| /* |
| * wm0010.c -- WM0010 DSP Driver |
| * |
| * Copyright 2012 Wolfson Microelectronics PLC. |
| * |
| * Authors: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * Dimitris Papastamos <dp@opensource.wolfsonmicro.com> |
| * Scott Ling <sl@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/irqreturn.h> |
| #include <linux/init.h> |
| #include <linux/spi/spi.h> |
| #include <linux/firmware.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/mutex.h> |
| #include <linux/workqueue.h> |
| |
| #include <sound/soc.h> |
| #include <sound/wm0010.h> |
| |
| #define DEVICE_ID_WM0010 10 |
| |
| /* We only support v1 of the .dfw INFO record */ |
| #define INFO_VERSION 1 |
| |
| enum dfw_cmd { |
| DFW_CMD_FUSE = 0x01, |
| DFW_CMD_CODE_HDR, |
| DFW_CMD_CODE_DATA, |
| DFW_CMD_PLL, |
| DFW_CMD_INFO = 0xff |
| }; |
| |
| struct dfw_binrec { |
| u8 command; |
| u32 length:24; |
| u32 address; |
| uint8_t data[0]; |
| } __packed; |
| |
| struct dfw_inforec { |
| u8 info_version; |
| u8 tool_major_version; |
| u8 tool_minor_version; |
| u8 dsp_target; |
| }; |
| |
| struct dfw_pllrec { |
| u8 command; |
| u32 length:24; |
| u32 address; |
| u32 clkctrl1; |
| u32 clkctrl2; |
| u32 clkctrl3; |
| u32 ldetctrl; |
| u32 uart_div; |
| u32 spi_div; |
| } __packed; |
| |
| static struct pll_clock_map { |
| int max_sysclk; |
| int max_pll_spi_speed; |
| u32 pll_clkctrl1; |
| } pll_clock_map[] = { /* Dividers */ |
| { 22000000, 26000000, 0x00201f11 }, /* 2,32,2 */ |
| { 18000000, 26000000, 0x00203f21 }, /* 2,64,4 */ |
| { 14000000, 26000000, 0x00202620 }, /* 1,39,4 */ |
| { 10000000, 22000000, 0x00203120 }, /* 1,50,4 */ |
| { 6500000, 22000000, 0x00204520 }, /* 1,70,4 */ |
| { 5500000, 22000000, 0x00103f10 }, /* 1,64,2 */ |
| }; |
| |
| enum wm0010_state { |
| WM0010_POWER_OFF, |
| WM0010_OUT_OF_RESET, |
| WM0010_BOOTROM, |
| WM0010_STAGE2, |
| WM0010_FIRMWARE, |
| }; |
| |
| struct wm0010_priv { |
| struct snd_soc_codec *codec; |
| |
| struct mutex lock; |
| struct device *dev; |
| |
| struct wm0010_pdata pdata; |
| |
| int gpio_reset; |
| int gpio_reset_value; |
| |
| struct regulator_bulk_data core_supplies[2]; |
| struct regulator *dbvdd; |
| |
| int sysclk; |
| |
| enum wm0010_state state; |
| bool boot_failed; |
| bool ready; |
| bool pll_running; |
| int max_spi_freq; |
| int board_max_spi_speed; |
| u32 pll_clkctrl1; |
| |
| spinlock_t irq_lock; |
| int irq; |
| |
| struct completion boot_completion; |
| }; |
| |
| struct wm0010_spi_msg { |
| struct spi_message m; |
| struct spi_transfer t; |
| u8 *tx_buf; |
| u8 *rx_buf; |
| size_t len; |
| }; |
| |
| static const struct snd_soc_dapm_widget wm0010_dapm_widgets[] = { |
| SND_SOC_DAPM_SUPPLY("CLKIN", SND_SOC_NOPM, 0, 0, NULL, 0), |
| }; |
| |
| static const struct snd_soc_dapm_route wm0010_dapm_routes[] = { |
| { "SDI2 Capture", NULL, "SDI1 Playback" }, |
| { "SDI1 Capture", NULL, "SDI2 Playback" }, |
| |
| { "SDI1 Capture", NULL, "CLKIN" }, |
| { "SDI2 Capture", NULL, "CLKIN" }, |
| { "SDI1 Playback", NULL, "CLKIN" }, |
| { "SDI2 Playback", NULL, "CLKIN" }, |
| }; |
| |
| static const char *wm0010_state_to_str(enum wm0010_state state) |
