| /* |
| * Copyright © 2008 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * |
| */ |
| |
| #include "drmP.h" |
| #include "drm.h" |
| #include "i915_drm.h" |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| #include <linux/slab.h> |
| #include <linux/swap.h> |
| #include <linux/pci.h> |
| #include <linux/intel-gtt.h> |
| |
| static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj); |
| |
| static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj, |
| bool pipelined); |
| static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); |
| static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); |
| static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, |
| int write); |
| static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, |
| uint64_t offset, |
| uint64_t size); |
| static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); |
| static int i915_gem_object_wait_rendering(struct drm_gem_object *obj, |
| bool interruptible); |
| static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, |
| unsigned alignment, bool mappable); |
| static void i915_gem_clear_fence_reg(struct drm_gem_object *obj); |
| static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv); |
| static void i915_gem_free_object_tail(struct drm_gem_object *obj); |
| |
| static int |
| i915_gem_object_get_pages(struct drm_gem_object *obj, |
| gfp_t gfpmask); |
| |
| static void |
| i915_gem_object_put_pages(struct drm_gem_object *obj); |
| |
| static int i915_gem_inactive_shrink(struct shrinker *shrinker, |
| int nr_to_scan, |
| gfp_t gfp_mask); |
| |
| |
| /* some bookkeeping */ |
| static void i915_gem_info_add_obj(struct drm_i915_private *dev_priv, |
| size_t size) |
| { |
| dev_priv->mm.object_count++; |
| dev_priv->mm.object_memory += size; |
| } |
| |
| static void i915_gem_info_remove_obj(struct drm_i915_private *dev_priv, |
| size_t size) |
| { |
| dev_priv->mm.object_count--; |
| dev_priv->mm.object_memory -= size; |
| } |
| |
| static void i915_gem_info_add_gtt(struct drm_i915_private *dev_priv, |
| struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| dev_priv->mm.gtt_count++; |
| dev_priv->mm.gtt_memory += obj->size; |
| if (obj_priv->gtt_offset < dev_priv->mm.gtt_mappable_end) { |
| dev_priv->mm.mappable_gtt_used += |
| min_t(size_t, obj->size, |
| dev_priv->mm.gtt_mappable_end |
| - obj_priv->gtt_offset); |
| } |
| } |
| |
| static void i915_gem_info_remove_gtt(struct drm_i915_private *dev_priv, |
| struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| dev_priv->mm.gtt_count--; |
| dev_priv->mm.gtt_memory -= obj->size; |
| if (obj_priv->gtt_offset < dev_priv->mm.gtt_mappable_end) { |
| dev_priv->mm.mappable_gtt_used -= |
| min_t(size_t, obj->size, |
| dev_priv->mm.gtt_mappable_end |
| - obj_priv->gtt_offset); |
| } |
| } |
| |
| /** |
| * Update the mappable working set counters. Call _only_ when there is a change |
| * in one of (pin|fault)_mappable and update *_mappable _before_ calling. |
| * @mappable: new state the changed mappable flag (either pin_ or fault_). |
| */ |
| static void |
| i915_gem_info_update_mappable(struct drm_i915_private *dev_priv, |
| struct drm_gem_object *obj, |
| bool mappable) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| if (mappable) { |
| if (obj_priv->pin_mappable && obj_priv->fault_mappable) |
| /* Combined state was already mappable. */ |
| return; |
| dev_priv->mm.gtt_mappable_count++; |
| dev_priv->mm.gtt_mappable_memory += obj->size; |
| } else { |
| if (obj_priv->pin_mappable || obj_priv->fault_mappable) |
| /* Combined state still mappable. */ |
| return; |
| dev_priv->mm.gtt_mappable_count--; |
| dev_priv->mm.gtt_mappable_memory -= obj->size; |
| } |
| } |
| |
| static void i915_gem_info_add_pin(struct drm_i915_private *dev_priv, |
| struct drm_gem_object *obj, |
| bool mappable) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| dev_priv->mm.pin_count++; |
| dev_priv->mm.pin_memory += obj->size; |
| if (mappable) { |
| obj_priv->pin_mappable = true; |
| i915_gem_info_update_mappable(dev_priv, obj, true); |
| } |
| } |
| |
| static void i915_gem_info_remove_pin(struct drm_i915_private *dev_priv, |
| struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| dev_priv->mm.pin_count--; |
| dev_priv->mm.pin_memory -= obj->size; |
| if (obj_priv->pin_mappable) { |
| obj_priv->pin_mappable = false; |
| i915_gem_info_update_mappable(dev_priv, obj, false); |
| } |
| } |
| |
| int |
| i915_gem_check_is_wedged(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct completion *x = &dev_priv->error_completion; |
| unsigned long flags; |
| int ret; |
| |
| if (!atomic_read(&dev_priv->mm.wedged)) |
| return 0; |
| |
| ret = wait_for_completion_interruptible(x); |
| if (ret) |
| return ret; |
| |
| /* Success, we reset the GPU! */ |
| if (!atomic_read(&dev_priv->mm.wedged)) |
| return 0; |
| |
| /* GPU is hung, bump the completion count to account for |
| * the token we just consumed so that we never hit zero and |
| * end up waiting upon a subsequent completion event that |
| * will never happen. |
| */ |
| spin_lock_irqsave(&x->wait.lock, flags); |
| x->done++; |
| spin_unlock_irqrestore(&x->wait.lock, flags); |
| return -EIO; |
| } |
| |
| static int i915_mutex_lock_interruptible(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| ret = i915_gem_check_is_wedged(dev); |
| if (ret) |
| return ret; |
| |
| ret = mutex_lock_interruptible(&dev->struct_mutex); |
| if (ret) |
| return ret; |
| |
| if (atomic_read(&dev_priv->mm.wedged)) { |
| mutex_unlock(&dev->struct_mutex); |
| return -EAGAIN; |
| } |
| |
| WARN_ON(i915_verify_lists(dev)); |
| return 0; |
| } |
| |
| static inline bool |
| i915_gem_object_is_inactive(struct drm_i915_gem_object *obj_priv) |
| { |
| return obj_priv->gtt_space && |
| !obj_priv->active && |
| obj_priv->pin_count == 0; |
| } |
| |
| int i915_gem_do_init(struct drm_device *dev, |
| unsigned long start, |
| unsigned long mappable_end, |
| unsigned long end) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (start >= end || |
| (start & (PAGE_SIZE - 1)) != 0 || |
| (end & (PAGE_SIZE - 1)) != 0) { |
| return -EINVAL; |
| } |
| |
| drm_mm_init(&dev_priv->mm.gtt_space, start, |
| end - start); |
| |
| dev_priv->mm.gtt_total = end - start; |
| dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start; |
| dev_priv->mm.gtt_mappable_end = mappable_end; |
| |
| return 0; |
| } |
| |
| int |
| i915_gem_init_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_init *args = data; |
| int ret; |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_gem_do_init(dev, args->gtt_start, args->gtt_end, args->gtt_end); |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| int |
| i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_get_aperture *args = data; |
| |
| if (!(dev->driver->driver_features & DRIVER_GEM)) |
| return -ENODEV; |
| |
| mutex_lock(&dev->struct_mutex); |
| args->aper_size = dev_priv->mm.gtt_total; |
| args->aper_available_size = args->aper_size - dev_priv->mm.pin_memory; |
| mutex_unlock(&dev->struct_mutex); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * Creates a new mm object and returns a handle to it. |
| */ |
| int |
| i915_gem_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_create *args = data; |
| struct drm_gem_object *obj; |
| int ret; |
| u32 handle; |
| |
| args->size = roundup(args->size, PAGE_SIZE); |
| |
| /* Allocate the new object */ |
| obj = i915_gem_alloc_object(dev, args->size); |
| if (obj == NULL) |
| return -ENOMEM; |
| |
| ret = drm_gem_handle_create(file_priv, obj, &handle); |
| if (ret) { |
| drm_gem_object_release(obj); |
| i915_gem_info_remove_obj(dev->dev_private, obj->size); |
| kfree(obj); |
| return ret; |
| } |
| |
| /* drop reference from allocate - handle holds it now */ |
| drm_gem_object_unreference(obj); |
| trace_i915_gem_object_create(obj); |
| |
| args->handle = handle; |
| return 0; |
| } |
| |
| static bool |
| i915_gem_object_cpu_accessible(struct drm_i915_gem_object *obj) |
| { |
| struct drm_device *dev = obj->base.dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| return obj->gtt_space == NULL || |
| obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end; |
| } |
| |
| static inline int |
| fast_shmem_read(struct page **pages, |
| loff_t page_base, int page_offset, |
| char __user *data, |
| int length) |
| { |
| char *vaddr; |
| int ret; |
| |
| vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT]); |
| ret = __copy_to_user_inatomic(data, vaddr + page_offset, length); |
| kunmap_atomic(vaddr); |
| |
| return ret; |
| } |
| |
| static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj) |
| { |
| drm_i915_private_t *dev_priv = obj->dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 && |
| obj_priv->tiling_mode != I915_TILING_NONE; |
| } |
| |
| static inline void |
| slow_shmem_copy(struct page *dst_page, |
| int dst_offset, |
| struct page *src_page, |
| int src_offset, |
| int length) |
| { |
| char *dst_vaddr, *src_vaddr; |
| |
| dst_vaddr = kmap(dst_page); |
| src_vaddr = kmap(src_page); |
| |
| memcpy(dst_vaddr + dst_offset, src_vaddr + src_offset, length); |
| |
| kunmap(src_page); |
| kunmap(dst_page); |
| } |
| |
| static inline void |
| slow_shmem_bit17_copy(struct page *gpu_page, |
| int gpu_offset, |
| struct page *cpu_page, |
| int cpu_offset, |
| int length, |
| int is_read) |
| { |
| char *gpu_vaddr, *cpu_vaddr; |
| |
| /* Use the unswizzled path if this page isn't affected. */ |
| if ((page_to_phys(gpu_page) & (1 << 17)) == 0) { |
| if (is_read) |
| return slow_shmem_copy(cpu_page, cpu_offset, |
| gpu_page, gpu_offset, length); |
| else |
| return slow_shmem_copy(gpu_page, gpu_offset, |
| cpu_page, cpu_offset, length); |
| } |
| |
| gpu_vaddr = kmap(gpu_page); |
| cpu_vaddr = kmap(cpu_page); |
| |
| /* Copy the data, XORing A6 with A17 (1). The user already knows he's |
| * XORing with the other bits (A9 for Y, A9 and A10 for X) |
| */ |
| while (length > 0) { |
| int cacheline_end = ALIGN(gpu_offset + 1, 64); |
| int this_length = min(cacheline_end - gpu_offset, length); |
| int swizzled_gpu_offset = gpu_offset ^ 64; |
| |
| if (is_read) { |
| memcpy(cpu_vaddr + cpu_offset, |
| gpu_vaddr + swizzled_gpu_offset, |
| this_length); |
| } else { |
| memcpy(gpu_vaddr + swizzled_gpu_offset, |
| cpu_vaddr + cpu_offset, |
| this_length); |
| } |
| cpu_offset += this_length; |
| gpu_offset += this_length; |
| length -= this_length; |
| } |
| |
| kunmap(cpu_page); |
| kunmap(gpu_page); |
| } |
| |
| /** |
| * This is the fast shmem pread path, which attempts to copy_from_user directly |
| * from the backing pages of the object to the user's address space. On a |
| * fault, it fails so we can fall back to i915_gem_shmem_pwrite_slow(). |
| */ |
| static int |
| i915_gem_shmem_pread_fast(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pread *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| ssize_t remain; |
| loff_t offset, page_base; |
| char __user *user_data; |
| int page_offset, page_length; |
| |
| user_data = (char __user *) (uintptr_t) args->data_ptr; |
| remain = args->size; |
| |
| obj_priv = to_intel_bo(obj); |
| offset = args->offset; |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * page_base = page offset within aperture |
| * page_offset = offset within page |
| * page_length = bytes to copy for this page |
| */ |
| page_base = (offset & ~(PAGE_SIZE-1)); |
| page_offset = offset & (PAGE_SIZE-1); |
| page_length = remain; |
| if ((page_offset + remain) > PAGE_SIZE) |
| page_length = PAGE_SIZE - page_offset; |
| |
| if (fast_shmem_read(obj_priv->pages, |
| page_base, page_offset, |
| user_data, page_length)) |
| return -EFAULT; |
| |
| remain -= page_length; |
| user_data += page_length; |
| offset += page_length; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj) |
| { |
| int ret; |
| |
| ret = i915_gem_object_get_pages(obj, __GFP_NORETRY | __GFP_NOWARN); |
| |
| /* If we've insufficient memory to map in the pages, attempt |
| * to make some space by throwing out some old buffers. |
| */ |
| if (ret == -ENOMEM) { |
| struct drm_device *dev = obj->dev; |
| |
| ret = i915_gem_evict_something(dev, obj->size, |
| i915_gem_get_gtt_alignment(obj), |
| false); |
| if (ret) |
| return ret; |
| |
| ret = i915_gem_object_get_pages(obj, 0); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * This is the fallback shmem pread path, which allocates temporary storage |
| * in kernel space to copy_to_user into outside of the struct_mutex, so we |
| * can copy out of the object's backing pages while holding the struct mutex |
| * and not take page faults. |
| */ |
| static int |
| i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pread *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct mm_struct *mm = current->mm; |
| struct page **user_pages; |
| ssize_t remain; |
| loff_t offset, pinned_pages, i; |
| loff_t first_data_page, last_data_page, num_pages; |
| int shmem_page_index, shmem_page_offset; |
| int data_page_index, data_page_offset; |
| int page_length; |
| int ret; |
| uint64_t data_ptr = args->data_ptr; |
| int do_bit17_swizzling; |
| |
| remain = args->size; |
| |
| /* Pin the user pages containing the data. We can't fault while |
| * holding the struct mutex, yet we want to hold it while |
| * dereferencing the user data. |
| */ |
| first_data_page = data_ptr / PAGE_SIZE; |
| last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; |
| num_pages = last_data_page - first_data_page + 1; |
| |
| user_pages = drm_malloc_ab(num_pages, sizeof(struct page *)); |
| if (user_pages == NULL) |
| return -ENOMEM; |
| |
| mutex_unlock(&dev->struct_mutex); |
| down_read(&mm->mmap_sem); |
| pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, |
| num_pages, 1, 0, user_pages, NULL); |
| up_read(&mm->mmap_sem); |
| mutex_lock(&dev->struct_mutex); |
| if (pinned_pages < num_pages) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = i915_gem_object_set_cpu_read_domain_range(obj, |
| args->offset, |
| args->size); |
| if (ret) |
| goto out; |
| |
| do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); |
| |
| obj_priv = to_intel_bo(obj); |
| offset = args->offset; |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * shmem_page_index = page number within shmem file |
| * shmem_page_offset = offset within page in shmem file |
| * data_page_index = page number in get_user_pages return |
| * data_page_offset = offset with data_page_index page. |
| * page_length = bytes to copy for this page |
| */ |
| shmem_page_index = offset / PAGE_SIZE; |
| shmem_page_offset = offset & ~PAGE_MASK; |
| data_page_index = data_ptr / PAGE_SIZE - first_data_page; |
| data_page_offset = data_ptr & ~PAGE_MASK; |
| |
| page_length = remain; |
| if ((shmem_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - shmem_page_offset; |
| if ((data_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - data_page_offset; |
| |
| if (do_bit17_swizzling) { |
| slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index], |
| shmem_page_offset, |
| user_pages[data_page_index], |
| data_page_offset, |
| page_length, |
| 1); |
| } else { |
| slow_shmem_copy(user_pages[data_page_index], |
| data_page_offset, |
| obj_priv->pages[shmem_page_index], |
| shmem_page_offset, |
| page_length); |
| } |
| |
| remain -= page_length; |
| data_ptr += page_length; |
| offset += page_length; |
| } |
| |
| out: |
| for (i = 0; i < pinned_pages; i++) { |
| SetPageDirty(user_pages[i]); |
| page_cache_release(user_pages[i]); |
| } |
| drm_free_large(user_pages); |
| |
| return ret; |
| } |
| |
| /** |
| * Reads data from the object referenced by handle. |
| * |
| * On error, the contents of *data are undefined. |
| */ |
| int |
| i915_gem_pread_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_pread *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret = 0; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| /* Bounds check source. */ |
| if (args->offset > obj->size || args->size > obj->size - args->offset) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (args->size == 0) |
| goto out; |
| |
| if (!access_ok(VERIFY_WRITE, |
| (char __user *)(uintptr_t)args->data_ptr, |
| args->size)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr, |
| args->size); |
| if (ret) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = i915_gem_object_get_pages_or_evict(obj); |
| if (ret) |
| goto out; |
| |
| ret = i915_gem_object_set_cpu_read_domain_range(obj, |
| args->offset, |
| args->size); |
| if (ret) |
| goto out_put; |
| |
| ret = -EFAULT; |
| if (!i915_gem_object_needs_bit17_swizzle(obj)) |
| ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv); |
| if (ret == -EFAULT) |
| ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv); |
| |
