| /* |
| * serial_tegra.c |
| * |
| * High-speed serial driver for NVIDIA Tegra SoCs |
| * |
| * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. |
| * |
| * Author: Laxman Dewangan <ldewangan@nvidia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/debugfs.h> |
| #include <linux/delay.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pagemap.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset.h> |
| #include <linux/serial.h> |
| #include <linux/serial_8250.h> |
| #include <linux/serial_core.h> |
| #include <linux/serial_reg.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/termios.h> |
| #include <linux/tty.h> |
| #include <linux/tty_flip.h> |
| |
| #define TEGRA_UART_TYPE "TEGRA_UART" |
| #define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE) |
| #define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3) |
| |
| #define TEGRA_UART_RX_DMA_BUFFER_SIZE 4096 |
| #define TEGRA_UART_LSR_TXFIFO_FULL 0x100 |
| #define TEGRA_UART_IER_EORD 0x20 |
| #define TEGRA_UART_MCR_RTS_EN 0x40 |
| #define TEGRA_UART_MCR_CTS_EN 0x20 |
| #define TEGRA_UART_LSR_ANY (UART_LSR_OE | UART_LSR_BI | \ |
| UART_LSR_PE | UART_LSR_FE) |
| #define TEGRA_UART_IRDA_CSR 0x08 |
| #define TEGRA_UART_SIR_ENABLED 0x80 |
| |
| #define TEGRA_UART_TX_PIO 1 |
| #define TEGRA_UART_TX_DMA 2 |
| #define TEGRA_UART_MIN_DMA 16 |
| #define TEGRA_UART_FIFO_SIZE 32 |
| |
| /* |
| * Tx fifo trigger level setting in tegra uart is in |
| * reverse way then conventional uart. |
| */ |
| #define TEGRA_UART_TX_TRIG_16B 0x00 |
| #define TEGRA_UART_TX_TRIG_8B 0x10 |
| #define TEGRA_UART_TX_TRIG_4B 0x20 |
| #define TEGRA_UART_TX_TRIG_1B 0x30 |
| |
| #define TEGRA_UART_MAXIMUM 5 |
| |
| /* Default UART setting when started: 115200 no parity, stop, 8 data bits */ |
| #define TEGRA_UART_DEFAULT_BAUD 115200 |
| #define TEGRA_UART_DEFAULT_LSR UART_LCR_WLEN8 |
| |
| /* Tx transfer mode */ |
| #define TEGRA_TX_PIO 1 |
| #define TEGRA_TX_DMA 2 |
| |
| /** |
| * tegra_uart_chip_data: SOC specific data. |
| * |
| * @tx_fifo_full_status: Status flag available for checking tx fifo full. |
| * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not. |
| * Tegra30 does not allow this. |
| * @support_clk_src_div: Clock source support the clock divider. |
| */ |
| struct tegra_uart_chip_data { |
| bool tx_fifo_full_status; |
| bool allow_txfifo_reset_fifo_mode; |
| bool support_clk_src_div; |
| }; |
| |
| struct tegra_uart_port { |
| struct uart_port uport; |
| const struct tegra_uart_chip_data *cdata; |
| |
| struct clk *uart_clk; |
| struct reset_control *rst; |
| unsigned int current_baud; |
| |
| /* Register shadow */ |
| unsigned long fcr_shadow; |
| unsigned long mcr_shadow; |
| unsigned long lcr_shadow; |
| unsigned long ier_shadow; |
| bool rts_active; |
| |
| int tx_in_progress; |
| unsigned int tx_bytes; |
| |
| bool enable_modem_interrupt; |
| |
| bool rx_timeout; |
| int rx_in_progress; |
| int symb_bit; |
| |
| struct dma_chan *rx_dma_chan; |
| struct dma_chan *tx_dma_chan; |
| dma_addr_t rx_dma_buf_phys; |
| dma_addr_t tx_dma_buf_phys; |
| unsigned char *rx_dma_buf_virt; |
| unsigned char *tx_dma_buf_virt; |
| struct dma_async_tx_descriptor *tx_dma_desc; |
| struct dma_async_tx_descriptor *rx_dma_desc; |
| dma_cookie_t tx_cookie; |
| dma_cookie_t rx_cookie; |
| int tx_bytes_requested; |
| int rx_bytes_requested; |
| }; |
| |
| static void tegra_uart_start_next_tx(struct tegra_uart_port *tup); |
| static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup); |
| |
| static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup, |
| unsigned long reg) |
| { |
| return readl(tup->uport.membase + (reg << tup->uport.regshift)); |
| } |
| |
| static inline void tegra_uart_write(struct tegra_uart_port *tup, unsigned val, |
| unsigned long reg) |
| { |
| writel(val, tup->uport.membase + (reg << tup->uport.regshift)); |
| } |
| |
| static inline struct tegra_uart_port *to_tegra_uport(struct uart_port *u) |
| { |
| return container_of(u, struct tegra_uart_port, uport); |
| } |
| |
| static unsigned int tegra_uart_get_mctrl(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| |
| /* |
| * RI - Ring detector is active |
| * CD/DCD/CAR - Carrier detect is always active. For some reason |
| * linux has different names for carrier detect. |
| * DSR - Data Set ready is active as the hardware doesn't support it. |
| * Don't know if the linux support this yet? |
| * CTS - Clear to send. Always set to active, as the hardware handles |
| * CTS automatically. |
| */ |
| if (tup->enable_modem_interrupt) |
| return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS; |
| return TIOCM_CTS; |
| } |
| |
| static void set_rts(struct tegra_uart_port *tup, bool active) |
| { |
| unsigned long mcr; |
| |
| mcr = tup->mcr_shadow; |
| if (active) |
| mcr |= TEGRA_UART_MCR_RTS_EN; |
| else |
| mcr &= ~TEGRA_UART_MCR_RTS_EN; |
| if (mcr != tup->mcr_shadow) { |
| tegra_uart_write(tup, mcr, UART_MCR); |