| { |
| const char *state_to_str[] = { |
| "Power off", |
| "Out of reset", |
| "Boot ROM", |
| "Stage2", |
| "Firmware" |
| }; |
| |
| if (state < 0 || state >= ARRAY_SIZE(state_to_str)) |
| return "null"; |
| return state_to_str[state]; |
| } |
| |
| /* Called with wm0010->lock held */ |
| static void wm0010_halt(struct snd_soc_codec *codec) |
| { |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| unsigned long flags; |
| enum wm0010_state state; |
| |
| /* Fetch the wm0010 state */ |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| state = wm0010->state; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| switch (state) { |
| case WM0010_POWER_OFF: |
| /* If there's nothing to do, bail out */ |
| return; |
| case WM0010_OUT_OF_RESET: |
| case WM0010_BOOTROM: |
| case WM0010_STAGE2: |
| case WM0010_FIRMWARE: |
| /* Remember to put chip back into reset */ |
| gpio_set_value_cansleep(wm0010->gpio_reset, |
| wm0010->gpio_reset_value); |
| /* Disable the regulators */ |
| regulator_disable(wm0010->dbvdd); |
| regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies), |
| wm0010->core_supplies); |
| break; |
| } |
| |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| wm0010->state = WM0010_POWER_OFF; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| } |
| |
| struct wm0010_boot_xfer { |
| struct list_head list; |
| struct snd_soc_codec *codec; |
| struct completion *done; |
| struct spi_message m; |
| struct spi_transfer t; |
| }; |
| |
| /* Called with wm0010->lock held */ |
| static void wm0010_mark_boot_failure(struct wm0010_priv *wm0010) |
| { |
| enum wm0010_state state; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| state = wm0010->state; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| dev_err(wm0010->dev, "Failed to transition from `%s' state to `%s' state\n", |
| wm0010_state_to_str(state), wm0010_state_to_str(state + 1)); |
| |
| wm0010->boot_failed = true; |
| } |
| |
| static void wm0010_boot_xfer_complete(void *data) |
| { |
| struct wm0010_boot_xfer *xfer = data; |
| struct snd_soc_codec *codec = xfer->codec; |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| u32 *out32 = xfer->t.rx_buf; |
| int i; |
| |
| if (xfer->m.status != 0) { |
| dev_err(codec->dev, "SPI transfer failed: %d\n", |
| xfer->m.status); |
| wm0010_mark_boot_failure(wm0010); |
| if (xfer->done) |
| complete(xfer->done); |
| return; |
| } |
| |
| for (i = 0; i < xfer->t.len / 4; i++) { |
| dev_dbg(codec->dev, "%d: %04x\n", i, out32[i]); |
| |
| switch (be32_to_cpu(out32[i])) { |
| case 0xe0e0e0e0: |
| dev_err(codec->dev, |
| "%d: ROM error reported in stage 2\n", i); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x55555555: |
| if (wm0010->state < WM0010_STAGE2) |
| break; |
| dev_err(codec->dev, |
| "%d: ROM bootloader running in stage 2\n", i); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0000: |
| dev_dbg(codec->dev, "Stage2 loader running\n"); |
| break; |
| |
| case 0x0fed0007: |
| dev_dbg(codec->dev, "CODE_HDR packet received\n"); |
| break; |
| |
| case 0x0fed0008: |
| dev_dbg(codec->dev, "CODE_DATA packet received\n"); |