| out_put: |
| i915_gem_object_put_pages(obj); |
| out: |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /* This is the fast write path which cannot handle |
| * page faults in the source data |
| */ |
| |
| static inline int |
| fast_user_write(struct io_mapping *mapping, |
| loff_t page_base, int page_offset, |
| char __user *user_data, |
| int length) |
| { |
| char *vaddr_atomic; |
| unsigned long unwritten; |
| |
| vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base); |
| unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset, |
| user_data, length); |
| io_mapping_unmap_atomic(vaddr_atomic); |
| return unwritten; |
| } |
| |
| /* Here's the write path which can sleep for |
| * page faults |
| */ |
| |
| static inline void |
| slow_kernel_write(struct io_mapping *mapping, |
| loff_t gtt_base, int gtt_offset, |
| struct page *user_page, int user_offset, |
| int length) |
| { |
| char __iomem *dst_vaddr; |
| char *src_vaddr; |
| |
| dst_vaddr = io_mapping_map_wc(mapping, gtt_base); |
| src_vaddr = kmap(user_page); |
| |
| memcpy_toio(dst_vaddr + gtt_offset, |
| src_vaddr + user_offset, |
| length); |
| |
| kunmap(user_page); |
| io_mapping_unmap(dst_vaddr); |
| } |
| |
| static inline int |
| fast_shmem_write(struct page **pages, |
| loff_t page_base, int page_offset, |
| char __user *data, |
| int length) |
| { |
| char *vaddr; |
| int ret; |
| |
| vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT]); |
| ret = __copy_from_user_inatomic(vaddr + page_offset, data, length); |
| kunmap_atomic(vaddr); |
| |
| return ret; |
| } |
| |
| /** |
| * This is the fast pwrite path, where we copy the data directly from the |
| * user into the GTT, uncached. |
| */ |
| static int |
| i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| ssize_t remain; |
| loff_t offset, page_base; |
| char __user *user_data; |
| int page_offset, page_length; |
| |
| user_data = (char __user *) (uintptr_t) args->data_ptr; |
| remain = args->size; |
| |
| obj_priv = to_intel_bo(obj); |
| offset = obj_priv->gtt_offset + args->offset; |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * page_base = page offset within aperture |
| * page_offset = offset within page |
| * page_length = bytes to copy for this page |
| */ |
| page_base = (offset & ~(PAGE_SIZE-1)); |
| page_offset = offset & (PAGE_SIZE-1); |
| page_length = remain; |
| if ((page_offset + remain) > PAGE_SIZE) |
| page_length = PAGE_SIZE - page_offset; |
| |
| /* If we get a fault while copying data, then (presumably) our |
| * source page isn't available. Return the error and we'll |
| * retry in the slow path. |
| */ |
| if (fast_user_write(dev_priv->mm.gtt_mapping, page_base, |
| page_offset, user_data, page_length)) |
| |
| return -EFAULT; |
| |
| remain -= page_length; |
| user_data += page_length; |
| offset += page_length; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * This is the fallback GTT pwrite path, which uses get_user_pages to pin |
| * the memory and maps it using kmap_atomic for copying. |
| * |
| * This code resulted in x11perf -rgb10text consuming about 10% more CPU |
| * than using i915_gem_gtt_pwrite_fast on a G45 (32-bit). |
| */ |
| static int |
| i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| ssize_t remain; |
| loff_t gtt_page_base, offset; |
| loff_t first_data_page, last_data_page, num_pages; |
| loff_t pinned_pages, i; |
| struct page **user_pages; |
| struct mm_struct *mm = current->mm; |
| int gtt_page_offset, data_page_offset, data_page_index, page_length; |
| int ret; |
| uint64_t data_ptr = args->data_ptr; |
| |
| remain = args->size; |
| |
| /* Pin the user pages containing the data. We can't fault while |
| * holding the struct mutex, and all of the pwrite implementations |
| * want to hold it while dereferencing the user data. |
| */ |
| first_data_page = data_ptr / PAGE_SIZE; |
| last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; |
| num_pages = last_data_page - first_data_page + 1; |
| |
| user_pages = drm_malloc_ab(num_pages, sizeof(struct page *)); |
| if (user_pages == NULL) |
| return -ENOMEM; |
| |
| mutex_unlock(&dev->struct_mutex); |
| down_read(&mm->mmap_sem); |
| pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, |
| num_pages, 0, 0, user_pages, NULL); |
| up_read(&mm->mmap_sem); |
| mutex_lock(&dev->struct_mutex); |
| if (pinned_pages < num_pages) { |
| ret = -EFAULT; |
| goto out_unpin_pages; |
| } |
| |
| ret = i915_gem_object_set_to_gtt_domain(obj, 1); |
| if (ret) |
| goto out_unpin_pages; |
| |
| obj_priv = to_intel_bo(obj); |
| offset = obj_priv->gtt_offset + args->offset; |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * gtt_page_base = page offset within aperture |
| * gtt_page_offset = offset within page in aperture |
| * data_page_index = page number in get_user_pages return |
| * data_page_offset = offset with data_page_index page. |
| * page_length = bytes to copy for this page |
| */ |
| gtt_page_base = offset & PAGE_MASK; |
| gtt_page_offset = offset & ~PAGE_MASK; |
| data_page_index = data_ptr / PAGE_SIZE - first_data_page; |
| data_page_offset = data_ptr & ~PAGE_MASK; |
| |
| page_length = remain; |
| if ((gtt_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - gtt_page_offset; |
| if ((data_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - data_page_offset; |
| |
| slow_kernel_write(dev_priv->mm.gtt_mapping, |
| gtt_page_base, gtt_page_offset, |
| user_pages[data_page_index], |
| data_page_offset, |
| page_length); |
| |
| remain -= page_length; |
| offset += page_length; |
| data_ptr += page_length; |
| } |
| |
| out_unpin_pages: |
| for (i = 0; i < pinned_pages; i++) |
| page_cache_release(user_pages[i]); |
| drm_free_large(user_pages); |
| |
| return ret; |
| } |
| |
| /** |
| * This is the fast shmem pwrite path, which attempts to directly |
| * copy_from_user into the kmapped pages backing the object. |
| */ |
| static int |
| i915_gem_shmem_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| ssize_t remain; |
| loff_t offset, page_base; |
| char __user *user_data; |
| int page_offset, page_length; |
| |
| user_data = (char __user *) (uintptr_t) args->data_ptr; |
| remain = args->size; |
| |
| obj_priv = to_intel_bo(obj); |
| offset = args->offset; |
| obj_priv->dirty = 1; |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * page_base = page offset within aperture |
| * page_offset = offset within page |
| * page_length = bytes to copy for this page |
| */ |
| page_base = (offset & ~(PAGE_SIZE-1)); |
| page_offset = offset & (PAGE_SIZE-1); |
| page_length = remain; |
| if ((page_offset + remain) > PAGE_SIZE) |
| page_length = PAGE_SIZE - page_offset; |
| |
| if (fast_shmem_write(obj_priv->pages, |
| page_base, page_offset, |
| user_data, page_length)) |
| return -EFAULT; |
| |
| remain -= page_length; |
| user_data += page_length; |
| offset += page_length; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * This is the fallback shmem pwrite path, which uses get_user_pages to pin |
| * the memory and maps it using kmap_atomic for copying. |
| * |
| * This avoids taking mmap_sem for faulting on the user's address while the |
| * struct_mutex is held. |
| */ |
| static int |
| i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct mm_struct *mm = current->mm; |
| struct page **user_pages; |
| ssize_t remain; |
| loff_t offset, pinned_pages, i; |
| loff_t first_data_page, last_data_page, num_pages; |
| int shmem_page_index, shmem_page_offset; |
| int data_page_index, data_page_offset; |
| int page_length; |
| int ret; |
| uint64_t data_ptr = args->data_ptr; |
| int do_bit17_swizzling; |
| |
| remain = args->size; |
| |
| /* Pin the user pages containing the data. We can't fault while |
| * holding the struct mutex, and all of the pwrite implementations |
| * want to hold it while dereferencing the user data. |
| */ |
| first_data_page = data_ptr / PAGE_SIZE; |
| last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; |
| num_pages = last_data_page - first_data_page + 1; |
| |
| user_pages = drm_malloc_ab(num_pages, sizeof(struct page *)); |
| if (user_pages == NULL) |
| return -ENOMEM; |
| |
| mutex_unlock(&dev->struct_mutex); |
| down_read(&mm->mmap_sem); |
| pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, |
| num_pages, 0, 0, user_pages, NULL); |
| up_read(&mm->mmap_sem); |
| mutex_lock(&dev->struct_mutex); |
| if (pinned_pages < num_pages) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = i915_gem_object_set_to_cpu_domain(obj, 1); |
| if (ret) |
| goto out; |
| |
| do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); |
| |
| obj_priv = to_intel_bo(obj); |
| offset = args->offset; |
| obj_priv->dirty = 1; |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * shmem_page_index = page number within shmem file |
| * shmem_page_offset = offset within page in shmem file |
| * data_page_index = page number in get_user_pages return |
| * data_page_offset = offset with data_page_index page. |
| * page_length = bytes to copy for this page |
| */ |
| shmem_page_index = offset / PAGE_SIZE; |
| shmem_page_offset = offset & ~PAGE_MASK; |
| data_page_index = data_ptr / PAGE_SIZE - first_data_page; |
| data_page_offset = data_ptr & ~PAGE_MASK; |
| |
| page_length = remain; |
| if ((shmem_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - shmem_page_offset; |
| if ((data_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - data_page_offset; |
| |
| if (do_bit17_swizzling) { |
| slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index], |
| shmem_page_offset, |
| user_pages[data_page_index], |
| data_page_offset, |
| page_length, |
| 0); |
| } else { |
| slow_shmem_copy(obj_priv->pages[shmem_page_index], |
| shmem_page_offset, |
| user_pages[data_page_index], |
| data_page_offset, |
| page_length); |
| } |
| |
| remain -= page_length; |
| data_ptr += page_length; |
| offset += page_length; |
| } |
| |
| out: |
| for (i = 0; i < pinned_pages; i++) |
| page_cache_release(user_pages[i]); |
| drm_free_large(user_pages); |
| |
| return ret; |
| } |
| |
| /** |
| * Writes data to the object referenced by handle. |
| * |
| * On error, the contents of the buffer that were to be modified are undefined. |
| */ |
| int |
| i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_pwrite *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret = 0; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| |
| /* Bounds check destination. */ |
| if (args->offset > obj->size || args->size > obj->size - args->offset) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (args->size == 0) |
| goto out; |
| |
| if (!access_ok(VERIFY_READ, |
| (char __user *)(uintptr_t)args->data_ptr, |
| args->size)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr, |
| args->size); |
| if (ret) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| /* We can only do the GTT pwrite on untiled buffers, as otherwise |
| * it would end up going through the fenced access, and we'll get |
| * different detiling behavior between reading and writing. |
| * pread/pwrite currently are reading and writing from the CPU |
| * perspective, requiring manual detiling by the client. |
| */ |
| if (obj_priv->phys_obj) |
| ret = i915_gem_phys_pwrite(dev, obj, args, file); |
| else if (obj_priv->tiling_mode == I915_TILING_NONE && |
| obj_priv->gtt_space && |
| obj->write_domain != I915_GEM_DOMAIN_CPU) { |
| ret = i915_gem_object_pin(obj, 0, true); |
| if (ret) |
| goto out; |
| |
| ret = i915_gem_object_set_to_gtt_domain(obj, 1); |
| if (ret) |
| goto out_unpin; |
| |
| ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file); |
| if (ret == -EFAULT) |
| ret = i915_gem_gtt_pwrite_slow(dev, obj, args, file); |
| |
| out_unpin: |
| i915_gem_object_unpin(obj); |
| } else { |
| ret = i915_gem_object_get_pages_or_evict(obj); |
| if (ret) |
| goto out; |
| |
| ret = i915_gem_object_set_to_cpu_domain(obj, 1); |
| if (ret) |
| goto out_put; |
| |
| ret = -EFAULT; |
| if (!i915_gem_object_needs_bit17_swizzle(obj)) |
| ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file); |
| if (ret == -EFAULT) |
| ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file); |
| |
| out_put: |
| i915_gem_object_put_pages(obj); |
| } |
| |
| out: |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /** |
| * Called when user space prepares to use an object with the CPU, either |
| * through the mmap ioctl's mapping or a GTT mapping. |
| */ |
| int |
| i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_set_domain *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| uint32_t read_domains = args->read_domains; |
| uint32_t write_domain = args->write_domain; |
| int ret; |
| |
| if (!(dev->driver->driver_features & DRIVER_GEM)) |
| return -ENODEV; |
| |
| /* Only handle setting domains to types used by the CPU. */ |
| if (write_domain & I915_GEM_GPU_DOMAINS) |
| return -EINVAL; |
| |
| if (read_domains & I915_GEM_GPU_DOMAINS) |
| return -EINVAL; |
| |
| /* Having something in the write domain implies it's in the read |
| * domain, and only that read domain. Enforce that in the request. |
| */ |
| if (write_domain != 0 && read_domains != write_domain) |
| return -EINVAL; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| intel_mark_busy(dev, obj); |
| |
| if (read_domains & I915_GEM_DOMAIN_GTT) { |
| ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); |
| |
| /* Update the LRU on the fence for the CPU access that's |
| * about to occur. |
| */ |
| if (obj_priv->fence_reg != I915_FENCE_REG_NONE) { |
| struct drm_i915_fence_reg *reg = |
| &dev_priv->fence_regs[obj_priv->fence_reg]; |
| list_move_tail(®->lru_list, |
| &dev_priv->mm.fence_list); |
| } |
| |
| /* Silently promote "you're not bound, there was nothing to do" |
| * to success, since the client was just asking us to |
| * make sure everything was done. |
| */ |
| if (ret == -EINVAL) |
| ret = 0; |
| } else { |
| ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); |
| } |
| |
| /* Maintain LRU order of "inactive" objects */ |
| if (ret == 0 && i915_gem_object_is_inactive(obj_priv)) |
| list_move_tail(&obj_priv->mm_list, &dev_priv->mm.inactive_list); |
| |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /** |
| * Called when user space has done writes to this buffer |
| */ |
| int |
| i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_sw_finish *args = data; |
| struct drm_gem_object *obj; |
| int ret = 0; |
| |
| if (!(dev->driver->driver_features & DRIVER_GEM)) |
| return -ENODEV; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| /* Pinned buffers may be scanout, so flush the cache */ |
| if (to_intel_bo(obj)->pin_count) |
| i915_gem_object_flush_cpu_write_domain(obj); |
| |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /** |
| * Maps the contents of an object, returning the address it is mapped |
| * into. |
| * |
| * While the mapping holds a reference on the contents of the object, it doesn't |
| * imply a ref on the object itself. |
| */ |
| int |
| i915_gem_mmap_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_mmap *args = data; |
| struct drm_gem_object *obj; |
| loff_t offset; |
| unsigned long addr; |
| |
| if (!(dev->driver->driver_features & DRIVER_GEM)) |
| return -ENODEV; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) |
| return -ENOENT; |
| |
| if (obj->size > dev_priv->mm.gtt_mappable_end) { |
| drm_gem_object_unreference_unlocked(obj); |
| return -E2BIG; |
| } |
| |
| offset = args->offset; |
| |
| down_write(¤t->mm->mmap_sem); |
| addr = do_mmap(obj->filp, 0, args->size, |
| PROT_READ | PROT_WRITE, MAP_SHARED, |
| args->offset); |
| up_write(¤t->mm->mmap_sem); |
| drm_gem_object_unreference_unlocked(obj); |
| if (IS_ERR((void *)addr)) |
| return addr; |
| |
| args->addr_ptr = (uint64_t) addr; |
| |
| return 0; |
| } |
| |
| /** |
| * i915_gem_fault - fault a page into the GTT |
| * vma: VMA in question |
| * vmf: fault info |
| * |
| * The fault handler is set up by drm_gem_mmap() when a object is GTT mapped |
| * from userspace. The fault handler takes care of binding the object to |
| * the GTT (if needed), allocating and programming a fence register (again, |
| * only if needed based on whether the old reg is still valid or the object |
| * is tiled) and inserting a new PTE into the faulting process. |
| * |
| * Note that the faulting process may involve evicting existing objects |
| * from the GTT and/or fence registers to make room. So performance may |
| * suffer if the GTT working set is large or there are few fence registers |
| * left. |
| */ |
| int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) |
| { |
| struct drm_gem_object *obj = vma->vm_private_data; |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| pgoff_t page_offset; |
| unsigned long pfn; |