| tup->mcr_shadow = mcr; |
| } |
| return; |
| } |
| |
| static void set_dtr(struct tegra_uart_port *tup, bool active) |
| { |
| unsigned long mcr; |
| |
| mcr = tup->mcr_shadow; |
| if (active) |
| mcr |= UART_MCR_DTR; |
| else |
| mcr &= ~UART_MCR_DTR; |
| if (mcr != tup->mcr_shadow) { |
| tegra_uart_write(tup, mcr, UART_MCR); |
| tup->mcr_shadow = mcr; |
| } |
| return; |
| } |
| |
| static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| unsigned long mcr; |
| int dtr_enable; |
| |
| mcr = tup->mcr_shadow; |
| tup->rts_active = !!(mctrl & TIOCM_RTS); |
| set_rts(tup, tup->rts_active); |
| |
| dtr_enable = !!(mctrl & TIOCM_DTR); |
| set_dtr(tup, dtr_enable); |
| return; |
| } |
| |
| static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| unsigned long lcr; |
| |
| lcr = tup->lcr_shadow; |
| if (break_ctl) |
| lcr |= UART_LCR_SBC; |
| else |
| lcr &= ~UART_LCR_SBC; |
| tegra_uart_write(tup, lcr, UART_LCR); |
| tup->lcr_shadow = lcr; |
| } |
| |
| /* Wait for a symbol-time. */ |
| static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup, |
| unsigned int syms) |
| { |
| if (tup->current_baud) |
| udelay(DIV_ROUND_UP(syms * tup->symb_bit * 1000000, |
| tup->current_baud)); |
| } |
| |
| static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) |
| { |
| unsigned long fcr = tup->fcr_shadow; |
| |
| if (tup->cdata->allow_txfifo_reset_fifo_mode) { |
| fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); |
| tegra_uart_write(tup, fcr, UART_FCR); |
| } else { |
| fcr &= ~UART_FCR_ENABLE_FIFO; |
| tegra_uart_write(tup, fcr, UART_FCR); |
| udelay(60); |
| fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); |
| tegra_uart_write(tup, fcr, UART_FCR); |
| fcr |= UART_FCR_ENABLE_FIFO; |
| tegra_uart_write(tup, fcr, UART_FCR); |
| } |
| |
| /* Dummy read to ensure the write is posted */ |
| tegra_uart_read(tup, UART_SCR); |
| |
| /* Wait for the flush to propagate. */ |
| tegra_uart_wait_sym_time(tup, 1); |
| } |
| |
| static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud) |
| { |
| unsigned long rate; |
| unsigned int divisor; |
| unsigned long lcr; |
| int ret; |
| |
| if (tup->current_baud == baud) |
| return 0; |
| |
| if (tup->cdata->support_clk_src_div) { |
| rate = baud * 16; |
| ret = clk_set_rate(tup->uart_clk, rate); |
| if (ret < 0) { |
| dev_err(tup->uport.dev, |
| "clk_set_rate() failed for rate %lu\n", rate); |
| return ret; |
| } |
| divisor = 1; |
| } else { |
| rate = clk_get_rate(tup->uart_clk); |
| divisor = DIV_ROUND_CLOSEST(rate, baud * 16); |
| } |
| |
| lcr = tup->lcr_shadow; |
| lcr |= UART_LCR_DLAB; |
| tegra_uart_write(tup, lcr, UART_LCR); |
| |
| tegra_uart_write(tup, divisor & 0xFF, UART_TX); |
| tegra_uart_write(tup, ((divisor >> 8) & 0xFF), UART_IER); |
| |
| lcr &= ~UART_LCR_DLAB; |
| tegra_uart_write(tup, lcr, UART_LCR); |
| |
| /* Dummy read to ensure the write is posted */ |
| tegra_uart_read(tup, UART_SCR); |
| |
| tup->current_baud = baud; |
| |
| /* wait two character intervals at new rate */ |
| tegra_uart_wait_sym_time(tup, 2); |
| return 0; |
| } |
| |
| static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup, |
| unsigned long lsr) |
| { |
| char flag = TTY_NORMAL; |
| |
| if (unlikely(lsr & TEGRA_UART_LSR_ANY)) { |
| if (lsr & UART_LSR_OE) { |
| /* Overrrun error */ |
| flag |= TTY_OVERRUN; |
| tup->uport.icount.overrun++; |
| dev_err(tup->uport.dev, "Got overrun errors\n"); |
| } else if (lsr & UART_LSR_PE) { |
| /* Parity error */ |
| flag |= TTY_PARITY; |
| tup->uport.icount.parity++; |
| dev_err(tup->uport.dev, "Got Parity errors\n"); |
| } else if (lsr & UART_LSR_FE) { |
| flag |= TTY_FRAME; |
| tup->uport.icount.frame++; |
| dev_err(tup->uport.dev, "Got frame errors\n"); |
| } else if (lsr & UART_LSR_BI) { |
| dev_err(tup->uport.dev, "Got Break\n"); |
| tup->uport.icount.brk++; |
| /* If FIFO read error without any data, reset Rx FIFO */ |
| if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE)) |
| tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR); |
| } |
| } |
| return flag; |
| } |
| |
| static int tegra_uart_request_port(struct uart_port *u) |
| { |
| return 0; |
| } |
| |
| static void tegra_uart_release_port(struct uart_port *u) |
| { |
| /* Nothing to do here */ |
| } |
| |
| static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes) |
| { |
| struct circ_buf *xmit = &tup->uport.state->xmit; |
| int i; |
| |
| for (i = 0; i < max_bytes; i++) { |
| BUG_ON(uart_circ_empty(xmit)); |
| if (tup->cdata->tx_fifo_full_status) { |
| unsigned long lsr = tegra_uart_read(tup, UART_LSR); |
| if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL)) |
| break; |
| } |
| tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX); |
| xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| tup->uport.icount.tx++; |
| } |
| } |
| |
| static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup, |
| unsigned int bytes) |
| { |
| if (bytes > TEGRA_UART_MIN_DMA) |
