| /* |
| * Virtual Video driver - This code emulates a real video device with v4l2 api |
| * |
| * Copyright (c) 2006 by: |
| * Mauro Carvalho Chehab <mchehab--a.t--infradead.org> |
| * Ted Walther <ted--a.t--enumera.com> |
| * John Sokol <sokol--a.t--videotechnology.com> |
| * http://v4l.videotechnology.com/ |
| * |
| * Conversion to videobuf2 by Pawel Osciak & Marek Szyprowski |
| * Copyright (c) 2010 Samsung Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the BSD Licence, GNU General Public License |
| * as published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version |
| */ |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/font.h> |
| #include <linux/mutex.h> |
| #include <linux/videodev2.h> |
| #include <linux/kthread.h> |
| #include <linux/freezer.h> |
| #include <media/videobuf2-vmalloc.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fh.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-common.h> |
| |
| #define VIVI_MODULE_NAME "vivi" |
| |
| /* Maximum allowed frame rate |
| * |
| * Vivi will allow setting timeperframe in [1/FPS_MAX - FPS_MAX/1] range. |
| * |
| * Ideally FPS_MAX should be infinity, i.e. practically UINT_MAX, but that |
| * might hit application errors when they manipulate these values. |
| * |
| * Besides, for tpf < 1ms image-generation logic should be changed, to avoid |
| * producing frames with equal content. |
| */ |
| #define FPS_MAX 1000 |
| |
| #define MAX_WIDTH 1920 |
| #define MAX_HEIGHT 1200 |
| |
| #define VIVI_VERSION "0.8.1" |
| |
| MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board"); |
| MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(VIVI_VERSION); |
| |
| static unsigned video_nr = -1; |
| module_param(video_nr, uint, 0644); |
| MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect"); |
| |
| static unsigned n_devs = 1; |
| module_param(n_devs, uint, 0644); |
| MODULE_PARM_DESC(n_devs, "number of video devices to create"); |
| |
| static unsigned debug; |
| module_param(debug, uint, 0644); |
| MODULE_PARM_DESC(debug, "activates debug info"); |
| |
| static unsigned int vid_limit = 16; |
| module_param(vid_limit, uint, 0644); |
| MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); |
| |
| /* Global font descriptor */ |
| static const u8 *font8x16; |
| |
| /* timeperframe: min/max and default */ |
| static const struct v4l2_fract |
| tpf_min = {.numerator = 1, .denominator = FPS_MAX}, |
| tpf_max = {.numerator = FPS_MAX, .denominator = 1}, |
| tpf_default = {.numerator = 1001, .denominator = 30000}; /* NTSC */ |
| |
| #define dprintk(dev, level, fmt, arg...) \ |
| v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ## arg) |
| |
| /* ------------------------------------------------------------------ |
| Basic structures |
| ------------------------------------------------------------------*/ |
| |
| struct vivi_fmt { |
| const char *name; |
| u32 fourcc; /* v4l2 format id */ |
| u8 depth; |
| bool is_yuv; |
| }; |
| |
| static const struct vivi_fmt formats[] = { |
| { |
| .name = "4:2:2, packed, YUYV", |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .depth = 16, |
| .is_yuv = true, |
| }, |
| { |
| .name = "4:2:2, packed, UYVY", |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .depth = 16, |
| .is_yuv = true, |
| }, |
| { |
| .name = "4:2:2, packed, YVYU", |
| .fourcc = V4L2_PIX_FMT_YVYU, |
| .depth = 16, |
| .is_yuv = true, |
| }, |
| { |
| .name = "4:2:2, packed, VYUY", |
| .fourcc = V4L2_PIX_FMT_VYUY, |
| .depth = 16, |
| .is_yuv = true, |
| }, |
| { |
| .name = "RGB565 (LE)", |
| .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ |
| .depth = 16, |
| }, |
| { |
| .name = "RGB565 (BE)", |
| .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ |
| .depth = 16, |
| }, |
| { |
| .name = "RGB555 (LE)", |
| .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ |
| .depth = 16, |
| }, |
| { |
| .name = "RGB555 (BE)", |
| .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ |
| .depth = 16, |
| }, |
| { |
| .name = "RGB24 (LE)", |
| .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ |
| .depth = 24, |
| }, |
| { |
| .name = "RGB24 (BE)", |
| .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ |
| .depth = 24, |
| }, |
| { |
| .name = "RGB32 (LE)", |
| .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ |
| .depth = 32, |
| }, |
| { |
| .name = "RGB32 (BE)", |
| .fourcc = V4L2_PIX_FMT_BGR32, /* bgra */ |
| .depth = 32, |
| }, |
| }; |
| |
| static const struct vivi_fmt *__get_format(u32 pixelformat) |
| { |
| const struct vivi_fmt *fmt; |
| unsigned int k; |
| |
| for (k = 0; k < ARRAY_SIZE(formats); k++) { |
| fmt = &formats[k]; |
| if (fmt->fourcc == pixelformat) |
| break; |
| } |
| |
| if (k == ARRAY_SIZE(formats)) |
| return NULL; |
| |
| return &formats[k]; |
| } |
| |
| static const struct vivi_fmt *get_format(struct v4l2_format *f) |
| { |
| return __get_format(f->fmt.pix.pixelformat); |
| } |
| |
