| /* |
| * AD714X CapTouch Programmable Controller driver (I2C bus) |
| * |
| * Copyright 2009 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/input.h> /* BUS_I2C */ |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include "ad714x.h" |
| |
| #ifdef CONFIG_PM |
| static int ad714x_i2c_suspend(struct i2c_client *client, pm_message_t message) |
| { |
| return ad714x_disable(i2c_get_clientdata(client)); |
| } |
| |
| static int ad714x_i2c_resume(struct i2c_client *client) |
| { |
| return ad714x_enable(i2c_get_clientdata(client)); |
| } |
| #else |
| # define ad714x_i2c_suspend NULL |
| # define ad714x_i2c_resume NULL |
| #endif |
| |
| static int ad714x_i2c_write(struct device *dev, unsigned short reg, |
| unsigned short data) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret = 0; |
| u8 *_reg = (u8 *)® |
| u8 *_data = (u8 *)&data; |
| |
| u8 tx[4] = { |
| _reg[1], |
| _reg[0], |
| _data[1], |
| _data[0] |
| }; |
| |
| ret = i2c_master_send(client, tx, 4); |
| if (ret < 0) |
| dev_err(&client->dev, "I2C write error\n"); |
| |
| return ret; |
| } |
| |
| static int ad714x_i2c_read(struct device *dev, unsigned short reg, |
| unsigned short *data) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret = 0; |
| u8 *_reg = (u8 *)® |
| u8 *_data = (u8 *)data; |
| |
| u8 tx[2] = { |
| _reg[1], |
| _reg[0] |
| }; |
| u8 rx[2]; |
| |
| ret = i2c_master_send(client, tx, 2); |
| if (ret >= 0) |
| ret = i2c_master_recv(client, rx, 2); |
| |
| if (unlikely(ret < 0)) { |
| dev_err(&client->dev, "I2C read error\n"); |
| } else { |
| _data[0] = rx[1]; |
| _data[1] = rx[0]; |
| } |
| |
| return ret; |
| } |
| |
| static int __devinit ad714x_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct ad714x_chip *chip; |
| |
| chip = ad714x_probe(&client->dev, BUS_I2C, client->irq, |
| ad714x_i2c_read, ad714x_i2c_write); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| |
| i2c_set_clientdata(client, chip); |
| |
| return 0; |
| } |
| |
| static int __devexit ad714x_i2c_remove(struct i2c_client *client) |
| { |
| struct ad714x_chip *chip = i2c_get_clientdata(client); |
| |
| ad714x_remove(chip); |
| i2c_set_clientdata(client, NULL); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ad714x_id[] = { |
| { "ad7142_captouch", 0 }, |
| { "ad7147_captouch", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ad714x_id); |
| |
| static struct i2c_driver ad714x_i2c_driver = { |
| .driver = { |
| .name = "ad714x_captouch", |
| }, |
| .probe = ad714x_i2c_probe, |
| .remove = __devexit_p(ad714x_i2c_remove), |
| .suspend = ad714x_i2c_suspend, |
| .resume = ad714x_i2c_resume, |
| .id_table = ad714x_id, |
| }; |
| |
| static __init int ad714x_i2c_init(void) |
| { |
| return i2c_add_driver(&ad714x_i2c_driver); |
| } |
| module_init(ad714x_i2c_init); |
| |
| static __exit void ad714x_i2c_exit(void) |
| { |
| i2c_del_driver(&ad714x_i2c_driver); |
| } |
| module_exit(ad714x_i2c_exit); |
| |
| MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver"); |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); |
| MODULE_LICENSE("GPL"); |