| bytes = TEGRA_UART_MIN_DMA; |
| |
| tup->tx_in_progress = TEGRA_UART_TX_PIO; |
| tup->tx_bytes = bytes; |
| tup->ier_shadow |= UART_IER_THRI; |
| tegra_uart_write(tup, tup->ier_shadow, UART_IER); |
| } |
| |
| static void tegra_uart_tx_dma_complete(void *args) |
| { |
| struct tegra_uart_port *tup = args; |
| struct circ_buf *xmit = &tup->uport.state->xmit; |
| struct dma_tx_state state; |
| unsigned long flags; |
| int count; |
| |
| dmaengine_tx_status(tup->tx_dma_chan, tup->rx_cookie, &state); |
| count = tup->tx_bytes_requested - state.residue; |
| async_tx_ack(tup->tx_dma_desc); |
| spin_lock_irqsave(&tup->uport.lock, flags); |
| xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); |
| tup->tx_in_progress = 0; |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(&tup->uport); |
| tegra_uart_start_next_tx(tup); |
| spin_unlock_irqrestore(&tup->uport.lock, flags); |
| } |
| |
| static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup, |
| unsigned long count) |
| { |
| struct circ_buf *xmit = &tup->uport.state->xmit; |
| dma_addr_t tx_phys_addr; |
| |
| dma_sync_single_for_device(tup->uport.dev, tup->tx_dma_buf_phys, |
| UART_XMIT_SIZE, DMA_TO_DEVICE); |
| |
| tup->tx_bytes = count & ~(0xF); |
| tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail; |
| tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan, |
| tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV, |
| DMA_PREP_INTERRUPT); |
| if (!tup->tx_dma_desc) { |
| dev_err(tup->uport.dev, "Not able to get desc for Tx\n"); |
| return -EIO; |
| } |
| |
| tup->tx_dma_desc->callback = tegra_uart_tx_dma_complete; |
| tup->tx_dma_desc->callback_param = tup; |
| tup->tx_in_progress = TEGRA_UART_TX_DMA; |
| tup->tx_bytes_requested = tup->tx_bytes; |
| tup->tx_cookie = dmaengine_submit(tup->tx_dma_desc); |
| dma_async_issue_pending(tup->tx_dma_chan); |
| return 0; |
| } |
| |
| static void tegra_uart_start_next_tx(struct tegra_uart_port *tup) |
| { |
| unsigned long tail; |
| unsigned long count; |
| struct circ_buf *xmit = &tup->uport.state->xmit; |
| |
| tail = (unsigned long)&xmit->buf[xmit->tail]; |
| count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); |
| if (!count) |
| return; |
| |
| if (count < TEGRA_UART_MIN_DMA) |
| tegra_uart_start_pio_tx(tup, count); |
| else if (BYTES_TO_ALIGN(tail) > 0) |
| tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail)); |
| else |
| tegra_uart_start_tx_dma(tup, count); |
| } |
| |
| /* Called by serial core driver with u->lock taken. */ |
| static void tegra_uart_start_tx(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| struct circ_buf *xmit = &u->state->xmit; |
| |
| if (!uart_circ_empty(xmit) && !tup->tx_in_progress) |
| tegra_uart_start_next_tx(tup); |
| } |
| |
| static unsigned int tegra_uart_tx_empty(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| unsigned int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&u->lock, flags); |
| if (!tup->tx_in_progress) { |
| unsigned long lsr = tegra_uart_read(tup, UART_LSR); |
| if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS) |
| ret = TIOCSER_TEMT; |
| } |
| spin_unlock_irqrestore(&u->lock, flags); |
| return ret; |
| } |
| |
| static void tegra_uart_stop_tx(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| struct circ_buf *xmit = &tup->uport.state->xmit; |
| struct dma_tx_state state; |
| int count; |
| |
| if (tup->tx_in_progress != TEGRA_UART_TX_DMA) |
| return; |
| |
| dmaengine_terminate_all(tup->tx_dma_chan); |
| dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); |
| count = tup->tx_bytes_requested - state.residue; |
| async_tx_ack(tup->tx_dma_desc); |
| xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); |
| tup->tx_in_progress = 0; |
| return; |
| } |
| |
| static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup) |
| { |
| struct circ_buf *xmit = &tup->uport.state->xmit; |
| |
| tegra_uart_fill_tx_fifo(tup, tup->tx_bytes); |
| tup->tx_in_progress = 0; |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(&tup->uport); |
| tegra_uart_start_next_tx(tup); |
| return; |
| } |
| |
| static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, |
| struct tty_port *tty) |
| { |
| do { |
| char flag = TTY_NORMAL; |
| unsigned long lsr = 0; |
| unsigned char ch; |
| |
| lsr = tegra_uart_read(tup, UART_LSR); |
| if (!(lsr & UART_LSR_DR)) |
| break; |
| |
| flag = tegra_uart_decode_rx_error(tup, lsr); |
| ch = (unsigned char) tegra_uart_read(tup, UART_RX); |
| tup->uport.icount.rx++; |
| |
| if (!uart_handle_sysrq_char(&tup->uport, ch) && tty) |
| tty_insert_flip_char(tty, ch, flag); |
| } while (1); |
| |
| return; |
| } |
| |
| static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, |
| struct tty_port *tty, int count) |
| { |
| int copied; |
| |
| tup->uport.icount.rx += count; |
| if (!tty) { |
| dev_err(tup->uport.dev, "No tty port\n"); |
| return; |
| } |
| dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys, |
| TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); |
| copied = tty_insert_flip_string(tty, |
| ((unsigned char *)(tup->rx_dma_buf_virt)), count); |
| if (copied != count) { |
| WARN_ON(1); |
| dev_err(tup->uport.dev, "RxData copy to tty layer failed\n"); |
| } |
| dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys, |
| TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); |
| } |
| |
| static void tegra_uart_rx_dma_complete(void *args) |
| { |
| struct tegra_uart_port *tup = args; |
| struct uart_port *u = &tup->uport; |
| int count = tup->rx_bytes_requested; |
| struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); |
| struct tty_port *port = &u->state->port; |
| unsigned long flags; |
| |
| async_tx_ack(tup->rx_dma_desc); |
| spin_lock_irqsave(&u->lock, flags); |
| |
| /* Deactivate flow control to stop sender */ |
| if (tup->rts_active) |
| set_rts(tup, false); |
| |
| /* If we are here, DMA is stopped */ |
| if (count) |
| tegra_uart_copy_rx_to_tty(tup, port, count); |
| |
| tegra_uart_handle_rx_pio(tup, port); |
| if (tty) { |
| spin_unlock_irqrestore(&u->lock, flags); |
| tty_flip_buffer_push(port); |
| spin_lock_irqsave(&u->lock, flags); |
| tty_kref_put(tty); |
| } |
| tegra_uart_start_rx_dma(tup); |
| |
| /* Activate flow control to start transfer */ |
| if (tup->rts_active) |
| set_rts(tup, true); |
| |
| spin_unlock_irqrestore(&u->lock, flags); |
| } |
| |
| static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup, |
| unsigned long *flags) |
| { |
| struct dma_tx_state state; |
| struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); |
| struct tty_port *port = &tup->uport.state->port; |
| struct uart_port *u = &tup->uport; |
| int count; |
| |
| /* Deactivate flow control to stop sender */ |
| if (tup->rts_active) |
| set_rts(tup, false); |
| |
| dmaengine_terminate_all(tup->rx_dma_chan); |
| dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); |
| async_tx_ack(tup->rx_dma_desc); |
| count = tup->rx_bytes_requested - state.residue; |
| |
| /* If we are here, DMA is stopped */ |
| if (count) |
| tegra_uart_copy_rx_to_tty(tup, port, count); |
| |
| tegra_uart_handle_rx_pio(tup, port); |
| if (tty) { |
| spin_unlock_irqrestore(&u->lock, *flags); |
| tty_flip_buffer_push(port); |
| spin_lock_irqsave(&u->lock, *flags); |
| tty_kref_put(tty); |
| } |
| tegra_uart_start_rx_dma(tup); |
| |
| if (tup->rts_active) |
| set_rts(tup, true); |
| } |
| |
| static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup) |
| { |
| unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE; |
| |
| tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan, |
| tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT); |
| if (!tup->rx_dma_desc) { |
| dev_err(tup->uport.dev, "Not able to get desc for Rx\n"); |
| return -EIO; |
| } |
| |
| tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete; |
| tup->rx_dma_desc->callback_param = tup; |
| dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys, |
| count, DMA_TO_DEVICE); |
| tup->rx_bytes_requested = count; |
| tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc); |
| dma_async_issue_pending(tup->rx_dma_chan); |
| return 0; |
| } |
| |
| static void tegra_uart_handle_modem_signal_change(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| unsigned long msr; |
| |
| msr = tegra_uart_read(tup, UART_MSR); |
| if (!(msr & UART_MSR_ANY_DELTA)) |
| return; |
| |
| if (msr & UART_MSR_TERI) |
| tup->uport.icount.rng++; |
| if (msr & UART_MSR_DDSR) |
| tup->uport.icount.dsr++; |
| /* We may only get DDCD when HW init and reset */ |
| if (msr & UART_MSR_DDCD) |
| uart_handle_dcd_change(&tup->uport, msr & UART_MSR_DCD); |
| /* Will start/stop_tx accordingly */ |
| if (msr & UART_MSR_DCTS) |
| uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS); |
| return; |
| } |
| |
| static irqreturn_t tegra_uart_isr(int irq, void *data) |
| { |
| struct tegra_uart_port *tup = data; |
| struct uart_port *u = &tup->uport; |
| unsigned long iir; |
| unsigned long ier; |
| bool is_rx_int = false; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&u->lock, flags); |
| while (1) { |
| iir = tegra_uart_read(tup, UART_IIR); |
| if (iir & UART_IIR_NO_INT) { |
| if (is_rx_int) { |
| tegra_uart_handle_rx_dma(tup, &flags); |
| if (tup->rx_in_progress) { |
| ier = tup->ier_shadow; |
| ier |= (UART_IER_RLSI | UART_IER_RTOIE | |
| TEGRA_UART_IER_EORD); |
| tup->ier_shadow = ier; |
| tegra_uart_write(tup, ier, UART_IER); |
| } |
| } |
| spin_unlock_irqrestore(&u->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| switch ((iir >> 1) & 0x7) { |
| case 0: /* Modem signal change interrupt */ |
| tegra_uart_handle_modem_signal_change(u); |
| break; |
| |
| case 1: /* Transmit interrupt only triggered when using PIO */ |
| tup->ier_shadow &= ~UART_IER_THRI; |
| tegra_uart_write(tup, tup->ier_shadow, UART_IER); |
| tegra_uart_handle_tx_pio(tup); |
| break; |
| |
| case 4: /* End of data */ |
