| /* |
| * |
| * |
| * Copyright (C) 2005 Mike Isely <isely@pobox.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-common.h> |
| #include <media/tuner.h> |
| #include "pvrusb2.h" |
| #include "pvrusb2-std.h" |
| #include "pvrusb2-util.h" |
| #include "pvrusb2-hdw.h" |
| #include "pvrusb2-i2c-core.h" |
| #include "pvrusb2-eeprom.h" |
| #include "pvrusb2-hdw-internal.h" |
| #include "pvrusb2-encoder.h" |
| #include "pvrusb2-debug.h" |
| #include "pvrusb2-fx2-cmd.h" |
| #include "pvrusb2-wm8775.h" |
| #include "pvrusb2-video-v4l.h" |
| #include "pvrusb2-cx2584x-v4l.h" |
| #include "pvrusb2-cs53l32a.h" |
| #include "pvrusb2-audio.h" |
| |
| #define TV_MIN_FREQ 55250000L |
| #define TV_MAX_FREQ 850000000L |
| |
| /* This defines a minimum interval that the decoder must remain quiet |
| before we are allowed to start it running. */ |
| #define TIME_MSEC_DECODER_WAIT 50 |
| |
| /* This defines a minimum interval that the encoder must remain quiet |
| before we are allowed to configure it. I had this originally set to |
| 50msec, but Martin Dauskardt <martin.dauskardt@gmx.de> reports that |
| things work better when it's set to 100msec. */ |
| #define TIME_MSEC_ENCODER_WAIT 100 |
| |
| /* This defines the minimum interval that the encoder must successfully run |
| before we consider that the encoder has run at least once since its |
| firmware has been loaded. This measurement is in important for cases |
| where we can't do something until we know that the encoder has been run |
| at least once. */ |
| #define TIME_MSEC_ENCODER_OK 250 |
| |
| static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; |
| static DEFINE_MUTEX(pvr2_unit_mtx); |
| |
| static int ctlchg; |
| static int procreload; |
| static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 }; |
| static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; |
| static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; |
| static int init_pause_msec; |
| |
| module_param(ctlchg, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value"); |
| module_param(init_pause_msec, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay"); |
| module_param(procreload, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(procreload, |
| "Attempt init failure recovery with firmware reload"); |
| module_param_array(tuner, int, NULL, 0444); |
| MODULE_PARM_DESC(tuner,"specify installed tuner type"); |
| module_param_array(video_std, int, NULL, 0444); |
| MODULE_PARM_DESC(video_std,"specify initial video standard"); |
| module_param_array(tolerance, int, NULL, 0444); |
| MODULE_PARM_DESC(tolerance,"specify stream error tolerance"); |
| |
| /* US Broadcast channel 3 (61.25 MHz), to help with testing */ |
| static int default_tv_freq = 61250000L; |
| /* 104.3 MHz, a usable FM station for my area */ |
| static int default_radio_freq = 104300000L; |
| |
| module_param_named(tv_freq, default_tv_freq, int, 0444); |
| MODULE_PARM_DESC(tv_freq, "specify initial television frequency"); |
| module_param_named(radio_freq, default_radio_freq, int, 0444); |
| MODULE_PARM_DESC(radio_freq, "specify initial radio frequency"); |
| |
| #define PVR2_CTL_WRITE_ENDPOINT 0x01 |
| #define PVR2_CTL_READ_ENDPOINT 0x81 |
| |
| #define PVR2_GPIO_IN 0x9008 |
| #define PVR2_GPIO_OUT 0x900c |
| #define PVR2_GPIO_DIR 0x9020 |
| |
| #define trace_firmware(...) pvr2_trace(PVR2_TRACE_FIRMWARE,__VA_ARGS__) |
| |
| #define PVR2_FIRMWARE_ENDPOINT 0x02 |
| |
| /* size of a firmware chunk */ |
| #define FIRMWARE_CHUNK_SIZE 0x2000 |
| |
| typedef void (*pvr2_subdev_update_func)(struct pvr2_hdw *, |
| struct v4l2_subdev *); |
| |
| static const pvr2_subdev_update_func pvr2_module_update_functions[] = { |
| [PVR2_CLIENT_ID_WM8775] = pvr2_wm8775_subdev_update, |
| [PVR2_CLIENT_ID_SAA7115] = pvr2_saa7115_subdev_update, |
| [PVR2_CLIENT_ID_MSP3400] = pvr2_msp3400_subdev_update, |
| [PVR2_CLIENT_ID_CX25840] = pvr2_cx25840_subdev_update, |
| [PVR2_CLIENT_ID_CS53L32A] = pvr2_cs53l32a_subdev_update, |
| }; |
| |
| static const char *module_names[] = { |
| [PVR2_CLIENT_ID_MSP3400] = "msp3400", |
| [PVR2_CLIENT_ID_CX25840] = "cx25840", |
| [PVR2_CLIENT_ID_SAA7115] = "saa7115", |
| [PVR2_CLIENT_ID_TUNER] = "tuner", |
| [PVR2_CLIENT_ID_DEMOD] = "tuner", |
| [PVR2_CLIENT_ID_CS53L32A] = "cs53l32a", |
| [PVR2_CLIENT_ID_WM8775] = "wm8775", |
| }; |
| |
| |
| static const unsigned char *module_i2c_addresses[] = { |
| [PVR2_CLIENT_ID_TUNER] = "\x60\x61\x62\x63", |
| [PVR2_CLIENT_ID_DEMOD] = "\x43", |
| [PVR2_CLIENT_ID_MSP3400] = "\x40", |
| [PVR2_CLIENT_ID_SAA7115] = "\x21", |
| [PVR2_CLIENT_ID_WM8775] = "\x1b", |
| [PVR2_CLIENT_ID_CX25840] = "\x44", |
| [PVR2_CLIENT_ID_CS53L32A] = "\x11", |
| }; |
| |
| |
| static const char *ir_scheme_names[] = { |
| [PVR2_IR_SCHEME_NONE] = "none", |
| [PVR2_IR_SCHEME_29XXX] = "29xxx", |
| [PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)", |
| [PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)", |
| [PVR2_IR_SCHEME_ZILOG] = "Zilog", |
| }; |
| |
| |
| /* Define the list of additional controls we'll dynamically construct based |
| on query of the cx2341x module. */ |
| struct pvr2_mpeg_ids { |
| const char *strid; |
| int id; |
| }; |
| static const struct pvr2_mpeg_ids mpeg_ids[] = { |
| { |
| .strid = "audio_layer", |
| .id = V4L2_CID_MPEG_AUDIO_ENCODING, |
| },{ |
| .strid = "audio_bitrate", |
| .id = V4L2_CID_MPEG_AUDIO_L2_BITRATE, |
| },{ |
| /* Already using audio_mode elsewhere :-( */ |
| .strid = "mpeg_audio_mode", |
| .id = V4L2_CID_MPEG_AUDIO_MODE, |
| },{ |
| .strid = "mpeg_audio_mode_extension", |
| .id = V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, |
| },{ |
| .strid = "audio_emphasis", |
| .id = V4L2_CID_MPEG_AUDIO_EMPHASIS, |
| },{ |
| .strid = "audio_crc", |
| .id = V4L2_CID_MPEG_AUDIO_CRC, |
| },{ |
| .strid = "video_aspect", |
| .id = V4L2_CID_MPEG_VIDEO_ASPECT, |
| },{ |
| .strid = "video_b_frames", |
| .id = V4L2_CID_MPEG_VIDEO_B_FRAMES, |
| },{ |
| .strid = "video_gop_size", |
| .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE, |
| },{ |
| .strid = "video_gop_closure", |
| .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, |
| },{ |
| .strid = "video_bitrate_mode", |
| .id = V4L2_CID_MPEG_VIDEO_BITRATE_MODE, |
| },{ |
| .strid = "video_bitrate", |
| .id = V4L2_CID_MPEG_VIDEO_BITRATE, |
| },{ |
| .strid = "video_bitrate_peak", |
| .id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, |
| },{ |
| .strid = "video_temporal_decimation", |
| .id = V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, |
| },{ |
| .strid = "stream_type", |
| .id = V4L2_CID_MPEG_STREAM_TYPE, |
| },{ |
| .strid = "video_spatial_filter_mode", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, |
| },{ |
| .strid = "video_spatial_filter", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, |
| },{ |
| .strid = "video_luma_spatial_filter_type", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, |
| },{ |
| .strid = "video_chroma_spatial_filter_type", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, |
| },{ |
| .strid = "video_temporal_filter_mode", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, |
| },{ |
| .strid = "video_temporal_filter", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, |
| },{ |
| .strid = "video_median_filter_type", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, |
| },{ |
| .strid = "video_luma_median_filter_top", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, |
| },{ |
| .strid = "video_luma_median_filter_bottom", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, |
| },{ |
| .strid = "video_chroma_median_filter_top", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, |
| },{ |
| .strid = "video_chroma_median_filter_bottom", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, |
| } |
| }; |
| #define MPEGDEF_COUNT ARRAY_SIZE(mpeg_ids) |
| |
| |
| static const char *control_values_srate[] = { |
| [V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100] = "44.1 kHz", |
| [V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000] = "48 kHz", |
| [V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000] = "32 kHz", |
| }; |
| |
| |
| |
| static const char *control_values_input[] = { |
| [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/ |
| [PVR2_CVAL_INPUT_DTV] = "dtv", |
| [PVR2_CVAL_INPUT_RADIO] = "radio", |
| [PVR2_CVAL_INPUT_SVIDEO] = "s-video", |
| [PVR2_CVAL_INPUT_COMPOSITE] = "composite", |
| }; |
| |
| |
| static const char *control_values_audiomode[] = { |
| [V4L2_TUNER_MODE_MONO] = "Mono", |
| [V4L2_TUNER_MODE_STEREO] = "Stereo", |
| [V4L2_TUNER_MODE_LANG1] = "Lang1", |
| [V4L2_TUNER_MODE_LANG2] = "Lang2", |
| [V4L2_TUNER_MODE_LANG1_LANG2] = "Lang1+Lang2", |
| }; |
| |
| |
| static const char *control_values_hsm[] = { |
| [PVR2_CVAL_HSM_FAIL] = "Fail", |
| [PVR2_CVAL_HSM_HIGH] = "High", |
| [PVR2_CVAL_HSM_FULL] = "Full", |
| }; |
| |
| |
| static const char *pvr2_state_names[] = { |
| [PVR2_STATE_NONE] = "none", |
| [PVR2_STATE_DEAD] = "dead", |
| [PVR2_STATE_COLD] = "cold", |
| [PVR2_STATE_WARM] = "warm", |
| [PVR2_STATE_ERROR] = "error", |
| [PVR2_STATE_READY] = "ready", |
| [PVR2_STATE_RUN] = "run", |
| }; |
| |
| |
| struct pvr2_fx2cmd_descdef { |
| unsigned char id; |
| unsigned char *desc; |
| }; |
| |
| static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = { |
| {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"}, |
| {FX2CMD_MEM_READ_DWORD, "read encoder dword"}, |
| {FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"}, |
| {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"}, |
| {FX2CMD_REG_WRITE, "write encoder register"}, |
| {FX2CMD_REG_READ, "read encoder register"}, |
| {FX2CMD_MEMSEL, "encoder memsel"}, |
| {FX2CMD_I2C_WRITE, "i2c write"}, |
| {FX2CMD_I2C_READ, "i2c read"}, |
| {FX2CMD_GET_USB_SPEED, "get USB speed"}, |
| {FX2CMD_STREAMING_ON, "stream on"}, |
| {FX2CMD_STREAMING_OFF, "stream off"}, |
| {FX2CMD_FWPOST1, "fwpost1"}, |
| {FX2CMD_POWER_OFF, "power off"}, |
| {FX2CMD_POWER_ON, "power on"}, |
| {FX2CMD_DEEP_RESET, "deep reset"}, |
| {FX2CMD_GET_EEPROM_ADDR, "get rom addr"}, |
| {FX2CMD_GET_IR_CODE, "get IR code"}, |
| {FX2CMD_HCW_DEMOD_RESETIN, "hcw demod resetin"}, |
| {FX2CMD_HCW_DTV_STREAMING_ON, "hcw dtv stream on"}, |
| {FX2CMD_HCW_DTV_STREAMING_OFF, "hcw dtv stream off"}, |
| {FX2CMD_ONAIR_DTV_STREAMING_ON, "onair dtv stream on"}, |
| {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"}, |
| {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"}, |
| {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"}, |
| }; |
| |
| |
| static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v); |
| static void pvr2_hdw_state_sched(struct pvr2_hdw *); |
| static int pvr2_hdw_state_eval(struct pvr2_hdw *); |
| static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long); |
| static void pvr2_hdw_worker_poll(struct work_struct *work); |
| static int pvr2_hdw_wait(struct pvr2_hdw *,int state); |
| static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *); |
| static void pvr2_hdw_state_log_state(struct pvr2_hdw *); |
| static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl); |
| static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw); |
| static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_quiescent_timeout(unsigned long); |
| static void pvr2_hdw_encoder_wait_timeout(unsigned long); |
| static void pvr2_hdw_encoder_run_timeout(unsigned long); |
| static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32); |
| static int pvr2_send_request_ex(struct pvr2_hdw *hdw, |
| unsigned int timeout,int probe_fl, |
| void *write_data,unsigned int write_len, |
| void *read_data,unsigned int read_len); |
| static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw); |
| |
| |
| static void trace_stbit(const char *name,int val) |
| { |
| pvr2_trace(PVR2_TRACE_STBITS, |
| "State bit %s <-- %s", |
| name,(val ? "true" : "false")); |
| } |
| |
| static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) { |
| *vp = hdw->freqTable[hdw->freqProgSlot-1]; |
| } else { |
| *vp = 0; |
| } |
| return 0; |
| } |
| |
| static int ctrl_channelfreq_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| unsigned int slotId = hdw->freqProgSlot; |
| if ((slotId > 0) && (slotId <= FREQTABLE_SIZE)) { |
| hdw->freqTable[slotId-1] = v; |
| /* Handle side effects correctly - if we're tuned to this |
| slot, then forgot the slot id relation since the stored |
| frequency has been changed. */ |
| if (hdw->freqSelector) { |
| if (hdw->freqSlotRadio == slotId) { |
| hdw->freqSlotRadio = 0; |
| } |
| } else { |
| if (hdw->freqSlotTelevision == slotId) { |
| hdw->freqSlotTelevision = 0; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static int ctrl_channelprog_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->freqProgSlot; |
| return 0; |
| } |
| |
| static int ctrl_channelprog_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if ((v >= 0) && (v <= FREQTABLE_SIZE)) { |
| hdw->freqProgSlot = v; |
| } |
| return 0; |
| } |
| |
| static int ctrl_channel_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| *vp = hdw->freqSelector ? hdw->freqSlotRadio : hdw->freqSlotTelevision; |
| return 0; |
| } |
| |
| static int ctrl_channel_set(struct pvr2_ctrl *cptr,int m,int slotId) |
| { |
| unsigned freq = 0; |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if ((slotId < 0) || (slotId > FREQTABLE_SIZE)) return 0; |
| if (slotId > 0) { |
| freq = hdw->freqTable[slotId-1]; |
| if (!freq) return 0; |
| pvr2_hdw_set_cur_freq(hdw,freq); |
| } |
| if (hdw->freqSelector) { |
| hdw->freqSlotRadio = slotId; |
| } else { |
| hdw->freqSlotTelevision = slotId; |
| } |
| return 0; |
| } |
| |
| static int ctrl_freq_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = pvr2_hdw_get_cur_freq(cptr->hdw); |
| return 0; |
| } |
| |
| static int ctrl_freq_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->freqDirty != 0; |
| } |
| |
| static void ctrl_freq_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->freqDirty = 0; |
| } |
| |
| static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| pvr2_hdw_set_cur_freq(cptr->hdw,v); |
| return 0; |
| } |
| |
| static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *left = cap->bounds.left; |
| return 0; |
| } |
| |
| static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *left = cap->bounds.left; |
| if (cap->bounds.width > cptr->hdw->cropw_val) { |
| *left += cap->bounds.width - cptr->hdw->cropw_val; |
| } |
| return 0; |
| } |
| |
| static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *top = cap->bounds.top; |
| return 0; |
| } |
| |
| static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *top = cap->bounds.top; |
| if (cap->bounds.height > cptr->hdw->croph_val) { |
| *top += cap->bounds.height - cptr->hdw->croph_val; |
| } |
| return 0; |
| } |
| |
| static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = 0; |
| if (cap->bounds.width > cptr->hdw->cropl_val) { |
| *val = cap->bounds.width - cptr->hdw->cropl_val; |
| } |
| return 0; |
| } |
| |
| static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = 0; |
| if (cap->bounds.height > cptr->hdw->cropt_val) { |
| *val = cap->bounds.height - cptr->hdw->cropt_val; |
| } |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->bounds.left; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->bounds.top; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->bounds.width; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->bounds.height; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->defrect.left; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->defrect.top; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->defrect.width; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->defrect.height; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->pixelaspect.numerator; |
| return 0; |
| } |
| |
| static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val) |
| { |
| struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; |
| int stat = pvr2_hdw_check_cropcap(cptr->hdw); |
| if (stat != 0) { |
| return stat; |
| } |
| *val = cap->pixelaspect.denominator; |
| return 0; |
| } |
| |
| static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| /* Actual maximum depends on the video standard in effect. */ |
| if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) { |
| *vp = 480; |
| } else { |
| *vp = 576; |
| } |
| return 0; |
| } |
| |
| static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| /* Actual minimum depends on device digitizer type. */ |
| if (cptr->hdw->hdw_desc->flag_has_cx25840) { |
| *vp = 75; |
| } else { |
| *vp = 17; |
| } |
| return 0; |
| } |
| |
| static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->input_val; |
| return 0; |
| } |
| |
| static int ctrl_check_input(struct pvr2_ctrl *cptr,int v) |
| { |
| return ((1 << v) & cptr->hdw->input_allowed_mask) != 0; |
| } |
| |
| static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| return pvr2_hdw_set_input(cptr->hdw,v); |
| } |
| |
| static int ctrl_isdirty_input(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->input_dirty != 0; |
| } |
| |
| static void ctrl_cleardirty_input(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->input_dirty = 0; |
| } |
| |
| |
| static int ctrl_freq_max_get(struct pvr2_ctrl *cptr, int *vp) |
| { |
| unsigned long fv; |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if (hdw->tuner_signal_stale) { |
| pvr2_hdw_status_poll(hdw); |
| } |
| fv = hdw->tuner_signal_info.rangehigh; |
| if (!fv) { |
| /* Safety fallback */ |
| *vp = TV_MAX_FREQ; |
| return 0; |
| } |
| if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) { |
| fv = (fv * 125) / 2; |
| } else { |
| fv = fv * 62500; |
| } |
| *vp = fv; |
| return 0; |
| } |
| |
| static int ctrl_freq_min_get(struct pvr2_ctrl *cptr, int *vp) |
| { |
| unsigned long fv; |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if (hdw->tuner_signal_stale) { |
| pvr2_hdw_status_poll(hdw); |
| } |
| fv = hdw->tuner_signal_info.rangelow; |
| if (!fv) { |
| /* Safety fallback */ |
| *vp = TV_MIN_FREQ; |
| return 0; |
| } |
| if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) { |
| fv = (fv * 125) / 2; |
| } else { |
| fv = fv * 62500; |
| } |
| *vp = fv; |
| return 0; |
| } |
| |
| static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->enc_stale != 0; |
| } |
| |
| static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->enc_stale = 0; |
| cptr->hdw->enc_unsafe_stale = 0; |
| } |
| |
| static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| int ret; |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs,0,sizeof(cs)); |
| memset(&c1,0,sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = cptr->info->v4l_id; |
| ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs, |
| VIDIOC_G_EXT_CTRLS); |
| if (ret) return ret; |
| *vp = c1.value; |
| return 0; |
| } |
| |
| static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| int ret; |
| struct pvr2_hdw *hdw = cptr->hdw; |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs,0,sizeof(cs)); |
| memset(&c1,0,sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = cptr->info->v4l_id; |
| c1.value = v; |
| ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state, |
| hdw->state_encoder_run, &cs, |
| VIDIOC_S_EXT_CTRLS); |
| if (ret == -EBUSY) { |
| /* Oops. cx2341x is telling us it's not safe to change |
| this control while we're capturing. Make a note of this |
| fact so that the pipeline will be stopped the next time |
| controls are committed. Then go on ahead and store this |
| change anyway. */ |
| ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state, |
| 0, &cs, |
| VIDIOC_S_EXT_CTRLS); |
| if (!ret) hdw->enc_unsafe_stale = !0; |
| } |
| if (ret) return ret; |
| hdw->enc_stale = !0; |
| return 0; |
| } |
| |
| static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr) |
| { |
| struct v4l2_queryctrl qctrl; |
| struct pvr2_ctl_info *info; |
| qctrl.id = cptr->info->v4l_id; |
| cx2341x_ctrl_query(&cptr->hdw->enc_ctl_state,&qctrl); |
| /* Strip out the const so we can adjust a function pointer. It's |
| OK to do this here because we know this is a dynamically created |
| control, so the underlying storage for the info pointer is (a) |
| private to us, and (b) not in read-only storage. Either we do |
| this or we significantly complicate the underlying control |
| implementation. */ |
| info = (struct pvr2_ctl_info *)(cptr->info); |
| if (qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY) { |
| if (info->set_value) { |
| info->set_value = NULL; |
| } |
| } else { |
| if (!(info->set_value)) { |
| info->set_value = ctrl_cx2341x_set; |
| } |
| } |
| return qctrl.flags; |
| } |
| |
| static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->state_pipeline_req; |
| return 0; |
| } |
| |
| static int ctrl_masterstate_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->master_state; |
| return 0; |
| } |
| |
| static int ctrl_hsm_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| int result = pvr2_hdw_is_hsm(cptr->hdw); |
| *vp = PVR2_CVAL_HSM_FULL; |
| if (result < 0) *vp = PVR2_CVAL_HSM_FAIL; |
| if (result) *vp = PVR2_CVAL_HSM_HIGH; |
| return 0; |
| } |
| |
| static int ctrl_stdavail_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->std_mask_avail; |
| return 0; |
| } |
| |
| static int ctrl_stdavail_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| v4l2_std_id ns; |
| ns = hdw->std_mask_avail; |
| ns = (ns & ~m) | (v & m); |
| if (ns == hdw->std_mask_avail) return 0; |
| hdw->std_mask_avail = ns; |
| pvr2_hdw_internal_set_std_avail(hdw); |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return 0; |
| } |
| |
| static int ctrl_std_val_to_sym(struct pvr2_ctrl *cptr,int msk,int val, |
| char *bufPtr,unsigned int bufSize, |
| unsigned int *len) |
| { |
| *len = pvr2_std_id_to_str(bufPtr,bufSize,msk & val); |
| return 0; |
| } |
| |
| static int ctrl_std_sym_to_val(struct pvr2_ctrl *cptr, |
| const char *bufPtr,unsigned int bufSize, |
| int *mskp,int *valp) |
| { |
| int ret; |
| v4l2_std_id id; |
| ret = pvr2_std_str_to_id(&id,bufPtr,bufSize); |
| if (ret < 0) return ret; |
| if (mskp) *mskp = id; |
| if (valp) *valp = id; |
| return 0; |
| } |
| |
| static int ctrl_stdcur_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->std_mask_cur; |
| return 0; |
| } |
| |
| static int ctrl_stdcur_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| v4l2_std_id ns; |
| ns = hdw->std_mask_cur; |
| ns = (ns & ~m) | (v & m); |
| if (ns == hdw->std_mask_cur) return 0; |
| hdw->std_mask_cur = ns; |
| hdw->std_dirty = !0; |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return 0; |
| } |
| |
| static int ctrl_stdcur_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->std_dirty != 0; |
| } |
| |
| static void ctrl_stdcur_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->std_dirty = 0; |
| } |
| |
| static int ctrl_signal_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| pvr2_hdw_status_poll(hdw); |
| *vp = hdw->tuner_signal_info.signal; |
| return 0; |
| } |
| |
| static int ctrl_audio_modes_present_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| int val = 0; |
| unsigned int subchan; |
| struct pvr2_hdw *hdw = cptr->hdw; |
| pvr2_hdw_status_poll(hdw); |
| subchan = hdw->tuner_signal_info.rxsubchans; |
| if (subchan & V4L2_TUNER_SUB_MONO) { |
| val |= (1 << V4L2_TUNER_MODE_MONO); |
| } |
| if (subchan & V4L2_TUNER_SUB_STEREO) { |
| val |= (1 << V4L2_TUNER_MODE_STEREO); |
| } |
| if (subchan & V4L2_TUNER_SUB_LANG1) { |
| val |= (1 << V4L2_TUNER_MODE_LANG1); |
| } |
| if (subchan & V4L2_TUNER_SUB_LANG2) { |
| val |= (1 << V4L2_TUNER_MODE_LANG2); |
| } |
| *vp = val; |
| return 0; |
| } |
| |
| |
| static int ctrl_stdenumcur_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if (v < 0) return -EINVAL; |
| if (v > hdw->std_enum_cnt) return -EINVAL; |
| hdw->std_enum_cur = v; |
| if (!v) return 0; |
| v--; |
| if (hdw->std_mask_cur == hdw->std_defs[v].id) return 0; |
| hdw->std_mask_cur = hdw->std_defs[v].id; |
| hdw->std_dirty = !0; |
| return 0; |
| } |
| |
| |
| static int ctrl_stdenumcur_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->std_enum_cur; |
| return 0; |
| } |
| |
| |
| static int ctrl_stdenumcur_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->std_dirty != 0; |
| } |
| |
| |
| static void ctrl_stdenumcur_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->std_dirty = 0; |
| } |
| |
| |
| #define DEFINT(vmin,vmax) \ |
| .type = pvr2_ctl_int, \ |
| .def.type_int.min_value = vmin, \ |
| .def.type_int.max_value = vmax |
| |
| #define DEFENUM(tab) \ |
| .type = pvr2_ctl_enum, \ |
| .def.type_enum.count = ARRAY_SIZE(tab), \ |
| .def.type_enum.value_names = tab |
| |
| #define DEFBOOL \ |
| .type = pvr2_ctl_bool |
| |
| #define DEFMASK(msk,tab) \ |
| .type = pvr2_ctl_bitmask, \ |
| .def.type_bitmask.valid_bits = msk, \ |
| .def.type_bitmask.bit_names = tab |
| |
| #define DEFREF(vname) \ |
| .set_value = ctrl_set_##vname, \ |
| .get_value = ctrl_get_##vname, \ |
| .is_dirty = ctrl_isdirty_##vname, \ |
| .clear_dirty = ctrl_cleardirty_##vname |
| |
| |
| #define VCREATE_FUNCS(vname) \ |
| static int ctrl_get_##vname(struct pvr2_ctrl *cptr,int *vp) \ |
| {*vp = cptr->hdw->vname##_val; return 0;} \ |
| static int ctrl_set_##vname(struct pvr2_ctrl *cptr,int m,int v) \ |
| {cptr->hdw->vname##_val = v; cptr->hdw->vname##_dirty = !0; return 0;} \ |
| static int ctrl_isdirty_##vname(struct pvr2_ctrl *cptr) \ |
| {return cptr->hdw->vname##_dirty != 0;} \ |
| static void ctrl_cleardirty_##vname(struct pvr2_ctrl *cptr) \ |
| {cptr->hdw->vname##_dirty = 0;} |
| |
| VCREATE_FUNCS(brightness) |
| VCREATE_FUNCS(contrast) |
| VCREATE_FUNCS(saturation) |
| VCREATE_FUNCS(hue) |
| VCREATE_FUNCS(volume) |
| VCREATE_FUNCS(balance) |
| VCREATE_FUNCS(bass) |
| VCREATE_FUNCS(treble) |
| VCREATE_FUNCS(mute) |
| VCREATE_FUNCS(cropl) |
| VCREATE_FUNCS(cropt) |
| VCREATE_FUNCS(cropw) |
| VCREATE_FUNCS(croph) |
| VCREATE_FUNCS(audiomode) |
| VCREATE_FUNCS(res_hor) |
| VCREATE_FUNCS(res_ver) |
| VCREATE_FUNCS(srate) |
| |
| /* Table definition of all controls which can be manipulated */ |
| static const struct pvr2_ctl_info control_defs[] = { |
| { |
| .v4l_id = V4L2_CID_BRIGHTNESS, |
| .desc = "Brightness", |
| .name = "brightness", |
| .default_value = 128, |
| DEFREF(brightness), |
| DEFINT(0,255), |
| },{ |
| .v4l_id = V4L2_CID_CONTRAST, |
| .desc = "Contrast", |
| .name = "contrast", |
| .default_value = 68, |
| DEFREF(contrast), |
| DEFINT(0,127), |
| },{ |
| .v4l_id = V4L2_CID_SATURATION, |
| .desc = "Saturation", |
| .name = "saturation", |
| .default_value = 64, |
| DEFREF(saturation), |
| DEFINT(0,127), |
| },{ |
| .v4l_id = V4L2_CID_HUE, |
| .desc = "Hue", |
| .name = "hue", |
| .default_value = 0, |
| DEFREF(hue), |
| DEFINT(-128,127), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_VOLUME, |
| .desc = "Volume", |
| .name = "volume", |
| .default_value = 62000, |
| DEFREF(volume), |
| DEFINT(0,65535), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_BALANCE, |
| .desc = "Balance", |
| .name = "balance", |
| .default_value = 0, |
| DEFREF(balance), |
| DEFINT(-32768,32767), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_BASS, |
| .desc = "Bass", |
| .name = "bass", |
| .default_value = 0, |
| DEFREF(bass), |
| DEFINT(-32768,32767), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_TREBLE, |
| .desc = "Treble", |
| .name = "treble", |
| .default_value = 0, |
| DEFREF(treble), |
| DEFINT(-32768,32767), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_MUTE, |
| .desc = "Mute", |
| .name = "mute", |
| .default_value = 0, |
| DEFREF(mute), |
| DEFBOOL, |
| }, { |
| .desc = "Capture crop left margin", |
| .name = "crop_left", |
| .internal_id = PVR2_CID_CROPL, |
| .default_value = 0, |
| DEFREF(cropl), |
| DEFINT(-129, 340), |
| .get_min_value = ctrl_cropl_min_get, |
| .get_max_value = ctrl_cropl_max_get, |
| .get_def_value = ctrl_get_cropcapdl, |
| }, { |
| .desc = "Capture crop top margin", |
| .name = "crop_top", |
| .internal_id = PVR2_CID_CROPT, |
| .default_value = 0, |
| DEFREF(cropt), |
| DEFINT(-35, 544), |
| .get_min_value = ctrl_cropt_min_get, |
| .get_max_value = ctrl_cropt_max_get, |
| .get_def_value = ctrl_get_cropcapdt, |
| }, { |
| .desc = "Capture crop width", |
| .name = "crop_width", |
| .internal_id = PVR2_CID_CROPW, |
| .default_value = 720, |
| DEFREF(cropw), |
| .get_max_value = ctrl_cropw_max_get, |
| .get_def_value = ctrl_get_cropcapdw, |
| }, { |
| .desc = "Capture crop height", |
| .name = "crop_height", |
| .internal_id = PVR2_CID_CROPH, |
| .default_value = 480, |
| DEFREF(croph), |
| .get_max_value = ctrl_croph_max_get, |
| .get_def_value = ctrl_get_cropcapdh, |
| }, { |
| .desc = "Capture capability pixel aspect numerator", |
| .name = "cropcap_pixel_numerator", |
| .internal_id = PVR2_CID_CROPCAPPAN, |
| .get_value = ctrl_get_cropcappan, |
| }, { |
| .desc = "Capture capability pixel aspect denominator", |
| .name = "cropcap_pixel_denominator", |
| .internal_id = PVR2_CID_CROPCAPPAD, |
| .get_value = ctrl_get_cropcappad, |
| }, { |
| .desc = "Capture capability bounds top", |
| .name = "cropcap_bounds_top", |
| .internal_id = PVR2_CID_CROPCAPBT, |
| .get_value = ctrl_get_cropcapbt, |
| }, { |
| .desc = "Capture capability bounds left", |
| .name = "cropcap_bounds_left", |
| .internal_id = PVR2_CID_CROPCAPBL, |
| .get_value = ctrl_get_cropcapbl, |
| }, { |
| .desc = "Capture capability bounds width", |
| .name = "cropcap_bounds_width", |
| .internal_id = PVR2_CID_CROPCAPBW, |
| .get_value = ctrl_get_cropcapbw, |
| }, { |
| .desc = "Capture capability bounds height", |
| .name = "cropcap_bounds_height", |
| .internal_id = PVR2_CID_CROPCAPBH, |
| .get_value = ctrl_get_cropcapbh, |
| },{ |
| .desc = "Video Source", |
| .name = "input", |
| .internal_id = PVR2_CID_INPUT, |
| .default_value = PVR2_CVAL_INPUT_TV, |
| .check_value = ctrl_check_input, |
| DEFREF(input), |
| DEFENUM(control_values_input), |
| },{ |
| .desc = "Audio Mode", |
| .name = "audio_mode", |
| .internal_id = PVR2_CID_AUDIOMODE, |
| .default_value = V4L2_TUNER_MODE_STEREO, |
| DEFREF(audiomode), |
| DEFENUM(control_values_audiomode), |
| },{ |
| .desc = "Horizontal capture resolution", |
| .name = "resolution_hor", |
| .internal_id = PVR2_CID_HRES, |
| .default_value = 720, |
| DEFREF(res_hor), |
| DEFINT(19,720), |
| },{ |
| .desc = "Vertical capture resolution", |
| .name = "resolution_ver", |
| .internal_id = PVR2_CID_VRES, |
| .default_value = 480, |
| DEFREF(res_ver), |
| DEFINT(17,576), |
| /* Hook in check for video standard and adjust maximum |
| depending on the standard. */ |
| .get_max_value = ctrl_vres_max_get, |
| .get_min_value = ctrl_vres_min_get, |
| },{ |
| .v4l_id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, |
| .default_value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, |
| .desc = "Audio Sampling Frequency", |
| .name = "srate", |
| DEFREF(srate), |
| DEFENUM(control_values_srate), |
| },{ |
| .desc = "Tuner Frequency (Hz)", |
| .name = "frequency", |
| .internal_id = PVR2_CID_FREQUENCY, |
| .default_value = 0, |
| .set_value = ctrl_freq_set, |
| .get_value = ctrl_freq_get, |
| .is_dirty = ctrl_freq_is_dirty, |
| .clear_dirty = ctrl_freq_clear_dirty, |
| DEFINT(0,0), |
| /* Hook in check for input value (tv/radio) and adjust |
| max/min values accordingly */ |
| .get_max_value = ctrl_freq_max_get, |
| .get_min_value = ctrl_freq_min_get, |
| },{ |
| .desc = "Channel", |
| .name = "channel", |
| .set_value = ctrl_channel_set, |
| .get_value = ctrl_channel_get, |
| DEFINT(0,FREQTABLE_SIZE), |
| },{ |
| .desc = "Channel Program Frequency", |
| .name = "freq_table_value", |
| .set_value = ctrl_channelfreq_set, |
| .get_value = ctrl_channelfreq_get, |
| DEFINT(0,0), |
| /* Hook in check for input value (tv/radio) and adjust |
| max/min values accordingly */ |
| .get_max_value = ctrl_freq_max_get, |
| .get_min_value = ctrl_freq_min_get, |
| },{ |
| .desc = "Channel Program ID", |
| .name = "freq_table_channel", |
| .set_value = ctrl_channelprog_set, |
| .get_value = ctrl_channelprog_get, |
| DEFINT(0,FREQTABLE_SIZE), |
| },{ |
| .desc = "Streaming Enabled", |
| .name = "streaming_enabled", |
| .get_value = ctrl_streamingenabled_get, |
| DEFBOOL, |
| },{ |
| .desc = "USB Speed", |
| .name = "usb_speed", |
| .get_value = ctrl_hsm_get, |
| DEFENUM(control_values_hsm), |
| },{ |
| .desc = "Master State", |
| .name = "master_state", |
| .get_value = ctrl_masterstate_get, |
| DEFENUM(pvr2_state_names), |
| },{ |
| .desc = "Signal Present", |
| .name = "signal_present", |
| .get_value = ctrl_signal_get, |
| DEFINT(0,65535), |
| },{ |
| .desc = "Audio Modes Present", |
| .name = "audio_modes_present", |
| .get_value = ctrl_audio_modes_present_get, |
| /* For this type we "borrow" the V4L2_TUNER_MODE enum from |
| v4l. Nothing outside of this module cares about this, |
| but I reuse it in order to also reuse the |
| control_values_audiomode string table. */ |
| DEFMASK(((1 << V4L2_TUNER_MODE_MONO)| |
| (1 << V4L2_TUNER_MODE_STEREO)| |
| (1 << V4L2_TUNER_MODE_LANG1)| |
| (1 << V4L2_TUNER_MODE_LANG2)), |
| control_values_audiomode), |
| },{ |
| .desc = "Video Standards Available Mask", |
| .name = "video_standard_mask_available", |
| .internal_id = PVR2_CID_STDAVAIL, |
| .skip_init = !0, |
| .get_value = ctrl_stdavail_get, |
| .set_value = ctrl_stdavail_set, |
| .val_to_sym = ctrl_std_val_to_sym, |
| .sym_to_val = ctrl_std_sym_to_val, |
| .type = pvr2_ctl_bitmask, |
| },{ |
| .desc = "Video Standards In Use Mask", |
| .name = "video_standard_mask_active", |
| .internal_id = PVR2_CID_STDCUR, |
| .skip_init = !0, |
| .get_value = ctrl_stdcur_get, |
| .set_value = ctrl_stdcur_set, |
| .is_dirty = ctrl_stdcur_is_dirty, |
| .clear_dirty = ctrl_stdcur_clear_dirty, |
| .val_to_sym = ctrl_std_val_to_sym, |
| .sym_to_val = ctrl_std_sym_to_val, |
| .type = pvr2_ctl_bitmask, |
| },{ |
| .desc = "Video Standard Name", |
| .name = "video_standard", |
| .internal_id = PVR2_CID_STDENUM, |
| .skip_init = !0, |
| .get_value = ctrl_stdenumcur_get, |
| .set_value = ctrl_stdenumcur_set, |
| .is_dirty = ctrl_stdenumcur_is_dirty, |
| .clear_dirty = ctrl_stdenumcur_clear_dirty, |
| .type = pvr2_ctl_enum, |
| } |
| }; |
| |
| #define CTRLDEF_COUNT ARRAY_SIZE(control_defs) |
| |
| |
| const char *pvr2_config_get_name(enum pvr2_config cfg) |
| { |
| switch (cfg) { |
| case pvr2_config_empty: return "empty"; |
| case pvr2_config_mpeg: return "mpeg"; |
| case pvr2_config_vbi: return "vbi"; |
| case pvr2_config_pcm: return "pcm"; |
| case pvr2_config_rawvideo: return "raw video"; |
| } |
| return "<unknown>"; |
| } |
| |
| |
| struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *hdw) |
| { |
| return hdw->usb_dev; |
| } |
| |
| |
| unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw) |
| { |
| return hdw->serial_number; |
| } |
| |
| |
| const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *hdw) |
| { |
| return hdw->bus_info; |
| } |
| |
| |
| const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *hdw) |
| { |
| return hdw->identifier; |
| } |
| |
| |
| unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *hdw) |
| { |
| return hdw->freqSelector ? hdw->freqValTelevision : hdw->freqValRadio; |
| } |
| |
| /* Set the currently tuned frequency and account for all possible |
| driver-core side effects of this action. */ |
| static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val) |
| { |
| if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| if (hdw->freqSelector) { |
| /* Swing over to radio frequency selection */ |
| hdw->freqSelector = 0; |
| hdw->freqDirty = !0; |
| } |
| if (hdw->freqValRadio != val) { |
| hdw->freqValRadio = val; |
| hdw->freqSlotRadio = 0; |
| hdw->freqDirty = !0; |
| } |
| } else { |
| if (!(hdw->freqSelector)) { |
| /* Swing over to television frequency selection */ |
| hdw->freqSelector = 1; |
| hdw->freqDirty = !0; |
| } |
| if (hdw->freqValTelevision != val) { |
| hdw->freqValTelevision = val; |
| hdw->freqSlotTelevision = 0; |
| hdw->freqDirty = !0; |
| } |
| } |
| } |
| |
| int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw) |
| { |
| return hdw->unit_number; |
| } |
| |
| |
| /* Attempt to locate one of the given set of files. Messages are logged |
| appropriate to what has been found. The return value will be 0 or |
| greater on success (it will be the index of the file name found) and |
| fw_entry will be filled in. Otherwise a negative error is returned on |
| failure. If the return value is -ENOENT then no viable firmware file |
| could be located. */ |
| static int pvr2_locate_firmware(struct pvr2_hdw *hdw, |
| const struct firmware **fw_entry, |
| const char *fwtypename, |
| unsigned int fwcount, |
| const char *fwnames[]) |
| { |
| unsigned int idx; |
| int ret = -EINVAL; |
| for (idx = 0; idx < fwcount; idx++) { |
| ret = request_firmware(fw_entry, |
| fwnames[idx], |
| &hdw->usb_dev->dev); |
| if (!ret) { |
| trace_firmware("Located %s firmware: %s;" |
| " uploading...", |
| fwtypename, |
| fwnames[idx]); |
| return idx; |
| } |
| if (ret == -ENOENT) continue; |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware fatal error with code=%d",ret); |
| return ret; |
| } |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "***WARNING***" |
| " Device %s firmware" |
| " seems to be missing.", |
| fwtypename); |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Did you install the pvrusb2 firmware files" |
