| /* |
| * bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform |
| * (derived from bytcr_rt5640.c) |
| * |
| * Copyright (C) 2015 Intel Corp |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/dmi.h> |
| #include <linux/slab.h> |
| #include <asm/platform_sst_audio.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/jack.h> |
| #include <sound/soc-acpi.h> |
| #include "../../codecs/rt5651.h" |
| #include "../atom/sst-atom-controls.h" |
| |
| enum { |
| BYT_RT5651_DMIC_MAP, |
| BYT_RT5651_IN1_MAP, |
| BYT_RT5651_IN2_MAP, |
| }; |
| |
| #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) |
| #define BYT_RT5651_DMIC_EN BIT(16) |
| #define BYT_RT5651_MCLK_EN BIT(17) |
| #define BYT_RT5651_MCLK_25MHZ BIT(18) |
| |
| struct byt_rt5651_private { |
| struct clk *mclk; |
| struct snd_soc_jack jack; |
| }; |
| |
| static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP | |
| BYT_RT5651_DMIC_EN | |
| BYT_RT5651_MCLK_EN; |
| |
| static void log_quirks(struct device *dev) |
| { |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) |
| dev_info(dev, "quirk DMIC_MAP enabled"); |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) |
| dev_info(dev, "quirk IN1_MAP enabled"); |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) |
| dev_info(dev, "quirk IN2_MAP enabled"); |
| if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) |
| dev_info(dev, "quirk DMIC enabled"); |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) |
| dev_info(dev, "quirk MCLK_EN enabled"); |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) |
| dev_info(dev, "quirk MCLK_25MHZ enabled"); |
| } |
| |
| #define BYT_CODEC_DAI1 "rt5651-aif1" |
| |
| static int platform_clock_control(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| struct snd_soc_dapm_context *dapm = w->dapm; |
| struct snd_soc_card *card = dapm->card; |
| struct snd_soc_dai *codec_dai; |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| int ret; |
| |
| codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); |
| if (!codec_dai) { |
| dev_err(card->dev, |
| "Codec dai not found; Unable to set platform clock\n"); |
| return -EIO; |
| } |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) { |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { |
| ret = clk_prepare_enable(priv->mclk); |
| if (ret < 0) { |
| dev_err(card->dev, |
| "could not configure MCLK state"); |
| return ret; |
| } |
| } |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, |
| 48000 * 512, |
| SND_SOC_CLOCK_IN); |
| } else { |
| /* |
| * Set codec clock source to internal clock before |
| * turning off the platform clock. Codec needs clock |
| * for Jack detection and button press |
| */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, |
| 48000 * 512, |
| SND_SOC_CLOCK_IN); |
| if (!ret) |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) |
| clk_disable_unprepare(priv->mclk); |
| } |
| |
| if (ret < 0) { |
| dev_err(card->dev, "can't set codec sysclk: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { |
| SND_SOC_DAPM_HP("Headphone", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("Internal Mic", NULL), |
| SND_SOC_DAPM_SPK("Speaker", NULL), |
| SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, |
| platform_clock_control, SND_SOC_DAPM_PRE_PMU | |
| SND_SOC_DAPM_POST_PMD), |
| |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { |
| {"Headphone", NULL, "Platform Clock"}, |
| {"Headset Mic", NULL, "Platform Clock"}, |
| {"Internal Mic", NULL, "Platform Clock"}, |
| {"Speaker", NULL, "Platform Clock"}, |
| |
| {"AIF1 Playback", NULL, "ssp2 Tx"}, |
| {"ssp2 Tx", NULL, "codec_out0"}, |
| {"ssp2 Tx", NULL, "codec_out1"}, |
| {"codec_in0", NULL, "ssp2 Rx"}, |
| {"codec_in1", NULL, "ssp2 Rx"}, |
| {"ssp2 Rx", NULL, "AIF1 Capture"}, |
| |
| {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ |
| {"Headphone", NULL, "HPOL"}, |
| {"Headphone", NULL, "HPOR"}, |
| {"Speaker", NULL, "LOUTL"}, |
| {"Speaker", NULL, "LOUTR"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { |
| {"IN2P", NULL, "Headset Mic"}, |
| {"DMIC L1", NULL, "Internal Mic"}, |
| {"DMIC R1", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { |
| {"Internal Mic", NULL, "micbias1"}, |
| {"IN2P", NULL, "Headset Mic"}, |
| {"IN1P", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { |
| {"Internal Mic", NULL, "micbias1"}, |
| {"IN1P", NULL, "Headset Mic"}, |
| {"IN2P", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_kcontrol_new byt_rt5651_controls[] = { |
| SOC_DAPM_PIN_SWITCH("Headphone"), |
| SOC_DAPM_PIN_SWITCH("Headset Mic"), |
| SOC_DAPM_PIN_SWITCH("Internal Mic"), |
| SOC_DAPM_PIN_SWITCH("Speaker"), |
| }; |
| |
| static struct snd_soc_jack_pin bytcr_jack_pins[] = { |
| { |
| .pin = "Headphone", |
| .mask = SND_JACK_HEADPHONE, |