| case 6: /* Rx timeout */ |
| case 2: /* Receive */ |
| if (!is_rx_int) { |
| is_rx_int = true; |
| /* Disable Rx interrupts */ |
| ier = tup->ier_shadow; |
| ier |= UART_IER_RDI; |
| tegra_uart_write(tup, ier, UART_IER); |
| ier &= ~(UART_IER_RDI | UART_IER_RLSI | |
| UART_IER_RTOIE | TEGRA_UART_IER_EORD); |
| tup->ier_shadow = ier; |
| tegra_uart_write(tup, ier, UART_IER); |
| } |
| break; |
| |
| case 3: /* Receive error */ |
| tegra_uart_decode_rx_error(tup, |
| tegra_uart_read(tup, UART_LSR)); |
| break; |
| |
| case 5: /* break nothing to handle */ |
| case 7: /* break nothing to handle */ |
| break; |
| } |
| } |
| } |
| |
| static void tegra_uart_stop_rx(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| struct tty_struct *tty; |
| struct tty_port *port = &u->state->port; |
| struct dma_tx_state state; |
| unsigned long ier; |
| int count; |
| |
| if (tup->rts_active) |
| set_rts(tup, false); |
| |
| if (!tup->rx_in_progress) |
| return; |
| |
| tty = tty_port_tty_get(&tup->uport.state->port); |
| |
| tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */ |
| |
| ier = tup->ier_shadow; |
| ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | |
| TEGRA_UART_IER_EORD); |
| tup->ier_shadow = ier; |
| tegra_uart_write(tup, ier, UART_IER); |
| tup->rx_in_progress = 0; |
| if (tup->rx_dma_chan) { |
| dmaengine_terminate_all(tup->rx_dma_chan); |
| dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); |
| async_tx_ack(tup->rx_dma_desc); |
| count = tup->rx_bytes_requested - state.residue; |
| tegra_uart_copy_rx_to_tty(tup, port, count); |
| tegra_uart_handle_rx_pio(tup, port); |
| } else { |
| tegra_uart_handle_rx_pio(tup, port); |
| } |
| if (tty) { |
| tty_flip_buffer_push(port); |
| tty_kref_put(tty); |
| } |
| return; |
| } |
| |
| static void tegra_uart_hw_deinit(struct tegra_uart_port *tup) |
| { |
| unsigned long flags; |
| unsigned long char_time = DIV_ROUND_UP(10000000, tup->current_baud); |
| unsigned long fifo_empty_time = tup->uport.fifosize * char_time; |
| unsigned long wait_time; |
| unsigned long lsr; |
| unsigned long msr; |
| unsigned long mcr; |
| |
| /* Disable interrupts */ |
| tegra_uart_write(tup, 0, UART_IER); |
| |
| lsr = tegra_uart_read(tup, UART_LSR); |
| if ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) { |
| msr = tegra_uart_read(tup, UART_MSR); |
| mcr = tegra_uart_read(tup, UART_MCR); |
| if ((mcr & TEGRA_UART_MCR_CTS_EN) && (msr & UART_MSR_CTS)) |
| dev_err(tup->uport.dev, |
| "Tx Fifo not empty, CTS disabled, waiting\n"); |
| |
| /* Wait for Tx fifo to be empty */ |
| while ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) { |
| wait_time = min(fifo_empty_time, 100lu); |
| udelay(wait_time); |
| fifo_empty_time -= wait_time; |
| if (!fifo_empty_time) { |
| msr = tegra_uart_read(tup, UART_MSR); |
| mcr = tegra_uart_read(tup, UART_MCR); |
| if ((mcr & TEGRA_UART_MCR_CTS_EN) && |
| (msr & UART_MSR_CTS)) |
| dev_err(tup->uport.dev, |
| "Slave not ready\n"); |
| break; |
| } |
| lsr = tegra_uart_read(tup, UART_LSR); |
| } |
| } |
| |
| spin_lock_irqsave(&tup->uport.lock, flags); |
| /* Reset the Rx and Tx FIFOs */ |
| tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); |
| tup->current_baud = 0; |
| spin_unlock_irqrestore(&tup->uport.lock, flags); |
| |
| clk_disable_unprepare(tup->uart_clk); |
| } |
| |
| static int tegra_uart_hw_init(struct tegra_uart_port *tup) |
| { |
| int ret; |
| |
| tup->fcr_shadow = 0; |
| tup->mcr_shadow = 0; |
| tup->lcr_shadow = 0; |
| tup->ier_shadow = 0; |
| tup->current_baud = 0; |
| |
| clk_prepare_enable(tup->uart_clk); |
| |
| /* Reset the UART controller to clear all previous status.*/ |
| reset_control_assert(tup->rst); |
| udelay(10); |
| reset_control_deassert(tup->rst); |
| |
| tup->rx_in_progress = 0; |
| tup->tx_in_progress = 0; |
| |
| /* |
| * Set the trigger level |
| * |
| * For PIO mode: |
| * |
| * For receive, this will interrupt the CPU after that many number of |
| * bytes are received, for the remaining bytes the receive timeout |
| * interrupt is received. Rx high watermark is set to 4. |
| * |
| * For transmit, if the trasnmit interrupt is enabled, this will |
| * interrupt the CPU when the number of entries in the FIFO reaches the |
| * low watermark. Tx low watermark is set to 16 bytes. |
| * |
| * For DMA mode: |
| * |
| * Set the Tx trigger to 16. This should match the DMA burst size that |
| * programmed in the DMA registers. |
| */ |
| tup->fcr_shadow = UART_FCR_ENABLE_FIFO; |
| tup->fcr_shadow |= UART_FCR_R_TRIG_01; |
| tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B; |
| tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); |
| |
| /* |
| * Initialize the UART with default configuration |
| * (115200, N, 8, 1) so that the receive DMA buffer may be |
| * enqueued |
| */ |
| tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR; |
| tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD); |
| tup->fcr_shadow |= UART_FCR_DMA_SELECT; |
| tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); |
| |
| ret = tegra_uart_start_rx_dma(tup); |
| if (ret < 0) { |
| dev_err(tup->uport.dev, "Not able to start Rx DMA\n"); |
| return ret; |
| } |
| tup->rx_in_progress = 1; |
| |
| /* |
| * Enable IE_RXS for the receive status interrupts like line errros. |
| * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd. |
| * |
| * If using DMA mode, enable EORD instead of receive interrupt which |
| * will interrupt after the UART is done with the receive instead of |
| * the interrupt when the FIFO "threshold" is reached. |
| * |
| * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when |
| * the DATA is sitting in the FIFO and couldn't be transferred to the |
| * DMA as the DMA size alignment(4 bytes) is not met. EORD will be |
| * triggered when there is a pause of the incomming data stream for 4 |
| * characters long. |
| * |
| * For pauses in the data which is not aligned to 4 bytes, we get |
| * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first |
| * then the EORD. |
| */ |
| tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD; |
| tegra_uart_write(tup, tup->ier_shadow, UART_IER); |
| return 0; |
| } |
| |
| static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, |
| bool dma_to_memory) |
| { |
| struct dma_chan *dma_chan; |
| unsigned char *dma_buf; |
| dma_addr_t dma_phys; |
| int ret; |
| struct dma_slave_config dma_sconfig; |
| |
| dma_chan = dma_request_slave_channel_reason(tup->uport.dev, |
| dma_to_memory ? "rx" : "tx"); |
| if (IS_ERR(dma_chan)) { |
| ret = PTR_ERR(dma_chan); |
| dev_err(tup->uport.dev, |
| "DMA channel alloc failed: %d\n", ret); |
| return ret; |
| } |
| |
| if (dma_to_memory) { |
| dma_buf = dma_alloc_coherent(tup->uport.dev, |
| TEGRA_UART_RX_DMA_BUFFER_SIZE, |
| &dma_phys, GFP_KERNEL); |
| if (!dma_buf) { |
| dev_err(tup->uport.dev, |
| "Not able to allocate the dma buffer\n"); |
| dma_release_channel(dma_chan); |
| return -ENOMEM; |
| } |
| } else { |
| dma_phys = dma_map_single(tup->uport.dev, |
| tup->uport.state->xmit.buf, UART_XMIT_SIZE, |
| DMA_TO_DEVICE); |
| dma_buf = tup->uport.state->xmit.buf; |
| } |
| |
| if (dma_to_memory) { |
| dma_sconfig.src_addr = tup->uport.mapbase; |
| dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| dma_sconfig.src_maxburst = 4; |
| } else { |
| dma_sconfig.dst_addr = tup->uport.mapbase; |
| dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| dma_sconfig.dst_maxburst = 16; |
| } |
| |
| ret = dmaengine_slave_config(dma_chan, &dma_sconfig); |
| if (ret < 0) { |
| dev_err(tup->uport.dev, |
| "Dma slave config failed, err = %d\n", ret); |
| goto scrub; |
| } |
| |
| if (dma_to_memory) { |
| tup->rx_dma_chan = dma_chan; |
| tup->rx_dma_buf_virt = dma_buf; |
| tup->rx_dma_buf_phys = dma_phys; |
| } else { |
| tup->tx_dma_chan = dma_chan; |
| tup->tx_dma_buf_virt = dma_buf; |
| tup->tx_dma_buf_phys = dma_phys; |
| } |
| return 0; |
| |
| scrub: |
| dma_release_channel(dma_chan); |
| return ret; |
| } |
| |
| static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, |
| bool dma_to_memory) |
| { |
| struct dma_chan *dma_chan; |
| |
| if (dma_to_memory) { |
| dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE, |
| tup->rx_dma_buf_virt, tup->rx_dma_buf_phys); |
| dma_chan = tup->rx_dma_chan; |
| tup->rx_dma_chan = NULL; |
| tup->rx_dma_buf_phys = 0; |
| tup->rx_dma_buf_virt = NULL; |
| } else { |
| dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys, |
| UART_XMIT_SIZE, DMA_TO_DEVICE); |
| dma_chan = tup->tx_dma_chan; |
| tup->tx_dma_chan = NULL; |
| tup->tx_dma_buf_phys = 0; |
| tup->tx_dma_buf_virt = NULL; |
| } |
| dma_release_channel(dma_chan); |
| } |
| |
| static int tegra_uart_startup(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| int ret; |
| |
| ret = tegra_uart_dma_channel_allocate(tup, false); |
| if (ret < 0) { |
| dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret); |
| return ret; |
| } |
| |
| ret = tegra_uart_dma_channel_allocate(tup, true); |
| if (ret < 0) { |
| dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret); |
| goto fail_rx_dma; |
| } |
| |
| ret = tegra_uart_hw_init(tup); |
| if (ret < 0) { |
| dev_err(u->dev, "Uart HW init failed, err = %d\n", ret); |
| goto fail_hw_init; |
| } |
| |
| ret = request_irq(u->irq, tegra_uart_isr, 0, |
| dev_name(u->dev), tup); |
| if (ret < 0) { |
| dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq); |
| goto fail_hw_init; |
| } |
| return 0; |
| |
| fail_hw_init: |
| tegra_uart_dma_channel_free(tup, true); |
| fail_rx_dma: |
| tegra_uart_dma_channel_free(tup, false); |
| return ret; |
| } |
| |
| static void tegra_uart_shutdown(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| |
| tegra_uart_hw_deinit(tup); |
| |
| tup->rx_in_progress = 0; |
| tup->tx_in_progress = 0; |
| |
| tegra_uart_dma_channel_free(tup, true); |
| tegra_uart_dma_channel_free(tup, false); |
| free_irq(u->irq, tup); |