| int ret = 0; |
| bool write = !!(vmf->flags & FAULT_FLAG_WRITE); |
| |
| /* We don't use vmf->pgoff since that has the fake offset */ |
| page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >> |
| PAGE_SHIFT; |
| |
| /* Now bind it into the GTT if needed */ |
| mutex_lock(&dev->struct_mutex); |
| BUG_ON(obj_priv->pin_count && !obj_priv->pin_mappable); |
| if (!i915_gem_object_cpu_accessible(obj_priv)) |
| i915_gem_object_unbind(obj); |
| |
| if (!obj_priv->gtt_space) { |
| ret = i915_gem_object_bind_to_gtt(obj, 0, true); |
| if (ret) |
| goto unlock; |
| |
| ret = i915_gem_object_set_to_gtt_domain(obj, write); |
| if (ret) |
| goto unlock; |
| } |
| |
| if (!obj_priv->fault_mappable) { |
| obj_priv->fault_mappable = true; |
| i915_gem_info_update_mappable(dev_priv, obj, true); |
| } |
| |
| /* Need a new fence register? */ |
| if (obj_priv->tiling_mode != I915_TILING_NONE) { |
| ret = i915_gem_object_get_fence_reg(obj, true); |
| if (ret) |
| goto unlock; |
| } |
| |
| if (i915_gem_object_is_inactive(obj_priv)) |
| list_move_tail(&obj_priv->mm_list, &dev_priv->mm.inactive_list); |
| |
| pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) + |
| page_offset; |
| |
| /* Finally, remap it using the new GTT offset */ |
| ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| |
| switch (ret) { |
| case 0: |
| case -ERESTARTSYS: |
| return VM_FAULT_NOPAGE; |
| case -ENOMEM: |
| case -EAGAIN: |
| return VM_FAULT_OOM; |
| default: |
| return VM_FAULT_SIGBUS; |
| } |
| } |
| |
| /** |
| * i915_gem_create_mmap_offset - create a fake mmap offset for an object |
| * @obj: obj in question |
| * |
| * GEM memory mapping works by handing back to userspace a fake mmap offset |
| * it can use in a subsequent mmap(2) call. The DRM core code then looks |
| * up the object based on the offset and sets up the various memory mapping |
| * structures. |
| * |
| * This routine allocates and attaches a fake offset for @obj. |
| */ |
| static int |
| i915_gem_create_mmap_offset(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_gem_mm *mm = dev->mm_private; |
| struct drm_map_list *list; |
| struct drm_local_map *map; |
| int ret = 0; |
| |
| /* Set the object up for mmap'ing */ |
| list = &obj->map_list; |
| list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL); |
| if (!list->map) |
| return -ENOMEM; |
| |
| map = list->map; |
| map->type = _DRM_GEM; |
| map->size = obj->size; |
| map->handle = obj; |
| |
| /* Get a DRM GEM mmap offset allocated... */ |
| list->file_offset_node = drm_mm_search_free(&mm->offset_manager, |
| obj->size / PAGE_SIZE, 0, 0); |
| if (!list->file_offset_node) { |
| DRM_ERROR("failed to allocate offset for bo %d\n", obj->name); |
| ret = -ENOSPC; |
| goto out_free_list; |
| } |
| |
| list->file_offset_node = drm_mm_get_block(list->file_offset_node, |
| obj->size / PAGE_SIZE, 0); |
| if (!list->file_offset_node) { |
| ret = -ENOMEM; |
| goto out_free_list; |
| } |
| |
| list->hash.key = list->file_offset_node->start; |
| ret = drm_ht_insert_item(&mm->offset_hash, &list->hash); |
| if (ret) { |
| DRM_ERROR("failed to add to map hash\n"); |
| goto out_free_mm; |
| } |
| |
| return 0; |
| |
| out_free_mm: |
| drm_mm_put_block(list->file_offset_node); |
| out_free_list: |
| kfree(list->map); |
| list->map = NULL; |
| |
| return ret; |
| } |
| |
| /** |
| * i915_gem_release_mmap - remove physical page mappings |
| * @obj: obj in question |
| * |
| * Preserve the reservation of the mmapping with the DRM core code, but |
| * relinquish ownership of the pages back to the system. |
| * |
| * It is vital that we remove the page mapping if we have mapped a tiled |
| * object through the GTT and then lose the fence register due to |
| * resource pressure. Similarly if the object has been moved out of the |
| * aperture, than pages mapped into userspace must be revoked. Removing the |
| * mapping will then trigger a page fault on the next user access, allowing |
| * fixup by i915_gem_fault(). |
| */ |
| void |
| i915_gem_release_mmap(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| if (unlikely(obj->map_list.map && dev->dev_mapping)) |
| unmap_mapping_range(dev->dev_mapping, |
| (loff_t)obj->map_list.hash.key<<PAGE_SHIFT, |
| obj->size, 1); |
| |
| if (obj_priv->fault_mappable) { |
| obj_priv->fault_mappable = false; |
| i915_gem_info_update_mappable(dev_priv, obj, false); |
| } |
| } |
| |
| static void |
| i915_gem_free_mmap_offset(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_gem_mm *mm = dev->mm_private; |
| struct drm_map_list *list = &obj->map_list; |
| |
| drm_ht_remove_item(&mm->offset_hash, &list->hash); |
| drm_mm_put_block(list->file_offset_node); |
| kfree(list->map); |
| list->map = NULL; |
| } |
| |
| /** |
| * i915_gem_get_gtt_alignment - return required GTT alignment for an object |
| * @obj: object to check |
| * |
| * Return the required GTT alignment for an object, taking into account |
| * potential fence register mapping if needed. |
| */ |
| static uint32_t |
| i915_gem_get_gtt_alignment(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int start, i; |
| |
| /* |
| * Minimum alignment is 4k (GTT page size), but might be greater |
| * if a fence register is needed for the object. |
| */ |
| if (INTEL_INFO(dev)->gen >= 4 || obj_priv->tiling_mode == I915_TILING_NONE) |
| return 4096; |
| |
| /* |
| * Previous chips need to be aligned to the size of the smallest |
| * fence register that can contain the object. |
| */ |
| if (INTEL_INFO(dev)->gen == 3) |
| start = 1024*1024; |
| else |
| start = 512*1024; |
| |
| for (i = start; i < obj->size; i <<= 1) |
| ; |
| |
| return i; |
| } |
| |
| /** |
| * i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing |
| * @dev: DRM device |
| * @data: GTT mapping ioctl data |
| * @file_priv: GEM object info |
| * |
| * Simply returns the fake offset to userspace so it can mmap it. |
| * The mmap call will end up in drm_gem_mmap(), which will set things |
| * up so we can get faults in the handler above. |
| * |
| * The fault handler will take care of binding the object into the GTT |
| * (since it may have been evicted to make room for something), allocating |
| * a fence register, and mapping the appropriate aperture address into |
| * userspace. |
| */ |
| int |
| i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_mmap_gtt *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret; |
| |
| if (!(dev->driver->driver_features & DRIVER_GEM)) |
| return -ENODEV; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| if (obj->size > dev_priv->mm.gtt_mappable_end) { |
| ret = -E2BIG; |
| goto unlock; |
| } |
| |
| if (obj_priv->madv != I915_MADV_WILLNEED) { |
| DRM_ERROR("Attempting to mmap a purgeable buffer\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (!obj->map_list.map) { |
| ret = i915_gem_create_mmap_offset(obj); |
| if (ret) |
| goto out; |
| } |
| |
| args->offset = (u64)obj->map_list.hash.key << PAGE_SHIFT; |
| |
| out: |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| static void |
| i915_gem_object_put_pages(struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int page_count = obj->size / PAGE_SIZE; |
| int i; |
| |
| BUG_ON(obj_priv->pages_refcount == 0); |
| BUG_ON(obj_priv->madv == __I915_MADV_PURGED); |
| |
| if (--obj_priv->pages_refcount != 0) |
| return; |
| |
| if (obj_priv->tiling_mode != I915_TILING_NONE) |
| i915_gem_object_save_bit_17_swizzle(obj); |
| |
| if (obj_priv->madv == I915_MADV_DONTNEED) |
| obj_priv->dirty = 0; |
| |
| for (i = 0; i < page_count; i++) { |
| if (obj_priv->dirty) |
| set_page_dirty(obj_priv->pages[i]); |
| |
| if (obj_priv->madv == I915_MADV_WILLNEED) |
| mark_page_accessed(obj_priv->pages[i]); |
| |
| page_cache_release(obj_priv->pages[i]); |
| } |
| obj_priv->dirty = 0; |
| |
| drm_free_large(obj_priv->pages); |
| obj_priv->pages = NULL; |
| } |
| |
| static uint32_t |
| i915_gem_next_request_seqno(struct drm_device *dev, |
| struct intel_ring_buffer *ring) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| ring->outstanding_lazy_request = true; |
| return dev_priv->next_seqno; |
| } |
| |
| static void |
| i915_gem_object_move_to_active(struct drm_gem_object *obj, |
| struct intel_ring_buffer *ring) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| uint32_t seqno = i915_gem_next_request_seqno(dev, ring); |
| |
| BUG_ON(ring == NULL); |
| obj_priv->ring = ring; |
| |
| /* Add a reference if we're newly entering the active list. */ |
| if (!obj_priv->active) { |
| drm_gem_object_reference(obj); |
| obj_priv->active = 1; |
| } |
| |
| /* Move from whatever list we were on to the tail of execution. */ |
| list_move_tail(&obj_priv->mm_list, &dev_priv->mm.active_list); |
| list_move_tail(&obj_priv->ring_list, &ring->active_list); |
| obj_priv->last_rendering_seqno = seqno; |
| } |
| |
| static void |
| i915_gem_object_move_to_flushing(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| BUG_ON(!obj_priv->active); |
| list_move_tail(&obj_priv->mm_list, &dev_priv->mm.flushing_list); |
| list_del_init(&obj_priv->ring_list); |
| obj_priv->last_rendering_seqno = 0; |
| } |
| |
| /* Immediately discard the backing storage */ |
| static void |
| i915_gem_object_truncate(struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct inode *inode; |
| |
| /* Our goal here is to return as much of the memory as |
| * is possible back to the system as we are called from OOM. |
| * To do this we must instruct the shmfs to drop all of its |
| * backing pages, *now*. Here we mirror the actions taken |
| * when by shmem_delete_inode() to release the backing store. |
| */ |
| inode = obj->filp->f_path.dentry->d_inode; |
| truncate_inode_pages(inode->i_mapping, 0); |
| if (inode->i_op->truncate_range) |
| inode->i_op->truncate_range(inode, 0, (loff_t)-1); |
| |
| obj_priv->madv = __I915_MADV_PURGED; |
| } |
| |
| static inline int |
| i915_gem_object_is_purgeable(struct drm_i915_gem_object *obj_priv) |
| { |
| return obj_priv->madv == I915_MADV_DONTNEED; |
| } |
| |
| static void |
| i915_gem_object_move_to_inactive(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| if (obj_priv->pin_count != 0) |
| list_move_tail(&obj_priv->mm_list, &dev_priv->mm.pinned_list); |
| else |
| list_move_tail(&obj_priv->mm_list, &dev_priv->mm.inactive_list); |
| list_del_init(&obj_priv->ring_list); |
| |
| BUG_ON(!list_empty(&obj_priv->gpu_write_list)); |
| |
| obj_priv->last_rendering_seqno = 0; |
| obj_priv->ring = NULL; |
| if (obj_priv->active) { |
| obj_priv->active = 0; |
| drm_gem_object_unreference(obj); |
| } |
| WARN_ON(i915_verify_lists(dev)); |
| } |
| |
| static void |
| i915_gem_process_flushing_list(struct drm_device *dev, |
| uint32_t flush_domains, |
| struct intel_ring_buffer *ring) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv, *next; |
| |
| list_for_each_entry_safe(obj_priv, next, |
| &ring->gpu_write_list, |
| gpu_write_list) { |
| struct drm_gem_object *obj = &obj_priv->base; |
| |
| if (obj->write_domain & flush_domains) { |
| uint32_t old_write_domain = obj->write_domain; |
| |
| obj->write_domain = 0; |
| list_del_init(&obj_priv->gpu_write_list); |
| i915_gem_object_move_to_active(obj, ring); |
| |
| /* update the fence lru list */ |
| if (obj_priv->fence_reg != I915_FENCE_REG_NONE) { |
| struct drm_i915_fence_reg *reg = |
| &dev_priv->fence_regs[obj_priv->fence_reg]; |
| list_move_tail(®->lru_list, |
| &dev_priv->mm.fence_list); |
| } |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->read_domains, |
| old_write_domain); |
| } |
| } |
| } |
| |
| int |
| i915_add_request(struct drm_device *dev, |
| struct drm_file *file, |
| struct drm_i915_gem_request *request, |
| struct intel_ring_buffer *ring) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_file_private *file_priv = NULL; |
| uint32_t seqno; |
| int was_empty; |
| int ret; |
| |
| BUG_ON(request == NULL); |
| |
| if (file != NULL) |
| file_priv = file->driver_priv; |
| |
| ret = ring->add_request(ring, &seqno); |
| if (ret) |
| return ret; |
| |
| ring->outstanding_lazy_request = false; |
| |
| request->seqno = seqno; |
| request->ring = ring; |
| request->emitted_jiffies = jiffies; |
| was_empty = list_empty(&ring->request_list); |
| list_add_tail(&request->list, &ring->request_list); |
| |
| if (file_priv) { |
| spin_lock(&file_priv->mm.lock); |
| request->file_priv = file_priv; |
| list_add_tail(&request->client_list, |
| &file_priv->mm.request_list); |
| spin_unlock(&file_priv->mm.lock); |
| } |
| |
| if (!dev_priv->mm.suspended) { |
| mod_timer(&dev_priv->hangcheck_timer, |
| jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); |
| if (was_empty) |
| queue_delayed_work(dev_priv->wq, |
| &dev_priv->mm.retire_work, HZ); |
| } |
| return 0; |
| } |
| |
| /** |
| * Command execution barrier |
| * |
| * Ensures that all commands in the ring are finished |
| * before signalling the CPU |
| */ |
| static void |
| i915_retire_commands(struct drm_device *dev, struct intel_ring_buffer *ring) |
| { |
| uint32_t flush_domains = 0; |
| |
| /* The sampler always gets flushed on i965 (sigh) */ |
| if (INTEL_INFO(dev)->gen >= 4) |
| flush_domains |= I915_GEM_DOMAIN_SAMPLER; |
| |
| ring->flush(ring, I915_GEM_DOMAIN_COMMAND, flush_domains); |
| } |
| |
| static inline void |
| i915_gem_request_remove_from_client(struct drm_i915_gem_request *request) |
| { |
| struct drm_i915_file_private *file_priv = request->file_priv; |
| |
| if (!file_priv) |
| return; |
| |
| spin_lock(&file_priv->mm.lock); |
| list_del(&request->client_list); |
| request->file_priv = NULL; |
| spin_unlock(&file_priv->mm.lock); |
| } |
| |
| static void i915_gem_reset_ring_lists(struct drm_i915_private *dev_priv, |
| struct intel_ring_buffer *ring) |
| { |
| while (!list_empty(&ring->request_list)) { |
| struct drm_i915_gem_request *request; |
| |
| request = list_first_entry(&ring->request_list, |
| struct drm_i915_gem_request, |
| list); |
| |
| list_del(&request->list); |
| i915_gem_request_remove_from_client(request); |
| kfree(request); |
| } |
| |
| while (!list_empty(&ring->active_list)) { |
| struct drm_i915_gem_object *obj_priv; |
| |
| obj_priv = list_first_entry(&ring->active_list, |
| struct drm_i915_gem_object, |
| ring_list); |
| |
| obj_priv->base.write_domain = 0; |
| list_del_init(&obj_priv->gpu_write_list); |
| i915_gem_object_move_to_inactive(&obj_priv->base); |
| } |
| } |
| |
| void i915_gem_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv; |
| int i; |
| |
| i915_gem_reset_ring_lists(dev_priv, &dev_priv->render_ring); |
| i915_gem_reset_ring_lists(dev_priv, &dev_priv->bsd_ring); |
| i915_gem_reset_ring_lists(dev_priv, &dev_priv->blt_ring); |
| |
| /* Remove anything from the flushing lists. The GPU cache is likely |
| * to be lost on reset along with the data, so simply move the |
| * lost bo to the inactive list. |
| */ |
| while (!list_empty(&dev_priv->mm.flushing_list)) { |
| obj_priv = list_first_entry(&dev_priv->mm.flushing_list, |
| struct drm_i915_gem_object, |
| mm_list); |
| |
| obj_priv->base.write_domain = 0; |
| list_del_init(&obj_priv->gpu_write_list); |
| i915_gem_object_move_to_inactive(&obj_priv->base); |
| } |
| |
| /* Move everything out of the GPU domains to ensure we do any |
| * necessary invalidation upon reuse. |
| */ |
| list_for_each_entry(obj_priv, |
| &dev_priv->mm.inactive_list, |
| mm_list) |
| { |
| obj_priv->base.read_domains &= ~I915_GEM_GPU_DOMAINS; |
| } |
| |
| /* The fence registers are invalidated so clear them out */ |
| for (i = 0; i < 16; i++) { |
| struct drm_i915_fence_reg *reg; |
| |
| reg = &dev_priv->fence_regs[i]; |
| if (!reg->obj) |
| continue; |
| |
| i915_gem_clear_fence_reg(reg->obj); |
| } |
| } |
| |
| /** |
| * This function clears the request list as sequence numbers are passed. |
| */ |
| static void |
| i915_gem_retire_requests_ring(struct drm_device *dev, |
| struct intel_ring_buffer *ring) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| uint32_t seqno; |
| |
| if (!ring->status_page.page_addr || |
| list_empty(&ring->request_list)) |
| return; |
| |
| WARN_ON(i915_verify_lists(dev)); |
| |
| seqno = ring->get_seqno(ring); |
| while (!list_empty(&ring->request_list)) { |
| struct drm_i915_gem_request *request; |
| |
| request = list_first_entry(&ring->request_list, |
| struct drm_i915_gem_request, |
| list); |
| |
| if (!i915_seqno_passed(seqno, request->seqno)) |
| break; |
| |
| trace_i915_gem_request_retire(dev, request->seqno); |
| |
| list_del(&request->list); |
| i915_gem_request_remove_from_client(request); |
| kfree(request); |
| } |
| |
| /* Move any buffers on the active list that are no longer referenced |
| * by the ringbuffer to the flushing/inactive lists as appropriate. |
| */ |
| while (!list_empty(&ring->active_list)) { |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| |
