| /******************************************************************************* |
| |
| Intel 10 Gigabit PCI Express Linux driver |
| Copyright(c) 1999 - 2013 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| Linux NICS <linux.nics@intel.com> |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| #include "ixgbe.h" |
| #include "ixgbe_sriov.h" |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /** |
| * ixgbe_cache_ring_dcb_sriov - Descriptor ring to register mapping for SR-IOV |
| * @adapter: board private structure to initialize |
| * |
| * Cache the descriptor ring offsets for SR-IOV to the assigned rings. It |
| * will also try to cache the proper offsets if RSS/FCoE are enabled along |
| * with VMDq. |
| * |
| **/ |
| static bool ixgbe_cache_ring_dcb_sriov(struct ixgbe_adapter *adapter) |
| { |
| #ifdef IXGBE_FCOE |
| struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE]; |
| #endif /* IXGBE_FCOE */ |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| int i; |
| u16 reg_idx; |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| |
| /* verify we have DCB queueing enabled before proceeding */ |
| if (tcs <= 1) |
| return false; |
| |
| /* verify we have VMDq enabled before proceeding */ |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return false; |
| |
| /* start at VMDq register offset for SR-IOV enabled setups */ |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); |
| for (i = 0; i < adapter->num_rx_queues; i++, reg_idx++) { |
| /* If we are greater than indices move to next pool */ |
| if ((reg_idx & ~vmdq->mask) >= tcs) |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); |
| adapter->rx_ring[i]->reg_idx = reg_idx; |
| } |
| |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); |
| for (i = 0; i < adapter->num_tx_queues; i++, reg_idx++) { |
| /* If we are greater than indices move to next pool */ |
| if ((reg_idx & ~vmdq->mask) >= tcs) |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); |
| adapter->tx_ring[i]->reg_idx = reg_idx; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* nothing to do if FCoE is disabled */ |
| if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) |
| return true; |
| |
| /* The work is already done if the FCoE ring is shared */ |
| if (fcoe->offset < tcs) |
| return true; |
| |
| /* The FCoE rings exist separately, we need to move their reg_idx */ |
| if (fcoe->indices) { |
| u16 queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask); |
| u8 fcoe_tc = ixgbe_fcoe_get_tc(adapter); |
| |
| reg_idx = (vmdq->offset + vmdq->indices) * queues_per_pool; |
| for (i = fcoe->offset; i < adapter->num_rx_queues; i++) { |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask) + fcoe_tc; |
| adapter->rx_ring[i]->reg_idx = reg_idx; |
| reg_idx++; |
| } |
| |
| reg_idx = (vmdq->offset + vmdq->indices) * queues_per_pool; |
| for (i = fcoe->offset; i < adapter->num_tx_queues; i++) { |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask) + fcoe_tc; |
| adapter->tx_ring[i]->reg_idx = reg_idx; |
| reg_idx++; |
| } |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| return true; |
| } |
| |
| /* ixgbe_get_first_reg_idx - Return first register index associated with ring */ |
| static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc, |
| unsigned int *tx, unsigned int *rx) |
| { |
| struct net_device *dev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u8 num_tcs = netdev_get_num_tc(dev); |
| |
| *tx = 0; |
| *rx = 0; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| /* TxQs/TC: 4 RxQs/TC: 8 */ |
| *tx = tc << 2; /* 0, 4, 8, 12, 16, 20, 24, 28 */ |
| *rx = tc << 3; /* 0, 8, 16, 24, 32, 40, 48, 56 */ |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| if (num_tcs > 4) { |
| /* |
| * TCs : TC0/1 TC2/3 TC4-7 |
| * TxQs/TC: 32 16 8 |
| * RxQs/TC: 16 16 16 |
| */ |
| *rx = tc << 4; |
| if (tc < 3) |
| *tx = tc << 5; /* 0, 32, 64 */ |
| else if (tc < 5) |
| *tx = (tc + 2) << 4; /* 80, 96 */ |
| else |
| *tx = (tc + 8) << 3; /* 104, 112, 120 */ |
| } else { |
| /* |
| * TCs : TC0 TC1 TC2/3 |
| * TxQs/TC: 64 32 16 |
| * RxQs/TC: 32 32 32 |
| */ |
| *rx = tc << 5; |
| if (tc < 2) |
| *tx = tc << 6; /* 0, 64 */ |
| else |
| *tx = (tc + 4) << 4; /* 96, 112 */ |
| } |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB |
| * @adapter: board private structure to initialize |
| * |
| * Cache the descriptor ring offsets for DCB to the assigned rings. |
| * |
| **/ |
| static bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *dev = adapter->netdev; |
