| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "imx51-pinfunc.h" |
| |
| / { |
| aliases { |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| spi0 = &ecspi1; |
| spi1 = &ecspi2; |
| spi2 = &cspi; |
| }; |
| |
| tzic: tz-interrupt-controller@e0000000 { |
| compatible = "fsl,imx51-tzic", "fsl,tzic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0xe0000000 0x4000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fsl,imx-ckil", "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| ckih1 { |
| compatible = "fsl,imx-ckih1", "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| ckih2 { |
| compatible = "fsl,imx-ckih2", "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a8"; |
| reg = <0>; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clks 24>; |
| clock-names = "cpu"; |
| operating-points = < |
| /* kHz uV (No regulator support) */ |
| 160000 0 |
| 800000 0 |
| >; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&tzic>; |
| ranges; |
| |
| ipu: ipu@40000000 { |
| #crtc-cells = <1>; |
| compatible = "fsl,imx51-ipu"; |
| reg = <0x40000000 0x20000000>; |
| interrupts = <11 10>; |
| clocks = <&clks 59>, <&clks 110>, <&clks 61>; |
| clock-names = "bus", "di0", "di1"; |
| resets = <&src 2>; |
| }; |
| |
| aips@70000000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x10000000>; |
| ranges; |
| |
| spba@70000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x40000>; |
| ranges; |
| |
| esdhc1: esdhc@70004000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70004000 0x4000>; |
| interrupts = <1>; |
| clocks = <&clks 44>, <&clks 0>, <&clks 71>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| esdhc2: esdhc@70008000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70008000 0x4000>; |
| interrupts = <2>; |
| clocks = <&clks 45>, <&clks 0>, <&clks 72>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@7000c000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x7000c000 0x4000>; |
| interrupts = <33>; |
| clocks = <&clks 32>, <&clks 33>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi1: ecspi@70010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x70010000 0x4000>; |
| interrupts = <36>; |
| clocks = <&clks 51>, <&clks 52>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@70014000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x70014000 0x4000>; |
| interrupts = <30>; |
| clocks = <&clks 49>; |
| dmas = <&sdma 24 1 0>, |
| <&sdma 25 1 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| esdhc3: esdhc@70020000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70020000 0x4000>; |
| interrupts = <3>; |
| clocks = <&clks 46>, <&clks 0>, <&clks 73>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc4: esdhc@70024000 { |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70024000 0x4000>; |
| interrupts = <4>; |
| clocks = <&clks 47>, <&clks 0>, <&clks 74>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usbphy0: usbphy@0 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks 124>; |
| clock-names = "main_clk"; |
| status = "okay"; |
| }; |
| |
| usbotg: usb@73f80000 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80000 0x0200>; |
| interrupts = <18>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 0>; |
| fsl,usbphy = <&usbphy0>; |
| status = "disabled"; |
| }; |
| |
| usbh1: usb@73f80200 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80200 0x0200>; |
| interrupts = <14>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 1>; |
| status = "disabled"; |
| }; |
| |
| usbh2: usb@73f80400 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80400 0x0200>; |
| interrupts = <16>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 2>; |
| status = "disabled"; |
| }; |
| |
| usbh3: usb@73f80600 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80600 0x0200>; |
| interrupts = <17>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 3>; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@73f80800 { |
| #index-cells = <1>; |
| compatible = "fsl,imx51-usbmisc"; |
| reg = <0x73f80800 0x200>; |
| clocks = <&clks 108>; |
| }; |
| |
| gpio1: gpio@73f84000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f84000 0x4000>; |
| interrupts = <50 51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@73f88000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f88000 0x4000>; |
| interrupts = <52 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@73f8c000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f8c000 0x4000>; |
| interrupts = <54 55>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@73f90000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f90000 0x4000>; |
| interrupts = <56 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| kpp: kpp@73f94000 { |
| compatible = "fsl,imx51-kpp", "fsl,imx21-kpp"; |
| reg = <0x73f94000 0x4000>; |
| interrupts = <60>; |
| clocks = <&clks 0>; |
| status = "disabled"; |
| }; |
| |
| wdog1: wdog@73f98000 { |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f98000 0x4000>; |
| interrupts = <58>; |
| clocks = <&clks 0>; |
| }; |
| |
| wdog2: wdog@73f9c000 { |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f9c000 0x4000>; |
| interrupts = <59>; |
| clocks = <&clks 0>; |
| status = "disabled"; |
| }; |
| |
| gpt: timer@73fa0000 { |
| compatible = "fsl,imx51-gpt", "fsl,imx31-gpt"; |
| reg = <0x73fa0000 0x4000>; |
| interrupts = <39>; |