| obj_priv = list_first_entry(&ring->active_list, |
| struct drm_i915_gem_object, |
| ring_list); |
| |
| if (!i915_seqno_passed(seqno, obj_priv->last_rendering_seqno)) |
| break; |
| |
| obj = &obj_priv->base; |
| if (obj->write_domain != 0) |
| i915_gem_object_move_to_flushing(obj); |
| else |
| i915_gem_object_move_to_inactive(obj); |
| } |
| |
| if (unlikely (dev_priv->trace_irq_seqno && |
| i915_seqno_passed(dev_priv->trace_irq_seqno, seqno))) { |
| ring->user_irq_put(ring); |
| dev_priv->trace_irq_seqno = 0; |
| } |
| |
| WARN_ON(i915_verify_lists(dev)); |
| } |
| |
| void |
| i915_gem_retire_requests(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (!list_empty(&dev_priv->mm.deferred_free_list)) { |
| struct drm_i915_gem_object *obj_priv, *tmp; |
| |
| /* We must be careful that during unbind() we do not |
| * accidentally infinitely recurse into retire requests. |
| * Currently: |
| * retire -> free -> unbind -> wait -> retire_ring |
| */ |
| list_for_each_entry_safe(obj_priv, tmp, |
| &dev_priv->mm.deferred_free_list, |
| mm_list) |
| i915_gem_free_object_tail(&obj_priv->base); |
| } |
| |
| i915_gem_retire_requests_ring(dev, &dev_priv->render_ring); |
| i915_gem_retire_requests_ring(dev, &dev_priv->bsd_ring); |
| i915_gem_retire_requests_ring(dev, &dev_priv->blt_ring); |
| } |
| |
| static void |
| i915_gem_retire_work_handler(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv; |
| struct drm_device *dev; |
| |
| dev_priv = container_of(work, drm_i915_private_t, |
| mm.retire_work.work); |
| dev = dev_priv->dev; |
| |
| /* Come back later if the device is busy... */ |
| if (!mutex_trylock(&dev->struct_mutex)) { |
| queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ); |
| return; |
| } |
| |
| i915_gem_retire_requests(dev); |
| |
| if (!dev_priv->mm.suspended && |
| (!list_empty(&dev_priv->render_ring.request_list) || |
| !list_empty(&dev_priv->bsd_ring.request_list) || |
| !list_empty(&dev_priv->blt_ring.request_list))) |
| queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ); |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| int |
| i915_do_wait_request(struct drm_device *dev, uint32_t seqno, |
| bool interruptible, struct intel_ring_buffer *ring) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| u32 ier; |
| int ret = 0; |
| |
| BUG_ON(seqno == 0); |
| |
| if (atomic_read(&dev_priv->mm.wedged)) |
| return -EAGAIN; |
| |
| if (ring->outstanding_lazy_request) { |
| struct drm_i915_gem_request *request; |
| |
| request = kzalloc(sizeof(*request), GFP_KERNEL); |
| if (request == NULL) |
| return -ENOMEM; |
| |
| ret = i915_add_request(dev, NULL, request, ring); |
| if (ret) { |
| kfree(request); |
| return ret; |
| } |
| |
| seqno = request->seqno; |
| } |
| BUG_ON(seqno == dev_priv->next_seqno); |
| |
| if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) { |
| if (HAS_PCH_SPLIT(dev)) |
| ier = I915_READ(DEIER) | I915_READ(GTIER); |
| else |
| ier = I915_READ(IER); |
| if (!ier) { |
| DRM_ERROR("something (likely vbetool) disabled " |
| "interrupts, re-enabling\n"); |
| i915_driver_irq_preinstall(dev); |
| i915_driver_irq_postinstall(dev); |
| } |
| |
| trace_i915_gem_request_wait_begin(dev, seqno); |
| |
| ring->waiting_seqno = seqno; |
| ring->user_irq_get(ring); |
| if (interruptible) |
| ret = wait_event_interruptible(ring->irq_queue, |
| i915_seqno_passed(ring->get_seqno(ring), seqno) |
| || atomic_read(&dev_priv->mm.wedged)); |
| else |
| wait_event(ring->irq_queue, |
| i915_seqno_passed(ring->get_seqno(ring), seqno) |
| || atomic_read(&dev_priv->mm.wedged)); |
| |
| ring->user_irq_put(ring); |
| ring->waiting_seqno = 0; |
| |
| trace_i915_gem_request_wait_end(dev, seqno); |
| } |
| if (atomic_read(&dev_priv->mm.wedged)) |
| ret = -EAGAIN; |
| |
| if (ret && ret != -ERESTARTSYS) |
| DRM_ERROR("%s returns %d (awaiting %d at %d, next %d)\n", |
| __func__, ret, seqno, ring->get_seqno(ring), |
| dev_priv->next_seqno); |
| |
| /* Directly dispatch request retiring. While we have the work queue |
| * to handle this, the waiter on a request often wants an associated |
| * buffer to have made it to the inactive list, and we would need |
| * a separate wait queue to handle that. |
| */ |
| if (ret == 0) |
| i915_gem_retire_requests_ring(dev, ring); |
| |
| return ret; |
| } |
| |
| /** |
| * Waits for a sequence number to be signaled, and cleans up the |
| * request and object lists appropriately for that event. |
| */ |
| static int |
| i915_wait_request(struct drm_device *dev, uint32_t seqno, |
| struct intel_ring_buffer *ring) |
| { |
| return i915_do_wait_request(dev, seqno, 1, ring); |
| } |
| |
| static void |
| i915_gem_flush_ring(struct drm_device *dev, |
| struct drm_file *file_priv, |
| struct intel_ring_buffer *ring, |
| uint32_t invalidate_domains, |
| uint32_t flush_domains) |
| { |
| ring->flush(ring, invalidate_domains, flush_domains); |
| i915_gem_process_flushing_list(dev, flush_domains, ring); |
| } |
| |
| static void |
| i915_gem_flush(struct drm_device *dev, |
| struct drm_file *file_priv, |
| uint32_t invalidate_domains, |
| uint32_t flush_domains, |
| uint32_t flush_rings) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (flush_domains & I915_GEM_DOMAIN_CPU) |
| drm_agp_chipset_flush(dev); |
| |
| if ((flush_domains | invalidate_domains) & I915_GEM_GPU_DOMAINS) { |
| if (flush_rings & RING_RENDER) |
| i915_gem_flush_ring(dev, file_priv, |
| &dev_priv->render_ring, |
| invalidate_domains, flush_domains); |
| if (flush_rings & RING_BSD) |
| i915_gem_flush_ring(dev, file_priv, |
| &dev_priv->bsd_ring, |
| invalidate_domains, flush_domains); |
| if (flush_rings & RING_BLT) |
| i915_gem_flush_ring(dev, file_priv, |
| &dev_priv->blt_ring, |
| invalidate_domains, flush_domains); |
| } |
| } |
| |
| /** |
| * Ensures that all rendering to the object has completed and the object is |
| * safe to unbind from the GTT or access from the CPU. |
| */ |
| static int |
| i915_gem_object_wait_rendering(struct drm_gem_object *obj, |
| bool interruptible) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int ret; |
| |
| /* This function only exists to support waiting for existing rendering, |
| * not for emitting required flushes. |
| */ |
| BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); |
| |
| /* If there is rendering queued on the buffer being evicted, wait for |
| * it. |
| */ |
| if (obj_priv->active) { |
| ret = i915_do_wait_request(dev, |
| obj_priv->last_rendering_seqno, |
| interruptible, |
| obj_priv->ring); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Unbinds an object from the GTT aperture. |
| */ |
| int |
| i915_gem_object_unbind(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int ret = 0; |
| |
| if (obj_priv->gtt_space == NULL) |
| return 0; |
| |
| if (obj_priv->pin_count != 0) { |
| DRM_ERROR("Attempting to unbind pinned buffer\n"); |
| return -EINVAL; |
| } |
| |
| /* blow away mappings if mapped through GTT */ |
| i915_gem_release_mmap(obj); |
| |
| /* Move the object to the CPU domain to ensure that |
| * any possible CPU writes while it's not in the GTT |
| * are flushed when we go to remap it. This will |
| * also ensure that all pending GPU writes are finished |
| * before we unbind. |
| */ |
| ret = i915_gem_object_set_to_cpu_domain(obj, 1); |
| if (ret == -ERESTARTSYS) |
| return ret; |
| /* Continue on if we fail due to EIO, the GPU is hung so we |
| * should be safe and we need to cleanup or else we might |
| * cause memory corruption through use-after-free. |
| */ |
| if (ret) { |
| i915_gem_clflush_object(obj); |
| obj->read_domains = obj->write_domain = I915_GEM_DOMAIN_CPU; |
| } |
| |
| /* release the fence reg _after_ flushing */ |
| if (obj_priv->fence_reg != I915_FENCE_REG_NONE) |
| i915_gem_clear_fence_reg(obj); |
| |
| drm_unbind_agp(obj_priv->agp_mem); |
| drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE); |
| |
| i915_gem_object_put_pages(obj); |
| BUG_ON(obj_priv->pages_refcount); |
| |
| i915_gem_info_remove_gtt(dev_priv, obj); |
| list_del_init(&obj_priv->mm_list); |
| |
| drm_mm_put_block(obj_priv->gtt_space); |
| obj_priv->gtt_space = NULL; |
| obj_priv->gtt_offset = 0; |
| |
| if (i915_gem_object_is_purgeable(obj_priv)) |
| i915_gem_object_truncate(obj); |
| |
| trace_i915_gem_object_unbind(obj); |
| |
| return ret; |
| } |
| |
| static int i915_ring_idle(struct drm_device *dev, |
| struct intel_ring_buffer *ring) |
| { |
| if (list_empty(&ring->gpu_write_list)) |
| return 0; |
| |
| i915_gem_flush_ring(dev, NULL, ring, |
| I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS); |
| return i915_wait_request(dev, |
| i915_gem_next_request_seqno(dev, ring), |
| ring); |
| } |
| |
| int |
| i915_gpu_idle(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| bool lists_empty; |
| int ret; |
| |
| lists_empty = (list_empty(&dev_priv->mm.flushing_list) && |
| list_empty(&dev_priv->render_ring.active_list) && |
| list_empty(&dev_priv->bsd_ring.active_list) && |
| list_empty(&dev_priv->blt_ring.active_list)); |
| if (lists_empty) |
| return 0; |
| |
| /* Flush everything onto the inactive list. */ |
| ret = i915_ring_idle(dev, &dev_priv->render_ring); |
| if (ret) |
| return ret; |
| |
| ret = i915_ring_idle(dev, &dev_priv->bsd_ring); |
| if (ret) |
| return ret; |
| |
| ret = i915_ring_idle(dev, &dev_priv->blt_ring); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int |
| i915_gem_object_get_pages(struct drm_gem_object *obj, |
| gfp_t gfpmask) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int page_count, i; |
| struct address_space *mapping; |
| struct inode *inode; |
| struct page *page; |
| |
| BUG_ON(obj_priv->pages_refcount |
| == DRM_I915_GEM_OBJECT_MAX_PAGES_REFCOUNT); |
| |
| if (obj_priv->pages_refcount++ != 0) |
| return 0; |
| |
| /* Get the list of pages out of our struct file. They'll be pinned |
| * at this point until we release them. |
| */ |
| page_count = obj->size / PAGE_SIZE; |
| BUG_ON(obj_priv->pages != NULL); |
| obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *)); |
| if (obj_priv->pages == NULL) { |
| obj_priv->pages_refcount--; |
| return -ENOMEM; |
| } |
| |
| inode = obj->filp->f_path.dentry->d_inode; |
| mapping = inode->i_mapping; |
| for (i = 0; i < page_count; i++) { |
| page = read_cache_page_gfp(mapping, i, |
| GFP_HIGHUSER | |
| __GFP_COLD | |
| __GFP_RECLAIMABLE | |
| gfpmask); |
| if (IS_ERR(page)) |
| goto err_pages; |
| |
| obj_priv->pages[i] = page; |
| } |
| |
| if (obj_priv->tiling_mode != I915_TILING_NONE) |
| i915_gem_object_do_bit_17_swizzle(obj); |
| |
| return 0; |
| |
| err_pages: |
| while (i--) |
| page_cache_release(obj_priv->pages[i]); |
| |
| drm_free_large(obj_priv->pages); |
| obj_priv->pages = NULL; |
| obj_priv->pages_refcount--; |
| return PTR_ERR(page); |
| } |
| |
| static void sandybridge_write_fence_reg(struct drm_i915_fence_reg *reg) |
| { |
| struct drm_gem_object *obj = reg->obj; |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int regnum = obj_priv->fence_reg; |
| uint64_t val; |
| |
| val = (uint64_t)((obj_priv->gtt_offset + obj->size - 4096) & |
| 0xfffff000) << 32; |
| val |= obj_priv->gtt_offset & 0xfffff000; |
| val |= (uint64_t)((obj_priv->stride / 128) - 1) << |
| SANDYBRIDGE_FENCE_PITCH_SHIFT; |
| |
| if (obj_priv->tiling_mode == I915_TILING_Y) |
| val |= 1 << I965_FENCE_TILING_Y_SHIFT; |
| val |= I965_FENCE_REG_VALID; |
| |
| I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (regnum * 8), val); |
| } |
| |
| static void i965_write_fence_reg(struct drm_i915_fence_reg *reg) |
| { |
| struct drm_gem_object *obj = reg->obj; |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int regnum = obj_priv->fence_reg; |
| uint64_t val; |
| |
| val = (uint64_t)((obj_priv->gtt_offset + obj->size - 4096) & |
| 0xfffff000) << 32; |
| val |= obj_priv->gtt_offset & 0xfffff000; |
| val |= ((obj_priv->stride / 128) - 1) << I965_FENCE_PITCH_SHIFT; |
| if (obj_priv->tiling_mode == I915_TILING_Y) |
| val |= 1 << I965_FENCE_TILING_Y_SHIFT; |
| val |= I965_FENCE_REG_VALID; |
| |
| I915_WRITE64(FENCE_REG_965_0 + (regnum * 8), val); |
| } |
| |
| static void i915_write_fence_reg(struct drm_i915_fence_reg *reg) |
| { |
| struct drm_gem_object *obj = reg->obj; |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int regnum = obj_priv->fence_reg; |
| int tile_width; |
| uint32_t fence_reg, val; |
| uint32_t pitch_val; |
| |
| if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || |
| (obj_priv->gtt_offset & (obj->size - 1))) { |
| WARN(1, "%s: object 0x%08x not 1M or size (0x%zx) aligned\n", |
| __func__, obj_priv->gtt_offset, obj->size); |
| return; |
| } |
| |
| if (obj_priv->tiling_mode == I915_TILING_Y && |
| HAS_128_BYTE_Y_TILING(dev)) |
| tile_width = 128; |
| else |
| tile_width = 512; |
| |
| /* Note: pitch better be a power of two tile widths */ |
| pitch_val = obj_priv->stride / tile_width; |
| pitch_val = ffs(pitch_val) - 1; |
| |
| if (obj_priv->tiling_mode == I915_TILING_Y && |
| HAS_128_BYTE_Y_TILING(dev)) |
| WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL); |
| else |
| WARN_ON(pitch_val > I915_FENCE_MAX_PITCH_VAL); |
| |
| val = obj_priv->gtt_offset; |
| if (obj_priv->tiling_mode == I915_TILING_Y) |
| val |= 1 << I830_FENCE_TILING_Y_SHIFT; |
| val |= I915_FENCE_SIZE_BITS(obj->size); |
| val |= pitch_val << I830_FENCE_PITCH_SHIFT; |
| val |= I830_FENCE_REG_VALID; |
| |
| if (regnum < 8) |
| fence_reg = FENCE_REG_830_0 + (regnum * 4); |
| else |
| fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4); |
| I915_WRITE(fence_reg, val); |
| } |
| |
| static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) |
| { |
| struct drm_gem_object *obj = reg->obj; |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int regnum = obj_priv->fence_reg; |
| uint32_t val; |
| uint32_t pitch_val; |
| uint32_t fence_size_bits; |
| |
| if ((obj_priv->gtt_offset & ~I830_FENCE_START_MASK) || |
| (obj_priv->gtt_offset & (obj->size - 1))) { |
| WARN(1, "%s: object 0x%08x not 512K or size aligned\n", |
| __func__, obj_priv->gtt_offset); |
| return; |
| } |
| |
| pitch_val = obj_priv->stride / 128; |
| pitch_val = ffs(pitch_val) - 1; |
| WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL); |
| |
| val = obj_priv->gtt_offset; |
| if (obj_priv->tiling_mode == I915_TILING_Y) |
| val |= 1 << I830_FENCE_TILING_Y_SHIFT; |
| fence_size_bits = I830_FENCE_SIZE_BITS(obj->size); |
| WARN_ON(fence_size_bits & ~0x00000f00); |
| val |= fence_size_bits; |
| val |= pitch_val << I830_FENCE_PITCH_SHIFT; |
| val |= I830_FENCE_REG_VALID; |
| |
| I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val); |
| } |
| |
| static int i915_find_fence_reg(struct drm_device *dev, |
| bool interruptible) |
| { |
| struct drm_i915_fence_reg *reg = NULL; |
| struct drm_i915_gem_object *obj_priv = NULL; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_gem_object *obj = NULL; |
| int i, avail, ret; |
| |
| /* First try to find a free reg */ |
| avail = 0; |
| for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { |
| reg = &dev_priv->fence_regs[i]; |
| if (!reg->obj) |
| return i; |
| |
| obj_priv = to_intel_bo(reg->obj); |
| if (!obj_priv->pin_count) |
| avail++; |
| } |
| |
| if (avail == 0) |
| return -ENOSPC; |
| |
| /* None available, try to steal one or wait for a user to finish */ |
| i = I915_FENCE_REG_NONE; |
| list_for_each_entry(reg, &dev_priv->mm.fence_list, |
| lru_list) { |
| obj = reg->obj; |
| obj_priv = to_intel_bo(obj); |
| |
| if (obj_priv->pin_count) |
| continue; |
| |
| /* found one! */ |
| i = obj_priv->fence_reg; |
| break; |
| } |
| |
| BUG_ON(i == I915_FENCE_REG_NONE); |
| |
| /* We only have a reference on obj from the active list. put_fence_reg |
| * might drop that one, causing a use-after-free in it. So hold a |
| * private reference to obj like the other callers of put_fence_reg |
| * (set_tiling ioctl) do. */ |
| drm_gem_object_reference(obj); |
| ret = i915_gem_object_put_fence_reg(obj, interruptible); |
| drm_gem_object_unreference(obj); |
| if (ret != 0) |
| return ret; |
| |
| return i; |
| } |
| |
| /** |
| * i915_gem_object_get_fence_reg - set up a fence reg for an object |
| * @obj: object to map through a fence reg |
| * |
| * When mapping objects through the GTT, userspace wants to be able to write |
| * to them without having to worry about swizzling if the object is tiled. |
| * |
| * This function walks the fence regs looking for a free one for @obj, |
| * stealing one if it can't find any. |
| * |
| * It then sets up the reg based on the object's properties: address, pitch |
| * and tiling format. |
| */ |
| int |
| i915_gem_object_get_fence_reg(struct drm_gem_object *obj, |
| bool interruptible) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct drm_i915_fence_reg *reg = NULL; |