| }, |
| { |
| .pin = "Headset Mic", |
| .mask = SND_JACK_MICROPHONE, |
| }, |
| }; |
| |
| static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| int ret; |
| |
| snd_soc_dai_set_bclk_ratio(codec_dai, 50); |
| |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, |
| params_rate(params) * 512, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set codec clock %d\n", ret); |
| return ret; |
| } |
| |
| if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { |
| /* 2x25 bit slots on SSP2 */ |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5651_PLL1_S_BCLK1, |
| params_rate(params) * 50, |
| params_rate(params) * 512); |
| } else { |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) { |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5651_PLL1_S_MCLK, |
| 25000000, |
| params_rate(params) * 512); |
| } else { |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5651_PLL1_S_MCLK, |
| 19200000, |
| params_rate(params) * 512); |
| } |
| } |
| |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set codec pll: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) |
| { |
| byt_rt5651_quirk = (unsigned long)id->driver_data; |
| return 1; |
| } |
| |
| static const struct dmi_system_id byt_rt5651_quirk_table[] = { |
| { |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DMIC_MAP | |
| BYT_RT5651_DMIC_EN), |
| }, |
| { |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_IN2_MAP), |
| }, |
| {} |
| }; |
| |
| static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) |
| { |
| struct snd_soc_card *card = runtime->card; |
| struct snd_soc_codec *codec = runtime->codec; |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| const struct snd_soc_dapm_route *custom_map; |
| int num_routes; |
| int ret; |
| |
| card->dapm.idle_bias_off = true; |
| |
| switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { |
| case BYT_RT5651_IN1_MAP: |
| custom_map = byt_rt5651_intmic_in1_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); |
| break; |
| case BYT_RT5651_IN2_MAP: |
| custom_map = byt_rt5651_intmic_in2_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); |
| break; |
| default: |
| custom_map = byt_rt5651_intmic_dmic_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); |
| } |
| ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); |
| if (ret) |
| return ret; |
| |
| ret = snd_soc_add_card_controls(card, byt_rt5651_controls, |
| ARRAY_SIZE(byt_rt5651_controls)); |
| if (ret) { |
| dev_err(card->dev, "unable to add card controls\n"); |
| return ret; |
| } |
| snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); |
| snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); |
| |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { |
| /* |
| * The firmware might enable the clock at |
| * boot (this information may or may not |
| * be reflected in the enable clock register). |
| * To change the rate we must disable the clock |
| * first to cover these cases. Due to common |
| * clock framework restrictions that do not allow |
| * to disable a clock that has not been enabled, |
| * we need to enable the clock first. |
| */ |
| ret = clk_prepare_enable(priv->mclk); |
| if (!ret) |
| clk_disable_unprepare(priv->mclk); |
| |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) |
| ret = clk_set_rate(priv->mclk, 25000000); |
| else |
| ret = clk_set_rate(priv->mclk, 19200000); |
| |
| if (ret) |
| dev_err(card->dev, "unable to set MCLK rate\n"); |
| } |
| |
| ret = snd_soc_card_jack_new(runtime->card, "Headset", |
| SND_JACK_HEADSET, &priv->jack, |
| bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins)); |
| if (ret) { |
| dev_err(runtime->dev, "Headset jack creation failed %d\n", ret); |
| return ret; |
| } |
| |
| rt5651_set_jack_detect(codec, &priv->jack); |
| |
| return ret; |
| } |
| |
| static const struct snd_soc_pcm_stream byt_rt5651_dai_params = { |
| .formats = SNDRV_PCM_FMTBIT_S24_LE, |
| .rate_min = 48000, |
| .rate_max = 48000, |
| .channels_min = 2, |
| .channels_max = 2, |
| }; |
| |
| static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| int ret; |
| |
| /* The DSP will covert the FE rate to 48k, stereo, 24bits */ |
| rate->min = rate->max = 48000; |
| channels->min = channels->max = 2; |
| |
| /* set SSP2 to 24-bit */ |
| params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); |
| |
| /* |
| * Default mode for SSP configuration is TDM 4 slot, override config |
| * with explicit setting to I2S 2ch 24-bit. The word length is set with |
| * dai_set_tdm_slot() since there is no other API exposed |
| */ |
| ret = snd_soc_dai_set_fmt(rtd->cpu_dai, |
| SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBS_CFS |
| ); |
| |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const unsigned int rates_48000[] = { |
