| /* |
| * drivers/base/memory.c - basic Memory class support |
| * |
| * Written by Matt Tolentino <matthew.e.tolentino@intel.com> |
| * Dave Hansen <haveblue@us.ibm.com> |
| * |
| * This file provides the necessary infrastructure to represent |
| * a SPARSEMEM-memory-model system's physical memory in /sysfs. |
| * All arch-independent code that assumes MEMORY_HOTPLUG requires |
| * SPARSEMEM should be contained here, or in mm/memory_hotplug.c. |
| */ |
| |
| #include <linux/sysdev.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> /* capable() */ |
| #include <linux/topology.h> |
| #include <linux/device.h> |
| #include <linux/memory.h> |
| #include <linux/kobject.h> |
| #include <linux/memory_hotplug.h> |
| #include <linux/mm.h> |
| #include <asm/atomic.h> |
| #include <asm/uaccess.h> |
| |
| #define MEMORY_CLASS_NAME "memory" |
| |
| static struct sysdev_class memory_sysdev_class = { |
| set_kset_name(MEMORY_CLASS_NAME), |
| }; |
| |
| static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj) |
| { |
| return MEMORY_CLASS_NAME; |
| } |
| |
| static int memory_uevent(struct kset *kset, struct kobject *kobj, char **envp, |
| int num_envp, char *buffer, int buffer_size) |
| { |
| int retval = 0; |
| |
| return retval; |
| } |
| |
| static struct kset_uevent_ops memory_uevent_ops = { |
| .name = memory_uevent_name, |
| .uevent = memory_uevent, |
| }; |
| |
| static struct notifier_block *memory_chain; |
| |
| static int register_memory_notifier(struct notifier_block *nb) |
| { |
| return notifier_chain_register(&memory_chain, nb); |
| } |
| |
| static void unregister_memory_notifier(struct notifier_block *nb) |
| { |
| notifier_chain_unregister(&memory_chain, nb); |
| } |
| |
| /* |
| * register_memory - Setup a sysfs device for a memory block |
| */ |
| static int |
| register_memory(struct memory_block *memory, struct mem_section *section, |
| struct node *root) |
| { |
| int error; |
| |
| memory->sysdev.cls = &memory_sysdev_class; |
| memory->sysdev.id = __section_nr(section); |
| |
| error = sysdev_register(&memory->sysdev); |
| |
| if (root && !error) |
| error = sysfs_create_link(&root->sysdev.kobj, |
| &memory->sysdev.kobj, |
| kobject_name(&memory->sysdev.kobj)); |
| |
| return error; |
| } |
| |
| static void |
| unregister_memory(struct memory_block *memory, struct mem_section *section, |
| struct node *root) |
| { |
| BUG_ON(memory->sysdev.cls != &memory_sysdev_class); |
| BUG_ON(memory->sysdev.id != __section_nr(section)); |
| |
| sysdev_unregister(&memory->sysdev); |
| if (root) |
| sysfs_remove_link(&root->sysdev.kobj, |
| kobject_name(&memory->sysdev.kobj)); |
| } |
| |
| /* |
| * use this as the physical section index that this memsection |
| * uses. |
| */ |
| |
| static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf) |
| { |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| return sprintf(buf, "%08lx\n", mem->phys_index); |
| } |
| |
| /* |
| * online, offline, going offline, etc. |
| */ |
| static ssize_t show_mem_state(struct sys_device *dev, char *buf) |
| { |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| ssize_t len = 0; |
| |
| /* |
| * We can probably put these states in a nice little array |
| * so that they're not open-coded |
| */ |
| switch (mem->state) { |
| case MEM_ONLINE: |
| len = sprintf(buf, "online\n"); |
| break; |
| case MEM_OFFLINE: |
| len = sprintf(buf, "offline\n"); |
| break; |
| case MEM_GOING_OFFLINE: |
| len = sprintf(buf, "going-offline\n"); |
| break; |
| default: |
| len = sprintf(buf, "ERROR-UNKNOWN-%ld\n", |
| mem->state); |
| WARN_ON(1); |
| break; |
| } |
| |
| return len; |
| } |
| |
| static inline int memory_notify(unsigned long val, void *v) |
| { |
| return notifier_call_chain(&memory_chain, val, v); |
| } |
| |
| /* |
| * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is |
| * OK to have direct references to sparsemem variables in here. |
| */ |
| static int |
| memory_block_action(struct memory_block *mem, unsigned long action) |
| { |
| int i; |
| unsigned long psection; |