| " in their proper location?"); |
| if (fwcount == 1) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware unable to locate %s file %s", |
| fwtypename,fwnames[0]); |
| } else { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware unable to locate" |
| " one of the following %s files:", |
| fwtypename); |
| for (idx = 0; idx < fwcount; idx++) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware: Failed to find %s", |
| fwnames[idx]); |
| } |
| } |
| return ret; |
| } |
| |
| |
| /* |
| * pvr2_upload_firmware1(). |
| * |
| * Send the 8051 firmware to the device. After the upload, arrange for |
| * device to re-enumerate. |
| * |
| * NOTE : the pointer to the firmware data given by request_firmware() |
| * is not suitable for an usb transaction. |
| * |
| */ |
| static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) |
| { |
| const struct firmware *fw_entry = NULL; |
| void *fw_ptr; |
| unsigned int pipe; |
| int ret; |
| u16 address; |
| |
| if (!hdw->hdw_desc->fx2_firmware.cnt) { |
| hdw->fw1_state = FW1_STATE_OK; |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Connected device type defines" |
| " no firmware to upload; ignoring firmware"); |
| return -ENOTTY; |
| } |
| |
| hdw->fw1_state = FW1_STATE_FAILED; // default result |
| |
| trace_firmware("pvr2_upload_firmware1"); |
| |
| ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller", |
| hdw->hdw_desc->fx2_firmware.cnt, |
| hdw->hdw_desc->fx2_firmware.lst); |
| if (ret < 0) { |
| if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING; |
| return ret; |
| } |
| |
| usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); |
| |
| pipe = usb_sndctrlpipe(hdw->usb_dev, 0); |
| |
| if (fw_entry->size != 0x2000){ |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS,"wrong fx2 firmware size"); |
| release_firmware(fw_entry); |
| return -ENOMEM; |
| } |
| |
| fw_ptr = kmalloc(0x800, GFP_KERNEL); |
| if (fw_ptr == NULL){ |
| release_firmware(fw_entry); |
| return -ENOMEM; |
| } |
| |
| /* We have to hold the CPU during firmware upload. */ |
| pvr2_hdw_cpureset_assert(hdw,1); |
| |
| /* upload the firmware to address 0000-1fff in 2048 (=0x800) bytes |
| chunk. */ |
| |
| ret = 0; |
| for(address = 0; address < fw_entry->size; address += 0x800) { |
| memcpy(fw_ptr, fw_entry->data + address, 0x800); |
| ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address, |
| 0, fw_ptr, 0x800, HZ); |
| } |
| |
| trace_firmware("Upload done, releasing device's CPU"); |
| |
| /* Now release the CPU. It will disconnect and reconnect later. */ |
| pvr2_hdw_cpureset_assert(hdw,0); |
| |
| kfree(fw_ptr); |
| release_firmware(fw_entry); |
| |
| trace_firmware("Upload done (%d bytes sent)",ret); |
| |
| /* We should have written 8192 bytes */ |
| if (ret == 8192) { |
| hdw->fw1_state = FW1_STATE_RELOAD; |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| |
| /* |
| * pvr2_upload_firmware2() |
| * |
| * This uploads encoder firmware on endpoint 2. |
| * |
| */ |
| |
| int pvr2_upload_firmware2(struct pvr2_hdw *hdw) |
| { |
| const struct firmware *fw_entry = NULL; |
| void *fw_ptr; |
| unsigned int pipe, fw_len, fw_done, bcnt, icnt; |
| int actual_length; |
| int ret = 0; |
| int fwidx; |
| static const char *fw_files[] = { |
| CX2341X_FIRM_ENC_FILENAME, |
| }; |
| |
| if (hdw->hdw_desc->flag_skip_cx23416_firmware) { |
| return 0; |
| } |
| |
| trace_firmware("pvr2_upload_firmware2"); |
| |
| ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder", |
| ARRAY_SIZE(fw_files), fw_files); |
| if (ret < 0) return ret; |
| fwidx = ret; |
| ret = 0; |
| /* Since we're about to completely reinitialize the encoder, |
| invalidate our cached copy of its configuration state. Next |
| time we configure the encoder, then we'll fully configure it. */ |
| hdw->enc_cur_valid = 0; |
| |
| /* Encoder is about to be reset so note that as far as we're |
| concerned now, the encoder has never been run. */ |
| del_timer_sync(&hdw->encoder_run_timer); |
| if (hdw->state_encoder_runok) { |
| hdw->state_encoder_runok = 0; |
| trace_stbit("state_encoder_runok",hdw->state_encoder_runok); |
| } |
| |
| /* First prepare firmware loading */ |
| ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/ |
| ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/ |
| ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/ |
| ret |= pvr2_hdw_cmd_deep_reset(hdw); |
| ret |= pvr2_write_register(hdw, 0xa064, 0x00000000); /*APU command*/ |
| ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000408); /*gpio dir*/ |
| ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/ |
| ret |= pvr2_write_register(hdw, 0x9058, 0xffffffed); /*VPU ctrl*/ |
| ret |= pvr2_write_register(hdw, 0x9054, 0xfffffffd); /*reset hw blocks*/ |
| ret |= pvr2_write_register(hdw, 0x07f8, 0x80000800); /*encoder SDRAM refresh*/ |
| ret |= pvr2_write_register(hdw, 0x07fc, 0x0000001a); /*encoder SDRAM pre-charge*/ |
| ret |= pvr2_write_register(hdw, 0x0700, 0x00000000); /*I2C clock*/ |
| ret |= pvr2_write_register(hdw, 0xaa00, 0x00000000); /*unknown*/ |
| ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/ |
| ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/ |
| ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/ |
| ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_FWPOST1); |
| ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16)); |
| |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "firmware2 upload prep failed, ret=%d",ret); |
| release_firmware(fw_entry); |
| goto done; |
| } |
| |
| /* Now send firmware */ |
| |
| fw_len = fw_entry->size; |
| |
| if (fw_len % sizeof(u32)) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "size of %s firmware" |
| " must be a multiple of %zu bytes", |
| fw_files[fwidx],sizeof(u32)); |
| release_firmware(fw_entry); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL); |
| if (fw_ptr == NULL){ |
| release_firmware(fw_entry); |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "failed to allocate memory for firmware2 upload"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT); |
| |
| fw_done = 0; |
| for (fw_done = 0; fw_done < fw_len;) { |
| bcnt = fw_len - fw_done; |
| if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE; |
| memcpy(fw_ptr, fw_entry->data + fw_done, bcnt); |
| /* Usbsnoop log shows that we must swap bytes... */ |
| /* Some background info: The data being swapped here is a |
| firmware image destined for the mpeg encoder chip that |
| lives at the other end of a USB endpoint. The encoder |
| chip always talks in 32 bit chunks and its storage is |
| organized into 32 bit words. However from the file |
| system to the encoder chip everything is purely a byte |
| stream. The firmware file's contents are always 32 bit |
| swapped from what the encoder expects. Thus the need |
| always exists to swap the bytes regardless of the endian |
| type of the host processor and therefore swab32() makes |
| the most sense. */ |
| for (icnt = 0; icnt < bcnt/4 ; icnt++) |
| ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]); |
| |
| ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt, |
| &actual_length, HZ); |
| ret |= (actual_length != bcnt); |
| if (ret) break; |
| fw_done += bcnt; |
| } |
| |
| trace_firmware("upload of %s : %i / %i ", |
| fw_files[fwidx],fw_done,fw_len); |
| |
| kfree(fw_ptr); |
| release_firmware(fw_entry); |
| |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "firmware2 upload transfer failure"); |
| goto done; |
| } |
| |
| /* Finish upload */ |
| |
| ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/ |
| ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/ |
| ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16)); |
| |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "firmware2 upload post-proc failure"); |
| } |
| |
| done: |
| if (hdw->hdw_desc->signal_routing_scheme == |
| PVR2_ROUTING_SCHEME_GOTVIEW) { |
| /* Ensure that GPIO 11 is set to output for GOTVIEW |
| hardware. */ |
| pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0); |
| } |
| return ret; |
| } |
| |
| |
| static const char *pvr2_get_state_name(unsigned int st) |
| { |
| if (st < ARRAY_SIZE(pvr2_state_names)) { |
| return pvr2_state_names[st]; |
| } |
| return "???"; |
| } |
| |
| static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl) |
| { |
| /* Even though we really only care about the video decoder chip at |
| this point, we'll broadcast stream on/off to all sub-devices |
| anyway, just in case somebody else wants to hear the |
| command... */ |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s", |
| (enablefl ? "on" : "off")); |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl); |
| if (hdw->decoder_client_id) { |
| /* We get here if the encoder has been noticed. Otherwise |
| we'll issue a warning to the user (which should |
| normally never happen). */ |
| return 0; |
| } |
| if (!hdw->flag_decoder_missed) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "WARNING: No decoder present"); |
| hdw->flag_decoder_missed = !0; |
| trace_stbit("flag_decoder_missed", |
| hdw->flag_decoder_missed); |
| } |
| return -EIO; |
| } |
| |
| |
| int pvr2_hdw_get_state(struct pvr2_hdw *hdw) |
| { |
| return hdw->master_state; |
| } |
| |
| |
| static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->flag_tripped) return 0; |
| hdw->flag_tripped = 0; |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Clearing driver error statuss"); |
| return !0; |
| } |
| |
| |
| int pvr2_hdw_untrip(struct pvr2_hdw *hdw) |
| { |
| int fl; |
| LOCK_TAKE(hdw->big_lock); do { |
| fl = pvr2_hdw_untrip_unlocked(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| if (fl) pvr2_hdw_state_sched(hdw); |
| return 0; |
| } |
| |
| |
| |
| |
| int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw) |
| { |
| return hdw->state_pipeline_req != 0; |
| } |
| |
| |
| int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag) |
| { |
| int ret,st; |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_hdw_untrip_unlocked(hdw); |
| if ((!enable_flag) != !(hdw->state_pipeline_req)) { |
| hdw->state_pipeline_req = enable_flag != 0; |
| pvr2_trace(PVR2_TRACE_START_STOP, |
| "/*--TRACE_STREAM--*/ %s", |
| enable_flag ? "enable" : "disable"); |
| } |
| pvr2_hdw_state_sched(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| if ((ret = pvr2_hdw_wait(hdw,0)) < 0) return ret; |
| if (enable_flag) { |
| while ((st = hdw->master_state) != PVR2_STATE_RUN) { |
| if (st != PVR2_STATE_READY) return -EIO; |
| if ((ret = pvr2_hdw_wait(hdw,st)) < 0) return ret; |
| } |
| } |
| return 0; |
| } |
| |
| |
| int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config) |
| { |
| int fl; |
| LOCK_TAKE(hdw->big_lock); |
| if ((fl = (hdw->desired_stream_type != config)) != 0) { |
| hdw->desired_stream_type = config; |
| hdw->state_pipeline_config = 0; |
| trace_stbit("state_pipeline_config", |
| hdw->state_pipeline_config); |
| pvr2_hdw_state_sched(hdw); |
| } |
| LOCK_GIVE(hdw->big_lock); |
| if (fl) return 0; |
| return pvr2_hdw_wait(hdw,0); |
| } |
| |
| |
| static int get_default_tuner_type(struct pvr2_hdw *hdw) |
| { |
| int unit_number = hdw->unit_number; |
| int tp = -1; |
| if ((unit_number >= 0) && (unit_number < PVR_NUM)) { |
| tp = tuner[unit_number]; |
| } |
| if (tp < 0) return -EINVAL; |
| hdw->tuner_type = tp; |
| hdw->tuner_updated = !0; |
| return 0; |
| } |
| |
| |
| static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw) |
| { |
| int unit_number = hdw->unit_number; |
| int tp = 0; |
| if ((unit_number >= 0) && (unit_number < PVR_NUM)) { |
| tp = video_std[unit_number]; |
| if (tp) return tp; |
| } |
| return 0; |
| } |
| |
| |
| static unsigned int get_default_error_tolerance(struct pvr2_hdw *hdw) |
| { |
| int unit_number = hdw->unit_number; |
| int tp = 0; |
| if ((unit_number >= 0) && (unit_number < PVR_NUM)) { |
| tp = tolerance[unit_number]; |
| } |
| return tp; |
| } |
| |
| |
| static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw) |
| { |
| /* Try a harmless request to fetch the eeprom's address over |
| endpoint 1. See what happens. Only the full FX2 image can |
| respond to this. If this probe fails then likely the FX2 |
| firmware needs be loaded. */ |
| int result; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR; |
| result = pvr2_send_request_ex(hdw,HZ*1,!0, |
| hdw->cmd_buffer,1, |
| hdw->cmd_buffer,1); |
| if (result < 0) break; |
| } while(0); LOCK_GIVE(hdw->ctl_lock); |
| if (result) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Probe of device endpoint 1 result status %d", |
| result); |
| } else { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Probe of device endpoint 1 succeeded"); |
| } |
| return result == 0; |
| } |
| |
| struct pvr2_std_hack { |
| v4l2_std_id pat; /* Pattern to match */ |
| v4l2_std_id msk; /* Which bits we care about */ |
| v4l2_std_id std; /* What additional standards or default to set */ |
| }; |
| |
| /* This data structure labels specific combinations of standards from |
| tveeprom that we'll try to recognize. If we recognize one, then assume |
| a specified default standard to use. This is here because tveeprom only |
| tells us about available standards not the intended default standard (if |
| any) for the device in question. We guess the default based on what has |
| been reported as available. Note that this is only for guessing a |
| default - which can always be overridden explicitly - and if the user |
| has otherwise named a default then that default will always be used in |
| place of this table. */ |
| static const struct pvr2_std_hack std_eeprom_maps[] = { |
| { /* PAL(B/G) */ |
| .pat = V4L2_STD_B|V4L2_STD_GH, |
| .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G, |
| }, |
| { /* NTSC(M) */ |
| .pat = V4L2_STD_MN, |
| .std = V4L2_STD_NTSC_M, |
| }, |
| { /* PAL(I) */ |
| .pat = V4L2_STD_PAL_I, |
| .std = V4L2_STD_PAL_I, |
| }, |
| { /* SECAM(L/L') */ |
| .pat = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, |
| .std = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, |
| }, |
| { /* PAL(D/D1/K) */ |
| .pat = V4L2_STD_DK, |
| .std = V4L2_STD_PAL_D|V4L2_STD_PAL_D1|V4L2_STD_PAL_K, |
| }, |
| }; |
| |
| static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) |
| { |
| char buf[40]; |
| unsigned int bcnt; |
| v4l2_std_id std1,std2,std3; |
| |
| std1 = get_default_standard(hdw); |
| std3 = std1 ? 0 : hdw->hdw_desc->default_std_mask; |
| |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom); |
| pvr2_trace(PVR2_TRACE_STD, |
| "Supported video standard(s) reported available" |
| " in hardware: %.*s", |
| bcnt,buf); |
| |
| hdw->std_mask_avail = hdw->std_mask_eeprom; |
| |
| std2 = (std1|std3) & ~hdw->std_mask_avail; |
| if (std2) { |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2); |
| pvr2_trace(PVR2_TRACE_STD, |
| "Expanding supported video standards" |
| " to include: %.*s", |
| bcnt,buf); |
| hdw->std_mask_avail |= std2; |
| } |
| |
| pvr2_hdw_internal_set_std_avail(hdw); |
| |
| if (std1) { |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1); |
| pvr2_trace(PVR2_TRACE_STD, |
| "Initial video standard forced to %.*s", |
| bcnt,buf); |
| hdw->std_mask_cur = std1; |
| hdw->std_dirty = !0; |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return; |
| } |
| if (std3) { |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3); |
| pvr2_trace(PVR2_TRACE_STD, |
| "Initial video standard" |
| " (determined by device type): %.*s",bcnt,buf); |
| hdw->std_mask_cur = std3; |
| hdw->std_dirty = !0; |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return; |
| } |
| |
| { |
| unsigned int idx; |
| for (idx = 0; idx < ARRAY_SIZE(std_eeprom_maps); idx++) { |
| if (std_eeprom_maps[idx].msk ? |
| ((std_eeprom_maps[idx].pat ^ |
| hdw->std_mask_eeprom) & |
| std_eeprom_maps[idx].msk) : |
| (std_eeprom_maps[idx].pat != |
| hdw->std_mask_eeprom)) continue; |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf), |
| std_eeprom_maps[idx].std); |
| pvr2_trace(PVR2_TRACE_STD, |
| "Initial video standard guessed as %.*s", |
| bcnt,buf); |
| hdw->std_mask_cur = std_eeprom_maps[idx].std; |
| hdw->std_dirty = !0; |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return; |
| } |
| } |
| |
| if (hdw->std_enum_cnt > 1) { |
| // Autoselect the first listed standard |
| hdw->std_enum_cur = 1; |
| hdw->std_mask_cur = hdw->std_defs[hdw->std_enum_cur-1].id; |
| hdw->std_dirty = !0; |
| pvr2_trace(PVR2_TRACE_STD, |
| "Initial video standard auto-selected to %s", |
| hdw->std_defs[hdw->std_enum_cur-1].name); |
| return; |
| } |
| |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Unable to select a viable initial video standard"); |
| } |
| |
| |
| static unsigned int pvr2_copy_i2c_addr_list( |
| unsigned short *dst, const unsigned char *src, |
| unsigned int dst_max) |
| { |
| unsigned int cnt = 0; |
| if (!src) return 0; |
| while (src[cnt] && (cnt + 1) < dst_max) { |
| dst[cnt] = src[cnt]; |
| cnt++; |
| } |
| dst[cnt] = I2C_CLIENT_END; |
| return cnt; |
| } |
| |
| |
| static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) |
| { |
| /* |
| Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness |
| for cx25840 causes that module to correctly set up its video |
| scaling. This is really a problem in the cx25840 module itself, |
| but we work around it here. The problem has not been seen in |
| ivtv because there VBI is supported and set up. We don't do VBI |
| here (at least not yet) and thus we never attempted to even set |
| it up. |
| */ |
| struct v4l2_format fmt; |
| if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) { |
| /* We're not using a cx25840 so don't enable the hack */ |
| return; |
| } |
| |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Module ID %u:" |
| " Executing cx25840 VBI hack", |
| hdw->decoder_client_id); |
| memset(&fmt, 0, sizeof(fmt)); |
| fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; |
| v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, |
| video, s_fmt, &fmt); |
| } |
| |
| |
| static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, |
| const struct pvr2_device_client_desc *cd) |
| { |
| const char *fname; |
| unsigned char mid; |
| struct v4l2_subdev *sd; |
| unsigned int i2ccnt; |
| const unsigned char *p; |
| /* Arbitrary count - max # i2c addresses we will probe */ |
| unsigned short i2caddr[25]; |
| |
| mid = cd->module_id; |
| fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL; |
| if (!fname) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Module ID %u for device %s has no name?" |
| " The driver might have a configuration problem.", |
| mid, |
| hdw->hdw_desc->description); |
| return -EINVAL; |
