| /* |
| * linux/arch/arm/kernel/dec21285.c: PCI functions for DC21285 |
| * |
| * Copyright (C) 1998-2001 Russell King |
| * Copyright (C) 1998-2000 Phil Blundell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/ptrace.h> |
| #include <linux/interrupt.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/mach/pci.h> |
| #include <asm/hardware/dec21285.h> |
| |
| #define MAX_SLOTS 21 |
| |
| #define PCICMD_ABORT ((PCI_STATUS_REC_MASTER_ABORT| \ |
| PCI_STATUS_REC_TARGET_ABORT)<<16) |
| |
| #define PCICMD_ERROR_BITS ((PCI_STATUS_DETECTED_PARITY | \ |
| PCI_STATUS_REC_MASTER_ABORT | \ |
| PCI_STATUS_REC_TARGET_ABORT | \ |
| PCI_STATUS_PARITY) << 16) |
| |
| extern int setup_arm_irq(int, struct irqaction *); |
| extern void pcibios_report_status(u_int status_mask, int warn); |
| |
| static unsigned long |
| dc21285_base_address(struct pci_bus *bus, unsigned int devfn) |
| { |
| unsigned long addr = 0; |
| |
| if (bus->number == 0) { |
| if (PCI_SLOT(devfn) == 0) |
| /* |
| * For devfn 0, point at the 21285 |
| */ |
| addr = ARMCSR_BASE; |
| else { |
| devfn -= 1 << 3; |
| |
| if (devfn < PCI_DEVFN(MAX_SLOTS, 0)) |
| addr = PCICFG0_BASE | 0xc00000 | (devfn << 8); |
| } |
| } else |
| addr = PCICFG1_BASE | (bus->number << 16) | (devfn << 8); |
| |
| return addr; |
| } |
| |
| static int |
| dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 *value) |
| { |
| unsigned long addr = dc21285_base_address(bus, devfn); |
| u32 v = 0xffffffff; |
| |
| if (addr) |
| switch (size) { |
| case 1: |
| asm("ldrb %0, [%1, %2]" |
| : "=r" (v) : "r" (addr), "r" (where) : "cc"); |
| break; |
| case 2: |
| asm("ldrh %0, [%1, %2]" |
| : "=r" (v) : "r" (addr), "r" (where) : "cc"); |
| break; |
| case 4: |
| asm("ldr %0, [%1, %2]" |
| : "=r" (v) : "r" (addr), "r" (where) : "cc"); |
| break; |
| } |
| |
| *value = v; |
| |
| v = *CSR_PCICMD; |
| if (v & PCICMD_ABORT) { |
| *CSR_PCICMD = v & (0xffff|PCICMD_ABORT); |
| return -1; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 value) |
| { |
| unsigned long addr = dc21285_base_address(bus, devfn); |
| u32 v; |
| |
| if (addr) |
| switch (size) { |
| case 1: |
| asm("strb %0, [%1, %2]" |
| : : "r" (value), "r" (addr), "r" (where) |
| : "cc"); |
| break; |
| case 2: |
| asm("strh %0, [%1, %2]" |
| : : "r" (value), "r" (addr), "r" (where) |
| : "cc"); |
| break; |
| case 4: |
| asm("str %0, [%1, %2]" |
| : : "r" (value), "r" (addr), "r" (where) |
| : "cc"); |
| break; |
| } |
| |
| v = *CSR_PCICMD; |
| if (v & PCICMD_ABORT) { |
| *CSR_PCICMD = v & (0xffff|PCICMD_ABORT); |
| return -1; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops dc21285_ops = { |
| .read = dc21285_read_config, |
| .write = dc21285_write_config, |
| }; |
| |
| static struct timer_list serr_timer; |
| static struct timer_list perr_timer; |
| |
| static void dc21285_enable_error(unsigned long __data) |
| { |
| switch (__data) { |
| case IRQ_PCI_SERR: |
| del_timer(&serr_timer); |
| break; |
| |
| case IRQ_PCI_PERR: |
| del_timer(&perr_timer); |
| break; |
| } |
| |
| enable_irq(__data); |
| } |
| |
| /* |
| * Warn on PCI errors. |
| */ |
| static irqreturn_t dc21285_abort_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| unsigned int cmd; |
| unsigned int status; |
| |
| cmd = *CSR_PCICMD; |
| status = cmd >> 16; |
| cmd = cmd & 0xffff; |
| |
| if (status & PCI_STATUS_REC_MASTER_ABORT) { |
| printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", |
| instruction_pointer(regs)); |
| cmd |= PCI_STATUS_REC_MASTER_ABORT << 16; |
| } |
| |
| if (status & PCI_STATUS_REC_TARGET_ABORT) { |
| printk(KERN_DEBUG "PCI: target abort: "); |
| pcibios_report_status(PCI_STATUS_REC_MASTER_ABORT | |
| PCI_STATUS_SIG_TARGET_ABORT | |
| PCI_STATUS_REC_TARGET_ABORT, 1); |
| printk("\n"); |
| |
| cmd |= PCI_STATUS_REC_TARGET_ABORT << 16; |
| } |
| |
| *CSR_PCICMD = cmd; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dc21285_serr_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct timer_list *timer = dev_id; |
| unsigned int cntl; |
| |
| printk(KERN_DEBUG "PCI: system error received: "); |
| pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); |
| printk("\n"); |
| |
| cntl = *CSR_SA110_CNTL & 0xffffdf07; |
| *CSR_SA110_CNTL = cntl | SA110_CNTL_RXSERR; |
| |
| /* |
| * back off this interrupt |
| */ |
| disable_irq(irq); |
| timer->expires = jiffies + HZ; |
| add_timer(timer); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dc21285_discard_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| printk(KERN_DEBUG "PCI: discard timer expired\n"); |
| *CSR_SA110_CNTL &= 0xffffde07; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dc21285_dparity_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| unsigned int cmd; |
| |
| printk(KERN_DEBUG "PCI: data parity error detected: "); |
| pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1); |
| printk("\n"); |
| |
| cmd = *CSR_PCICMD & 0xffff; |
| *CSR_PCICMD = cmd | 1 << 24; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dc21285_parity_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct timer_list *timer = dev_id; |
| unsigned int cmd; |
| |
| printk(KERN_DEBUG "PCI: parity error detected: "); |
| pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1); |
| printk("\n"); |
| |
| cmd = *CSR_PCICMD & 0xffff; |
| *CSR_PCICMD = cmd | 1 << 31; |
| |
| /* |
| * back off this interrupt |
| */ |
| disable_irq(irq); |
| timer->expires = jiffies + HZ; |
| add_timer(timer); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int __init dc21285_setup(int nr, struct pci_sys_data *sys) |
| { |
| struct resource *res; |
| |
| if (nr || !footbridge_cfn_mode()) |
| return 0; |
| |
| res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); |
| if (!res) { |
| printk("out of memory for root bus resources"); |
| return 0; |
| } |
| |
| res[0].flags = IORESOURCE_MEM; |
| res[0].name = "Footbridge non-prefetch"; |
| res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; |
| res[1].name = "Footbridge prefetch"; |
| |
| allocate_resource(&iomem_resource, &res[1], 0x20000000, |
| 0xa0000000, 0xffffffff, 0x20000000, NULL, NULL); |
| allocate_resource(&iomem_resource, &res[0], 0x40000000, |
| 0x80000000, 0xffffffff, 0x40000000, NULL, NULL); |
| |
| sys->resource[0] = &ioport_resource; |
| sys->resource[1] = &res[0]; |
| sys->resource[2] = &res[1]; |
| sys->mem_offset = DC21285_PCI_MEM; |
| |
| return 1; |
| } |
| |
| struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys) |
| { |
| return pci_scan_bus(0, &dc21285_ops, sys); |
| } |
| |
| void __init dc21285_preinit(void) |
| { |
| unsigned int mem_size, mem_mask; |
| int cfn_mode; |
| |
| mem_size = (unsigned int)high_memory - PAGE_OFFSET; |
| for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) |
| if (mem_mask >= mem_size) |
| break; |
| |
| /* |
| * These registers need to be set up whether we're the |
| * central function or not. |
| */ |
| *CSR_SDRAMBASEMASK = (mem_mask - 1) & 0x0ffc0000; |
| *CSR_SDRAMBASEOFFSET = 0; |
| *CSR_ROMBASEMASK = 0x80000000; |
| *CSR_CSRBASEMASK = 0; |
| *CSR_CSRBASEOFFSET = 0; |
| *CSR_PCIADDR_EXTN = 0; |
| |
| cfn_mode = __footbridge_cfn_mode(); |
| |
| printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in " |
| "%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ? |
| "central function" : "addin"); |
| |
| if (footbridge_cfn_mode()) { |
| /* |
| * Clear any existing errors - we aren't |
| * interested in historical data... |
| */ |
| *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | |
| SA110_CNTL_RXSERR; |
| *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; |
| } |
| |
| init_timer(&serr_timer); |
| init_timer(&perr_timer); |
| |
| serr_timer.data = IRQ_PCI_SERR; |
| serr_timer.function = dc21285_enable_error; |
| perr_timer.data = IRQ_PCI_PERR; |
| perr_timer.function = dc21285_enable_error; |
| |
| /* |
| * We don't care if these fail. |
| */ |
| request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED, |
| "PCI system error", &serr_timer); |
| request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED, |
| "PCI parity error", &perr_timer); |
| request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED, |
| "PCI abort", NULL); |
| request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED, |
| "Discard timer", NULL); |
| request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED, |
| "PCI data parity", NULL); |
| |
| if (cfn_mode) { |
| static struct resource csrio; |
| |
| csrio.flags = IORESOURCE_IO; |
| csrio.name = "Footbridge"; |
| |
| allocate_resource(&ioport_resource, &csrio, 128, |
| 0xff00, 0xffff, 128, NULL, NULL); |
| |
| /* |
| * Map our SDRAM at a known address in PCI space, just in case |
| * the firmware had other ideas. Using a nonzero base is |
| * necessary, since some VGA cards forcefully use PCI addresses |
| * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). |
| */ |
| *CSR_PCICSRBASE = 0xf4000000; |
| *CSR_PCICSRIOBASE = csrio.start; |
| *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); |
| *CSR_PCIROMBASE = 0; |
| *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | |
| PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; |
| } else if (footbridge_cfn_mode() != 0) { |
| /* |
| * If we are not compiled to accept "add-in" mode, then |
| * we are using a constant virt_to_bus translation which |
| * can not hope to cater for the way the host BIOS has |
| * set up the machine. |
| */ |
| panic("PCI: this kernel is compiled for central " |
| "function mode only"); |
| } |
| } |
| |
| void __init dc21285_postinit(void) |
| { |
| register_isa_ports(DC21285_PCI_MEM, DC21285_PCI_IO, 0); |
| } |