| /* |
| DVB device driver for cx231xx |
| |
| Copyright (C) 2008 <srinivasa.deevi at conexant dot com> |
| Based on em28xx driver |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "cx231xx.h" |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| |
| #include <media/v4l2-common.h> |
| #include <media/videobuf-vmalloc.h> |
| |
| #include "xc5000.h" |
| #include "s5h1432.h" |
| #include "tda18271.h" |
| #include "s5h1411.h" |
| #include "lgdt3305.h" |
| #include "si2165.h" |
| #include "mb86a20s.h" |
| #include "si2157.h" |
| #include "lgdt3306a.h" |
| |
| MODULE_DESCRIPTION("driver for cx231xx based DVB cards"); |
| MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages [dvb]"); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| #define CX231XX_DVB_NUM_BUFS 5 |
| #define CX231XX_DVB_MAX_PACKETSIZE 564 |
| #define CX231XX_DVB_MAX_PACKETS 64 |
| |
| struct cx231xx_dvb { |
| struct dvb_frontend *frontend; |
| |
| /* feed count management */ |
| struct mutex lock; |
| int nfeeds; |
| |
| /* general boilerplate stuff */ |
| struct dvb_adapter adapter; |
| struct dvb_demux demux; |
| struct dmxdev dmxdev; |
| struct dmx_frontend fe_hw; |
| struct dmx_frontend fe_mem; |
| struct dvb_net net; |
| struct i2c_client *i2c_client_tuner; |
| }; |
| |
| static struct s5h1432_config dvico_s5h1432_config = { |
| .output_mode = S5H1432_SERIAL_OUTPUT, |
| .gpio = S5H1432_GPIO_ON, |
| .qam_if = S5H1432_IF_4000, |
| .vsb_if = S5H1432_IF_4000, |
| .inversion = S5H1432_INVERSION_OFF, |
| .status_mode = S5H1432_DEMODLOCKING, |
| .mpeg_timing = S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = { |
| .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .dvbt_7 = { .if_freq = 4000, .agc_mode = 3, .std = 5, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .dvbt_8 = { .if_freq = 4000, .agc_mode = 3, .std = 6, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_std_map mb86a20s_tda18271_config = { |
| .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4, |
| .if_lvl = 0, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config cnxt_rde253s_tunerconfig = { |
| .std_map = &cnxt_rde253s_tda18271_std_map, |
| .gate = TDA18271_GATE_ANALOG, |
| }; |
| |
| static struct s5h1411_config tda18271_s5h1411_config = { |
| .output_mode = S5H1411_SERIAL_OUTPUT, |
| .gpio = S5H1411_GPIO_OFF, |
| .vsb_if = S5H1411_IF_3250, |
| .qam_if = S5H1411_IF_4000, |
| .inversion = S5H1411_INVERSION_ON, |
| .status_mode = S5H1411_DEMODLOCKING, |
| .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| static struct s5h1411_config xc5000_s5h1411_config = { |
| .output_mode = S5H1411_SERIAL_OUTPUT, |
| .gpio = S5H1411_GPIO_OFF, |
| .vsb_if = S5H1411_IF_3250, |
| .qam_if = S5H1411_IF_3250, |
| .inversion = S5H1411_INVERSION_OFF, |
| .status_mode = S5H1411_DEMODLOCKING, |
| .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| }; |
| |
| static struct lgdt3305_config hcw_lgdt3305_config = { |
| .i2c_addr = 0x0e, |
| .mpeg_mode = LGDT3305_MPEG_SERIAL, |
| .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
| .deny_i2c_rptr = 1, |
| .spectral_inversion = 1, |
| .qam_if_khz = 4000, |
| .vsb_if_khz = 3250, |
| }; |
| |
| static struct tda18271_std_map hauppauge_tda18271_std_map = { |
| .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, |
| .if_lvl = 1, .rfagc_top = 0x58, }, |
| .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, |
| .if_lvl = 1, .rfagc_top = 0x58, }, |
| }; |
| |
| static struct tda18271_config hcw_tda18271_config = { |
| .std_map = &hauppauge_tda18271_std_map, |
| .gate = TDA18271_GATE_DIGITAL, |
| }; |
| |
| static const struct mb86a20s_config pv_mb86a20s_config = { |
| .demod_address = 0x10, |
| .is_serial = true, |
| }; |
| |
| static struct tda18271_config pv_tda18271_config = { |