| clocks = <&clks 36>, <&clks 41>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| iomuxc: iomuxc@73fa8000 { |
| compatible = "fsl,imx51-iomuxc"; |
| reg = <0x73fa8000 0x4000>; |
| }; |
| |
| pwm1: pwm@73fb4000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; |
| reg = <0x73fb4000 0x4000>; |
| clocks = <&clks 37>, <&clks 38>; |
| clock-names = "ipg", "per"; |
| interrupts = <61>; |
| }; |
| |
| pwm2: pwm@73fb8000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; |
| reg = <0x73fb8000 0x4000>; |
| clocks = <&clks 39>, <&clks 40>; |
| clock-names = "ipg", "per"; |
| interrupts = <94>; |
| }; |
| |
| uart1: serial@73fbc000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fbc000 0x4000>; |
| interrupts = <31>; |
| clocks = <&clks 28>, <&clks 29>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@73fc0000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fc0000 0x4000>; |
| interrupts = <32>; |
| clocks = <&clks 30>, <&clks 31>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| src: src@73fd0000 { |
| compatible = "fsl,imx51-src"; |
| reg = <0x73fd0000 0x4000>; |
| #reset-cells = <1>; |
| }; |
| |
| clks: ccm@73fd4000{ |
| compatible = "fsl,imx51-ccm"; |
| reg = <0x73fd4000 0x4000>; |
| interrupts = <0 71 0x04 0 72 0x04>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| aips@80000000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x10000000>; |
| ranges; |
| |
| iim: iim@83f98000 { |
| compatible = "fsl,imx51-iim", "fsl,imx27-iim"; |
| reg = <0x83f98000 0x4000>; |
| interrupts = <69>; |
| clocks = <&clks 107>; |
| }; |
| |
| ecspi2: ecspi@83fac000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x83fac000 0x4000>; |
| interrupts = <37>; |
| clocks = <&clks 53>, <&clks 54>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| sdma: sdma@83fb0000 { |
| compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; |
| reg = <0x83fb0000 0x4000>; |
| interrupts = <6>; |
| clocks = <&clks 56>, <&clks 56>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; |
| }; |
| |
| cspi: cspi@83fc0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; |
| reg = <0x83fc0000 0x4000>; |
| interrupts = <38>; |
| clocks = <&clks 55>, <&clks 55>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@83fc4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; |
| reg = <0x83fc4000 0x4000>; |
| interrupts = <63>; |
| clocks = <&clks 35>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@83fc8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; |
| reg = <0x83fc8000 0x4000>; |
| interrupts = <62>; |
| clocks = <&clks 34>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@83fcc000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fcc000 0x4000>; |
| interrupts = <29>; |
| clocks = <&clks 48>; |
| dmas = <&sdma 28 0 0>, |
| <&sdma 29 0 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| audmux: audmux@83fd0000 { |
| compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; |
| reg = <0x83fd0000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| weim: weim@83fda000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,imx51-weim"; |
| reg = <0x83fda000 0x1000>; |
| clocks = <&clks 57>; |
| ranges = < |
| 0 0 0xb0000000 0x08000000 |
| 1 0 0xb8000000 0x08000000 |
| 2 0 0xc0000000 0x08000000 |
| 3 0 0xc8000000 0x04000000 |
| 4 0 0xcc000000 0x02000000 |
| 5 0 0xce000000 0x02000000 |
| >; |
| status = "disabled"; |
| }; |
| |
| nfc: nand@83fdb000 { |
| compatible = "fsl,imx51-nand"; |
| reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; |
| interrupts = <8>; |
| clocks = <&clks 60>; |
| status = "disabled"; |
| }; |
| |
| pata: pata@83fe0000 { |
| compatible = "fsl,imx51-pata", "fsl,imx27-pata"; |
| reg = <0x83fe0000 0x4000>; |
| interrupts = <70>; |
| clocks = <&clks 161>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@83fe8000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fe8000 0x4000>; |
| interrupts = <96>; |
| clocks = <&clks 50>; |
| dmas = <&sdma 46 0 0>, |
| <&sdma 47 0 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| fec: ethernet@83fec000 { |
| compatible = "fsl,imx51-fec", "fsl,imx27-fec"; |
| reg = <0x83fec000 0x4000>; |
| interrupts = <87>; |
| clocks = <&clks 42>, <&clks 42>, <&clks 42>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
| |
| &iomuxc { |
| audmux { |
| pinctrl_audmux_1: audmuxgrp-1 { |
| fsl,pins = < |
| MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 |
| MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 |
| MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 |
| MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 |
| >; |
| }; |
| }; |
| |
| fec { |
| pinctrl_fec_1: fecgrp-1 { |
| fsl,pins = < |
| MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 |
| MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 |
| MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 |
| MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 |
| MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 |
| MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 |
| MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 |
| MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 |
| MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 |
| MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 |
| MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 |
| MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 |
| MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 |
| MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 |
| MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 |
| MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 |
| MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 |
| >; |
| }; |
| |
| pinctrl_fec_2: fecgrp-2 { |
| fsl,pins = < |
| MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 |
| MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 |
| MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 |
| MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 |
| MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 |
| MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 |
| MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 |
| MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 |
| MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 |
| MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 |
| MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 |
| MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 |
| MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 |
| MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 |
| MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 |
| MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 |
| MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 |
| MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 |
| >; |
| }; |
| }; |
| |
| ecspi1 { |
| pinctrl_ecspi1_1: ecspi1grp-1 { |
| fsl,pins = < |
| MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 |
| MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 |
| MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 |
| >; |
| }; |
| }; |
| |
| ecspi2 { |
| pinctrl_ecspi2_1: ecspi2grp-1 { |
| fsl,pins = < |
| MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 |
| MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 |
| MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 |
| >; |
| }; |
| }; |
| |
| esdhc1 { |
| pinctrl_esdhc1_1: esdhc1grp-1 { |
| fsl,pins = < |
| MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 |
| MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 |
| MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 |
| MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 |
| MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 |
| MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 |
| >; |
| }; |
| }; |
| |
| esdhc2 { |
| pinctrl_esdhc2_1: esdhc2grp-1 { |
| fsl,pins = < |
| MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 |
| MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 |
| MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 |
| MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 |
| MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 |
| MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 |
| >; |
| }; |
| }; |
| |
| i2c2 { |
| pinctrl_i2c2_1: i2c2grp-1 { |
| fsl,pins = < |
| MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed |
| MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed |
| >; |
| }; |
| |
| pinctrl_i2c2_2: i2c2grp-2 { |
| fsl,pins = < |
| MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed |
| MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed |
| >; |
| }; |
| |
| pinctrl_i2c2_3: i2c2grp-3 { |
| fsl,pins = < |
| MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed |
| MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed |
| >; |
| }; |
| }; |
| |
| ipu_disp1 { |
| pinctrl_ipu_disp1_1: ipudisp1grp-1 { |
| fsl,pins = < |
| MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 |
| MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 |
| MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 |
| MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 |
| MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 |
| MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 |
| MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 |
| MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 |
| MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 |
| MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 |
| MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 |
| MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 |
| MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 |
| MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 |
| MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 |
| MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 |
| MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 |
| MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 |
| MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 |
| MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 |
| MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 |
| MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 |
| MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 |
| MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 |
| MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */ |
| MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */ |
| >; |
| }; |
| }; |
| |
| ipu_disp2 { |
| pinctrl_ipu_disp2_1: ipudisp2grp-1 { |
| fsl,pins = < |
| MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 |
| MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 |
| MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 |
| MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 |
| MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 |
| MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 |
| MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 |
| MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 |
| MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 |
| MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 |
| MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 |
| MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 |
| MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 |
| MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 |
| MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 |
| MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 |
| MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */ |
| MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */ |
| MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */ |
| MX51_PAD_DI_GP4__DI2_PIN15 0x5 /* DE */ |
| >; |
| }; |
| }; |
| |
| kpp { |
| pinctrl_kpp_1: kppgrp-1 { |
| fsl,pins = < |
| MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 |
| MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 |
| MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 |
| MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 |
| MX51_PAD_KEY_COL0__KEY_COL0 0xe8 |
| MX51_PAD_KEY_COL1__KEY_COL1 0xe8 |
| MX51_PAD_KEY_COL2__KEY_COL2 0xe8 |
| MX51_PAD_KEY_COL3__KEY_COL3 0xe8 |
| >; |
| }; |
| }; |
| |
| pata { |
| pinctrl_pata_1: patagrp-1 { |
| fsl,pins = < |
| MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004 |
| MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004 |
| MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004 |
| MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004 |
| MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004 |
| MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004 |
| MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004 |
| MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004 |
| MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004 |
| MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004 |
| MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004 |
| MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004 |
| MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004 |
| MX51_PAD_NANDF_D15__PATA_DATA15 0x2004 |
| MX51_PAD_NANDF_D14__PATA_DATA14 0x2004 |
| MX51_PAD_NANDF_D13__PATA_DATA13 0x2004 |
| MX51_PAD_NANDF_D12__PATA_DATA12 0x2004 |
| MX51_PAD_NANDF_D11__PATA_DATA11 0x2004 |
| MX51_PAD_NANDF_D10__PATA_DATA10 0x2004 |
| MX51_PAD_NANDF_D9__PATA_DATA9 0x2004 |
| MX51_PAD_NANDF_D8__PATA_DATA8 0x2004 |
| MX51_PAD_NANDF_D7__PATA_DATA7 0x2004 |
| MX51_PAD_NANDF_D6__PATA_DATA6 0x2004 |
| MX51_PAD_NANDF_D5__PATA_DATA5 0x2004 |
| MX51_PAD_NANDF_D4__PATA_DATA4 0x2004 |
| MX51_PAD_NANDF_D3__PATA_DATA3 0x2004 |
| MX51_PAD_NANDF_D2__PATA_DATA2 0x2004 |
| MX51_PAD_NANDF_D1__PATA_DATA1 0x2004 |
| MX51_PAD_NANDF_D0__PATA_DATA0 0x2004 |
| >; |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1_1: uart1grp-1 { |
| fsl,pins = < |
| MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 |
| MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 |
| MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 |
| MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 |
| >; |
| }; |
| }; |
| |
| uart2 { |
| pinctrl_uart2_1: uart2grp-1 { |
| fsl,pins = < |
| MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 |
| MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 |
| >; |
| }; |
| }; |
| |
| uart3 { |
| pinctrl_uart3_1: uart3grp-1 { |
| fsl,pins = < |
| MX51_PAD_EIM_D25__UART3_RXD 0x1c5 |
| MX51_PAD_EIM_D26__UART3_TXD 0x1c5 |
| MX51_PAD_EIM_D27__UART3_RTS 0x1c5 |
| MX51_PAD_EIM_D24__UART3_CTS 0x1c5 |
| >; |
| }; |
| |
| pinctrl_uart3_2: uart3grp-2 { |
| fsl,pins = < |
| MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 |
| MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 |
| >; |
| }; |
| }; |
| |
| usbh1 { |
| pinctrl_usbh1_1: usbh1grp-1 { |
| fsl,pins = < |
| MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 |
| MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 |
| MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 |
| MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 |
| MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 |
| MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 |
| MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 |
| MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 |
| MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 |
| MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 |
| MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 |
| MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 |
| >; |
| }; |
| }; |
| |
| usbh2 { |
| pinctrl_usbh2_1: usbh2grp-1 { |
| fsl,pins = < |
| MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5 |
| MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5 |
| MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5 |
| MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5 |
| MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5 |
| MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5 |
| MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5 |
| MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5 |
| MX51_PAD_EIM_A24__USBH2_CLK 0x1e5 |
| MX51_PAD_EIM_A25__USBH2_DIR 0x1e5 |
| MX51_PAD_EIM_A27__USBH2_NXT 0x1e5 |
| MX51_PAD_EIM_A26__USBH2_STP 0x1e5 |
| >; |
| }; |
| }; |
| }; |