| unsigned int tx_idx, rx_idx; |
| int tc, offset, rss_i, i; |
| u8 num_tcs = netdev_get_num_tc(dev); |
| |
| /* verify we have DCB queueing enabled before proceeding */ |
| if (num_tcs <= 1) |
| return false; |
| |
| rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| |
| for (tc = 0, offset = 0; tc < num_tcs; tc++, offset += rss_i) { |
| ixgbe_get_first_reg_idx(adapter, tc, &tx_idx, &rx_idx); |
| for (i = 0; i < rss_i; i++, tx_idx++, rx_idx++) { |
| adapter->tx_ring[offset + i]->reg_idx = tx_idx; |
| adapter->rx_ring[offset + i]->reg_idx = rx_idx; |
| adapter->tx_ring[offset + i]->dcb_tc = tc; |
| adapter->rx_ring[offset + i]->dcb_tc = tc; |
| } |
| } |
| |
| return true; |
| } |
| |
| #endif |
| /** |
| * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov |
| * @adapter: board private structure to initialize |
| * |
| * SR-IOV doesn't use any descriptor rings but changes the default if |
| * no other mapping is used. |
| * |
| */ |
| static bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter) |
| { |
| #ifdef IXGBE_FCOE |
| struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE]; |
| #endif /* IXGBE_FCOE */ |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| struct ixgbe_ring_feature *rss = &adapter->ring_feature[RING_F_RSS]; |
| int i; |
| u16 reg_idx; |
| |
| /* only proceed if VMDq is enabled */ |
| if (!(adapter->flags & IXGBE_FLAG_VMDQ_ENABLED)) |
| return false; |
| |
| /* start at VMDq register offset for SR-IOV enabled setups */ |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); |
| for (i = 0; i < adapter->num_rx_queues; i++, reg_idx++) { |
| #ifdef IXGBE_FCOE |
| /* Allow first FCoE queue to be mapped as RSS */ |
| if (fcoe->offset && (i > fcoe->offset)) |
| break; |
| #endif |
| /* If we are greater than indices move to next pool */ |
| if ((reg_idx & ~vmdq->mask) >= rss->indices) |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); |
| adapter->rx_ring[i]->reg_idx = reg_idx; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE uses a linear block of queues so just assigning 1:1 */ |
| for (; i < adapter->num_rx_queues; i++, reg_idx++) |
| adapter->rx_ring[i]->reg_idx = reg_idx; |
| |
| #endif |
| reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask); |
| for (i = 0; i < adapter->num_tx_queues; i++, reg_idx++) { |
| #ifdef IXGBE_FCOE |
| /* Allow first FCoE queue to be mapped as RSS */ |
| if (fcoe->offset && (i > fcoe->offset)) |
| break; |
| #endif |
| /* If we are greater than indices move to next pool */ |
| if ((reg_idx & rss->mask) >= rss->indices) |
| reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask); |
| adapter->tx_ring[i]->reg_idx = reg_idx; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE uses a linear block of queues so just assigning 1:1 */ |
| for (; i < adapter->num_tx_queues; i++, reg_idx++) |
| adapter->tx_ring[i]->reg_idx = reg_idx; |
| |
| #endif |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS |
| * @adapter: board private structure to initialize |
| * |
| * Cache the descriptor ring offsets for RSS to the assigned rings. |
| * |
| **/ |
| static bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| adapter->rx_ring[i]->reg_idx = i; |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| adapter->tx_ring[i]->reg_idx = i; |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_cache_ring_register - Descriptor ring to register mapping |
| * @adapter: board private structure to initialize |
| * |
| * Once we know the feature-set enabled for the device, we'll cache |
| * the register offset the descriptor ring is assigned to. |
| * |
| * Note, the order the various feature calls is important. It must start with |
| * the "most" features enabled at the same time, then trickle down to the |
| * least amount of features turned on at once. |
| **/ |
| static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) |
| { |
| /* start with default case */ |
| adapter->rx_ring[0]->reg_idx = 0; |
| adapter->tx_ring[0]->reg_idx = 0; |
| |
| #ifdef CONFIG_IXGBE_DCB |
| if (ixgbe_cache_ring_dcb_sriov(adapter)) |
| return; |
| |
| if (ixgbe_cache_ring_dcb(adapter)) |
| return; |
| |
| #endif |
| if (ixgbe_cache_ring_sriov(adapter)) |
| return; |
| |
| ixgbe_cache_ring_rss(adapter); |
| } |
| |
| #define IXGBE_RSS_16Q_MASK 0xF |
| #define IXGBE_RSS_8Q_MASK 0x7 |
| #define IXGBE_RSS_4Q_MASK 0x3 |
| #define IXGBE_RSS_2Q_MASK 0x1 |
| #define IXGBE_RSS_DISABLED_MASK 0x0 |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /** |
| * ixgbe_set_dcb_sriov_queues: Allocate queues for SR-IOV devices w/ DCB |
