| /* |
| * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips |
| * Copyright (c) 2008-2009 Marvell Semiconductor |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/phy.h> |
| #include <net/dsa.h> |
| #include "mv88e6060.h" |
| |
| static int reg_read(struct dsa_switch *ds, int addr, int reg) |
| { |
| struct mv88e6060_priv *priv = ds->priv; |
| |
| return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg); |
| } |
| |
| #define REG_READ(addr, reg) \ |
| ({ \ |
| int __ret; \ |
| \ |
| __ret = reg_read(ds, addr, reg); \ |
| if (__ret < 0) \ |
| return __ret; \ |
| __ret; \ |
| }) |
| |
| |
| static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) |
| { |
| struct mv88e6060_priv *priv = ds->priv; |
| |
| return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val); |
| } |
| |
| #define REG_WRITE(addr, reg, val) \ |
| ({ \ |
| int __ret; \ |
| \ |
| __ret = reg_write(ds, addr, reg, val); \ |
| if (__ret < 0) \ |
| return __ret; \ |
| }) |
| |
| static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr) |
| { |
| int ret; |
| |
| ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID); |
| if (ret >= 0) { |
| if (ret == PORT_SWITCH_ID_6060) |
| return "Marvell 88E6060 (A0)"; |
| if (ret == PORT_SWITCH_ID_6060_R1 || |
| ret == PORT_SWITCH_ID_6060_R2) |
| return "Marvell 88E6060 (B0)"; |
| if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060) |
| return "Marvell 88E6060"; |
| } |
| |
| return NULL; |
| } |
| |
| static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds) |
| { |
| return DSA_TAG_PROTO_TRAILER; |
| } |
| |
| static const char *mv88e6060_drv_probe(struct device *dsa_dev, |
| struct device *host_dev, int sw_addr, |
| void **_priv) |
| { |
| struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev); |
| struct mv88e6060_priv *priv; |
| const char *name; |
| |
| name = mv88e6060_get_name(bus, sw_addr); |
| if (name) { |
| priv = devm_kzalloc(dsa_dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return NULL; |
| *_priv = priv; |
| priv->bus = bus; |
| priv->sw_addr = sw_addr; |
| } |
| |
| return name; |
| } |
| |
| static int mv88e6060_switch_reset(struct dsa_switch *ds) |
| { |
| int i; |
| int ret; |
| unsigned long timeout; |
| |
| /* Set all ports to the disabled state. */ |
| for (i = 0; i < MV88E6060_PORTS; i++) { |
| ret = REG_READ(REG_PORT(i), PORT_CONTROL); |
| REG_WRITE(REG_PORT(i), PORT_CONTROL, |
| ret & ~PORT_CONTROL_STATE_MASK); |
| } |
| |
| /* Wait for transmit queues to drain. */ |
| usleep_range(2000, 4000); |
| |
| /* Reset the switch. */ |
| REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL, |
| GLOBAL_ATU_CONTROL_SWRESET | |
| GLOBAL_ATU_CONTROL_ATUSIZE_1024 | |
| GLOBAL_ATU_CONTROL_ATE_AGE_5MIN); |
| |
| /* Wait up to one second for reset to complete. */ |
| timeout = jiffies + 1 * HZ; |
| while (time_before(jiffies, timeout)) { |
| ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS); |
| if (ret & GLOBAL_STATUS_INIT_READY) |
| break; |
| |
| usleep_range(1000, 2000); |
| } |
| if (time_after(jiffies, timeout)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int mv88e6060_setup_global(struct dsa_switch *ds) |
| { |
| /* Disable discarding of frames with excessive collisions, |
| * set the maximum frame size to 1536 bytes, and mask all |
| * interrupt sources. |
| */ |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536); |
| |
| /* Enable automatic address learning, set the address |
| * database size to 1024 entries, and set the default aging |
| * time to 5 minutes. |
| */ |
| REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL, |