| /* buffer for one video frame */ |
| struct vivi_buffer { |
| /* common v4l buffer stuff -- must be first */ |
| struct vb2_buffer vb; |
| struct list_head list; |
| const struct vivi_fmt *fmt; |
| }; |
| |
| struct vivi_dmaqueue { |
| struct list_head active; |
| |
| /* thread for generating video stream*/ |
| struct task_struct *kthread; |
| wait_queue_head_t wq; |
| /* Counters to control fps rate */ |
| int frame; |
| int ini_jiffies; |
| }; |
| |
| static LIST_HEAD(vivi_devlist); |
| |
| struct vivi_dev { |
| struct list_head vivi_devlist; |
| struct v4l2_device v4l2_dev; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct video_device vdev; |
| |
| /* controls */ |
| struct v4l2_ctrl *brightness; |
| struct v4l2_ctrl *contrast; |
| struct v4l2_ctrl *saturation; |
| struct v4l2_ctrl *hue; |
| struct { |
| /* autogain/gain cluster */ |
| struct v4l2_ctrl *autogain; |
| struct v4l2_ctrl *gain; |
| }; |
| struct v4l2_ctrl *volume; |
| struct v4l2_ctrl *alpha; |
| struct v4l2_ctrl *button; |
| struct v4l2_ctrl *boolean; |
| struct v4l2_ctrl *int32; |
| struct v4l2_ctrl *int64; |
| struct v4l2_ctrl *menu; |
| struct v4l2_ctrl *string; |
| struct v4l2_ctrl *bitmask; |
| struct v4l2_ctrl *int_menu; |
| |
| spinlock_t slock; |
| struct mutex mutex; |
| |
| struct vivi_dmaqueue vidq; |
| |
| /* Several counters */ |
| unsigned ms; |
| unsigned long jiffies; |
| unsigned button_pressed; |
| |
| int mv_count; /* Controls bars movement */ |
| |
| /* Input Number */ |
| int input; |
| |
| /* video capture */ |
| const struct vivi_fmt *fmt; |
| struct v4l2_fract timeperframe; |
| unsigned int width, height; |
| struct vb2_queue vb_vidq; |
| unsigned int field_count; |
| |
| u8 bars[9][3]; |
| u8 line[MAX_WIDTH * 8] __attribute__((__aligned__(4))); |
| unsigned int pixelsize; |
| u8 alpha_component; |
| u32 textfg, textbg; |
| }; |
| |
| /* ------------------------------------------------------------------ |
| DMA and thread functions |
| ------------------------------------------------------------------*/ |
| |
| /* Bars and Colors should match positions */ |
| |
| enum colors { |
| WHITE, |
| AMBER, |
| CYAN, |
| GREEN, |
| MAGENTA, |
| RED, |
| BLUE, |
| BLACK, |
| TEXT_BLACK, |
| }; |
| |
| /* R G B */ |
| #define COLOR_WHITE {204, 204, 204} |
| #define COLOR_AMBER {208, 208, 0} |
| #define COLOR_CYAN { 0, 206, 206} |
| #define COLOR_GREEN { 0, 239, 0} |
| #define COLOR_MAGENTA {239, 0, 239} |
| #define COLOR_RED {205, 0, 0} |
| #define COLOR_BLUE { 0, 0, 255} |
| #define COLOR_BLACK { 0, 0, 0} |
| |
| struct bar_std { |
| u8 bar[9][3]; |
| }; |
| |
| /* Maximum number of bars are 10 - otherwise, the input print code |
| should be modified */ |
| static const struct bar_std bars[] = { |
| { /* Standard ITU-R color bar sequence */ |
| { COLOR_WHITE, COLOR_AMBER, COLOR_CYAN, COLOR_GREEN, |
| COLOR_MAGENTA, COLOR_RED, COLOR_BLUE, COLOR_BLACK, COLOR_BLACK } |
| }, { |
| { COLOR_WHITE, COLOR_AMBER, COLOR_BLACK, COLOR_WHITE, |
| COLOR_AMBER, COLOR_BLACK, COLOR_WHITE, COLOR_AMBER, COLOR_BLACK } |
| }, { |
| { COLOR_WHITE, COLOR_CYAN, COLOR_BLACK, COLOR_WHITE, |
| COLOR_CYAN, COLOR_BLACK, COLOR_WHITE, COLOR_CYAN, COLOR_BLACK } |
| }, { |
| { COLOR_WHITE, COLOR_GREEN, COLOR_BLACK, COLOR_WHITE, |
| COLOR_GREEN, COLOR_BLACK, COLOR_WHITE, COLOR_GREEN, COLOR_BLACK } |
| }, |
| }; |
| |
| #define NUM_INPUTS ARRAY_SIZE(bars) |
| |
| #define TO_Y(r, g, b) \ |
| (((16829 * r + 33039 * g + 6416 * b + 32768) >> 16) + 16) |
| /* RGB to V(Cr) Color transform */ |
| #define TO_V(r, g, b) \ |
| (((28784 * r - 24103 * g - 4681 * b + 32768) >> 16) + 128) |
| /* RGB to U(Cb) Color transform */ |
| #define TO_U(r, g, b) \ |
| (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) |
| |
| /* precalculate color bar values to speed up rendering */ |
| static void precalculate_bars(struct vivi_dev *dev) |
| { |
| u8 r, g, b; |
| int k, is_yuv; |
| |
| for (k = 0; k < 9; k++) { |
| r = bars[dev->input].bar[k][0]; |
| g = bars[dev->input].bar[k][1]; |
| b = bars[dev->input].bar[k][2]; |
| is_yuv = dev->fmt->is_yuv; |
| |
| switch (dev->fmt->fourcc) { |
| case V4L2_PIX_FMT_RGB565: |
| case V4L2_PIX_FMT_RGB565X: |
| r >>= 3; |
| g >>= 2; |
| b >>= 3; |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| case V4L2_PIX_FMT_RGB555X: |
| r >>= 3; |
| g >>= 3; |
| b >>= 3; |
| break; |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_UYVY: |
| case V4L2_PIX_FMT_YVYU: |
| case V4L2_PIX_FMT_VYUY: |
| case V4L2_PIX_FMT_RGB24: |
| case V4L2_PIX_FMT_BGR24: |
| case V4L2_PIX_FMT_RGB32: |
| case V4L2_PIX_FMT_BGR32: |
| break; |
| } |
| |
| if (is_yuv) { |
| dev->bars[k][0] = TO_Y(r, g, b); /* Luma */ |
| dev->bars[k][1] = TO_U(r, g, b); /* Cb */ |
| dev->bars[k][2] = TO_V(r, g, b); /* Cr */ |
| } else { |
| dev->bars[k][0] = r; |
| dev->bars[k][1] = g; |
| dev->bars[k][2] = b; |
| } |
| } |
| } |
| |
| /* 'odd' is true for pixels 1, 3, 5, etc. and false for pixels 0, 2, 4, etc. */ |
