drivers/regulator/max1586.c - kernel/msm-4.19 - Gitiles

 /*
  * max1586.c  --  Voltage and current regulation for the Maxim 1586
  *
  * Copyright (C) 2008 Robert Jarzmik
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/slab.h>
 #include <linux/regulator/max1586.h>
 #include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>

 #define MAX1586_V3_MAX_VSEL 31
 #define MAX1586_V6_MAX_VSEL 3

 #define MAX1586_V3_MIN_UV   700000
 #define MAX1586_V3_MAX_UV  1475000

 #define MAX1586_V6_MIN_UV        0
 #define MAX1586_V6_MAX_UV  3000000

 #define I2C_V3_SELECT (0 << 5)
 #define I2C_V6_SELECT (1 << 5)

 struct max1586_data {
 	struct i2c_client *client;

 	/* min/max V3 voltage */
 	unsigned int min_uV;
 	unsigned int max_uV;

 	unsigned int v3_curr_sel;
 	unsigned int v6_curr_sel;
 };

 /*
  * V6 voltage
  * On I2C bus, sending a "x" byte to the max1586 means :
  *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
  * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
  */
 static const unsigned int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };

 /*
  * V3 voltage
  * On I2C bus, sending a "x" byte to the max1586 means :
  *   set V3 to 0.700V + (x & 0x1f) * 0.025V
  * This voltage can be increased by external resistors
  * R24 and R25=100kOhm as described in the data sheet.
  * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
  */
 static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct max1586_data *max1586 = rdev_get_drvdata(rdev);

 	return max1586->v3_curr_sel;
 }

 static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
 				      unsigned selector)
 {
 	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
 	struct i2c_client *client = max1586->client;
 	int ret;
 	u8 v3_prog;

 	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
 		regulator_list_voltage_linear(rdev, selector) / 1000);

 	v3_prog = I2C_V3_SELECT | (u8) selector;
 	ret = i2c_smbus_write_byte(client, v3_prog);
 	if (ret)
 		return ret;

 	max1586->v3_curr_sel = selector;

 	return 0;
 }

 static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct max1586_data *max1586 = rdev_get_drvdata(rdev);

 	return max1586->v6_curr_sel;
 }

 static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
 				      unsigned int selector)
 {
 	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
 	struct i2c_client *client = max1586->client;
 	u8 v6_prog;
 	int ret;

 	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
 		rdev->desc->volt_table[selector] / 1000);

 	v6_prog = I2C_V6_SELECT | (u8) selector;
 	ret = i2c_smbus_write_byte(client, v6_prog);
 	if (ret)
 		return ret;

 	max1586->v6_curr_sel = selector;

 	return 0;
 }

 /*
  * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
  * the set up value.
  */
 static struct regulator_ops max1586_v3_ops = {
 	.get_voltage_sel = max1586_v3_get_voltage_sel,
 	.set_voltage_sel = max1586_v3_set_voltage_sel,
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 };

 static struct regulator_ops max1586_v6_ops = {
 	.get_voltage_sel = max1586_v6_get_voltage_sel,
 	.set_voltage_sel = max1586_v6_set_voltage_sel,
 	.list_voltage = regulator_list_voltage_table,
 };

 static struct regulator_desc max1586_reg[] = {
 	{
 		.name = "Output_V3",
 		.id = MAX1586_V3,
 		.ops = &max1586_v3_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = MAX1586_V3_MAX_VSEL + 1,
 		.owner = THIS_MODULE,
 	},
 	{
 		.name = "Output_V6",
 		.id = MAX1586_V6,
 		.ops = &max1586_v6_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = MAX1586_V6_MAX_VSEL + 1,
 		.volt_table = v6_voltages_uv,
 		.owner = THIS_MODULE,
 	},
 };

 static int of_get_max1586_platform_data(struct device *dev,
 				 struct max1586_platform_data *pdata)
 {
 	struct max1586_subdev_data *sub;
 	struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
 	struct device_node *np = dev->of_node;
 	int i, matched;

 	if (of_property_read_u32(np, "v3-gain",
 				 &pdata->v3_gain) < 0) {
 		dev_err(dev, "%s has no 'v3-gain' property\n", np->full_name);
 		return -EINVAL;
 	}

 	np = of_get_child_by_name(np, "regulators");
 	if (!np) {
 		dev_err(dev, "missing 'regulators' subnode in DT\n");
 		return -EINVAL;
 	}

 	for (i = 0; i < ARRAY_SIZE(rmatch); i++)
 		rmatch[i].name = max1586_reg[i].name;