| unsigned long start_pfn, start_paddr; |
| struct page *first_page; |
| int ret; |
| int old_state = mem->state; |
| |
| psection = mem->phys_index; |
| first_page = pfn_to_page(psection << PFN_SECTION_SHIFT); |
| |
| /* |
| * The probe routines leave the pages reserved, just |
| * as the bootmem code does. Make sure they're still |
| * that way. |
| */ |
| if (action == MEM_ONLINE) { |
| for (i = 0; i < PAGES_PER_SECTION; i++) { |
| if (PageReserved(first_page+i)) |
| continue; |
| |
| printk(KERN_WARNING "section number %ld page number %d " |
| "not reserved, was it already online? \n", |
| psection, i); |
| return -EBUSY; |
| } |
| } |
| |
| switch (action) { |
| case MEM_ONLINE: |
| start_pfn = page_to_pfn(first_page); |
| ret = online_pages(start_pfn, PAGES_PER_SECTION); |
| break; |
| case MEM_OFFLINE: |
| mem->state = MEM_GOING_OFFLINE; |
| memory_notify(MEM_GOING_OFFLINE, NULL); |
| start_paddr = page_to_pfn(first_page) << PAGE_SHIFT; |
| ret = remove_memory(start_paddr, |
| PAGES_PER_SECTION << PAGE_SHIFT); |
| if (ret) { |
| mem->state = old_state; |
| break; |
| } |
| memory_notify(MEM_MAPPING_INVALID, NULL); |
| break; |
| default: |
| printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n", |
| __FUNCTION__, mem, action, action); |
| WARN_ON(1); |
| ret = -EINVAL; |
| } |
| /* |
| * For now, only notify on successful memory operations |
| */ |
| if (!ret) |
| memory_notify(action, NULL); |
| |
| return ret; |
| } |
| |
| static int memory_block_change_state(struct memory_block *mem, |
| unsigned long to_state, unsigned long from_state_req) |
| { |
| int ret = 0; |
| down(&mem->state_sem); |
| |
| if (mem->state != from_state_req) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = memory_block_action(mem, to_state); |
| if (!ret) |
| mem->state = to_state; |
| |
| out: |
| up(&mem->state_sem); |
| return ret; |
| } |
| |
| static ssize_t |
| store_mem_state(struct sys_device *dev, const char *buf, size_t count) |
| { |
| struct memory_block *mem; |
| unsigned int phys_section_nr; |
| int ret = -EINVAL; |
| |
| mem = container_of(dev, struct memory_block, sysdev); |
| phys_section_nr = mem->phys_index; |
| |
| if (!valid_section_nr(phys_section_nr)) |
| goto out; |
| |
| if (!strncmp(buf, "online", min((int)count, 6))) |
| ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE); |
| else if(!strncmp(buf, "offline", min((int)count, 7))) |
| ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE); |
| out: |
| if (ret) |
| return ret; |
| return count; |
| } |
| |
| /* |
| * phys_device is a bad name for this. What I really want |
| * is a way to differentiate between memory ranges that |
| * are part of physical devices that constitute |
| * a complete removable unit or fru. |
| * i.e. do these ranges belong to the same physical device, |
| * s.t. if I offline all of these sections I can then |
| * remove the physical device? |
| */ |
| static ssize_t show_phys_device(struct sys_device *dev, char *buf) |
| { |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| return sprintf(buf, "%d\n", mem->phys_device); |
| } |
| |
| static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL); |
| static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state); |
| static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL); |
| |
| #define mem_create_simple_file(mem, attr_name) \ |
| sysdev_create_file(&mem->sysdev, &attr_##attr_name) |
| #define mem_remove_simple_file(mem, attr_name) \ |
| sysdev_remove_file(&mem->sysdev, &attr_##attr_name) |
| |
| /* |
| * Block size attribute stuff |
| */ |
| static ssize_t |
| print_block_size(struct class *class, char *buf) |
| { |
| return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); |
| } |
| |
| static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); |
| |
| static int block_size_init(void) |
| { |
| sysfs_create_file(&memory_sysdev_class.kset.kobj, |
| &class_attr_block_size_bytes.attr); |
| return 0; |
| } |
| |
| /* |
| * Some architectures will have custom drivers to do this, and |