| static void gen_twopix(struct vivi_dev *dev, u8 *buf, int colorpos, bool odd) |
| { |
| u8 r_y, g_u, b_v; |
| u8 alpha = dev->alpha_component; |
| int color; |
| u8 *p; |
| |
| r_y = dev->bars[colorpos][0]; /* R or precalculated Y */ |
| g_u = dev->bars[colorpos][1]; /* G or precalculated U */ |
| b_v = dev->bars[colorpos][2]; /* B or precalculated V */ |
| |
| for (color = 0; color < dev->pixelsize; color++) { |
| p = buf + color; |
| |
| switch (dev->fmt->fourcc) { |
| case V4L2_PIX_FMT_YUYV: |
| switch (color) { |
| case 0: |
| *p = r_y; |
| break; |
| case 1: |
| *p = odd ? b_v : g_u; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_UYVY: |
| switch (color) { |
| case 0: |
| *p = odd ? b_v : g_u; |
| break; |
| case 1: |
| *p = r_y; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_YVYU: |
| switch (color) { |
| case 0: |
| *p = r_y; |
| break; |
| case 1: |
| *p = odd ? g_u : b_v; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_VYUY: |
| switch (color) { |
| case 0: |
| *p = odd ? g_u : b_v; |
| break; |
| case 1: |
| *p = r_y; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_RGB565: |
| switch (color) { |
| case 0: |
| *p = (g_u << 5) | b_v; |
| break; |
| case 1: |
| *p = (r_y << 3) | (g_u >> 3); |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_RGB565X: |
| switch (color) { |
| case 0: |
| *p = (r_y << 3) | (g_u >> 3); |
| break; |
| case 1: |
| *p = (g_u << 5) | b_v; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| switch (color) { |
| case 0: |
| *p = (g_u << 5) | b_v; |
| break; |
| case 1: |
| *p = (alpha & 0x80) | (r_y << 2) | (g_u >> 3); |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_RGB555X: |
| switch (color) { |
| case 0: |
| *p = (alpha & 0x80) | (r_y << 2) | (g_u >> 3); |
| break; |
| case 1: |
| *p = (g_u << 5) | b_v; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| switch (color) { |
| case 0: |
| *p = r_y; |
| break; |
| case 1: |
| *p = g_u; |
| break; |
| case 2: |
| *p = b_v; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_BGR24: |
| switch (color) { |
| case 0: |
| *p = b_v; |
| break; |
| case 1: |
| *p = g_u; |
| break; |
| case 2: |
| *p = r_y; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| switch (color) { |
| case 0: |
| *p = alpha; |
| break; |
| case 1: |
| *p = r_y; |
| break; |
| case 2: |
| *p = g_u; |
| break; |
| case 3: |
| *p = b_v; |
| break; |
| } |
| break; |
| case V4L2_PIX_FMT_BGR32: |
| switch (color) { |
| case 0: |
| *p = b_v; |
| break; |
| case 1: |
| *p = g_u; |
| break; |
| case 2: |
| *p = r_y; |
| break; |
| case 3: |
| *p = alpha; |
| break; |
| } |
| break; |
| } |
| } |
| } |
| |
| static void precalculate_line(struct vivi_dev *dev) |
| { |
| unsigned pixsize = dev->pixelsize; |
| unsigned pixsize2 = 2*pixsize; |
| int colorpos; |
| u8 *pos; |
| |
| for (colorpos = 0; colorpos < 16; ++colorpos) { |
| u8 pix[8]; |
| int wstart = colorpos * dev->width / 8; |
| int wend = (colorpos+1) * dev->width / 8; |
| int w; |
| |
| gen_twopix(dev, &pix[0], colorpos % 8, 0); |
| gen_twopix(dev, &pix[pixsize], colorpos % 8, 1); |
| |
| for (w = wstart/2*2, pos = dev->line + w*pixsize; w < wend; w += 2, pos += pixsize2) |
| memcpy(pos, pix, pixsize2); |
| } |
| } |
| |
| /* need this to do rgb24 rendering */ |
| typedef struct { u16 __; u8 _; } __attribute__((packed)) x24; |
| |
| static void gen_text(struct vivi_dev *dev, char *basep, |
| int y, int x, char *text) |
| { |
| int line; |
| unsigned int width = dev->width; |
| |
| /* Checks if it is possible to show string */ |
| if (y + 16 >= dev->height || x + strlen(text) * 8 >= width) |
| return; |
| |
| /* Print stream time */ |
| #define PRINTSTR(PIXTYPE) do { \ |
| PIXTYPE fg; \ |
| PIXTYPE bg; \ |
| memcpy(&fg, &dev->textfg, sizeof(PIXTYPE)); \ |
| memcpy(&bg, &dev->textbg, sizeof(PIXTYPE)); \ |
| \ |
| for (line = 0; line < 16; line++) { \ |
| PIXTYPE *pos = (PIXTYPE *)( basep + ((y + line) * width + x) * sizeof(PIXTYPE) ); \ |
| u8 *s; \ |
| \ |
| for (s = text; *s; s++) { \ |
| u8 chr = font8x16[*s * 16 + line]; \ |
| \ |
| pos[0] = (chr & (0x01 << 7) ? fg : bg); \ |
| pos[1] = (chr & (0x01 << 6) ? fg : bg); \ |
| pos[2] = (chr & (0x01 << 5) ? fg : bg); \ |
| pos[3] = (chr & (0x01 << 4) ? fg : bg); \ |
| pos[4] = (chr & (0x01 << 3) ? fg : bg); \ |
| pos[5] = (chr & (0x01 << 2) ? fg : bg); \ |
| pos[6] = (chr & (0x01 << 1) ? fg : bg); \ |
| pos[7] = (chr & (0x01 << 0) ? fg : bg); \ |
| \ |
| pos += 8; \ |
| } \ |
| } \ |
| } while (0) |
| |
| switch (dev->pixelsize) { |
| case 2: |
| PRINTSTR(u16); break; |
| case 4: |
| PRINTSTR(u32); break; |
| case 3: |
| PRINTSTR(x24); break; |
| } |
| } |
| |
| static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) |
| { |
| int stride = dev->width * dev->pixelsize; |
| int hmax = dev->height; |
| void *vbuf = vb2_plane_vaddr(&buf->vb, 0); |
| unsigned ms; |
| char str[100]; |
| int h, line = 1; |
| u8 *linestart; |