| int ret; |
| |
| /* Just update our place in the LRU if our fence is getting used. */ |
| if (obj_priv->fence_reg != I915_FENCE_REG_NONE) { |
| reg = &dev_priv->fence_regs[obj_priv->fence_reg]; |
| list_move_tail(®->lru_list, &dev_priv->mm.fence_list); |
| return 0; |
| } |
| |
| switch (obj_priv->tiling_mode) { |
| case I915_TILING_NONE: |
| WARN(1, "allocating a fence for non-tiled object?\n"); |
| break; |
| case I915_TILING_X: |
| if (!obj_priv->stride) |
| return -EINVAL; |
| WARN((obj_priv->stride & (512 - 1)), |
| "object 0x%08x is X tiled but has non-512B pitch\n", |
| obj_priv->gtt_offset); |
| break; |
| case I915_TILING_Y: |
| if (!obj_priv->stride) |
| return -EINVAL; |
| WARN((obj_priv->stride & (128 - 1)), |
| "object 0x%08x is Y tiled but has non-128B pitch\n", |
| obj_priv->gtt_offset); |
| break; |
| } |
| |
| ret = i915_find_fence_reg(dev, interruptible); |
| if (ret < 0) |
| return ret; |
| |
| obj_priv->fence_reg = ret; |
| reg = &dev_priv->fence_regs[obj_priv->fence_reg]; |
| list_add_tail(®->lru_list, &dev_priv->mm.fence_list); |
| |
| reg->obj = obj; |
| |
| switch (INTEL_INFO(dev)->gen) { |
| case 6: |
| sandybridge_write_fence_reg(reg); |
| break; |
| case 5: |
| case 4: |
| i965_write_fence_reg(reg); |
| break; |
| case 3: |
| i915_write_fence_reg(reg); |
| break; |
| case 2: |
| i830_write_fence_reg(reg); |
| break; |
| } |
| |
| trace_i915_gem_object_get_fence(obj, obj_priv->fence_reg, |
| obj_priv->tiling_mode); |
| |
| return 0; |
| } |
| |
| /** |
| * i915_gem_clear_fence_reg - clear out fence register info |
| * @obj: object to clear |
| * |
| * Zeroes out the fence register itself and clears out the associated |
| * data structures in dev_priv and obj_priv. |
| */ |
| static void |
| i915_gem_clear_fence_reg(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct drm_i915_fence_reg *reg = |
| &dev_priv->fence_regs[obj_priv->fence_reg]; |
| uint32_t fence_reg; |
| |
| switch (INTEL_INFO(dev)->gen) { |
| case 6: |
| I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + |
| (obj_priv->fence_reg * 8), 0); |
| break; |
| case 5: |
| case 4: |
| I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0); |
| break; |
| case 3: |
| if (obj_priv->fence_reg >= 8) |
| fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg - 8) * 4; |
| else |
| case 2: |
| fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4; |
| |
| I915_WRITE(fence_reg, 0); |
| break; |
| } |
| |
| reg->obj = NULL; |
| obj_priv->fence_reg = I915_FENCE_REG_NONE; |
| list_del_init(®->lru_list); |
| } |
| |
| /** |
| * i915_gem_object_put_fence_reg - waits on outstanding fenced access |
| * to the buffer to finish, and then resets the fence register. |
| * @obj: tiled object holding a fence register. |
| * @bool: whether the wait upon the fence is interruptible |
| * |
| * Zeroes out the fence register itself and clears out the associated |
| * data structures in dev_priv and obj_priv. |
| */ |
| int |
| i915_gem_object_put_fence_reg(struct drm_gem_object *obj, |
| bool interruptible) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct drm_i915_fence_reg *reg; |
| |
| if (obj_priv->fence_reg == I915_FENCE_REG_NONE) |
| return 0; |
| |
| /* If we've changed tiling, GTT-mappings of the object |
| * need to re-fault to ensure that the correct fence register |
| * setup is in place. |
| */ |
| i915_gem_release_mmap(obj); |
| |
| /* On the i915, GPU access to tiled buffers is via a fence, |
| * therefore we must wait for any outstanding access to complete |
| * before clearing the fence. |
| */ |
| reg = &dev_priv->fence_regs[obj_priv->fence_reg]; |
| if (reg->gpu) { |
| int ret; |
| |
| ret = i915_gem_object_flush_gpu_write_domain(obj, true); |
| if (ret) |
| return ret; |
| |
| ret = i915_gem_object_wait_rendering(obj, interruptible); |
| if (ret) |
| return ret; |
| |
| reg->gpu = false; |
| } |
| |
| i915_gem_object_flush_gtt_write_domain(obj); |
| i915_gem_clear_fence_reg(obj); |
| |
| return 0; |
| } |
| |
| /** |
| * Finds free space in the GTT aperture and binds the object there. |
| */ |
| static int |
| i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, |
| unsigned alignment, |
| bool mappable) |
| { |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| struct drm_mm_node *free_space; |
| gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN; |
| int ret; |
| |
| if (obj_priv->madv != I915_MADV_WILLNEED) { |
| DRM_ERROR("Attempting to bind a purgeable object\n"); |
| return -EINVAL; |
| } |
| |
| if (alignment == 0) |
| alignment = i915_gem_get_gtt_alignment(obj); |
| if (alignment & (i915_gem_get_gtt_alignment(obj) - 1)) { |
| DRM_ERROR("Invalid object alignment requested %u\n", alignment); |
| return -EINVAL; |
| } |
| |
| /* If the object is bigger than the entire aperture, reject it early |
| * before evicting everything in a vain attempt to find space. |
| */ |
| if (obj->size > |
| (mappable ? dev_priv->mm.gtt_mappable_end : dev_priv->mm.gtt_total)) { |
| DRM_ERROR("Attempting to bind an object larger than the aperture\n"); |
| return -E2BIG; |
| } |
| |
| search_free: |
| if (mappable) |
| free_space = |
| drm_mm_search_free_in_range(&dev_priv->mm.gtt_space, |
| obj->size, alignment, 0, |
| dev_priv->mm.gtt_mappable_end, |
| 0); |
| else |
| free_space = drm_mm_search_free(&dev_priv->mm.gtt_space, |
| obj->size, alignment, 0); |
| |
| if (free_space != NULL) { |
| if (mappable) |
| obj_priv->gtt_space = |
| drm_mm_get_block_range_generic(free_space, |
| obj->size, |
| alignment, 0, |
| dev_priv->mm.gtt_mappable_end, |
| 0); |
| else |
| obj_priv->gtt_space = |
| drm_mm_get_block(free_space, obj->size, |
| alignment); |
| } |
| if (obj_priv->gtt_space == NULL) { |
| /* If the gtt is empty and we're still having trouble |
| * fitting our object in, we're out of memory. |
| */ |
| ret = i915_gem_evict_something(dev, obj->size, alignment, |
| mappable); |
| if (ret) |
| return ret; |
| |
| goto search_free; |
| } |
| |
| ret = i915_gem_object_get_pages(obj, gfpmask); |
| if (ret) { |
| drm_mm_put_block(obj_priv->gtt_space); |
| obj_priv->gtt_space = NULL; |
| |
| if (ret == -ENOMEM) { |
| /* first try to clear up some space from the GTT */ |
| ret = i915_gem_evict_something(dev, obj->size, |
| alignment, mappable); |
| if (ret) { |
| /* now try to shrink everyone else */ |
| if (gfpmask) { |
| gfpmask = 0; |
| goto search_free; |
| } |
| |
| return ret; |
| } |
| |
| goto search_free; |
| } |
| |
| return ret; |
| } |
| |
| /* Create an AGP memory structure pointing at our pages, and bind it |
| * into the GTT. |
| */ |
| obj_priv->agp_mem = drm_agp_bind_pages(dev, |
| obj_priv->pages, |
| obj->size >> PAGE_SHIFT, |
| obj_priv->gtt_space->start, |
| obj_priv->agp_type); |
| if (obj_priv->agp_mem == NULL) { |
| i915_gem_object_put_pages(obj); |
| drm_mm_put_block(obj_priv->gtt_space); |
| obj_priv->gtt_space = NULL; |
| |
| ret = i915_gem_evict_something(dev, obj->size, alignment, |
| mappable); |
| if (ret) |
| return ret; |
| |
| goto search_free; |
| } |
| |
| obj_priv->gtt_offset = obj_priv->gtt_space->start; |
| |
| /* keep track of bounds object by adding it to the inactive list */ |
| list_add_tail(&obj_priv->mm_list, &dev_priv->mm.inactive_list); |
| i915_gem_info_add_gtt(dev_priv, obj); |
| |
| /* Assert that the object is not currently in any GPU domain. As it |
| * wasn't in the GTT, there shouldn't be any way it could have been in |
| * a GPU cache |
| */ |
| BUG_ON(obj->read_domains & I915_GEM_GPU_DOMAINS); |
| BUG_ON(obj->write_domain & I915_GEM_GPU_DOMAINS); |
| |
| trace_i915_gem_object_bind(obj, obj_priv->gtt_offset, mappable); |
| |
| return 0; |
| } |
| |
| void |
| i915_gem_clflush_object(struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| /* If we don't have a page list set up, then we're not pinned |
| * to GPU, and we can ignore the cache flush because it'll happen |
| * again at bind time. |
| */ |
| if (obj_priv->pages == NULL) |
| return; |
| |
| trace_i915_gem_object_clflush(obj); |
| |
| drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE); |
| } |
| |
| /** Flushes any GPU write domain for the object if it's dirty. */ |
| static int |
| i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj, |
| bool pipelined) |
| { |
| struct drm_device *dev = obj->dev; |
| uint32_t old_write_domain; |
| |
| if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) |
| return 0; |
| |
| /* Queue the GPU write cache flushing we need. */ |
| old_write_domain = obj->write_domain; |
| i915_gem_flush_ring(dev, NULL, |
| to_intel_bo(obj)->ring, |
| 0, obj->write_domain); |
| BUG_ON(obj->write_domain); |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->read_domains, |
| old_write_domain); |
| |
| if (pipelined) |
| return 0; |
| |
| return i915_gem_object_wait_rendering(obj, true); |
| } |
| |
| /** Flushes the GTT write domain for the object if it's dirty. */ |
| static void |
| i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) |
| { |
| uint32_t old_write_domain; |
| |
| if (obj->write_domain != I915_GEM_DOMAIN_GTT) |
| return; |
| |
| /* No actual flushing is required for the GTT write domain. Writes |
| * to it immediately go to main memory as far as we know, so there's |
| * no chipset flush. It also doesn't land in render cache. |
| */ |
| old_write_domain = obj->write_domain; |
| obj->write_domain = 0; |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->read_domains, |
| old_write_domain); |
| } |
| |
| /** Flushes the CPU write domain for the object if it's dirty. */ |
| static void |
| i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| uint32_t old_write_domain; |
| |
| if (obj->write_domain != I915_GEM_DOMAIN_CPU) |
| return; |
| |
| i915_gem_clflush_object(obj); |
| drm_agp_chipset_flush(dev); |
| old_write_domain = obj->write_domain; |
| obj->write_domain = 0; |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->read_domains, |
| old_write_domain); |
| } |
| |
| /** |
| * Moves a single object to the GTT read, and possibly write domain. |
| * |
| * This function returns when the move is complete, including waiting on |
| * flushes to occur. |
| */ |
| int |
| i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| uint32_t old_write_domain, old_read_domains; |
| int ret; |
| |
| /* Not valid to be called on unbound objects. */ |
| if (obj_priv->gtt_space == NULL) |
| return -EINVAL; |
| |
| ret = i915_gem_object_flush_gpu_write_domain(obj, false); |
| if (ret != 0) |
| return ret; |
| |
| i915_gem_object_flush_cpu_write_domain(obj); |
| |
| if (write) { |
| ret = i915_gem_object_wait_rendering(obj, true); |
| if (ret) |
| return ret; |
| } |
| |
| old_write_domain = obj->write_domain; |
| old_read_domains = obj->read_domains; |
| |
| /* It should now be out of any other write domains, and we can update |
| * the domain values for our changes. |
| */ |
| BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); |
| obj->read_domains |= I915_GEM_DOMAIN_GTT; |
| if (write) { |
| obj->read_domains = I915_GEM_DOMAIN_GTT; |
| obj->write_domain = I915_GEM_DOMAIN_GTT; |
| obj_priv->dirty = 1; |
| } |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| old_write_domain); |
| |
| return 0; |
| } |
| |
| /* |
| * Prepare buffer for display plane. Use uninterruptible for possible flush |
| * wait, as in modesetting process we're not supposed to be interrupted. |
| */ |
| int |
| i915_gem_object_set_to_display_plane(struct drm_gem_object *obj, |
| bool pipelined) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| uint32_t old_read_domains; |
| int ret; |
| |
| /* Not valid to be called on unbound objects. */ |
| if (obj_priv->gtt_space == NULL) |
| return -EINVAL; |
| |
| ret = i915_gem_object_flush_gpu_write_domain(obj, true); |
| if (ret) |
| return ret; |
| |
| /* Currently, we are always called from an non-interruptible context. */ |
| if (!pipelined) { |
| ret = i915_gem_object_wait_rendering(obj, false); |
| if (ret) |
| return ret; |
| } |
| |
| i915_gem_object_flush_cpu_write_domain(obj); |
| |
| old_read_domains = obj->read_domains; |
| obj->read_domains |= I915_GEM_DOMAIN_GTT; |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| obj->write_domain); |
| |
| return 0; |
| } |
| |
| /** |
| * Moves a single object to the CPU read, and possibly write domain. |
| * |
| * This function returns when the move is complete, including waiting on |
| * flushes to occur. |
| */ |
| static int |
| i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) |
| { |
| uint32_t old_write_domain, old_read_domains; |
| int ret; |
| |
| ret = i915_gem_object_flush_gpu_write_domain(obj, false); |
| if (ret != 0) |
| return ret; |
| |
| i915_gem_object_flush_gtt_write_domain(obj); |
| |
| /* If we have a partially-valid cache of the object in the CPU, |
| * finish invalidating it and free the per-page flags. |
| */ |
| i915_gem_object_set_to_full_cpu_read_domain(obj); |
| |
| if (write) { |
| ret = i915_gem_object_wait_rendering(obj, true); |
| if (ret) |
| return ret; |
| } |
| |
| old_write_domain = obj->write_domain; |
| old_read_domains = obj->read_domains; |
| |
| /* Flush the CPU cache if it's still invalid. */ |
| if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { |
| i915_gem_clflush_object(obj); |
| |
| obj->read_domains |= I915_GEM_DOMAIN_CPU; |
| } |
| |
| /* It should now be out of any other write domains, and we can update |
| * the domain values for our changes. |
| */ |
| BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); |
| |
| /* If we're writing through the CPU, then the GPU read domains will |
| * need to be invalidated at next use. |
| */ |
| if (write) { |
| obj->read_domains = I915_GEM_DOMAIN_CPU; |
| obj->write_domain = I915_GEM_DOMAIN_CPU; |
| } |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| old_write_domain); |
| |
| return 0; |
| } |
| |
| /* |
| * Set the next domain for the specified object. This |
| * may not actually perform the necessary flushing/invaliding though, |
| * as that may want to be batched with other set_domain operations |
| * |
| * This is (we hope) the only really tricky part of gem. The goal |
| * is fairly simple -- track which caches hold bits of the object |
| * and make sure they remain coherent. A few concrete examples may |
| * help to explain how it works. For shorthand, we use the notation |
| * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the |
| * a pair of read and write domain masks. |
| * |
| * Case 1: the batch buffer |
| * |
| * 1. Allocated |
| * 2. Written by CPU |
| * 3. Mapped to GTT |
| * 4. Read by GPU |
| * 5. Unmapped from GTT |
| * 6. Freed |
| * |
| * Let's take these a step at a time |
| * |
| * 1. Allocated |
| * Pages allocated from the kernel may still have |
| * cache contents, so we set them to (CPU, CPU) always. |
| * 2. Written by CPU (using pwrite) |
| * The pwrite function calls set_domain (CPU, CPU) and |
| * this function does nothing (as nothing changes) |
| * 3. Mapped by GTT |
| * This function asserts that the object is not |
| * currently in any GPU-based read or write domains |
| * 4. Read by GPU |
| * i915_gem_execbuffer calls set_domain (COMMAND, 0). |
| * As write_domain is zero, this function adds in the |
| * current read domains (CPU+COMMAND, 0). |
| * flush_domains is set to CPU. |
| * invalidate_domains is set to COMMAND |
| * clflush is run to get data out of the CPU caches |
| * then i915_dev_set_domain calls i915_gem_flush to |
| * emit an MI_FLUSH and drm_agp_chipset_flush |
| * 5. Unmapped from GTT |
| * i915_gem_object_unbind calls set_domain (CPU, CPU) |
| * flush_domains and invalidate_domains end up both zero |
| * so no flushing/invalidating happens |
| * 6. Freed |
| * yay, done |
| * |
| * Case 2: The shared render buffer |
| * |
| * 1. Allocated |
| * 2. Mapped to GTT |
| * 3. Read/written by GPU |
| * 4. set_domain to (CPU,CPU) |
| * 5. Read/written by CPU |
| * 6. Read/written by GPU |
| * |
| * 1. Allocated |
| * Same as last example, (CPU, CPU) |
| * 2. Mapped to GTT |
| * Nothing changes (assertions find that it is not in the GPU) |
| * 3. Read/written by GPU |
| * execbuffer calls set_domain (RENDER, RENDER) |
| * flush_domains gets CPU |
| * invalidate_domains gets GPU |
| * clflush (obj) |
| * MI_FLUSH and drm_agp_chipset_flush |
| * 4. set_domain (CPU, CPU) |
| * flush_domains gets GPU |
| * invalidate_domains gets CPU |
| * wait_rendering (obj) to make sure all drawing is complete. |
| * This will include an MI_FLUSH to get the data from GPU |
| * to memory |
| * clflush (obj) to invalidate the CPU cache |
| * Another MI_FLUSH in i915_gem_flush (eliminate this somehow?) |
| * 5. Read/written by CPU |
| * cache lines are loaded and dirtied |
| * 6. Read written by GPU |
