| /* |
| * GPIO driver for NXP LPC18xx/43xx. |
| * |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| |
| /* LPC18xx GPIO register offsets */ |
| #define LPC18XX_REG_DIR(n) (0x2000 + n * sizeof(u32)) |
| |
| #define LPC18XX_MAX_PORTS 8 |
| #define LPC18XX_PINS_PER_PORT 32 |
| |
| struct lpc18xx_gpio_chip { |
| struct gpio_chip gpio; |
| void __iomem *base; |
| struct clk *clk; |
| spinlock_t lock; |
| }; |
| |
| static inline struct lpc18xx_gpio_chip *to_lpc18xx_gpio(struct gpio_chip *chip) |
| { |
| return container_of(chip, struct lpc18xx_gpio_chip, gpio); |
| } |
| |
| static int lpc18xx_gpio_request(struct gpio_chip *chip, unsigned offset) |
| { |
| return pinctrl_request_gpio(offset); |
| } |
| |
| static void lpc18xx_gpio_free(struct gpio_chip *chip, unsigned offset) |
| { |
| pinctrl_free_gpio(offset); |
| } |
| |
| static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip); |
| writeb(value ? 1 : 0, gc->base + offset); |
| } |
| |
| static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip); |
| return !!readb(gc->base + offset); |
| } |
| |
| static int lpc18xx_gpio_direction(struct gpio_chip *chip, unsigned offset, |
| bool out) |
| { |
| struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip); |
| unsigned long flags; |
| u32 port, pin, dir; |
| |
| port = offset / LPC18XX_PINS_PER_PORT; |
| pin = offset % LPC18XX_PINS_PER_PORT; |
| |
| spin_lock_irqsave(&gc->lock, flags); |
| dir = readl(gc->base + LPC18XX_REG_DIR(port)); |
| if (out) |
| dir |= BIT(pin); |
| else |
| dir &= ~BIT(pin); |
| writel(dir, gc->base + LPC18XX_REG_DIR(port)); |
| spin_unlock_irqrestore(&gc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int lpc18xx_gpio_direction_input(struct gpio_chip *chip, |
| unsigned offset) |
| { |
| return lpc18xx_gpio_direction(chip, offset, false); |
| } |
| |
| static int lpc18xx_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| lpc18xx_gpio_set(chip, offset, value); |
| return lpc18xx_gpio_direction(chip, offset, true); |
| } |
| |
| static struct gpio_chip lpc18xx_chip = { |
| .label = "lpc18xx/43xx-gpio", |
| .request = lpc18xx_gpio_request, |
| .free = lpc18xx_gpio_free, |
| .direction_input = lpc18xx_gpio_direction_input, |
| .direction_output = lpc18xx_gpio_direction_output, |
| .set = lpc18xx_gpio_set, |
| .get = lpc18xx_gpio_get, |
| .ngpio = LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int lpc18xx_gpio_probe(struct platform_device *pdev) |
| { |
| struct lpc18xx_gpio_chip *gc; |
| struct resource *res; |
| int ret; |
| |
| gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); |
| if (!gc) |
| return -ENOMEM; |
| |
| gc->gpio = lpc18xx_chip; |
| platform_set_drvdata(pdev, gc); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| gc->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(gc->base)) |
| return PTR_ERR(gc->base); |
| |
| gc->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(gc->clk)) { |
| dev_err(&pdev->dev, "input clock not found\n"); |
| return PTR_ERR(gc->clk); |
| } |
| |
| ret = clk_prepare_enable(gc->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable clock\n"); |
| return ret; |
| } |
| |
| spin_lock_init(&gc->lock); |
| |
| gc->gpio.dev = &pdev->dev; |
| |
| ret = gpiochip_add(&gc->gpio); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add gpio chip\n"); |
| clk_disable_unprepare(gc->clk); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int lpc18xx_gpio_remove(struct platform_device *pdev) |
| { |
| struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev); |
| |
| gpiochip_remove(&gc->gpio); |
| clk_disable_unprepare(gc->clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id lpc18xx_gpio_match[] = { |
| { .compatible = "nxp,lpc1850-gpio" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, lpc18xx_gpio_match); |
| |
| static struct platform_driver lpc18xx_gpio_driver = { |
| .probe = lpc18xx_gpio_probe, |
| .remove = lpc18xx_gpio_remove, |
| .driver = { |
| .name = "lpc18xx-gpio", |
| .of_match_table = lpc18xx_gpio_match, |
| }, |
| }; |
| module_platform_driver(lpc18xx_gpio_driver); |
| |
| MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); |
| MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx"); |
| MODULE_LICENSE("GPL v2"); |