| .std_map = &mb86a20s_tda18271_config, |
| .gate = TDA18271_GATE_DIGITAL, |
| .small_i2c = TDA18271_03_BYTE_CHUNK_INIT, |
| }; |
| |
| static const struct si2165_config hauppauge_930C_HD_1113xx_si2165_config = { |
| .i2c_addr = 0x64, |
| .chip_mode = SI2165_MODE_PLL_XTAL, |
| .ref_freq_Hz = 16000000, |
| }; |
| |
| static const struct si2165_config pctv_quatro_stick_1114xx_si2165_config = { |
| .i2c_addr = 0x64, |
| .chip_mode = SI2165_MODE_PLL_EXT, |
| .ref_freq_Hz = 24000000, |
| }; |
| |
| static struct lgdt3306a_config hauppauge_955q_lgdt3306a_config = { |
| .i2c_addr = 0x59, |
| .qam_if_khz = 4000, |
| .vsb_if_khz = 3250, |
| .deny_i2c_rptr = 1, |
| .spectral_inversion = 1, |
| .mpeg_mode = LGDT3306A_MPEG_SERIAL, |
| .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE, |
| .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH, |
| .xtalMHz = 25, |
| }; |
| |
| static inline void print_err_status(struct cx231xx *dev, int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronuously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronuously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| dev_dbg(dev->dev, |
| "URB status %d [%s].\n", status, errmsg); |
| } else { |
| dev_dbg(dev->dev, |
| "URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb) |
| { |
| int i; |
| |
| if (!dev) |
| return 0; |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return 0; |
| |
| if (urb->status < 0) { |
| print_err_status(dev, -1, urb->status); |
| if (urb->status == -ENOENT) |
| return 0; |
| } |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| int status = urb->iso_frame_desc[i].status; |
| |
| if (status < 0) { |
| print_err_status(dev, i, status); |
| if (urb->iso_frame_desc[i].status != -EPROTO) |
| continue; |
| } |
| |
| dvb_dmx_swfilter(&dev->dvb->demux, |
| urb->transfer_buffer + |
| urb->iso_frame_desc[i].offset, |
| urb->iso_frame_desc[i].actual_length); |
| } |
| |
| return 0; |
| } |
| |
| static inline int dvb_bulk_copy(struct cx231xx *dev, struct urb *urb) |
| { |
| if (!dev) |
| return 0; |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return 0; |
| |
| if (urb->status < 0) { |
| print_err_status(dev, -1, urb->status); |
| if (urb->status == -ENOENT) |
| return 0; |
| } |
| |
| /* Feed the transport payload into the kernel demux */ |
| dvb_dmx_swfilter(&dev->dvb->demux, |
| urb->transfer_buffer, urb->actual_length); |
| |
| return 0; |
| } |
| |
| static int start_streaming(struct cx231xx_dvb *dvb) |
| { |
| int rc; |
| struct cx231xx *dev = dvb->adapter.priv; |
| |
| if (dev->USE_ISO) { |
| dev_dbg(dev->dev, "DVB transfer mode is ISO.\n"); |
| cx231xx_set_alt_setting(dev, INDEX_TS1, 4); |
| rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE); |
| if (rc < 0) |
| return rc; |
| dev->mode_tv = 1; |
| return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS, |
| CX231XX_DVB_NUM_BUFS, |
| dev->ts1_mode.max_pkt_size, |
| dvb_isoc_copy); |
| } else { |
| dev_dbg(dev->dev, "DVB transfer mode is BULK.\n"); |
| cx231xx_set_alt_setting(dev, INDEX_TS1, 0); |
| rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE); |
| if (rc < 0) |
| return rc; |
| dev->mode_tv = 1; |
| return cx231xx_init_bulk(dev, CX231XX_DVB_MAX_PACKETS, |
| CX231XX_DVB_NUM_BUFS, |
| dev->ts1_mode.max_pkt_size, |
| dvb_bulk_copy); |
| } |
| |
| } |
| |
| static int stop_streaming(struct cx231xx_dvb *dvb) |
| { |
| struct cx231xx *dev = dvb->adapter.priv; |
| |
| if (dev->USE_ISO) |
| cx231xx_uninit_isoc(dev); |
| else |
| cx231xx_uninit_bulk(dev); |
| |
| cx231xx_set_mode(dev, CX231XX_SUSPEND); |
| |
| return 0; |
| } |
| |
| static int start_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct cx231xx_dvb *dvb = demux->priv; |
| int rc, ret; |