| break; |
| |
| case 0x0fed0009: |
| dev_dbg(codec->dev, "Download complete\n"); |
| break; |
| |
| case 0x0fed000c: |
| dev_dbg(codec->dev, "Application start\n"); |
| break; |
| |
| case 0x0fed000e: |
| dev_dbg(codec->dev, "PLL packet received\n"); |
| wm0010->pll_running = true; |
| break; |
| |
| case 0x0fed0025: |
| dev_err(codec->dev, "Device reports image too long\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed002c: |
| dev_err(codec->dev, "Device reports bad SPI packet\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0031: |
| dev_err(codec->dev, "Device reports SPI read overflow\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0032: |
| dev_err(codec->dev, "Device reports SPI underclock\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0033: |
| dev_err(codec->dev, "Device reports bad header packet\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0034: |
| dev_err(codec->dev, "Device reports invalid packet type\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0035: |
| dev_err(codec->dev, "Device reports data before header error\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| case 0x0fed0038: |
| dev_err(codec->dev, "Device reports invalid PLL packet\n"); |
| break; |
| |
| case 0x0fed003a: |
| dev_err(codec->dev, "Device reports packet alignment error\n"); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| |
| default: |
| dev_err(codec->dev, "Unrecognised return 0x%x\n", |
| be32_to_cpu(out32[i])); |
| wm0010_mark_boot_failure(wm0010); |
| break; |
| } |
| |
| if (wm0010->boot_failed) |
| break; |
| } |
| |
| if (xfer->done) |
| complete(xfer->done); |
| } |
| |
| static void byte_swap_64(u64 *data_in, u64 *data_out, u32 len) |
| { |
| int i; |
| |
| for (i = 0; i < len / 8; i++) |
| data_out[i] = cpu_to_be64(le64_to_cpu(data_in[i])); |
| } |
| |
| static int wm0010_firmware_load(const char *name, struct snd_soc_codec *codec) |
| { |
| struct spi_device *spi = to_spi_device(codec->dev); |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| struct list_head xfer_list; |
| struct wm0010_boot_xfer *xfer; |
| int ret; |
| struct completion done; |
| const struct firmware *fw; |
| const struct dfw_binrec *rec; |
| const struct dfw_inforec *inforec; |
| u64 *img; |
| u8 *out, dsp; |
| u32 len, offset; |
| |
| INIT_LIST_HEAD(&xfer_list); |
| |
| ret = request_firmware(&fw, name, codec->dev); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to request application(%s): %d\n", |
| name, ret); |
| return ret; |
| } |
| |
| rec = (const struct dfw_binrec *)fw->data; |
| inforec = (const struct dfw_inforec *)rec->data; |
| offset = 0; |
| dsp = inforec->dsp_target; |
| wm0010->boot_failed = false; |
| BUG_ON(!list_empty(&xfer_list)); |
| init_completion(&done); |
| |
| /* First record should be INFO */ |
| if (rec->command != DFW_CMD_INFO) { |
| dev_err(codec->dev, "First record not INFO\r\n"); |
| ret = -EINVAL; |
| goto abort; |
| } |
| |
| if (inforec->info_version != INFO_VERSION) { |
| dev_err(codec->dev, |
| "Unsupported version (%02d) of INFO record\r\n", |
| inforec->info_version); |
| ret = -EINVAL; |
| goto abort; |
| } |
