| /* |
| * Driver for the NXP ISP1761 device controller |
| * |
| * Copyright 2014 Ideas on Board Oy |
| * |
| * Contacts: |
| * Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/timer.h> |
| #include <linux/usb.h> |
| |
| #include "isp1760-core.h" |
| #include "isp1760-regs.h" |
| #include "isp1760-udc.h" |
| |
| #define ISP1760_VBUS_POLL_INTERVAL msecs_to_jiffies(500) |
| |
| struct isp1760_request { |
| struct usb_request req; |
| struct list_head queue; |
| struct isp1760_ep *ep; |
| unsigned int packet_size; |
| }; |
| |
| static inline struct isp1760_udc *gadget_to_udc(struct usb_gadget *gadget) |
| { |
| return container_of(gadget, struct isp1760_udc, gadget); |
| } |
| |
| static inline struct isp1760_ep *ep_to_udc_ep(struct usb_ep *ep) |
| { |
| return container_of(ep, struct isp1760_ep, ep); |
| } |
| |
| static inline struct isp1760_request *req_to_udc_req(struct usb_request *req) |
| { |
| return container_of(req, struct isp1760_request, req); |
| } |
| |
| static inline u32 isp1760_udc_read(struct isp1760_udc *udc, u16 reg) |
| { |
| return isp1760_read32(udc->regs, reg); |
| } |
| |
| static inline void isp1760_udc_write(struct isp1760_udc *udc, u16 reg, u32 val) |
| { |
| isp1760_write32(udc->regs, reg, val); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Endpoint Management |
| */ |
| |
| static struct isp1760_ep *isp1760_udc_find_ep(struct isp1760_udc *udc, |
| u16 index) |
| { |
| unsigned int i; |
| |
| if (index == 0) |
| return &udc->ep[0]; |
| |
| for (i = 1; i < ARRAY_SIZE(udc->ep); ++i) { |
| if (udc->ep[i].addr == index) |
| return udc->ep[i].desc ? &udc->ep[i] : NULL; |
| } |
| |
| return NULL; |
| } |
| |
| static void __isp1760_udc_select_ep(struct isp1760_ep *ep, int dir) |
| { |
| isp1760_udc_write(ep->udc, DC_EPINDEX, |
| DC_ENDPIDX(ep->addr & USB_ENDPOINT_NUMBER_MASK) | |
| (dir == USB_DIR_IN ? DC_EPDIR : 0)); |
| } |
| |
| /** |
| * isp1760_udc_select_ep - Select an endpoint for register access |
| * @ep: The endpoint |
| * |
| * The ISP1761 endpoint registers are banked. This function selects the target |
| * endpoint for banked register access. The selection remains valid until the |
| * next call to this function, the next direct access to the EPINDEX register |
| * or the next reset, whichever comes first. |
| * |
| * Called with the UDC spinlock held. |
| */ |
| static void isp1760_udc_select_ep(struct isp1760_ep *ep) |
| { |
| __isp1760_udc_select_ep(ep, ep->addr & USB_ENDPOINT_DIR_MASK); |
| } |
| |
| /* Called with the UDC spinlock held. */ |
| static void isp1760_udc_ctrl_send_status(struct isp1760_ep *ep, int dir) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| |
| /* |
| * Proceed to the status stage. The status stage data packet flows in |
| * the direction opposite to the data stage data packets, we thus need |
| * to select the OUT/IN endpoint for IN/OUT transfers. |
| */ |
| isp1760_udc_write(udc, DC_EPINDEX, DC_ENDPIDX(0) | |
| (dir == USB_DIR_IN ? 0 : DC_EPDIR)); |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_STATUS); |
| |
| /* |
| * The hardware will terminate the request automatically and go back to |
| * the setup stage without notifying us. |
| */ |
| udc->ep0_state = ISP1760_CTRL_SETUP; |
| } |
| |
| /* Called without the UDC spinlock held. */ |
| static void isp1760_udc_request_complete(struct isp1760_ep *ep, |
| struct isp1760_request *req, |
| int status) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| unsigned long flags; |
| |
| dev_dbg(ep->udc->isp->dev, "completing request %p with status %d\n", |
| req, status); |
| |
| req->ep = NULL; |
| req->req.status = status; |
| req->req.complete(&ep->ep, &req->req); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| /* |
| * When completing control OUT requests, move to the status stage after |
| * calling the request complete callback. This gives the gadget an |
| * opportunity to stall the control transfer if needed. |
| */ |
| if (status == 0 && ep->addr == 0 && udc->ep0_dir == USB_DIR_OUT) |
| isp1760_udc_ctrl_send_status(ep, USB_DIR_OUT); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| } |
| |
| static void isp1760_udc_ctrl_send_stall(struct isp1760_ep *ep) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| unsigned long flags; |
| |
| dev_dbg(ep->udc->isp->dev, "%s(ep%02x)\n", __func__, ep->addr); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| /* Stall both the IN and OUT endpoints. */ |
| __isp1760_udc_select_ep(ep, USB_DIR_OUT); |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_STALL); |
| __isp1760_udc_select_ep(ep, USB_DIR_IN); |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_STALL); |
| |
| /* A protocol stall completes the control transaction. */ |
| udc->ep0_state = ISP1760_CTRL_SETUP; |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Data Endpoints |
| */ |
| |
| /* Called with the UDC spinlock held. */ |
| static bool isp1760_udc_receive(struct isp1760_ep *ep, |