| * @adapter: board private structure to initialize |
| * |
| * When SR-IOV (Single Root IO Virtualiztion) is enabled, allocate queues |
| * and VM pools where appropriate. Also assign queues based on DCB |
| * priorities and map accordingly.. |
| * |
| **/ |
| static bool ixgbe_set_dcb_sriov_queues(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit; |
| u16 vmdq_m = 0; |
| #ifdef IXGBE_FCOE |
| u16 fcoe_i = 0; |
| #endif |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| |
| /* verify we have DCB queueing enabled before proceeding */ |
| if (tcs <= 1) |
| return false; |
| |
| /* verify we have VMDq enabled before proceeding */ |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return false; |
| |
| /* Add starting offset to total pool count */ |
| vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset; |
| |
| /* 16 pools w/ 8 TC per pool */ |
| if (tcs > 4) { |
| vmdq_i = min_t(u16, vmdq_i, 16); |
| vmdq_m = IXGBE_82599_VMDQ_8Q_MASK; |
| /* 32 pools w/ 4 TC per pool */ |
| } else { |
| vmdq_i = min_t(u16, vmdq_i, 32); |
| vmdq_m = IXGBE_82599_VMDQ_4Q_MASK; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* queues in the remaining pools are available for FCoE */ |
| fcoe_i = (128 / __ALIGN_MASK(1, ~vmdq_m)) - vmdq_i; |
| |
| #endif |
| /* remove the starting offset from the pool count */ |
| vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset; |
| |
| /* save features for later use */ |
| adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i; |
| adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m; |
| |
| /* |
| * We do not support DCB, VMDq, and RSS all simultaneously |
| * so we will disable RSS since it is the lowest priority |
| */ |
| adapter->ring_feature[RING_F_RSS].indices = 1; |
| adapter->ring_feature[RING_F_RSS].mask = IXGBE_RSS_DISABLED_MASK; |
| |
| /* disable ATR as it is not supported when VMDq is enabled */ |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| |
| adapter->num_rx_pools = vmdq_i; |
| adapter->num_rx_queues_per_pool = tcs; |
| |
| adapter->num_tx_queues = vmdq_i * tcs; |
| adapter->num_rx_queues = vmdq_i * tcs; |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { |
| struct ixgbe_ring_feature *fcoe; |
| |
| fcoe = &adapter->ring_feature[RING_F_FCOE]; |
| |
| /* limit ourselves based on feature limits */ |
| fcoe_i = min_t(u16, fcoe_i, fcoe->limit); |
| |
| if (fcoe_i) { |
| /* alloc queues for FCoE separately */ |
| fcoe->indices = fcoe_i; |
| fcoe->offset = vmdq_i * tcs; |
| |
| /* add queues to adapter */ |
| adapter->num_tx_queues += fcoe_i; |
| adapter->num_rx_queues += fcoe_i; |
| } else if (tcs > 1) { |
| /* use queue belonging to FcoE TC */ |
| fcoe->indices = 1; |
| fcoe->offset = ixgbe_fcoe_get_tc(adapter); |
| } else { |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; |
| |
| fcoe->indices = 0; |
| fcoe->offset = 0; |
| } |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| /* configure TC to queue mapping */ |
| for (i = 0; i < tcs; i++) |
| netdev_set_tc_queue(adapter->netdev, i, 1, i); |
| |
| return true; |
| } |
| |
| static bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *dev = adapter->netdev; |
| struct ixgbe_ring_feature *f; |
| int rss_i, rss_m, i; |
| int tcs; |
| |
| /* Map queue offset and counts onto allocated tx queues */ |
| tcs = netdev_get_num_tc(dev); |
| |
| /* verify we have DCB queueing enabled before proceeding */ |
| if (tcs <= 1) |
| return false; |
| |
| /* determine the upper limit for our current DCB mode */ |
| rss_i = dev->num_tx_queues / tcs; |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { |
| /* 8 TC w/ 4 queues per TC */ |
| rss_i = min_t(u16, rss_i, 4); |
| rss_m = IXGBE_RSS_4Q_MASK; |
| } else if (tcs > 4) { |
| /* 8 TC w/ 8 queues per TC */ |
| rss_i = min_t(u16, rss_i, 8); |
| rss_m = IXGBE_RSS_8Q_MASK; |
| } else { |
| /* 4 TC w/ 16 queues per TC */ |
| rss_i = min_t(u16, rss_i, 16); |
| rss_m = IXGBE_RSS_16Q_MASK; |
| } |
| |
| /* set RSS mask and indices */ |
| f = &adapter->ring_feature[RING_F_RSS]; |
| rss_i = min_t(int, rss_i, f->limit); |
| f->indices = rss_i; |
| f->mask = rss_m; |
| |
| /* disable ATR as it is not supported when multiple TCs are enabled */ |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE enabled queues require special configuration indexed |
| * by feature specific indices and offset. Here we map FCoE |
| * indices onto the DCB queue pairs allowing FCoE to own |
| * configuration later. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { |
| u8 tc = ixgbe_fcoe_get_tc(adapter); |
| |
| f = &adapter->ring_feature[RING_F_FCOE]; |
| f->indices = min_t(u16, rss_i, f->limit); |
| f->offset = rss_i * tc; |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| for (i = 0; i < tcs; i++) |
| netdev_set_tc_queue(dev, i, rss_i, rss_i * i); |
| |
| adapter->num_tx_queues = rss_i * tcs; |
| adapter->num_rx_queues = rss_i * tcs; |
| |
| return true; |
| } |
| |
| #endif |
| /** |
| * ixgbe_set_sriov_queues - Allocate queues for SR-IOV devices |
| * @adapter: board private structure to initialize |
| * |
| * When SR-IOV (Single Root IO Virtualiztion) is enabled, allocate queues |
| * and VM pools where appropriate. If RSS is available, then also try and |
| * enable RSS and map accordingly. |
| * |
| **/ |
| static bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) |
| { |
| u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit; |
| u16 vmdq_m = 0; |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].limit; |
| u16 rss_m = IXGBE_RSS_DISABLED_MASK; |
| #ifdef IXGBE_FCOE |
| u16 fcoe_i = 0; |
| #endif |
| bool pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1); |
| |
| /* only proceed if SR-IOV is enabled */ |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return false; |
| |
| /* Add starting offset to total pool count */ |
| vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset; |
| |
| /* double check we are limited to maximum pools */ |
| vmdq_i = min_t(u16, IXGBE_MAX_VMDQ_INDICES, vmdq_i); |
| |
| /* 64 pool mode with 2 queues per pool */ |
| if ((vmdq_i > 32) || (rss_i < 4) || (vmdq_i > 16 && pools)) { |
| vmdq_m = IXGBE_82599_VMDQ_2Q_MASK; |
| rss_m = IXGBE_RSS_2Q_MASK; |
| rss_i = min_t(u16, rss_i, 2); |
| /* 32 pool mode with 4 queues per pool */ |
| } else { |
| vmdq_m = IXGBE_82599_VMDQ_4Q_MASK; |
| rss_m = IXGBE_RSS_4Q_MASK; |
| rss_i = 4; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* queues in the remaining pools are available for FCoE */ |
| fcoe_i = 128 - (vmdq_i * __ALIGN_MASK(1, ~vmdq_m)); |
| |
| #endif |
| /* remove the starting offset from the pool count */ |
| vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset; |
| |
| /* save features for later use */ |
| adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i; |
| adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m; |
| |
| /* limit RSS based on user input and save for later use */ |
| adapter->ring_feature[RING_F_RSS].indices = rss_i; |
| adapter->ring_feature[RING_F_RSS].mask = rss_m; |
| |
| adapter->num_rx_pools = vmdq_i; |
| adapter->num_rx_queues_per_pool = rss_i; |
| |
| adapter->num_rx_queues = vmdq_i * rss_i; |
| adapter->num_tx_queues = vmdq_i * rss_i; |
| |
| /* disable ATR as it is not supported when VMDq is enabled */ |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| |
| #ifdef IXGBE_FCOE |
| /* |
| * FCoE can use rings from adjacent buffers to allow RSS |
| * like behavior. To account for this we need to add the |
| * FCoE indices to the total ring count. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { |
| struct ixgbe_ring_feature *fcoe; |
| |
| fcoe = &adapter->ring_feature[RING_F_FCOE]; |
| |
| /* limit ourselves based on feature limits */ |
| fcoe_i = min_t(u16, fcoe_i, fcoe->limit); |
| |
| if (vmdq_i > 1 && fcoe_i) { |
| /* alloc queues for FCoE separately */ |
| fcoe->indices = fcoe_i; |
| fcoe->offset = vmdq_i * rss_i; |
| } else { |
| /* merge FCoE queues with RSS queues */ |
| fcoe_i = min_t(u16, fcoe_i + rss_i, num_online_cpus()); |
| |
| /* limit indices to rss_i if MSI-X is disabled */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| fcoe_i = rss_i; |
| |
| /* attempt to reserve some queues for just FCoE */ |
| fcoe->indices = min_t(u16, fcoe_i, fcoe->limit); |
| fcoe->offset = fcoe_i - fcoe->indices; |
| |
| fcoe_i -= rss_i; |
| } |
| |
| /* add queues to adapter */ |
| adapter->num_tx_queues += fcoe_i; |
| adapter->num_rx_queues += fcoe_i; |
| } |
| |
| #endif |
| return true; |
| } |
| |
| /** |
| * ixgbe_set_rss_queues - Allocate queues for RSS |
| * @adapter: board private structure to initialize |
| * |
| * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try |
| * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. |
| * |
| **/ |
| static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_ring_feature *f; |
| u16 rss_i; |
| |
| /* set mask for 16 queue limit of RSS */ |
| f = &adapter->ring_feature[RING_F_RSS]; |
| rss_i = f->limit; |
| |
| f->indices = rss_i; |
| f->mask = IXGBE_RSS_16Q_MASK; |
| |
