| /* |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&icoll>; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| gpio2 = &gpio2; |
| gpio3 = &gpio3; |
| gpio4 = &gpio4; |
| }; |
| |
| cpus { |
| cpu@0 { |
| compatible = "arm,arm926ejs"; |
| }; |
| }; |
| |
| apb@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x80000>; |
| ranges; |
| |
| apbh@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x3c900>; |
| ranges; |
| |
| icoll: interrupt-controller@80000000 { |
| compatible = "fsl,imx28-icoll", "fsl,mxs-icoll"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x80000000 0x2000>; |
| }; |
| |
| hsadc@80002000 { |
| reg = <0x80002000 2000>; |
| interrupts = <13 87>; |
| status = "disabled"; |
| }; |
| |
| dma-apbh@80004000 { |
| compatible = "fsl,imx28-dma-apbh"; |
| reg = <0x80004000 2000>; |
| }; |
| |
| perfmon@80006000 { |
| reg = <0x80006000 800>; |
| interrupts = <27>; |
| status = "disabled"; |
| }; |
| |
| bch@8000a000 { |
| reg = <0x8000a000 2000>; |
| interrupts = <41>; |
| status = "disabled"; |
| }; |
| |
| gpmi@8000c000 { |
| reg = <0x8000c000 2000>; |
| interrupts = <42 88>; |
| status = "disabled"; |
| }; |
| |
| ssp0: ssp@80010000 { |
| reg = <0x80010000 2000>; |
| interrupts = <96 82>; |
| fsl,ssp-dma-channel = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp1: ssp@80012000 { |
| reg = <0x80012000 2000>; |
| interrupts = <97 83>; |
| fsl,ssp-dma-channel = <1>; |
| status = "disabled"; |
| }; |
| |
| ssp2: ssp@80014000 { |
| reg = <0x80014000 2000>; |
| interrupts = <98 84>; |
| fsl,ssp-dma-channel = <2>; |
| status = "disabled"; |
| }; |
| |
| ssp3: ssp@80016000 { |
| reg = <0x80016000 2000>; |
| interrupts = <99 85>; |
| fsl,ssp-dma-channel = <3>; |
| status = "disabled"; |
| }; |
| |
| pinctrl@80018000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-pinctrl", "simple-bus"; |
| reg = <0x80018000 2000>; |
| |
| gpio0: gpio@0 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <127>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@1 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <126>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <125>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@3 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <124>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@4 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <123>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| duart_pins_a: duart@0 { |
| reg = <0>; |
| fsl,pinmux-ids = <0x3102 0x3112>; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| mac0_pins_a: mac0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = <0x4000 0x4010 0x4020 |
| 0x4030 0x4040 0x4060 0x4070 |
| 0x4080 0x4100>; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mac1_pins_a: mac1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 |
| 0x40e1 0x40b1 0x40c1>; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_8bit_pins_a: mmc0-8bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = <0x2000 0x2010 0x2020 |
| 0x2030 0x2040 0x2050 0x2060 |
| 0x2070 0x2080 0x2090 0x20a0>; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_cd_cfg: mmc0-cd-cfg { |
| fsl,pinmux-ids = <0x2090>; |
| fsl,pull-up = <0>; |
| }; |
| |
| mmc0_sck_cfg: mmc0-sck-cfg { |
| fsl,pinmux-ids = <0x20a0>; |
| fsl,drive-strength = <2>; |
| fsl,pull-up = <0>; |
| }; |
| |
| i2c0_pins_a: i2c0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = <0x3180 0x3190>; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| }; |
| |
| digctl@8001c000 { |
| reg = <0x8001c000 2000>; |
| interrupts = <89>; |
| status = "disabled"; |
| }; |
| |
| etm@80022000 { |
| reg = <0x80022000 2000>; |
| status = "disabled"; |
| }; |
| |
| dma-apbx@80024000 { |
| compatible = "fsl,imx28-dma-apbx"; |
| reg = <0x80024000 2000>; |
| }; |
| |
| dcp@80028000 { |
| reg = <0x80028000 2000>; |
| interrupts = <52 53 54>; |
| status = "disabled"; |
| }; |
| |
| pxp@8002a000 { |
| reg = <0x8002a000 2000>; |
| interrupts = <39>; |
| status = "disabled"; |
| }; |
| |
| ocotp@8002c000 { |
| reg = <0x8002c000 2000>; |
| status = "disabled"; |
| }; |
| |
| axi-ahb@8002e000 { |
| reg = <0x8002e000 2000>; |
| status = "disabled"; |