| 48000, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list constraints_48000 = { |
| .count = ARRAY_SIZE(rates_48000), |
| .list = rates_48000, |
| }; |
| |
| static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream) |
| { |
| return snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &constraints_48000); |
| } |
| |
| static const struct snd_soc_ops byt_rt5651_aif1_ops = { |
| .startup = byt_rt5651_aif1_startup, |
| }; |
| |
| static const struct snd_soc_ops byt_rt5651_be_ssp2_ops = { |
| .hw_params = byt_rt5651_aif1_hw_params, |
| }; |
| |
| static struct snd_soc_dai_link byt_rt5651_dais[] = { |
| [MERR_DPCM_AUDIO] = { |
| .name = "Audio Port", |
| .stream_name = "Audio", |
| .cpu_dai_name = "media-cpu-dai", |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| .platform_name = "sst-mfld-platform", |
| .nonatomic = true, |
| .dynamic = 1, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .ops = &byt_rt5651_aif1_ops, |
| }, |
| [MERR_DPCM_DEEP_BUFFER] = { |
| .name = "Deep-Buffer Audio Port", |
| .stream_name = "Deep-Buffer Audio", |
| .cpu_dai_name = "deepbuffer-cpu-dai", |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| .platform_name = "sst-mfld-platform", |
| .nonatomic = true, |
| .dynamic = 1, |
| .dpcm_playback = 1, |
| .ops = &byt_rt5651_aif1_ops, |
| }, |
| /* CODEC<->CODEC link */ |
| /* back ends */ |
| { |
| .name = "SSP2-Codec", |
| .id = 0, |
| .cpu_dai_name = "ssp2-port", |
| .platform_name = "sst-mfld-platform", |
| .no_pcm = 1, |
| .codec_dai_name = "rt5651-aif1", |
| .codec_name = "i2c-10EC5651:00", |
| .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
| | SND_SOC_DAIFMT_CBS_CFS, |
| .be_hw_params_fixup = byt_rt5651_codec_fixup, |
| .ignore_suspend = 1, |
| .nonatomic = true, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .init = byt_rt5651_init, |
| .ops = &byt_rt5651_be_ssp2_ops, |
| }, |
| }; |
| |
| /* SoC card */ |
| static struct snd_soc_card byt_rt5651_card = { |
| .name = "bytcr-rt5651", |
| .owner = THIS_MODULE, |
| .dai_link = byt_rt5651_dais, |
| .num_links = ARRAY_SIZE(byt_rt5651_dais), |
| .dapm_widgets = byt_rt5651_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets), |
| .dapm_routes = byt_rt5651_audio_map, |
| .num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map), |
| .fully_routed = true, |
| }; |
| |
| static char byt_rt5651_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */ |
| |
| static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) |
| { |
| struct byt_rt5651_private *priv; |
| struct snd_soc_acpi_mach *mach; |
| const char *i2c_name = NULL; |
| int ret_val = 0; |
| int dai_index = 0; |
| int i; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); |
| if (!priv) |
| return -ENOMEM; |
| |
| /* register the soc card */ |
| byt_rt5651_card.dev = &pdev->dev; |
| |
| mach = byt_rt5651_card.dev->platform_data; |
| snd_soc_card_set_drvdata(&byt_rt5651_card, priv); |
| |
| /* fix index of codec dai */ |
| for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { |
| if (!strcmp(byt_rt5651_dais[i].codec_name, "i2c-10EC5651:00")) { |
| dai_index = i; |
| break; |
| } |
| } |
| |
| /* fixup codec name based on HID */ |
| i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); |
| if (i2c_name) { |
| snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), |
| "%s%s", "i2c-", i2c_name); |
| |
| byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; |
| } |
| |
| /* check quirks before creating card */ |
| dmi_check_system(byt_rt5651_quirk_table); |
| log_quirks(&pdev->dev); |
| |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { |
| priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); |
| if (IS_ERR(priv->mclk)) { |
| dev_err(&pdev->dev, |
| "Failed to get MCLK from pmc_plt_clk_3: %ld\n", |
| PTR_ERR(priv->mclk)); |
| /* |
| * Fall back to bit clock usage for -ENOENT (clock not |
| * available likely due to missing dependencies), bail |
| * for all other errors, including -EPROBE_DEFER |
| */ |
| if (ret_val != -ENOENT) |
| return ret_val; |
| byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; |
| } |
| } |
| |
| ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); |
| |
| if (ret_val) { |
| dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", |
| ret_val); |
| return ret_val; |
| } |
| platform_set_drvdata(pdev, &byt_rt5651_card); |
| return ret_val; |
| } |
| |
| static struct platform_driver snd_byt_rt5651_mc_driver = { |
| .driver = { |
| .name = "bytcr_rt5651", |
| }, |
| .probe = snd_byt_rt5651_mc_probe, |
| }; |
| |
| module_platform_driver(snd_byt_rt5651_mc_driver); |
| |
| MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651"); |
| MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:bytcr_rt5651"); |