| } |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Module ID %u (%s) for device %s being loaded...", |
| mid, fname, |
| hdw->hdw_desc->description); |
| |
| i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, cd->i2c_address_list, |
| ARRAY_SIZE(i2caddr)); |
| if (!i2ccnt && ((p = (mid < ARRAY_SIZE(module_i2c_addresses)) ? |
| module_i2c_addresses[mid] : NULL) != NULL)) { |
| /* Second chance: Try default i2c address list */ |
| i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, p, |
| ARRAY_SIZE(i2caddr)); |
| if (i2ccnt) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Module ID %u:" |
| " Using default i2c address list", |
| mid); |
| } |
| } |
| |
| if (!i2ccnt) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Module ID %u (%s) for device %s:" |
| " No i2c addresses." |
| " The driver might have a configuration problem.", |
| mid, fname, hdw->hdw_desc->description); |
| return -EINVAL; |
| } |
| |
| /* Note how the 2nd and 3rd arguments are the same for |
| * v4l2_i2c_new_subdev(). Why? |
| * Well the 2nd argument is the module name to load, while the 3rd |
| * argument is documented in the framework as being the "chipid" - |
| * and every other place where I can find examples of this, the |
| * "chipid" appears to just be the module name again. So here we |
| * just do the same thing. */ |
| if (i2ccnt == 1) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Module ID %u:" |
| " Setting up with specified i2c address 0x%x", |
| mid, i2caddr[0]); |
| sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, |
| fname, fname, |
| i2caddr[0], NULL); |
| } else { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Module ID %u:" |
| " Setting up with address probe list", |
| mid); |
| sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, |
| fname, fname, |
| 0, i2caddr); |
| } |
| |
| if (!sd) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Module ID %u (%s) for device %s failed to load." |
| " Possible missing sub-device kernel module or" |
| " initialization failure within module.", |
| mid, fname, hdw->hdw_desc->description); |
| return -EIO; |
| } |
| |
| /* Tag this sub-device instance with the module ID we know about. |
| In other places we'll use that tag to determine if the instance |
| requires special handling. */ |
| sd->grp_id = mid; |
| |
| pvr2_trace(PVR2_TRACE_INFO, "Attached sub-driver %s", fname); |
| |
| |
| /* client-specific setup... */ |
| switch (mid) { |
| case PVR2_CLIENT_ID_CX25840: |
| case PVR2_CLIENT_ID_SAA7115: |
| hdw->decoder_client_id = mid; |
| break; |
| default: break; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void pvr2_hdw_load_modules(struct pvr2_hdw *hdw) |
| { |
| unsigned int idx; |
| const struct pvr2_string_table *cm; |
| const struct pvr2_device_client_table *ct; |
| int okFl = !0; |
| |
| cm = &hdw->hdw_desc->client_modules; |
| for (idx = 0; idx < cm->cnt; idx++) { |
| request_module(cm->lst[idx]); |
| } |
| |
| ct = &hdw->hdw_desc->client_table; |
| for (idx = 0; idx < ct->cnt; idx++) { |
| if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0; |
| } |
| if (!okFl) { |
| hdw->flag_modulefail = !0; |
| pvr2_hdw_render_useless(hdw); |
| } |
| } |
| |
| |
| static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) |
| { |
| int ret; |
| unsigned int idx; |
| struct pvr2_ctrl *cptr; |
| int reloadFl = 0; |
| if (hdw->hdw_desc->fx2_firmware.cnt) { |
| if (!reloadFl) { |
| reloadFl = |
| (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints |
| == 0); |
| if (reloadFl) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "USB endpoint config looks strange" |
| "; possibly firmware needs to be" |
| " loaded"); |
| } |
| } |
| if (!reloadFl) { |
| reloadFl = !pvr2_hdw_check_firmware(hdw); |
| if (reloadFl) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Check for FX2 firmware failed" |
| "; possibly firmware needs to be" |
| " loaded"); |
| } |
| } |
| if (reloadFl) { |
| if (pvr2_upload_firmware1(hdw) != 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failure uploading firmware1"); |
| } |
| return; |
| } |
| } |
| hdw->fw1_state = FW1_STATE_OK; |
| |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| hdw->force_dirty = !0; |
| |
| if (!hdw->hdw_desc->flag_no_powerup) { |
| pvr2_hdw_cmd_powerup(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| } |
| |
| /* Take the IR chip out of reset, if appropriate */ |
| if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) { |
| pvr2_issue_simple_cmd(hdw, |
| FX2CMD_HCW_ZILOG_RESET | |
| (1 << 8) | |
| ((0) << 16)); |
| } |
| |
| // This step MUST happen after the earlier powerup step. |
| pvr2_i2c_core_init(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| pvr2_hdw_load_modules(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, core, load_fw); |
| |
| for (idx = 0; idx < CTRLDEF_COUNT; idx++) { |
| cptr = hdw->controls + idx; |
| if (cptr->info->skip_init) continue; |
| if (!cptr->info->set_value) continue; |
| cptr->info->set_value(cptr,~0,cptr->info->default_value); |
| } |
| |
| pvr2_hdw_cx25840_vbi_hack(hdw); |
| |
| /* Set up special default values for the television and radio |
| frequencies here. It's not really important what these defaults |
| are, but I set them to something usable in the Chicago area just |
| to make driver testing a little easier. */ |
| |
| hdw->freqValTelevision = default_tv_freq; |
| hdw->freqValRadio = default_radio_freq; |
| |
| // Do not use pvr2_reset_ctl_endpoints() here. It is not |
| // thread-safe against the normal pvr2_send_request() mechanism. |
| // (We should make it thread safe). |
| |
| if (hdw->hdw_desc->flag_has_hauppauge_rom) { |
| ret = pvr2_hdw_get_eeprom_addr(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| if (ret < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Unable to determine location of eeprom," |
| " skipping"); |
| } else { |
| hdw->eeprom_addr = ret; |
| pvr2_eeprom_analyze(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| } |
| } else { |
| hdw->tuner_type = hdw->hdw_desc->default_tuner_type; |
| hdw->tuner_updated = !0; |
| hdw->std_mask_eeprom = V4L2_STD_ALL; |
| } |
| |
| if (hdw->serial_number) { |
| idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1, |
| "sn-%lu", hdw->serial_number); |
| } else if (hdw->unit_number >= 0) { |
| idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1, |
| "unit-%c", |
| hdw->unit_number + 'a'); |
| } else { |
| idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1, |
| "unit-??"); |
| } |
| hdw->identifier[idx] = 0; |
| |
| pvr2_hdw_setup_std(hdw); |
| |
| if (!get_default_tuner_type(hdw)) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup: Tuner type overridden to %d", |
| hdw->tuner_type); |
| } |
| |
| |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| if (hdw->hdw_desc->signal_routing_scheme == |
| PVR2_ROUTING_SCHEME_GOTVIEW) { |
| /* Ensure that GPIO 11 is set to output for GOTVIEW |
| hardware. */ |
| pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0); |
| } |
| |
| pvr2_hdw_commit_setup(hdw); |
| |
| hdw->vid_stream = pvr2_stream_create(); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup: video stream is %p",hdw->vid_stream); |
| if (hdw->vid_stream) { |
| idx = get_default_error_tolerance(hdw); |
| if (idx) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup: video stream %p" |
| " setting tolerance %u", |
| hdw->vid_stream,idx); |
| } |
| pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev, |
| PVR2_VID_ENDPOINT,idx); |
| } |
| |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| hdw->flag_init_ok = !0; |
| |
| pvr2_hdw_state_sched(hdw); |
| } |
| |
| |
| /* Set up the structure and attempt to put the device into a usable state. |
| This can be a time-consuming operation, which is why it is not done |
| internally as part of the create() step. */ |
| static void pvr2_hdw_setup(struct pvr2_hdw *hdw) |
| { |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw); |
| do { |
| pvr2_hdw_setup_low(hdw); |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d", |
| hdw,pvr2_hdw_dev_ok(hdw),hdw->flag_init_ok); |
| if (pvr2_hdw_dev_ok(hdw)) { |
| if (hdw->flag_init_ok) { |
| pvr2_trace( |
| PVR2_TRACE_INFO, |
| "Device initialization" |
| " completed successfully."); |
| break; |
| } |
| if (hdw->fw1_state == FW1_STATE_RELOAD) { |
| pvr2_trace( |
| PVR2_TRACE_INFO, |
| "Device microcontroller firmware" |
| " (re)loaded; it should now reset" |
| " and reconnect."); |
| break; |
| } |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Device initialization was not successful."); |
| if (hdw->fw1_state == FW1_STATE_MISSING) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Giving up since device" |
| " microcontroller firmware" |
| " appears to be missing."); |
| break; |
| } |
| } |
| if (hdw->flag_modulefail) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "***WARNING*** pvrusb2 driver initialization" |
| " failed due to the failure of one or more" |
| " sub-device kernel modules."); |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "You need to resolve the failing condition" |
| " before this driver can function. There" |
| " should be some earlier messages giving more" |
| " information about the problem."); |
| } |
| if (procreload) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempting pvrusb2 recovery by reloading" |
| " primary firmware."); |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "If this works, device should disconnect" |
| " and reconnect in a sane state."); |
| hdw->fw1_state = FW1_STATE_UNKNOWN; |
| pvr2_upload_firmware1(hdw); |
| } else { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "***WARNING*** pvrusb2 device hardware" |
| " appears to be jammed" |
| " and I can't clear it."); |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "You might need to power cycle" |
| " the pvrusb2 device" |
| " in order to recover."); |
| } |
| } while (0); |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw); |
| } |
| |
| |
| /* Perform second stage initialization. Set callback pointer first so that |
| we can avoid a possible initialization race (if the kernel thread runs |
| before the callback has been set). */ |
| int pvr2_hdw_initialize(struct pvr2_hdw *hdw, |
| void (*callback_func)(void *), |
| void *callback_data) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| if (hdw->flag_disconnected) { |
| /* Handle a race here: If we're already |
| disconnected by this point, then give up. If we |
| get past this then we'll remain connected for |
| the duration of initialization since the entire |
| initialization sequence is now protected by the |
| big_lock. */ |
| break; |
| } |
| hdw->state_data = callback_data; |
| hdw->state_func = callback_func; |
| pvr2_hdw_setup(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return hdw->flag_init_ok; |
| } |
| |
| |
| /* Create, set up, and return a structure for interacting with the |
| underlying hardware. */ |
| struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, |
| const struct usb_device_id *devid) |
| { |
| unsigned int idx,cnt1,cnt2,m; |
| struct pvr2_hdw *hdw = NULL; |
| int valid_std_mask; |
| struct pvr2_ctrl *cptr; |
| struct usb_device *usb_dev; |
| const struct pvr2_device_desc *hdw_desc; |
| __u8 ifnum; |
| struct v4l2_queryctrl qctrl; |
| struct pvr2_ctl_info *ciptr; |
| |
| usb_dev = interface_to_usbdev(intf); |
| |
| hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info); |
| |
| if (hdw_desc == NULL) { |
| pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:" |
| " No device description pointer," |
| " unable to continue."); |
| pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type," |
| " please contact Mike Isely <isely@pobox.com>" |
| " to get it included in the driver\n"); |
| goto fail; |
| } |
| |
| hdw = kzalloc(sizeof(*hdw),GFP_KERNEL); |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", |
| hdw,hdw_desc->description); |
| if (!hdw) goto fail; |
| |
| init_timer(&hdw->quiescent_timer); |
| hdw->quiescent_timer.data = (unsigned long)hdw; |
| hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout; |
| |
| init_timer(&hdw->encoder_wait_timer); |
| hdw->encoder_wait_timer.data = (unsigned long)hdw; |
| hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout; |
| |
| init_timer(&hdw->encoder_run_timer); |
| hdw->encoder_run_timer.data = (unsigned long)hdw; |
| hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout; |
| |
| hdw->master_state = PVR2_STATE_DEAD; |
| |
| init_waitqueue_head(&hdw->state_wait_data); |
| |
| hdw->tuner_signal_stale = !0; |
| cx2341x_fill_defaults(&hdw->enc_ctl_state); |
| |
| /* Calculate which inputs are OK */ |
| m = 0; |
| if (hdw_desc->flag_has_analogtuner) m |= 1 << PVR2_CVAL_INPUT_TV; |
| if (hdw_desc->digital_control_scheme != PVR2_DIGITAL_SCHEME_NONE) { |
| m |= 1 << PVR2_CVAL_INPUT_DTV; |
| } |
| if (hdw_desc->flag_has_svideo) m |= 1 << PVR2_CVAL_INPUT_SVIDEO; |
| if (hdw_desc->flag_has_composite) m |= 1 << PVR2_CVAL_INPUT_COMPOSITE; |
| if (hdw_desc->flag_has_fmradio) m |= 1 << PVR2_CVAL_INPUT_RADIO; |
| hdw->input_avail_mask = m; |
| hdw->input_allowed_mask = hdw->input_avail_mask; |
| |
| /* If not a hybrid device, pathway_state never changes. So |
| initialize it here to what it should forever be. */ |
| if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_DTV))) { |
| hdw->pathway_state = PVR2_PATHWAY_ANALOG; |
| } else if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_TV))) { |
| hdw->pathway_state = PVR2_PATHWAY_DIGITAL; |
| } |
| |
| hdw->control_cnt = CTRLDEF_COUNT; |
| hdw->control_cnt += MPEGDEF_COUNT; |
| hdw->controls = kzalloc(sizeof(struct pvr2_ctrl) * hdw->control_cnt, |
| GFP_KERNEL); |
| if (!hdw->controls) goto fail; |
| hdw->hdw_desc = hdw_desc; |
| hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme; |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| cptr->hdw = hdw; |
| } |
| for (idx = 0; idx < 32; idx++) { |
| hdw->std_mask_ptrs[idx] = hdw->std_mask_names[idx]; |
| } |
| for (idx = 0; idx < CTRLDEF_COUNT; idx++) { |
| cptr = hdw->controls + idx; |
| cptr->info = control_defs+idx; |
| } |
| |
| /* Ensure that default input choice is a valid one. */ |
| m = hdw->input_avail_mask; |
| if (m) for (idx = 0; idx < (sizeof(m) << 3); idx++) { |
| if (!((1 << idx) & m)) continue; |
| hdw->input_val = idx; |
| break; |
| } |
| |
| /* Define and configure additional controls from cx2341x module. */ |
| hdw->mpeg_ctrl_info = kzalloc( |
| sizeof(*(hdw->mpeg_ctrl_info)) * MPEGDEF_COUNT, GFP_KERNEL); |
| if (!hdw->mpeg_ctrl_info) goto fail; |
| for (idx = 0; idx < MPEGDEF_COUNT; idx++) { |
| cptr = hdw->controls + idx + CTRLDEF_COUNT; |
| ciptr = &(hdw->mpeg_ctrl_info[idx].info); |
| ciptr->desc = hdw->mpeg_ctrl_info[idx].desc; |
| ciptr->name = mpeg_ids[idx].strid; |
| ciptr->v4l_id = mpeg_ids[idx].id; |
| ciptr->skip_init = !0; |
| ciptr->get_value = ctrl_cx2341x_get; |
| ciptr->get_v4lflags = ctrl_cx2341x_getv4lflags; |
| ciptr->is_dirty = ctrl_cx2341x_is_dirty; |
| if (!idx) ciptr->clear_dirty = ctrl_cx2341x_clear_dirty; |
| qctrl.id = ciptr->v4l_id; |
| cx2341x_ctrl_query(&hdw->enc_ctl_state,&qctrl); |
| if (!(qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY)) { |
| ciptr->set_value = ctrl_cx2341x_set; |
| } |
| strncpy(hdw->mpeg_ctrl_info[idx].desc,qctrl.name, |
| PVR2_CTLD_INFO_DESC_SIZE); |
| hdw->mpeg_ctrl_info[idx].desc[PVR2_CTLD_INFO_DESC_SIZE-1] = 0; |
| ciptr->default_value = qctrl.default_value; |
| switch (qctrl.type) { |
| default: |
| case V4L2_CTRL_TYPE_INTEGER: |
| ciptr->type = pvr2_ctl_int; |
| ciptr->def.type_int.min_value = qctrl.minimum; |
| ciptr->def.type_int.max_value = qctrl.maximum; |
| break; |
| case V4L2_CTRL_TYPE_BOOLEAN: |
| ciptr->type = pvr2_ctl_bool; |
| break; |
| case V4L2_CTRL_TYPE_MENU: |
| ciptr->type = pvr2_ctl_enum; |
| ciptr->def.type_enum.value_names = |
| cx2341x_ctrl_get_menu(&hdw->enc_ctl_state, |
| ciptr->v4l_id); |
| for (cnt1 = 0; |
| ciptr->def.type_enum.value_names[cnt1] != NULL; |
| cnt1++) { } |
| ciptr->def.type_enum.count = cnt1; |
| break; |
| } |
| cptr->info = ciptr; |
| } |
| |
| // Initialize video standard enum dynamic control |
| cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDENUM); |
| if (cptr) { |
| memcpy(&hdw->std_info_enum,cptr->info, |
| sizeof(hdw->std_info_enum)); |
| cptr->info = &hdw->std_info_enum; |
| |
| } |
| // Initialize control data regarding video standard masks |
| valid_std_mask = pvr2_std_get_usable(); |
| for (idx = 0; idx < 32; idx++) { |
| if (!(valid_std_mask & (1 << idx))) continue; |
| cnt1 = pvr2_std_id_to_str( |
| hdw->std_mask_names[idx], |
| sizeof(hdw->std_mask_names[idx])-1, |
| 1 << idx); |
| hdw->std_mask_names[idx][cnt1] = 0; |
| } |
| cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDAVAIL); |
| if (cptr) { |
| memcpy(&hdw->std_info_avail,cptr->info, |
| sizeof(hdw->std_info_avail)); |
| cptr->info = &hdw->std_info_avail; |
| hdw->std_info_avail.def.type_bitmask.bit_names = |
| hdw->std_mask_ptrs; |
| hdw->std_info_avail.def.type_bitmask.valid_bits = |
| valid_std_mask; |
| } |
| cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDCUR); |
| if (cptr) { |
| memcpy(&hdw->std_info_cur,cptr->info, |
| sizeof(hdw->std_info_cur)); |
| cptr->info = &hdw->std_info_cur; |
| hdw->std_info_cur.def.type_bitmask.bit_names = |
| hdw->std_mask_ptrs; |
| hdw->std_info_avail.def.type_bitmask.valid_bits = |
| valid_std_mask; |
| } |
| |
| hdw->cropcap_stale = !0; |
| hdw->eeprom_addr = -1; |
| hdw->unit_number = -1; |
| hdw->v4l_minor_number_video = -1; |
| hdw->v4l_minor_number_vbi = -1; |
| hdw->v4l_minor_number_radio = -1; |
| hdw->ctl_write_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL); |
| if (!hdw->ctl_write_buffer) goto fail; |
| hdw->ctl_read_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL); |
| if (!hdw->ctl_read_buffer) goto fail; |
| hdw->ctl_write_urb = usb_alloc_urb(0,GFP_KERNEL); |
| if (!hdw->ctl_write_urb) goto fail; |
| hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL); |
| if (!hdw->ctl_read_urb) goto fail; |
| |
| if (v4l2_device_register(&intf->dev, &hdw->v4l2_dev) != 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Error registering with v4l core, giving up"); |
| goto fail; |
| } |
| mutex_lock(&pvr2_unit_mtx); do { |
| for (idx = 0; idx < PVR_NUM; idx++) { |
| if (unit_pointers[idx]) continue; |
| hdw->unit_number = idx; |
| unit_pointers[idx] = hdw; |
| break; |
| } |
| } while (0); mutex_unlock(&pvr2_unit_mtx); |
| |
| cnt1 = 0; |
| cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2"); |
| cnt1 += cnt2; |
| if (hdw->unit_number >= 0) { |
| cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"_%c", |
| ('a' + hdw->unit_number)); |
| cnt1 += cnt2; |
| } |
