| /* |
| * drivers/char/watchdog/pnx4008_wdt.c |
| * |
| * Watchdog driver for PNX4008 board |
| * |
| * Authors: Dmitry Chigirev <source@mvista.com>, |
| * Vitaly Wool <vitalywool@gmail.com> |
| * Based on sa1100 driver, |
| * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> |
| * |
| * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/ioport.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/spinlock.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <mach/hardware.h> |
| |
| #define MODULE_NAME "PNX4008-WDT: " |
| |
| /* WatchDog Timer - Chapter 23 Page 207 */ |
| |
| #define DEFAULT_HEARTBEAT 19 |
| #define MAX_HEARTBEAT 60 |
| |
| /* Watchdog timer register set definition */ |
| #define WDTIM_INT(p) ((p) + 0x0) |
| #define WDTIM_CTRL(p) ((p) + 0x4) |
| #define WDTIM_COUNTER(p) ((p) + 0x8) |
| #define WDTIM_MCTRL(p) ((p) + 0xC) |
| #define WDTIM_MATCH0(p) ((p) + 0x10) |
| #define WDTIM_EMR(p) ((p) + 0x14) |
| #define WDTIM_PULSE(p) ((p) + 0x18) |
| #define WDTIM_RES(p) ((p) + 0x1C) |
| |
| /* WDTIM_INT bit definitions */ |
| #define MATCH_INT 1 |
| |
| /* WDTIM_CTRL bit definitions */ |
| #define COUNT_ENAB 1 |
| #define RESET_COUNT (1 << 1) |
| #define DEBUG_EN (1 << 2) |
| |
| /* WDTIM_MCTRL bit definitions */ |
| #define MR0_INT 1 |
| #undef RESET_COUNT0 |
| #define RESET_COUNT0 (1 << 2) |
| #define STOP_COUNT0 (1 << 2) |
| #define M_RES1 (1 << 3) |
| #define M_RES2 (1 << 4) |
| #define RESFRC1 (1 << 5) |
| #define RESFRC2 (1 << 6) |
| |
| /* WDTIM_EMR bit definitions */ |
| #define EXT_MATCH0 1 |
| #define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */ |
| |
| /* WDTIM_RES bit definitions */ |
| #define WDOG_RESET 1 /* read only */ |
| |
| #define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */ |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| static int heartbeat = DEFAULT_HEARTBEAT; |
| |
| static DEFINE_SPINLOCK(io_lock); |
| static unsigned long wdt_status; |
| #define WDT_IN_USE 0 |
| #define WDT_OK_TO_CLOSE 1 |
| #define WDT_REGION_INITED 2 |
| #define WDT_DEVICE_INITED 3 |
| |
| static unsigned long boot_status; |
| |
| static struct resource *wdt_mem; |
| static void __iomem *wdt_base; |
| struct clk *wdt_clk; |
| |
| static void wdt_enable(void) |
| { |
| spin_lock(&io_lock); |
| |
| /* stop counter, initiate counter reset */ |
| __raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); |
| /*wait for reset to complete. 100% guarantee event */ |
| while (__raw_readl(WDTIM_COUNTER(wdt_base))) |
| cpu_relax(); |
| /* internal and external reset, stop after that */ |
| __raw_writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, |
| WDTIM_MCTRL(wdt_base)); |
| /* configure match output */ |
| __raw_writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base)); |
| /* clear interrupt, just in case */ |
| __raw_writel(MATCH_INT, WDTIM_INT(wdt_base)); |
| /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */ |
| __raw_writel(0xFFFF, WDTIM_PULSE(wdt_base)); |
| __raw_writel(heartbeat * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base)); |
| /*enable counter, stop when debugger active */ |
| __raw_writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base)); |
| |
| spin_unlock(&io_lock); |
| } |
| |
| static void wdt_disable(void) |
| { |
| spin_lock(&io_lock); |
| |
| __raw_writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ |
| |
| spin_unlock(&io_lock); |
| } |
| |
| static int pnx4008_wdt_open(struct inode *inode, struct file *file) |
| { |
| int ret; |
| |
| if (test_and_set_bit(WDT_IN_USE, &wdt_status)) |
| return -EBUSY; |
| |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| ret = clk_enable(wdt_clk); |
| if (ret) { |
| clear_bit(WDT_IN_USE, &wdt_status); |
| return ret; |
| } |
| |
| wdt_enable(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static ssize_t pnx4008_wdt_write(struct file *file, const char *data, |
| size_t len, loff_t *ppos) |
| { |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| for (i = 0; i != len; i++) { |
| char c; |
| |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| set_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| } |
| } |
| wdt_enable(); |
| } |
| |
| return len; |
| } |
| |
| static const struct watchdog_info ident = { |
| .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | |
| WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| .identity = "PNX4008 Watchdog", |
| }; |
| |
| static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret = -ENOTTY; |
| int time; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| ret = copy_to_user((struct watchdog_info *)arg, &ident, |
| sizeof(ident)) ? -EFAULT : 0; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| ret = put_user(0, (int *)arg); |
| break; |
| |
| case WDIOC_GETBOOTSTATUS: |
| ret = put_user(boot_status, (int *)arg); |
| break; |
| |
| case WDIOC_KEEPALIVE: |
| wdt_enable(); |
| ret = 0; |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| ret = get_user(time, (int *)arg); |
| if (ret) |
| break; |
| |
| if (time <= 0 || time > MAX_HEARTBEAT) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| heartbeat = time; |
| wdt_enable(); |
| /* Fall through */ |
| |
| case WDIOC_GETTIMEOUT: |
| ret = put_user(heartbeat, (int *)arg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int pnx4008_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) |
| printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n"); |
| |
| wdt_disable(); |
| clk_disable(wdt_clk); |
| clear_bit(WDT_IN_USE, &wdt_status); |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| return 0; |
| } |
| |
| static const struct file_operations pnx4008_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = pnx4008_wdt_write, |
| .unlocked_ioctl = pnx4008_wdt_ioctl, |
| .open = pnx4008_wdt_open, |
| .release = pnx4008_wdt_release, |
| }; |
| |
| static struct miscdevice pnx4008_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &pnx4008_wdt_fops, |
| }; |
| |
| static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) |
| { |
| int ret = 0, size; |
| |
| if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) |
| heartbeat = DEFAULT_HEARTBEAT; |
| |
| printk(KERN_INFO MODULE_NAME |
| "PNX4008 Watchdog Timer: heartbeat %d sec\n", heartbeat); |
| |
| wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (wdt_mem == NULL) { |
| printk(KERN_INFO MODULE_NAME |
| "failed to get memory region resouce\n"); |
| return -ENOENT; |
| } |
| |
| size = resource_size(wdt_mem); |
| |
| if (!request_mem_region(wdt_mem->start, size, pdev->name)) { |
| printk(KERN_INFO MODULE_NAME "failed to get memory region\n"); |
| return -ENOENT; |
| } |
| wdt_base = (void __iomem *)IO_ADDRESS(wdt_mem->start); |
| |
| wdt_clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(wdt_clk)) { |
| ret = PTR_ERR(wdt_clk); |
| release_mem_region(wdt_mem->start, size); |
| wdt_mem = NULL; |
| goto out; |
| } |
| |
| ret = clk_enable(wdt_clk); |
| if (ret) { |
| release_mem_region(wdt_mem->start, size); |
| wdt_mem = NULL; |
| clk_put(wdt_clk); |
| goto out; |
| } |
| |
| ret = misc_register(&pnx4008_wdt_miscdev); |
| if (ret < 0) { |
| printk(KERN_ERR MODULE_NAME "cannot register misc device\n"); |
| release_mem_region(wdt_mem->start, size); |
| wdt_mem = NULL; |
| clk_disable(wdt_clk); |
| clk_put(wdt_clk); |
| } else { |
| boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? |
| WDIOF_CARDRESET : 0; |
| wdt_disable(); /*disable for now */ |
| clk_disable(wdt_clk); |
| set_bit(WDT_DEVICE_INITED, &wdt_status); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static int __devexit pnx4008_wdt_remove(struct platform_device *pdev) |
| { |
| misc_deregister(&pnx4008_wdt_miscdev); |
| |
| clk_disable(wdt_clk); |
| clk_put(wdt_clk); |
| |
| if (wdt_mem) { |
| release_mem_region(wdt_mem->start, resource_size(wdt_mem)); |
| wdt_mem = NULL; |
| } |
| return 0; |
| } |
| |
| static struct platform_driver platform_wdt_driver = { |
| .driver = { |
| .name = "pnx4008-watchdog", |
| .owner = THIS_MODULE, |
| }, |
| .probe = pnx4008_wdt_probe, |
| .remove = __devexit_p(pnx4008_wdt_remove), |
| }; |
| |
| module_platform_driver(platform_wdt_driver); |
| |
| MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); |
| MODULE_DESCRIPTION("PNX4008 Watchdog Driver"); |
| |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, |
| "Watchdog heartbeat period in seconds from 1 to " |
| __MODULE_STRING(MAX_HEARTBEAT) ", default " |
| __MODULE_STRING(DEFAULT_HEARTBEAT)); |
| |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Set to 1 to keep watchdog running after device release"); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| MODULE_ALIAS("platform:pnx4008-watchdog"); |