| * Same as last GPU access |
| * |
| * Case 3: The constant buffer |
| * |
| * 1. Allocated |
| * 2. Written by CPU |
| * 3. Read by GPU |
| * 4. Updated (written) by CPU again |
| * 5. Read by GPU |
| * |
| * 1. Allocated |
| * (CPU, CPU) |
| * 2. Written by CPU |
| * (CPU, CPU) |
| * 3. Read by GPU |
| * (CPU+RENDER, 0) |
| * flush_domains = CPU |
| * invalidate_domains = RENDER |
| * clflush (obj) |
| * MI_FLUSH |
| * drm_agp_chipset_flush |
| * 4. Updated (written) by CPU again |
| * (CPU, CPU) |
| * flush_domains = 0 (no previous write domain) |
| * invalidate_domains = 0 (no new read domains) |
| * 5. Read by GPU |
| * (CPU+RENDER, 0) |
| * flush_domains = CPU |
| * invalidate_domains = RENDER |
| * clflush (obj) |
| * MI_FLUSH |
| * drm_agp_chipset_flush |
| */ |
| static void |
| i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, |
| struct intel_ring_buffer *ring) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| uint32_t invalidate_domains = 0; |
| uint32_t flush_domains = 0; |
| |
| /* |
| * If the object isn't moving to a new write domain, |
| * let the object stay in multiple read domains |
| */ |
| if (obj->pending_write_domain == 0) |
| obj->pending_read_domains |= obj->read_domains; |
| |
| /* |
| * Flush the current write domain if |
| * the new read domains don't match. Invalidate |
| * any read domains which differ from the old |
| * write domain |
| */ |
| if (obj->write_domain && |
| obj->write_domain != obj->pending_read_domains) { |
| flush_domains |= obj->write_domain; |
| invalidate_domains |= |
| obj->pending_read_domains & ~obj->write_domain; |
| } |
| /* |
| * Invalidate any read caches which may have |
| * stale data. That is, any new read domains. |
| */ |
| invalidate_domains |= obj->pending_read_domains & ~obj->read_domains; |
| if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) |
| i915_gem_clflush_object(obj); |
| |
| /* The actual obj->write_domain will be updated with |
| * pending_write_domain after we emit the accumulated flush for all |
| * of our domain changes in execbuffers (which clears objects' |
| * write_domains). So if we have a current write domain that we |
| * aren't changing, set pending_write_domain to that. |
| */ |
| if (flush_domains == 0 && obj->pending_write_domain == 0) |
| obj->pending_write_domain = obj->write_domain; |
| |
| dev->invalidate_domains |= invalidate_domains; |
| dev->flush_domains |= flush_domains; |
| if (flush_domains & I915_GEM_GPU_DOMAINS) |
| dev_priv->mm.flush_rings |= obj_priv->ring->id; |
| if (invalidate_domains & I915_GEM_GPU_DOMAINS) |
| dev_priv->mm.flush_rings |= ring->id; |
| } |
| |
| /** |
| * Moves the object from a partially CPU read to a full one. |
| * |
| * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), |
| * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). |
| */ |
| static void |
| i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| if (!obj_priv->page_cpu_valid) |
| return; |
| |
| /* If we're partially in the CPU read domain, finish moving it in. |
| */ |
| if (obj->read_domains & I915_GEM_DOMAIN_CPU) { |
| int i; |
| |
| for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { |
| if (obj_priv->page_cpu_valid[i]) |
| continue; |
| drm_clflush_pages(obj_priv->pages + i, 1); |
| } |
| } |
| |
| /* Free the page_cpu_valid mappings which are now stale, whether |
| * or not we've got I915_GEM_DOMAIN_CPU. |
| */ |
| kfree(obj_priv->page_cpu_valid); |
| obj_priv->page_cpu_valid = NULL; |
| } |
| |
| /** |
| * Set the CPU read domain on a range of the object. |
| * |
| * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's |
| * not entirely valid. The page_cpu_valid member of the object flags which |
| * pages have been flushed, and will be respected by |
| * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping |
| * of the whole object. |
| * |
| * This function returns when the move is complete, including waiting on |
| * flushes to occur. |
| */ |
| static int |
| i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, |
| uint64_t offset, uint64_t size) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| uint32_t old_read_domains; |
| int i, ret; |
| |
| if (offset == 0 && size == obj->size) |
| return i915_gem_object_set_to_cpu_domain(obj, 0); |
| |
| ret = i915_gem_object_flush_gpu_write_domain(obj, false); |
| if (ret != 0) |
| return ret; |
| i915_gem_object_flush_gtt_write_domain(obj); |
| |
| /* If we're already fully in the CPU read domain, we're done. */ |
| if (obj_priv->page_cpu_valid == NULL && |
| (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) |
| return 0; |
| |
| /* Otherwise, create/clear the per-page CPU read domain flag if we're |
| * newly adding I915_GEM_DOMAIN_CPU |
| */ |
| if (obj_priv->page_cpu_valid == NULL) { |
| obj_priv->page_cpu_valid = kzalloc(obj->size / PAGE_SIZE, |
| GFP_KERNEL); |
| if (obj_priv->page_cpu_valid == NULL) |
| return -ENOMEM; |
| } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) |
| memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); |
| |
| /* Flush the cache on any pages that are still invalid from the CPU's |
| * perspective. |
| */ |
| for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; |
| i++) { |
| if (obj_priv->page_cpu_valid[i]) |
| continue; |
| |
| drm_clflush_pages(obj_priv->pages + i, 1); |
| |
| obj_priv->page_cpu_valid[i] = 1; |
| } |
| |
| /* It should now be out of any other write domains, and we can update |
| * the domain values for our changes. |
| */ |
| BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); |
| |
| old_read_domains = obj->read_domains; |
| obj->read_domains |= I915_GEM_DOMAIN_CPU; |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| obj->write_domain); |
| |
| return 0; |
| } |
| |
| /** |
| * Pin an object to the GTT and evaluate the relocations landing in it. |
| */ |
| static int |
| i915_gem_execbuffer_relocate(struct drm_i915_gem_object *obj, |
| struct drm_file *file_priv, |
| struct drm_i915_gem_exec_object2 *entry) |
| { |
| struct drm_device *dev = obj->base.dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_relocation_entry __user *user_relocs; |
| struct drm_gem_object *target_obj = NULL; |
| uint32_t target_handle = 0; |
| int i, ret = 0; |
| |
| user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr; |
| for (i = 0; i < entry->relocation_count; i++) { |
| struct drm_i915_gem_relocation_entry reloc; |
| uint32_t target_offset; |
| |
| if (__copy_from_user_inatomic(&reloc, |
| user_relocs+i, |
| sizeof(reloc))) { |
| ret = -EFAULT; |
| break; |
| } |
| |
| if (reloc.target_handle != target_handle) { |
| drm_gem_object_unreference(target_obj); |
| |
| target_obj = drm_gem_object_lookup(dev, file_priv, |
| reloc.target_handle); |
| if (target_obj == NULL) { |
| ret = -ENOENT; |
| break; |
| } |
| |
| target_handle = reloc.target_handle; |
| } |
| target_offset = to_intel_bo(target_obj)->gtt_offset; |
| |
| #if WATCH_RELOC |
| DRM_INFO("%s: obj %p offset %08x target %d " |
| "read %08x write %08x gtt %08x " |
| "presumed %08x delta %08x\n", |
| __func__, |
| obj, |
| (int) reloc.offset, |
| (int) reloc.target_handle, |
| (int) reloc.read_domains, |
| (int) reloc.write_domain, |
| (int) target_offset, |
| (int) reloc.presumed_offset, |
| reloc.delta); |
| #endif |
| |
| /* The target buffer should have appeared before us in the |
| * exec_object list, so it should have a GTT space bound by now. |
| */ |
| if (target_offset == 0) { |
| DRM_ERROR("No GTT space found for object %d\n", |
| reloc.target_handle); |
| ret = -EINVAL; |
| break; |
| } |
| |
| /* Validate that the target is in a valid r/w GPU domain */ |
| if (reloc.write_domain & (reloc.write_domain - 1)) { |
| DRM_ERROR("reloc with multiple write domains: " |
| "obj %p target %d offset %d " |
| "read %08x write %08x", |
| obj, reloc.target_handle, |
| (int) reloc.offset, |
| reloc.read_domains, |
| reloc.write_domain); |
| ret = -EINVAL; |
| break; |
| } |
| if (reloc.write_domain & I915_GEM_DOMAIN_CPU || |
| reloc.read_domains & I915_GEM_DOMAIN_CPU) { |
| DRM_ERROR("reloc with read/write CPU domains: " |
| "obj %p target %d offset %d " |
| "read %08x write %08x", |
| obj, reloc.target_handle, |
| (int) reloc.offset, |
| reloc.read_domains, |
| reloc.write_domain); |
| ret = -EINVAL; |
| break; |
| } |
| if (reloc.write_domain && target_obj->pending_write_domain && |
| reloc.write_domain != target_obj->pending_write_domain) { |
| DRM_ERROR("Write domain conflict: " |
| "obj %p target %d offset %d " |
| "new %08x old %08x\n", |
| obj, reloc.target_handle, |
| (int) reloc.offset, |
| reloc.write_domain, |
| target_obj->pending_write_domain); |
| ret = -EINVAL; |
| break; |
| } |
| |
| target_obj->pending_read_domains |= reloc.read_domains; |
| target_obj->pending_write_domain |= reloc.write_domain; |
| |
| /* If the relocation already has the right value in it, no |
| * more work needs to be done. |
| */ |
| if (target_offset == reloc.presumed_offset) |
| continue; |
| |
| /* Check that the relocation address is valid... */ |
| if (reloc.offset > obj->base.size - 4) { |
| DRM_ERROR("Relocation beyond object bounds: " |
| "obj %p target %d offset %d size %d.\n", |
| obj, reloc.target_handle, |
| (int) reloc.offset, (int) obj->base.size); |
| ret = -EINVAL; |
| break; |
| } |
| if (reloc.offset & 3) { |
| DRM_ERROR("Relocation not 4-byte aligned: " |
| "obj %p target %d offset %d.\n", |
| obj, reloc.target_handle, |
| (int) reloc.offset); |
| ret = -EINVAL; |
| break; |
| } |
| |
| /* and points to somewhere within the target object. */ |
| if (reloc.delta >= target_obj->size) { |
| DRM_ERROR("Relocation beyond target object bounds: " |
| "obj %p target %d delta %d size %d.\n", |
| obj, reloc.target_handle, |
| (int) reloc.delta, (int) target_obj->size); |
| ret = -EINVAL; |
| break; |
| } |
| |
| reloc.delta += target_offset; |
| if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) { |
| uint32_t page_offset = reloc.offset & ~PAGE_MASK; |
| char *vaddr; |
| |
| vaddr = kmap_atomic(obj->pages[reloc.offset >> PAGE_SHIFT]); |
| *(uint32_t *)(vaddr + page_offset) = reloc.delta; |
| kunmap_atomic(vaddr); |
| } else { |
| uint32_t __iomem *reloc_entry; |
| void __iomem *reloc_page; |
| |
| ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1); |
| if (ret) |
| break; |
| |
| /* Map the page containing the relocation we're going to perform. */ |
| reloc.offset += obj->gtt_offset; |
| reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, |
| reloc.offset & PAGE_MASK); |
| reloc_entry = (uint32_t __iomem *) |
| (reloc_page + (reloc.offset & ~PAGE_MASK)); |
| iowrite32(reloc.delta, reloc_entry); |
| io_mapping_unmap_atomic(reloc_page); |
| } |
| |
| /* and update the user's relocation entry */ |
| reloc.presumed_offset = target_offset; |
| if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset, |
| &reloc.presumed_offset, |
| sizeof(reloc.presumed_offset))) { |
| ret = -EFAULT; |
| break; |
| } |
| } |
| |
| drm_gem_object_unreference(target_obj); |
| return ret; |
| } |
| |
| static int |
| i915_gem_execbuffer_pin(struct drm_device *dev, |
| struct drm_file *file, |
| struct drm_gem_object **object_list, |
| struct drm_i915_gem_exec_object2 *exec_list, |
| int count) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret, i, retry; |
| |
| /* attempt to pin all of the buffers into the GTT */ |
| for (retry = 0; retry < 2; retry++) { |
| ret = 0; |
| for (i = 0; i < count; i++) { |
| struct drm_i915_gem_exec_object2 *entry = &exec_list[i]; |
| struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]); |
| bool need_fence = |
| entry->flags & EXEC_OBJECT_NEEDS_FENCE && |
| obj->tiling_mode != I915_TILING_NONE; |
| |
| /* g33/pnv can't fence buffers in the unmappable part */ |
| bool need_mappable = |
| entry->relocation_count ? true : need_fence; |
| |
| /* Check fence reg constraints and rebind if necessary */ |
| if (need_fence && |
| !i915_gem_object_fence_offset_ok(&obj->base, |
| obj->tiling_mode)) { |
| ret = i915_gem_object_unbind(&obj->base); |
| if (ret) |
| break; |
| } |
| |
| ret = i915_gem_object_pin(&obj->base, |
| entry->alignment, |
| need_mappable); |
| if (ret) |
| break; |
| |
| /* |
| * Pre-965 chips need a fence register set up in order |
| * to properly handle blits to/from tiled surfaces. |
| */ |
| if (need_fence) { |
| ret = i915_gem_object_get_fence_reg(&obj->base, true); |
| if (ret) { |
| i915_gem_object_unpin(&obj->base); |
| break; |
| } |
| |
| dev_priv->fence_regs[obj->fence_reg].gpu = true; |
| } |
| |
| entry->offset = obj->gtt_offset; |
| } |
| |
| while (i--) |
| i915_gem_object_unpin(object_list[i]); |
| |
| if (ret == 0) |
| break; |
| |
| if (ret != -ENOSPC || retry) |
| return ret; |
| |
| ret = i915_gem_evict_everything(dev); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Throttle our rendering by waiting until the ring has completed our requests |
| * emitted over 20 msec ago. |
| * |
| * Note that if we were to use the current jiffies each time around the loop, |
| * we wouldn't escape the function with any frames outstanding if the time to |
| * render a frame was over 20ms. |
| * |
| * This should get us reasonable parallelism between CPU and GPU but also |
| * relatively low latency when blocking on a particular request to finish. |
| */ |
| static int |
| i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| unsigned long recent_enough = jiffies - msecs_to_jiffies(20); |
| struct drm_i915_gem_request *request; |
| struct intel_ring_buffer *ring = NULL; |
| u32 seqno = 0; |
| int ret; |
| |
| spin_lock(&file_priv->mm.lock); |
| list_for_each_entry(request, &file_priv->mm.request_list, client_list) { |
| if (time_after_eq(request->emitted_jiffies, recent_enough)) |
| break; |
| |
| ring = request->ring; |
| seqno = request->seqno; |
| } |
| spin_unlock(&file_priv->mm.lock); |
| |
| if (seqno == 0) |
| return 0; |
| |
| ret = 0; |
| if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) { |
| /* And wait for the seqno passing without holding any locks and |
| * causing extra latency for others. This is safe as the irq |
| * generation is designed to be run atomically and so is |
| * lockless. |
| */ |
| ring->user_irq_get(ring); |
| ret = wait_event_interruptible(ring->irq_queue, |
| i915_seqno_passed(ring->get_seqno(ring), seqno) |
| || atomic_read(&dev_priv->mm.wedged)); |
| ring->user_irq_put(ring); |
| |
| if (ret == 0 && atomic_read(&dev_priv->mm.wedged)) |
| ret = -EIO; |
| } |
| |
| if (ret == 0) |
| queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, 0); |
| |
| return ret; |
| } |
| |
| static int |
| i915_gem_check_execbuffer(struct drm_i915_gem_execbuffer2 *exec, |
| uint64_t exec_offset) |
| { |
| uint32_t exec_start, exec_len; |
| |
| exec_start = (uint32_t) exec_offset + exec->batch_start_offset; |
| exec_len = (uint32_t) exec->batch_len; |
| |
| if ((exec_start | exec_len) & 0x7) |
| return -EINVAL; |
| |
| if (!exec_start) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int |
| validate_exec_list(struct drm_i915_gem_exec_object2 *exec, |
| int count) |
| { |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr; |
| size_t length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry); |
| |
| if (!access_ok(VERIFY_READ, ptr, length)) |
| return -EFAULT; |
| |
| /* we may also need to update the presumed offsets */ |
| if (!access_ok(VERIFY_WRITE, ptr, length)) |
| return -EFAULT; |
| |
| if (fault_in_pages_readable(ptr, length)) |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| i915_gem_do_execbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file, |
| struct drm_i915_gem_execbuffer2 *args, |
| struct drm_i915_gem_exec_object2 *exec_list) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_gem_object **object_list = NULL; |
| struct drm_gem_object *batch_obj; |
| struct drm_clip_rect *cliprects = NULL; |
| struct drm_i915_gem_request *request = NULL; |
| int ret, i, flips; |
| uint64_t exec_offset; |
| |
| struct intel_ring_buffer *ring = NULL; |
| |
| ret = i915_gem_check_is_wedged(dev); |
| if (ret) |
| return ret; |
| |
| ret = validate_exec_list(exec_list, args->buffer_count); |
| if (ret) |
| return ret; |
| |
| #if WATCH_EXEC |
| DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", |
| (int) args->buffers_ptr, args->buffer_count, args->batch_len); |
| #endif |
| switch (args->flags & I915_EXEC_RING_MASK) { |
| case I915_EXEC_DEFAULT: |
| case I915_EXEC_RENDER: |
| ring = &dev_priv->render_ring; |
| break; |
| case I915_EXEC_BSD: |
| if (!HAS_BSD(dev)) { |
| DRM_ERROR("execbuf with invalid ring (BSD)\n"); |
| return -EINVAL; |
| } |
| ring = &dev_priv->bsd_ring; |
| break; |
| case I915_EXEC_BLT: |
| if (!HAS_BLT(dev)) { |
| DRM_ERROR("execbuf with invalid ring (BLT)\n"); |
| return -EINVAL; |