| |
| if (!demux->dmx.frontend) |
| return -EINVAL; |
| |
| mutex_lock(&dvb->lock); |
| dvb->nfeeds++; |
| rc = dvb->nfeeds; |
| |
| if (dvb->nfeeds == 1) { |
| ret = start_streaming(dvb); |
| if (ret < 0) |
| rc = ret; |
| } |
| |
| mutex_unlock(&dvb->lock); |
| return rc; |
| } |
| |
| static int stop_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct cx231xx_dvb *dvb = demux->priv; |
| int err = 0; |
| |
| mutex_lock(&dvb->lock); |
| dvb->nfeeds--; |
| |
| if (0 == dvb->nfeeds) |
| err = stop_streaming(dvb); |
| |
| mutex_unlock(&dvb->lock); |
| return err; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire) |
| { |
| struct cx231xx *dev = fe->dvb->priv; |
| |
| if (acquire) |
| return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE); |
| else |
| return cx231xx_set_mode(dev, CX231XX_SUSPEND); |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static struct xc5000_config cnxt_rde250_tunerconfig = { |
| .i2c_address = 0x61, |
| .if_khz = 4000, |
| }; |
| static struct xc5000_config cnxt_rdu250_tunerconfig = { |
| .i2c_address = 0x61, |
| .if_khz = 3250, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| #if 0 |
| static int attach_xc5000(u8 addr, struct cx231xx *dev) |
| { |
| |
| struct dvb_frontend *fe; |
| struct xc5000_config cfg; |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| cfg.i2c_adap = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master); |
| cfg.i2c_addr = addr; |
| |
| if (!dev->dvb->frontend) { |
| dev_err(dev->dev, "%s/2: dvb frontend not attached. " |
| "Can't attach xc5000\n", dev->name); |
| return -EINVAL; |
| } |
| |
| fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg); |
| if (!fe) { |
| dev_err(dev->dev, "%s/2: xc5000 attach failed\n", dev->name); |
| dvb_frontend_detach(dev->dvb->frontend); |
| dev->dvb->frontend = NULL; |
| return -EINVAL; |
| } |
| |
| dev_info(dev->dev, "%s/2: xc5000 attached\n", dev->name); |
| |
| return 0; |
| } |
| #endif |
| |
| int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq) |
| { |
| if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) { |
| |
| struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops; |
| |
| if (dops->set_analog_params != NULL) { |
| struct analog_parameters params; |
| |
| params.frequency = freq; |
| params.std = dev->norm; |
| params.mode = 0; /* 0- Air; 1 - cable */ |
| /*params.audmode = ; */ |
| |
| /* Set the analog parameters to set the frequency */ |
| dops->set_analog_params(dev->dvb->frontend, ¶ms); |
| } |
| |
| } |
| |
| return 0; |
| } |
| |
| int cx231xx_reset_analog_tuner(struct cx231xx *dev) |
| { |
| int status = 0; |
| |
| if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) { |
| |
| struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops; |
| |
| if (dops->init != NULL && !dev->xc_fw_load_done) { |
| |
| dev_dbg(dev->dev, |
| "Reloading firmware for XC5000\n"); |
| status = dops->init(dev->dvb->frontend); |
| if (status == 0) { |
| dev->xc_fw_load_done = 1; |
| dev_dbg(dev->dev, |
| "XC5000 firmware download completed\n"); |
| } else { |
| dev->xc_fw_load_done = 0; |
| dev_dbg(dev->dev, |
| "XC5000 firmware download failed !!!\n"); |
| } |
| } |
| |
| } |
| |
| return status; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int register_dvb(struct cx231xx_dvb *dvb, |
| struct module *module, |
| struct cx231xx *dev, struct device *device) |
| { |
| int result; |
| |
| mutex_init(&dvb->lock); |
| |
| |
| /* register adapter */ |
| result = dvb_register_adapter(&dvb->adapter, dev->name, module, device, |
| adapter_nr); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: dvb_register_adapter failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_adapter; |
| } |
| dvb_register_media_controller(&dvb->adapter, dev->media_dev); |