| struct isp1760_request *req) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| unsigned int len; |
| u32 *buf; |
| int i; |
| |
| isp1760_udc_select_ep(ep); |
| len = isp1760_udc_read(udc, DC_BUFLEN) & DC_DATACOUNT_MASK; |
| |
| dev_dbg(udc->isp->dev, "%s: received %u bytes (%u/%u done)\n", |
| __func__, len, req->req.actual, req->req.length); |
| |
| len = min(len, req->req.length - req->req.actual); |
| |
| if (!len) { |
| /* |
| * There's no data to be read from the FIFO, acknowledge the RX |
| * interrupt by clearing the buffer. |
| * |
| * TODO: What if another packet arrives in the meantime ? The |
| * datasheet doesn't clearly document how this should be |
| * handled. |
| */ |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_CLBUF); |
| return false; |
| } |
| |
| buf = req->req.buf + req->req.actual; |
| |
| /* |
| * Make sure not to read more than one extra byte, otherwise data from |
| * the next packet might be removed from the FIFO. |
| */ |
| for (i = len; i > 2; i -= 4, ++buf) |
| *buf = le32_to_cpu(isp1760_udc_read(udc, DC_DATAPORT)); |
| if (i > 0) |
| *(u16 *)buf = le16_to_cpu(readw(udc->regs + DC_DATAPORT)); |
| |
| req->req.actual += len; |
| |
| /* |
| * TODO: The short_not_ok flag isn't supported yet, but isn't used by |
| * any gadget driver either. |
| */ |
| |
| dev_dbg(udc->isp->dev, |
| "%s: req %p actual/length %u/%u maxpacket %u packet size %u\n", |
| __func__, req, req->req.actual, req->req.length, ep->maxpacket, |
| len); |
| |
| ep->rx_pending = false; |
| |
| /* |
| * Complete the request if all data has been received or if a short |
| * packet has been received. |
| */ |
| if (req->req.actual == req->req.length || len < ep->maxpacket) { |
| list_del(&req->queue); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void isp1760_udc_transmit(struct isp1760_ep *ep, |
| struct isp1760_request *req) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| u32 *buf = req->req.buf + req->req.actual; |
| int i; |
| |
| req->packet_size = min(req->req.length - req->req.actual, |
| ep->maxpacket); |
| |
| dev_dbg(udc->isp->dev, "%s: transferring %u bytes (%u/%u done)\n", |
| __func__, req->packet_size, req->req.actual, |
| req->req.length); |
| |
| __isp1760_udc_select_ep(ep, USB_DIR_IN); |
| |
| if (req->packet_size) |
| isp1760_udc_write(udc, DC_BUFLEN, req->packet_size); |
| |
| /* |
| * Make sure not to write more than one extra byte, otherwise extra data |
| * will stay in the FIFO and will be transmitted during the next control |
| * request. The endpoint control CLBUF bit is supposed to allow flushing |
| * the FIFO for this kind of conditions, but doesn't seem to work. |
| */ |
| for (i = req->packet_size; i > 2; i -= 4, ++buf) |
| isp1760_udc_write(udc, DC_DATAPORT, cpu_to_le32(*buf)); |
| if (i > 0) |
| writew(cpu_to_le16(*(u16 *)buf), udc->regs + DC_DATAPORT); |
| |
| if (ep->addr == 0) |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_DSEN); |
| if (!req->packet_size) |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_VENDP); |
| } |
| |
| static void isp1760_ep_rx_ready(struct isp1760_ep *ep) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| struct isp1760_request *req; |
| bool complete; |
| |
| spin_lock(&udc->lock); |
| |
| if (ep->addr == 0 && udc->ep0_state != ISP1760_CTRL_DATA_OUT) { |
| spin_unlock(&udc->lock); |
| dev_dbg(udc->isp->dev, "%s: invalid ep0 state %u\n", __func__, |
| udc->ep0_state); |
| return; |
| } |
| |
| if (ep->addr != 0 && !ep->desc) { |
| spin_unlock(&udc->lock); |
| dev_dbg(udc->isp->dev, "%s: ep%02x is disabled\n", __func__, |
| ep->addr); |
| return; |
| } |
| |
| if (list_empty(&ep->queue)) { |
| ep->rx_pending = true; |
| spin_unlock(&udc->lock); |
| dev_dbg(udc->isp->dev, "%s: ep%02x (%p) has no request queued\n", |
| __func__, ep->addr, ep); |
| return; |
| } |
| |
| req = list_first_entry(&ep->queue, struct isp1760_request, |
| queue); |
| complete = isp1760_udc_receive(ep, req); |
| |
| spin_unlock(&udc->lock); |
| |
| if (complete) |
| isp1760_udc_request_complete(ep, req, 0); |
| } |
| |
| static void isp1760_ep_tx_complete(struct isp1760_ep *ep) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| struct isp1760_request *complete = NULL; |
| struct isp1760_request *req; |
| bool need_zlp; |
| |
| spin_lock(&udc->lock); |
| |
| if (ep->addr == 0 && udc->ep0_state != ISP1760_CTRL_DATA_IN) { |
| spin_unlock(&udc->lock); |
| dev_dbg(udc->isp->dev, "TX IRQ: invalid endpoint state %u\n", |
| udc->ep0_state); |
| return; |
| } |
| |
| if (list_empty(&ep->queue)) { |
| /* |
| * This can happen for the control endpoint when the reply to |
| * the GET_STATUS IN control request is sent directly by the |
| * setup IRQ handler. Just proceed to the status stage. |
| */ |
| if (ep->addr == 0) { |
| isp1760_udc_ctrl_send_status(ep, USB_DIR_IN); |
| spin_unlock(&udc->lock); |
| return; |
| } |
| |
| spin_unlock(&udc->lock); |
| dev_dbg(udc->isp->dev, "%s: ep%02x has no request queued\n", |
| __func__, ep->addr); |
| return; |
| } |
| |
