| /* |
| * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface |
| * |
| * Copyright (C) 2006 Nokia Corporation |
| * Tony Lindgren <tony@atomide.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/usb.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| #include <linux/omap-dma.h> |
| |
| #include "musb_core.h" |
| #include "tusb6010.h" |
| |
| #define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data) |
| |
| #define MAX_DMAREQ 5 /* REVISIT: Really 6, but req5 not OK */ |
| |
| #define OMAP24XX_DMA_EXT_DMAREQ0 2 |
| #define OMAP24XX_DMA_EXT_DMAREQ1 3 |
| #define OMAP242X_DMA_EXT_DMAREQ2 14 |
| #define OMAP242X_DMA_EXT_DMAREQ3 15 |
| #define OMAP242X_DMA_EXT_DMAREQ4 16 |
| #define OMAP242X_DMA_EXT_DMAREQ5 64 |
| |
| struct tusb_omap_dma_ch { |
| struct musb *musb; |
| void __iomem *tbase; |
| unsigned long phys_offset; |
| int epnum; |
| u8 tx; |
| struct musb_hw_ep *hw_ep; |
| |
| int ch; |
| s8 dmareq; |
| s8 sync_dev; |
| |
| struct tusb_omap_dma *tusb_dma; |
| |
| dma_addr_t dma_addr; |
| |
| u32 len; |
| u16 packet_sz; |
| u16 transfer_packet_sz; |
| u32 transfer_len; |
| u32 completed_len; |
| }; |
| |
| struct tusb_omap_dma { |
| struct dma_controller controller; |
| void __iomem *tbase; |
| |
| int ch; |
| s8 dmareq; |
| s8 sync_dev; |
| unsigned multichannel:1; |
| }; |
| |
| /* |
| * Allocate dmareq0 to the current channel unless it's already taken |
| */ |
| static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat) |
| { |
| u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); |
| |
| if (reg != 0) { |
| dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n", |
| chdat->epnum, reg & 0xf); |
| return -EAGAIN; |
| } |
| |
| if (chdat->tx) |
| reg = (1 << 4) | chdat->epnum; |
| else |
| reg = chdat->epnum; |
| |
| musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg); |
| |
| return 0; |
| } |
| |
| static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat) |
| { |
| u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); |
| |
| if ((reg & 0xf) != chdat->epnum) { |
| printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n", |
| chdat->epnum, reg & 0xf); |
| return; |
| } |
| musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0); |
| } |
| |
| /* |
| * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in |
| * musb_gadget.c. |
| */ |
| static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data) |
| { |
| struct dma_channel *channel = (struct dma_channel *)data; |
| struct tusb_omap_dma_ch *chdat = to_chdat(channel); |
| struct tusb_omap_dma *tusb_dma = chdat->tusb_dma; |
| struct musb *musb = chdat->musb; |
| struct device *dev = musb->controller; |
| struct musb_hw_ep *hw_ep = chdat->hw_ep; |
| void __iomem *ep_conf = hw_ep->conf; |
| void __iomem *mbase = musb->mregs; |
| unsigned long remaining, flags, pio; |
| int ch; |
| |
| spin_lock_irqsave(&musb->lock, flags); |
| |
| if (tusb_dma->multichannel) |
| ch = chdat->ch; |
| else |
| ch = tusb_dma->ch; |
| |
| if (ch_status != OMAP_DMA_BLOCK_IRQ) |
| printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status); |
| |
| dev_dbg(musb->controller, "ep%i %s dma callback ch: %i status: %x\n", |
| chdat->epnum, chdat->tx ? "tx" : "rx", |
| ch, ch_status); |
| |
| if (chdat->tx) |
| remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET); |
| else |
| remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET); |
| |
| remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining); |
| |
| /* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */ |
| if (unlikely(remaining > chdat->transfer_len)) { |
| dev_dbg(musb->controller, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n", |
| chdat->tx ? "tx" : "rx", chdat->ch, |
| remaining); |
| remaining = 0; |
| } |
| |
| channel->actual_len = chdat->transfer_len - remaining; |
| pio = chdat->len - channel->actual_len; |
| |
| dev_dbg(musb->controller, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len); |
| |
| /* Transfer remaining 1 - 31 bytes */ |
| if (pio > 0 && pio < 32) { |
| u8 *buf; |
| |
| dev_dbg(musb->controller, "Using PIO for remaining %lu bytes\n", pio); |
| buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len; |
| if (chdat->tx) { |
| dma_unmap_single(dev, chdat->dma_addr, |
| chdat->transfer_len, |
| DMA_TO_DEVICE); |
| musb_write_fifo(hw_ep, pio, buf); |
| } else { |
| dma_unmap_single(dev, chdat->dma_addr, |
| chdat->transfer_len, |
| DMA_FROM_DEVICE); |
| musb_read_fifo(hw_ep, pio, buf); |
| } |
| channel->actual_len += pio; |
| } |
| |
| if (!tusb_dma->multichannel) |
| tusb_omap_free_shared_dmareq(chdat); |
| |
| channel->status = MUSB_DMA_STATUS_FREE; |
| |
| /* Handle only RX callbacks here. TX callbacks must be handled based |
| * on the TUSB DMA status interrupt. |
| * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback |
| * interrupt for RX and TX. |
| */ |
| if (!chdat->tx) |
| musb_dma_completion(musb, chdat->epnum, chdat->tx); |
| |
| /* We must terminate short tx transfers manually by setting TXPKTRDY. |
| * REVISIT: This same problem may occur with other MUSB dma as well. |
| * Easy to test with g_ether by pinging the MUSB board with ping -s54. |
| */ |
| if ((chdat->transfer_len < chdat->packet_sz) |
| || (chdat->transfer_len % chdat->packet_sz != 0)) { |
| u16 csr; |
| |
| if (chdat->tx) { |
| dev_dbg(musb->controller, "terminating short tx packet\n"); |
| musb_ep_select(mbase, chdat->epnum); |
| csr = musb_readw(hw_ep->regs, MUSB_TXCSR); |
| csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY |
| | MUSB_TXCSR_P_WZC_BITS; |
| musb_writew(hw_ep->regs, MUSB_TXCSR, csr); |
| } |
| } |
| |
| spin_unlock_irqrestore(&musb->lock, flags); |
| } |
| |
| static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, |
| u8 rndis_mode, dma_addr_t dma_addr, u32 len) |
| { |
| struct tusb_omap_dma_ch *chdat = to_chdat(channel); |
| struct tusb_omap_dma *tusb_dma = chdat->tusb_dma; |
| struct musb *musb = chdat->musb; |
| struct device *dev = musb->controller; |
| struct musb_hw_ep *hw_ep = chdat->hw_ep; |
| void __iomem *mbase = musb->mregs; |
| void __iomem *ep_conf = hw_ep->conf; |
| dma_addr_t fifo = hw_ep->fifo_sync; |
| struct omap_dma_channel_params dma_params; |
| u32 dma_remaining; |
| int src_burst, dst_burst; |
| u16 csr; |
| u32 psize; |
| int ch; |
| s8 dmareq; |
| s8 sync_dev; |
| |
| if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz)) |
| return false; |
| |
| /* |
| * HW issue #10: Async dma will eventually corrupt the XFR_SIZE |
| * register which will cause missed DMA interrupt. We could try to |
| * use a timer for the callback, but it is unsafe as the XFR_SIZE |
| * register is corrupt, and we won't know if the DMA worked. |
| */ |
| if (dma_addr & 0x2) |
| return false; |
| |
| /* |
| * Because of HW issue #10, it seems like mixing sync DMA and async |
| * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before |