| |
| /* Ensure all frontends negotiate bus access */ |
| dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl; |
| |
| dvb->adapter.priv = dev; |
| |
| /* register frontend */ |
| result = dvb_register_frontend(&dvb->adapter, dvb->frontend); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: dvb_register_frontend failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_frontend; |
| } |
| |
| /* register demux stuff */ |
| dvb->demux.dmx.capabilities = |
| DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| DMX_MEMORY_BASED_FILTERING; |
| dvb->demux.priv = dvb; |
| dvb->demux.filternum = 256; |
| dvb->demux.feednum = 256; |
| dvb->demux.start_feed = start_feed; |
| dvb->demux.stop_feed = stop_feed; |
| |
| result = dvb_dmx_init(&dvb->demux); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: dvb_dmx_init failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_dmx; |
| } |
| |
| dvb->dmxdev.filternum = 256; |
| dvb->dmxdev.demux = &dvb->demux.dmx; |
| dvb->dmxdev.capabilities = 0; |
| result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: dvb_dmxdev_init failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_dmxdev; |
| } |
| |
| dvb->fe_hw.source = DMX_FRONTEND_0; |
| result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", |
| dev->name, result); |
| goto fail_fe_hw; |
| } |
| |
| dvb->fe_mem.source = DMX_MEMORY_FE; |
| result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", |
| dev->name, result); |
| goto fail_fe_mem; |
| } |
| |
| result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| if (result < 0) { |
| dev_warn(dev->dev, |
| "%s: connect_frontend failed (errno = %d)\n", |
| dev->name, result); |
| goto fail_fe_conn; |
| } |
| |
| /* register network adapter */ |
| dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); |
| dvb_create_media_graph(&dvb->adapter); |
| |
| return 0; |
| |
| fail_fe_conn: |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| fail_fe_mem: |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| fail_fe_hw: |
| dvb_dmxdev_release(&dvb->dmxdev); |
| fail_dmxdev: |
| dvb_dmx_release(&dvb->demux); |
| fail_dmx: |
| dvb_unregister_frontend(dvb->frontend); |
| fail_frontend: |
| dvb_frontend_detach(dvb->frontend); |
| dvb_unregister_adapter(&dvb->adapter); |
| fail_adapter: |
| return result; |
| } |
| |
| static void unregister_dvb(struct cx231xx_dvb *dvb) |
| { |
| struct i2c_client *client; |
| dvb_net_release(&dvb->net); |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| dvb_dmxdev_release(&dvb->dmxdev); |
| dvb_dmx_release(&dvb->demux); |
| client = dvb->i2c_client_tuner; |
| /* remove I2C tuner */ |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| dvb_unregister_frontend(dvb->frontend); |
| dvb_frontend_detach(dvb->frontend); |
| dvb_unregister_adapter(&dvb->adapter); |
| } |
| |
| static int dvb_init(struct cx231xx *dev) |
| { |
| int result = 0; |
| struct cx231xx_dvb *dvb; |
| struct i2c_adapter *tuner_i2c; |
| struct i2c_adapter *demod_i2c; |
| |
| if (!dev->board.has_dvb) { |
| /* This device does not support the extension */ |
| return 0; |
| } |
| |
| dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL); |
| |
| if (dvb == NULL) { |
| dev_info(dev->dev, |
| "cx231xx_dvb: memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| dev->dvb = dvb; |
| dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq; |
| dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner; |
| |
| tuner_i2c = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master); |
| demod_i2c = cx231xx_get_i2c_adap(dev, dev->board.demod_i2c_master); |
| mutex_lock(&dev->lock); |
| cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE); |
| cx231xx_demod_reset(dev); |