| } |
| |
| static void tegra_uart_enable_ms(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| |
| if (tup->enable_modem_interrupt) { |
| tup->ier_shadow |= UART_IER_MSI; |
| tegra_uart_write(tup, tup->ier_shadow, UART_IER); |
| } |
| } |
| |
| static void tegra_uart_set_termios(struct uart_port *u, |
| struct ktermios *termios, struct ktermios *oldtermios) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| unsigned int baud; |
| unsigned long flags; |
| unsigned int lcr; |
| int symb_bit = 1; |
| struct clk *parent_clk = clk_get_parent(tup->uart_clk); |
| unsigned long parent_clk_rate = clk_get_rate(parent_clk); |
| int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF; |
| |
| max_divider *= 16; |
| spin_lock_irqsave(&u->lock, flags); |
| |
| /* Changing configuration, it is safe to stop any rx now */ |
| if (tup->rts_active) |
| set_rts(tup, false); |
| |
| /* Clear all interrupts as configuration is going to be change */ |
| tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER); |
| tegra_uart_read(tup, UART_IER); |
| tegra_uart_write(tup, 0, UART_IER); |
| tegra_uart_read(tup, UART_IER); |
| |
| /* Parity */ |
| lcr = tup->lcr_shadow; |
| lcr &= ~UART_LCR_PARITY; |
| |
| /* CMSPAR isn't supported by this driver */ |
| termios->c_cflag &= ~CMSPAR; |
| |
| if ((termios->c_cflag & PARENB) == PARENB) { |
| symb_bit++; |
| if (termios->c_cflag & PARODD) { |
| lcr |= UART_LCR_PARITY; |
| lcr &= ~UART_LCR_EPAR; |
| lcr &= ~UART_LCR_SPAR; |
| } else { |
| lcr |= UART_LCR_PARITY; |
| lcr |= UART_LCR_EPAR; |
| lcr &= ~UART_LCR_SPAR; |
| } |
| } |
| |
| lcr &= ~UART_LCR_WLEN8; |
| switch (termios->c_cflag & CSIZE) { |
| case CS5: |
| lcr |= UART_LCR_WLEN5; |
| symb_bit += 5; |
| break; |
| case CS6: |
| lcr |= UART_LCR_WLEN6; |
| symb_bit += 6; |
| break; |
| case CS7: |
| lcr |= UART_LCR_WLEN7; |
| symb_bit += 7; |
| break; |
| default: |
| lcr |= UART_LCR_WLEN8; |
| symb_bit += 8; |
| break; |
| } |
| |
| /* Stop bits */ |
| if (termios->c_cflag & CSTOPB) { |
| lcr |= UART_LCR_STOP; |
| symb_bit += 2; |
| } else { |
| lcr &= ~UART_LCR_STOP; |
| symb_bit++; |
| } |
| |
| tegra_uart_write(tup, lcr, UART_LCR); |
| tup->lcr_shadow = lcr; |
| tup->symb_bit = symb_bit; |
| |
| /* Baud rate. */ |
| baud = uart_get_baud_rate(u, termios, oldtermios, |
| parent_clk_rate/max_divider, |
| parent_clk_rate/16); |
| spin_unlock_irqrestore(&u->lock, flags); |
| tegra_set_baudrate(tup, baud); |
| if (tty_termios_baud_rate(termios)) |
| tty_termios_encode_baud_rate(termios, baud, baud); |
| spin_lock_irqsave(&u->lock, flags); |
| |
| /* Flow control */ |
| if (termios->c_cflag & CRTSCTS) { |
| tup->mcr_shadow |= TEGRA_UART_MCR_CTS_EN; |
| tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN; |
| tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); |
| /* if top layer has asked to set rts active then do so here */ |
| if (tup->rts_active) |
| set_rts(tup, true); |
| } else { |
| tup->mcr_shadow &= ~TEGRA_UART_MCR_CTS_EN; |
| tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN; |
| tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); |
| } |
| |
| /* update the port timeout based on new settings */ |
| uart_update_timeout(u, termios->c_cflag, baud); |
| |
| /* Make sure all write has completed */ |
| tegra_uart_read(tup, UART_IER); |
| |
| /* Reenable interrupt */ |
| tegra_uart_write(tup, tup->ier_shadow, UART_IER); |
| tegra_uart_read(tup, UART_IER); |
| |
| spin_unlock_irqrestore(&u->lock, flags); |
| return; |
| } |
| |
| /* |
| * Flush any TX data submitted for DMA and PIO. Called when the |
| * TX circular buffer is reset. |
| */ |
| static void tegra_uart_flush_buffer(struct uart_port *u) |
| { |
| struct tegra_uart_port *tup = to_tegra_uport(u); |
| |
| tup->tx_bytes = 0; |
| if (tup->tx_dma_chan) |
| dmaengine_terminate_all(tup->tx_dma_chan); |
| return; |
| } |
| |
| static const char *tegra_uart_type(struct uart_port *u) |
| { |
| return TEGRA_UART_TYPE; |
| } |
| |
| static struct uart_ops tegra_uart_ops = { |
| .tx_empty = tegra_uart_tx_empty, |
| .set_mctrl = tegra_uart_set_mctrl, |
| .get_mctrl = tegra_uart_get_mctrl, |
| .stop_tx = tegra_uart_stop_tx, |
| .start_tx = tegra_uart_start_tx, |
| .stop_rx = tegra_uart_stop_rx, |
| .flush_buffer = tegra_uart_flush_buffer, |
| .enable_ms = tegra_uart_enable_ms, |
| .break_ctl = tegra_uart_break_ctl, |
| .startup = tegra_uart_startup, |
| .shutdown = tegra_uart_shutdown, |
| .set_termios = tegra_uart_set_termios, |
| .type = tegra_uart_type, |
| .request_port = tegra_uart_request_port, |
| .release_port = tegra_uart_release_port, |
| }; |
| |
| static struct uart_driver tegra_uart_driver = { |
| .owner = THIS_MODULE, |
| .driver_name = "tegra_hsuart", |
| .dev_name = "ttyTHS", |
| .cons = NULL, |
| .nr = TEGRA_UART_MAXIMUM, |
| }; |
| |
| static int tegra_uart_parse_dt(struct platform_device *pdev, |
| struct tegra_uart_port *tup) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| int port; |