| req = list_first_entry(&ep->queue, struct isp1760_request, |
| queue); |
| req->req.actual += req->packet_size; |
| |
| need_zlp = req->req.actual == req->req.length && |
| !(req->req.length % ep->maxpacket) && |
| req->packet_size && req->req.zero; |
| |
| dev_dbg(udc->isp->dev, |
| "TX IRQ: req %p actual/length %u/%u maxpacket %u packet size %u zero %u need zlp %u\n", |
| req, req->req.actual, req->req.length, ep->maxpacket, |
| req->packet_size, req->req.zero, need_zlp); |
| |
| /* |
| * Complete the request if all data has been sent and we don't need to |
| * transmit a zero length packet. |
| */ |
| if (req->req.actual == req->req.length && !need_zlp) { |
| complete = req; |
| list_del(&req->queue); |
| |
| if (ep->addr == 0) |
| isp1760_udc_ctrl_send_status(ep, USB_DIR_IN); |
| |
| if (!list_empty(&ep->queue)) |
| req = list_first_entry(&ep->queue, |
| struct isp1760_request, queue); |
| else |
| req = NULL; |
| } |
| |
| /* |
| * Transmit the next packet or start the next request, if any. |
| * |
| * TODO: If the endpoint is stalled the next request shouldn't be |
| * started, but what about the next packet ? |
| */ |
| if (req) |
| isp1760_udc_transmit(ep, req); |
| |
| spin_unlock(&udc->lock); |
| |
| if (complete) |
| isp1760_udc_request_complete(ep, complete, 0); |
| } |
| |
| static int __isp1760_udc_set_halt(struct isp1760_ep *ep, bool halt) |
| { |
| struct isp1760_udc *udc = ep->udc; |
| |
| dev_dbg(udc->isp->dev, "%s: %s halt on ep%02x\n", __func__, |
| halt ? "set" : "clear", ep->addr); |
| |
| if (ep->desc && usb_endpoint_xfer_isoc(ep->desc)) { |
| dev_dbg(udc->isp->dev, "%s: ep%02x is isochronous\n", __func__, |
| ep->addr); |
| return -EINVAL; |
| } |
| |
| isp1760_udc_select_ep(ep); |
| isp1760_udc_write(udc, DC_CTRLFUNC, halt ? DC_STALL : 0); |
| |
| if (ep->addr == 0) { |
| /* When halting the control endpoint, stall both IN and OUT. */ |
| __isp1760_udc_select_ep(ep, USB_DIR_IN); |
| isp1760_udc_write(udc, DC_CTRLFUNC, halt ? DC_STALL : 0); |
| } else if (!halt) { |
| /* Reset the data PID by cycling the endpoint enable bit. */ |
| u16 eptype = isp1760_udc_read(udc, DC_EPTYPE); |
| |
| isp1760_udc_write(udc, DC_EPTYPE, eptype & ~DC_EPENABLE); |
| isp1760_udc_write(udc, DC_EPTYPE, eptype); |
| |
| /* |
| * Disabling the endpoint emptied the transmit FIFO, fill it |
| * again if a request is pending. |
| * |
| * TODO: Does the gadget framework require synchronizatino with |
| * the TX IRQ handler ? |
| */ |
| if ((ep->addr & USB_DIR_IN) && !list_empty(&ep->queue)) { |
| struct isp1760_request *req; |
| |
| req = list_first_entry(&ep->queue, |
| struct isp1760_request, queue); |
| isp1760_udc_transmit(ep, req); |
| } |
| } |
| |
| ep->halted = halt; |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Control Endpoint |
| */ |
| |
| static int isp1760_udc_get_status(struct isp1760_udc *udc, |
| const struct usb_ctrlrequest *req) |
| { |
| struct isp1760_ep *ep; |
| u16 status; |
| |
| if (req->wLength != cpu_to_le16(2) || req->wValue != cpu_to_le16(0)) |
| return -EINVAL; |
| |
| switch (req->bRequestType) { |
| case USB_DIR_IN | USB_RECIP_DEVICE: |
| status = udc->devstatus; |
| break; |
| |
| case USB_DIR_IN | USB_RECIP_INTERFACE: |
| status = 0; |
| break; |
| |
| case USB_DIR_IN | USB_RECIP_ENDPOINT: |
| ep = isp1760_udc_find_ep(udc, le16_to_cpu(req->wIndex)); |
| if (!ep) |
| return -EINVAL; |
| |
| status = 0; |
| if (ep->halted) |
| status |= 1 << USB_ENDPOINT_HALT; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| isp1760_udc_write(udc, DC_EPINDEX, DC_ENDPIDX(0) | DC_EPDIR); |
| isp1760_udc_write(udc, DC_BUFLEN, 2); |
| |
| writew(cpu_to_le16(status), udc->regs + DC_DATAPORT); |
| |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_DSEN); |
| |
| dev_dbg(udc->isp->dev, "%s: status 0x%04x\n", __func__, status); |
| |
| return 0; |
| } |
| |
| static int isp1760_udc_set_address(struct isp1760_udc *udc, u16 addr) |
| { |
| if (addr > 127) { |
| dev_dbg(udc->isp->dev, "invalid device address %u\n", addr); |
| return -EINVAL; |
| } |
| |
| if (udc->gadget.state != USB_STATE_DEFAULT && |
| udc->gadget.state != USB_STATE_ADDRESS) { |
| dev_dbg(udc->isp->dev, "can't set address in state %u\n", |
| udc->gadget.state); |
| return -EINVAL; |
| } |
| |
| usb_gadget_set_state(&udc->gadget, addr ? USB_STATE_ADDRESS : |
| USB_STATE_DEFAULT); |
| |
| isp1760_udc_write(udc, DC_ADDRESS, DC_DEVEN | addr); |
| |
| spin_lock(&udc->lock); |
| isp1760_udc_ctrl_send_status(&udc->ep[0], USB_DIR_OUT); |
| spin_unlock(&udc->lock); |
| |
| return 0; |
| } |
| |
| static bool isp1760_ep0_setup_standard(struct isp1760_udc *udc, |
| struct usb_ctrlrequest *req) |
| { |
| bool stall; |
| |
| switch (req->bRequest) { |
| case USB_REQ_GET_STATUS: |
| return isp1760_udc_get_status(udc, req); |
| |
| case USB_REQ_CLEAR_FEATURE: |
| switch (req->bRequestType) { |
| case USB_DIR_OUT | USB_RECIP_DEVICE: { |
| /* TODO: Handle remote wakeup feature. */ |
| return true; |
| } |
| |
| case USB_DIR_OUT | USB_RECIP_ENDPOINT: { |