| s32 gain; |
| |
| if (!vbuf) |
| return; |
| |
| linestart = dev->line + (dev->mv_count % dev->width) * dev->pixelsize; |
| |
| for (h = 0; h < hmax; h++) |
| memcpy(vbuf + h * stride, linestart, stride); |
| |
| /* Updates stream time */ |
| |
| gen_twopix(dev, (u8 *)&dev->textbg, TEXT_BLACK, /*odd=*/ 0); |
| gen_twopix(dev, (u8 *)&dev->textfg, WHITE, /*odd=*/ 0); |
| |
| dev->ms += jiffies_to_msecs(jiffies - dev->jiffies); |
| dev->jiffies = jiffies; |
| ms = dev->ms; |
| snprintf(str, sizeof(str), " %02d:%02d:%02d:%03d ", |
| (ms / (60 * 60 * 1000)) % 24, |
| (ms / (60 * 1000)) % 60, |
| (ms / 1000) % 60, |
| ms % 1000); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| snprintf(str, sizeof(str), " %dx%d, input %d ", |
| dev->width, dev->height, dev->input); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| |
| gain = v4l2_ctrl_g_ctrl(dev->gain); |
| mutex_lock(dev->ctrl_handler.lock); |
| snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ", |
| dev->brightness->cur.val, |
| dev->contrast->cur.val, |
| dev->saturation->cur.val, |
| dev->hue->cur.val); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| snprintf(str, sizeof(str), " autogain %d, gain %3d, volume %3d, alpha 0x%02x ", |
| dev->autogain->cur.val, gain, dev->volume->cur.val, |
| dev->alpha->cur.val); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| snprintf(str, sizeof(str), " int32 %d, int64 %lld, bitmask %08x ", |
| dev->int32->cur.val, |
| dev->int64->cur.val64, |
| dev->bitmask->cur.val); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ", |
| dev->boolean->cur.val, |
| dev->menu->qmenu[dev->menu->cur.val], |
| dev->string->cur.string); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| snprintf(str, sizeof(str), " integer_menu %lld, value %d ", |
| dev->int_menu->qmenu_int[dev->int_menu->cur.val], |
| dev->int_menu->cur.val); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| mutex_unlock(dev->ctrl_handler.lock); |
| if (dev->button_pressed) { |
| dev->button_pressed--; |
| snprintf(str, sizeof(str), " button pressed!"); |
| gen_text(dev, vbuf, line++ * 16, 16, str); |
| } |
| |
| dev->mv_count += 2; |
| |
| buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; |
| dev->field_count++; |
| buf->vb.v4l2_buf.sequence = dev->field_count >> 1; |
| v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp); |
| } |
| |
| static void vivi_thread_tick(struct vivi_dev *dev) |
| { |
| struct vivi_dmaqueue *dma_q = &dev->vidq; |
| struct vivi_buffer *buf; |
| unsigned long flags = 0; |
| |
| dprintk(dev, 1, "Thread tick\n"); |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| if (list_empty(&dma_q->active)) { |
| dprintk(dev, 1, "No active queue to serve\n"); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| return; |
| } |
| |
| buf = list_entry(dma_q->active.next, struct vivi_buffer, list); |
| list_del(&buf->list); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp); |
| |
| /* Fill buffer */ |
| vivi_fillbuff(dev, buf); |
| dprintk(dev, 1, "filled buffer %p\n", buf); |
| |
| vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); |
| dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index); |
| } |
| |
| #define frames_to_ms(dev, frames) \ |
| ((frames * dev->timeperframe.numerator * 1000) / dev->timeperframe.denominator) |
| |
| static void vivi_sleep(struct vivi_dev *dev) |
| { |
| struct vivi_dmaqueue *dma_q = &dev->vidq; |
| int timeout; |
| DECLARE_WAITQUEUE(wait, current); |
| |
| dprintk(dev, 1, "%s dma_q=0x%08lx\n", __func__, |
| (unsigned long)dma_q); |
| |
| add_wait_queue(&dma_q->wq, &wait); |
| if (kthread_should_stop()) |
| goto stop_task; |
| |
| /* Calculate time to wake up */ |
| timeout = msecs_to_jiffies(frames_to_ms(dev, 1)); |
| |
| vivi_thread_tick(dev); |
| |
| schedule_timeout_interruptible(timeout); |
| |
| stop_task: |
| remove_wait_queue(&dma_q->wq, &wait); |
| try_to_freeze(); |
| } |
| |
| static int vivi_thread(void *data) |
| { |
| struct vivi_dev *dev = data; |
| |
| dprintk(dev, 1, "thread started\n"); |
| |
| set_freezable(); |
| |
| for (;;) { |
| vivi_sleep(dev); |
| |
| if (kthread_should_stop()) |
| break; |
| } |
| dprintk(dev, 1, "thread: exit\n"); |
| return 0; |
| } |
| |
| static int vivi_start_generating(struct vivi_dev *dev) |
| { |
| struct vivi_dmaqueue *dma_q = &dev->vidq; |
| |
| dprintk(dev, 1, "%s\n", __func__); |
| |
| /* Resets frame counters */ |
| dev->ms = 0; |
| dev->mv_count = 0; |
| dev->jiffies = jiffies; |
| |
| dma_q->frame = 0; |
| dma_q->ini_jiffies = jiffies; |
| dma_q->kthread = kthread_run(vivi_thread, dev, "%s", |
| dev->v4l2_dev.name); |
| |
| if (IS_ERR(dma_q->kthread)) { |
| v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n"); |
| return PTR_ERR(dma_q->kthread); |
| } |
| /* Wakes thread */ |
| wake_up_interruptible(&dma_q->wq); |
| |
| dprintk(dev, 1, "returning from %s\n", __func__); |
| return 0; |
| } |
| |
| static void vivi_stop_generating(struct vivi_dev *dev) |