| |
| dev_dbg(codec->dev, "Version v%02d INFO record found\r\n", |
| inforec->info_version); |
| |
| /* Check it's a DSP file */ |
| if (dsp != DEVICE_ID_WM0010) { |
| dev_err(codec->dev, "Not a WM0010 firmware file.\r\n"); |
| ret = -EINVAL; |
| goto abort; |
| } |
| |
| /* Skip the info record as we don't need to send it */ |
| offset += ((rec->length) + 8); |
| rec = (void *)&rec->data[rec->length]; |
| |
| while (offset < fw->size) { |
| dev_dbg(codec->dev, |
| "Packet: command %d, data length = 0x%x\r\n", |
| rec->command, rec->length); |
| len = rec->length + 8; |
| |
| out = kzalloc(len, GFP_KERNEL); |
| if (!out) { |
| dev_err(codec->dev, |
| "Failed to allocate RX buffer\n"); |
| ret = -ENOMEM; |
| goto abort1; |
| } |
| |
| img = kzalloc(len, GFP_KERNEL); |
| if (!img) { |
| dev_err(codec->dev, |
| "Failed to allocate image buffer\n"); |
| ret = -ENOMEM; |
| goto abort1; |
| } |
| |
| byte_swap_64((u64 *)&rec->command, img, len); |
| |
| xfer = kzalloc(sizeof(*xfer), GFP_KERNEL); |
| if (!xfer) { |
| dev_err(codec->dev, "Failed to allocate xfer\n"); |
| ret = -ENOMEM; |
| goto abort1; |
| } |
| |
| xfer->codec = codec; |
| list_add_tail(&xfer->list, &xfer_list); |
| |
| spi_message_init(&xfer->m); |
| xfer->m.complete = wm0010_boot_xfer_complete; |
| xfer->m.context = xfer; |
| xfer->t.tx_buf = img; |
| xfer->t.rx_buf = out; |
| xfer->t.len = len; |
| xfer->t.bits_per_word = 8; |
| |
| if (!wm0010->pll_running) { |
| xfer->t.speed_hz = wm0010->sysclk / 6; |
| } else { |
| xfer->t.speed_hz = wm0010->max_spi_freq; |
| |
| if (wm0010->board_max_spi_speed && |
| (wm0010->board_max_spi_speed < wm0010->max_spi_freq)) |
| xfer->t.speed_hz = wm0010->board_max_spi_speed; |
| } |
| |
| /* Store max usable spi frequency for later use */ |
| wm0010->max_spi_freq = xfer->t.speed_hz; |
| |
| spi_message_add_tail(&xfer->t, &xfer->m); |
| |
| offset += ((rec->length) + 8); |
| rec = (void *)&rec->data[rec->length]; |
| |
| if (offset >= fw->size) { |
| dev_dbg(codec->dev, "All transfers scheduled\n"); |
| xfer->done = &done; |
| } |
| |
| ret = spi_async(spi, &xfer->m); |
| if (ret != 0) { |
| dev_err(codec->dev, "Write failed: %d\n", ret); |
| goto abort1; |
| } |
| |
| if (wm0010->boot_failed) { |
| dev_dbg(codec->dev, "Boot fail!\n"); |
| ret = -EINVAL; |
| goto abort1; |
| } |
| } |
| |
| wait_for_completion(&done); |
| |
| ret = 0; |
| |
| abort1: |
| while (!list_empty(&xfer_list)) { |
| xfer = list_first_entry(&xfer_list, struct wm0010_boot_xfer, |
| list); |
| kfree(xfer->t.rx_buf); |
| kfree(xfer->t.tx_buf); |
| list_del(&xfer->list); |
| kfree(xfer); |
| } |
| |
| abort: |
| release_firmware(fw); |
| return ret; |
| } |
| |
| static int wm0010_stage2_load(struct snd_soc_codec *codec) |
| { |
| struct spi_device *spi = to_spi_device(codec->dev); |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| const struct firmware *fw; |
| struct spi_message m; |
| struct spi_transfer t; |
| u32 *img; |
| u8 *out; |
| int i; |
| int ret = 0; |
| |
| ret = request_firmware(&fw, "wm0010_stage2.bin", codec->dev); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to request stage2 loader: %d\n", |