| } |
| ring = &dev_priv->blt_ring; |
| break; |
| default: |
| DRM_ERROR("execbuf with unknown ring: %d\n", |
| (int)(args->flags & I915_EXEC_RING_MASK)); |
| return -EINVAL; |
| } |
| |
| if (args->buffer_count < 1) { |
| DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); |
| return -EINVAL; |
| } |
| object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count); |
| if (object_list == NULL) { |
| DRM_ERROR("Failed to allocate object list for %d buffers\n", |
| args->buffer_count); |
| ret = -ENOMEM; |
| goto pre_mutex_err; |
| } |
| |
| if (args->num_cliprects != 0) { |
| cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects), |
| GFP_KERNEL); |
| if (cliprects == NULL) { |
| ret = -ENOMEM; |
| goto pre_mutex_err; |
| } |
| |
| ret = copy_from_user(cliprects, |
| (struct drm_clip_rect __user *) |
| (uintptr_t) args->cliprects_ptr, |
| sizeof(*cliprects) * args->num_cliprects); |
| if (ret != 0) { |
| DRM_ERROR("copy %d cliprects failed: %d\n", |
| args->num_cliprects, ret); |
| ret = -EFAULT; |
| goto pre_mutex_err; |
| } |
| } |
| |
| request = kzalloc(sizeof(*request), GFP_KERNEL); |
| if (request == NULL) { |
| ret = -ENOMEM; |
| goto pre_mutex_err; |
| } |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| goto pre_mutex_err; |
| |
| if (dev_priv->mm.suspended) { |
| mutex_unlock(&dev->struct_mutex); |
| ret = -EBUSY; |
| goto pre_mutex_err; |
| } |
| |
| /* Look up object handles */ |
| for (i = 0; i < args->buffer_count; i++) { |
| struct drm_i915_gem_object *obj_priv; |
| |
| object_list[i] = drm_gem_object_lookup(dev, file, |
| exec_list[i].handle); |
| if (object_list[i] == NULL) { |
| DRM_ERROR("Invalid object handle %d at index %d\n", |
| exec_list[i].handle, i); |
| /* prevent error path from reading uninitialized data */ |
| args->buffer_count = i + 1; |
| ret = -ENOENT; |
| goto err; |
| } |
| |
| obj_priv = to_intel_bo(object_list[i]); |
| if (obj_priv->in_execbuffer) { |
| DRM_ERROR("Object %p appears more than once in object list\n", |
| object_list[i]); |
| /* prevent error path from reading uninitialized data */ |
| args->buffer_count = i + 1; |
| ret = -EINVAL; |
| goto err; |
| } |
| obj_priv->in_execbuffer = true; |
| } |
| |
| /* Move the objects en-masse into the GTT, evicting if necessary. */ |
| ret = i915_gem_execbuffer_pin(dev, file, |
| object_list, exec_list, |
| args->buffer_count); |
| if (ret) |
| goto err; |
| |
| /* The objects are in their final locations, apply the relocations. */ |
| for (i = 0; i < args->buffer_count; i++) { |
| struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]); |
| obj->base.pending_read_domains = 0; |
| obj->base.pending_write_domain = 0; |
| ret = i915_gem_execbuffer_relocate(obj, file, &exec_list[i]); |
| if (ret) |
| goto err; |
| } |
| |
| /* Set the pending read domains for the batch buffer to COMMAND */ |
| batch_obj = object_list[args->buffer_count-1]; |
| if (batch_obj->pending_write_domain) { |
| DRM_ERROR("Attempting to use self-modifying batch buffer\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| batch_obj->pending_read_domains |= I915_GEM_DOMAIN_COMMAND; |
| |
| /* Sanity check the batch buffer */ |
| exec_offset = to_intel_bo(batch_obj)->gtt_offset; |
| ret = i915_gem_check_execbuffer(args, exec_offset); |
| if (ret != 0) { |
| DRM_ERROR("execbuf with invalid offset/length\n"); |
| goto err; |
| } |
| |
| /* Zero the global flush/invalidate flags. These |
| * will be modified as new domains are computed |
| * for each object |
| */ |
| dev->invalidate_domains = 0; |
| dev->flush_domains = 0; |
| dev_priv->mm.flush_rings = 0; |
| for (i = 0; i < args->buffer_count; i++) |
| i915_gem_object_set_to_gpu_domain(object_list[i], ring); |
| |
| if (dev->invalidate_domains | dev->flush_domains) { |
| #if WATCH_EXEC |
| DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", |
| __func__, |
| dev->invalidate_domains, |
| dev->flush_domains); |
| #endif |
| i915_gem_flush(dev, file, |
| dev->invalidate_domains, |
| dev->flush_domains, |
| dev_priv->mm.flush_rings); |
| } |
| |
| #if WATCH_COHERENCY |
| for (i = 0; i < args->buffer_count; i++) { |
| i915_gem_object_check_coherency(object_list[i], |
| exec_list[i].handle); |
| } |
| #endif |
| |
| #if WATCH_EXEC |
| i915_gem_dump_object(batch_obj, |
| args->batch_len, |
| __func__, |
| ~0); |
| #endif |
| |
| /* Check for any pending flips. As we only maintain a flip queue depth |
| * of 1, we can simply insert a WAIT for the next display flip prior |
| * to executing the batch and avoid stalling the CPU. |
| */ |
| flips = 0; |
| for (i = 0; i < args->buffer_count; i++) { |
| if (object_list[i]->write_domain) |
| flips |= atomic_read(&to_intel_bo(object_list[i])->pending_flip); |
| } |
| if (flips) { |
| int plane, flip_mask; |
| |
| for (plane = 0; flips >> plane; plane++) { |
| if (((flips >> plane) & 1) == 0) |
| continue; |
| |
| if (plane) |
| flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; |
| else |
| flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; |
| |
| ret = intel_ring_begin(ring, 2); |
| if (ret) |
| goto err; |
| |
| intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask); |
| intel_ring_emit(ring, MI_NOOP); |
| intel_ring_advance(ring); |
| } |
| } |
| |
| /* Exec the batchbuffer */ |
| ret = ring->dispatch_execbuffer(ring, args, cliprects, exec_offset); |
| if (ret) { |
| DRM_ERROR("dispatch failed %d\n", ret); |
| goto err; |
| } |
| |
| for (i = 0; i < args->buffer_count; i++) { |
| struct drm_gem_object *obj = object_list[i]; |
| |
| obj->read_domains = obj->pending_read_domains; |
| obj->write_domain = obj->pending_write_domain; |
| |
| i915_gem_object_move_to_active(obj, ring); |
| if (obj->write_domain) { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| obj_priv->dirty = 1; |
| list_move_tail(&obj_priv->gpu_write_list, |
| &ring->gpu_write_list); |
| intel_mark_busy(dev, obj); |
| } |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->read_domains, |
| obj->write_domain); |
| } |
| |
| /* |
| * Ensure that the commands in the batch buffer are |
| * finished before the interrupt fires |
| */ |
| i915_retire_commands(dev, ring); |
| |
| if (i915_add_request(dev, file, request, ring)) |
| ring->outstanding_lazy_request = true; |
| else |
| request = NULL; |
| |
| err: |
| for (i = 0; i < args->buffer_count; i++) { |
| if (object_list[i] == NULL) |
| break; |
| |
| to_intel_bo(object_list[i])->in_execbuffer = false; |
| drm_gem_object_unreference(object_list[i]); |
| } |
| |
| mutex_unlock(&dev->struct_mutex); |
| |
| pre_mutex_err: |
| drm_free_large(object_list); |
| kfree(cliprects); |
| kfree(request); |
| |
| return ret; |
| } |
| |
| /* |
| * Legacy execbuffer just creates an exec2 list from the original exec object |
| * list array and passes it to the real function. |
| */ |
| int |
| i915_gem_execbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_execbuffer *args = data; |
| struct drm_i915_gem_execbuffer2 exec2; |
| struct drm_i915_gem_exec_object *exec_list = NULL; |
| struct drm_i915_gem_exec_object2 *exec2_list = NULL; |
| int ret, i; |
| |
| #if WATCH_EXEC |
| DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", |
| (int) args->buffers_ptr, args->buffer_count, args->batch_len); |
| #endif |
| |
| if (args->buffer_count < 1) { |
| DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); |
| return -EINVAL; |
| } |
| |
| /* Copy in the exec list from userland */ |
| exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count); |
| exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count); |
| if (exec_list == NULL || exec2_list == NULL) { |
| DRM_ERROR("Failed to allocate exec list for %d buffers\n", |
| args->buffer_count); |
| drm_free_large(exec_list); |
| drm_free_large(exec2_list); |
| return -ENOMEM; |
| } |
| ret = copy_from_user(exec_list, |
| (struct drm_i915_relocation_entry __user *) |
| (uintptr_t) args->buffers_ptr, |
| sizeof(*exec_list) * args->buffer_count); |
| if (ret != 0) { |
| DRM_ERROR("copy %d exec entries failed %d\n", |
| args->buffer_count, ret); |
| drm_free_large(exec_list); |
| drm_free_large(exec2_list); |
| return -EFAULT; |
| } |
| |
| for (i = 0; i < args->buffer_count; i++) { |
| exec2_list[i].handle = exec_list[i].handle; |
| exec2_list[i].relocation_count = exec_list[i].relocation_count; |
| exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr; |
| exec2_list[i].alignment = exec_list[i].alignment; |
| exec2_list[i].offset = exec_list[i].offset; |
| if (INTEL_INFO(dev)->gen < 4) |
| exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE; |
| else |
| exec2_list[i].flags = 0; |
| } |
| |
| exec2.buffers_ptr = args->buffers_ptr; |
| exec2.buffer_count = args->buffer_count; |
| exec2.batch_start_offset = args->batch_start_offset; |
| exec2.batch_len = args->batch_len; |
| exec2.DR1 = args->DR1; |
| exec2.DR4 = args->DR4; |
| exec2.num_cliprects = args->num_cliprects; |
| exec2.cliprects_ptr = args->cliprects_ptr; |
| exec2.flags = I915_EXEC_RENDER; |
| |
| ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list); |
| if (!ret) { |
| /* Copy the new buffer offsets back to the user's exec list. */ |
| for (i = 0; i < args->buffer_count; i++) |
| exec_list[i].offset = exec2_list[i].offset; |
| /* ... and back out to userspace */ |
| ret = copy_to_user((struct drm_i915_relocation_entry __user *) |
| (uintptr_t) args->buffers_ptr, |
| exec_list, |
| sizeof(*exec_list) * args->buffer_count); |
| if (ret) { |
| ret = -EFAULT; |
| DRM_ERROR("failed to copy %d exec entries " |
| "back to user (%d)\n", |
| args->buffer_count, ret); |
| } |
| } |
| |
| drm_free_large(exec_list); |
| drm_free_large(exec2_list); |
| return ret; |
| } |
| |
| int |
| i915_gem_execbuffer2(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_execbuffer2 *args = data; |
| struct drm_i915_gem_exec_object2 *exec2_list = NULL; |
| int ret; |
| |
| #if WATCH_EXEC |
| DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", |
| (int) args->buffers_ptr, args->buffer_count, args->batch_len); |
| #endif |
| |
| if (args->buffer_count < 1) { |
| DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count); |
| return -EINVAL; |
| } |
| |
| exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count); |
| if (exec2_list == NULL) { |
| DRM_ERROR("Failed to allocate exec list for %d buffers\n", |
| args->buffer_count); |
| return -ENOMEM; |
| } |
| ret = copy_from_user(exec2_list, |
| (struct drm_i915_relocation_entry __user *) |
| (uintptr_t) args->buffers_ptr, |
| sizeof(*exec2_list) * args->buffer_count); |
| if (ret != 0) { |
| DRM_ERROR("copy %d exec entries failed %d\n", |
| args->buffer_count, ret); |
| drm_free_large(exec2_list); |
| return -EFAULT; |
| } |
| |
| ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list); |
| if (!ret) { |
| /* Copy the new buffer offsets back to the user's exec list. */ |
| ret = copy_to_user((struct drm_i915_relocation_entry __user *) |
| (uintptr_t) args->buffers_ptr, |
| exec2_list, |
| sizeof(*exec2_list) * args->buffer_count); |
| if (ret) { |
| ret = -EFAULT; |
| DRM_ERROR("failed to copy %d exec entries " |
| "back to user (%d)\n", |
| args->buffer_count, ret); |
| } |
| } |
| |
| drm_free_large(exec2_list); |
| return ret; |
| } |
| |
| int |
| i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment, |
| bool mappable) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int ret; |
| |
| BUG_ON(obj_priv->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT); |
| WARN_ON(i915_verify_lists(dev)); |
| |
| if (obj_priv->gtt_space != NULL) { |
| if (alignment == 0) |
| alignment = i915_gem_get_gtt_alignment(obj); |
| if (obj_priv->gtt_offset & (alignment - 1) || |
| (mappable && !i915_gem_object_cpu_accessible(obj_priv))) { |
| WARN(obj_priv->pin_count, |
| "bo is already pinned with incorrect alignment:" |
| " offset=%x, req.alignment=%x\n", |
| obj_priv->gtt_offset, alignment); |
| ret = i915_gem_object_unbind(obj); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| if (obj_priv->gtt_space == NULL) { |
| ret = i915_gem_object_bind_to_gtt(obj, alignment, mappable); |
| if (ret) |
| return ret; |
| } |
| |
| obj_priv->pin_count++; |
| |
| /* If the object is not active and not pending a flush, |
| * remove it from the inactive list |
| */ |
| if (obj_priv->pin_count == 1) { |
| i915_gem_info_add_pin(dev_priv, obj, mappable); |
| if (!obj_priv->active) |
| list_move_tail(&obj_priv->mm_list, |
| &dev_priv->mm.pinned_list); |
| } |
| BUG_ON(!obj_priv->pin_mappable && mappable); |
| |
| WARN_ON(i915_verify_lists(dev)); |
| return 0; |
| } |
| |
| void |
| i915_gem_object_unpin(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| WARN_ON(i915_verify_lists(dev)); |
| obj_priv->pin_count--; |
| BUG_ON(obj_priv->pin_count < 0); |
| BUG_ON(obj_priv->gtt_space == NULL); |
| |
| /* If the object is no longer pinned, and is |
| * neither active nor being flushed, then stick it on |
| * the inactive list |
| */ |
| if (obj_priv->pin_count == 0) { |
| if (!obj_priv->active) |
| list_move_tail(&obj_priv->mm_list, |
| &dev_priv->mm.inactive_list); |
| i915_gem_info_remove_pin(dev_priv, obj); |
| } |
| WARN_ON(i915_verify_lists(dev)); |
| } |
| |
| int |
| i915_gem_pin_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_pin *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| if (obj_priv->madv != I915_MADV_WILLNEED) { |
| DRM_ERROR("Attempting to pin a purgeable buffer\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) { |
| DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n", |
| args->handle); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| obj_priv->user_pin_count++; |
| obj_priv->pin_filp = file_priv; |
| if (obj_priv->user_pin_count == 1) { |
| ret = i915_gem_object_pin(obj, args->alignment, true); |
| if (ret) |
| goto out; |
| } |
| |
| /* XXX - flush the CPU caches for pinned objects |
| * as the X server doesn't manage domains yet |
| */ |
| i915_gem_object_flush_cpu_write_domain(obj); |
| args->offset = obj_priv->gtt_offset; |
| out: |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| int |
| i915_gem_unpin_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_pin *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| if (obj_priv->pin_filp != file_priv) { |
| DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n", |
| args->handle); |
| ret = -EINVAL; |
| goto out; |
| } |
| obj_priv->user_pin_count--; |
| if (obj_priv->user_pin_count == 0) { |
| obj_priv->pin_filp = NULL; |
| i915_gem_object_unpin(obj); |
| } |
| |
| out: |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| int |
| i915_gem_busy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_busy *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| /* Count all active objects as busy, even if they are currently not used |
| * by the gpu. Users of this interface expect objects to eventually |
| * become non-busy without any further actions, therefore emit any |
| * necessary flushes here. |
| */ |
| args->busy = obj_priv->active; |
| if (args->busy) { |
| /* Unconditionally flush objects, even when the gpu still uses this |
| * object. Userspace calling this function indicates that it wants to |
| * use this buffer rather sooner than later, so issuing the required |
| * flush earlier is beneficial. |
| */ |
| if (obj->write_domain & I915_GEM_GPU_DOMAINS) |
| i915_gem_flush_ring(dev, file_priv, |
| obj_priv->ring, |
| 0, obj->write_domain); |
| |
| /* Update the active list for the hardware's current position. |
| * Otherwise this only updates on a delayed timer or when irqs |
| * are actually unmasked, and our working set ends up being |
| * larger than required. |
| */ |
| i915_gem_retire_requests_ring(dev, obj_priv->ring); |
| |
| args->busy = obj_priv->active; |
| } |
| |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| int |
| i915_gem_throttle_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| return i915_gem_ring_throttle(dev, file_priv); |
| } |
| |
| int |
| i915_gem_madvise_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_madvise *args = data; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret; |
| |
| switch (args->madv) { |
| case I915_MADV_DONTNEED: |
| case I915_MADV_WILLNEED: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
| if (obj == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| obj_priv = to_intel_bo(obj); |
| |
| if (obj_priv->pin_count) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (obj_priv->madv != __I915_MADV_PURGED) |
| obj_priv->madv = args->madv; |
| |
| /* if the object is no longer bound, discard its backing storage */ |
| if (i915_gem_object_is_purgeable(obj_priv) && |
| obj_priv->gtt_space == NULL) |
| i915_gem_object_truncate(obj); |
| |
| args->retained = obj_priv->madv != __I915_MADV_PURGED; |