| if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1; |
| hdw->name[cnt1] = 0; |
| |
| hdw->workqueue = create_singlethread_workqueue(hdw->name); |
| INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll); |
| |
| pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s", |
| hdw->unit_number,hdw->name); |
| |
| hdw->tuner_type = -1; |
| hdw->flag_ok = !0; |
| |
| hdw->usb_intf = intf; |
| hdw->usb_dev = usb_dev; |
| |
| usb_make_path(hdw->usb_dev, hdw->bus_info, sizeof(hdw->bus_info)); |
| |
| ifnum = hdw->usb_intf->cur_altsetting->desc.bInterfaceNumber; |
| usb_set_interface(hdw->usb_dev,ifnum,0); |
| |
| mutex_init(&hdw->ctl_lock_mutex); |
| mutex_init(&hdw->big_lock_mutex); |
| |
| return hdw; |
| fail: |
| if (hdw) { |
| del_timer_sync(&hdw->quiescent_timer); |
| del_timer_sync(&hdw->encoder_run_timer); |
| del_timer_sync(&hdw->encoder_wait_timer); |
| if (hdw->workqueue) { |
| flush_workqueue(hdw->workqueue); |
| destroy_workqueue(hdw->workqueue); |
| hdw->workqueue = NULL; |
| } |
| usb_free_urb(hdw->ctl_read_urb); |
| usb_free_urb(hdw->ctl_write_urb); |
| kfree(hdw->ctl_read_buffer); |
| kfree(hdw->ctl_write_buffer); |
| kfree(hdw->controls); |
| kfree(hdw->mpeg_ctrl_info); |
| kfree(hdw->std_defs); |
| kfree(hdw->std_enum_names); |
| kfree(hdw); |
| } |
| return NULL; |
| } |
| |
| |
| /* Remove _all_ associations between this driver and the underlying USB |
| layer. */ |
| static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw) |
| { |
| if (hdw->flag_disconnected) return; |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_remove_usb_stuff: hdw=%p",hdw); |
| if (hdw->ctl_read_urb) { |
| usb_kill_urb(hdw->ctl_read_urb); |
| usb_free_urb(hdw->ctl_read_urb); |
| hdw->ctl_read_urb = NULL; |
| } |
| if (hdw->ctl_write_urb) { |
| usb_kill_urb(hdw->ctl_write_urb); |
| usb_free_urb(hdw->ctl_write_urb); |
| hdw->ctl_write_urb = NULL; |
| } |
| if (hdw->ctl_read_buffer) { |
| kfree(hdw->ctl_read_buffer); |
| hdw->ctl_read_buffer = NULL; |
| } |
| if (hdw->ctl_write_buffer) { |
| kfree(hdw->ctl_write_buffer); |
| hdw->ctl_write_buffer = NULL; |
| } |
| hdw->flag_disconnected = !0; |
| /* If we don't do this, then there will be a dangling struct device |
| reference to our disappearing device persisting inside the V4L |
| core... */ |
| v4l2_device_disconnect(&hdw->v4l2_dev); |
| hdw->usb_dev = NULL; |
| hdw->usb_intf = NULL; |
| pvr2_hdw_render_useless(hdw); |
| } |
| |
| |
| /* Destroy hardware interaction structure */ |
| void pvr2_hdw_destroy(struct pvr2_hdw *hdw) |
| { |
| if (!hdw) return; |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw); |
| if (hdw->workqueue) { |
| flush_workqueue(hdw->workqueue); |
| destroy_workqueue(hdw->workqueue); |
| hdw->workqueue = NULL; |
| } |
| del_timer_sync(&hdw->quiescent_timer); |
| del_timer_sync(&hdw->encoder_run_timer); |
| del_timer_sync(&hdw->encoder_wait_timer); |
| if (hdw->fw_buffer) { |
| kfree(hdw->fw_buffer); |
| hdw->fw_buffer = NULL; |
| } |
| if (hdw->vid_stream) { |
| pvr2_stream_destroy(hdw->vid_stream); |
| hdw->vid_stream = NULL; |
| } |
| pvr2_i2c_core_done(hdw); |
| v4l2_device_unregister(&hdw->v4l2_dev); |
| pvr2_hdw_remove_usb_stuff(hdw); |
| mutex_lock(&pvr2_unit_mtx); do { |
| if ((hdw->unit_number >= 0) && |
| (hdw->unit_number < PVR_NUM) && |
| (unit_pointers[hdw->unit_number] == hdw)) { |
| unit_pointers[hdw->unit_number] = NULL; |
| } |
| } while (0); mutex_unlock(&pvr2_unit_mtx); |
| kfree(hdw->controls); |
| kfree(hdw->mpeg_ctrl_info); |
| kfree(hdw->std_defs); |
| kfree(hdw->std_enum_names); |
| kfree(hdw); |
| } |
| |
| |
| int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw) |
| { |
| return (hdw && hdw->flag_ok); |
| } |
| |
| |
| /* Called when hardware has been unplugged */ |
| void pvr2_hdw_disconnect(struct pvr2_hdw *hdw) |
| { |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw); |
| LOCK_TAKE(hdw->big_lock); |
| LOCK_TAKE(hdw->ctl_lock); |
| pvr2_hdw_remove_usb_stuff(hdw); |
| LOCK_GIVE(hdw->ctl_lock); |
| LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| // Attempt to autoselect an appropriate value for std_enum_cur given |
| // whatever is currently in std_mask_cur |
| static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw) |
| { |
| unsigned int idx; |
| for (idx = 1; idx < hdw->std_enum_cnt; idx++) { |
| if (hdw->std_defs[idx-1].id == hdw->std_mask_cur) { |
| hdw->std_enum_cur = idx; |
| return; |
| } |
| } |
| hdw->std_enum_cur = 0; |
| } |
| |
| |
| // Calculate correct set of enumerated standards based on currently known |
| // set of available standards bits. |
| static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw) |
| { |
| struct v4l2_standard *newstd; |
| unsigned int std_cnt; |
| unsigned int idx; |
| |
| newstd = pvr2_std_create_enum(&std_cnt,hdw->std_mask_avail); |
| |
| if (hdw->std_defs) { |
| kfree(hdw->std_defs); |
| hdw->std_defs = NULL; |
| } |
| hdw->std_enum_cnt = 0; |
| if (hdw->std_enum_names) { |
| kfree(hdw->std_enum_names); |
| hdw->std_enum_names = NULL; |
| } |
| |
| if (!std_cnt) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "WARNING: Failed to identify any viable standards"); |
| } |
| hdw->std_enum_names = kmalloc(sizeof(char *)*(std_cnt+1),GFP_KERNEL); |
| hdw->std_enum_names[0] = "none"; |
| for (idx = 0; idx < std_cnt; idx++) { |
| hdw->std_enum_names[idx+1] = |
| newstd[idx].name; |
| } |
| // Set up the dynamic control for this standard |
| hdw->std_info_enum.def.type_enum.value_names = hdw->std_enum_names; |
| hdw->std_info_enum.def.type_enum.count = std_cnt+1; |
| hdw->std_defs = newstd; |
| hdw->std_enum_cnt = std_cnt+1; |
| hdw->std_enum_cur = 0; |
| hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail; |
| } |
| |
| |
| int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw, |
| struct v4l2_standard *std, |
| unsigned int idx) |
| { |
| int ret = -EINVAL; |
| if (!idx) return ret; |
| LOCK_TAKE(hdw->big_lock); do { |
| if (idx >= hdw->std_enum_cnt) break; |
| idx--; |
| memcpy(std,hdw->std_defs+idx,sizeof(*std)); |
| ret = 0; |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return ret; |
| } |
| |
| |
| /* Get the number of defined controls */ |
| unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *hdw) |
| { |
| return hdw->control_cnt; |
| } |
| |
| |
| /* Retrieve a control handle given its index (0..count-1) */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *hdw, |
| unsigned int idx) |
| { |
| if (idx >= hdw->control_cnt) return NULL; |
| return hdw->controls + idx; |
| } |
| |
| |
| /* Retrieve a control handle given its index (0..count-1) */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *hdw, |
| unsigned int ctl_id) |
| { |
| struct pvr2_ctrl *cptr; |
| unsigned int idx; |
| int i; |
| |
| /* This could be made a lot more efficient, but for now... */ |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| i = cptr->info->internal_id; |
| if (i && (i == ctl_id)) return cptr; |
| } |
| return NULL; |
| } |
| |
| |
| /* Given a V4L ID, retrieve the control structure associated with it. */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *hdw,unsigned int ctl_id) |
| { |
| struct pvr2_ctrl *cptr; |
| unsigned int idx; |
| int i; |
| |
| /* This could be made a lot more efficient, but for now... */ |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| i = cptr->info->v4l_id; |
| if (i && (i == ctl_id)) return cptr; |
| } |
| return NULL; |
| } |
| |
| |
| /* Given a V4L ID for its immediate predecessor, retrieve the control |
| structure associated with it. */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *hdw, |
| unsigned int ctl_id) |
| { |
| struct pvr2_ctrl *cptr,*cp2; |
| unsigned int idx; |
| int i; |
| |
| /* This could be made a lot more efficient, but for now... */ |
| cp2 = NULL; |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| i = cptr->info->v4l_id; |
| if (!i) continue; |
| if (i <= ctl_id) continue; |
| if (cp2 && (cp2->info->v4l_id < i)) continue; |
| cp2 = cptr; |
| } |
| return cp2; |
| return NULL; |
| } |
| |
| |
| static const char *get_ctrl_typename(enum pvr2_ctl_type tp) |
| { |
| switch (tp) { |
| case pvr2_ctl_int: return "integer"; |
| case pvr2_ctl_enum: return "enum"; |
| case pvr2_ctl_bool: return "boolean"; |
| case pvr2_ctl_bitmask: return "bitmask"; |
| } |
| return ""; |
| } |
| |
| |
| static void pvr2_subdev_set_control(struct pvr2_hdw *hdw, int id, |
| const char *name, int val) |
| { |
| struct v4l2_control ctrl; |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 %s=%d", name, val); |
| memset(&ctrl, 0, sizeof(ctrl)); |
| ctrl.id = id; |
| ctrl.value = val; |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_ctrl, &ctrl); |
| } |
| |
| #define PVR2_SUBDEV_SET_CONTROL(hdw, id, lab) \ |
| if ((hdw)->lab##_dirty || (hdw)->force_dirty) { \ |
| pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \ |
| } |
| |
| /* Execute whatever commands are required to update the state of all the |
| sub-devices so that they match our current control values. */ |
| static void pvr2_subdev_update(struct pvr2_hdw *hdw) |
| { |
| struct v4l2_subdev *sd; |
| unsigned int id; |
| pvr2_subdev_update_func fp; |
| |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev update..."); |
| |
| if (hdw->tuner_updated || hdw->force_dirty) { |
| struct tuner_setup setup; |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev tuner set_type(%d)", |
| hdw->tuner_type); |
| if (((int)(hdw->tuner_type)) >= 0) { |
| memset(&setup, 0, sizeof(setup)); |
| setup.addr = ADDR_UNSET; |
| setup.type = hdw->tuner_type; |
| setup.mode_mask = T_RADIO | T_ANALOG_TV; |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, |
| tuner, s_type_addr, &setup); |
| } |
| } |
| |
| if (hdw->input_dirty || hdw->std_dirty || hdw->force_dirty) { |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_standard"); |
| if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, |
| tuner, s_radio); |
| } else { |
| v4l2_std_id vs; |
| vs = hdw->std_mask_cur; |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, |
| core, s_std, vs); |
| pvr2_hdw_cx25840_vbi_hack(hdw); |
| } |
| hdw->tuner_signal_stale = !0; |
| hdw->cropcap_stale = !0; |
| } |
| |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_BRIGHTNESS, brightness); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_CONTRAST, contrast); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_SATURATION, saturation); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_HUE, hue); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_MUTE, mute); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_VOLUME, volume); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BALANCE, balance); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BASS, bass); |
| PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_TREBLE, treble); |
| |
| if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) { |
| struct v4l2_tuner vt; |
| memset(&vt, 0, sizeof(vt)); |
| vt.audmode = hdw->audiomode_val; |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt); |
| } |
| |
| if (hdw->freqDirty || hdw->force_dirty) { |
| unsigned long fv; |
| struct v4l2_frequency freq; |
| fv = pvr2_hdw_get_cur_freq(hdw); |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_freq(%lu)", fv); |
| if (hdw->tuner_signal_stale) pvr2_hdw_status_poll(hdw); |
| memset(&freq, 0, sizeof(freq)); |
| if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) { |
| /* ((fv * 1000) / 62500) */ |
| freq.frequency = (fv * 2) / 125; |
| } else { |
| freq.frequency = fv / 62500; |
| } |
| /* tuner-core currently doesn't seem to care about this, but |
| let's set it anyway for completeness. */ |
| if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| freq.type = V4L2_TUNER_RADIO; |
| } else { |
| freq.type = V4L2_TUNER_ANALOG_TV; |
| } |
| freq.tuner = 0; |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, |
| s_frequency, &freq); |
| } |
| |
| if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) { |
| struct v4l2_format fmt; |
| memset(&fmt, 0, sizeof(fmt)); |
| fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| fmt.fmt.pix.width = hdw->res_hor_val; |
| fmt.fmt.pix.height = hdw->res_ver_val; |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)", |
| fmt.fmt.pix.width, fmt.fmt.pix.height); |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_fmt, &fmt); |
| } |
| |
| if (hdw->srate_dirty || hdw->force_dirty) { |
| u32 val; |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_audio %d", |
| hdw->srate_val); |
| switch (hdw->srate_val) { |
| default: |
| case V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000: |
| val = 48000; |
| break; |
| case V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100: |
| val = 44100; |
| break; |
| case V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000: |
| val = 32000; |
| break; |
| } |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, |
| audio, s_clock_freq, val); |
| } |
| |
| /* Unable to set crop parameters; there is apparently no equivalent |
| for VIDIOC_S_CROP */ |
| |
| v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) { |
| id = sd->grp_id; |
| if (id >= ARRAY_SIZE(pvr2_module_update_functions)) continue; |
| fp = pvr2_module_update_functions[id]; |
| if (!fp) continue; |
| (*fp)(hdw, sd); |
| } |
| |
| if (hdw->tuner_signal_stale || hdw->cropcap_stale) { |
| pvr2_hdw_status_poll(hdw); |
| } |
| } |
| |
| |
| /* Figure out if we need to commit control changes. If so, mark internal |
| state flags to indicate this fact and return true. Otherwise do nothing |
| else and return false. */ |
| static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw) |
| { |
| unsigned int idx; |
| struct pvr2_ctrl *cptr; |
| int value; |
| int commit_flag = hdw->force_dirty; |
| char buf[100]; |
| unsigned int bcnt,ccnt; |
| |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| if (!cptr->info->is_dirty) continue; |
| if (!cptr->info->is_dirty(cptr)) continue; |
| commit_flag = !0; |
| |
| if (!(pvrusb2_debug & PVR2_TRACE_CTL)) continue; |
| bcnt = scnprintf(buf,sizeof(buf),"\"%s\" <-- ", |
| cptr->info->name); |
| value = 0; |
| cptr->info->get_value(cptr,&value); |
| pvr2_ctrl_value_to_sym_internal(cptr,~0,value, |
| buf+bcnt, |
| sizeof(buf)-bcnt,&ccnt); |
| bcnt += ccnt; |
| bcnt += scnprintf(buf+bcnt,sizeof(buf)-bcnt," <%s>", |
| get_ctrl_typename(cptr->info->type)); |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*--TRACE_COMMIT--*/ %.*s", |
| bcnt,buf); |
| } |
| |
| if (!commit_flag) { |
| /* Nothing has changed */ |
| return 0; |
| } |
| |
| hdw->state_pipeline_config = 0; |
| trace_stbit("state_pipeline_config",hdw->state_pipeline_config); |
| pvr2_hdw_state_sched(hdw); |
| |
| return !0; |
| } |
| |
| |
| /* Perform all operations needed to commit all control changes. This must |
| be performed in synchronization with the pipeline state and is thus |
| expected to be called as part of the driver's worker thread. Return |
| true if commit successful, otherwise return false to indicate that |
| commit isn't possible at this time. */ |
| static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) |
| { |
| unsigned int idx; |
| struct pvr2_ctrl *cptr; |
| int disruptive_change; |
| |
| /* Handle some required side effects when the video standard is |
| changed.... */ |
| if (hdw->std_dirty) { |
| int nvres; |
| int gop_size; |
| if (hdw->std_mask_cur & V4L2_STD_525_60) { |
| nvres = 480; |
| gop_size = 15; |
| } else { |
| nvres = 576; |
| gop_size = 12; |
| } |
| /* Rewrite the vertical resolution to be appropriate to the |
| video standard that has been selected. */ |
| if (nvres != hdw->res_ver_val) { |
| hdw->res_ver_val = nvres; |
| hdw->res_ver_dirty = !0; |
| } |
| /* Rewrite the GOP size to be appropriate to the video |
| standard that has been selected. */ |
| if (gop_size != hdw->enc_ctl_state.video_gop_size) { |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs, 0, sizeof(cs)); |
| memset(&c1, 0, sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE; |
| c1.value = gop_size; |
| cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs, |
| VIDIOC_S_EXT_CTRLS); |
| } |
| } |
| |
| if (hdw->input_dirty && hdw->state_pathway_ok && |
| (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ? |
| PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) != |
| hdw->pathway_state)) { |
| /* Change of mode being asked for... */ |
| hdw->state_pathway_ok = 0; |
| trace_stbit("state_pathway_ok",hdw->state_pathway_ok); |
| } |
| if (!hdw->state_pathway_ok) { |
| /* Can't commit anything until pathway is ok. */ |
| return 0; |
| } |
| /* The broadcast decoder can only scale down, so if |
| * res_*_dirty && crop window < output format ==> enlarge crop. |
| * |
| * The mpeg encoder receives fields of res_hor_val dots and |
| * res_ver_val halflines. Limits: hor<=720, ver<=576. |
| */ |
| if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) { |
| hdw->cropw_val = hdw->res_hor_val; |
| hdw->cropw_dirty = !0; |
| } else if (hdw->cropw_dirty) { |
| hdw->res_hor_dirty = !0; /* must rescale */ |
| hdw->res_hor_val = min(720, hdw->cropw_val); |
| } |
| if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) { |
| hdw->croph_val = hdw->res_ver_val; |
| hdw->croph_dirty = !0; |
| } else if (hdw->croph_dirty) { |
| int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576; |
| hdw->res_ver_dirty = !0; |
| hdw->res_ver_val = min(nvres, hdw->croph_val); |
| } |
| |
| /* If any of the below has changed, then we can't do the update |
| while the pipeline is running. Pipeline must be paused first |
| and decoder -> encoder connection be made quiescent before we |
| can proceed. */ |
| disruptive_change = |
| (hdw->std_dirty || |
| hdw->enc_unsafe_stale || |
| hdw->srate_dirty || |
| hdw->res_ver_dirty || |
| hdw->res_hor_dirty || |
| hdw->cropw_dirty || |
| hdw->croph_dirty || |
| hdw->input_dirty || |
| (hdw->active_stream_type != hdw->desired_stream_type)); |
| if (disruptive_change && !hdw->state_pipeline_idle) { |
| /* Pipeline is not idle; we can't proceed. Arrange to |
| cause pipeline to stop so that we can try this again |
| later.... */ |
| hdw->state_pipeline_pause = !0; |
| return 0; |
| } |
| |
| if (hdw->srate_dirty) { |
| /* Write new sample rate into control structure since |
| * the master copy is stale. We must track srate |
| * separate from the mpeg control structure because |
| * other logic also uses this value. */ |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs,0,sizeof(cs)); |
| memset(&c1,0,sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ; |
| c1.value = hdw->srate_val; |
| cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,VIDIOC_S_EXT_CTRLS); |
| } |
| |
| if (hdw->active_stream_type != hdw->desired_stream_type) { |
| /* Handle any side effects of stream config here */ |
| hdw->active_stream_type = hdw->desired_stream_type; |
| } |
| |
| if (hdw->hdw_desc->signal_routing_scheme == |
| PVR2_ROUTING_SCHEME_GOTVIEW) { |
| u32 b; |
| /* Handle GOTVIEW audio switching */ |
| pvr2_hdw_gpio_get_out(hdw,&b); |
| if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| /* Set GPIO 11 */ |
| pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0); |
| } else { |
| /* Clear GPIO 11 */ |
| pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0); |
| } |
| } |
| |
| /* Check and update state for all sub-devices. */ |
| pvr2_subdev_update(hdw); |
| |
| hdw->tuner_updated = 0; |
| hdw->force_dirty = 0; |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| if (!cptr->info->clear_dirty) continue; |
| cptr->info->clear_dirty(cptr); |
| } |
| |
| if ((hdw->pathway_state == PVR2_PATHWAY_ANALOG) && |
| hdw->state_encoder_run) { |
| /* If encoder isn't running or it can't be touched, then |
| this will get worked out later when we start the |
| encoder. */ |
| if (pvr2_encoder_adjust(hdw) < 0) return !0; |
| } |
| |
| hdw->state_pipeline_config = !0; |
| /* Hardware state may have changed in a way to cause the cropping |
| capabilities to have changed. So mark it stale, which will |
| cause a later re-fetch. */ |
| trace_stbit("state_pipeline_config",hdw->state_pipeline_config); |
| return !0; |
| } |
| |
| |
| int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw) |
| { |
| int fl; |
| LOCK_TAKE(hdw->big_lock); |
| fl = pvr2_hdw_commit_setup(hdw); |
| LOCK_GIVE(hdw->big_lock); |
| if (!fl) return 0; |
| return pvr2_hdw_wait(hdw,0); |
| } |
| |
| |
| static void pvr2_hdw_worker_poll(struct work_struct *work) |
| { |
| int fl = 0; |
| struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workpoll); |
| LOCK_TAKE(hdw->big_lock); do { |
| fl = pvr2_hdw_state_eval(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| if (fl && hdw->state_func) { |
| hdw->state_func(hdw->state_data); |
| } |
| } |
| |
| |
| static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state) |
| { |
| return wait_event_interruptible( |
| hdw->state_wait_data, |
| (hdw->state_stale == 0) && |
| (!state || (hdw->master_state != state))); |
| } |
| |
| |
| /* Return name for this driver instance */ |
| const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) |
| { |
| return hdw->name; |
| } |
| |
| |
| const char *pvr2_hdw_get_desc(struct pvr2_hdw *hdw) |
| { |
| return hdw->hdw_desc->description; |
| } |
| |
| |
| const char *pvr2_hdw_get_type(struct pvr2_hdw *hdw) |
| { |
| return hdw->hdw_desc->shortname; |
| } |
| |
| |
| int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw) |
| { |
| int result; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED; |
| result = pvr2_send_request(hdw, |
| hdw->cmd_buffer,1, |
| hdw->cmd_buffer,1); |
| if (result < 0) break; |
| result = (hdw->cmd_buffer[0] != 0); |
| } while(0); LOCK_GIVE(hdw->ctl_lock); |
| return result; |
| } |
| |
| |
| /* Execute poll of tuner status */ |
| void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_hdw_status_poll(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->cropcap_stale) { |
| return 0; |
| } |
| pvr2_hdw_status_poll(hdw); |
| if (hdw->cropcap_stale) { |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| |
| /* Return information about cropping capabilities */ |
| int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp) |
| { |
| int stat = 0; |
| LOCK_TAKE(hdw->big_lock); |
| stat = pvr2_hdw_check_cropcap(hdw); |
| if (!stat) { |
| memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info)); |
| } |
| LOCK_GIVE(hdw->big_lock); |
| return stat; |
| } |
| |
| |
| /* Return information about the tuner */ |
| int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| if (hdw->tuner_signal_stale) { |
| pvr2_hdw_status_poll(hdw); |
| } |
| memcpy(vtp,&hdw->tuner_signal_info,sizeof(struct v4l2_tuner)); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return 0; |
| } |
| |
| |
| /* Get handle to video output stream */ |
| struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *hp) |
| { |
| return hp->vid_stream; |
| } |
| |
| |
| void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw) |
| { |
| int nr = pvr2_hdw_get_unit_number(hdw); |
| LOCK_TAKE(hdw->big_lock); do { |
| printk(KERN_INFO "pvrusb2: ================= START STATUS CARD #%d =================\n", nr); |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, core, log_status); |
| pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:"); |
| cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2"); |
| pvr2_hdw_state_log_state(hdw); |
| printk(KERN_INFO "pvrusb2: ================== END STATUS CARD #%d ==================\n", nr); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| /* Grab EEPROM contents, needed for direct method. */ |
| #define EEPROM_SIZE 8192 |
| #define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__) |
| static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw) |
| { |
| struct i2c_msg msg[2]; |
| u8 *eeprom; |
| u8 iadd[2]; |
| u8 addr; |
| u16 eepromSize; |
| unsigned int offs; |
| int ret; |
| int mode16 = 0; |
| unsigned pcnt,tcnt; |
| eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL); |
| if (!eeprom) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to allocate memory" |
| " required to read eeprom"); |
| return NULL; |
| } |
| |
| trace_eeprom("Value for eeprom addr from controller was 0x%x", |
| hdw->eeprom_addr); |
| addr = hdw->eeprom_addr; |
| /* Seems that if the high bit is set, then the *real* eeprom |
| address is shifted right now bit position (noticed this in |
| newer PVR USB2 hardware) */ |
| if (addr & 0x80) addr >>= 1; |
| |
| /* FX2 documentation states that a 16bit-addressed eeprom is |
| expected if the I2C address is an odd number (yeah, this is |
| strange but it's what they do) */ |
| mode16 = (addr & 1); |
| eepromSize = (mode16 ? EEPROM_SIZE : 256); |
| trace_eeprom("Examining %d byte eeprom at location 0x%x" |
| " using %d bit addressing",eepromSize,addr, |
| mode16 ? 16 : 8); |
| |
| msg[0].addr = addr; |
| msg[0].flags = 0; |
| msg[0].len = mode16 ? 2 : 1; |
| msg[0].buf = iadd; |
| msg[1].addr = addr; |
| msg[1].flags = I2C_M_RD; |
| |
| /* We have to do the actual eeprom data fetch ourselves, because |
| (1) we're only fetching part of the eeprom, and (2) if we were |
| getting the whole thing our I2C driver can't grab it in one |
| pass - which is what tveeprom is otherwise going to attempt */ |
| memset(eeprom,0,EEPROM_SIZE); |
| for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) { |
| pcnt = 16; |
| if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt; |
| offs = tcnt + (eepromSize - EEPROM_SIZE); |
| if (mode16) { |
| iadd[0] = offs >> 8; |
| iadd[1] = offs; |
| } else { |
| iadd[0] = offs; |
| } |
| msg[1].len = pcnt; |
| msg[1].buf = eeprom+tcnt; |
| if ((ret = i2c_transfer(&hdw->i2c_adap, |
| msg,ARRAY_SIZE(msg))) != 2) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "eeprom fetch set offs err=%d",ret); |
| kfree(eeprom); |
| return NULL; |
| } |
| } |
| return eeprom; |
| } |
| |
| |
| void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, |
| int prom_flag, |
| int enable_flag) |
| { |
| int ret; |
| u16 address; |
| unsigned int pipe; |
| LOCK_TAKE(hdw->big_lock); do { |
| if ((hdw->fw_buffer == NULL) == !enable_flag) break; |
| |
| if (!enable_flag) { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Cleaning up after CPU firmware fetch"); |
| kfree(hdw->fw_buffer); |
| hdw->fw_buffer = NULL; |
| hdw->fw_size = 0; |
| if (hdw->fw_cpu_flag) { |
| /* Now release the CPU. It will disconnect |
| and reconnect later. */ |
| pvr2_hdw_cpureset_assert(hdw,0); |
| } |
| break; |
| } |
| |
| hdw->fw_cpu_flag = (prom_flag == 0); |
| if (hdw->fw_cpu_flag) { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Preparing to suck out CPU firmware"); |
| hdw->fw_size = 0x2000; |
| hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL); |
| if (!hdw->fw_buffer) { |
| hdw->fw_size = 0; |
| break; |
| } |
| |
| /* We have to hold the CPU during firmware upload. */ |
| pvr2_hdw_cpureset_assert(hdw,1); |
| |
| /* download the firmware from address 0000-1fff in 2048 |
| (=0x800) bytes chunk. */ |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Grabbing CPU firmware"); |
| pipe = usb_rcvctrlpipe(hdw->usb_dev, 0); |
| for(address = 0; address < hdw->fw_size; |
| address += 0x800) { |
| ret = usb_control_msg(hdw->usb_dev,pipe, |
| 0xa0,0xc0, |
| address,0, |
| hdw->fw_buffer+address, |
| 0x800,HZ); |
| if (ret < 0) break; |
| } |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Done grabbing CPU firmware"); |
| } else { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Sucking down EEPROM contents"); |
| hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw); |
| if (!hdw->fw_buffer) { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "EEPROM content suck failed."); |
| break; |
| } |
| hdw->fw_size = EEPROM_SIZE; |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Done sucking down EEPROM contents"); |
| } |
| |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| /* Return true if we're in a mode for retrieval CPU firmware */ |
| int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw) |
| { |
| return hdw->fw_buffer != NULL; |
| } |
| |
| |
| int pvr2_hdw_cpufw_get(struct pvr2_hdw *hdw,unsigned int offs, |
| char *buf,unsigned int cnt) |
| { |
| int ret = -EINVAL; |
| LOCK_TAKE(hdw->big_lock); do { |
| if (!buf) break; |
| if (!cnt) break; |
| |
| if (!hdw->fw_buffer) { |
| ret = -EIO; |
| break; |
| } |
| |
| if (offs >= hdw->fw_size) { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Read firmware data offs=%d EOF", |
| offs); |
| ret = 0; |
| break; |
| } |
| |
| if (offs + cnt > hdw->fw_size) cnt = hdw->fw_size - offs; |
| |
| memcpy(buf,hdw->fw_buffer+offs,cnt); |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Read firmware data offs=%d cnt=%d", |
| offs,cnt); |
| ret = cnt; |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| |
| return ret; |
| } |
| |
| |
| int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *hdw, |
| enum pvr2_v4l_type index) |
| { |
| switch (index) { |
| case pvr2_v4l_type_video: return hdw->v4l_minor_number_video; |
| case pvr2_v4l_type_vbi: return hdw->v4l_minor_number_vbi; |
| case pvr2_v4l_type_radio: return hdw->v4l_minor_number_radio; |
| default: return -1; |
| } |
| } |
| |
| |
| /* Store a v4l minor device number */ |
| void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *hdw, |
| enum pvr2_v4l_type index,int v) |
| { |
| switch (index) { |
| case pvr2_v4l_type_video: hdw->v4l_minor_number_video = v; |
| case pvr2_v4l_type_vbi: hdw->v4l_minor_number_vbi = v; |
| case pvr2_v4l_type_radio: hdw->v4l_minor_number_radio = v; |
| default: break; |
| } |
| } |
| |
| |
| static void pvr2_ctl_write_complete(struct urb *urb) |
| { |
| struct pvr2_hdw *hdw = urb->context; |
| hdw->ctl_write_pend_flag = 0; |
| if (hdw->ctl_read_pend_flag) return; |
| complete(&hdw->ctl_done); |
| } |
| |
| |
| static void pvr2_ctl_read_complete(struct urb *urb) |
| { |
| struct pvr2_hdw *hdw = urb->context; |
| hdw->ctl_read_pend_flag = 0; |
| if (hdw->ctl_write_pend_flag) return; |
| complete(&hdw->ctl_done); |
| } |
| |
| |
| static void pvr2_ctl_timeout(unsigned long data) |
| { |
| struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; |
| if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { |
| hdw->ctl_timeout_flag = !0; |
| if (hdw->ctl_write_pend_flag) |
| usb_unlink_urb(hdw->ctl_write_urb); |
| if (hdw->ctl_read_pend_flag) |
| usb_unlink_urb(hdw->ctl_read_urb); |
| } |
| } |
| |
| |
| /* Issue a command and get a response from the device. This extended |
| version includes a probe flag (which if set means that device errors |
| should not be logged or treated as fatal) and a timeout in jiffies. |
| This can be used to non-lethally probe the health of endpoint 1. */ |
| static int pvr2_send_request_ex(struct pvr2_hdw *hdw, |
| unsigned int timeout,int probe_fl, |
| void *write_data,unsigned int write_len, |
| void *read_data,unsigned int read_len) |
| { |
| unsigned int idx; |
| int status = 0; |
| struct timer_list timer; |
| if (!hdw->ctl_lock_held) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute control transfer" |
| " without lock!!"); |
| return -EDEADLK; |
| } |
| if (!hdw->flag_ok && !probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute control transfer" |
| " when device not ok"); |
| return -EIO; |
| } |
| if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) { |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute control transfer" |
| " when USB is disconnected"); |
| } |
| return -ENOTTY; |
| } |
| |
| /* Ensure that we have sane parameters */ |
| if (!write_data) write_len = 0; |
| if (!read_data) read_len = 0; |
| if (write_len > PVR2_CTL_BUFFSIZE) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute %d byte" |
| " control-write transfer (limit=%d)", |
| write_len,PVR2_CTL_BUFFSIZE); |
| return -EINVAL; |
| } |
| if (read_len > PVR2_CTL_BUFFSIZE) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute %d byte" |
| " control-read transfer (limit=%d)", |
| write_len,PVR2_CTL_BUFFSIZE); |
| return -EINVAL; |
| } |
| if ((!write_len) && (!read_len)) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute null control transfer?"); |
| return -EINVAL; |
| } |
| |
| |
| hdw->cmd_debug_state = 1; |
| if (write_len) { |
| hdw->cmd_debug_code = ((unsigned char *)write_data)[0]; |
| } else { |
| hdw->cmd_debug_code = 0; |
| } |
| hdw->cmd_debug_write_len = write_len; |
| hdw->cmd_debug_read_len = read_len; |
| |
| /* Initialize common stuff */ |
| init_completion(&hdw->ctl_done); |
| hdw->ctl_timeout_flag = 0; |
| hdw->ctl_write_pend_flag = 0; |
| hdw->ctl_read_pend_flag = 0; |
| init_timer(&timer); |
| timer.expires = jiffies + timeout; |
| timer.data = (unsigned long)hdw; |
| timer.function = pvr2_ctl_timeout; |
| |
| if (write_len) { |
| hdw->cmd_debug_state = 2; |
| /* Transfer write data to internal buffer */ |
| for (idx = 0; idx < write_len; idx++) { |
| hdw->ctl_write_buffer[idx] = |
| ((unsigned char *)write_data)[idx]; |
| } |
| /* Initiate a write request */ |
| usb_fill_bulk_urb(hdw->ctl_write_urb, |
| hdw->usb_dev, |
| usb_sndbulkpipe(hdw->usb_dev, |
| PVR2_CTL_WRITE_ENDPOINT), |
| hdw->ctl_write_buffer, |
| write_len, |
| pvr2_ctl_write_complete, |
| hdw); |
| hdw->ctl_write_urb->actual_length = 0; |
| hdw->ctl_write_pend_flag = !0; |
| status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL); |
| if (status < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to submit write-control" |
| " URB status=%d",status); |
| hdw->ctl_write_pend_flag = 0; |
| goto done; |
| } |
| } |
| |
| if (read_len) { |
| hdw->cmd_debug_state = 3; |
| memset(hdw->ctl_read_buffer,0x43,read_len); |
| /* Initiate a read request */ |
| usb_fill_bulk_urb(hdw->ctl_read_urb, |
| hdw->usb_dev, |
| usb_rcvbulkpipe(hdw->usb_dev, |
| PVR2_CTL_READ_ENDPOINT), |
| hdw->ctl_read_buffer, |
| read_len, |
| pvr2_ctl_read_complete, |
| hdw); |
| hdw->ctl_read_urb->actual_length = 0; |
| hdw->ctl_read_pend_flag = !0; |
| status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL); |
| if (status < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to submit read-control" |
| " URB status=%d",status); |
| hdw->ctl_read_pend_flag = 0; |
| goto done; |
| } |
| } |
| |
| /* Start timer */ |
| add_timer(&timer); |
| |
| /* Now wait for all I/O to complete */ |
| hdw->cmd_debug_state = 4; |
| while (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { |
| wait_for_completion(&hdw->ctl_done); |
| } |
| hdw->cmd_debug_state = 5; |
| |
| /* Stop timer */ |
| del_timer_sync(&timer); |
| |
| hdw->cmd_debug_state = 6; |
| status = 0; |
| |
| if (hdw->ctl_timeout_flag) { |
| status = -ETIMEDOUT; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Timed out control-write"); |
| } |
| goto done; |
| } |
| |
| if (write_len) { |
| /* Validate results of write request */ |
| if ((hdw->ctl_write_urb->status != 0) && |
| (hdw->ctl_write_urb->status != -ENOENT) && |
| (hdw->ctl_write_urb->status != -ESHUTDOWN) && |
| (hdw->ctl_write_urb->status != -ECONNRESET)) { |
| /* USB subsystem is reporting some kind of failure |
| on the write */ |
| status = hdw->ctl_write_urb->status; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-write URB failure," |
| " status=%d", |
| status); |
| } |
| goto done; |
| } |
| if (hdw->ctl_write_urb->actual_length < write_len) { |
| /* Failed to write enough data */ |
| status = -EIO; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-write URB short," |
| " expected=%d got=%d", |
| write_len, |
| hdw->ctl_write_urb->actual_length); |
| } |
| goto done; |
| } |
| } |
| if (read_len) { |
| /* Validate results of read request */ |
| if ((hdw->ctl_read_urb->status != 0) && |
| (hdw->ctl_read_urb->status != -ENOENT) && |
| (hdw->ctl_read_urb->status != -ESHUTDOWN) && |
| (hdw->ctl_read_urb->status != -ECONNRESET)) { |
| /* USB subsystem is reporting some kind of failure |
| on the read */ |
| status = hdw->ctl_read_urb->status; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-read URB failure," |
| " status=%d", |
| status); |
| } |
| goto done; |
| } |
| if (hdw->ctl_read_urb->actual_length < read_len) { |
| /* Failed to read enough data */ |
| status = -EIO; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-read URB short," |
| " expected=%d got=%d", |
| read_len, |
| hdw->ctl_read_urb->actual_length); |
| } |
| goto done; |
| } |
| /* Transfer retrieved data out from internal buffer */ |
| for (idx = 0; idx < read_len; idx++) { |
| ((unsigned char *)read_data)[idx] = |
| hdw->ctl_read_buffer[idx]; |
| } |
| } |
| |
| done: |
| |
| hdw->cmd_debug_state = 0; |
| if ((status < 0) && (!probe_fl)) { |
| pvr2_hdw_render_useless(hdw); |
| } |
| return status; |
| } |
| |
| |
| int pvr2_send_request(struct pvr2_hdw *hdw, |
| void *write_data,unsigned int write_len, |
| void *read_data,unsigned int read_len) |
| { |
| return pvr2_send_request_ex(hdw,HZ*4,0, |
| write_data,write_len, |
| read_data,read_len); |
| } |
| |
| |
| static int pvr2_issue_simple_cmd(struct pvr2_hdw *hdw,u32 cmdcode) |
| { |
| int ret; |
| unsigned int cnt = 1; |
| unsigned int args = 0; |
| LOCK_TAKE(hdw->ctl_lock); |
| hdw->cmd_buffer[0] = cmdcode & 0xffu; |
| args = (cmdcode >> 8) & 0xffu; |
| args = (args > 2) ? 2 : args; |
| if (args) { |
| cnt += args; |
| hdw->cmd_buffer[1] = (cmdcode >> 16) & 0xffu; |
| if (args > 1) { |
| hdw->cmd_buffer[2] = (cmdcode >> 24) & 0xffu; |
| } |
| } |
| if (pvrusb2_debug & PVR2_TRACE_INIT) { |
| unsigned int idx; |
