include/linux/wimax.h - kernel/msm-4.19 - Gitiles

 /*
  * Linux WiMax
  * API for user space
  *
  *
  * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *   * Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *   * Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in
  *     the documentation and/or other materials provided with the
  *     distribution.
  *   * Neither the name of Intel Corporation nor the names of its
  *     contributors may be used to endorse or promote products derived
  *     from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *
  * Intel Corporation <linux-wimax@intel.com>
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *  - Initial implementation
  *
  *
  * This file declares the user/kernel protocol that is spoken over
  * Generic Netlink, as well as any type declaration that is to be used
  * by kernel and user space.
  *
  * It is intended for user space to clone it verbatim to use it as a
  * primary reference for definitions.
  *
  * Stuff intended for kernel usage as well as full protocol and stack
  * documentation is rooted in include/net/wimax.h.
  */

 #ifndef __LINUX__WIMAX_H__
 #define __LINUX__WIMAX_H__

 #include <linux/types.h>

 enum {
 	/**
 	 * Version of the interface (unsigned decimal, MMm, max 25.5)
 	 * M - Major: change if removing or modifying an existing call.
 	 * m - minor: change when adding a new call
 	 */
 	WIMAX_GNL_VERSION = 00,
 	/* Generic NetLink attributes */
 	WIMAX_GNL_ATTR_INVALID = 0x00,
 	WIMAX_GNL_ATTR_MAX = 10,
 };


 /*
  * Generic NetLink operations
  *
  * Most of these map to an API call; _OP_ stands for operation, _RP_
  * for reply and _RE_ for report (aka: signal).
  */
 enum {
 	WIMAX_GNL_OP_MSG_FROM_USER,	/* User to kernel message */
 	WIMAX_GNL_OP_MSG_TO_USER,	/* Kernel to user message */
 	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
 	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
 	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
 	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
 };


 /* Message from user / to user */
 enum {
 	WIMAX_GNL_MSG_IFIDX = 1,
 	WIMAX_GNL_MSG_PIPE_NAME,
 	WIMAX_GNL_MSG_DATA,
 };


 /*
  * wimax_rfkill()
  *
  * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
  * switch state (DISABLED/ENABLED).
  */
 enum wimax_rf_state {
 	WIMAX_RF_OFF = 0,	/* Radio is off, rfkill on/enabled */
 	WIMAX_RF_ON = 1,	/* Radio is on, rfkill off/disabled */
 	WIMAX_RF_QUERY = 2,
 };

 /* Attributes */
 enum {
 	WIMAX_GNL_RFKILL_IFIDX = 1,
 	WIMAX_GNL_RFKILL_STATE,
 };


 /* Attributes for wimax_reset() */
 enum {
 	WIMAX_GNL_RESET_IFIDX = 1,
 };

 /* Atributes for wimax_state_get() */
 enum {
 	WIMAX_GNL_STGET_IFIDX = 1,
 };

 /*
  * Attributes for the Report State Change
  *
  * For now we just have the old and new states; new attributes might
  * be added later on.
  */
 enum {
 	WIMAX_GNL_STCH_IFIDX = 1,
 	WIMAX_GNL_STCH_STATE_OLD,
 	WIMAX_GNL_STCH_STATE_NEW,
 };


