by userland. */ |
| #define I915_BIT_6_SWIZZLE_9_17 6 |
| #define I915_BIT_6_SWIZZLE_9_10_17 7 |
| |
| struct drm_i915_gem_set_tiling { |
| /** Handle of the buffer to have its tiling state updated */ |
| __u32 handle; |
| |
| /** |
| * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X, |
| * I915_TILING_Y). |
| * |
| * This value is to be set on request, and will be updated by the |
| * kernel on successful return with the actual chosen tiling layout. |
| * |
| * The tiling mode may be demoted to I915_TILING_NONE when the system |
| * has bit 6 swizzling that can't be managed correctly by GEM. |
| * |
| * Buffer contents become undefined when changing tiling_mode. |
| */ |
| __u32 tiling_mode; |
| |
| /** |
| * Stride in bytes for the object when in I915_TILING_X or |
| * I915_TILING_Y. |
| */ |
| __u32 stride; |
| |
| /** |
| * Returned address bit 6 swizzling required for CPU access through |
| * mmap mapping. |
| */ |
| __u32 swizzle_mode; |
| }; |
| |
| struct drm_i915_gem_get_tiling { |
| /** Handle of the buffer to get tiling state for. */ |
| __u32 handle; |
| |
| /** |
| * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X, |
| * I915_TILING_Y). |
| */ |
| __u32 tiling_mode; |
| |
| /** |
| * Returned address bit 6 swizzling required for CPU access through |
| * mmap mapping. |
| */ |
| __u32 swizzle_mode; |
| }; |
| |
| struct drm_i915_gem_get_aperture { |
| /** Total size of the aperture used by i915_gem_execbuffer, in bytes */ |
| __u64 aper_size; |
| |
| /** |
| * Available space in the aperture used by i915_gem_execbuffer, in |
| * bytes |
| */ |
| __u64 aper_available_size; |
| }; |
| |
| struct drm_i915_get_pipe_from_crtc_id { |
| /** ID of CRTC being requested **/ |
| __u32 crtc_id; |
| |
| /** pipe of requested CRTC **/ |
| __u32 pipe; |
| }; |
| |
| #define I915_MADV_WILLNEED 0 |
| #define I915_MADV_DONTNEED 1 |
| #define __I915_MADV_PURGED 2 /* internal state */ |
| |
| struct drm_i915_gem_madvise { |
| /** Handle of the buffer to change the backing store advice */ |
| __u32 handle; |
| |
| /* Advice: either the buffer will be needed again in the near future, |
| * or wont be and could be discarded under memory pressure. |
| */ |
| __u32 madv; |
| |
| /** Whether the backing store still exists. */ |
| __u32 retained; |
| }; |
| |
| /* flags */ |
| #define I915_OVERLAY_TYPE_MASK 0xff |
| #define I915_OVERLAY_YUV_PLANAR 0x01 |
| #define I915_OVERLAY_YUV_PACKED 0x02 |
| #define I915_OVERLAY_RGB 0x03 |
| |
| #define I915_OVERLAY_DEPTH_MASK 0xff00 |
| #define I915_OVERLAY_RGB24 0x1000 |
| #define I915_OVERLAY_RGB16 0x2000 |
| #define I915_OVERLAY_RGB15 0x3000 |
| #define I915_OVERLAY_YUV422 0x0100 |
| #define I915_OVERLAY_YUV411 0x0200 |
| #define I915_OVERLAY_YUV420 0x0300 |
| #define I915_OVERLAY_YUV410 0x0400 |
| |
| #define I915_OVERLAY_SWAP_MASK 0xff0000 |
| #define I915_OVERLAY_NO_SWAP 0x000000 |
| #define I915_OVERLAY_UV_SWAP 0x010000 |
| #define I915_OVERLAY_Y_SWAP 0x020000 |
| #define I915_OVERLAY_Y_AND_UV_SWAP 0x030000 |
| |
| #define I915_OVERLAY_FLAGS_MASK 0xff000000 |
| #define I915_OVERLAY_ENABLE 0x01000000 |
| |
| struct drm_intel_overlay_put_image { |
| /* various flags and src format description */ |
| __u32 flags; |
| /* source picture description */ |
| __u32 bo_handle; |
| /* stride values and offsets are in bytes, buffer relative */ |
| __u16 stride_Y; /* stride for packed formats */ |
| __u16 stride_UV; |
| __u32 offset_Y; /* offset for packet formats */ |
| __u32 offset_U; |
| __u32 offset_V; |
| /* in pixels */ |
| __u16 src_width; |
| __u16 src_height; |
| /* to compensate the scaling factors for partially covered surfaces */ |
| __u16 src_scan_width; |
| __u16 src_scan_height; |
| /* output crtc description */ |
| __u32 crtc_id; |
| __u16 dst_x; |
| __u16 dst_y; |
| __u16 dst_width; |
| __u16 dst_height; |
| }; |
| |
| /* flags */ |
| #define I915_OVERLAY_UPDATE_ATTRS (1<<0) |
| #define I915_OVERLAY_UPDATE_GAMMA (1<<1) |
| struct drm_intel_overlay_attrs { |
| __u32 flags; |
| __u32 color_key; |
| __s32 brightness; |
| __u32 contrast; |
| __u32 saturation; |
| __u32 gamma0; |
| __u32 gamma1; |
| __u32 gamma2; |
| __u32 gamma3; |
| __u32 gamma4; |
| __u32 gamma5; |
| }; |
| |
| /* |
| * Intel sprite handling |
| * |
| * Color keying works with a min/mask/max tuple. Both source and destination |
| * color keying is allowed. |
| * |
| * Source keying: |
| * Sprite pixels within the min & max values, masked against the color channels |
| * specified in the mask field, will be transparent. All other pixels will |
| * be displayed on top of the primary plane. For RGB surfaces, only the min |
| * and mask fields will be used; ranged compares are not allowed. |
| * |
| * Destination keying: |
| * Primary plane pixels that match the min value, masked against the color |
| * channels specified in the mask field, will be replaced by corresponding |
| * pixels from the sprite plane. |
| * |
| * Note that source & destination keying are exclusive; only one can be |
| * active on a given plane. |
| */ |
| |
| #define I915_SET_COLORKEY_NONE (1<<0) /* disable color key matching */ |
| #define I915_SET_COLORKEY_DESTINATION (1<<1) |
| #define I915_SET_COLORKEY_SOURCE (1<<2) |
| struct drm_intel_sprite_colorkey { |
| __u32 plane_id; |
| __u32 min_value; |
| __u32 channel_mask; |
| __u32 max_value; |
| __u32 flags; |
| }; |
| |
| #endif /* _I915_DRM_H_ */ |