| /* disable ATR by default, it will be configured below */ |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| |
| /* |
| * Use Flow Director in addition to RSS to ensure the best |
| * distribution of flows across cores, even when an FDIR flow |
| * isn't matched. |
| */ |
| if (rss_i > 1 && adapter->atr_sample_rate) { |
| f = &adapter->ring_feature[RING_F_FDIR]; |
| |
| rss_i = f->indices = f->limit; |
| |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* |
| * FCoE can exist on the same rings as standard network traffic |
| * however it is preferred to avoid that if possible. In order |
| * to get the best performance we allocate as many FCoE queues |
| * as we can and we place them at the end of the ring array to |
| * avoid sharing queues with standard RSS on systems with 24 or |
| * more CPUs. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { |
| struct net_device *dev = adapter->netdev; |
| u16 fcoe_i; |
| |
| f = &adapter->ring_feature[RING_F_FCOE]; |
| |
| /* merge FCoE queues with RSS queues */ |
| fcoe_i = min_t(u16, f->limit + rss_i, num_online_cpus()); |
| fcoe_i = min_t(u16, fcoe_i, dev->num_tx_queues); |
| |
| /* limit indices to rss_i if MSI-X is disabled */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| fcoe_i = rss_i; |
| |
| /* attempt to reserve some queues for just FCoE */ |
| f->indices = min_t(u16, fcoe_i, f->limit); |
| f->offset = fcoe_i - f->indices; |
| rss_i = max_t(u16, fcoe_i, rss_i); |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| adapter->num_rx_queues = rss_i; |
| adapter->num_tx_queues = rss_i; |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_set_num_queues - Allocate queues for device, feature dependent |
| * @adapter: board private structure to initialize |
| * |
| * This is the top level queue allocation routine. The order here is very |
| * important, starting with the "most" number of features turned on at once, |
| * and ending with the smallest set of features. This way large combinations |
| * can be allocated if they're turned on, and smaller combinations are the |
| * fallthrough conditions. |
| * |
| **/ |
| static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) |
| { |
| /* Start with base case */ |
| adapter->num_rx_queues = 1; |
| adapter->num_tx_queues = 1; |
| adapter->num_rx_pools = adapter->num_rx_queues; |
| adapter->num_rx_queues_per_pool = 1; |
| |
| #ifdef CONFIG_IXGBE_DCB |
| if (ixgbe_set_dcb_sriov_queues(adapter)) |
| return; |
| |
| if (ixgbe_set_dcb_queues(adapter)) |
| return; |
| |
| #endif |
| if (ixgbe_set_sriov_queues(adapter)) |
| return; |
| |
| ixgbe_set_rss_queues(adapter); |
| } |
| |
| /** |
| * ixgbe_acquire_msix_vectors - acquire MSI-X vectors |
| * @adapter: board private structure |
| * |
| * Attempts to acquire a suitable range of MSI-X vector interrupts. Will |
| * return a negative error code if unable to acquire MSI-X vectors for any |
| * reason. |
| */ |
| static int ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i, vectors, vector_threshold; |
| |
| /* We start by asking for one vector per queue pair */ |
| vectors = max(adapter->num_rx_queues, adapter->num_tx_queues); |
| |
| /* It is easy to be greedy for MSI-X vectors. However, it really |
| * doesn't do much good if we have a lot more vectors than CPUs. We'll |
| * be somewhat conservative and only ask for (roughly) the same number |
| * of vectors as there are CPUs. |
| */ |
| vectors = min_t(int, vectors, num_online_cpus()); |
| |
| /* Some vectors are necessary for non-queue interrupts */ |
| vectors += NON_Q_VECTORS; |
| |
| /* Hardware can only support a maximum of hw.mac->max_msix_vectors. |
| * With features such as RSS and VMDq, we can easily surpass the |
| * number of Rx and Tx descriptor queues supported by our device. |
| * Thus, we cap the maximum in the rare cases where the CPU count also |
| * exceeds our vector limit |
| */ |
| vectors = min_t(int, vectors, hw->mac.max_msix_vectors); |
| |
| /* We want a minimum of two MSI-X vectors for (1) a TxQ[0] + RxQ[0] |
| * handler, and (2) an Other (Link Status Change, etc.) handler. |
| */ |
| vector_threshold = MIN_MSIX_COUNT; |
| |
| adapter->msix_entries = kcalloc(vectors, |
| sizeof(struct msix_entry), |
| GFP_KERNEL); |
| if (!adapter->msix_entries) |
| return -ENOMEM; |
| |
| for (i = 0; i < vectors; i++) |
| adapter->msix_entries[i].entry = i; |
| |
| vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries, |
| vector_threshold, vectors); |
| |
| if (vectors < 0) { |