 /**
  * enum wimax_st - The different states of a WiMAX device
  * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
  *     but still wimax_dev_add() hasn't been called. There is no state.
  *
  * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
  *     networking stacks, but it is not initialized (normally that is
  *     done with 'ifconfig DEV up' [or equivalent], which can upload
  *     firmware and enable communications with the device).
  *     In this state, the device is powered down and using as less
  *     power as possible.
  *     This state is the default after a call to wimax_dev_add(). It
  *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
  *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
  *     wimax_dev_add().
  *     It is recommended that the driver leaves this state when
  *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
  *     down'.
  *
  * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
  *     operations are allowed to proceed except the ones needed to
  *     complete the device clean up process.
  *
  * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
  *     is setup, but the device still requires some configuration
  *     before being operational.
  *     Some WiMAX API calls might work.
  *
  * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
  *     by hardware or software switches).
  *     It is recommended to always leave the device in this state
  *     after initialization.
  *
  * @WIMAX_ST_READY: The device is fully up and radio is on.
  *
  * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
  *     scan. In this state, the device cannot be actively connected to
  *     a network.
  *
  * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
  *     state exists because in some devices, the connect process can
  *     include a number of negotiations between user space, kernel
  *     space and the device. User space needs to know what the device
  *     is doing. If the connect sequence in a device is atomic and
  *     fast, the device can transition directly to CONNECTED
  *
  * @WIMAX_ST_CONNECTED: The device is connected to a network.
  *
  * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
  *     maximum numeric value of states.
  *
  * Description:
  *
  * Transitions from one state to another one are atomic and can only
  * be caused in kernel space with wimax_state_change(). To read the
  * state, use wimax_state_get().
  *
  * States starting with __ are internal and shall not be used or
  * referred to by drivers or userspace. They look ugly, but that's the
  * point -- if any use is made non-internal to the stack, it is easier
  * to catch on review.
  *
  * All API operations [with well defined exceptions] will take the
  * device mutex before starting and then check the state. If the state
  * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
  * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
  * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
  *
  * The order of the definitions is important, so we can do numerical
  * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
  * to operate).
  */
 /*
  * The allowed state transitions are described in the table below
  * (states in rows can go to states in columns where there is an X):
  *
  *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
  *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
  * NULL         -    x
  * DOWN              -      x        x       x
  * QUIESCING         x      -
  * UNINITIALIZED            x        -       x
  * RADIO_OFF                x                -     x
  * READY                    x                x     -     x     x      x
  * SCANNING                 x                x     x     -     x      x
  * CONNECTING               x                x     x     x     -      x
  * CONNECTED                x                x     x                  -
  *
  * This table not available in kernel-doc because the formatting messes it up.
  */
  enum wimax_st {
 	__WIMAX_ST_NULL = 0,
 	WIMAX_ST_DOWN,
 	__WIMAX_ST_QUIESCING,
 	WIMAX_ST_UNINITIALIZED,
 	WIMAX_ST_RADIO_OFF,
 	WIMAX_ST_READY,
 	WIMAX_ST_SCANNING,
 	WIMAX_ST_CONNECTING,
 	WIMAX_ST_CONNECTED,
 	__WIMAX_ST_INVALID			/* Always keep last */
 };


 #endif /* #ifndef __LINUX__WIMAX_H__ */
	/*
	* Linux WiMax
	* API for user space
	*
	*
	* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name of Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*
	* Intel Corporation <linux-wimax@intel.com>
	* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
	* - Initial implementation
	*
	*
	* This file declares the user/kernel protocol that is spoken over
	* Generic Netlink, as well as any type declaration that is to be used
	* by kernel and user space.
	*
	* It is intended for user space to clone it verbatim to use it as a
	* primary reference for definitions.
	*
	* Stuff intended for kernel usage as well as full protocol and stack
	* documentation is rooted in include/net/wimax.h.
	*/

	#ifndef __LINUX__WIMAX_H__
	#define __LINUX__WIMAX_H__

	#include <linux/types.h>

	enum {
	/**
	* Version of the interface (unsigned decimal, MMm, max 25.5)
	* M - Major: change if removing or modifying an existing call.
	* m - minor: change when adding a new call
	*/
	WIMAX_GNL_VERSION = 00,
	/* Generic NetLink attributes */
	WIMAX_GNL_ATTR_INVALID = 0x00,
	WIMAX_GNL_ATTR_MAX = 10,
	};


	/*
	* Generic NetLink operations
	*
	* Most of these map to an API call; _OP_ stands for operation, _RP_
	* for reply and _RE_ for report (aka: signal).
	*/
	enum {
	WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */
	WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */
	WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */
	WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */
	WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */
	WIMAX_GNL_OP_STATE_GET, /* Request for current state */
	};


	/* Message from user / to user */
	enum {
	WIMAX_GNL_MSG_IFIDX = 1,
	WIMAX_GNL_MSG_PIPE_NAME,
	WIMAX_GNL_MSG_DATA,
	};


	/*
	* wimax_rfkill()
	*
	* The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
	* switch state (DISABLED/ENABLED).
	*/
	enum wimax_rf_state {
	WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */
	WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */
	WIMAX_RF_QUERY = 2,
	};