| |
| out: |
| drm_gem_object_unreference(obj); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| struct drm_gem_object * i915_gem_alloc_object(struct drm_device *dev, |
| size_t size) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj; |
| |
| obj = kzalloc(sizeof(*obj), GFP_KERNEL); |
| if (obj == NULL) |
| return NULL; |
| |
| if (drm_gem_object_init(dev, &obj->base, size) != 0) { |
| kfree(obj); |
| return NULL; |
| } |
| |
| i915_gem_info_add_obj(dev_priv, size); |
| |
| obj->base.write_domain = I915_GEM_DOMAIN_CPU; |
| obj->base.read_domains = I915_GEM_DOMAIN_CPU; |
| |
| obj->agp_type = AGP_USER_MEMORY; |
| obj->base.driver_private = NULL; |
| obj->fence_reg = I915_FENCE_REG_NONE; |
| INIT_LIST_HEAD(&obj->mm_list); |
| INIT_LIST_HEAD(&obj->ring_list); |
| INIT_LIST_HEAD(&obj->gpu_write_list); |
| obj->madv = I915_MADV_WILLNEED; |
| |
| return &obj->base; |
| } |
| |
| int i915_gem_init_object(struct drm_gem_object *obj) |
| { |
| BUG(); |
| |
| return 0; |
| } |
| |
| static void i915_gem_free_object_tail(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| int ret; |
| |
| ret = i915_gem_object_unbind(obj); |
| if (ret == -ERESTARTSYS) { |
| list_move(&obj_priv->mm_list, |
| &dev_priv->mm.deferred_free_list); |
| return; |
| } |
| |
| if (obj->map_list.map) |
| i915_gem_free_mmap_offset(obj); |
| |
| drm_gem_object_release(obj); |
| i915_gem_info_remove_obj(dev_priv, obj->size); |
| |
| kfree(obj_priv->page_cpu_valid); |
| kfree(obj_priv->bit_17); |
| kfree(obj_priv); |
| } |
| |
| void i915_gem_free_object(struct drm_gem_object *obj) |
| { |
| struct drm_device *dev = obj->dev; |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| |
| trace_i915_gem_object_destroy(obj); |
| |
| while (obj_priv->pin_count > 0) |
| i915_gem_object_unpin(obj); |
| |
| if (obj_priv->phys_obj) |
| i915_gem_detach_phys_object(dev, obj); |
| |
| i915_gem_free_object_tail(obj); |
| } |
| |
| int |
| i915_gem_idle(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int ret; |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| if (dev_priv->mm.suspended) { |
| mutex_unlock(&dev->struct_mutex); |
| return 0; |
| } |
| |
| ret = i915_gpu_idle(dev); |
| if (ret) { |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /* Under UMS, be paranoid and evict. */ |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) { |
| ret = i915_gem_evict_inactive(dev); |
| if (ret) { |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| } |
| |
| /* Hack! Don't let anybody do execbuf while we don't control the chip. |
| * We need to replace this with a semaphore, or something. |
| * And not confound mm.suspended! |
| */ |
| dev_priv->mm.suspended = 1; |
| del_timer_sync(&dev_priv->hangcheck_timer); |
| |
| i915_kernel_lost_context(dev); |
| i915_gem_cleanup_ringbuffer(dev); |
| |
| mutex_unlock(&dev->struct_mutex); |
| |
| /* Cancel the retire work handler, which should be idle now. */ |
| cancel_delayed_work_sync(&dev_priv->mm.retire_work); |
| |
| return 0; |
| } |
| |
| /* |
| * 965+ support PIPE_CONTROL commands, which provide finer grained control |
| * over cache flushing. |
| */ |
| static int |
| i915_gem_init_pipe_control(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| int ret; |
| |
| obj = i915_gem_alloc_object(dev, 4096); |
| if (obj == NULL) { |
| DRM_ERROR("Failed to allocate seqno page\n"); |
| ret = -ENOMEM; |
| goto err; |
| } |
| obj_priv = to_intel_bo(obj); |
| obj_priv->agp_type = AGP_USER_CACHED_MEMORY; |
| |
| ret = i915_gem_object_pin(obj, 4096, true); |
| if (ret) |
| goto err_unref; |
| |
| dev_priv->seqno_gfx_addr = obj_priv->gtt_offset; |
| dev_priv->seqno_page = kmap(obj_priv->pages[0]); |
| if (dev_priv->seqno_page == NULL) |
| goto err_unpin; |
| |
| dev_priv->seqno_obj = obj; |
| memset(dev_priv->seqno_page, 0, PAGE_SIZE); |
| |
| return 0; |
| |
| err_unpin: |
| i915_gem_object_unpin(obj); |
| err_unref: |
| drm_gem_object_unreference(obj); |
| err: |
| return ret; |
| } |
| |
| |
| static void |
| i915_gem_cleanup_pipe_control(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_gem_object *obj; |
| struct drm_i915_gem_object *obj_priv; |
| |
| obj = dev_priv->seqno_obj; |
| obj_priv = to_intel_bo(obj); |
| kunmap(obj_priv->pages[0]); |
| i915_gem_object_unpin(obj); |
| drm_gem_object_unreference(obj); |
| dev_priv->seqno_obj = NULL; |
| |
| dev_priv->seqno_page = NULL; |
| } |
| |
| int |
| i915_gem_init_ringbuffer(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (HAS_PIPE_CONTROL(dev)) { |
| ret = i915_gem_init_pipe_control(dev); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_init_render_ring_buffer(dev); |
| if (ret) |
| goto cleanup_pipe_control; |
| |
| if (HAS_BSD(dev)) { |
| ret = intel_init_bsd_ring_buffer(dev); |
| if (ret) |
| goto cleanup_render_ring; |
| } |
| |
| if (HAS_BLT(dev)) { |
| ret = intel_init_blt_ring_buffer(dev); |
| if (ret) |
| goto cleanup_bsd_ring; |
| } |
| |
| dev_priv->next_seqno = 1; |
| |
| return 0; |
| |
| cleanup_bsd_ring: |
| intel_cleanup_ring_buffer(&dev_priv->bsd_ring); |
| cleanup_render_ring: |
| intel_cleanup_ring_buffer(&dev_priv->render_ring); |
| cleanup_pipe_control: |
| if (HAS_PIPE_CONTROL(dev)) |
| i915_gem_cleanup_pipe_control(dev); |
| return ret; |
| } |
| |
| void |
| i915_gem_cleanup_ringbuffer(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| intel_cleanup_ring_buffer(&dev_priv->render_ring); |
| intel_cleanup_ring_buffer(&dev_priv->bsd_ring); |
| intel_cleanup_ring_buffer(&dev_priv->blt_ring); |
| if (HAS_PIPE_CONTROL(dev)) |
| i915_gem_cleanup_pipe_control(dev); |
| } |
| |
| int |
| i915_gem_entervt_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return 0; |
| |
| if (atomic_read(&dev_priv->mm.wedged)) { |
| DRM_ERROR("Reenabling wedged hardware, good luck\n"); |
| atomic_set(&dev_priv->mm.wedged, 0); |
| } |
| |
| mutex_lock(&dev->struct_mutex); |
| dev_priv->mm.suspended = 0; |
| |
| ret = i915_gem_init_ringbuffer(dev); |
| if (ret != 0) { |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| BUG_ON(!list_empty(&dev_priv->mm.active_list)); |
| BUG_ON(!list_empty(&dev_priv->render_ring.active_list)); |
| BUG_ON(!list_empty(&dev_priv->bsd_ring.active_list)); |
| BUG_ON(!list_empty(&dev_priv->blt_ring.active_list)); |
| BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); |
| BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); |
| BUG_ON(!list_empty(&dev_priv->render_ring.request_list)); |
| BUG_ON(!list_empty(&dev_priv->bsd_ring.request_list)); |
| BUG_ON(!list_empty(&dev_priv->blt_ring.request_list)); |
| mutex_unlock(&dev->struct_mutex); |
| |
| ret = drm_irq_install(dev); |
| if (ret) |
| goto cleanup_ringbuffer; |
| |
| return 0; |
| |
| cleanup_ringbuffer: |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_cleanup_ringbuffer(dev); |
| dev_priv->mm.suspended = 1; |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| int |
| i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return 0; |
| |
| drm_irq_uninstall(dev); |
| return i915_gem_idle(dev); |
| } |
| |
| void |
| i915_gem_lastclose(struct drm_device *dev) |
| { |
| int ret; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return; |
| |
| ret = i915_gem_idle(dev); |
| if (ret) |
| DRM_ERROR("failed to idle hardware: %d\n", ret); |
| } |
| |
| static void |
| init_ring_lists(struct intel_ring_buffer *ring) |
| { |
| INIT_LIST_HEAD(&ring->active_list); |
| INIT_LIST_HEAD(&ring->request_list); |
| INIT_LIST_HEAD(&ring->gpu_write_list); |
| } |
| |
| void |
| i915_gem_load(struct drm_device *dev) |
| { |
| int i; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| INIT_LIST_HEAD(&dev_priv->mm.active_list); |
| INIT_LIST_HEAD(&dev_priv->mm.flushing_list); |
| INIT_LIST_HEAD(&dev_priv->mm.inactive_list); |
| INIT_LIST_HEAD(&dev_priv->mm.pinned_list); |
| INIT_LIST_HEAD(&dev_priv->mm.fence_list); |
| INIT_LIST_HEAD(&dev_priv->mm.deferred_free_list); |
| init_ring_lists(&dev_priv->render_ring); |
| init_ring_lists(&dev_priv->bsd_ring); |
| init_ring_lists(&dev_priv->blt_ring); |
| for (i = 0; i < 16; i++) |
| INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list); |
| INIT_DELAYED_WORK(&dev_priv->mm.retire_work, |
| i915_gem_retire_work_handler); |
| init_completion(&dev_priv->error_completion); |
| |
| /* On GEN3 we really need to make sure the ARB C3 LP bit is set */ |
| if (IS_GEN3(dev)) { |
| u32 tmp = I915_READ(MI_ARB_STATE); |
| if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) { |
| /* arb state is a masked write, so set bit + bit in mask */ |
| tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT); |
| I915_WRITE(MI_ARB_STATE, tmp); |
| } |
| } |
| |
| /* Old X drivers will take 0-2 for front, back, depth buffers */ |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| dev_priv->fence_reg_start = 3; |
| |
| if (INTEL_INFO(dev)->gen >= 4 || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) |
| dev_priv->num_fence_regs = 16; |
| else |
| dev_priv->num_fence_regs = 8; |
| |
| /* Initialize fence registers to zero */ |
| switch (INTEL_INFO(dev)->gen) { |
| case 6: |
| for (i = 0; i < 16; i++) |
| I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), 0); |
| break; |
| case 5: |
| case 4: |
| for (i = 0; i < 16; i++) |
| I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0); |
| break; |
| case 3: |
| if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) |
| for (i = 0; i < 8; i++) |
| I915_WRITE(FENCE_REG_945_8 + (i * 4), 0); |
| case 2: |
| for (i = 0; i < 8; i++) |
| I915_WRITE(FENCE_REG_830_0 + (i * 4), 0); |
| break; |
| } |
| i915_gem_detect_bit_6_swizzle(dev); |
| init_waitqueue_head(&dev_priv->pending_flip_queue); |
| |
| dev_priv->mm.inactive_shrinker.shrink = i915_gem_inactive_shrink; |
| dev_priv->mm.inactive_shrinker.seeks = DEFAULT_SEEKS; |
| register_shrinker(&dev_priv->mm.inactive_shrinker); |
| } |
| |
| /* |
| * Create a physically contiguous memory object for this object |
| * e.g. for cursor + overlay regs |
| */ |
| static int i915_gem_init_phys_object(struct drm_device *dev, |
| int id, int size, int align) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_phys_object *phys_obj; |
| int ret; |
| |
| if (dev_priv->mm.phys_objs[id - 1] || !size) |
| return 0; |
| |
| phys_obj = kzalloc(sizeof(struct drm_i915_gem_phys_object), GFP_KERNEL); |
| if (!phys_obj) |
| return -ENOMEM; |
| |
| phys_obj->id = id; |
| |
| phys_obj->handle = drm_pci_alloc(dev, size, align); |
| if (!phys_obj->handle) { |
| ret = -ENOMEM; |
| goto kfree_obj; |
| } |
| #ifdef CONFIG_X86 |
| set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE); |
| #endif |
| |
| dev_priv->mm.phys_objs[id - 1] = phys_obj; |
| |
| return 0; |
| kfree_obj: |
| kfree(phys_obj); |
| return ret; |
| } |
| |
| static void i915_gem_free_phys_object(struct drm_device *dev, int id) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_phys_object *phys_obj; |
| |
| if (!dev_priv->mm.phys_objs[id - 1]) |
| return; |
| |
| phys_obj = dev_priv->mm.phys_objs[id - 1]; |
| if (phys_obj->cur_obj) { |
| i915_gem_detach_phys_object(dev, phys_obj->cur_obj); |
| } |
| |
| #ifdef CONFIG_X86 |
| set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE); |
| #endif |
| drm_pci_free(dev, phys_obj->handle); |
| kfree(phys_obj); |
| dev_priv->mm.phys_objs[id - 1] = NULL; |
| } |
| |
| void i915_gem_free_all_phys_object(struct drm_device *dev) |
| { |
| int i; |
| |
| for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++) |
| i915_gem_free_phys_object(dev, i); |
| } |
| |
| void i915_gem_detach_phys_object(struct drm_device *dev, |
| struct drm_gem_object *obj) |
| { |
| struct drm_i915_gem_object *obj_priv; |
| int i; |
| int ret; |
| int page_count; |
| |
| obj_priv = to_intel_bo(obj); |
| if (!obj_priv->phys_obj) |
| return; |
| |
| ret = i915_gem_object_get_pages(obj, 0); |
| if (ret) |
| goto out; |
| |
| page_count = obj->size / PAGE_SIZE; |
| |
| for (i = 0; i < page_count; i++) { |
| char *dst = kmap_atomic(obj_priv->pages[i]); |
| char *src = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE); |
| |
| memcpy(dst, src, PAGE_SIZE); |
| kunmap_atomic(dst); |
| } |
| drm_clflush_pages(obj_priv->pages, page_count); |
| drm_agp_chipset_flush(dev); |
| |
| i915_gem_object_put_pages(obj); |
| out: |
| obj_priv->phys_obj->cur_obj = NULL; |
| obj_priv->phys_obj = NULL; |
| } |
| |
| int |
| i915_gem_attach_phys_object(struct drm_device *dev, |
| struct drm_gem_object *obj, |
| int id, |
| int align) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj_priv; |
| int ret = 0; |
| int page_count; |
| int i; |
| |
| if (id > I915_MAX_PHYS_OBJECT) |
| return -EINVAL; |
| |
| obj_priv = to_intel_bo(obj); |
| |
| if (obj_priv->phys_obj) { |
| if (obj_priv->phys_obj->id == id) |
| return 0; |
| i915_gem_detach_phys_object(dev, obj); |
| } |
| |
| /* create a new object */ |
| if (!dev_priv->mm.phys_objs[id - 1]) { |
| ret = i915_gem_init_phys_object(dev, id, |
| obj->size, align); |
| if (ret) { |
| DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size); |
| goto out; |
| } |
| } |
| |
| /* bind to the object */ |
| obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1]; |
| obj_priv->phys_obj->cur_obj = obj; |
| |
| ret = i915_gem_object_get_pages(obj, 0); |
| if (ret) { |
| DRM_ERROR("failed to get page list\n"); |
| goto out; |
| } |
| |
| page_count = obj->size / PAGE_SIZE; |
| |
| for (i = 0; i < page_count; i++) { |
| char *src = kmap_atomic(obj_priv->pages[i]); |
| char *dst = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE); |
| |
| memcpy(dst, src, PAGE_SIZE); |
| kunmap_atomic(src); |
| } |
| |
| i915_gem_object_put_pages(obj); |
| |
| return 0; |
| out: |
| return ret; |
| } |
| |
| static int |
| i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); |
| void *obj_addr; |
| int ret; |
| char __user *user_data; |
| |
| user_data = (char __user *) (uintptr_t) args->data_ptr; |
| obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset; |
| |
| DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size); |
| ret = copy_from_user(obj_addr, user_data, args->size); |
| if (ret) |
| return -EFAULT; |
| |
| drm_agp_chipset_flush(dev); |
| return 0; |
| } |
| |
| void i915_gem_release(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| /* Clean up our request list when the client is going away, so that |
| * later retire_requests won't dereference our soon-to-be-gone |
| * file_priv. |
| */ |
| spin_lock(&file_priv->mm.lock); |
| while (!list_empty(&file_priv->mm.request_list)) { |
| struct drm_i915_gem_request *request; |
| |
| request = list_first_entry(&file_priv->mm.request_list, |
| struct drm_i915_gem_request, |
| client_list); |
| list_del(&request->client_list); |
| request->file_priv = NULL; |
| } |
| spin_unlock(&file_priv->mm.lock); |
| } |
| |
| static int |
| i915_gpu_is_active(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int lists_empty; |
| |
| lists_empty = list_empty(&dev_priv->mm.flushing_list) && |
| list_empty(&dev_priv->mm.active_list); |
| |
| return !lists_empty; |
| } |
| |
| static int |
| i915_gem_inactive_shrink(struct shrinker *shrinker, |
| int nr_to_scan, |
| gfp_t gfp_mask) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(shrinker, |
| struct drm_i915_private, |
| mm.inactive_shrinker); |
| struct drm_device *dev = dev_priv->dev; |
| struct drm_i915_gem_object *obj, *next; |
| int cnt; |
| |
| if (!mutex_trylock(&dev->struct_mutex)) |
| return nr_to_scan ? 0 : -1; |
| |
| /* "fast-path" to count number of available objects */ |
| if (nr_to_scan == 0) { |
| cnt = 0; |
| list_for_each_entry(obj, |
| &dev_priv->mm.inactive_list, |
| mm_list) |
| cnt++; |
| mutex_unlock(&dev->struct_mutex); |
| return cnt / 100 * sysctl_vfs_cache_pressure; |
| } |
| |
| rescan: |
| /* first scan for clean buffers */ |
| i915_gem_retire_requests(dev); |
| |
| list_for_each_entry_safe(obj, next, |
| &dev_priv->mm.inactive_list, |
| mm_list) { |
| if (i915_gem_object_is_purgeable(obj)) { |
| i915_gem_object_unbind(&obj->base); |
| if (--nr_to_scan == 0) |
| break; |
| } |
| } |
| |
| /* second pass, evict/count anything still on the inactive list */ |
| cnt = 0; |
| list_for_each_entry_safe(obj, next, |
| &dev_priv->mm.inactive_list, |
| mm_list) { |
| if (nr_to_scan) { |
| i915_gem_object_unbind(&obj->base); |
| nr_to_scan--; |
| } else |
| cnt++; |
| } |
| |
| if (nr_to_scan && i915_gpu_is_active(dev)) { |
| /* |
| * We are desperate for pages, so as a last resort, wait |
| * for the GPU to finish and discard whatever we can. |
| * This has a dramatic impact to reduce the number of |
| * OOM-killer events whilst running the GPU aggressively. |
| */ |
| if (i915_gpu_idle(dev) == 0) |
| goto rescan; |
| } |
| mutex_unlock(&dev->struct_mutex); |
| return cnt / 100 * sysctl_vfs_cache_pressure; |
| } |