 	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
 	of_node_put(np);
 	/*
 	 * If matched is 0, ie. neither Output_V3 nor Output_V6 have been found,
 	 * return 0, which signals the normal situation where no subregulator is
 	 * available. This is normal because the max1586 doesn't provide any
 	 * readback support, so the subregulators can't report any status
 	 * anyway.  If matched < 0, return the error.
 	 */
 	if (matched <= 0)
 		return matched;

 	pdata->subdevs = devm_kzalloc(dev, sizeof(struct max1586_subdev_data) *
 						matched, GFP_KERNEL);
 	if (!pdata->subdevs)
 		return -ENOMEM;

 	pdata->num_subdevs = matched;
 	sub = pdata->subdevs;

 	for (i = 0; i < matched; i++) {
 		sub->id = i;
 		sub->name = rmatch[i].of_node->name;
 		sub->platform_data = rmatch[i].init_data;
 		sub++;
 	}

 	return 0;
 }

 static const struct of_device_id max1586_of_match[] = {
 	{ .compatible = "maxim,max1586", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, max1586_of_match);

 static int max1586_pmic_probe(struct i2c_client *client,
 					const struct i2c_device_id *i2c_id)
 {
 	struct max1586_platform_data *pdata, pdata_of;
 	struct regulator_config config = { };
 	struct max1586_data *max1586;
 	int i, id, ret;
 	const struct of_device_id *match;

 	pdata = dev_get_platdata(&client->dev);
 	if (client->dev.of_node && !pdata) {
 		match = of_match_device(of_match_ptr(max1586_of_match),
 					&client->dev);
 		if (!match) {
 			dev_err(&client->dev, "Error: No device match found\n");
 			return -ENODEV;
 		}
 		ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
 		if (ret < 0)
 			return ret;
 		pdata = &pdata_of;
 	}

 	max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
 			GFP_KERNEL);
 	if (!max1586)
 		return -ENOMEM;

 	max1586->client = client;

 	if (!pdata->v3_gain)
 		return -EINVAL;

 	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
 	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;

 	/* Set curr_sel to default voltage on power-up */
 	max1586->v3_curr_sel = 24; /* 1.3V */
 	max1586->v6_curr_sel = 0;

 	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
 		struct regulator_dev *rdev;

 		id = pdata->subdevs[i].id;
 		if (!pdata->subdevs[i].platform_data)
 			continue;
 		if (id < MAX1586_V3 || id > MAX1586_V6) {
 			dev_err(&client->dev, "invalid regulator id %d\n", id);
 			return -EINVAL;
 		}

 		if (id == MAX1586_V3) {
 			max1586_reg[id].min_uV = max1586->min_uV;
 			max1586_reg[id].uV_step =
 					(max1586->max_uV - max1586->min_uV) /
 					MAX1586_V3_MAX_VSEL;
 		}

 		config.dev = &client->dev;
 		config.init_data = pdata->subdevs[i].platform_data;
 		config.driver_data = max1586;

 		rdev = devm_regulator_register(&client->dev,
 						  &max1586_reg[id], &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&client->dev, "failed to register %s\n",
 				max1586_reg[id].name);
 			return PTR_ERR(rdev);
 		}
 	}

 	i2c_set_clientdata(client, max1586);
 	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
 	return 0;
 }

 static const struct i2c_device_id max1586_id[] = {
 	{ "max1586", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, max1586_id);

 static struct i2c_driver max1586_pmic_driver = {
 	.probe = max1586_pmic_probe,
 	.driver		= {
 		.name	= "max1586",
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(max1586_of_match),
 	},
 	.id_table	= max1586_id,
 };

 static int __init max1586_pmic_init(void)
 {
 	return i2c_add_driver(&max1586_pmic_driver);
 }
 subsys_initcall(max1586_pmic_init);

 static void __exit max1586_pmic_exit(void)
 {
 	i2c_del_driver(&max1586_pmic_driver);
 }
 module_exit(max1586_pmic_exit);