	/* Attributes */
	enum {
	WIMAX_GNL_RFKILL_IFIDX = 1,
	WIMAX_GNL_RFKILL_STATE,
	};


	/* Attributes for wimax_reset() */
	enum {
	WIMAX_GNL_RESET_IFIDX = 1,
	};

	/* Atributes for wimax_state_get() */
	enum {
	WIMAX_GNL_STGET_IFIDX = 1,
	};

	/*
	* Attributes for the Report State Change
	*
	* For now we just have the old and new states; new attributes might
	* be added later on.
	*/
	enum {
	WIMAX_GNL_STCH_IFIDX = 1,
	WIMAX_GNL_STCH_STATE_OLD,
	WIMAX_GNL_STCH_STATE_NEW,
	};


	/**
	* enum wimax_st - The different states of a WiMAX device
	* @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
	* but still wimax_dev_add() hasn't been called. There is no state.
	*
	* @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
	* networking stacks, but it is not initialized (normally that is
	* done with 'ifconfig DEV up' [or equivalent], which can upload
	* firmware and enable communications with the device).
	* In this state, the device is powered down and using as less
	* power as possible.
	* This state is the default after a call to wimax_dev_add(). It
	* is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
	* or %WIMAX_ST_RADIO_OFF in _probe() after the call to
	* wimax_dev_add().
	* It is recommended that the driver leaves this state when
	* calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
	* down'.
	*
	* @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
	* operations are allowed to proceed except the ones needed to
	* complete the device clean up process.
	*
	* @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
	* is setup, but the device still requires some configuration
	* before being operational.
	* Some WiMAX API calls might work.
	*
	* @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
	* by hardware or software switches).
	* It is recommended to always leave the device in this state
	* after initialization.
	*
	* @WIMAX_ST_READY: The device is fully up and radio is on.
	*
	* @WIMAX_ST_SCANNING: [optional] The device has been instructed to
	* scan. In this state, the device cannot be actively connected to
	* a network.
	*
	* @WIMAX_ST_CONNECTING: The device is connecting to a network. This
	* state exists because in some devices, the connect process can
	* include a number of negotiations between user space, kernel
	* space and the device. User space needs to know what the device
	* is doing. If the connect sequence in a device is atomic and
	* fast, the device can transition directly to CONNECTED
	*
	* @WIMAX_ST_CONNECTED: The device is connected to a network.
	*
	* @__WIMAX_ST_INVALID: This is an invalid state used to mark the
	* maximum numeric value of states.
	*
	* Description:
	*
	* Transitions from one state to another one are atomic and can only
	* be caused in kernel space with wimax_state_change(). To read the
	* state, use wimax_state_get().
	*
	* States starting with __ are internal and shall not be used or
	* referred to by drivers or userspace. They look ugly, but that's the
	* point -- if any use is made non-internal to the stack, it is easier
	* to catch on review.
	*
	* All API operations [with well defined exceptions] will take the
	* device mutex before starting and then check the state. If the state
	* is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
	* %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
	* -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
	*
	* The order of the definitions is important, so we can do numerical
	* comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
	* to operate).
	*/
	/*
	* The allowed state transitions are described in the table below
	* (states in rows can go to states in columns where there is an X):
	*
	* UNINI RADIO READY SCAN CONNEC CONNEC
	* NULL DOWN QUIESCING TIALIZED OFF NING TING TED
	* NULL - x
	* DOWN - x x x
	* QUIESCING x -
	* UNINITIALIZED x - x
	* RADIO_OFF x - x
	* READY x x - x x x
	* SCANNING x x x - x x
	* CONNECTING x x x x - x
	* CONNECTED x x x -
	*
	* This table not available in kernel-doc because the formatting messes it up.
	*/
	enum wimax_st {
	__WIMAX_ST_NULL = 0,
	WIMAX_ST_DOWN,
	__WIMAX_ST_QUIESCING,
	WIMAX_ST_UNINITIALIZED,
	WIMAX_ST_RADIO_OFF,
	WIMAX_ST_READY,
	WIMAX_ST_SCANNING,
	WIMAX_ST_CONNECTING,
	WIMAX_ST_CONNECTED,
	__WIMAX_ST_INVALID /* Always keep last */
	};


	#endif /* #ifndef __LINUX__WIMAX_H__ */