| * will not need to do it from userspace. The fake hot-add code |
| * as well as ppc64 will do all of their discovery in userspace |
| * and will require this interface. |
| */ |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| static ssize_t |
| memory_probe_store(struct class *class, const char __user *buf, size_t count) |
| { |
| u64 phys_addr; |
| int ret; |
| |
| phys_addr = simple_strtoull(buf, NULL, 0); |
| |
| ret = add_memory(phys_addr, PAGES_PER_SECTION << PAGE_SHIFT); |
| |
| if (ret) |
| count = ret; |
| |
| return count; |
| } |
| static CLASS_ATTR(probe, 0700, NULL, memory_probe_store); |
| |
| static int memory_probe_init(void) |
| { |
| sysfs_create_file(&memory_sysdev_class.kset.kobj, |
| &class_attr_probe.attr); |
| return 0; |
| } |
| #else |
| #define memory_probe_init(...) do {} while (0) |
| #endif |
| |
| /* |
| * Note that phys_device is optional. It is here to allow for |
| * differentiation between which *physical* devices each |
| * section belongs to... |
| */ |
| |
| static int add_memory_block(unsigned long node_id, struct mem_section *section, |
| unsigned long state, int phys_device) |
| { |
| struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| int ret = 0; |
| |
| if (!mem) |
| return -ENOMEM; |
| |
| mem->phys_index = __section_nr(section); |
| mem->state = state; |
| init_MUTEX(&mem->state_sem); |
| mem->phys_device = phys_device; |
| |
| ret = register_memory(mem, section, NULL); |
| if (!ret) |
| ret = mem_create_simple_file(mem, phys_index); |
| if (!ret) |
| ret = mem_create_simple_file(mem, state); |
| if (!ret) |
| ret = mem_create_simple_file(mem, phys_device); |
| |
| return ret; |
| } |
| |
| /* |
| * For now, we have a linear search to go find the appropriate |
| * memory_block corresponding to a particular phys_index. If |
| * this gets to be a real problem, we can always use a radix |
| * tree or something here. |
| * |
| * This could be made generic for all sysdev classes. |
| */ |
| static struct memory_block *find_memory_block(struct mem_section *section) |
| { |
| struct kobject *kobj; |
| struct sys_device *sysdev; |
| struct memory_block *mem; |
| char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1]; |
| |
| /* |
| * This only works because we know that section == sysdev->id |
| * slightly redundant with sysdev_register() |
| */ |
| sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section)); |
| |
| kobj = kset_find_obj(&memory_sysdev_class.kset, name); |
| if (!kobj) |
| return NULL; |
| |
| sysdev = container_of(kobj, struct sys_device, kobj); |
| mem = container_of(sysdev, struct memory_block, sysdev); |
| |
| return mem; |
| } |
| |
| int remove_memory_block(unsigned long node_id, struct mem_section *section, |
| int phys_device) |
| { |
| struct memory_block *mem; |
| |
| mem = find_memory_block(section); |
| mem_remove_simple_file(mem, phys_index); |
| mem_remove_simple_file(mem, state); |
| mem_remove_simple_file(mem, phys_device); |
| unregister_memory(mem, section, NULL); |
| |
| return 0; |
| } |
| |
| /* |
| * need an interface for the VM to add new memory regions, |
| * but without onlining it. |
| */ |
| int register_new_memory(struct mem_section *section) |
| { |
| return add_memory_block(0, section, MEM_OFFLINE, 0); |
| } |
| |
| int unregister_memory_section(struct mem_section *section) |
| { |
| if (!valid_section(section)) |
| return -EINVAL; |
| |
| return remove_memory_block(0, section, 0); |
| } |
| |
| /* |
| * Initialize the sysfs support for memory devices... |
| */ |
| int __init memory_dev_init(void) |
| { |
| unsigned int i; |
| int ret; |
| |
| memory_sysdev_class.kset.uevent_ops = &memory_uevent_ops; |
| ret = sysdev_class_register(&memory_sysdev_class); |
| |
| /* |
| * Create entries for memory sections that were found |
| * during boot and have been initialized |
| */ |
| for (i = 0; i < NR_MEM_SECTIONS; i++) { |
| if (!valid_section_nr(i)) |
| continue; |
| add_memory_block(0, __nr_to_section(i), MEM_ONLINE, 0); |
| } |
| |
| memory_probe_init(); |
| block_size_init(); |
| |
| return ret; |
| } |