| /* A negative count of allocated vectors indicates an error in |
| * acquiring within the specified range of MSI-X vectors |
| */ |
| e_dev_warn("Failed to allocate MSI-X interrupts. Err: %d\n", |
| vectors); |
| |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| |
| return vectors; |
| } |
| |
| /* we successfully allocated some number of vectors within our |
| * requested range. |
| */ |
| adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; |
| |
| /* Adjust for only the vectors we'll use, which is minimum |
| * of max_q_vectors, or the number of vectors we were allocated. |
| */ |
| vectors -= NON_Q_VECTORS; |
| adapter->num_q_vectors = min_t(int, vectors, adapter->max_q_vectors); |
| |
| return 0; |
| } |
| |
| static void ixgbe_add_ring(struct ixgbe_ring *ring, |
| struct ixgbe_ring_container *head) |
| { |
| ring->next = head->ring; |
| head->ring = ring; |
| head->count++; |
| } |
| |
| /** |
| * ixgbe_alloc_q_vector - Allocate memory for a single interrupt vector |
| * @adapter: board private structure to initialize |
| * @v_count: q_vectors allocated on adapter, used for ring interleaving |
| * @v_idx: index of vector in adapter struct |
| * @txr_count: total number of Tx rings to allocate |
| * @txr_idx: index of first Tx ring to allocate |
| * @rxr_count: total number of Rx rings to allocate |
| * @rxr_idx: index of first Rx ring to allocate |
| * |
| * We allocate one q_vector. If allocation fails we return -ENOMEM. |
| **/ |
| static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, |
| int v_count, int v_idx, |
| int txr_count, int txr_idx, |
| int rxr_count, int rxr_idx) |
| { |
| struct ixgbe_q_vector *q_vector; |
| struct ixgbe_ring *ring; |
| int node = NUMA_NO_NODE; |
| int cpu = -1; |
| int ring_count, size; |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| |
| ring_count = txr_count + rxr_count; |
| size = sizeof(struct ixgbe_q_vector) + |
| (sizeof(struct ixgbe_ring) * ring_count); |
| |
| /* customize cpu for Flow Director mapping */ |
| if ((tcs <= 1) && !(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) { |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| if (rss_i > 1 && adapter->atr_sample_rate) { |
| if (cpu_online(v_idx)) { |
| cpu = v_idx; |
| node = cpu_to_node(cpu); |
| } |
| } |
| } |
| |
| /* allocate q_vector and rings */ |
| q_vector = kzalloc_node(size, GFP_KERNEL, node); |
| if (!q_vector) |
| q_vector = kzalloc(size, GFP_KERNEL); |
| if (!q_vector) |
| return -ENOMEM; |
| |
| /* setup affinity mask and node */ |
| if (cpu != -1) |
| cpumask_set_cpu(cpu, &q_vector->affinity_mask); |
| q_vector->numa_node = node; |
| |
| #ifdef CONFIG_IXGBE_DCA |
| /* initialize CPU for DCA */ |
| q_vector->cpu = -1; |
| |
| #endif |
| /* initialize NAPI */ |
| netif_napi_add(adapter->netdev, &q_vector->napi, |
| ixgbe_poll, 64); |
| napi_hash_add(&q_vector->napi); |
| |
| #ifdef CONFIG_NET_RX_BUSY_POLL |
| /* initialize busy poll */ |
| atomic_set(&q_vector->state, IXGBE_QV_STATE_DISABLE); |
| |
| #endif |
| /* tie q_vector and adapter together */ |
| adapter->q_vector[v_idx] = q_vector; |
| q_vector->adapter = adapter; |
| q_vector->v_idx = v_idx; |
| |
| /* initialize work limits */ |
| q_vector->tx.work_limit = adapter->tx_work_limit; |
| |
| /* initialize pointer to rings */ |
| ring = q_vector->ring; |
| |
| /* intialize ITR */ |
| if (txr_count && !rxr_count) { |
| /* tx only vector */ |
| if (adapter->tx_itr_setting == 1) |
| q_vector->itr = IXGBE_10K_ITR; |
| else |
| q_vector->itr = adapter->tx_itr_setting; |
| } else { |
| /* rx or rx/tx vector */ |
| if (adapter->rx_itr_setting == 1) |
| q_vector->itr = IXGBE_20K_ITR; |
| else |
| q_vector->itr = adapter->rx_itr_setting; |
| } |
| |
| while (txr_count) { |
| /* assign generic ring traits */ |
| ring->dev = &adapter->pdev->dev; |
| ring->netdev = adapter->netdev; |
| |
| /* configure backlink on ring */ |
| ring->q_vector = q_vector; |
| |
| /* update q_vector Tx values */ |
| ixgbe_add_ring(ring, &q_vector->tx); |
| |
| /* apply Tx specific ring traits */ |
| ring->count = adapter->tx_ring_count; |
| if (adapter->num_rx_pools > 1) |
| ring->queue_index = |
| txr_idx % adapter->num_rx_queues_per_pool; |
| else |
| ring->queue_index = txr_idx; |
| |
| /* assign ring to adapter */ |
| adapter->tx_ring[txr_idx] = ring; |
| |
| /* update count and index */ |
| txr_count--; |
| txr_idx += v_count; |
| |
| /* push pointer to next ring */ |
| ring++; |
| } |
| |
| while (rxr_count) { |
| /* assign generic ring traits */ |
| ring->dev = &adapter->pdev->dev; |