| { |
| struct vivi_dmaqueue *dma_q = &dev->vidq; |
| |
| dprintk(dev, 1, "%s\n", __func__); |
| |
| /* shutdown control thread */ |
| if (dma_q->kthread) { |
| kthread_stop(dma_q->kthread); |
| dma_q->kthread = NULL; |
| } |
| |
| /* |
| * Typical driver might need to wait here until dma engine stops. |
| * In this case we can abort imiedetly, so it's just a noop. |
| */ |
| |
| /* Release all active buffers */ |
| while (!list_empty(&dma_q->active)) { |
| struct vivi_buffer *buf; |
| buf = list_entry(dma_q->active.next, struct vivi_buffer, list); |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); |
| dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index); |
| } |
| } |
| /* ------------------------------------------------------------------ |
| Videobuf operations |
| ------------------------------------------------------------------*/ |
| static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, |
| unsigned int *nbuffers, unsigned int *nplanes, |
| unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vq); |
| unsigned long size; |
| |
| if (fmt) |
| size = fmt->fmt.pix.sizeimage; |
| else |
| size = dev->width * dev->height * dev->pixelsize; |
| |
| if (size == 0) |
| return -EINVAL; |
| |
| if (0 == *nbuffers) |
| *nbuffers = 32; |
| |
| while (size * *nbuffers > vid_limit * 1024 * 1024) |
| (*nbuffers)--; |
| |
| *nplanes = 1; |
| |
| sizes[0] = size; |
| |
| /* |
| * videobuf2-vmalloc allocator is context-less so no need to set |
| * alloc_ctxs array. |
| */ |
| |
| dprintk(dev, 1, "%s, count=%d, size=%ld\n", __func__, |
| *nbuffers, size); |
| |
| return 0; |
| } |
| |
| static int buffer_prepare(struct vb2_buffer *vb) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); |
| struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); |
| unsigned long size; |
| |
| dprintk(dev, 1, "%s, field=%d\n", __func__, vb->v4l2_buf.field); |
| |
| BUG_ON(NULL == dev->fmt); |
| |
| /* |
| * Theses properties only change when queue is idle, see s_fmt. |
| * The below checks should not be performed here, on each |
| * buffer_prepare (i.e. on each qbuf). Most of the code in this function |
| * should thus be moved to buffer_init and s_fmt. |
| */ |
| if (dev->width < 48 || dev->width > MAX_WIDTH || |
| dev->height < 32 || dev->height > MAX_HEIGHT) |
| return -EINVAL; |
| |
| size = dev->width * dev->height * dev->pixelsize; |
| if (vb2_plane_size(vb, 0) < size) { |
| dprintk(dev, 1, "%s data will not fit into plane (%lu < %lu)\n", |
| __func__, vb2_plane_size(vb, 0), size); |
| return -EINVAL; |
| } |
| |
| vb2_set_plane_payload(&buf->vb, 0, size); |
| |
| buf->fmt = dev->fmt; |
| |
| precalculate_bars(dev); |
| precalculate_line(dev); |
| |
| return 0; |
| } |
| |
| static void buffer_queue(struct vb2_buffer *vb) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); |
| struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); |
| struct vivi_dmaqueue *vidq = &dev->vidq; |
| unsigned long flags = 0; |
| |
| dprintk(dev, 1, "%s\n", __func__); |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| list_add_tail(&buf->list, &vidq->active); |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| static int start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vq); |
| dprintk(dev, 1, "%s\n", __func__); |
| return vivi_start_generating(dev); |
| } |
| |
| /* abort streaming and wait for last buffer */ |
| static int stop_streaming(struct vb2_queue *vq) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vq); |
| dprintk(dev, 1, "%s\n", __func__); |
| vivi_stop_generating(dev); |
| return 0; |
| } |
| |
| static void vivi_lock(struct vb2_queue *vq) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vq); |
| mutex_lock(&dev->mutex); |
| } |
| |
| static void vivi_unlock(struct vb2_queue *vq) |
| { |
| struct vivi_dev *dev = vb2_get_drv_priv(vq); |
| mutex_unlock(&dev->mutex); |
| } |
| |
| |
| static const struct vb2_ops vivi_video_qops = { |
| .queue_setup = queue_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .start_streaming = start_streaming, |
| .stop_streaming = stop_streaming, |
| .wait_prepare = vivi_unlock, |
| .wait_finish = vivi_lock, |
| }; |
| |
| /* ------------------------------------------------------------------ |
| IOCTL vidioc handling |
| ------------------------------------------------------------------*/ |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| |
| strcpy(cap->driver, "vivi"); |
| strcpy(cap->card, "vivi"); |
| snprintf(cap->bus_info, sizeof(cap->bus_info), |
| "platform:%s", dev->v4l2_dev.name); |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | |
| V4L2_CAP_READWRITE; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| const struct vivi_fmt *fmt; |
| |
| if (f->index >= ARRAY_SIZE(formats)) |
| return -EINVAL; |
| |
| fmt = &formats[f->index]; |
| |
| strlcpy(f->description, fmt->name, sizeof(f->description)); |