| /* init frontend */ |
| switch (dev->model) { |
| case CX231XX_BOARD_CNXT_CARRAERA: |
| case CX231XX_BOARD_CNXT_RDE_250: |
| |
| dev->dvb->frontend = dvb_attach(s5h1432_attach, |
| &dvico_s5h1432_config, |
| demod_i2c); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach s5h1432 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| if (!dvb_attach(xc5000_attach, dev->dvb->frontend, |
| tuner_i2c, |
| &cnxt_rde250_tunerconfig)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| break; |
| case CX231XX_BOARD_CNXT_SHELBY: |
| case CX231XX_BOARD_CNXT_RDU_250: |
| |
| dev->dvb->frontend = dvb_attach(s5h1411_attach, |
| &xc5000_s5h1411_config, |
| demod_i2c); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach s5h1411 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| if (!dvb_attach(xc5000_attach, dev->dvb->frontend, |
| tuner_i2c, |
| &cnxt_rdu250_tunerconfig)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case CX231XX_BOARD_CNXT_RDE_253S: |
| |
| dev->dvb->frontend = dvb_attach(s5h1432_attach, |
| &dvico_s5h1432_config, |
| demod_i2c); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach s5h1432 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| if (!dvb_attach(tda18271_attach, dev->dvb->frontend, |
| 0x60, tuner_i2c, |
| &cnxt_rde253s_tunerconfig)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case CX231XX_BOARD_CNXT_RDU_253S: |
| case CX231XX_BOARD_KWORLD_UB445_USB_HYBRID: |
| |
| dev->dvb->frontend = dvb_attach(s5h1411_attach, |
| &tda18271_s5h1411_config, |
| demod_i2c); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach s5h1411 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| if (!dvb_attach(tda18271_attach, dev->dvb->frontend, |
| 0x60, tuner_i2c, |
| &cnxt_rde253s_tunerconfig)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case CX231XX_BOARD_HAUPPAUGE_EXETER: |
| |
| dev_info(dev->dev, |
| "%s: looking for tuner / demod on i2c bus: %d\n", |
| __func__, i2c_adapter_id(tuner_i2c)); |
| |
| dev->dvb->frontend = dvb_attach(lgdt3305_attach, |
| &hcw_lgdt3305_config, |
| tuner_i2c); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach LG3305 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| dvb_attach(tda18271_attach, dev->dvb->frontend, |
| 0x60, tuner_i2c, |
| &hcw_tda18271_config); |
| break; |
| |
| case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx: |
| |
| dev->dvb->frontend = dvb_attach(si2165_attach, |
| &hauppauge_930C_HD_1113xx_si2165_config, |
| tuner_i2c |
| ); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach SI2165 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| dev->dvb->frontend->ops.i2c_gate_ctrl = NULL; |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| dvb_attach(tda18271_attach, dev->dvb->frontend, |
| 0x60, |
| tuner_i2c, |
| &hcw_tda18271_config); |
| |
| dev->cx231xx_reset_analog_tuner = NULL; |
| break; |
| |
| case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx: |
| { |
| struct i2c_client *client; |
| struct i2c_board_info info; |
| struct si2157_config si2157_config; |
| |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| |
| dev->dvb->frontend = dvb_attach(si2165_attach, |
| &pctv_quatro_stick_1114xx_si2165_config, |
| tuner_i2c |
| ); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach SI2165 front end\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| dev->dvb->frontend->ops.i2c_gate_ctrl = NULL; |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = dev->dvb->frontend; |
| si2157_config.if_port = 1; |
| si2157_config.inversion = true; |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| request_module("si2157"); |
| |
| client = i2c_new_device( |
| tuner_i2c, |
| &info); |
| if (client == NULL || client->dev.driver == NULL) { |