| unsigned int ccnt,bcnt; |
| char tbuf[50]; |
| cmdcode &= 0xffu; |
| bcnt = 0; |
| ccnt = scnprintf(tbuf+bcnt, |
| sizeof(tbuf)-bcnt, |
| "Sending FX2 command 0x%x",cmdcode); |
| bcnt += ccnt; |
| for (idx = 0; idx < ARRAY_SIZE(pvr2_fx2cmd_desc); idx++) { |
| if (pvr2_fx2cmd_desc[idx].id == cmdcode) { |
| ccnt = scnprintf(tbuf+bcnt, |
| sizeof(tbuf)-bcnt, |
| " \"%s\"", |
| pvr2_fx2cmd_desc[idx].desc); |
| bcnt += ccnt; |
| break; |
| } |
| } |
| if (args) { |
| ccnt = scnprintf(tbuf+bcnt, |
| sizeof(tbuf)-bcnt, |
| " (%u",hdw->cmd_buffer[1]); |
| bcnt += ccnt; |
| if (args > 1) { |
| ccnt = scnprintf(tbuf+bcnt, |
| sizeof(tbuf)-bcnt, |
| ",%u",hdw->cmd_buffer[2]); |
| bcnt += ccnt; |
| } |
| ccnt = scnprintf(tbuf+bcnt, |
| sizeof(tbuf)-bcnt, |
| ")"); |
| bcnt += ccnt; |
| } |
| pvr2_trace(PVR2_TRACE_INIT,"%.*s",bcnt,tbuf); |
| } |
| ret = pvr2_send_request(hdw,hdw->cmd_buffer,cnt,NULL,0); |
| LOCK_GIVE(hdw->ctl_lock); |
| return ret; |
| } |
| |
| |
| int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data) |
| { |
| int ret; |
| |
| LOCK_TAKE(hdw->ctl_lock); |
| |
| hdw->cmd_buffer[0] = FX2CMD_REG_WRITE; /* write register prefix */ |
| PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data); |
| hdw->cmd_buffer[5] = 0; |
| hdw->cmd_buffer[6] = (reg >> 8) & 0xff; |
| hdw->cmd_buffer[7] = reg & 0xff; |
| |
| |
| ret = pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 0); |
| |
| LOCK_GIVE(hdw->ctl_lock); |
| |
| return ret; |
| } |
| |
| |
| static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data) |
| { |
| int ret = 0; |
| |
| LOCK_TAKE(hdw->ctl_lock); |
| |
| hdw->cmd_buffer[0] = FX2CMD_REG_READ; /* read register prefix */ |
| hdw->cmd_buffer[1] = 0; |
| hdw->cmd_buffer[2] = 0; |
| hdw->cmd_buffer[3] = 0; |
| hdw->cmd_buffer[4] = 0; |
| hdw->cmd_buffer[5] = 0; |
| hdw->cmd_buffer[6] = (reg >> 8) & 0xff; |
| hdw->cmd_buffer[7] = reg & 0xff; |
| |
| ret |= pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 4); |
| *data = PVR2_COMPOSE_LE(hdw->cmd_buffer,0); |
| |
| LOCK_GIVE(hdw->ctl_lock); |
| |
| return ret; |
| } |
| |
| |
| void pvr2_hdw_render_useless(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->flag_ok) return; |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Device being rendered inoperable"); |
| if (hdw->vid_stream) { |
| pvr2_stream_setup(hdw->vid_stream,NULL,0,0); |
| } |
| hdw->flag_ok = 0; |
| trace_stbit("flag_ok",hdw->flag_ok); |
| pvr2_hdw_state_sched(hdw); |
| } |
| |
| |
| void pvr2_hdw_device_reset(struct pvr2_hdw *hdw) |
| { |
| int ret; |
| pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset..."); |
| ret = usb_lock_device_for_reset(hdw->usb_dev,NULL); |
| if (ret == 0) { |
| ret = usb_reset_device(hdw->usb_dev); |
| usb_unlock_device(hdw->usb_dev); |
| } else { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to lock USB device ret=%d",ret); |
| } |
| if (init_pause_msec) { |
| pvr2_trace(PVR2_TRACE_INFO, |
| "Waiting %u msec for hardware to settle", |
| init_pause_msec); |
| msleep(init_pause_msec); |
| } |
| |
| } |
| |
| |
| void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val) |
| { |
| char da[1]; |
| unsigned int pipe; |
| int ret; |
| |
| if (!hdw->usb_dev) return; |
| |
| pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val); |
| |
| da[0] = val ? 0x01 : 0x00; |
| |
| /* Write the CPUCS register on the 8051. The lsb of the register |
| is the reset bit; a 1 asserts reset while a 0 clears it. */ |
| pipe = usb_sndctrlpipe(hdw->usb_dev, 0); |
| ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ); |
| if (ret < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "cpureset_assert(%d) error=%d",val,ret); |
| pvr2_hdw_render_useless(hdw); |
| } |
| } |
| |
| |
| int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw) |
| { |
| return pvr2_issue_simple_cmd(hdw,FX2CMD_DEEP_RESET); |
| } |
| |
| |
| int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw) |
| { |
| return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_ON); |
| } |
| |
| |
| int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *hdw) |
| { |
| return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_OFF); |
| } |
| |
| |
| int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) |
| { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Requesting decoder reset"); |
| if (hdw->decoder_client_id) { |
| v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, |
| core, reset, 0); |
| pvr2_hdw_cx25840_vbi_hack(hdw); |
| return 0; |
| } |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Unable to reset decoder: nothing attached"); |
| return -ENOTTY; |
| } |
| |
| |
| static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff) |
| { |
| hdw->flag_ok = !0; |
| return pvr2_issue_simple_cmd(hdw, |
| FX2CMD_HCW_DEMOD_RESETIN | |
| (1 << 8) | |
| ((onoff ? 1 : 0) << 16)); |
| } |
| |
| |
| static int pvr2_hdw_cmd_onair_fe_power_ctrl(struct pvr2_hdw *hdw, int onoff) |
| { |
| hdw->flag_ok = !0; |
| return pvr2_issue_simple_cmd(hdw,(onoff ? |
| FX2CMD_ONAIR_DTV_POWER_ON : |
| FX2CMD_ONAIR_DTV_POWER_OFF)); |
| } |
| |
| |
| static int pvr2_hdw_cmd_onair_digital_path_ctrl(struct pvr2_hdw *hdw, |
| int onoff) |
| { |
| return pvr2_issue_simple_cmd(hdw,(onoff ? |
| FX2CMD_ONAIR_DTV_STREAMING_ON : |
| FX2CMD_ONAIR_DTV_STREAMING_OFF)); |
| } |
| |
| |
| static void pvr2_hdw_cmd_modeswitch(struct pvr2_hdw *hdw,int digitalFl) |
| { |
| int cmode; |
| /* Compare digital/analog desired setting with current setting. If |
| they don't match, fix it... */ |
| cmode = (digitalFl ? PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG); |
| if (cmode == hdw->pathway_state) { |
| /* They match; nothing to do */ |
| return; |
| } |
| |
| switch (hdw->hdw_desc->digital_control_scheme) { |
| case PVR2_DIGITAL_SCHEME_HAUPPAUGE: |
| pvr2_hdw_cmd_hcw_demod_reset(hdw,digitalFl); |
| if (cmode == PVR2_PATHWAY_ANALOG) { |
| /* If moving to analog mode, also force the decoder |
| to reset. If no decoder is attached, then it's |
| ok to ignore this because if/when the decoder |
| attaches, it will reset itself at that time. */ |
| pvr2_hdw_cmd_decoder_reset(hdw); |
| } |
| break; |
| case PVR2_DIGITAL_SCHEME_ONAIR: |
| /* Supposedly we should always have the power on whether in |
| digital or analog mode. But for now do what appears to |
| work... */ |
| pvr2_hdw_cmd_onair_fe_power_ctrl(hdw,digitalFl); |
| break; |
| default: break; |
| } |
| |
| pvr2_hdw_untrip_unlocked(hdw); |
| hdw->pathway_state = cmode; |
| } |
| |
| |
| static void pvr2_led_ctrl_hauppauge(struct pvr2_hdw *hdw, int onoff) |
| { |
| /* change some GPIO data |
| * |
| * note: bit d7 of dir appears to control the LED, |
| * so we shut it off here. |
| * |
| */ |
| if (onoff) { |
| pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000481); |
| } else { |
| pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000401); |
| } |
| pvr2_hdw_gpio_chg_out(hdw, 0xffffffff, 0x00000000); |
| } |
| |
| |
| typedef void (*led_method_func)(struct pvr2_hdw *,int); |
| |
| static led_method_func led_methods[] = { |
| [PVR2_LED_SCHEME_HAUPPAUGE] = pvr2_led_ctrl_hauppauge, |
| }; |
| |
| |
| /* Toggle LED */ |
| static void pvr2_led_ctrl(struct pvr2_hdw *hdw,int onoff) |
| { |
| unsigned int scheme_id; |
| led_method_func fp; |
| |
| if ((!onoff) == (!hdw->led_on)) return; |
| |
| hdw->led_on = onoff != 0; |
| |
| scheme_id = hdw->hdw_desc->led_scheme; |
| if (scheme_id < ARRAY_SIZE(led_methods)) { |
| fp = led_methods[scheme_id]; |
| } else { |
| fp = NULL; |
| } |
| |
| if (fp) (*fp)(hdw,onoff); |
| } |
| |
| |
| /* Stop / start video stream transport */ |
| static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) |
| { |
| int ret; |
| |
| /* If we're in analog mode, then just issue the usual analog |
| command. */ |
| if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { |
| return pvr2_issue_simple_cmd(hdw, |
| (runFl ? |
| FX2CMD_STREAMING_ON : |
| FX2CMD_STREAMING_OFF)); |
| /*Note: Not reached */ |
| } |
| |
| if (hdw->pathway_state != PVR2_PATHWAY_DIGITAL) { |
| /* Whoops, we don't know what mode we're in... */ |
| return -EINVAL; |
| } |
| |
| /* To get here we have to be in digital mode. The mechanism here |
| is unfortunately different for different vendors. So we switch |
| on the device's digital scheme attribute in order to figure out |
| what to do. */ |
| switch (hdw->hdw_desc->digital_control_scheme) { |
| case PVR2_DIGITAL_SCHEME_HAUPPAUGE: |
| return pvr2_issue_simple_cmd(hdw, |
| (runFl ? |
| FX2CMD_HCW_DTV_STREAMING_ON : |
| FX2CMD_HCW_DTV_STREAMING_OFF)); |
| case PVR2_DIGITAL_SCHEME_ONAIR: |
| ret = pvr2_issue_simple_cmd(hdw, |
| (runFl ? |
| FX2CMD_STREAMING_ON : |
| FX2CMD_STREAMING_OFF)); |
| if (ret) return ret; |
| return pvr2_hdw_cmd_onair_digital_path_ctrl(hdw,runFl); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| |
| /* Evaluate whether or not state_pathway_ok can change */ |
| static int state_eval_pathway_ok(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_pathway_ok) { |
| /* Nothing to do if pathway is already ok */ |
| return 0; |
| } |
| if (!hdw->state_pipeline_idle) { |
| /* Not allowed to change anything if pipeline is not idle */ |
| return 0; |
| } |
| pvr2_hdw_cmd_modeswitch(hdw,hdw->input_val == PVR2_CVAL_INPUT_DTV); |
| hdw->state_pathway_ok = !0; |
| trace_stbit("state_pathway_ok",hdw->state_pathway_ok); |
| return !0; |
| } |
| |
| |
| /* Evaluate whether or not state_encoder_ok can change */ |
| static int state_eval_encoder_ok(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_encoder_ok) return 0; |
| if (hdw->flag_tripped) return 0; |
| if (hdw->state_encoder_run) return 0; |
| if (hdw->state_encoder_config) return 0; |
| if (hdw->state_decoder_run) return 0; |
| if (hdw->state_usbstream_run) return 0; |
| if (hdw->pathway_state == PVR2_PATHWAY_DIGITAL) { |
| if (!hdw->hdw_desc->flag_digital_requires_cx23416) return 0; |
| } else if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) { |
| return 0; |
| } |
| |
| if (pvr2_upload_firmware2(hdw) < 0) { |
| hdw->flag_tripped = !0; |
| trace_stbit("flag_tripped",hdw->flag_tripped); |
| return !0; |
| } |
| hdw->state_encoder_ok = !0; |
| trace_stbit("state_encoder_ok",hdw->state_encoder_ok); |
| return !0; |
| } |
| |
| |
| /* Evaluate whether or not state_encoder_config can change */ |
| static int state_eval_encoder_config(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_encoder_config) { |
| if (hdw->state_encoder_ok) { |
| if (hdw->state_pipeline_req && |
| !hdw->state_pipeline_pause) return 0; |
| } |
| hdw->state_encoder_config = 0; |
| hdw->state_encoder_waitok = 0; |
| trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok); |
| /* paranoia - solve race if timer just completed */ |
| del_timer_sync(&hdw->encoder_wait_timer); |
| } else { |
| if (!hdw->state_pathway_ok || |
| (hdw->pathway_state != PVR2_PATHWAY_ANALOG) || |
| !hdw->state_encoder_ok || |
| !hdw->state_pipeline_idle || |
| hdw->state_pipeline_pause || |
| !hdw->state_pipeline_req || |
| !hdw->state_pipeline_config) { |
| /* We must reset the enforced wait interval if |
| anything has happened that might have disturbed |
| the encoder. This should be a rare case. */ |
| if (timer_pending(&hdw->encoder_wait_timer)) { |
| del_timer_sync(&hdw->encoder_wait_timer); |
| } |
| if (hdw->state_encoder_waitok) { |
| /* Must clear the state - therefore we did |
| something to a state bit and must also |
| return true. */ |
| hdw->state_encoder_waitok = 0; |
| trace_stbit("state_encoder_waitok", |
| hdw->state_encoder_waitok); |
| return !0; |
| } |
| return 0; |
| } |
| if (!hdw->state_encoder_waitok) { |
| if (!timer_pending(&hdw->encoder_wait_timer)) { |
| /* waitok flag wasn't set and timer isn't |
| running. Check flag once more to avoid |
| a race then start the timer. This is |
| the point when we measure out a minimal |
| quiet interval before doing something to |
| the encoder. */ |
| if (!hdw->state_encoder_waitok) { |
| hdw->encoder_wait_timer.expires = |
| jiffies + |
| (HZ * TIME_MSEC_ENCODER_WAIT |
| / 1000); |
| add_timer(&hdw->encoder_wait_timer); |
| } |
| } |
| /* We can't continue until we know we have been |
| quiet for the interval measured by this |
| timer. */ |
| return 0; |
| } |
| pvr2_encoder_configure(hdw); |
| if (hdw->state_encoder_ok) hdw->state_encoder_config = !0; |
| } |
| trace_stbit("state_encoder_config",hdw->state_encoder_config); |
| return !0; |
| } |
| |
| |
| /* Return true if the encoder should not be running. */ |
| static int state_check_disable_encoder_run(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->state_encoder_ok) { |
| /* Encoder isn't healthy at the moment, so stop it. */ |
| return !0; |
| } |
| if (!hdw->state_pathway_ok) { |
| /* Mode is not understood at the moment (i.e. it wants to |
| change), so encoder must be stopped. */ |
| return !0; |
| } |
| |
| switch (hdw->pathway_state) { |
| case PVR2_PATHWAY_ANALOG: |
| if (!hdw->state_decoder_run) { |
| /* We're in analog mode and the decoder is not |
| running; thus the encoder should be stopped as |
| well. */ |
| return !0; |
| } |
| break; |
| case PVR2_PATHWAY_DIGITAL: |
| if (hdw->state_encoder_runok) { |
| /* This is a funny case. We're in digital mode so |
| really the encoder should be stopped. However |
| if it really is running, only kill it after |
| runok has been set. This gives a chance for the |
| onair quirk to function (encoder must run |
| briefly first, at least once, before onair |
| digital streaming can work). */ |
| return !0; |
| } |
| break; |
| default: |
| /* Unknown mode; so encoder should be stopped. */ |
| return !0; |
| } |
| |
| /* If we get here, we haven't found a reason to stop the |
| encoder. */ |
| return 0; |
| } |
| |
| |
| /* Return true if the encoder should be running. */ |
| static int state_check_enable_encoder_run(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->state_encoder_ok) { |
| /* Don't run the encoder if it isn't healthy... */ |
| return 0; |
| } |
| if (!hdw->state_pathway_ok) { |
| /* Don't run the encoder if we don't (yet) know what mode |
| we need to be in... */ |
| return 0; |
| } |
| |
| switch (hdw->pathway_state) { |
| case PVR2_PATHWAY_ANALOG: |
| if (hdw->state_decoder_run) { |
| /* In analog mode, if the decoder is running, then |
| run the encoder. */ |
| return !0; |
| } |
| break; |
| case PVR2_PATHWAY_DIGITAL: |
| if ((hdw->hdw_desc->digital_control_scheme == |
| PVR2_DIGITAL_SCHEME_ONAIR) && |
| !hdw->state_encoder_runok) { |
| /* This is a quirk. OnAir hardware won't stream |
| digital until the encoder has been run at least |
| once, for a minimal period of time (empiricially |
| measured to be 1/4 second). So if we're on |
| OnAir hardware and the encoder has never been |
| run at all, then start the encoder. Normal |
| state machine logic in the driver will |
| automatically handle the remaining bits. */ |
| return !0; |
| } |
| break; |
| default: |
| /* For completeness (unknown mode; encoder won't run ever) */ |
| break; |
| } |
| /* If we get here, then we haven't found any reason to run the |
| encoder, so don't run it. */ |
| return 0; |
| } |
| |
| |
| /* Evaluate whether or not state_encoder_run can change */ |
| static int state_eval_encoder_run(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_encoder_run) { |
| if (!state_check_disable_encoder_run(hdw)) return 0; |
| if (hdw->state_encoder_ok) { |
| del_timer_sync(&hdw->encoder_run_timer); |
| if (pvr2_encoder_stop(hdw) < 0) return !0; |
| } |
| hdw->state_encoder_run = 0; |
| } else { |
| if (!state_check_enable_encoder_run(hdw)) return 0; |
| if (pvr2_encoder_start(hdw) < 0) return !0; |
| hdw->state_encoder_run = !0; |
| if (!hdw->state_encoder_runok) { |
| hdw->encoder_run_timer.expires = |
| jiffies + (HZ * TIME_MSEC_ENCODER_OK / 1000); |
| add_timer(&hdw->encoder_run_timer); |
| } |
| } |
| trace_stbit("state_encoder_run",hdw->state_encoder_run); |
| return !0; |
| } |
| |
| |
| /* Timeout function for quiescent timer. */ |
| static void pvr2_hdw_quiescent_timeout(unsigned long data) |
| { |
| struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; |
| hdw->state_decoder_quiescent = !0; |
| trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent); |
| hdw->state_stale = !0; |
| queue_work(hdw->workqueue,&hdw->workpoll); |
| } |
| |
| |
| /* Timeout function for encoder wait timer. */ |
| static void pvr2_hdw_encoder_wait_timeout(unsigned long data) |
| { |
| struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; |
| hdw->state_encoder_waitok = !0; |
| trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok); |
| hdw->state_stale = !0; |
| queue_work(hdw->workqueue,&hdw->workpoll); |
| } |
| |
| |
| /* Timeout function for encoder run timer. */ |
| static void pvr2_hdw_encoder_run_timeout(unsigned long data) |
| { |
| struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; |
| if (!hdw->state_encoder_runok) { |
| hdw->state_encoder_runok = !0; |
| trace_stbit("state_encoder_runok",hdw->state_encoder_runok); |
| hdw->state_stale = !0; |
| queue_work(hdw->workqueue,&hdw->workpoll); |
| } |
| } |
| |
| |
| /* Evaluate whether or not state_decoder_run can change */ |
| static int state_eval_decoder_run(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_decoder_run) { |
| if (hdw->state_encoder_ok) { |
| if (hdw->state_pipeline_req && |
| !hdw->state_pipeline_pause && |
| hdw->state_pathway_ok) return 0; |
| } |
| if (!hdw->flag_decoder_missed) { |
| pvr2_decoder_enable(hdw,0); |
| } |
| hdw->state_decoder_quiescent = 0; |
| hdw->state_decoder_run = 0; |
| /* paranoia - solve race if timer just completed */ |
| del_timer_sync(&hdw->quiescent_timer); |
| } else { |
| if (!hdw->state_decoder_quiescent) { |
| if (!timer_pending(&hdw->quiescent_timer)) { |
| /* We don't do something about the |
| quiescent timer until right here because |
| we also want to catch cases where the |
| decoder was already not running (like |
| after initialization) as opposed to |
| knowing that we had just stopped it. |
| The second flag check is here to cover a |
| race - the timer could have run and set |
| this flag just after the previous check |
| but before we did the pending check. */ |
| if (!hdw->state_decoder_quiescent) { |
| hdw->quiescent_timer.expires = |
| jiffies + |
| (HZ * TIME_MSEC_DECODER_WAIT |
| / 1000); |
| add_timer(&hdw->quiescent_timer); |
| } |
| } |
| /* Don't allow decoder to start again until it has |
| been quiesced first. This little detail should |
| hopefully further stabilize the encoder. */ |
| return 0; |
| } |
| if (!hdw->state_pathway_ok || |
| (hdw->pathway_state != PVR2_PATHWAY_ANALOG) || |
| !hdw->state_pipeline_req || |
| hdw->state_pipeline_pause || |