| f->pixelformat = fmt->fourcc; |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| |
| f->fmt.pix.width = dev->width; |
| f->fmt.pix.height = dev->height; |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| f->fmt.pix.pixelformat = dev->fmt->fourcc; |
| f->fmt.pix.bytesperline = |
| (f->fmt.pix.width * dev->fmt->depth) >> 3; |
| f->fmt.pix.sizeimage = |
| f->fmt.pix.height * f->fmt.pix.bytesperline; |
| if (dev->fmt->is_yuv) |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| else |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| const struct vivi_fmt *fmt; |
| |
| fmt = get_format(f); |
| if (!fmt) { |
| dprintk(dev, 1, "Fourcc format (0x%08x) unknown.\n", |
| f->fmt.pix.pixelformat); |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; |
| fmt = get_format(f); |
| } |
| |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| v4l_bound_align_image(&f->fmt.pix.width, 48, MAX_WIDTH, 2, |
| &f->fmt.pix.height, 32, MAX_HEIGHT, 0, 0); |
| f->fmt.pix.bytesperline = |
| (f->fmt.pix.width * fmt->depth) >> 3; |
| f->fmt.pix.sizeimage = |
| f->fmt.pix.height * f->fmt.pix.bytesperline; |
| if (fmt->is_yuv) |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| else |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; |
| f->fmt.pix.priv = 0; |
| return 0; |
| } |
| |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| struct vb2_queue *q = &dev->vb_vidq; |
| |
| int ret = vidioc_try_fmt_vid_cap(file, priv, f); |
| if (ret < 0) |
| return ret; |
| |
| if (vb2_is_busy(q)) { |
| dprintk(dev, 1, "%s device busy\n", __func__); |
| return -EBUSY; |
| } |
| |
| dev->fmt = get_format(f); |
| dev->pixelsize = dev->fmt->depth / 8; |
| dev->width = f->fmt.pix.width; |
| dev->height = f->fmt.pix.height; |
| |
| return 0; |
| } |
| |
| static int vidioc_enum_framesizes(struct file *file, void *fh, |
| struct v4l2_frmsizeenum *fsize) |
| { |
| static const struct v4l2_frmsize_stepwise sizes = { |
| 48, MAX_WIDTH, 4, |
| 32, MAX_HEIGHT, 1 |
| }; |
| int i; |
| |
| if (fsize->index) |
| return -EINVAL; |
| for (i = 0; i < ARRAY_SIZE(formats); i++) |
| if (formats[i].fourcc == fsize->pixel_format) |
| break; |
| if (i == ARRAY_SIZE(formats)) |
| return -EINVAL; |
| fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; |
| fsize->stepwise = sizes; |
| return 0; |
| } |
| |
| /* only one input in this sample driver */ |
| static int vidioc_enum_input(struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| if (inp->index >= NUM_INPUTS) |
| return -EINVAL; |
| |
| inp->type = V4L2_INPUT_TYPE_CAMERA; |
| sprintf(inp->name, "Camera %u", inp->index); |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| |
| *i = dev->input; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| |
| if (i >= NUM_INPUTS) |
| return -EINVAL; |
| |
| if (i == dev->input) |
| return 0; |
| |
| dev->input = i; |
| /* |
| * Modify the brightness range depending on the input. |
| * This makes it easy to use vivi to test if applications can |
| * handle control range modifications and is also how this is |
| * typically used in practice as different inputs may be hooked |
| * up to different receivers with different control ranges. |
| */ |
| v4l2_ctrl_modify_range(dev->brightness, |
| 128 * i, 255 + 128 * i, 1, 127 + 128 * i); |
| precalculate_bars(dev); |
| precalculate_line(dev); |
| return 0; |
| } |
| |
| /* timeperframe is arbitrary and continous */ |
| static int vidioc_enum_frameintervals(struct file *file, void *priv, |
| struct v4l2_frmivalenum *fival) |
| { |
| const struct vivi_fmt *fmt; |
| |
| if (fival->index) |
| return -EINVAL; |
| |
| fmt = __get_format(fival->pixel_format); |
| if (!fmt) |
| return -EINVAL; |
| |
| /* regarding width & height - we support any */ |
| |
| fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; |
| |
| /* fill in stepwise (step=1.0 is requred by V4L2 spec) */ |
| fival->stepwise.min = tpf_min; |
| fival->stepwise.max = tpf_max; |
| fival->stepwise.step = (struct v4l2_fract) {1, 1}; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_parm(struct file *file, void *priv, |
| struct v4l2_streamparm *parm) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| |
| if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; |
| parm->parm.capture.timeperframe = dev->timeperframe; |
| parm->parm.capture.readbuffers = 1; |
| return 0; |
| } |
| |
| #define FRACT_CMP(a, OP, b) \ |
| ((u64)(a).numerator * (b).denominator OP (u64)(b).numerator * (a).denominator) |
| |
| static int vidioc_s_parm(struct file *file, void *priv, |
| struct v4l2_streamparm *parm) |
| { |
| struct vivi_dev *dev = video_drvdata(file); |
| struct v4l2_fract tpf; |
| |
| if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| |
| tpf = parm->parm.capture.timeperframe; |
| |
| /* tpf: {*, 0} resets timing; clip to [min, max]*/ |
| tpf = tpf.denominator ? tpf : tpf_default; |
| tpf = FRACT_CMP(tpf, <, tpf_min) ? tpf_min : tpf; |
| tpf = FRACT_CMP(tpf, >, tpf_max) ? tpf_max : tpf; |