| u16 index = le16_to_cpu(req->wIndex); |
| struct isp1760_ep *ep; |
| |
| if (req->wLength != cpu_to_le16(0) || |
| req->wValue != cpu_to_le16(USB_ENDPOINT_HALT)) |
| return true; |
| |
| ep = isp1760_udc_find_ep(udc, index); |
| if (!ep) |
| return true; |
| |
| spin_lock(&udc->lock); |
| |
| /* |
| * If the endpoint is wedged only the gadget can clear |
| * the halt feature. Pretend success in that case, but |
| * keep the endpoint halted. |
| */ |
| if (!ep->wedged) |
| stall = __isp1760_udc_set_halt(ep, false); |
| else |
| stall = false; |
| |
| if (!stall) |
| isp1760_udc_ctrl_send_status(&udc->ep[0], |
| USB_DIR_OUT); |
| |
| spin_unlock(&udc->lock); |
| return stall; |
| } |
| |
| default: |
| return true; |
| } |
| break; |
| |
| case USB_REQ_SET_FEATURE: |
| switch (req->bRequestType) { |
| case USB_DIR_OUT | USB_RECIP_DEVICE: { |
| /* TODO: Handle remote wakeup and test mode features */ |
| return true; |
| } |
| |
| case USB_DIR_OUT | USB_RECIP_ENDPOINT: { |
| u16 index = le16_to_cpu(req->wIndex); |
| struct isp1760_ep *ep; |
| |
| if (req->wLength != cpu_to_le16(0) || |
| req->wValue != cpu_to_le16(USB_ENDPOINT_HALT)) |
| return true; |
| |
| ep = isp1760_udc_find_ep(udc, index); |
| if (!ep) |
| return true; |
| |
| spin_lock(&udc->lock); |
| |
| stall = __isp1760_udc_set_halt(ep, true); |
| if (!stall) |
| isp1760_udc_ctrl_send_status(&udc->ep[0], |
| USB_DIR_OUT); |
| |
| spin_unlock(&udc->lock); |
| return stall; |
| } |
| |
| default: |
| return true; |
| } |
| break; |
| |
| case USB_REQ_SET_ADDRESS: |
| if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) |
| return true; |
| |
| return isp1760_udc_set_address(udc, le16_to_cpu(req->wValue)); |
| |
| case USB_REQ_SET_CONFIGURATION: |
| if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) |
| return true; |
| |
| if (udc->gadget.state != USB_STATE_ADDRESS && |
| udc->gadget.state != USB_STATE_CONFIGURED) |
| return true; |
| |
| stall = udc->driver->setup(&udc->gadget, req) < 0; |
| if (stall) |
| return true; |
| |
| usb_gadget_set_state(&udc->gadget, req->wValue ? |
| USB_STATE_CONFIGURED : USB_STATE_ADDRESS); |
| |
| /* |
| * SET_CONFIGURATION (and SET_INTERFACE) must reset the halt |
| * feature on all endpoints. There is however no need to do so |
| * explicitly here as the gadget driver will disable and |
| * reenable endpoints, clearing the halt feature. |
| */ |
| return false; |
| |
| default: |
| return udc->driver->setup(&udc->gadget, req) < 0; |
| } |
| } |
| |
| static void isp1760_ep0_setup(struct isp1760_udc *udc) |
| { |
| union { |
| struct usb_ctrlrequest r; |
| u32 data[2]; |
| } req; |
| unsigned int count; |
| bool stall = false; |
| |
| spin_lock(&udc->lock); |
| |
| isp1760_udc_write(udc, DC_EPINDEX, DC_EP0SETUP); |
| |
| count = isp1760_udc_read(udc, DC_BUFLEN) & DC_DATACOUNT_MASK; |
| if (count != sizeof(req)) { |
| spin_unlock(&udc->lock); |
| |
| dev_err(udc->isp->dev, "invalid length %u for setup packet\n", |
| count); |
| |
| isp1760_udc_ctrl_send_stall(&udc->ep[0]); |
| return; |
| } |
| |
| req.data[0] = isp1760_udc_read(udc, DC_DATAPORT); |
| req.data[1] = isp1760_udc_read(udc, DC_DATAPORT); |
| |
| if (udc->ep0_state != ISP1760_CTRL_SETUP) { |
| spin_unlock(&udc->lock); |
| dev_dbg(udc->isp->dev, "unexpected SETUP packet\n"); |
| return; |
| } |
| |
| /* Move to the data stage. */ |
| if (!req.r.wLength) |
| udc->ep0_state = ISP1760_CTRL_STATUS; |
| else if (req.r.bRequestType & USB_DIR_IN) |
| udc->ep0_state = ISP1760_CTRL_DATA_IN; |
| else |
| udc->ep0_state = ISP1760_CTRL_DATA_OUT; |
| |
| udc->ep0_dir = req.r.bRequestType & USB_DIR_IN; |
| udc->ep0_length = le16_to_cpu(req.r.wLength); |
| |
| spin_unlock(&udc->lock); |
| |
| dev_dbg(udc->isp->dev, |
| "%s: bRequestType 0x%02x bRequest 0x%02x wValue 0x%04x wIndex 0x%04x wLength 0x%04x\n", |
| __func__, req.r.bRequestType, req.r.bRequest, |
| le16_to_cpu(req.r.wValue), le16_to_cpu(req.r.wIndex), |
| le16_to_cpu(req.r.wLength)); |
| |
| if ((req.r.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) |
| stall = isp1760_ep0_setup_standard(udc, &req.r); |
| else |
| stall = udc->driver->setup(&udc->gadget, &req.r) < 0; |
| |
| if (stall) |
| isp1760_udc_ctrl_send_stall(&udc->ep[0]); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Gadget Endpoint Operations |
| */ |
| |
| static int isp1760_ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| struct isp1760_udc *udc = uep->udc; |
| unsigned long flags; |
| unsigned int type; |
| |
| dev_dbg(uep->udc->isp->dev, "%s\n", __func__); |
| |
| /* |
| * Validate the descriptor. The control endpoint can't be enabled |
| * manually. |
| */ |
| if (desc->bDescriptorType != USB_DT_ENDPOINT || |
| desc->bEndpointAddress == 0 || |
| desc->bEndpointAddress != uep->addr || |
| le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket) { |
| dev_dbg(udc->isp->dev, |
| "%s: invalid descriptor type %u addr %02x ep addr %02x max packet size %u/%u\n", |