| ret); |
| return ret; |
| } |
| |
| dev_dbg(codec->dev, "Downloading %zu byte stage 2 loader\n", fw->size); |
| |
| /* Copy to local buffer first as vmalloc causes problems for dma */ |
| img = kzalloc(fw->size, GFP_KERNEL); |
| if (!img) { |
| dev_err(codec->dev, "Failed to allocate image buffer\n"); |
| ret = -ENOMEM; |
| goto abort2; |
| } |
| |
| out = kzalloc(fw->size, GFP_KERNEL); |
| if (!out) { |
| dev_err(codec->dev, "Failed to allocate output buffer\n"); |
| ret = -ENOMEM; |
| goto abort1; |
| } |
| |
| memcpy(img, &fw->data[0], fw->size); |
| |
| spi_message_init(&m); |
| memset(&t, 0, sizeof(t)); |
| t.rx_buf = out; |
| t.tx_buf = img; |
| t.len = fw->size; |
| t.bits_per_word = 8; |
| t.speed_hz = wm0010->sysclk / 10; |
| spi_message_add_tail(&t, &m); |
| |
| dev_dbg(codec->dev, "Starting initial download at %dHz\n", |
| t.speed_hz); |
| |
| ret = spi_sync(spi, &m); |
| if (ret != 0) { |
| dev_err(codec->dev, "Initial download failed: %d\n", ret); |
| goto abort; |
| } |
| |
| /* Look for errors from the boot ROM */ |
| for (i = 0; i < fw->size; i++) { |
| if (out[i] != 0x55) { |
| dev_err(codec->dev, "Boot ROM error: %x in %d\n", |
| out[i], i); |
| wm0010_mark_boot_failure(wm0010); |
| ret = -EBUSY; |
| goto abort; |
| } |
| } |
| abort: |
| kfree(out); |
| abort1: |
| kfree(img); |
| abort2: |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| static int wm0010_boot(struct snd_soc_codec *codec) |
| { |
| struct spi_device *spi = to_spi_device(codec->dev); |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| unsigned long flags; |
| int ret; |
| const struct firmware *fw; |
| struct spi_message m; |
| struct spi_transfer t; |
| struct dfw_pllrec pll_rec; |
| u32 *p, len; |
| u64 *img_swap; |
| u8 *out; |
| int i; |
| |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| if (wm0010->state != WM0010_POWER_OFF) |
| dev_warn(wm0010->dev, "DSP already powered up!\n"); |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| if (wm0010->sysclk > 26000000) { |
| dev_err(codec->dev, "Max DSP clock frequency is 26MHz\n"); |
| ret = -ECANCELED; |
| goto err; |
| } |
| |
| mutex_lock(&wm0010->lock); |
| wm0010->pll_running = false; |
| |
| dev_dbg(codec->dev, "max_spi_freq: %d\n", wm0010->max_spi_freq); |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm0010->core_supplies), |
| wm0010->core_supplies); |
| if (ret != 0) { |
| dev_err(&spi->dev, "Failed to enable core supplies: %d\n", |
| ret); |
| mutex_unlock(&wm0010->lock); |
| goto err; |
| } |
| |
| ret = regulator_enable(wm0010->dbvdd); |
| if (ret != 0) { |
| dev_err(&spi->dev, "Failed to enable DBVDD: %d\n", ret); |
| goto err_core; |
| } |
| |
| /* Release reset */ |
| gpio_set_value_cansleep(wm0010->gpio_reset, !wm0010->gpio_reset_value); |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| wm0010->state = WM0010_OUT_OF_RESET; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| /* First the bootloader */ |
| ret = request_firmware(&fw, "wm0010_stage2.bin", codec->dev); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to request stage2 loader: %d\n", |
| ret); |