 /* Module information */
 MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
 MODULE_AUTHOR("Robert Jarzmik");
 MODULE_LICENSE("GPL");
	/*
	* max1586.c -- Voltage and current regulation for the Maxim 1586
	*
	* Copyright (C) 2008 Robert Jarzmik
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/
	#include <linux/module.h>
	#include <linux/err.h>
	#include <linux/i2c.h>
	#include <linux/platform_device.h>
	#include <linux/regulator/driver.h>
	#include <linux/slab.h>
	#include <linux/regulator/max1586.h>
	#include <linux/of_device.h>
	#include <linux/regulator/of_regulator.h>

	#define MAX1586_V3_MAX_VSEL 31
	#define MAX1586_V6_MAX_VSEL 3

	#define MAX1586_V3_MIN_UV 700000
	#define MAX1586_V3_MAX_UV 1475000

	#define MAX1586_V6_MIN_UV 0
	#define MAX1586_V6_MAX_UV 3000000

	#define I2C_V3_SELECT (0 << 5)
	#define I2C_V6_SELECT (1 << 5)

	struct max1586_data {
	struct i2c_client *client;

	/* min/max V3 voltage */
	unsigned int min_uV;
	unsigned int max_uV;

	unsigned int v3_curr_sel;
	unsigned int v6_curr_sel;
	};

	/*
	* V6 voltage
	* On I2C bus, sending a "x" byte to the max1586 means :
	* set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
	* As regulator framework doesn't accept voltages to be 0V, we use 1uV.
	*/
	static const unsigned int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };

	/*
	* V3 voltage
	* On I2C bus, sending a "x" byte to the max1586 means :
	* set V3 to 0.700V + (x & 0x1f) * 0.025V
	* This voltage can be increased by external resistors
	* R24 and R25=100kOhm as described in the data sheet.
	* The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
	*/
	static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
	{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);

	return max1586->v3_curr_sel;
	}

	static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
	unsigned selector)
	{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
	struct i2c_client *client = max1586->client;
	int ret;
	u8 v3_prog;

	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
	regulator_list_voltage_linear(rdev, selector) / 1000);

	v3_prog = I2C_V3_SELECT \| (u8) selector;
	ret = i2c_smbus_write_byte(client, v3_prog);
	if (ret)
	return ret;

	max1586->v3_curr_sel = selector;

	return 0;
	}

	static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
	{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);

	return max1586->v6_curr_sel;
	}

	static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
	unsigned int selector)
	{
	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
	struct i2c_client *client = max1586->client;
	u8 v6_prog;
	int ret;

	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
	rdev->desc->volt_table[selector] / 1000);

	v6_prog = I2C_V6_SELECT \| (u8) selector;
	ret = i2c_smbus_write_byte(client, v6_prog);
	if (ret)
	return ret;

	max1586->v6_curr_sel = selector;

	return 0;
	}

	/*
	* The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
	* the set up value.
	*/
	static struct regulator_ops max1586_v3_ops = {
	.get_voltage_sel = max1586_v3_get_voltage_sel,
	.set_voltage_sel = max1586_v3_set_voltage_sel,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	};

	static struct regulator_ops max1586_v6_ops = {
	.get_voltage_sel = max1586_v6_get_voltage_sel,
	.set_voltage_sel = max1586_v6_set_voltage_sel,
	.list_voltage = regulator_list_voltage_table,
	};

	static struct regulator_desc max1586_reg[] = {
	{
	.name = "Output_V3",
	.id = MAX1586_V3,
	.ops = &max1586_v3_ops,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = MAX1586_V3_MAX_VSEL + 1,
	.owner = THIS_MODULE,
	},
	{
	.name = "Output_V6",
	.id = MAX1586_V6,
	.ops = &max1586_v6_ops,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = MAX1586_V6_MAX_VSEL + 1,
	.volt_table = v6_voltages_uv,
	.owner = THIS_MODULE,
	},
	};

	static int of_get_max1586_platform_data(struct device *dev,
	struct max1586_platform_data *pdata)
	{
	struct max1586_subdev_data *sub;
	struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
	struct device_node *np = dev->of_node;
	int i, matched;

	if (of_property_read_u32(np, "v3-gain",
	&pdata->v3_gain) < 0) {
	dev_err(dev, "%s has no 'v3-gain' property\n", np->full_name);
	return -EINVAL;
	}

	np = of_get_child_by_name(np, "regulators");
	if (!np) {
	dev_err(dev, "missing 'regulators' subnode in DT\n");
	return -EINVAL;
	}

	for (i = 0; i < ARRAY_SIZE(rmatch); i++)
	rmatch[i].name = max1586_reg[i].name;