| |
| port = of_alias_get_id(np, "serial"); |
| if (port < 0) { |
| dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port); |
| return port; |
| } |
| tup->uport.line = port; |
| |
| tup->enable_modem_interrupt = of_property_read_bool(np, |
| "nvidia,enable-modem-interrupt"); |
| return 0; |
| } |
| |
| static struct tegra_uart_chip_data tegra20_uart_chip_data = { |
| .tx_fifo_full_status = false, |
| .allow_txfifo_reset_fifo_mode = true, |
| .support_clk_src_div = false, |
| }; |
| |
| static struct tegra_uart_chip_data tegra30_uart_chip_data = { |
| .tx_fifo_full_status = true, |
| .allow_txfifo_reset_fifo_mode = false, |
| .support_clk_src_div = true, |
| }; |
| |
| static struct of_device_id tegra_uart_of_match[] = { |
| { |
| .compatible = "nvidia,tegra30-hsuart", |
| .data = &tegra30_uart_chip_data, |
| }, { |
| .compatible = "nvidia,tegra20-hsuart", |
| .data = &tegra20_uart_chip_data, |
| }, { |
| }, |
| }; |
| MODULE_DEVICE_TABLE(of, tegra_uart_of_match); |
| |
| static int tegra_uart_probe(struct platform_device *pdev) |
| { |
| struct tegra_uart_port *tup; |
| struct uart_port *u; |
| struct resource *resource; |
| int ret; |
| const struct tegra_uart_chip_data *cdata; |
| const struct of_device_id *match; |
| |
| match = of_match_device(tegra_uart_of_match, &pdev->dev); |
| if (!match) { |
| dev_err(&pdev->dev, "Error: No device match found\n"); |
| return -ENODEV; |
| } |
| cdata = match->data; |
| |
| tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL); |
| if (!tup) { |
| dev_err(&pdev->dev, "Failed to allocate memory for tup\n"); |
| return -ENOMEM; |
| } |
| |
| ret = tegra_uart_parse_dt(pdev, tup); |
| if (ret < 0) |
| return ret; |
| |
| u = &tup->uport; |
| u->dev = &pdev->dev; |
| u->ops = &tegra_uart_ops; |
| u->type = PORT_TEGRA; |
| u->fifosize = 32; |
| tup->cdata = cdata; |
| |
| platform_set_drvdata(pdev, tup); |
| resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!resource) { |
| dev_err(&pdev->dev, "No IO memory resource\n"); |
| return -ENODEV; |
| } |
| |
| u->mapbase = resource->start; |
| u->membase = devm_ioremap_resource(&pdev->dev, resource); |
| if (IS_ERR(u->membase)) |
| return PTR_ERR(u->membase); |
| |
| tup->uart_clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(tup->uart_clk)) { |
| dev_err(&pdev->dev, "Couldn't get the clock\n"); |
| return PTR_ERR(tup->uart_clk); |
| } |
| |
| tup->rst = devm_reset_control_get(&pdev->dev, "serial"); |
| if (IS_ERR(tup->rst)) { |
| dev_err(&pdev->dev, "Couldn't get the reset\n"); |
| return PTR_ERR(tup->rst); |
| } |
| |
| u->iotype = UPIO_MEM32; |
| u->irq = platform_get_irq(pdev, 0); |
| u->regshift = 2; |
| ret = uart_add_one_port(&tegra_uart_driver, u); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret); |
| return ret; |
| } |
| return ret; |
| } |
| |
| static int tegra_uart_remove(struct platform_device *pdev) |
| { |
| struct tegra_uart_port *tup = platform_get_drvdata(pdev); |
| struct uart_port *u = &tup->uport; |
| |
| uart_remove_one_port(&tegra_uart_driver, u); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int tegra_uart_suspend(struct device *dev) |
| { |
| struct tegra_uart_port *tup = dev_get_drvdata(dev); |
| struct uart_port *u = &tup->uport; |
| |
| return uart_suspend_port(&tegra_uart_driver, u); |
| } |
| |
| static int tegra_uart_resume(struct device *dev) |
| { |
| struct tegra_uart_port *tup = dev_get_drvdata(dev); |
| struct uart_port *u = &tup->uport; |
| |
| return uart_resume_port(&tegra_uart_driver, u); |
| } |
| #endif |
| |
| static const struct dev_pm_ops tegra_uart_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(tegra_uart_suspend, tegra_uart_resume) |
| }; |
| |
| static struct platform_driver tegra_uart_platform_driver = { |
| .probe = tegra_uart_probe, |
| .remove = tegra_uart_remove, |
| .driver = { |
| .name = "serial-tegra", |
| .of_match_table = tegra_uart_of_match, |
| .pm = &tegra_uart_pm_ops, |
| }, |
| }; |
| |
| static int __init tegra_uart_init(void) |
| { |
| int ret; |
| |
| ret = uart_register_driver(&tegra_uart_driver); |
| if (ret < 0) { |
| pr_err("Could not register %s driver\n", |
| tegra_uart_driver.driver_name); |
| return ret; |
| } |
| |
| ret = platform_driver_register(&tegra_uart_platform_driver); |
| if (ret < 0) { |
| pr_err("Uart platform driver register failed, e = %d\n", ret); |
| uart_unregister_driver(&tegra_uart_driver); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void __exit tegra_uart_exit(void) |
| { |
| pr_info("Unloading tegra uart driver\n"); |
| platform_driver_unregister(&tegra_uart_platform_driver); |
| uart_unregister_driver(&tegra_uart_driver); |
| } |
| |
| module_init(tegra_uart_init); |
| module_exit(tegra_uart_exit); |
| |
| MODULE_ALIAS("platform:serial-tegra"); |
| MODULE_DESCRIPTION("High speed UART driver for tegra chipset"); |
| MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); |
| MODULE_LICENSE("GPL v2"); |