| __func__, desc->bDescriptorType, |
| desc->bEndpointAddress, uep->addr, |
| le16_to_cpu(desc->wMaxPacketSize), ep->maxpacket); |
| return -EINVAL; |
| } |
| |
| switch (usb_endpoint_type(desc)) { |
| case USB_ENDPOINT_XFER_ISOC: |
| type = DC_ENDPTYP_ISOC; |
| break; |
| case USB_ENDPOINT_XFER_BULK: |
| type = DC_ENDPTYP_BULK; |
| break; |
| case USB_ENDPOINT_XFER_INT: |
| type = DC_ENDPTYP_INTERRUPT; |
| break; |
| case USB_ENDPOINT_XFER_CONTROL: |
| default: |
| dev_dbg(udc->isp->dev, "%s: control endpoints unsupported\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| uep->desc = desc; |
| uep->maxpacket = le16_to_cpu(desc->wMaxPacketSize); |
| uep->rx_pending = false; |
| uep->halted = false; |
| uep->wedged = false; |
| |
| isp1760_udc_select_ep(uep); |
| isp1760_udc_write(udc, DC_EPMAXPKTSZ, uep->maxpacket); |
| isp1760_udc_write(udc, DC_BUFLEN, uep->maxpacket); |
| isp1760_udc_write(udc, DC_EPTYPE, DC_EPENABLE | type); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int isp1760_ep_disable(struct usb_ep *ep) |
| { |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| struct isp1760_udc *udc = uep->udc; |
| struct isp1760_request *req, *nreq; |
| LIST_HEAD(req_list); |
| unsigned long flags; |
| |
| dev_dbg(udc->isp->dev, "%s\n", __func__); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| if (!uep->desc) { |
| dev_dbg(udc->isp->dev, "%s: endpoint not enabled\n", __func__); |
| spin_unlock_irqrestore(&udc->lock, flags); |
| return -EINVAL; |
| } |
| |
| uep->desc = NULL; |
| uep->maxpacket = 0; |
| |
| isp1760_udc_select_ep(uep); |
| isp1760_udc_write(udc, DC_EPTYPE, 0); |
| |
| /* TODO Synchronize with the IRQ handler */ |
| |
| list_splice_init(&uep->queue, &req_list); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| list_for_each_entry_safe(req, nreq, &req_list, queue) { |
| list_del(&req->queue); |
| isp1760_udc_request_complete(uep, req, -ESHUTDOWN); |
| } |
| |
| return 0; |
| } |
| |
| static struct usb_request *isp1760_ep_alloc_request(struct usb_ep *ep, |
| gfp_t gfp_flags) |
| { |
| struct isp1760_request *req; |
| |
| req = kzalloc(sizeof(*req), gfp_flags); |
| if (!req) |
| return NULL; |
| |
| return &req->req; |
| } |
| |
| static void isp1760_ep_free_request(struct usb_ep *ep, struct usb_request *_req) |
| { |
| struct isp1760_request *req = req_to_udc_req(_req); |
| |
| kfree(req); |
| } |
| |
| static int isp1760_ep_queue(struct usb_ep *ep, struct usb_request *_req, |
| gfp_t gfp_flags) |
| { |
| struct isp1760_request *req = req_to_udc_req(_req); |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| struct isp1760_udc *udc = uep->udc; |
| bool complete = false; |
| unsigned long flags; |
| int ret = 0; |
| |
| _req->status = -EINPROGRESS; |
| _req->actual = 0; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| dev_dbg(udc->isp->dev, |
| "%s: req %p (%u bytes%s) ep %p(0x%02x)\n", __func__, _req, |
| _req->length, _req->zero ? " (zlp)" : "", uep, uep->addr); |
| |
| req->ep = uep; |
| |
| if (uep->addr == 0) { |
| if (_req->length != udc->ep0_length && |
| udc->ep0_state != ISP1760_CTRL_DATA_IN) { |
| dev_dbg(udc->isp->dev, |
| "%s: invalid length %u for req %p\n", |
| __func__, _req->length, req); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| switch (udc->ep0_state) { |
| case ISP1760_CTRL_DATA_IN: |
| dev_dbg(udc->isp->dev, "%s: transmitting req %p\n", |
| __func__, req); |
| |
| list_add_tail(&req->queue, &uep->queue); |
| isp1760_udc_transmit(uep, req); |
| break; |
| |
| case ISP1760_CTRL_DATA_OUT: |
| list_add_tail(&req->queue, &uep->queue); |
| __isp1760_udc_select_ep(uep, USB_DIR_OUT); |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_DSEN); |
| break; |
| |
| case ISP1760_CTRL_STATUS: |
| complete = true; |
| break; |
| |
| default: |
| dev_dbg(udc->isp->dev, "%s: invalid ep0 state\n", |
| __func__); |
| ret = -EINVAL; |
| break; |
| } |
| } else if (uep->desc) { |
| bool empty = list_empty(&uep->queue); |
| |
| list_add_tail(&req->queue, &uep->queue); |
| if ((uep->addr & USB_DIR_IN) && !uep->halted && empty) |
| isp1760_udc_transmit(uep, req); |
| else if (!(uep->addr & USB_DIR_IN) && uep->rx_pending) |
| complete = isp1760_udc_receive(uep, req); |
| } else { |
| dev_dbg(udc->isp->dev, |
| "%s: can't queue request to disabled ep%02x\n", |
| __func__, uep->addr); |
| ret = -ESHUTDOWN; |
| } |
| |
| done: |
| if (ret < 0) |
| req->ep = NULL; |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (complete) |
| isp1760_udc_request_complete(uep, req, 0); |
| |
| return ret; |
| } |
| |
| static int isp1760_ep_dequeue(struct usb_ep *ep, struct usb_request *_req) |
| { |
| struct isp1760_request *req = req_to_udc_req(_req); |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| struct isp1760_udc *udc = uep->udc; |
| unsigned long flags; |
| |
| dev_dbg(uep->udc->isp->dev, "%s(ep%02x)\n", __func__, uep->addr); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| if (req->ep != uep) |
| req = NULL; |
| else |