| dvb_frontend_detach(dev->dvb->frontend); |
| result = -ENODEV; |
| goto out_free; |
| } |
| |
| if (!try_module_get(client->dev.driver->owner)) { |
| i2c_unregister_device(client); |
| dvb_frontend_detach(dev->dvb->frontend); |
| result = -ENODEV; |
| goto out_free; |
| } |
| |
| dev->cx231xx_reset_analog_tuner = NULL; |
| |
| dev->dvb->i2c_client_tuner = client; |
| break; |
| } |
| case CX231XX_BOARD_HAUPPAUGE_955Q: |
| { |
| struct i2c_client *client; |
| struct i2c_board_info info; |
| struct si2157_config si2157_config; |
| |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| |
| dev->dvb->frontend = dvb_attach(lgdt3306a_attach, |
| &hauppauge_955q_lgdt3306a_config, |
| tuner_i2c |
| ); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach LGDT3306A frontend.\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| dev->dvb->frontend->ops.i2c_gate_ctrl = NULL; |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = dev->dvb->frontend; |
| si2157_config.if_port = 1; |
| si2157_config.inversion = true; |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| request_module("si2157"); |
| |
| client = i2c_new_device( |
| tuner_i2c, |
| &info); |
| if (client == NULL || client->dev.driver == NULL) { |
| dvb_frontend_detach(dev->dvb->frontend); |
| result = -ENODEV; |
| goto out_free; |
| } |
| |
| if (!try_module_get(client->dev.driver->owner)) { |
| i2c_unregister_device(client); |
| dvb_frontend_detach(dev->dvb->frontend); |
| result = -ENODEV; |
| goto out_free; |
| } |
| |
| dev->cx231xx_reset_analog_tuner = NULL; |
| |
| dev->dvb->i2c_client_tuner = client; |
| break; |
| } |
| case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: |
| case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID: |
| |
| dev_info(dev->dev, |
| "%s: looking for demod on i2c bus: %d\n", |
| __func__, i2c_adapter_id(tuner_i2c)); |
| |
| dev->dvb->frontend = dvb_attach(mb86a20s_attach, |
| &pv_mb86a20s_config, |
| demod_i2c); |
| |
| if (dev->dvb->frontend == NULL) { |
| dev_err(dev->dev, |
| "Failed to attach mb86a20s demod\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* define general-purpose callback pointer */ |
| dvb->frontend->callback = cx231xx_tuner_callback; |
| |
| dvb_attach(tda18271_attach, dev->dvb->frontend, |
| 0x60, tuner_i2c, |
| &pv_tda18271_config); |
| break; |
| |
| default: |
| dev_err(dev->dev, |
| "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", |
| dev->name); |
| break; |
| } |
| if (NULL == dvb->frontend) { |
| dev_err(dev->dev, |
| "%s/2: frontend initialization failed\n", dev->name); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* register everything */ |
| result = register_dvb(dvb, THIS_MODULE, dev, dev->dev); |
| |
| if (result < 0) |
| goto out_free; |
| |
| |
| dev_info(dev->dev, "Successfully loaded cx231xx-dvb\n"); |
| |
| ret: |
| cx231xx_set_mode(dev, CX231XX_SUSPEND); |
| mutex_unlock(&dev->lock); |
| return result; |
| |
| out_free: |
| kfree(dvb); |
| dev->dvb = NULL; |
| goto ret; |
| } |
| |
| static int dvb_fini(struct cx231xx *dev) |
| { |
| if (!dev->board.has_dvb) { |
| /* This device does not support the extension */ |
| return 0; |
| } |
| |
| if (dev->dvb) { |
| unregister_dvb(dev->dvb); |
| dev->dvb = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static struct cx231xx_ops dvb_ops = { |
| .id = CX231XX_DVB, |
| .name = "Cx231xx dvb Extension", |
| .init = dvb_init, |
| .fini = dvb_fini, |
| }; |
| |
| static int __init cx231xx_dvb_register(void) |
| { |
| return cx231xx_register_extension(&dvb_ops); |
| } |
| |
| static void __exit cx231xx_dvb_unregister(void) |
| { |
| cx231xx_unregister_extension(&dvb_ops); |
| } |
| |
| module_init(cx231xx_dvb_register); |
| module_exit(cx231xx_dvb_unregister); |