| GLOBAL_ATU_CONTROL_ATUSIZE_1024 | |
| GLOBAL_ATU_CONTROL_ATE_AGE_5MIN); |
| |
| return 0; |
| } |
| |
| static int mv88e6060_setup_port(struct dsa_switch *ds, int p) |
| { |
| int addr = REG_PORT(p); |
| |
| /* Do not force flow control, disable Ingress and Egress |
| * Header tagging, disable VLAN tunneling, and set the port |
| * state to Forwarding. Additionally, if this is the CPU |
| * port, enable Ingress and Egress Trailer tagging mode. |
| */ |
| REG_WRITE(addr, PORT_CONTROL, |
| dsa_is_cpu_port(ds, p) ? |
| PORT_CONTROL_TRAILER | |
| PORT_CONTROL_INGRESS_MODE | |
| PORT_CONTROL_STATE_FORWARDING : |
| PORT_CONTROL_STATE_FORWARDING); |
| |
| /* Port based VLAN map: give each port its own address |
| * database, allow the CPU port to talk to each of the 'real' |
| * ports, and allow each of the 'real' ports to only talk to |
| * the CPU port. |
| */ |
| REG_WRITE(addr, PORT_VLAN_MAP, |
| ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) | |
| (dsa_is_cpu_port(ds, p) ? |
| ds->enabled_port_mask : |
| BIT(ds->dst->cpu_port))); |
| |
| /* Port Association Vector: when learning source addresses |
| * of packets, add the address to the address database using |
| * a port bitmap that has only the bit for this port set and |
| * the other bits clear. |
| */ |
| REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p)); |
| |
| return 0; |
| } |
| |
| static int mv88e6060_setup(struct dsa_switch *ds) |
| { |
| int ret; |
| int i; |
| |
| ret = mv88e6060_switch_reset(ds); |
| if (ret < 0) |
| return ret; |
| |
| /* @@@ initialise atu */ |
| |
| ret = mv88e6060_setup_global(ds); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < MV88E6060_PORTS; i++) { |
| ret = mv88e6060_setup_port(ds, i); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr) |
| { |
| /* Use the same MAC Address as FD Pause frames for all ports */ |
| REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]); |
| REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]); |
| REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]); |
| |
| return 0; |
| } |
| |
| static int mv88e6060_port_to_phy_addr(int port) |
| { |
| if (port >= 0 && port < MV88E6060_PORTS) |
| return port; |
| return -1; |
| } |
| |
| static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum) |
| { |
| int addr; |
| |
| addr = mv88e6060_port_to_phy_addr(port); |
| if (addr == -1) |
| return 0xffff; |
| |
| return reg_read(ds, addr, regnum); |
| } |
| |
| static int |
| mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) |
| { |
| int addr; |
| |
| addr = mv88e6060_port_to_phy_addr(port); |
| if (addr == -1) |
| return 0xffff; |
| |
| return reg_write(ds, addr, regnum, val); |
| } |
| |
| static const struct dsa_switch_ops mv88e6060_switch_ops = { |
| .get_tag_protocol = mv88e6060_get_tag_protocol, |
| .probe = mv88e6060_drv_probe, |
| .setup = mv88e6060_setup, |
| .set_addr = mv88e6060_set_addr, |
| .phy_read = mv88e6060_phy_read, |
| .phy_write = mv88e6060_phy_write, |
| }; |
| |
| static struct dsa_switch_driver mv88e6060_switch_drv = { |
| .ops = &mv88e6060_switch_ops, |
| }; |
| |
| static int __init mv88e6060_init(void) |
| { |
| register_switch_driver(&mv88e6060_switch_drv); |
| return 0; |
| } |
| module_init(mv88e6060_init); |
| |
| static void __exit mv88e6060_cleanup(void) |
| { |
| unregister_switch_driver(&mv88e6060_switch_drv); |
| } |
| module_exit(mv88e6060_cleanup); |
| |
| MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); |
| MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:mv88e6060"); |