| list_del(&req->queue); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (!req) |
| return -EINVAL; |
| |
| isp1760_udc_request_complete(uep, req, -ECONNRESET); |
| return 0; |
| } |
| |
| static int __isp1760_ep_set_halt(struct isp1760_ep *uep, bool stall, bool wedge) |
| { |
| struct isp1760_udc *udc = uep->udc; |
| int ret; |
| |
| if (!uep->addr) { |
| /* |
| * Halting the control endpoint is only valid as a delayed error |
| * response to a SETUP packet. Make sure EP0 is in the right |
| * stage and that the gadget isn't trying to clear the halt |
| * condition. |
| */ |
| if (WARN_ON(udc->ep0_state == ISP1760_CTRL_SETUP || !stall || |
| wedge)) { |
| return -EINVAL; |
| } |
| } |
| |
| if (uep->addr && !uep->desc) { |
| dev_dbg(udc->isp->dev, "%s: ep%02x is disabled\n", __func__, |
| uep->addr); |
| return -EINVAL; |
| } |
| |
| if (uep->addr & USB_DIR_IN) { |
| /* Refuse to halt IN endpoints with active transfers. */ |
| if (!list_empty(&uep->queue)) { |
| dev_dbg(udc->isp->dev, |
| "%s: ep%02x has request pending\n", __func__, |
| uep->addr); |
| return -EAGAIN; |
| } |
| } |
| |
| ret = __isp1760_udc_set_halt(uep, stall); |
| if (ret < 0) |
| return ret; |
| |
| if (!uep->addr) { |
| /* |
| * Stalling EP0 completes the control transaction, move back to |
| * the SETUP state. |
| */ |
| udc->ep0_state = ISP1760_CTRL_SETUP; |
| return 0; |
| } |
| |
| if (wedge) |
| uep->wedged = true; |
| else if (!stall) |
| uep->wedged = false; |
| |
| return 0; |
| } |
| |
| static int isp1760_ep_set_halt(struct usb_ep *ep, int value) |
| { |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| unsigned long flags; |
| int ret; |
| |
| dev_dbg(uep->udc->isp->dev, "%s: %s halt on ep%02x\n", __func__, |
| value ? "set" : "clear", uep->addr); |
| |
| spin_lock_irqsave(&uep->udc->lock, flags); |
| ret = __isp1760_ep_set_halt(uep, value, false); |
| spin_unlock_irqrestore(&uep->udc->lock, flags); |
| |
| return ret; |
| } |
| |
| static int isp1760_ep_set_wedge(struct usb_ep *ep) |
| { |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| unsigned long flags; |
| int ret; |
| |
| dev_dbg(uep->udc->isp->dev, "%s: set wedge on ep%02x)\n", __func__, |
| uep->addr); |
| |
| spin_lock_irqsave(&uep->udc->lock, flags); |
| ret = __isp1760_ep_set_halt(uep, true, true); |
| spin_unlock_irqrestore(&uep->udc->lock, flags); |
| |
| return ret; |
| } |
| |
| static void isp1760_ep_fifo_flush(struct usb_ep *ep) |
| { |
| struct isp1760_ep *uep = ep_to_udc_ep(ep); |
| struct isp1760_udc *udc = uep->udc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| isp1760_udc_select_ep(uep); |
| |
| /* |
| * Set the CLBUF bit twice to flush both buffers in case double |
| * buffering is enabled. |
| */ |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_CLBUF); |
| isp1760_udc_write(udc, DC_CTRLFUNC, DC_CLBUF); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| } |
| |
| static const struct usb_ep_ops isp1760_ep_ops = { |
| .enable = isp1760_ep_enable, |
| .disable = isp1760_ep_disable, |
| .alloc_request = isp1760_ep_alloc_request, |
| .free_request = isp1760_ep_free_request, |
| .queue = isp1760_ep_queue, |
| .dequeue = isp1760_ep_dequeue, |
| .set_halt = isp1760_ep_set_halt, |
| .set_wedge = isp1760_ep_set_wedge, |
| .fifo_flush = isp1760_ep_fifo_flush, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Device States |
| */ |
| |
| /* Called with the UDC spinlock held. */ |
| static void isp1760_udc_connect(struct isp1760_udc *udc) |
| { |
| usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED); |
| mod_timer(&udc->vbus_timer, jiffies + ISP1760_VBUS_POLL_INTERVAL); |
| } |
| |
| /* Called with the UDC spinlock held. */ |
| static void isp1760_udc_disconnect(struct isp1760_udc *udc) |
| { |
| if (udc->gadget.state < USB_STATE_POWERED) |
| return; |
| |
| dev_dbg(udc->isp->dev, "Device disconnected in state %u\n", |
| udc->gadget.state); |
| |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| usb_gadget_set_state(&udc->gadget, USB_STATE_ATTACHED); |
| |
| if (udc->driver->disconnect) |
| udc->driver->disconnect(&udc->gadget); |
| |
| del_timer(&udc->vbus_timer); |
| |
| /* TODO Reset all endpoints ? */ |
| } |
| |
| static void isp1760_udc_init_hw(struct isp1760_udc *udc) |
| { |
| /* |
| * The device controller currently shares its interrupt with the host |
| * controller, the DC_IRQ polarity and signaling mode are ignored. Set |
| * the to active-low level-triggered. |
| * |
| * Configure the control, in and out pipes to generate interrupts on |
| * ACK tokens only (and NYET for the out pipe). The default |
| * configuration also generates an interrupt on the first NACK token. |
| */ |
| isp1760_udc_write(udc, DC_INTCONF, DC_CDBGMOD_ACK | DC_DDBGMODIN_ACK | |
| DC_DDBGMODOUT_ACK_NYET); |
| |
| isp1760_udc_write(udc, DC_INTENABLE, DC_IEPRXTX(7) | DC_IEPRXTX(6) | |
| DC_IEPRXTX(5) | DC_IEPRXTX(4) | DC_IEPRXTX(3) | |
| DC_IEPRXTX(2) | DC_IEPRXTX(1) | DC_IEPRXTX(0) | |
| DC_IEP0SETUP | DC_IEVBUS | DC_IERESM | DC_IESUSP | |