| |
| dev->timeperframe = tpf; |
| parm->parm.capture.timeperframe = tpf; |
| parm->parm.capture.readbuffers = 1; |
| return 0; |
| } |
| |
| /* --- controls ---------------------------------------------- */ |
| |
| static int vivi_g_volatile_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler); |
| |
| if (ctrl == dev->autogain) |
| dev->gain->val = jiffies & 0xff; |
| return 0; |
| } |
| |
| static int vivi_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ALPHA_COMPONENT: |
| dev->alpha_component = ctrl->val; |
| break; |
| default: |
| if (ctrl == dev->button) |
| dev->button_pressed = 30; |
| break; |
| } |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ |
| File operations for the device |
| ------------------------------------------------------------------*/ |
| |
| static const struct v4l2_ctrl_ops vivi_ctrl_ops = { |
| .g_volatile_ctrl = vivi_g_volatile_ctrl, |
| .s_ctrl = vivi_s_ctrl, |
| }; |
| |
| #define VIVI_CID_CUSTOM_BASE (V4L2_CID_USER_BASE | 0xf000) |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_button = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 0, |
| .name = "Button", |
| .type = V4L2_CTRL_TYPE_BUTTON, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_boolean = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 1, |
| .name = "Boolean", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = 0, |
| .max = 1, |
| .step = 1, |
| .def = 1, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_int32 = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 2, |
| .name = "Integer 32 Bits", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0x80000000, |
| .max = 0x7fffffff, |
| .step = 1, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_int64 = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 3, |
| .name = "Integer 64 Bits", |
| .type = V4L2_CTRL_TYPE_INTEGER64, |
| }; |
| |
| static const char * const vivi_ctrl_menu_strings[] = { |
| "Menu Item 0 (Skipped)", |
| "Menu Item 1", |
| "Menu Item 2 (Skipped)", |
| "Menu Item 3", |
| "Menu Item 4", |
| "Menu Item 5 (Skipped)", |
| NULL, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_menu = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 4, |
| .name = "Menu", |
| .type = V4L2_CTRL_TYPE_MENU, |
| .min = 1, |
| .max = 4, |
| .def = 3, |
| .menu_skip_mask = 0x04, |
| .qmenu = vivi_ctrl_menu_strings, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_string = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 5, |
| .name = "String", |
| .type = V4L2_CTRL_TYPE_STRING, |
| .min = 2, |
| .max = 4, |
| .step = 1, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_bitmask = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 6, |
| .name = "Bitmask", |
| .type = V4L2_CTRL_TYPE_BITMASK, |
| .def = 0x80002000, |
| .min = 0, |
| .max = 0x80402010, |
| .step = 0, |
| }; |
| |
| static const s64 vivi_ctrl_int_menu_values[] = { |
| 1, 1, 2, 3, 5, 8, 13, 21, 42, |
| }; |
| |
| static const struct v4l2_ctrl_config vivi_ctrl_int_menu = { |
| .ops = &vivi_ctrl_ops, |
| .id = VIVI_CID_CUSTOM_BASE + 7, |
| .name = "Integer menu", |
| .type = V4L2_CTRL_TYPE_INTEGER_MENU, |
| .min = 1, |
| .max = 8, |
| .def = 4, |
| .menu_skip_mask = 0x02, |
| .qmenu_int = vivi_ctrl_int_menu_values, |
| }; |
| |
| static const struct v4l2_file_operations vivi_fops = { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .read = vb2_fop_read, |
| .poll = vb2_fop_poll, |
| .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ |
| .mmap = vb2_fop_mmap, |
| }; |
| |
| static const struct v4l2_ioctl_ops vivi_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_enum_framesizes = vidioc_enum_framesizes, |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, |
| .vidioc_prepare_buf = vb2_ioctl_prepare_buf, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_enum_frameintervals = vidioc_enum_frameintervals, |
| .vidioc_g_parm = vidioc_g_parm, |
| .vidioc_s_parm = vidioc_s_parm, |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static const struct video_device vivi_template = { |
| .name = "vivi", |
| .fops = &vivi_fops, |
| .ioctl_ops = &vivi_ioctl_ops, |
| .release = video_device_release_empty, |
| }; |
| |
| /* ----------------------------------------------------------------- |
| Initialization and module stuff |
| ------------------------------------------------------------------*/ |
| |
| static int vivi_release(void) |
| { |
| struct vivi_dev *dev; |
| struct list_head *list; |
| |
| while (!list_empty(&vivi_devlist)) { |
| list = vivi_devlist.next; |
| list_del(list); |
| dev = list_entry(list, struct vivi_dev, vivi_devlist); |
| |
| v4l2_info(&dev->v4l2_dev, "unregistering %s\n", |
| video_device_node_name(&dev->vdev)); |
| video_unregister_device(&dev->vdev); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| v4l2_ctrl_handler_free(&dev->ctrl_handler); |
| kfree(dev); |
| } |
| |
| return 0; |
| } |
| |