| }; |
| |
| lcdif@80030000 { |
| reg = <0x80030000 2000>; |
| interrupts = <38 86>; |
| status = "disabled"; |
| }; |
| |
| can0: can@80032000 { |
| reg = <0x80032000 2000>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| |
| can1: can@80034000 { |
| reg = <0x80034000 2000>; |
| interrupts = <9>; |
| status = "disabled"; |
| }; |
| |
| simdbg@8003c000 { |
| reg = <0x8003c000 200>; |
| status = "disabled"; |
| }; |
| |
| simgpmisel@8003c200 { |
| reg = <0x8003c200 100>; |
| status = "disabled"; |
| }; |
| |
| simsspsel@8003c300 { |
| reg = <0x8003c300 100>; |
| status = "disabled"; |
| }; |
| |
| simmemsel@8003c400 { |
| reg = <0x8003c400 100>; |
| status = "disabled"; |
| }; |
| |
| gpiomon@8003c500 { |
| reg = <0x8003c500 100>; |
| status = "disabled"; |
| }; |
| |
| simenet@8003c700 { |
| reg = <0x8003c700 100>; |
| status = "disabled"; |
| }; |
| |
| armjtag@8003c800 { |
| reg = <0x8003c800 100>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apbx@80040000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80040000 0x40000>; |
| ranges; |
| |
| clkctl@80040000 { |
| reg = <0x80040000 2000>; |
| status = "disabled"; |
| }; |
| |
| saif0: saif@80042000 { |
| reg = <0x80042000 2000>; |
| interrupts = <59 80>; |
| status = "disabled"; |
| }; |
| |
| power@80044000 { |
| reg = <0x80044000 2000>; |
| status = "disabled"; |
| }; |
| |
| saif1: saif@80046000 { |
| reg = <0x80046000 2000>; |
| interrupts = <58 81>; |
| status = "disabled"; |
| }; |
| |
| lradc@80050000 { |
| reg = <0x80050000 2000>; |
| status = "disabled"; |
| }; |
| |
| spdif@80054000 { |
| reg = <0x80054000 2000>; |
| interrupts = <45 66>; |
| status = "disabled"; |
| }; |
| |
| rtc@80056000 { |
| reg = <0x80056000 2000>; |
| interrupts = <28 29>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@80058000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-i2c"; |
| reg = <0x80058000 2000>; |
| interrupts = <111 68>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@8005a000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-i2c"; |
| reg = <0x8005a000 2000>; |
| interrupts = <110 69>; |
| status = "disabled"; |
| }; |
| |
| pwm@80064000 { |
| reg = <0x80064000 2000>; |
| status = "disabled"; |
| }; |
| |
| timrot@80068000 { |
| reg = <0x80068000 2000>; |
| status = "disabled"; |
| }; |
| |
| auart0: serial@8006a000 { |
| reg = <0x8006a000 0x2000>; |
| interrupts = <112 70 71>; |
| status = "disabled"; |
| }; |
| |
| auart1: serial@8006c000 { |
| reg = <0x8006c000 0x2000>; |
| interrupts = <113 72 73>; |
| status = "disabled"; |
| }; |
| |
| auart2: serial@8006e000 { |
| reg = <0x8006e000 0x2000>; |
| interrupts = <114 74 75>; |
| status = "disabled"; |
| }; |
| |
| auart3: serial@80070000 { |
| reg = <0x80070000 0x2000>; |
| interrupts = <115 76 77>; |
| status = "disabled"; |
| }; |
| |
| auart4: serial@80072000 { |
| reg = <0x80072000 0x2000>; |
| interrupts = <116 78 79>; |
| status = "disabled"; |
| }; |
| |
| duart: serial@80074000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80074000 0x1000>; |
| interrupts = <47>; |
| status = "disabled"; |
| }; |
| |
| usbphy0: usbphy@8007c000 { |
| reg = <0x8007c000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| usbphy1: usbphy@8007e000 { |
| reg = <0x8007e000 0x2000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| ahb@80080000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80080000 0x80000>; |
| ranges; |
| |
| usbctrl0: usbctrl@80080000 { |
| reg = <0x80080000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| usbctrl1: usbctrl@80090000 { |
| reg = <0x80090000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| dflpt@800c0000 { |
| reg = <0x800c0000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| mac0: ethernet@800f0000 { |
| compatible = "fsl,imx28-fec"; |
| reg = <0x800f0000 0x4000>; |
| interrupts = <101>; |
| status = "disabled"; |
| }; |
| |
| mac1: ethernet@800f4000 { |
| compatible = "fsl,imx28-fec"; |
| reg = <0x800f4000 0x4000>; |
| interrupts = <102>; |
| status = "disabled"; |
| }; |
| |
| switch@800f8000 { |
| reg = <0x800f8000 0x8000>; |
| status = "disabled"; |
| }; |
| |
| }; |
| }; |