| !hdw->state_pipeline_config || |
| !hdw->state_encoder_config || |
| !hdw->state_encoder_ok) return 0; |
| del_timer_sync(&hdw->quiescent_timer); |
| if (hdw->flag_decoder_missed) return 0; |
| if (pvr2_decoder_enable(hdw,!0) < 0) return 0; |
| hdw->state_decoder_quiescent = 0; |
| hdw->state_decoder_run = !0; |
| } |
| trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent); |
| trace_stbit("state_decoder_run",hdw->state_decoder_run); |
| return !0; |
| } |
| |
| |
| /* Evaluate whether or not state_usbstream_run can change */ |
| static int state_eval_usbstream_run(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_usbstream_run) { |
| int fl = !0; |
| if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { |
| fl = (hdw->state_encoder_ok && |
| hdw->state_encoder_run); |
| } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) && |
| (hdw->hdw_desc->flag_digital_requires_cx23416)) { |
| fl = hdw->state_encoder_ok; |
| } |
| if (fl && |
| hdw->state_pipeline_req && |
| !hdw->state_pipeline_pause && |
| hdw->state_pathway_ok) { |
| return 0; |
| } |
| pvr2_hdw_cmd_usbstream(hdw,0); |
| hdw->state_usbstream_run = 0; |
| } else { |
| if (!hdw->state_pipeline_req || |
| hdw->state_pipeline_pause || |
| !hdw->state_pathway_ok) return 0; |
| if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { |
| if (!hdw->state_encoder_ok || |
| !hdw->state_encoder_run) return 0; |
| } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) && |
| (hdw->hdw_desc->flag_digital_requires_cx23416)) { |
| if (!hdw->state_encoder_ok) return 0; |
| if (hdw->state_encoder_run) return 0; |
| if (hdw->hdw_desc->digital_control_scheme == |
| PVR2_DIGITAL_SCHEME_ONAIR) { |
| /* OnAir digital receivers won't stream |
| unless the analog encoder has run first. |
| Why? I have no idea. But don't even |
| try until we know the analog side is |
| known to have run. */ |
| if (!hdw->state_encoder_runok) return 0; |
| } |
| } |
| if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0; |
| hdw->state_usbstream_run = !0; |
| } |
| trace_stbit("state_usbstream_run",hdw->state_usbstream_run); |
| return !0; |
| } |
| |
| |
| /* Attempt to configure pipeline, if needed */ |
| static int state_eval_pipeline_config(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_pipeline_config || |
| hdw->state_pipeline_pause) return 0; |
| pvr2_hdw_commit_execute(hdw); |
| return !0; |
| } |
| |
| |
| /* Update pipeline idle and pipeline pause tracking states based on other |
| inputs. This must be called whenever the other relevant inputs have |
| changed. */ |
| static int state_update_pipeline_state(struct pvr2_hdw *hdw) |
| { |
| unsigned int st; |
| int updatedFl = 0; |
| /* Update pipeline state */ |
| st = !(hdw->state_encoder_run || |
| hdw->state_decoder_run || |
| hdw->state_usbstream_run || |
| (!hdw->state_decoder_quiescent)); |
| if (!st != !hdw->state_pipeline_idle) { |
| hdw->state_pipeline_idle = st; |
| updatedFl = !0; |
| } |
| if (hdw->state_pipeline_idle && hdw->state_pipeline_pause) { |
| hdw->state_pipeline_pause = 0; |
| updatedFl = !0; |
| } |
| return updatedFl; |
| } |
| |
| |
| typedef int (*state_eval_func)(struct pvr2_hdw *); |
| |
| /* Set of functions to be run to evaluate various states in the driver. */ |
| static const state_eval_func eval_funcs[] = { |
| state_eval_pathway_ok, |
| state_eval_pipeline_config, |
| state_eval_encoder_ok, |
| state_eval_encoder_config, |
| state_eval_decoder_run, |
| state_eval_encoder_run, |
| state_eval_usbstream_run, |
| }; |
| |
| |
| /* Process various states and return true if we did anything interesting. */ |
| static int pvr2_hdw_state_update(struct pvr2_hdw *hdw) |
| { |
| unsigned int i; |
| int state_updated = 0; |
| int check_flag; |
| |
| if (!hdw->state_stale) return 0; |
| if ((hdw->fw1_state != FW1_STATE_OK) || |
| !hdw->flag_ok) { |
| hdw->state_stale = 0; |
| return !0; |
| } |
| /* This loop is the heart of the entire driver. It keeps trying to |
| evaluate various bits of driver state until nothing changes for |
| one full iteration. Each "bit of state" tracks some global |
| aspect of the driver, e.g. whether decoder should run, if |
| pipeline is configured, usb streaming is on, etc. We separately |
| evaluate each of those questions based on other driver state to |
| arrive at the correct running configuration. */ |
| do { |
| check_flag = 0; |
| state_update_pipeline_state(hdw); |
| /* Iterate over each bit of state */ |
| for (i = 0; (i<ARRAY_SIZE(eval_funcs)) && hdw->flag_ok; i++) { |
| if ((*eval_funcs[i])(hdw)) { |
| check_flag = !0; |
| state_updated = !0; |
| state_update_pipeline_state(hdw); |
| } |
| } |
| } while (check_flag && hdw->flag_ok); |
| hdw->state_stale = 0; |
| trace_stbit("state_stale",hdw->state_stale); |
| return state_updated; |
| } |
| |
| |
| static unsigned int print_input_mask(unsigned int msk, |
| char *buf,unsigned int acnt) |
| { |
| unsigned int idx,ccnt; |
| unsigned int tcnt = 0; |
| for (idx = 0; idx < ARRAY_SIZE(control_values_input); idx++) { |
| if (!((1 << idx) & msk)) continue; |
| ccnt = scnprintf(buf+tcnt, |
| acnt-tcnt, |
| "%s%s", |
| (tcnt ? ", " : ""), |
| control_values_input[idx]); |
| tcnt += ccnt; |
| } |
| return tcnt; |
| } |
| |
| |
| static const char *pvr2_pathway_state_name(int id) |
| { |
| switch (id) { |
| case PVR2_PATHWAY_ANALOG: return "analog"; |
| case PVR2_PATHWAY_DIGITAL: return "digital"; |
| default: return "unknown"; |
| } |
| } |
| |
| |
| static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, |
| char *buf,unsigned int acnt) |
| { |
| switch (which) { |
| case 0: |
| return scnprintf( |
| buf,acnt, |
| "driver:%s%s%s%s%s <mode=%s>", |
| (hdw->flag_ok ? " <ok>" : " <fail>"), |
| (hdw->flag_init_ok ? " <init>" : " <uninitialized>"), |
| (hdw->flag_disconnected ? " <disconnected>" : |
| " <connected>"), |
| (hdw->flag_tripped ? " <tripped>" : ""), |
| (hdw->flag_decoder_missed ? " <no decoder>" : ""), |
| pvr2_pathway_state_name(hdw->pathway_state)); |
| |
| case 1: |
| return scnprintf( |
| buf,acnt, |
| "pipeline:%s%s%s%s", |
| (hdw->state_pipeline_idle ? " <idle>" : ""), |
| (hdw->state_pipeline_config ? |
| " <configok>" : " <stale>"), |
| (hdw->state_pipeline_req ? " <req>" : ""), |
| (hdw->state_pipeline_pause ? " <pause>" : "")); |
| case 2: |
| return scnprintf( |
| buf,acnt, |
| "worker:%s%s%s%s%s%s%s", |
| (hdw->state_decoder_run ? |
| " <decode:run>" : |
| (hdw->state_decoder_quiescent ? |
| "" : " <decode:stop>")), |
| (hdw->state_decoder_quiescent ? |
| " <decode:quiescent>" : ""), |
| (hdw->state_encoder_ok ? |
| "" : " <encode:init>"), |
| (hdw->state_encoder_run ? |
| (hdw->state_encoder_runok ? |
| " <encode:run>" : |
| " <encode:firstrun>") : |
| (hdw->state_encoder_runok ? |
| " <encode:stop>" : |
| " <encode:virgin>")), |
| (hdw->state_encoder_config ? |
| " <encode:configok>" : |
| (hdw->state_encoder_waitok ? |
| "" : " <encode:waitok>")), |
| (hdw->state_usbstream_run ? |
| " <usb:run>" : " <usb:stop>"), |
| (hdw->state_pathway_ok ? |
| " <pathway:ok>" : "")); |
| case 3: |
| return scnprintf( |
| buf,acnt, |
| "state: %s", |
| pvr2_get_state_name(hdw->master_state)); |
| case 4: { |
| unsigned int tcnt = 0; |
| unsigned int ccnt; |
| |
| ccnt = scnprintf(buf, |
| acnt, |
| "Hardware supported inputs: "); |
| tcnt += ccnt; |
| tcnt += print_input_mask(hdw->input_avail_mask, |
| buf+tcnt, |
| acnt-tcnt); |
| if (hdw->input_avail_mask != hdw->input_allowed_mask) { |
| ccnt = scnprintf(buf+tcnt, |
| acnt-tcnt, |
| "; allowed inputs: "); |
| tcnt += ccnt; |
| tcnt += print_input_mask(hdw->input_allowed_mask, |
| buf+tcnt, |
| acnt-tcnt); |
| } |
| return tcnt; |
| } |
| case 5: { |
| struct pvr2_stream_stats stats; |
| if (!hdw->vid_stream) break; |
| pvr2_stream_get_stats(hdw->vid_stream, |
| &stats, |
| 0); |
| return scnprintf( |
| buf,acnt, |
| "Bytes streamed=%u" |
| " URBs: queued=%u idle=%u ready=%u" |
| " processed=%u failed=%u", |
| stats.bytes_processed, |
| stats.buffers_in_queue, |
| stats.buffers_in_idle, |
| stats.buffers_in_ready, |
| stats.buffers_processed, |
| stats.buffers_failed); |
| } |
| case 6: { |
| unsigned int id = hdw->ir_scheme_active; |
| return scnprintf(buf, acnt, "ir scheme: id=%d %s", id, |
| (id >= ARRAY_SIZE(ir_scheme_names) ? |
| "?" : ir_scheme_names[id])); |
| } |
| default: break; |
| } |
| return 0; |
| } |
| |
| |
| /* Generate report containing info about attached sub-devices and attached |
| i2c clients, including an indication of which attached i2c clients are |
| actually sub-devices. */ |
| static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw, |
| char *buf, unsigned int acnt) |
| { |
| struct v4l2_subdev *sd; |
| unsigned int tcnt = 0; |
| unsigned int ccnt; |
| struct i2c_client *client; |
| const char *p; |
| unsigned int id; |
| |
| ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n"); |
| tcnt += ccnt; |
| v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) { |
| id = sd->grp_id; |
| p = NULL; |
| if (id < ARRAY_SIZE(module_names)) p = module_names[id]; |
| if (p) { |
| ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s:", p); |
| tcnt += ccnt; |
| } else { |
| ccnt = scnprintf(buf + tcnt, acnt - tcnt, |
| " (unknown id=%u):", id); |
| tcnt += ccnt; |
| } |
| client = v4l2_get_subdevdata(sd); |
| if (client) { |
| ccnt = scnprintf(buf + tcnt, acnt - tcnt, |
| " %s @ %02x\n", client->name, |
| client->addr); |
| tcnt += ccnt; |
| } else { |
| ccnt = scnprintf(buf + tcnt, acnt - tcnt, |
| " no i2c client\n"); |
| tcnt += ccnt; |
| } |
| } |
| return tcnt; |
| } |
| |
| |
| unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw, |
| char *buf,unsigned int acnt) |
| { |
| unsigned int bcnt,ccnt,idx; |
| bcnt = 0; |
| LOCK_TAKE(hdw->big_lock); |
| for (idx = 0; ; idx++) { |
| ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,acnt); |
| if (!ccnt) break; |
| bcnt += ccnt; acnt -= ccnt; buf += ccnt; |
| if (!acnt) break; |
| buf[0] = '\n'; ccnt = 1; |
| bcnt += ccnt; acnt -= ccnt; buf += ccnt; |
| } |
| ccnt = pvr2_hdw_report_clients(hdw, buf, acnt); |
| bcnt += ccnt; acnt -= ccnt; buf += ccnt; |
| LOCK_GIVE(hdw->big_lock); |
| return bcnt; |
| } |
| |
| |
| static void pvr2_hdw_state_log_state(struct pvr2_hdw *hdw) |
| { |
| char buf[256]; |
| unsigned int idx, ccnt; |
| unsigned int lcnt, ucnt; |
| |
| for (idx = 0; ; idx++) { |
| ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,sizeof(buf)); |
| if (!ccnt) break; |
| printk(KERN_INFO "%s %.*s\n",hdw->name,ccnt,buf); |
| } |
| ccnt = pvr2_hdw_report_clients(hdw, buf, sizeof(buf)); |
| ucnt = 0; |
| while (ucnt < ccnt) { |
| lcnt = 0; |
| while ((lcnt + ucnt < ccnt) && (buf[lcnt + ucnt] != '\n')) { |
| lcnt++; |
| } |
| printk(KERN_INFO "%s %.*s\n", hdw->name, lcnt, buf + ucnt); |
| ucnt += lcnt + 1; |
| } |
| } |
| |
| |
| /* Evaluate and update the driver's current state, taking various actions |
| as appropriate for the update. */ |
| static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw) |
| { |
| unsigned int st; |
| int state_updated = 0; |
| int callback_flag = 0; |
| int analog_mode; |
| |
| pvr2_trace(PVR2_TRACE_STBITS, |
| "Drive state check START"); |
| if (pvrusb2_debug & PVR2_TRACE_STBITS) { |
| pvr2_hdw_state_log_state(hdw); |
| } |
| |
| /* Process all state and get back over disposition */ |
| state_updated = pvr2_hdw_state_update(hdw); |
| |
| analog_mode = (hdw->pathway_state != PVR2_PATHWAY_DIGITAL); |
| |
| /* Update master state based upon all other states. */ |
| if (!hdw->flag_ok) { |
| st = PVR2_STATE_DEAD; |
| } else if (hdw->fw1_state != FW1_STATE_OK) { |
| st = PVR2_STATE_COLD; |
| } else if ((analog_mode || |
| hdw->hdw_desc->flag_digital_requires_cx23416) && |
| !hdw->state_encoder_ok) { |
| st = PVR2_STATE_WARM; |
| } else if (hdw->flag_tripped || |
| (analog_mode && hdw->flag_decoder_missed)) { |
| st = PVR2_STATE_ERROR; |
| } else if (hdw->state_usbstream_run && |
| (!analog_mode || |
| (hdw->state_encoder_run && hdw->state_decoder_run))) { |
| st = PVR2_STATE_RUN; |
| } else { |
| st = PVR2_STATE_READY; |
| } |
| if (hdw->master_state != st) { |
| pvr2_trace(PVR2_TRACE_STATE, |
| "Device state change from %s to %s", |
| pvr2_get_state_name(hdw->master_state), |
| pvr2_get_state_name(st)); |
| pvr2_led_ctrl(hdw,st == PVR2_STATE_RUN); |
| hdw->master_state = st; |
| state_updated = !0; |
| callback_flag = !0; |
| } |
| if (state_updated) { |
| /* Trigger anyone waiting on any state changes here. */ |
| wake_up(&hdw->state_wait_data); |
| } |
| |
| if (pvrusb2_debug & PVR2_TRACE_STBITS) { |
| pvr2_hdw_state_log_state(hdw); |
| } |
| pvr2_trace(PVR2_TRACE_STBITS, |
| "Drive state check DONE callback=%d",callback_flag); |
| |
| return callback_flag; |
| } |
| |
| |
| /* Cause kernel thread to check / update driver state */ |
| static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw) |
| { |
| if (hdw->state_stale) return; |
| hdw->state_stale = !0; |
| trace_stbit("state_stale",hdw->state_stale); |
| queue_work(hdw->workqueue,&hdw->workpoll); |
| } |
| |
| |
| int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp) |
| { |
| return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp); |
| } |
| |
| |
| int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *dp) |
| { |
| return pvr2_read_register(hdw,PVR2_GPIO_OUT,dp); |
| } |
| |
| |
| int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *dp) |
| { |
| return pvr2_read_register(hdw,PVR2_GPIO_IN,dp); |
| } |
| |
| |
| int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val) |
| { |
| u32 cval,nval; |
| int ret; |
| if (~msk) { |
| ret = pvr2_read_register(hdw,PVR2_GPIO_DIR,&cval); |
| if (ret) return ret; |
| nval = (cval & ~msk) | (val & msk); |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO direction changing 0x%x:0x%x" |
| " from 0x%x to 0x%x", |
| msk,val,cval,nval); |
| } else { |
| nval = val; |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO direction changing to 0x%x",nval); |
| } |
| return pvr2_write_register(hdw,PVR2_GPIO_DIR,nval); |
| } |
| |
| |
| int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val) |
| { |
| u32 cval,nval; |
| int ret; |
| if (~msk) { |
| ret = pvr2_read_register(hdw,PVR2_GPIO_OUT,&cval); |
| if (ret) return ret; |
| nval = (cval & ~msk) | (val & msk); |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO output changing 0x%x:0x%x from 0x%x to 0x%x", |
| msk,val,cval,nval); |
| } else { |
| nval = val; |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO output changing to 0x%x",nval); |
| } |
| return pvr2_write_register(hdw,PVR2_GPIO_OUT,nval); |
| } |
| |
| |
| void pvr2_hdw_status_poll(struct pvr2_hdw *hdw) |
| { |
| struct v4l2_tuner *vtp = &hdw->tuner_signal_info; |
| memset(vtp, 0, sizeof(*vtp)); |
| hdw->tuner_signal_stale = 0; |
| /* Note: There apparently is no replacement for VIDIOC_CROPCAP |
| using v4l2-subdev - therefore we can't support that AT ALL right |
| now. (Of course, no sub-drivers seem to implement it either. |
| But now it's a a chicken and egg problem...) */ |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, |
| &hdw->tuner_signal_info); |
| pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll" |
| " type=%u strength=%u audio=0x%x cap=0x%x" |
| " low=%u hi=%u", |
| vtp->type, |
| vtp->signal, vtp->rxsubchans, vtp->capability, |
| vtp->rangelow, vtp->rangehigh); |
| |
| /* We have to do this to avoid getting into constant polling if |
| there's nobody to answer a poll of cropcap info. */ |
| hdw->cropcap_stale = 0; |
| } |
| |
| |
| unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *hdw) |
| { |
| return hdw->input_avail_mask; |
| } |
| |
| |
| unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *hdw) |
| { |
| return hdw->input_allowed_mask; |
| } |
| |
| |
| static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v) |
| { |
| if (hdw->input_val != v) { |
| hdw->input_val = v; |
| hdw->input_dirty = !0; |
| } |
| |
| /* Handle side effects - if we switch to a mode that needs the RF |
| tuner, then select the right frequency choice as well and mark |
| it dirty. */ |
| if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| hdw->freqSelector = 0; |
| hdw->freqDirty = !0; |
| } else if ((hdw->input_val == PVR2_CVAL_INPUT_TV) || |
| (hdw->input_val == PVR2_CVAL_INPUT_DTV)) { |
| hdw->freqSelector = 1; |
| hdw->freqDirty = !0; |
| } |
| return 0; |
| } |
| |
| |
| int pvr2_hdw_set_input_allowed(struct pvr2_hdw *hdw, |
| unsigned int change_mask, |
| unsigned int change_val) |
| { |
| int ret = 0; |
| unsigned int nv,m,idx; |
| LOCK_TAKE(hdw->big_lock); |
| do { |
| nv = hdw->input_allowed_mask & ~change_mask; |
| nv |= (change_val & change_mask); |
| nv &= hdw->input_avail_mask; |
| if (!nv) { |
| /* No legal modes left; return error instead. */ |
| ret = -EPERM; |
| break; |
| } |
| hdw->input_allowed_mask = nv; |
| if ((1 << hdw->input_val) & hdw->input_allowed_mask) { |
| /* Current mode is still in the allowed mask, so |
| we're done. */ |
| break; |
| } |
| /* Select and switch to a mode that is still in the allowed |
| mask */ |
| if (!hdw->input_allowed_mask) { |
| /* Nothing legal; give up */ |
| break; |
| } |
| m = hdw->input_allowed_mask; |
| for (idx = 0; idx < (sizeof(m) << 3); idx++) { |
| if (!((1 << idx) & m)) continue; |
| pvr2_hdw_set_input(hdw,idx); |
| break; |
| } |
| } while (0); |
| LOCK_GIVE(hdw->big_lock); |
| return ret; |
| } |
| |
| |
| /* Find I2C address of eeprom */ |
| static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw) |
| { |
| int result; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR; |
| result = pvr2_send_request(hdw, |
| hdw->cmd_buffer,1, |
| hdw->cmd_buffer,1); |
| if (result < 0) break; |
| result = hdw->cmd_buffer[0]; |
| } while(0); LOCK_GIVE(hdw->ctl_lock); |
| return result; |
| } |
| |
| |
| int pvr2_hdw_register_access(struct pvr2_hdw *hdw, |
| struct v4l2_dbg_match *match, u64 reg_id, |
| int setFl, u64 *val_ptr) |
| { |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| struct v4l2_dbg_register req; |
| int stat = 0; |
| int okFl = 0; |
| |
| if (!capable(CAP_SYS_ADMIN)) return -EPERM; |
| |
| req.match = *match; |
| req.reg = reg_id; |
| if (setFl) req.val = *val_ptr; |
| /* It would be nice to know if a sub-device answered the request */ |
| v4l2_device_call_all(&hdw->v4l2_dev, 0, core, g_register, &req); |
| if (!setFl) *val_ptr = req.val; |
| if (okFl) { |
| return stat; |
| } |
| return -EINVAL; |
| #else |
| return -ENOSYS; |
| #endif |
| } |
| |
| |
| /* |
| Stuff for Emacs to see, in order to encourage consistent editing style: |
| *** Local Variables: *** |
| *** mode: c *** |
| *** fill-column: 75 *** |
| *** tab-width: 8 *** |
| *** c-basic-offset: 8 *** |
| *** End: *** |
| */ |