| static int __init vivi_create_instance(int inst) |
| { |
| struct vivi_dev *dev; |
| struct video_device *vfd; |
| struct v4l2_ctrl_handler *hdl; |
| struct vb2_queue *q; |
| int ret; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), |
| "%s-%03d", VIVI_MODULE_NAME, inst); |
| ret = v4l2_device_register(NULL, &dev->v4l2_dev); |
| if (ret) |
| goto free_dev; |
| |
| dev->fmt = &formats[0]; |
| dev->timeperframe = tpf_default; |
| dev->width = 640; |
| dev->height = 480; |
| dev->pixelsize = dev->fmt->depth / 8; |
| hdl = &dev->ctrl_handler; |
| v4l2_ctrl_handler_init(hdl, 11); |
| dev->volume = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_AUDIO_VOLUME, 0, 255, 1, 200); |
| dev->brightness = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 255, 1, 127); |
| dev->contrast = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 255, 1, 16); |
| dev->saturation = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 255, 1, 127); |
| dev->hue = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_HUE, -128, 127, 1, 0); |
| dev->autogain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_AUTOGAIN, 0, 1, 1, 1); |
| dev->gain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_GAIN, 0, 255, 1, 100); |
| dev->alpha = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, |
| V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 0); |
| dev->button = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_button, NULL); |
| dev->int32 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int32, NULL); |
| dev->int64 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int64, NULL); |
| dev->boolean = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_boolean, NULL); |
| dev->menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_menu, NULL); |
| dev->string = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_string, NULL); |
| dev->bitmask = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_bitmask, NULL); |
| dev->int_menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int_menu, NULL); |
| if (hdl->error) { |
| ret = hdl->error; |
| goto unreg_dev; |
| } |
| v4l2_ctrl_auto_cluster(2, &dev->autogain, 0, true); |
| dev->v4l2_dev.ctrl_handler = hdl; |
| |
| /* initialize locks */ |
| spin_lock_init(&dev->slock); |
| |
| /* initialize queue */ |
| q = &dev->vb_vidq; |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ; |
| q->drv_priv = dev; |
| q->buf_struct_size = sizeof(struct vivi_buffer); |
| q->ops = &vivi_video_qops; |
| q->mem_ops = &vb2_vmalloc_memops; |
| q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| |
| ret = vb2_queue_init(q); |
| if (ret) |
| goto unreg_dev; |
| |
| mutex_init(&dev->mutex); |
| |
| /* init video dma queues */ |
| INIT_LIST_HEAD(&dev->vidq.active); |
| init_waitqueue_head(&dev->vidq.wq); |
| |
| vfd = &dev->vdev; |
| *vfd = vivi_template; |
| vfd->debug = debug; |
| vfd->v4l2_dev = &dev->v4l2_dev; |
| vfd->queue = q; |
| set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); |
| |
| /* |
| * Provide a mutex to v4l2 core. It will be used to protect |
| * all fops and v4l2 ioctls. |
| */ |
| vfd->lock = &dev->mutex; |
| video_set_drvdata(vfd, dev); |
| |
| ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); |
| if (ret < 0) |
| goto unreg_dev; |
| |
| /* Now that everything is fine, let's add it to device list */ |
| list_add_tail(&dev->vivi_devlist, &vivi_devlist); |
| |
| v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n", |
| video_device_node_name(vfd)); |
| return 0; |
| |
| unreg_dev: |
| v4l2_ctrl_handler_free(hdl); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| free_dev: |
| kfree(dev); |
| return ret; |
| } |
| |
| /* This routine allocates from 1 to n_devs virtual drivers. |
| |
| The real maximum number of virtual drivers will depend on how many drivers |
| will succeed. This is limited to the maximum number of devices that |
| videodev supports, which is equal to VIDEO_NUM_DEVICES. |
| */ |
| static int __init vivi_init(void) |
| { |
| const struct font_desc *font = find_font("VGA8x16"); |
| int ret = 0, i; |
| |
| if (font == NULL) { |
| printk(KERN_ERR "vivi: could not find font\n"); |
| return -ENODEV; |
| } |
| font8x16 = font->data; |
| |
| if (n_devs <= 0) |
| n_devs = 1; |
| |
| for (i = 0; i < n_devs; i++) { |
| ret = vivi_create_instance(i); |
| if (ret) { |
| /* If some instantiations succeeded, keep driver */ |
| if (i) |
| ret = 0; |
| break; |
| } |
| } |
| |
| if (ret < 0) { |
| printk(KERN_ERR "vivi: error %d while loading driver\n", ret); |
| return ret; |
| } |
| |
| printk(KERN_INFO "Video Technology Magazine Virtual Video " |
| "Capture Board ver %s successfully loaded.\n", |
| VIVI_VERSION); |
| |
| /* n_devs will reflect the actual number of allocated devices */ |
| n_devs = i; |
| |
| return ret; |
| } |
| |
| static void __exit vivi_exit(void) |
| { |
| vivi_release(); |
| } |
| |
| module_init(vivi_init); |
| module_exit(vivi_exit); |