	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
	of_node_put(np);
	/*
	* If matched is 0, ie. neither Output_V3 nor Output_V6 have been found,
	* return 0, which signals the normal situation where no subregulator is
	* available. This is normal because the max1586 doesn't provide any
	* readback support, so the subregulators can't report any status
	* anyway. If matched < 0, return the error.
	*/
	if (matched <= 0)
	return matched;

	pdata->subdevs = devm_kzalloc(dev, sizeof(struct max1586_subdev_data) *
	matched, GFP_KERNEL);
	if (!pdata->subdevs)
	return -ENOMEM;

	pdata->num_subdevs = matched;
	sub = pdata->subdevs;

	for (i = 0; i < matched; i++) {
	sub->id = i;
	sub->name = rmatch[i].of_node->name;
	sub->platform_data = rmatch[i].init_data;
	sub++;
	}

	return 0;
	}

	static const struct of_device_id max1586_of_match[] = {
	{ .compatible = "maxim,max1586", },
	{},
	};
	MODULE_DEVICE_TABLE(of, max1586_of_match);

	static int max1586_pmic_probe(struct i2c_client *client,
	const struct i2c_device_id *i2c_id)
	{
	struct max1586_platform_data *pdata, pdata_of;
	struct regulator_config config = { };
	struct max1586_data *max1586;
	int i, id, ret;
	const struct of_device_id *match;

	pdata = dev_get_platdata(&client->dev);
	if (client->dev.of_node && !pdata) {
	match = of_match_device(of_match_ptr(max1586_of_match),
	&client->dev);
	if (!match) {
	dev_err(&client->dev, "Error: No device match found\n");
	return -ENODEV;
	}
	ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
	if (ret < 0)
	return ret;
	pdata = &pdata_of;
	}

	max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
	GFP_KERNEL);
	if (!max1586)
	return -ENOMEM;

	max1586->client = client;

	if (!pdata->v3_gain)
	return -EINVAL;

	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;

	/* Set curr_sel to default voltage on power-up */
	max1586->v3_curr_sel = 24; /* 1.3V */
	max1586->v6_curr_sel = 0;

	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
	struct regulator_dev *rdev;

	id = pdata->subdevs[i].id;
	if (!pdata->subdevs[i].platform_data)
	continue;
	if (id < MAX1586_V3 \|\| id > MAX1586_V6) {
	dev_err(&client->dev, "invalid regulator id %d\n", id);
	return -EINVAL;
	}

	if (id == MAX1586_V3) {
	max1586_reg[id].min_uV = max1586->min_uV;
	max1586_reg[id].uV_step =
	(max1586->max_uV - max1586->min_uV) /
	MAX1586_V3_MAX_VSEL;
	}

	config.dev = &client->dev;
	config.init_data = pdata->subdevs[i].platform_data;
	config.driver_data = max1586;

	rdev = devm_regulator_register(&client->dev,
	&max1586_reg[id], &config);
	if (IS_ERR(rdev)) {
	dev_err(&client->dev, "failed to register %s\n",
	max1586_reg[id].name);
	return PTR_ERR(rdev);
	}
	}

	i2c_set_clientdata(client, max1586);
	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
	return 0;
	}

	static const struct i2c_device_id max1586_id[] = {
	{ "max1586", 0 },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, max1586_id);

	static struct i2c_driver max1586_pmic_driver = {
	.probe = max1586_pmic_probe,
	.driver = {
	.name = "max1586",
	.owner = THIS_MODULE,
	.of_match_table = of_match_ptr(max1586_of_match),
	},
	.id_table = max1586_id,
	};

	static int __init max1586_pmic_init(void)
	{
	return i2c_add_driver(&max1586_pmic_driver);
	}
	subsys_initcall(max1586_pmic_init);

	static void __exit max1586_pmic_exit(void)
	{
	i2c_del_driver(&max1586_pmic_driver);
	}
	module_exit(max1586_pmic_exit);

	/* Module information */
	MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
	MODULE_AUTHOR("Robert Jarzmik");
	MODULE_LICENSE("GPL");