| ring->netdev = adapter->netdev; |
| |
| /* configure backlink on ring */ |
| ring->q_vector = q_vector; |
| |
| /* update q_vector Rx values */ |
| ixgbe_add_ring(ring, &q_vector->rx); |
| |
| /* |
| * 82599 errata, UDP frames with a 0 checksum |
| * can be marked as checksum errors. |
| */ |
| if (adapter->hw.mac.type == ixgbe_mac_82599EB) |
| set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state); |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->netdev->features & NETIF_F_FCOE_MTU) { |
| struct ixgbe_ring_feature *f; |
| f = &adapter->ring_feature[RING_F_FCOE]; |
| if ((rxr_idx >= f->offset) && |
| (rxr_idx < f->offset + f->indices)) |
| set_bit(__IXGBE_RX_FCOE, &ring->state); |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| /* apply Rx specific ring traits */ |
| ring->count = adapter->rx_ring_count; |
| if (adapter->num_rx_pools > 1) |
| ring->queue_index = |
| rxr_idx % adapter->num_rx_queues_per_pool; |
| else |
| ring->queue_index = rxr_idx; |
| |
| /* assign ring to adapter */ |
| adapter->rx_ring[rxr_idx] = ring; |
| |
| /* update count and index */ |
| rxr_count--; |
| rxr_idx += v_count; |
| |
| /* push pointer to next ring */ |
| ring++; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_free_q_vector - Free memory allocated for specific interrupt vector |
| * @adapter: board private structure to initialize |
| * @v_idx: Index of vector to be freed |
| * |
| * This function frees the memory allocated to the q_vector. In addition if |
| * NAPI is enabled it will delete any references to the NAPI struct prior |
| * to freeing the q_vector. |
| **/ |
| static void ixgbe_free_q_vector(struct ixgbe_adapter *adapter, int v_idx) |
| { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[v_idx]; |
| struct ixgbe_ring *ring; |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| adapter->tx_ring[ring->queue_index] = NULL; |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) |
| adapter->rx_ring[ring->queue_index] = NULL; |
| |
| adapter->q_vector[v_idx] = NULL; |
| napi_hash_del(&q_vector->napi); |
| netif_napi_del(&q_vector->napi); |
| |
| /* |
| * ixgbe_get_stats64() might access the rings on this vector, |
| * we must wait a grace period before freeing it. |
| */ |
| kfree_rcu(q_vector, rcu); |
| } |
| |
| /** |
| * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors |
| * @adapter: board private structure to initialize |
| * |
| * We allocate one q_vector per queue interrupt. If allocation fails we |
| * return -ENOMEM. |
| **/ |
| static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) |
| { |
| int q_vectors = adapter->num_q_vectors; |
| int rxr_remaining = adapter->num_rx_queues; |
| int txr_remaining = adapter->num_tx_queues; |
| int rxr_idx = 0, txr_idx = 0, v_idx = 0; |
| int err; |
| |
| /* only one q_vector if MSI-X is disabled. */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| q_vectors = 1; |
| |
| if (q_vectors >= (rxr_remaining + txr_remaining)) { |
| for (; rxr_remaining; v_idx++) { |
| err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx, |
| 0, 0, 1, rxr_idx); |
| |
| if (err) |
| goto err_out; |
| |
| /* update counts and index */ |
| rxr_remaining--; |
| rxr_idx++; |
| } |
| } |
| |
| for (; v_idx < q_vectors; v_idx++) { |
| int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); |
| int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); |
| err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx, |
| tqpv, txr_idx, |
| rqpv, rxr_idx); |
| |
| if (err) |
| goto err_out; |
| |
| /* update counts and index */ |
| rxr_remaining -= rqpv; |
| txr_remaining -= tqpv; |
| rxr_idx++; |
| txr_idx++; |
| } |
| |
| return 0; |
| |
| err_out: |
| adapter->num_tx_queues = 0; |
| adapter->num_rx_queues = 0; |
| adapter->num_q_vectors = 0; |
| |
| while (v_idx--) |
| ixgbe_free_q_vector(adapter, v_idx); |
| |
| return -ENOMEM; |
| } |
| |
| /** |
| * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors |
| * @adapter: board private structure to initialize |
| * |
| * This function frees the memory allocated to the q_vectors. In addition if |
| * NAPI is enabled it will delete any references to the NAPI struct prior |
| * to freeing the q_vector. |
| **/ |
| static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter) |
| { |
| int v_idx = adapter->num_q_vectors; |
| |
| adapter->num_tx_queues = 0; |
| adapter->num_rx_queues = 0; |
| adapter->num_q_vectors = 0; |
| |
| while (v_idx--) |
| ixgbe_free_q_vector(adapter, v_idx); |
| } |
| |
| static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) |