| DC_IEHS_STA | DC_IEBRST); |
| |
| if (udc->connected) |
| isp1760_set_pullup(udc->isp, true); |
| |
| isp1760_udc_write(udc, DC_ADDRESS, DC_DEVEN); |
| } |
| |
| static void isp1760_udc_reset(struct isp1760_udc *udc) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| /* |
| * The bus reset has reset most registers to their default value, |
| * reinitialize the UDC hardware. |
| */ |
| isp1760_udc_init_hw(udc); |
| |
| udc->ep0_state = ISP1760_CTRL_SETUP; |
| udc->gadget.speed = USB_SPEED_FULL; |
| |
| usb_gadget_udc_reset(&udc->gadget, udc->driver); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| } |
| |
| static void isp1760_udc_suspend(struct isp1760_udc *udc) |
| { |
| if (udc->gadget.state < USB_STATE_DEFAULT) |
| return; |
| |
| if (udc->driver->suspend) |
| udc->driver->suspend(&udc->gadget); |
| } |
| |
| static void isp1760_udc_resume(struct isp1760_udc *udc) |
| { |
| if (udc->gadget.state < USB_STATE_DEFAULT) |
| return; |
| |
| if (udc->driver->resume) |
| udc->driver->resume(&udc->gadget); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Gadget Operations |
| */ |
| |
| static int isp1760_udc_get_frame(struct usb_gadget *gadget) |
| { |
| struct isp1760_udc *udc = gadget_to_udc(gadget); |
| |
| return isp1760_udc_read(udc, DC_FRAMENUM) & ((1 << 11) - 1); |
| } |
| |
| static int isp1760_udc_wakeup(struct usb_gadget *gadget) |
| { |
| struct isp1760_udc *udc = gadget_to_udc(gadget); |
| |
| dev_dbg(udc->isp->dev, "%s\n", __func__); |
| return -ENOTSUPP; |
| } |
| |
| static int isp1760_udc_set_selfpowered(struct usb_gadget *gadget, |
| int is_selfpowered) |
| { |
| struct isp1760_udc *udc = gadget_to_udc(gadget); |
| |
| if (is_selfpowered) |
| udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; |
| else |
| udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); |
| |
| return 0; |
| } |
| |
| static int isp1760_udc_pullup(struct usb_gadget *gadget, int is_on) |
| { |
| struct isp1760_udc *udc = gadget_to_udc(gadget); |
| |
| isp1760_set_pullup(udc->isp, is_on); |
| udc->connected = is_on; |
| |
| return 0; |
| } |
| |
| static int isp1760_udc_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct isp1760_udc *udc = gadget_to_udc(gadget); |
| unsigned long flags; |
| |
| /* The hardware doesn't support low speed. */ |
| if (driver->max_speed < USB_SPEED_FULL) { |
| dev_err(udc->isp->dev, "Invalid gadget driver\n"); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| if (udc->driver) { |
| dev_err(udc->isp->dev, "UDC already has a gadget driver\n"); |
| spin_unlock_irqrestore(&udc->lock, flags); |
| return -EBUSY; |
| } |
| |
| udc->driver = driver; |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| dev_dbg(udc->isp->dev, "starting UDC with driver %s\n", |
| driver->function); |
| |
| udc->devstatus = 0; |
| udc->connected = true; |
| |
| usb_gadget_set_state(&udc->gadget, USB_STATE_ATTACHED); |
| |
| /* DMA isn't supported yet, don't enable the DMA clock. */ |
| isp1760_udc_write(udc, DC_MODE, DC_GLINTENA); |
| |
| isp1760_udc_init_hw(udc); |
| |
| dev_dbg(udc->isp->dev, "UDC started with driver %s\n", |
| driver->function); |
| |
| return 0; |
| } |
| |
| static int isp1760_udc_stop(struct usb_gadget *gadget) |
| { |
| struct isp1760_udc *udc = gadget_to_udc(gadget); |
| unsigned long flags; |
| |
| dev_dbg(udc->isp->dev, "%s\n", __func__); |
| |
| del_timer_sync(&udc->vbus_timer); |
| |
| isp1760_udc_write(udc, DC_MODE, 0); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| udc->driver = NULL; |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| return 0; |
| } |
| |
| static struct usb_gadget_ops isp1760_udc_ops = { |
| .get_frame = isp1760_udc_get_frame, |
| .wakeup = isp1760_udc_wakeup, |
| .set_selfpowered = isp1760_udc_set_selfpowered, |
| .pullup = isp1760_udc_pullup, |
| .udc_start = isp1760_udc_start, |
| .udc_stop = isp1760_udc_stop, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Interrupt Handling |
| */ |
| |
| static irqreturn_t isp1760_udc_irq(int irq, void *dev) |
| { |
| struct isp1760_udc *udc = dev; |
| unsigned int i; |
| u32 status; |
| |
| status = isp1760_udc_read(udc, DC_INTERRUPT) |
| & isp1760_udc_read(udc, DC_INTENABLE); |
| isp1760_udc_write(udc, DC_INTERRUPT, status); |
| |
| if (status & DC_IEVBUS) { |
| dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__); |
| /* The VBUS interrupt is only triggered when VBUS appears. */ |
| spin_lock(&udc->lock); |
| isp1760_udc_connect(udc); |
| spin_unlock(&udc->lock); |
| } |
| |
| if (status & DC_IEBRST) { |
| dev_dbg(udc->isp->dev, "%s(BRST)\n", __func__); |
| |
| isp1760_udc_reset(udc); |
| } |
| |
| for (i = 0; i <= 7; ++i) { |
| struct isp1760_ep *ep = &udc->ep[i*2]; |
| |
| if (status & DC_IEPTX(i)) { |
| dev_dbg(udc->isp->dev, "%s(EPTX%u)\n", __func__, i); |
| isp1760_ep_tx_complete(ep); |
| } |
| |
| if (status & DC_IEPRX(i)) { |
| dev_dbg(udc->isp->dev, "%s(EPRX%u)\n", __func__, i); |
| isp1760_ep_rx_ready(i ? ep - 1 : ep); |
| } |
| } |
| |
| if (status & DC_IEP0SETUP) { |
