| #ifndef _ASM_POWERPC_CPUIDLE_H |
| #define _ASM_POWERPC_CPUIDLE_H |
| |
| #ifdef CONFIG_PPC_POWERNV |
| /* Used in powernv idle state management */ |
| #define PNV_THREAD_RUNNING 0 |
| #define PNV_THREAD_NAP 1 |
| #define PNV_THREAD_SLEEP 2 |
| #define PNV_THREAD_WINKLE 3 |
| #define PNV_CORE_IDLE_LOCK_BIT 0x100 |
| #define PNV_CORE_IDLE_THREAD_BITS 0x0FF |
| |
| /* |
| * ============================ NOTE ================================= |
| * The older firmware populates only the RL field in the psscr_val and |
| * sets the psscr_mask to 0xf. On such a firmware, the kernel sets the |
| * remaining PSSCR fields to default values as follows: |
| * |
| * - ESL and EC bits are to 1. So wakeup from any stop state will be |
| * at vector 0x100. |
| * |
| * - MTL and PSLL are set to the maximum allowed value as per the ISA, |
| * i.e. 15. |
| * |
| * - The Transition Rate, TR is set to the Maximum value 3. |
| */ |
| #define PSSCR_HV_DEFAULT_VAL (PSSCR_ESL | PSSCR_EC | \ |
| PSSCR_PSLL_MASK | PSSCR_TR_MASK | \ |
| PSSCR_MTL_MASK) |
| |
| #define PSSCR_HV_DEFAULT_MASK (PSSCR_ESL | PSSCR_EC | \ |
| PSSCR_PSLL_MASK | PSSCR_TR_MASK | \ |
| PSSCR_MTL_MASK | PSSCR_RL_MASK) |
| #define PSSCR_EC_SHIFT 20 |
| #define PSSCR_ESL_SHIFT 21 |
| #define GET_PSSCR_EC(x) (((x) & PSSCR_EC) >> PSSCR_EC_SHIFT) |
| #define GET_PSSCR_ESL(x) (((x) & PSSCR_ESL) >> PSSCR_ESL_SHIFT) |
| #define GET_PSSCR_RL(x) ((x) & PSSCR_RL_MASK) |
| |
| #define ERR_EC_ESL_MISMATCH -1 |
| #define ERR_DEEP_STATE_ESL_MISMATCH -2 |
| |
| #ifndef __ASSEMBLY__ |
| extern u32 pnv_fastsleep_workaround_at_entry[]; |
| extern u32 pnv_fastsleep_workaround_at_exit[]; |
| |
| extern u64 pnv_first_deep_stop_state; |
| |
| int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags); |
| static inline void report_invalid_psscr_val(u64 psscr_val, int err) |
| { |
| switch (err) { |
| case ERR_EC_ESL_MISMATCH: |
| pr_warn("Invalid psscr 0x%016llx : ESL,EC bits unequal", |
| psscr_val); |
| break; |
| case ERR_DEEP_STATE_ESL_MISMATCH: |
| pr_warn("Invalid psscr 0x%016llx : ESL cleared for deep stop-state", |
| psscr_val); |
| } |
| } |
| #endif |
| |
| #endif |
| |
| /* Idle state entry routines */ |
| #ifdef CONFIG_PPC_P7_NAP |
| #define IDLE_STATE_ENTER_SEQ(IDLE_INST) \ |
| /* Magic NAP/SLEEP/WINKLE mode enter sequence */ \ |
| std r0,0(r1); \ |
| ptesync; \ |
| ld r0,0(r1); \ |
| 1: cmpd cr0,r0,r0; \ |
| bne 1b; \ |
| IDLE_INST; \ |
| |
| #define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \ |
| IDLE_STATE_ENTER_SEQ(IDLE_INST) \ |
| b . |
| #endif /* CONFIG_PPC_P7_NAP */ |
| |
| #endif |