| { |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| pci_disable_msix(adapter->pdev); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; |
| pci_disable_msi(adapter->pdev); |
| } |
| } |
| |
| /** |
| * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported |
| * @adapter: board private structure to initialize |
| * |
| * Attempt to configure the interrupts using the best available |
| * capabilities of the hardware and the kernel. |
| **/ |
| static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) |
| { |
| int err; |
| |
| /* We will try to get MSI-X interrupts first */ |
| if (!ixgbe_acquire_msix_vectors(adapter)) |
| return; |
| |
| /* At this point, we do not have MSI-X capabilities. We need to |
| * reconfigure or disable various features which require MSI-X |
| * capability. |
| */ |
| |
| /* disable DCB if number of TCs exceeds 1 */ |
| if (netdev_get_num_tc(adapter->netdev) > 1) { |
| e_err(probe, "num TCs exceeds number of queues - disabling DCB\n"); |
| netdev_reset_tc(adapter->netdev); |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| adapter->hw.fc.requested_mode = adapter->last_lfc_mode; |
| |
| adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; |
| adapter->temp_dcb_cfg.pfc_mode_enable = false; |
| adapter->dcb_cfg.pfc_mode_enable = false; |
| } |
| adapter->dcb_cfg.num_tcs.pg_tcs = 1; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = 1; |
| |
| /* disable SR-IOV */ |
| ixgbe_disable_sriov(adapter); |
| |
| /* disable RSS */ |
| adapter->ring_feature[RING_F_RSS].limit = 1; |
| |
| /* recalculate number of queues now that many features have been |
| * changed or disabled. |
| */ |
| ixgbe_set_num_queues(adapter); |
| adapter->num_q_vectors = 1; |
| |
| err = pci_enable_msi(adapter->pdev); |
| if (err) { |
| netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev, |
| "Unable to allocate MSI interrupt, falling back to legacy. Error: %d\n", |
| err); |
| return; |
| } |
| adapter->flags |= IXGBE_FLAG_MSI_ENABLED; |
| } |
| |
| /** |
| * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme |
| * @adapter: board private structure to initialize |
| * |
| * We determine which interrupt scheme to use based on... |
| * - Kernel support (MSI, MSI-X) |
| * - which can be user-defined (via MODULE_PARAM) |
| * - Hardware queue count (num_*_queues) |
| * - defined by miscellaneous hardware support/features (RSS, etc.) |
| **/ |
| int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) |
| { |
| int err; |
| |
| /* Number of supported queues */ |
| ixgbe_set_num_queues(adapter); |
| |
| /* Set interrupt mode */ |
| ixgbe_set_interrupt_capability(adapter); |
| |
| err = ixgbe_alloc_q_vectors(adapter); |
| if (err) { |
| e_dev_err("Unable to allocate memory for queue vectors\n"); |
| goto err_alloc_q_vectors; |
| } |
| |
| ixgbe_cache_ring_register(adapter); |
| |
| e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n", |
| (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled", |
| adapter->num_rx_queues, adapter->num_tx_queues); |
| |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| return 0; |
| |
| err_alloc_q_vectors: |
| ixgbe_reset_interrupt_capability(adapter); |
| return err; |
| } |
| |
| /** |
| * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings |
| * @adapter: board private structure to clear interrupt scheme on |
| * |
| * We go through and clear interrupt specific resources and reset the structure |
| * to pre-load conditions |
| **/ |
| void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter) |
| { |
| adapter->num_tx_queues = 0; |
| adapter->num_rx_queues = 0; |
| |
| ixgbe_free_q_vectors(adapter); |
| ixgbe_reset_interrupt_capability(adapter); |
| } |
| |
| void ixgbe_tx_ctxtdesc(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens, |
| u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx) |
| { |
| struct ixgbe_adv_tx_context_desc *context_desc; |
| u16 i = tx_ring->next_to_use; |
| |
| context_desc = IXGBE_TX_CTXTDESC(tx_ring, i); |
| |
| i++; |
| tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; |
| |
| /* set bits to identify this as an advanced context descriptor */ |
| type_tucmd |= IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT; |
| |
| context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); |
| context_desc->seqnum_seed = cpu_to_le32(fcoe_sof_eof); |
| context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); |
| context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); |
| } |
| |