| goto abort; |
| } |
| |
| if (!wait_for_completion_timeout(&wm0010->boot_completion, |
| msecs_to_jiffies(20))) |
| dev_err(codec->dev, "Failed to get interrupt from DSP\n"); |
| |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| wm0010->state = WM0010_BOOTROM; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| ret = wm0010_stage2_load(codec); |
| if (ret) |
| goto abort; |
| |
| if (!wait_for_completion_timeout(&wm0010->boot_completion, |
| msecs_to_jiffies(20))) |
| dev_err(codec->dev, "Failed to get interrupt from DSP loader.\n"); |
| |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| wm0010->state = WM0010_STAGE2; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| /* Only initialise PLL if max_spi_freq initialised */ |
| if (wm0010->max_spi_freq) { |
| |
| /* Initialise a PLL record */ |
| memset(&pll_rec, 0, sizeof(pll_rec)); |
| pll_rec.command = DFW_CMD_PLL; |
| pll_rec.length = (sizeof(pll_rec) - 8); |
| |
| /* On wm0010 only the CLKCTRL1 value is used */ |
| pll_rec.clkctrl1 = wm0010->pll_clkctrl1; |
| |
| ret = -ENOMEM; |
| len = pll_rec.length + 8; |
| out = kzalloc(len, GFP_KERNEL); |
| if (!out) { |
| dev_err(codec->dev, |
| "Failed to allocate RX buffer\n"); |
| goto abort; |
| } |
| |
| img_swap = kzalloc(len, GFP_KERNEL); |
| if (!img_swap) { |
| dev_err(codec->dev, |
| "Failed to allocate image buffer\n"); |
| goto abort; |
| } |
| |
| /* We need to re-order for 0010 */ |
| byte_swap_64((u64 *)&pll_rec, img_swap, len); |
| |
| spi_message_init(&m); |
| memset(&t, 0, sizeof(t)); |
| t.rx_buf = out; |
| t.tx_buf = img_swap; |
| t.len = len; |
| t.bits_per_word = 8; |
| t.speed_hz = wm0010->sysclk / 6; |
| spi_message_add_tail(&t, &m); |
| |
| ret = spi_sync(spi, &m); |
| if (ret != 0) { |
| dev_err(codec->dev, "First PLL write failed: %d\n", ret); |
| goto abort; |
| } |
| |
| /* Use a second send of the message to get the return status */ |
| ret = spi_sync(spi, &m); |
| if (ret != 0) { |
| dev_err(codec->dev, "Second PLL write failed: %d\n", ret); |
| goto abort; |
| } |
| |
| p = (u32 *)out; |
| |
| /* Look for PLL active code from the DSP */ |
| for (i = 0; i < len / 4; i++) { |
| if (*p == 0x0e00ed0f) { |
| dev_dbg(codec->dev, "PLL packet received\n"); |
| wm0010->pll_running = true; |
| break; |
| } |
| p++; |
| } |
| |
| kfree(img_swap); |
| kfree(out); |
| } else |
| dev_dbg(codec->dev, "Not enabling DSP PLL."); |
| |
| ret = wm0010_firmware_load("wm0010.dfw", codec); |
| |
| if (ret != 0) |
| goto abort; |
| |
| spin_lock_irqsave(&wm0010->irq_lock, flags); |
| wm0010->state = WM0010_FIRMWARE; |
| spin_unlock_irqrestore(&wm0010->irq_lock, flags); |
| |
| mutex_unlock(&wm0010->lock); |
| |
| return 0; |
| |
| abort: |
| /* Put the chip back into reset */ |
| wm0010_halt(codec); |
| mutex_unlock(&wm0010->lock); |
| return ret; |
| |
| err_core: |
| mutex_unlock(&wm0010->lock); |
| regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies), |
| wm0010->core_supplies); |
| err: |
| return ret; |
| } |
| |
| static int wm0010_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| if (codec->dapm.bias_level == SND_SOC_BIAS_PREPARE) |