| dev_dbg(udc->isp->dev, "%s(EP0SETUP)\n", __func__); |
| |
| isp1760_ep0_setup(udc); |
| } |
| |
| if (status & DC_IERESM) { |
| dev_dbg(udc->isp->dev, "%s(RESM)\n", __func__); |
| isp1760_udc_resume(udc); |
| } |
| |
| if (status & DC_IESUSP) { |
| dev_dbg(udc->isp->dev, "%s(SUSP)\n", __func__); |
| |
| spin_lock(&udc->lock); |
| if (!(isp1760_udc_read(udc, DC_MODE) & DC_VBUSSTAT)) |
| isp1760_udc_disconnect(udc); |
| else |
| isp1760_udc_suspend(udc); |
| spin_unlock(&udc->lock); |
| } |
| |
| if (status & DC_IEHS_STA) { |
| dev_dbg(udc->isp->dev, "%s(HS_STA)\n", __func__); |
| udc->gadget.speed = USB_SPEED_HIGH; |
| } |
| |
| return status ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| static void isp1760_udc_vbus_poll(unsigned long data) |
| { |
| struct isp1760_udc *udc = (struct isp1760_udc *)data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| if (!(isp1760_udc_read(udc, DC_MODE) & DC_VBUSSTAT)) |
| isp1760_udc_disconnect(udc); |
| else if (udc->gadget.state >= USB_STATE_POWERED) |
| mod_timer(&udc->vbus_timer, |
| jiffies + ISP1760_VBUS_POLL_INTERVAL); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Registration |
| */ |
| |
| static void isp1760_udc_init_eps(struct isp1760_udc *udc) |
| { |
| unsigned int i; |
| |
| INIT_LIST_HEAD(&udc->gadget.ep_list); |
| |
| for (i = 0; i < ARRAY_SIZE(udc->ep); ++i) { |
| struct isp1760_ep *ep = &udc->ep[i]; |
| unsigned int ep_num = (i + 1) / 2; |
| bool is_in = !(i & 1); |
| |
| ep->udc = udc; |
| |
| INIT_LIST_HEAD(&ep->queue); |
| |
| ep->addr = (ep_num && is_in ? USB_DIR_IN : USB_DIR_OUT) |
| | ep_num; |
| ep->desc = NULL; |
| |
| sprintf(ep->name, "ep%u%s", ep_num, |
| ep_num ? (is_in ? "in" : "out") : ""); |
| |
| ep->ep.ops = &isp1760_ep_ops; |
| ep->ep.name = ep->name; |
| |
| /* |
| * Hardcode the maximum packet sizes for now, to 64 bytes for |
| * the control endpoint and 512 bytes for all other endpoints. |
| * This fits in the 8kB FIFO without double-buffering. |
| */ |
| if (ep_num == 0) { |
| ep->ep.maxpacket = 64; |
| ep->maxpacket = 64; |
| udc->gadget.ep0 = &ep->ep; |
| } else { |
| ep->ep.maxpacket = 512; |
| ep->maxpacket = 0; |
| list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); |
| } |
| } |
| } |
| |
| static int isp1760_udc_init(struct isp1760_udc *udc) |
| { |
| u16 scratch; |
| u32 chipid; |
| |
| /* |
| * Check that the controller is present by writing to the scratch |
| * register, modifying the bus pattern by reading from the chip ID |
| * register, and reading the scratch register value back. The chip ID |
| * and scratch register contents must match the expected values. |
| */ |
| isp1760_udc_write(udc, DC_SCRATCH, 0xbabe); |
| chipid = isp1760_udc_read(udc, DC_CHIPID); |
| scratch = isp1760_udc_read(udc, DC_SCRATCH); |
| |
| if (scratch != 0xbabe) { |
| dev_err(udc->isp->dev, |
| "udc: scratch test failed (0x%04x/0x%08x)\n", |
| scratch, chipid); |
| return -ENODEV; |
| } |
| |
| if (chipid != 0x00011582 && chipid != 0x00158210) { |
| dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid); |
| return -ENODEV; |
| } |
| |
| /* Reset the device controller. */ |
| isp1760_udc_write(udc, DC_MODE, DC_SFRESET); |
| usleep_range(10000, 11000); |
| isp1760_udc_write(udc, DC_MODE, 0); |
| usleep_range(10000, 11000); |
| |
| return 0; |
| } |
| |
| int isp1760_udc_register(struct isp1760_device *isp, int irq, |
| unsigned long irqflags) |
| { |
| struct isp1760_udc *udc = &isp->udc; |
| const char *devname; |
| int ret; |
| |
| udc->irq = -1; |
| udc->isp = isp; |
| udc->regs = isp->regs; |
| |
| spin_lock_init(&udc->lock); |
| setup_timer(&udc->vbus_timer, isp1760_udc_vbus_poll, |
| (unsigned long)udc); |
| |
| ret = isp1760_udc_init(udc); |
| if (ret < 0) |
| return ret; |
| |
| devname = dev_name(isp->dev); |
| udc->irqname = kmalloc(strlen(devname) + 7, GFP_KERNEL); |
| if (!udc->irqname) |
| return -ENOMEM; |
| |
| sprintf(udc->irqname, "%s (udc)", devname); |
| |
| ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | irqflags, |
| udc->irqname, udc); |
| if (ret < 0) |
| goto error; |
| |
| udc->irq = irq; |
| |
| /* |
| * Initialize the gadget static fields and register its device. Gadget |
| * fields that vary during the life time of the gadget are initialized |
| * by the UDC core. |
| */ |
| udc->gadget.ops = &isp1760_udc_ops; |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| udc->gadget.max_speed = USB_SPEED_HIGH; |
| udc->gadget.name = "isp1761_udc"; |
| |
| isp1760_udc_init_eps(udc); |
| |
| ret = usb_add_gadget_udc(isp->dev, &udc->gadget); |
| if (ret < 0) |
| goto error; |
| |
| return 0; |
| |
| error: |
| if (udc->irq >= 0) |
| free_irq(udc->irq, udc); |
| kfree(udc->irqname); |
| |
| return ret; |
| } |
| |
| void isp1760_udc_unregister(struct isp1760_device *isp) |
| { |
| struct isp1760_udc *udc = &isp->udc; |
| |
| if (!udc->isp) |
| return; |
| |
| usb_del_gadget_udc(&udc->gadget); |
| |
| free_irq(udc->irq, udc); |
| kfree(udc->irqname); |
| } |