| * using the channel for DMA. |
| */ |
| if (chdat->tx) |
| dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET); |
| else |
| dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET); |
| |
| dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining); |
| if (dma_remaining) { |
| dev_dbg(musb->controller, "Busy %s dma ch%i, not using: %08x\n", |
| chdat->tx ? "tx" : "rx", chdat->ch, |
| dma_remaining); |
| return false; |
| } |
| |
| chdat->transfer_len = len & ~0x1f; |
| |
| if (len < packet_sz) |
| chdat->transfer_packet_sz = chdat->transfer_len; |
| else |
| chdat->transfer_packet_sz = packet_sz; |
| |
| if (tusb_dma->multichannel) { |
| ch = chdat->ch; |
| dmareq = chdat->dmareq; |
| sync_dev = chdat->sync_dev; |
| } else { |
| if (tusb_omap_use_shared_dmareq(chdat) != 0) { |
| dev_dbg(musb->controller, "could not get dma for ep%i\n", chdat->epnum); |
| return false; |
| } |
| if (tusb_dma->ch < 0) { |
| /* REVISIT: This should get blocked earlier, happens |
| * with MSC ErrorRecoveryTest |
| */ |
| WARN_ON(1); |
| return false; |
| } |
| |
| ch = tusb_dma->ch; |
| dmareq = tusb_dma->dmareq; |
| sync_dev = tusb_dma->sync_dev; |
| omap_set_dma_callback(ch, tusb_omap_dma_cb, channel); |
| } |
| |
| chdat->packet_sz = packet_sz; |
| chdat->len = len; |
| channel->actual_len = 0; |
| chdat->dma_addr = dma_addr; |
| channel->status = MUSB_DMA_STATUS_BUSY; |
| |
| /* Since we're recycling dma areas, we need to clean or invalidate */ |
| if (chdat->tx) |
| dma_map_single(dev, phys_to_virt(dma_addr), len, |
| DMA_TO_DEVICE); |
| else |
| dma_map_single(dev, phys_to_virt(dma_addr), len, |
| DMA_FROM_DEVICE); |
| |
| /* Use 16-bit transfer if dma_addr is not 32-bit aligned */ |
| if ((dma_addr & 0x3) == 0) { |
| dma_params.data_type = OMAP_DMA_DATA_TYPE_S32; |
| dma_params.elem_count = 8; /* Elements in frame */ |
| } else { |
| dma_params.data_type = OMAP_DMA_DATA_TYPE_S16; |
| dma_params.elem_count = 16; /* Elements in frame */ |
| fifo = hw_ep->fifo_async; |
| } |
| |
| dma_params.frame_count = chdat->transfer_len / 32; /* Burst sz frame */ |
| |
| dev_dbg(musb->controller, "ep%i %s dma ch%i dma: %pad len: %u(%u) packet_sz: %i(%i)\n", |
| chdat->epnum, chdat->tx ? "tx" : "rx", |
| ch, &dma_addr, chdat->transfer_len, len, |
| chdat->transfer_packet_sz, packet_sz); |
| |
| /* |
| * Prepare omap DMA for transfer |
| */ |
| if (chdat->tx) { |
| dma_params.src_amode = OMAP_DMA_AMODE_POST_INC; |
| dma_params.src_start = (unsigned long)dma_addr; |
| dma_params.src_ei = 0; |
| dma_params.src_fi = 0; |
| |
| dma_params.dst_amode = OMAP_DMA_AMODE_DOUBLE_IDX; |
| dma_params.dst_start = (unsigned long)fifo; |
| dma_params.dst_ei = 1; |
| dma_params.dst_fi = -31; /* Loop 32 byte window */ |
| |
| dma_params.trigger = sync_dev; |
| dma_params.sync_mode = OMAP_DMA_SYNC_FRAME; |
| dma_params.src_or_dst_synch = 0; /* Dest sync */ |
| |
| src_burst = OMAP_DMA_DATA_BURST_16; /* 16x32 read */ |
| dst_burst = OMAP_DMA_DATA_BURST_8; /* 8x32 write */ |
| } else { |
| dma_params.src_amode = OMAP_DMA_AMODE_DOUBLE_IDX; |
| dma_params.src_start = (unsigned long)fifo; |
| dma_params.src_ei = 1; |
| dma_params.src_fi = -31; /* Loop 32 byte window */ |
| |
| dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC; |
| dma_params.dst_start = (unsigned long)dma_addr; |
| dma_params.dst_ei = 0; |
| dma_params.dst_fi = 0; |
| |
| dma_params.trigger = sync_dev; |
| dma_params.sync_mode = OMAP_DMA_SYNC_FRAME; |
| dma_params.src_or_dst_synch = 1; /* Source sync */ |
| |
| src_burst = OMAP_DMA_DATA_BURST_8; /* 8x32 read */ |
| dst_burst = OMAP_DMA_DATA_BURST_16; /* 16x32 write */ |
| } |
| |
| dev_dbg(musb->controller, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n", |
| chdat->epnum, chdat->tx ? "tx" : "rx", |
| (dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16, |
| ((dma_addr & 0x3) == 0) ? "sync" : "async", |
| dma_params.src_start, dma_params.dst_start); |
| |
| omap_set_dma_params(ch, &dma_params); |
| omap_set_dma_src_burst_mode(ch, src_burst); |
| omap_set_dma_dest_burst_mode(ch, dst_burst); |
| omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED); |
| |
| /* |
| * Prepare MUSB for DMA transfer |
| */ |
| if (chdat->tx) { |
| musb_ep_select(mbase, chdat->epnum); |
| csr = musb_readw(hw_ep->regs, MUSB_TXCSR); |
| csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB |
| | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); |
| csr &= ~MUSB_TXCSR_P_UNDERRUN; |
| musb_writew(hw_ep->regs, MUSB_TXCSR, csr); |
| } else { |
| musb_ep_select(mbase, chdat->epnum); |
| csr = musb_readw(hw_ep->regs, MUSB_RXCSR); |
| csr |= MUSB_RXCSR_DMAENAB; |
| csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE); |
| musb_writew(hw_ep->regs, MUSB_RXCSR, |
| csr | MUSB_RXCSR_P_WZC_BITS); |
| } |
| |
| /* |
| * Start DMA transfer |
| */ |
| omap_start_dma(ch); |
| |
| if (chdat->tx) { |
| /* Send transfer_packet_sz packets at a time */ |
| psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET); |
| psize &= ~0x7ff; |
| psize |= chdat->transfer_packet_sz; |
| musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize); |
| |
| musb_writel(ep_conf, TUSB_EP_TX_OFFSET, |
| TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); |
| } else { |
| /* Receive transfer_packet_sz packets at a time */ |
| psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET); |
| psize &= ~(0x7ff << 16); |
| psize |= (chdat->transfer_packet_sz << 16); |
| musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize); |
| |
| musb_writel(ep_conf, TUSB_EP_RX_OFFSET, |
| TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); |
| } |
| |
| return true; |
| } |
| |
| static int tusb_omap_dma_abort(struct dma_channel *channel) |
| { |
| struct tusb_omap_dma_ch *chdat = to_chdat(channel); |
| struct tusb_omap_dma *tusb_dma = chdat->tusb_dma; |
| |
| if (!tusb_dma->multichannel) { |
| if (tusb_dma->ch >= 0) { |
| omap_stop_dma(tusb_dma->ch); |
| omap_free_dma(tusb_dma->ch); |
| tusb_dma->ch = -1; |
| } |
| |
| tusb_dma->dmareq = -1; |
| tusb_dma->sync_dev = -1; |
| } |
| |
| channel->status = MUSB_DMA_STATUS_FREE; |
| |
| return 0; |
| } |
| |
| static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat) |
| { |
| u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); |
| int i, dmareq_nr = -1; |
| |
| const int sync_dev[6] = { |
| OMAP24XX_DMA_EXT_DMAREQ0, |
| OMAP24XX_DMA_EXT_DMAREQ1, |
| OMAP242X_DMA_EXT_DMAREQ2, |
| OMAP242X_DMA_EXT_DMAREQ3, |
| OMAP242X_DMA_EXT_DMAREQ4, |
| OMAP242X_DMA_EXT_DMAREQ5, |
| }; |
| |
| for (i = 0; i < MAX_DMAREQ; i++) { |
| int cur = (reg & (0xf << (i * 5))) >> (i * 5); |
| if (cur == 0) { |
| dmareq_nr = i; |
| break; |
| } |
| } |
| |
| if (dmareq_nr == -1) |
| return -EAGAIN; |
| |
| reg |= (chdat->epnum << (dmareq_nr * 5)); |
| if (chdat->tx) |
| reg |= ((1 << 4) << (dmareq_nr * 5)); |
| musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg); |
| |
| chdat->dmareq = dmareq_nr; |
| chdat->sync_dev = sync_dev[chdat->dmareq]; |
| |
| return 0; |
| } |
| |
| static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat) |
| { |
| u32 reg; |
| |
| if (!chdat || chdat->dmareq < 0) |
| return; |
| |
| reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); |
| reg &= ~(0x1f << (chdat->dmareq * 5)); |
| musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg); |
| |
| chdat->dmareq = -1; |
| chdat->sync_dev = -1; |
| } |
| |
| static struct dma_channel *dma_channel_pool[MAX_DMAREQ]; |
| |
| static struct dma_channel * |
| tusb_omap_dma_allocate(struct dma_controller *c, |
| struct musb_hw_ep *hw_ep, |
| u8 tx) |
| { |
| int ret, i; |
| const char *dev_name; |
| struct tusb_omap_dma *tusb_dma; |
| struct musb *musb; |
| void __iomem *tbase; |
| struct dma_channel *channel = NULL; |
| struct tusb_omap_dma_ch *chdat = NULL; |
| u32 reg; |
| |
| tusb_dma = container_of(c, struct tusb_omap_dma, controller); |
| musb = tusb_dma->controller.musb; |
| tbase = musb->ctrl_base; |
| |
| reg = musb_readl(tbase, TUSB_DMA_INT_MASK); |
| if (tx) |
| reg &= ~(1 << hw_ep->epnum); |
| else |
| reg &= ~(1 << (hw_ep->epnum + 15)); |
| musb_writel(tbase, TUSB_DMA_INT_MASK, reg); |
| |
| /* REVISIT: Why does dmareq5 not work? */ |
| if (hw_ep->epnum == 0) { |
| dev_dbg(musb->controller, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx"); |
| return NULL; |
| } |
| |
| for (i = 0; i < MAX_DMAREQ; i++) { |
| struct dma_channel *ch = dma_channel_pool[i]; |
| if (ch->status == MUSB_DMA_STATUS_UNKNOWN) { |
| ch->status = MUSB_DMA_STATUS_FREE; |
| channel = ch; |
| chdat = ch->private_data; |
| break; |
| } |
| } |
| |
| if (!channel) |
| return NULL; |
| |
| if (tx) { |
| chdat->tx = 1; |
| dev_name = "TUSB transmit"; |
| } else { |
| chdat->tx = 0; |
| dev_name = "TUSB receive"; |
| } |
| |
| chdat->musb = tusb_dma->controller.musb; |
| chdat->tbase = tusb_dma->tbase; |
| chdat->hw_ep = hw_ep; |
| chdat->epnum = hw_ep->epnum; |
| chdat->dmareq = -1; |
| chdat->completed_len = 0; |
| chdat->tusb_dma = tusb_dma; |
| |
| channel->max_len = 0x7fffffff; |
| channel->desired_mode = 0; |
| channel->actual_len = 0; |
| |
| if (tusb_dma->multichannel) { |
| ret = tusb_omap_dma_allocate_dmareq(chdat); |
| if (ret != 0) |
| goto free_dmareq; |
| |
| ret = omap_request_dma(chdat->sync_dev, dev_name, |
| tusb_omap_dma_cb, channel, &chdat->ch); |
| if (ret != 0) |
| goto free_dmareq; |
| } else if (tusb_dma->ch == -1) { |
| tusb_dma->dmareq = 0; |
| tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0; |
| |
| /* Callback data gets set later in the shared dmareq case */ |
| ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared", |
| tusb_omap_dma_cb, NULL, &tusb_dma->ch); |
| if (ret != 0) |
| goto free_dmareq; |
| |
| chdat->dmareq = -1; |
| chdat->ch = -1; |
| } |
| |
| dev_dbg(musb->controller, "ep%i %s dma: %s dma%i dmareq%i sync%i\n", |
| chdat->epnum, |
| chdat->tx ? "tx" : "rx", |
| chdat->ch >= 0 ? "dedicated" : "shared", |
| chdat->ch >= 0 ? chdat->ch : tusb_dma->ch, |
| chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq, |
| chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev); |
| |
| return channel; |
| |
| free_dmareq: |
| tusb_omap_dma_free_dmareq(chdat); |
| |
| dev_dbg(musb->controller, "ep%i: Could not get a DMA channel\n", chdat->epnum); |
| channel->status = MUSB_DMA_STATUS_UNKNOWN; |
| |
| return NULL; |
| } |
| |
| static void tusb_omap_dma_release(struct dma_channel *channel) |
| { |
| struct tusb_omap_dma_ch *chdat = to_chdat(channel); |
| struct musb *musb = chdat->musb; |
| void __iomem *tbase = musb->ctrl_base; |
| u32 reg; |
| |
| dev_dbg(musb->controller, "ep%i ch%i\n", chdat->epnum, chdat->ch); |
| |
| reg = musb_readl(tbase, TUSB_DMA_INT_MASK); |
| if (chdat->tx) |
| reg |= (1 << chdat->epnum); |
| else |
| reg |= (1 << (chdat->epnum + 15)); |
| musb_writel(tbase, TUSB_DMA_INT_MASK, reg); |
| |
| reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR); |
| if (chdat->tx) |
| reg |= (1 << chdat->epnum); |
| else |
| reg |= (1 << (chdat->epnum + 15)); |
| musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg); |
| |
| channel->status = MUSB_DMA_STATUS_UNKNOWN; |
| |
| if (chdat->ch >= 0) { |
| omap_stop_dma(chdat->ch); |
| omap_free_dma(chdat->ch); |
| chdat->ch = -1; |
| } |
| |
| if (chdat->dmareq >= 0) |
| tusb_omap_dma_free_dmareq(chdat); |
| |
| channel = NULL; |
| } |
| |
| void tusb_dma_controller_destroy(struct dma_controller *c) |
| { |
| struct tusb_omap_dma *tusb_dma; |
| int i; |
| |
| tusb_dma = container_of(c, struct tusb_omap_dma, controller); |
| for (i = 0; i < MAX_DMAREQ; i++) { |
| struct dma_channel *ch = dma_channel_pool[i]; |
| if (ch) { |
| kfree(ch->private_data); |
| kfree(ch); |
| } |
| } |
| |
| if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0) |
| omap_free_dma(tusb_dma->ch); |
| |
| kfree(tusb_dma); |
| } |
| EXPORT_SYMBOL_GPL(tusb_dma_controller_destroy); |
| |
| struct dma_controller * |
| tusb_dma_controller_create(struct musb *musb, void __iomem *base) |
| { |
| void __iomem *tbase = musb->ctrl_base; |
| struct tusb_omap_dma *tusb_dma; |
| int i; |
| |
| /* REVISIT: Get dmareq lines used from board-*.c */ |
| |
| musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff); |
| musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0); |
| |
| musb_writel(tbase, TUSB_DMA_REQ_CONF, |
| TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
| | TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
| | TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2)); |
| |
| tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL); |
| if (!tusb_dma) |
| goto out; |
| |
| tusb_dma->controller.musb = musb; |
| tusb_dma->tbase = musb->ctrl_base; |
| |
| tusb_dma->ch = -1; |
| tusb_dma->dmareq = -1; |
| tusb_dma->sync_dev = -1; |
| |
| tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate; |
| tusb_dma->controller.channel_release = tusb_omap_dma_release; |
| tusb_dma->controller.channel_program = tusb_omap_dma_program; |
| tusb_dma->controller.channel_abort = tusb_omap_dma_abort; |
| |
| if (musb->tusb_revision >= TUSB_REV_30) |
| tusb_dma->multichannel = 1; |
| |
| for (i = 0; i < MAX_DMAREQ; i++) { |
| struct dma_channel *ch; |
| struct tusb_omap_dma_ch *chdat; |
| |
| ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL); |
| if (!ch) |
| goto cleanup; |
| |
| dma_channel_pool[i] = ch; |
| |
| chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL); |
| if (!chdat) |
| goto cleanup; |
| |
| ch->status = MUSB_DMA_STATUS_UNKNOWN; |
| ch->private_data = chdat; |
| } |
| |
| return &tusb_dma->controller; |
| |
| cleanup: |
| musb_dma_controller_destroy(&tusb_dma->controller); |
| out: |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(tusb_dma_controller_create); |