| wm0010_boot(codec); |
| break; |
| case SND_SOC_BIAS_PREPARE: |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| if (codec->dapm.bias_level == SND_SOC_BIAS_PREPARE) { |
| mutex_lock(&wm0010->lock); |
| wm0010_halt(codec); |
| mutex_unlock(&wm0010->lock); |
| } |
| break; |
| case SND_SOC_BIAS_OFF: |
| break; |
| } |
| |
| codec->dapm.bias_level = level; |
| |
| return 0; |
| } |
| |
| static int wm0010_set_sysclk(struct snd_soc_codec *codec, int source, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| unsigned int i; |
| |
| wm0010->sysclk = freq; |
| |
| if (freq < pll_clock_map[ARRAY_SIZE(pll_clock_map)-1].max_sysclk) { |
| wm0010->max_spi_freq = 0; |
| } else { |
| for (i = 0; i < ARRAY_SIZE(pll_clock_map); i++) |
| if (freq >= pll_clock_map[i].max_sysclk) |
| break; |
| |
| wm0010->max_spi_freq = pll_clock_map[i].max_pll_spi_speed; |
| wm0010->pll_clkctrl1 = pll_clock_map[i].pll_clkctrl1; |
| } |
| |
| return 0; |
| } |
| |
| static int wm0010_probe(struct snd_soc_codec *codec); |
| |
| static struct snd_soc_codec_driver soc_codec_dev_wm0010 = { |
| .probe = wm0010_probe, |
| .set_bias_level = wm0010_set_bias_level, |
| .set_sysclk = wm0010_set_sysclk, |
| .idle_bias_off = true, |
| |
| .dapm_widgets = wm0010_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm0010_dapm_widgets), |
| .dapm_routes = wm0010_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(wm0010_dapm_routes), |
| }; |
| |
| #define WM0010_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) |
| #define WM0010_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ |
| SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE |\ |
| SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_driver wm0010_dai[] = { |
| { |
| .name = "wm0010-sdi1", |
| .playback = { |
| .stream_name = "SDI1 Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM0010_RATES, |
| .formats = WM0010_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "SDI1 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM0010_RATES, |
| .formats = WM0010_FORMATS, |
| }, |
| }, |
| { |
| .name = "wm0010-sdi2", |
| .playback = { |
| .stream_name = "SDI2 Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM0010_RATES, |
| .formats = WM0010_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "SDI2 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM0010_RATES, |
| .formats = WM0010_FORMATS, |
| }, |
| }, |
| }; |
| |
| static irqreturn_t wm0010_irq(int irq, void *data) |
| { |
| struct wm0010_priv *wm0010 = data; |
| |
| switch (wm0010->state) { |
| case WM0010_OUT_OF_RESET: |
| case WM0010_BOOTROM: |
| case WM0010_STAGE2: |
| spin_lock(&wm0010->irq_lock); |
| complete(&wm0010->boot_completion); |
| spin_unlock(&wm0010->irq_lock); |
| return IRQ_HANDLED; |
| default: |
| return IRQ_NONE; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static int wm0010_probe(struct snd_soc_codec *codec) |
| { |
| struct wm0010_priv *wm0010 = snd_soc_codec_get_drvdata(codec); |
| |
| wm0010->codec = codec; |
| |
| return 0; |
| } |
| |
| static int wm0010_spi_probe(struct spi_device *spi) |
| { |
| unsigned long gpio_flags; |
| int ret; |
| int trigger; |
| int irq; |
| struct wm0010_priv *wm0010; |
| |
| wm0010 = devm_kzalloc(&spi->dev, sizeof(*wm0010), |
| GFP_KERNEL); |
| if (!wm0010) |
| return -ENOMEM; |
| |
| mutex_init(&wm0010->lock); |
| spin_lock_init(&wm0010->irq_lock); |
| |
| spi_set_drvdata(spi, wm0010); |
| wm0010->dev = &spi->dev; |
| |
| if (dev_get_platdata(&spi->dev)) |
| memcpy(&wm0010->pdata, dev_get_platdata(&spi->dev), |
| sizeof(wm0010->pdata)); |
| |
| init_completion(&wm0010->boot_completion); |
| |
| wm0010->core_supplies[0].supply = "AVDD"; |
| wm0010->core_supplies[1].supply = "DCVDD"; |
| ret = devm_regulator_bulk_get(wm0010->dev, ARRAY_SIZE(wm0010->core_supplies), |
| wm0010->core_supplies); |
| if (ret != 0) { |
| dev_err(wm0010->dev, "Failed to obtain core supplies: %d\n", |
| ret); |
| return ret; |
| } |
| |
| wm0010->dbvdd = devm_regulator_get(wm0010->dev, "DBVDD"); |
| if (IS_ERR(wm0010->dbvdd)) { |
| ret = PTR_ERR(wm0010->dbvdd); |
| dev_err(wm0010->dev, "Failed to obtain DBVDD: %d\n", ret); |
| return ret; |
| } |
| |
| if (wm0010->pdata.gpio_reset) { |
| wm0010->gpio_reset = wm0010->pdata.gpio_reset; |
| |
| if (wm0010->pdata.reset_active_high) |
| wm0010->gpio_reset_value = 1; |
| else |
| wm0010->gpio_reset_value = 0; |
| |
| if (wm0010->gpio_reset_value) |
| gpio_flags = GPIOF_OUT_INIT_HIGH; |
| else |
| gpio_flags = GPIOF_OUT_INIT_LOW; |
| |
| ret = devm_gpio_request_one(wm0010->dev, wm0010->gpio_reset, |
| gpio_flags, "wm0010 reset"); |
| if (ret < 0) { |
| dev_err(wm0010->dev, |
| "Failed to request GPIO for DSP reset: %d\n", |
| ret); |
| return ret; |
| } |
| } else { |
| dev_err(wm0010->dev, "No reset GPIO configured\n"); |
| return -EINVAL; |
| } |
| |
| wm0010->state = WM0010_POWER_OFF; |
| |
| irq = spi->irq; |
| if (wm0010->pdata.irq_flags) |
| trigger = wm0010->pdata.irq_flags; |
| else |
| trigger = IRQF_TRIGGER_FALLING; |
| trigger |= IRQF_ONESHOT; |
| |
| ret = request_threaded_irq(irq, NULL, wm0010_irq, trigger | IRQF_ONESHOT, |
| "wm0010", wm0010); |
| if (ret) { |
| dev_err(wm0010->dev, "Failed to request IRQ %d: %d\n", |
| irq, ret); |
| return ret; |
| } |
| wm0010->irq = irq; |
| |
| if (spi->max_speed_hz) |
| wm0010->board_max_spi_speed = spi->max_speed_hz; |
| else |
| wm0010->board_max_spi_speed = 0; |
| |
| ret = snd_soc_register_codec(&spi->dev, |
| &soc_codec_dev_wm0010, wm0010_dai, |
| ARRAY_SIZE(wm0010_dai)); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int wm0010_spi_remove(struct spi_device *spi) |
| { |
| struct wm0010_priv *wm0010 = spi_get_drvdata(spi); |
| |
| snd_soc_unregister_codec(&spi->dev); |
| |
| gpio_set_value_cansleep(wm0010->gpio_reset, |
| wm0010->gpio_reset_value); |
| |
| if (wm0010->irq) |
| free_irq(wm0010->irq, wm0010); |
| |
| return 0; |
| } |
| |
| static struct spi_driver wm0010_spi_driver = { |
| .driver = { |
| .name = "wm0010", |
| .bus = &spi_bus_type, |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm0010_spi_probe, |
| .remove = wm0010_spi_remove, |
| }; |
| |
| module_spi_driver(wm0010_spi_driver); |
| |
| MODULE_DESCRIPTION("ASoC WM0010 driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |